[Application Options] ; ------------------------------------------------------------------------------ ; Data settings ; ------------------------------------------------------------------------------ ; The directory to store data such as the block chain and peer addresses. The ; block chain takes several GB, so this location must have a lot of free space. ; The default is ~/.lbcd/data on POSIX OSes, $LOCALAPPDATA/Lbcd/data on Windows, ; ~/Library/Application Support/Lbcd/data on Mac OS, and $home/lbcd/data on ; Plan9. Environment variables are expanded so they may be used. NOTE: Windows ; environment variables are typically %VARIABLE%, but they must be accessed with ; $VARIABLE here. Also, ~ is expanded to $LOCALAPPDATA on Windows. ; datadir=~/.lbcd/data ; ------------------------------------------------------------------------------ ; Network settings ; ------------------------------------------------------------------------------ ; Use testnet. ; testnet=1 ; Connect via a SOCKS5 proxy. NOTE: Specifying a proxy will disable listening ; for incoming connections unless listen addresses are provided via the 'listen' ; option. ; proxy=127.0.0.1:9050 ; proxyuser= ; proxypass= ; The SOCKS5 proxy above is assumed to be Tor (https://www.torproject.org). ; If the proxy is not tor the following may be used to prevent using tor ; specific SOCKS queries to lookup addresses (this increases anonymity when tor ; is used by preventing your IP being leaked via DNS). ; noonion=1 ; Use an alternative proxy to connect to .onion addresses. The proxy is assumed ; to be a Tor node. Non .onion addresses will be contacted with the main proxy ; or without a proxy if none is set. ; onion=127.0.0.1:9051 ; onionuser= ; onionpass= ; Enable Tor stream isolation by randomizing proxy user credentials resulting in ; Tor creating a new circuit for each connection. This makes it more difficult ; to correlate connections. ; torisolation=1 ; Do NOT use Universal Plug and Play (UPnP) to automatically open the listen port ; and obtain the external IP address from supported devices. NOTE: This option ; will have no effect if exernal IP addresses are specified. ; noupnp=0 ; Specify the external IP addresses your node is listening on. One address per ; line. lbcd will not contact 3rd-party sites to obtain external ip addresses. ; This means if you are behind NAT, your node will not be able to advertise a ; reachable address unless you specify it here or enable the 'upnp' option (and ; have a supported device). ; externalip=1.2.3.4 ; externalip=2002::1234 ; ****************************************************************************** ; Summary of 'addpeer' versus 'connect'. ; ; Only one of the following two options, 'addpeer' and 'connect', may be ; specified. Both allow you to specify peers that you want to stay connected ; with, but the behavior is slightly different. By default, lbcd will query DNS ; to find peers to connect to, so unless you have a specific reason such as ; those described below, you probably won't need to modify anything here. ; ; 'addpeer' does not prevent connections to other peers discovered from ; the peers you are connected to and also lets the remote peers know you are ; available so they can notify other peers they can to connect to you. This ; option might be useful if you are having problems finding a node for some ; reason (perhaps due to a firewall). ; ; 'connect', on the other hand, will ONLY connect to the specified peers and ; no others. It also disables listening (unless you explicitly set listen ; addresses via the 'listen' option) and DNS seeding, so you will not be ; advertised as an available peer to the peers you connect to and won't accept ; connections from any other peers. So, the 'connect' option effectively allows ; you to only connect to "trusted" peers. ; ****************************************************************************** ; Add persistent peers to connect to as desired. One peer per line. ; You may specify each IP address with or without a port. The default port will ; be added automatically if one is not specified here. ; addpeer=192.168.1.1 ; addpeer=10.0.0.2:9246 ; addpeer=fe80::1 ; addpeer=[fe80::2]:9246 ; Add persistent peers that you ONLY want to connect to as desired. One peer ; per line. You may specify each IP address with or without a port. The ; default port will be added automatically if one is not specified here. ; NOTE: Specifying this option has other side effects as described above in ; the 'addpeer' versus 'connect' summary section. ; connect=192.168.1.1 ; connect=10.0.0.2:9246 ; connect=fe80::1 ; connect=[fe80::2]:9246 ; Maximum number of inbound and outbound peers. ; maxpeers=125 ; Disable banning of misbehaving peers. ; nobanning=1 ; Maximum allowed ban score before disconnecting and banning misbehaving peers. ; banthreshold=100 ; How long to ban misbehaving peers. Valid time units are {s, m, h}. ; Minimum 1s. ; banduration=24h ; banduration=11h30m15s ; Minimum time between attempts to send new inventory to a connected peer. ; trickleinterval=10s ; Add whitelisted IP networks and IPs. Connected peers whose IP matches a ; whitelist will not have their ban score increased. ; whitelist=127.0.0.1 ; whitelist=::1 ; whitelist=192.168.0.0/24 ; whitelist=fd00::/16 ; Disable DNS seeding for peers. By default, when lbcd starts, it will use ; DNS to query for available peers to connect with. ; nodnsseed=1 ; Specify the interfaces to listen on. One listen address per line. ; NOTE: The default port is modified by some options such as 'testnet', so it is ; recommended to not specify a port and allow a proper default to be chosen ; unless you have a specific reason to do otherwise. ; All interfaces on default port (this is the default): ; listen= ; All ipv4 interfaces on default port: ; listen=0.0.0.0 ; All ipv6 interfaces on default port: ; listen=:: ; All interfaces on port 9246: ; listen=:9246 ; All ipv4 interfaces on port 9246: ; listen=0.0.0.0:9246 ; All ipv6 interfaces on port 9246: ; listen=[::]:9246 ; Only ipv4 localhost on port 9246: ; listen=127.0.0.1:9246 ; Only ipv6 localhost on port 9246: ; listen=[::1]:9246 ; Only ipv4 localhost on non-standard port 8336: ; listen=127.0.0.1:8336 ; All interfaces on non-standard port 8336: ; listen=:8336 ; All ipv4 interfaces on non-standard port 8336: ; listen=0.0.0.0:8336 ; All ipv6 interfaces on non-standard port 8336: ; listen=[::]:8336 ; Disable listening for incoming connections. This will override all listeners. ; nolisten=1 ; Disable peer bloom filtering. See BIP0111. ; nopeerbloomfilters=1 ; Add additional checkpoints. Format: ':' ; addcheckpoint=: ; Add comments to the user agent that is advertised to peers. ; Must not include characters '/', ':', '(' and ')'. ; uacomment= ; A comma separated list of user-agent substrings which will cause lbcd to reject ; any peers whose user-agent contains any of the blacklisted substrings. ; agentblacklist= ; A comma separated list of user-agent substrings which will cause lbcd to require ; all peers' user-agents to contain one of the whitelisted substrings. The blacklist ; is applied before the whitelist, and an empty whitelist will allow all agents that ; do not fail the blacklist. ; agentwhitelist= ; Disable committed peer filtering (CF). ; nocfilters=1 ; ------------------------------------------------------------------------------ ; RPC server options - The following options control the built-in RPC server ; which is used to control and query information from a running lbcd process. ; ; NOTE: The RPC server is disabled by default if rpcuser AND rpcpass, or ; rpclimituser AND rpclimitpass, are not specified. ; ------------------------------------------------------------------------------ ; Secure the RPC API by specifying the username and password. You can also ; specify a limited username and password. You must specify at least one ; full set of credentials - limited or admin - or the RPC server will ; be disabled. ; rpcuser=whatever_admin_username_you_want ; rpcpass= ; rpclimituser=whatever_limited_username_you_want ; rpclimitpass= ; Specify the interfaces for the RPC server listen on. One listen address per ; line. NOTE: The default port is modified by some options such as 'testnet', ; so it is recommended to not specify a port and allow a proper default to be ; chosen unless you have a specific reason to do otherwise. By default, the ; RPC server will only listen on localhost for IPv4 and IPv6. ; All interfaces on default port: ; rpclisten= ; All ipv4 interfaces on default port: ; rpclisten=0.0.0.0 ; All ipv6 interfaces on default port: ; rpclisten=:: ; All interfaces on port 9245: ; rpclisten=:9245 ; All ipv4 interfaces on port 9245: ; rpclisten=0.0.0.0:9245 ; All ipv6 interfaces on port 9245: ; rpclisten=[::]:9245 ; Only ipv4 localhost on port 9245: ; rpclisten=127.0.0.1:9245 ; Only ipv6 localhost on port 9245: ; rpclisten=[::1]:9245 ; Only ipv4 localhost on non-standard port 8337: ; rpclisten=127.0.0.1:8337 ; All interfaces on non-standard port 8337: ; rpclisten=:8337 ; All ipv4 interfaces on non-standard port 8337: ; rpclisten=0.0.0.0:8337 ; All ipv6 interfaces on non-standard port 8337: ; rpclisten=[::]:8337 ; Specify the maximum number of concurrent RPC clients for standard connections. ; rpcmaxclients=10 ; Specify the maximum number of concurrent RPC websocket clients. ; rpcmaxwebsockets=25 ; Max number of concurrent RPC requests that may be processed concurrently. ; rpcmaxconcurrentreqs=20 ; Mirror some JSON-RPC quirks of Bitcoin Core -- NOTE: Discouraged unless ; interoperability issues need to be worked around ; rpcquirks=1 ; Use the following setting to disable the RPC server even if the rpcuser and ; rpcpass are specified above. This allows one to quickly disable the RPC ; server without having to remove credentials from the config file. ; norpc=1 ; Use the following setting to disable TLS for the RPC server. NOTE: This ; option only works if the RPC server is bound to localhost interfaces (which is ; the default). ; notls=1 ; File containing the certificate file. ; rpccert=~/.lbcd/rpc.cert ; File containing the certificate key. ; rpckey=~/.lbcd/rpc.key ; ------------------------------------------------------------------------------ ; Mempool Settings - The following options ; ------------------------------------------------------------------------------ ; Set the minimum transaction fee to be considered a non-zero fee, ; minrelaytxfee=0.00001 ; Rate-limit free transactions to the value 15 * 1000 bytes per ; minute. ; limitfreerelay=15 ; Require high priority for relaying free or low-fee transactions. ; norelaypriority=0 ; Limit orphan transaction pool to 100 transactions. ; maxorphantx=100 ; Do not accept transactions from remote peers. ; blocksonly=1 ; Relay non-standard transactions regardless of default network settings. ; relaynonstd=1 ; Reject non-standard transactions regardless of default network settings. ; rejectnonstd=1 ; Reject transactions that attempt to replace existing transactions within ; the mempool through the Replace-By-Fee (RBF) signaling policy. ; rejectreplacement=0 ; ------------------------------------------------------------------------------ ; Optional Indexes ; ------------------------------------------------------------------------------ ; Build and maintain a full hash-based transaction index which makes all ; transactions available via the getrawtransaction RPC. ; txindex=1 ; Build and maintain a full address-based transaction index which makes the ; searchrawtransactions RPC available. ; addrindex=1 ; Delete the entire address index on start up, then exit. ; dropaddrindex=0 ; ------------------------------------------------------------------------------ ; Signature Verification Cache ; ------------------------------------------------------------------------------ ; Limit the signature cache to a max of 50000 entries. ; sigcachemaxsize=50000 ; ------------------------------------------------------------------------------ ; Coin Generation (Mining) Settings - The following options control the ; generation of block templates used by external mining applications through RPC ; calls as well as the built-in CPU miner (if enabled). ; ------------------------------------------------------------------------------ ; Enable built-in CPU mining. ; ; NOTE: This is typically only useful for testing purposes such as testnet or ; simnet since the difficulty on mainnet is far too high for CPU mining to be ; worth your while. ; generate=false ; Add addresses to pay mined blocks to for CPU mining and potentially in the ; block templates generated for the getblocktemplate RPC. One address per line. ; miningaddr=1yourbitcoinaddress ; miningaddr=1yourbitcoinaddress2 ; miningaddr=1yourbitcoinaddress3 ; Specify the minimum block size in bytes to create. By default, only ; transactions which have enough fees or a high enough priority will be included ; in generated block templates. Specifying a minimum block size will instead ; attempt to fill generated block templates up with transactions until it is at ; least the specified number of bytes. ; blockminsize=0 ; Specify the maximum block size in bytes to create. This value will be limited ; to the consensus limit if it is larger than that value. ; blockmaxsize=750000 ; Mininum block weight to be used when creating a block. ; blockminweight=0 ; Maximum block weight to be used when creating a block. ; blockmaxweight=3000000 ; Specify the size in bytes of the high-priority/low-fee area when creating a ; block. Transactions which consist of large amounts, old inputs, and small ; sizes have the highest priority. One consequence of this is that as low-fee ; or free transactions age, they raise in priority thereby making them more ; likely to be included in this section of a new block. This value is limited ; by the blockmaxsize option and will be limited as needed. ; blockprioritysize=50000 ; ------------------------------------------------------------------------------ ; Debug ; ------------------------------------------------------------------------------ ; Directory to log output. ; logdir=~/.lbcd/logs ; Debug logging level. ; Valid levels are {trace, debug, info, warn, error, critical} ; You may also specify =,=,... to set ; log level for individual subsystems. Use lbcd --debuglevel=show to list ; available subsystems. ; debuglevel=info ; Write CPU profile to the specified file. ; cpuprofile= ; The port used to listen for HTTP profile requests. The profile server will ; be disabled if this option is not specified. The profile information can be ; accessed at http://localhost:/debug/pprof once running. ; profile=6061