The IsBech32SegwitPrefix method takes a string prefix and
determines if it is a valid prefix for a Bech32 encoded segwit
address for any of the default or registered networks.
The github markdown interpreter has been changed such that it no longer
allows spaces in between the brackets and parenthesis of links and now
requires a newline in between anchors and other formatting. This
updates all of the markdown files accordingly.
While here, it also corrects a couple of inconsistencies in some of the
README.md files.
This commit adds BIP-9 deployment parameters for all registered
networks for the CSV soft-fork package.
The mainnet and testnet parameters have been set in accordance to the
finalized BIPs.
For simnet, and the regression net, the activation date is back-dated
in order to allow signaling for the soft-fork at any time. Additionally
the expiration time for simnet and regrets has been set to
math.MaxInt64, meaning they’ll never expire.
Now that all softforking is done via BIP0009 versionbits, replace the
old isMajorityVersion deployment mechanism with hard coded historical
block heights at which they became active.
Since the activation heights vary per network, this adds new parameters
to the chaincfg.Params struct for them and sets the correct heights at
which each softfork became active on each chain.
It should be noted that this is a technically hard fork since the
behavior of alternate chain history is different with these hard-coded
activation heights as opposed to the old isMajorityVersion code. In
particular, an alternate chain history could activate one of the soft
forks earlier than these hard-coded heights which means the old code
would reject blocks which violate the new soft fork rules whereas this
new code would not.
However, all of the soft forks this refers to were activated so far in
the chain history there is there is no way a reorg that long could
happen and checkpoints reject alternate chains before the most recent
checkpoint anyways. Furthermore, the same change was made in Bitcoin
Core so this needs to be changed to be consistent anyways.
This commit adds all of the infrastructure needed to support BIP0009
soft forks.
The following is an overview of the changes:
- Add new configuration options to the chaincfg package which allows the
rule deployments to be defined per chain
- Implement code to calculate the threshold state as required by BIP0009
- Use threshold state caches that are stored to the database in order
to accelerate startup time
- Remove caches that are invalid due to definition changes in the
params including additions, deletions, and changes to existing
entries
- Detect and warn when a new unknown rule is about to activate or has
been activated in the block connection code
- Detect and warn when 50% of the last 100 blocks have unexpected
versions.
- Remove the latest block version from wire since it no longer applies
- Add a version parameter to the wire.NewBlockHeader function since the
default is no longer available
- Update the miner block template generation code to use the calculated
block version based on the currently defined rule deployments and
their threshold states as of the previous block
- Add tests for new error type
- Add tests for threshold state cache
This moves several of the chain constants to the Params struct in the
chaincfg package which is intended for that purpose. This is mostly a
backport of the same modifications made in Decred along with a few
additional things cleaned up.
The following is an overview of the changes:
- Comment all fields in the Params struct definition
- Add locals to BlockChain instance for the calculated values based on
the provided chain params
- Rename the following param fields:
- SubsidyHalvingInterval -> SubsidyReductionInterval
- ResetMinDifficulty -> ReduceMinDifficulty
- Add new Param fields:
- CoinbaseMaturity
- TargetTimePerBlock
- TargetTimespan
- BlocksPerRetarget
- RetargetAdjustmentFactor
- MinDiffReductionTime
This is mostly a backport of some of the same modifications made in
Decred along with a few additional things cleaned up. In particular,
this updates the code to make use of the new chainhash package.
Also, since this required API changes anyways and the hash algorithm is
no longer tied specifically to SHA, all other functions throughout the
code base which had "Sha" in their name have been changed to Hash so
they are not incorrectly implying the hash algorithm.
The following is an overview of the changes:
- Remove the wire.ShaHash type
- Update all references to wire.ShaHash to the new chainhash.Hash type
- Rename the following functions and update all references:
- wire.BlockHeader.BlockSha -> BlockHash
- wire.MsgBlock.BlockSha -> BlockHash
- wire.MsgBlock.TxShas -> TxHashes
- wire.MsgTx.TxSha -> TxHash
- blockchain.ShaHashToBig -> HashToBig
- peer.ShaFunc -> peer.HashFunc
- Rename all variables that included sha in their name to include hash
instead
- Update for function name changes in other dependent packages such as
btcutil
- Update copyright dates on all modified files
- Update glide.lock file to use the required version of btcutil
This is a backport of the chainhash package made in Decred along with a
few additional things cleaned up, finished test coverage, and rewording
of some documentation to make it more generic.
In particular, the new package provides the definition of the hash type
and associated hashing functions which will allow the rest of the code to be
agnostic to the specific hash algorithm.
This only implements the package and does not change any of the code
base over to use it.
Putting the test code in the same package makes it easier for forks
since they don't have to change the import paths as much and it also
gets rid of the need for internal_test.go to bridge.
This same thing should probably be done for the majority of the code
base.
This modifies the chaincfg package to register the default network
params via the init function instead of manually hard coding their data
into the maps. This is less error prone when adding new default
networks.
A new function named mustRegister has been introduced that panics if
there are any errors when registering the network that the new code
makes use of and appropriate tests have been added.
First, it removes the documentation section from all the README.md files
and instead puts a web-based godoc badge and link at the top with the
other badges. This is being done since the local godoc tool no longer
ships with Go by default, so the instructions no longer work without
first installing godoc. Due to this, pretty much everyone uses the
web-based godoc these days anyways. Anyone who has manually installed
godoc won't need instructions.
Second, it makes sure the ISC license badge is at the top with the other
badges and removes the textual reference in the overview section.
Finally, it's modifies the Installation section to Installation and
Updating and adds a '-u' to the 'go get' command since it works for both
and thus is simpler.
This commit converts all block height references to int32 instead of
int64. The current target block production rate is 10 mins per block
which means it will take roughly 40,800 years to reach the maximum
height an int32 affords. Even if the target rate were lowered to one
block per minute, it would still take roughly another 4,080 years to
reach the maximum.
In the mean time, there is no reason to use a larger type which results
in higher memory and disk space usage. However, for now, in order to
avoid having to reserialize a bunch of database information, the heights
are still serialized to the database as 8-byte uint64s.
This is being mainly being done in preparation for further upcoming
infrastructure changes which will use the smaller and more efficient
4-byte serialization in the database as well.
Create GenerateCmd in btcjson v2. Update tests to check GenerateCmd.
Update chaincfg/params.go with a new bool in Params, GenerateSupported,
with true values in SimNetParams and RegressionNetParams and false in
the others.
Create new flag, discreteMining, in CPUMiner struct.
Add GenerateNBlocks function to cpuminer.go and handleGenerate
function to rpcserver.go.
Update documentation for the RPC calls.
This commit removes the error returns from the BlockHeader.BlockSha,
MsgBlock.BlockSha, and MsgTx.TxSha functions since they can never fail and
end up causing a lot of unneeded error checking throughout the code base.
It also updates all call sites for the change.
This commit contains the entire btcnet repository along with several
changes needed to move all of the files into the chaincfg directory in
order to prepare it for merging. This does NOT update btcd or any of the
other packages to use the new location as that will be done separately.
- All import paths in the old btcnet test files have been changed to the
new location
- All references to btcnet as the package name have been changed to
chaincfg
- The coveralls badge has been removed since it unfortunately doesn't
support coverage of sub-packages
This is ongoing work toward #214.
