[Application Options] ; ------------------------------------------------------------------------------ ; Data settings ; ------------------------------------------------------------------------------ ; The directory to store data such as the block chain and peer addresses. The ; block chain takes several GB, so this location must have a lot of free space. ; The default is ~/.btcd/data on POSIX OSes, $LOCALAPPDATA/Btcd/data on Windows, ; ~/Library/Application Support/Btcd/data on Mac OS, and $home/btcd/data on ; Plan9. Environment variables are expanded so they may be used. NOTE: Windows ; environment variables are typically %VARIABLE%, but they must be accessed with ; $VARIABLE here. Also, ~ is expanded to $LOCALAPPDATA on Windows. ; datadir=~/.btcd/data ; ------------------------------------------------------------------------------ ; Network settings ; ------------------------------------------------------------------------------ ; Use testnet. ; testnet=1 ; Connect via a SOCKS5 proxy. NOTE: Specifying a proxy will disable listening ; for incoming connections unless listen addresses are provided via the 'listen' ; option. ; proxy=127.0.0.1:9050 ; proxyuser= ; proxypass= ; The SOCKS5 proxy above is assumed to be Tor (https://www.torproject.org). ; If the proxy is not tor the the following my be used to prevent using ; tor specific SOCKS queries to lookup addresses (this increases anonymity when ; tor is used by preventing your IP being leaked via DNS). ; noonion=1 ; Use an alternative proxy to connect to .onion addresses. The proxy is assumed ; to be a Tor node. Non .onion addresses will be contacted with the main proxy ; or without a proxy if none is set. ; onion=127.0.0.1:9051 ; ****************************************************************************** ; Summary of 'addpeer' versus 'connect'. ; ; Only one of the following two options, 'addpeer' and 'connect', may be ; specified. Both allow you to specify peers that you want to stay connected ; with, but the behavior is slightly different. By default, btcd will query DNS ; to find peers to connect to, so unless you have a specific reason such as ; those described below, you probably won't need to modify anything here. ; ; 'addpeer' does not prevent connections to other peers discovered from ; the peers you are connected to and also lets the remote peers know you are ; available so they can notify other peers they can to connect to you. This ; option might be useful if you are having problems finding a node for some ; reason (perhaps due to a firewall). ; ; 'connect', on the other hand, will ONLY connect to the specified peers and ; no others. It also disables listening (unless you explicitly set listen ; addresses via the 'listen' option) and DNS seeding, so you will not be ; advertised as an available peer to the peers you connect to and won't accept ; connections from any other peers. So, the 'connect' option effectively allows ; you to only connect to "trusted" peers. ; ****************************************************************************** ; Add persistent peers to connect to as desired. One peer per line. ; You may specify each IP address with or without a port. The default port will ; be added automatically if one is not specified here. ; addpeer=192.168.1.1 ; addpeer=10.0.0.2:8333 ; addpeer=fe80::1 ; addpeer=[fe80::2]:8333 ; Add persistent peers that you ONLY want to connect to as desired. One peer ; per line. You may specify each IP address with or without a port. The ; default port will be added automatically if one is not specified here. ; NOTE: Specifying this option has other side effects as described above in ; the 'addpeer' versus 'connect' summary section. ; connect=192.168.1.1 ; connect=10.0.0.2:8333 ; connect=fe80::1 ; connect=[fe80::2]:8333 ; Maximum number of inbound and outbound peers. ; maxpeers=8 ; How long to ban misbehaving peers. Valid time units are {s, m, h}. ; Minimum 1s. ; banduration=24h ; banduration=11h30m15s ; Disable DNS seeding for peers. By default, when btcd starts, it will use ; DNS to query for available peers to connect with. ; nodnsseed=1 ; Specify the interfaces to listen on. One listen address per line. ; NOTE: The default port is modified by some options such as 'testnet', so it is ; recommended to not specify a port and allow a proper default to be chosen ; unless you have a specific reason to do otherwise. ; listen= ; all interfaces on default port (this is the default) ; listen=0.0.0.0 ; all ipv4 interfaces on default port ; listen=:: ; all ipv6 interfaces on default port ; listen=:8333 ; all interfaces on port 8333 ; listen=0.0.0.0:8333 ; all ipv4 interfaces on port 8333 ; listen=[::]:8333 ; all ipv6 interfaces on port 8333 ; listen=127.0.0.1:8333 ; only ipv4 localhost on port 8333 ; listen=[::1]:8333 ; only ipv6 localhost on port 8333 ; listen=127.0.0.1:8336 ; only ipv4 localhost on non-standard port 8336 ; listen=:8336 ; all interfaces on non-standard port 8336 ; listen=0.0.0.0:8336 ; all ipv4 interfaces on non-standard port 8336 ; listen=[::]:8336 ; all ipv6 interfaces on non-standard port 8336 ; Disable listening for incoming connections. This will override all listeners. ; nolisten=1 ; ------------------------------------------------------------------------------ ; RPC server options - The following options control the built-in RPC server ; which is used to control and query information from a running btcd process. ; ; NOTE: The RPC server is disabled by default if no rpcuser or rpcpass is ; specified. ; ------------------------------------------------------------------------------ ; Secure the RPC API by specifying the username and password. You must specify ; both or the RPC server will be disabled. ; rpcuser=whatever_username_you_want ; rpcpass= ; Specify the interfaces for the RPC server listen on. One listen address per ; line. NOTE: The default port is modified by some options such as 'testnet', ; so it is recommended to not specify a port and allow a proper default to be ; chosen unless you have a specific reason to do otherwise. ; rpclisten= ; all interfaces on default port (this is the default) ; rpclisten=0.0.0.0 ; all ipv4 interfaces on default port ; rpclisten=:: ; all ipv6 interfaces on default port ; rpclisten=:8334 ; all interfaces on port 8334 ; rpclisten=0.0.0.0:8334 ; all ipv4 interfaces on port 8334 ; rpclisten=[::]:8334 ; all ipv6 interfaces on port 8334 ; rpclisten=127.0.0.1:8334 ; only ipv4 localhost on port 8334 ; rpclisten=[::1]:8334 ; only ipv6 localhost on port 8334 ; rpclisten=127.0.0.1:8337 ; only ipv4 localhost on non-standard port 8337 ; rpclisten=:8337 ; all interfaces on non-standard port 8337 ; rpclisten=0.0.0.0:8337 ; all ipv4 interfaces on non-standard port 8337 ; rpclisten=[::]:8337 ; all ipv6 interfaces on non-standard port 8337 ; Specify the maximum number of concurrent RPC clients for standard connections. ; rpcmaxclients=10 ; Specify the maximum number of concurrent RPC websocket clients. ; rpcmaxwebsockets=25 ; Use the following setting to disable the RPC server even if the rpcuser and ; rpcpass are specified above. This allows one to quickly disable the RPC ; server without having to remove credentials from the config file. ; norpc=1 ; ------------------------------------------------------------------------------ ; Debug ; ------------------------------------------------------------------------------ ; Debug logging level. ; Valid levels are {trace, debug, info, warn, error, critical} ; You may also specify =,=,... to set ; log level for individual subsystems. Use btcd --debuglevel=show to list ; available subsystems. ; debuglevel=info ; The port used to listen for HTTP profile requests. The profile server will ; be disabled if this option is not specified. The profile information can be ; accessed at http://localhost:/debug/pprof once running. ; profile=6061