(1) Due to IAPI/commerce query limit, and also to not pollute the wallet with infinite chargeCodes, we'll only show the last 10 swaps. Beamer mentioned that it's possible to tracked back the past chargeCodes of the user, and potential provide a `list` endpoint to handle disputes.
(2) If a user explicitly removed an entry, don't repopulate that entry even if websocket returned an updated status for it. While it might be useful to handle accidental removals, it looks weird when the list gets repopulated with 'Expired' entries.
(3) Add sanitization when repopulating the chargeCodes from the wallet data (i.e. remove 'null' entries).
(4) Always repopulate the list per wallet data so every instance looks the same.
- For the active swap, switch from polling to websocket. The returned data is now the Charge data from the commerce, so some parsing will be required.
- Allow the user to send other coins that the commerce supports.
- Only save the 'chargeCode' to the wallet. The other data can be repopulated from this.
- Store the receipt currency. I'm not sure if the commerce supports sending bits from various coins. Take the coin that came with the 'COMPLETED' message for now.
- Fix 'lbc' calculation to match IAPI side.
- Allow users to see full detauls from "View Past Swaps".
- String cleanup
- GUI cleanup.
While it would be nice if we can swap anonymously through Desktop, the IAPI will tie a wallet address with an account. Final decision is to require authentication.
- Users should be able to see the entered and promised amount, otherwise they might forget how much to send over.
- This change also prepares for the future upgrade to support multiple coins.
## Issue
- Patch for 5316: "Home and End keys not working in search box"
## Notes
Seems like 'shift+home' wasn't highlighting the text. 'shift+end' works.
Was pretty sure I tested that previously. Anyway, adding the direction variable seems to fix it.
- The icon makes the screen too busy when there are lots of images in a page.
- Use src as the last resort for the text (I though `title` and `alt` was mandatory in markdown; apparently not).
- Re-organize the return statement of 'NotificationsPage' a bit, otherwise the entire page will reload (blink) every time the drop-down value is changed due to the 'fetching' flag.
- Retained the original behavior of (only showing a blank page + spinner) on the very first load. I think there is merit in not showing the buttons immediately (e.g. when not logged in and `/$/notifications` is accessed directly).
Initially, the filtered list was done at the component level, and the list was simply a subset of `notifications`. But due to the limit issue explained in 5694, we now query the filtered list instead.
Considerations:
- The filtered list could contain items not listed in the 'All' list. We could add a string at the bottom of 'All' that says "not all items retrieved" if this confuses the user.
- The unseen count needs to be based on 'All' and not the filtered one, so that data needs to be stashed somehow (can't re-use the array).
Use 2 arrays for now instead of trying to accumulate "all" and "filtered" into 1 array.
## Issue
4945: Simplify / revamp search filters for odysee (and lbry.tv)
## Changes
- Tweaked the "claim type = file | channel | everything" a little to hopefully make it more intuitive.
- Added "Sort By".
- Added "Upload Date".
- Fixed the affected files to handle both Desktop and Odysee.
- Tweaked the layout to be more condensed so that we can see some results as we change the filter.
- Added animations.
- Added "Exact match" option that helps user to surround with quotes.
- This change makes it work for both Desktop and Odysee. When merging back to Odysee, just take the file from `master` (barring any changes from someone else).
- Given that we'll be opening up the search filter for Odysee, the only "simple site" customization that was back-ported is `free_only=true`.
## Issue
- Redo 5636: Disable video previews in comments/posts made by channels below a certain channel staked level
- Closes 5738: expand video preview level requierment to markdown images also
I think using the 'values' for the keys should be fine since each language name is unique. A key-clash would also help us catch mistakes like not differentiating sub-languages if support any (e.g. "English" vs. "English (British)")
Had to cast to String for lint.
- SUPPORTED_SUB_LANGUAGE_CODES[] that I introduced was pretty redundant when SUPPORTED_LANGUAGES[] already hold the information. The logic to ignore sub-languages (i.e. reduce the locale's "en-GB" to "en" is now located in getDefaultLanguage()).
- SUPPORTED_BROWSER_LANGUAGES[] and SUPPORTED_LANGUAGES[] look so similar and hard to tell what the former is for at first glance. The functionality to map 'zh-CN' to 'zh-Hans' is now handled by resolveLanguageAlias(), which makes the intention clearer.
This leaves us with a single list -- SUPPORTED_LANGUAGES[], whose key also tells us the desired language code to use.
Also, clients now need to call `resolveLanguageAlias` to map any language code aliases, as they differ depending on how it is queried (e.g. `navigator.language` vs. `app.getLocal()` uses different standards).
I think we no longer need to explicitly migrate existing user's 'zh-CN' into 'zh-Hans' because the rest of the system will always use the desired language code as long as 'resolveLanguageAlias' is called appropriately. e.g. the system uses `selectLanguage` and `selectLanguage` calls `resolveLanguageAlias`.
## Issue
Closes 5811: Video-embed in markdown-post is broken
- Revert "Fix 'makeSelectIsPlaying' to look at 'playing' instead of 'primary'." dabdc980a1.
- Revert "Fix 'isPlaying' to reflect 'playing' instead of 'primary' URI" 351890decf.
Reverting means "Deleting MD from downloads list causes spinning icon to run forever 4959" gets re-opened, but this is a way less severe issue to leave in.
Closes 5000: AutoPlay in Floating Player only works one time
Factor out the code that queries the recommendation. It needs to be called in two places:
(1) `RecommendedContent` - need to cover the case of floating player + visit another video page.
(2) When video is floating and autoplayed the next video.
## Issue
Closes#5720: Edit: channel-selector should re-populate with original channel
## Notes
'incognito' was not set to false, causing the 'ChannelSelector' to select Anonymous.
- remove anon option in channel dropdown when livestream tab is selected
- attempt to fill publish form with current active channel name just prior to publishing to (edge condition)
- edge condition occurs when user fills out form fully. User switches to Post (which allows anon in drop down selector). User selects Anon channel, then switches back to the livestream tab. The form was previously updated with `channel: undefined` but does not get changed when clicking the livestream tab. So we just updated the form one last time prior to publishing as a livestream
- Show most recent livestream claim on livestream setup page instead of first livestream claim
## Issue
Closes 5721: Publish-Preview updates
## Changes
(1) Match the recent "incognito" change that sets the channel to `undefined` via `updatePublishForm`. This change would also cover `null` -- I don't think it's being used to represent something else, so showing "Anonymous" for `null` should be fine.
(2) Added channel icons, so it'll be more obvious to the user if they accidentally selected the wrong channel.
## Issue
Closes 5687: Ensure post mode has no text limit
## Changes
- `type="markdown"` can now have unlimited length if clients don't define `textAreaMaxWidth`.
- The internal default limit of 2000 is narrowed down to `type=textarea`.
## Issue
Closes 3661: Autoplay + Related go into loops ( infinite ) sometimes
## GUI
Push the actual "next" item into the top of the list.
## History search
1. Skip if the next item is itself.
2. The URL stored in the history comes in various forms, so a direct comparison won't work.
- There's also a weird case where the URL differs by just a little (p.09 vs p-09), but with the same claim ID:
lbry://vacuum-tube-computer-p.09-–-building#5212bc8bc63c373e2bf1ebc5b765595ed7b6514d
lbry://vacuum-tube-computer-p-09-–-building#5212bc8bc63c373e2bf1ebc5b765595ed7b6514d
Check the claim_id as well to cover cases like these.
## Issue
Closes 5537: Allow youtube sync new pass language to api
## Notes
- Default language for the selector comes from browser (`navigator.language`)
## Changes
- Restore original code for how Volume and Mute is restored.
- Playback rate will be only change that gets "re-restored" in "loadedmetadata".
## Issue
5513: Video-setting persistence broken
## Notes
- Per videojs recommendation, the setting-restoration should be done after the video has been loaded, so the action was moved to `loadedmetadata`. This fixed the volume slider problem, and should have fixed the playbackRate too.
- For playbackRate, there is another special case where it gets reset to 1 (refer to comments in code).
## Issue
Closes 4936: Don't process markdown formatting as lbry:// url previews
## Approach
Preamble:
- We want to convert plain `https://lbry.tv/befreeonlbry` to an embed, but not `[blah](https://lbry.tv/befreeonlbry)`.
- At the markdown/remark level, both formats resolve to the same node type, having a `link` and a `text`, with the 'text' being auto-filled with the `href` if there is no label.
Fix by assuming the link is the non-labelled format if the `text` is the same as `href`.
This opens up one corner-case that we can't handle, which is when the user explicitly set the label using the href, e.g. `[https://lbry.tv/befreeonlbry](https://lbry.tv/befreeonlbry)`. This will still resolve to an embed. There's not enough data at the parsed level differentiate this case -- we would need to parse the content ourself before `remark`, which I think is not worth it.
## Aside/Reminder
If you see that the link doesn't resolve to an embed regardless of the format used, that's probably just due to `5636: Disable video previews in comments/posts made by channels below a certain channel staked level`
- Channel About
- description: seems handy to have a preview, so pulled in the "allowed" logic.
- email: shouldn't render preview at all
- website: shouldn't render preview at all
- Publish Preview:
- description: there's not enough height anyway, so don't render preview.
## Issue
Closes 5193: Add filtering on notifications page
## Approach
- Add a combo box, and simply filter out the notifications based on the combo box value.
- Selection state is persistent, but reset to All if there are unread ones when entering the page.
- Tell the user that "no notifications" could be due to the filter.
## Issue
- Closes "Wunder: Keyboard typing confusion" (https://discord.com/channels/362322208485277697/377895389992321064/784309720293965824)
- Closes 5316: "Home and End keys not working in search box"
## New behavior
Home/End key now behaves like it normally would in a typical text box, i.e.:
- Brings you to the start or end position.
- Adding a <Shift> key also selects the text from the current position.
To select the top or bottom item in the Suggestion Popup List, use Ctrl+Home/End instead (without this change, it was just Home/End previously).
## Approach
Adding the listener at the element level allows us to run it before the component's listener.
## Issue
Partially closes 3041: Display/hint what keyboard shortcuts are available in videos
(minus the "all shortcuts" overlay -- saving that for another day)
Closes 5597: batch resolves on channel search page
Do a batch-resolve immediate after getting the results and before setting the result variable, as the latter would result in the Claim* components resolving individually.
I enabled `returnCachedClaims` -- I assumed that's a reasonable thing to do. I don't see other places use it, though, so highlighting it here.
## Issue
5554: Video: loading circle sometimes does not appear until 2nd click
## What's happening
videojs behavior:
(a) A `src` change makes the Play button re-appear.
(b) An `onPlay` (or `play()`) makes the button go away.
Due to the `m3u8` header async fetch (i.e. return is potentially delayed), the initial `onPlay` (which cleared the button) that happened after user clicked Play gets negated by a potentially-delayed `src` change.
# Changes
- Manually hide the play button that is induced by the change in `src`. In the fetch-delay scenario mentioned above, the player continues to be in a 'playing' state anyway.
- But don't hide the button if paused externally (e.g. browser-level)
Restore video loading circle
## Issue
- Second attempt at 5500: Allow right click + report feature on tiles
- Related: PR_5531
## Notes
Although the link can already be easily copied on web, the menu item is still retained for consistency between the platforms.
## Issue:
Closes 5515: All videos marked as read when clicking a single notification from notification list
## Change:
- Augment `doReadNotifications` to only clear the given IDs. If the argument is `null` or is not a valid array (e.g. when used as a click handlers, the click event object is passed in), all notifications will be cleared.
- Augment `NOTIFICATION_READ_COMPLETED` to only clear the given IDs.
## Notes:
- Wasn't sure of the API will fail if the ID is invalid, so I start from `unreadNotifications` first, then only filtering it further with the given ID. Otherwise, we could just skip the `unreadNotifications` filtering.
https://discord.com/channels/362322208485277697/363087331475062785/815132676293918730
- Renamed `closeInlinePlayer` to `clearPlayingUri` to reflect it's actual function.
- Add additional check to see if the current video is actually inline before closing it.
Wanted to refactor out an actual `closeInlinePlayer`, but let's wait until there are more usages.
Looking at a few other files hoping to understand the convention for components, I moved the videojs.scss file to where all CSS related files appear to be in the project.
Also restores the CSS for vjs-overlay which I commented out previously for *some* reason (but I don't know why, and it doesn't seem to make a difference whether I comment it out or not)
if blockedList takes a while to return, the app would call claim_search once without the blocked list, then again with the block list. just hide them in the ui
* initial support for block/mute
* hide blocked + muted content everywhere
* add info message for blocked/muted characteristics
* sort blocked list by most recent block first
* add 'blocked' message on channel page for channels that you have blocked
* cleanup
* delete unused files
* always pass mute/block list to claim_search on homepage
* PR cleanup
## Issue
Second attempt at 5571: Limit description length on channel edit
## Changes
- Undo #5573: restore limit back to 5000.
- Translate the `bad-txns-claimscriptsize-toolarge (code 16)` error into `Transaction limit reached. Try reducing the Description length.`
## Issue
Closes 4505: Highlight url instead of text when embedding a link
_Too used to Github's editor behavior, so was annoyed at this too. It makes more sense to highlight the URL placeholder since that needs to be filled._
For to the unhighlighted case, then the cursor should be at the Label.
## Changes
Until the upstream code decides to fix it (`github::Ionaru/easy-markdown-editor/issues/85`), we'll handle it ourself by listing to the 'changes' events.
## Issue
- Most titles don't fit the embed container width. I wish to know what the title is without having to click on it first.
- Also, add clarity that the LBRY icon brings you Home.
## Issue
The removal of `svg` from `media__subtitle` in 09b689ba made the icon black.
## Fix
Both 'Open File' and 'Download' should have the same css class.
## Issue
5219: Add content type and language filters to channel page
## Notes
There is a quirk in the dropdown (see 5542: Language filter doesn't reflect effective setting if language is outside of `SEARCHABLE_LANGUAGES[ ]`)
Included the memes as well per translator request. I've been excluding it since I wasn't sure if memes can be translated, but I guess they can change it to something equivalent in their language.
'Copy' is always disabled for the case of Claim previews since no text is selected. User cannot select text anyway since a left-up event would invoke the Claim's `click` event. 'Copy' is there simply because of re-using `openContextMenu`.
Adds custom video.js hls quality selector plugin
This allows the quality selector plugin to stay active and listen for source changes on the player to prevent the need to recreate the player when switching between MP4's and M3U8's
## Issues
5349: Remove theater mode button from player in comments
5519: Theatre mode button doesn't do anything in full screen mode [Odysse/LBRY desktop app]
## Notes
5349: Wanted to hide for 'markdown' as well, but it seems useful for 'markdown' (to clear the screen from Related), so I did not include it.
## Issue
Closes 5523: timestamps not interpreted in some cases
## Notes
`remark-breaks` previously kept repeating the same index in the loop, causing some corner-cases to be parsed oddly. I added code to address that.
Later, `remark-breaks` fixed the problem and we recently just bumped up the componnent version. My hack is no longer necesary.
## Issue
2731: Searches with forward slashes returns no results
## Change
The slash-removal came from (0db20834f9).
Removing the 2 `replace(/\//, ' ')` from lbry-desktop fixes it, but this PR assumes the slash-removal is intentional to cover something else. So, we'll make the Search side do the same thing to match what's happening in `doSearch`.
A little bit ugly, but there's already a comment about this in `makeSelectSearchUris`, so it'll probably get cleaned up in the future.
## Issue
Closes#5392 better support for non-standard resolution videos
It's not actually cropped -- the control bar was opaque.
## Change
Use 0.80 opacity to somewhat see the full picture.
Using 0.5 or less would be even better, but due to the default tiny size of the control bar, the text becomes unreadable (it's readable if you zoom the browser to get larger text). Don't want to mess with sizing for now, so using 0.80 to get the best of both worlds.
## Issue
5438: Keep floating player in view area
## Changes
- Restore correct z-index
- The bug came as a side effect of cbac2174. Redo cbac2174 to cover both close button and floating player.
- Remove wobbling when dragging to bottom-right.
- The extra gap introduced is fighting against react-draggable. If gaps are needed, handle it entire ourselves or do it somewhere in react-draggable; neither is worth the effort, so the gap was removed.
- Fix i18n concat problem for some languages.
- Display the same label (specifically, the recommended aspect ratio) for both URL and UPLOAD. I think the string "File to upload" can be omitted, but I left it as-is.
- Remove old/unused strings.
Continually recreating video.js instance on render is bad.
Instead, persist a single instance, and simply update the source and poster on the existing instance.
I'm a bit wary of adding props to this component due to the 'dispose' call, but I think 'source' and 'claim' will update together, so it shouldn't be an issue?
## Issue
5308: Ability to choose default play speed and theatre mode or regular playback size
## Comments
Initially, I used the local storage, as per 'muted' and 'volume' -- I thought that would be appropriate.
Later, I saw that Theater Mode is already using Client Settings, so I re-did everything to match that.
Also, there is an accompanying commit in lbyr-redux.
## Issue
5221: floating player won't close during autoplay countdown
## Change
Change the z-index when hover to ensure it is really on top of everything.
## Issue:
5119 "Video: Mobile UI + overlay for keyboard shortcut feedback" was disabled because the feature broke the chromecast button in Android Chrome
## Issue
5204: Don't autoplay when commenting/video off screen
## Change
Previously, the checking was only done during a scroll event. We also need to check if the user has already scroll down before the component was invoked.
