## Issue
4797: Markdown preview breaks when using a lbry link in angle brackets
This is similar to the Embed case in commit dbcd677e.
## Change
Replaced it with a dummy link that looks like what the final outcome would be, but would not be clickable.
Again, similar to the embed case, unless there is a way to pass the store over, I don't have an alternative that makes sense: Adding a dummy router or replacing it as a regular <a> will just make React spew security errors.
Not being able to click it is not ideal as we (as a user) can't verify our links, but it's better than the current case of not rendering anything at all.
remove previous changes,keep syncpref in wallet, change anon wallet pref key to local
sync choices wip
dont relocate syncenable setting
bump
no prefs on web unauth
bugfix redux bump
pull after sync change
bump
## Issue
4644: Markdown Preview breaks when <iframe> is present
Error: "Invariant violation: could not find 'store' ..."
## Change
Until we figure out a way to pass the store to the SimpleMDE preview formatter, just replace the embed with a stub region.
## Issue
The previous code only handled the clamping if the FP is already floating when the main window is resized.
1. In fresh Odysee session, the floating player is always clipped on the right.
2. If you resize the desktop while not floating, the FP could be clipped when you go into floating mode.
## Changes
- Factor out the clamping code.
- Add another effect to handle 'isFloating' changes.
## Issue
4741: `Pop out player disappears or is cut off`
## Approach:
- When dragging stops, determine the location of the floating player with respect to the main window in terms of percentage.
- When window is resized, roughly re-position based on the stored percentage.
## Issue
4669: `Download doesn't trigger on web until 2nd attempt`
The issue only happens when _Autoplay_ is disabled in the User Settings and the video hasn't been loaded when _Download_ is clicked.
The following code:
`if (didClickDownloadButton && streamingUrl)`
didn't triggered because:
1. `streamingUrl` has not resolved yet when the Effect ran.
2. When it did resolve, the parent component was also notified and unmounted things, causing `didClickDownloadButton` to reset.
## Approach
Avoid the unnecessary unmounting by not using a conditional section wrapper within a return statement. React probably couldn't do the diffs when the conditional is at a section level.
## Issue
4708: Bring back tag list in side bar when Tags view selected
## Approach
- Instead of displaying either Channels or Tags, both will now be displayed.
- The tags will simply be a the same button component as the "channels", but with a "#" prefix. This simplifies the CSS-side changes, and looks better overall as well.
## Issue
Fixes 4709 `Dragging floating player via video section pauses video`
## Changes
Don't propagate the key-up action if the window was dragged. Hopefully there isn't another sub-component that relies on the action being propagated.
## Note
If you drag at exactly the "Play" icon the control bar, the issue still happens.
## Issue
Users are annoyed with the constant reset of the 'channel' setting in the Publish page.
## Changes
1. Revert the previous attempt in ff7b4092. The `usePersistedState` method is bad, as it will clash with the Redux value.
2. Implemented the persistence in Redux -- requires "https://github.com/lbryio/lbry-redux/pull/347".
## Issue
The sidebar text stuck in English despite already translated.
I'm guessing the i18n macro only ran once for the global object.
## Change
Run the macro on the label when passing it to the `Button`.
## Issue
The previous commit was over-doing the manual syncing, causing other usages like the Repost Modal to always reset to a different channel.
## Fix
Only do the manual syncing when the channel does not exist.
At this point, we could also just take `channel[0]` as the new value.
## Issue
Fixes `4544 Channel-creation in "Tip|Support" Modal shouldn't submit LBC immediately`
## Changes
`Form` seems to have already tried to stop the propagation of `onSubmit`, so I'm not sure why it was still propagated.
Fix by using the same method used in the `CommentCreate`, which is simply to check for `CHANNEL_NEW` as the current selection.
## Issue
Fixes `4621 Can't create Comments if you recently deleted a channel`
The `channel` that the parent passes in is from a persisted state. If the channel has been deleted, `<select>` will automatically resolve to another selectable value. However, `onChange` will not be called for this scenario, so we now have a mismatch.
## Changes
- Manually check if the value has been auto-resolved and report it to the parent.
- An extra `setTimeout` was needed. It seems like `onChannelChange` needs to be called after the first `useEffect` of the parent, otherwise the call has no effect.
## Issue
In the `Autoplay` case, if the `WaitUntilOnPage` has already opened the gates previously, the next video's Related will be loaded regardless of scroll position.
## Changes
Add a `lastUpdateDate` prop to `WaitUntilOnPage` to allow the parent to reset the gating state.
I don't really like the `lastUpdateDate` prop since it's purpose is not intuitive. Is there a standard way to do a "one-time trigger" from the parent?
This allows `RecommendedContent` to render the Card but with an empty list, so that the area isn't totally blank while waiting for `WaitUntilOnPage` to debounce.
There are cases where `WaitUntilOnPage` will incorrectly render, such as at the beginning if the upper components hasn't expanded to full size, so `WaitUntilOnPage` would be briefly visible.
Added a 300ms debounce to fix this, which would also improve scrolling performance a bit by doing less. Hopefully 300ms is enough for the upper components to inflate to full size.
## Issue:
Fixes 4549 `Mature content + navigating to URLs directly`
_If a user navigates to mature content directly, we currently show the page even if mature content setting is not enabled. With our recent mature content verification setting, we should hide the page until the user turns it on - we can prompt directly on the file page._
## Changes:
1. Show basic info of the claim like URL and Title, so that user knows which page is being blocked.
2. Initially, I had 2 "boxes" -- one for the title and another for the message. It felt a bit messy, so `FileTitle` was augmented to house everything in one box.
## Issue:
Fixes 4411 `"SelectChannel=New" doesn't show all fields on re-entry`
## Code Changes:
`selectChannel`: Correct the value of `addingChannel` in the constructor based on the given props.
(1) This reverts commit 8641a3ee1c.
(2) Fix floating-player misalignment due to YT badge in mobile by hiding the badge.
At first, the suggestion to truncate the left URI to keep the entire thing single-lined was implemented, but during testing, I realized that the YT badge will take up the entire width anyway (especially on other languages). The URI is more important than the badge, and truncating both of them would be ugly.
Given the preference to not have 2 lines for this, we'll just hide the badge for the mobile case.
For the Channel Page case, let's make it single-line through "4454: URL / top claims overlap" instead. We'll keep this commit/PR limited to fixing the YT badge.
## Issue
Fixes 4524 `[mobile] in channel search not available`
## Changes
There are currently 3 wunderbars: (1) header (2) channel list (3) downloaded list.
The additional `wrapperStyle` in the header made it hard to find a solution that works for all 3, so I split 2 and 3 into `wunderbar__input--inline`.
## Issue:
Currently, the checkbox grayed-out state is only correctly updated when changing from "no-file" to "file selected". If you have selected a video file and later changed to a text file, the checkbox doesn't gray out.
## Code Changes:
`fileVid` wasn't being updated for the case of non-videos; now it does.
## Issue
Closes 3964 `Add Youtuber info to file page`
## Changes
(1) Refactor the YT-info query into `YoutubeBadge` component.
(2) For the File Page case, don't show "- last sync <date>" since the date has nothing to do with the file.
## Test
[x] YT Channel page
[x] YT Channel's claim page
[x] Non YT Channel page
[x] Non YT Channel's claim page
[x] No channel (anonymous) claim page
[x] Various RENDER_MODES
## Issue
Closes 4501 `Font size`
## New behavior
The Desktop app can now zoom the same way as browsers:
- Zoom In: "Ctrl+=" or "Ctrl+numpadPlus" or "Ctrl+WheelUp"
- Zoom Out: "Ctrl+-" or "Ctrl+numpadMinus" or "Ctrl+WheelDown"
- Zoom Reset: "Ctrl+0" or "Ctrl+numpad0"
## Code changes
(1) Electron provides this functionality through the `zoomIn|zoomOut|resetZoom` roles in the Menu, so it would have been a quick job.
However, given that Electron currently does not support having multiple accelerators for one item, we can't add `Ctrl+WheelUp` to the mix and would have to implement our own handler and use `webFrame`.
Given that we need to add code anyways, we handle both keyboard and mouse cases through the same handler, hence the existence of `zoomWindow.js`. It also provides the opportunity to few a few quirks with Electron's default implementation (e.g. stuck at both extremes)
(2) I recall there is another Issue for adding keyboard shortcuts. Given that these shortcuts are universally used in browsers, they are probably "reserved", so shouldn't clash with that task.
## Issue
Fixes 2675 `Claim search with exactly 20 results keep fetching next page`
## Changes
Use `claimSearchResultLastPageReached` (I didn't know it existed back then).
The unnecessary "loading" refresh will still happen one time, but at least now it doesn't happen every time we scroll to the bottom (and incorrectly incrementing 'page').
This is a follow-up on PR-4392.
## Issue:
The previous PR covered "pop from within the same page but with different query/order", but missed "pop after entering a claim".
1. Click `Your Tags`.
2. Set order to `New`.
3. Restart app or reload (crucial step)
4. Click `Your Tags`.
5. Click any claim.
6. `Back`. The order incorrectly resets to `Trending` -- it should stay at `New`.
The `UserPasswordReset` can be accessed in two places:
(1) While signing in
(2) From the Settings Page when changing password.
This commit:
- maintains the existing `Cancel|X` behavior for case-1, which is to remain in the Sign-in page.
- For case-2 and any future direct-entry, we'll simply call `goBack()`.
## Issue
Fixes 4293 `Better download link support`
- [x] make it so you can right click a download button > copy download URL
Given that this could be useful in mobile/web as well, I used a button+modal instead of the right-click approach.
- [ ] in share dialog, show download URL to copy for non-video content
This is already implemented, albeit hidden in the "More..." expansion.
## Issue
Fixes 4460 `unmuted state lost / reverted`
1. Play a video.
2. Press mute.
3. Drag the volume bar to unmute.
4. Play a new video --> the video starts muted.
## Fix
The `volumechange` handler was comparing against stale variables, so there are times where the state was not saved. Just save both `muted` and `volume` without additional gating (the gating is probably unnecessary in the first place, since we are in a onChange function).
- Missed the "Account Password" card that is used for authenticated case.
- For cards that are only used in Settings, listen to the language change in "select" instead of passing in as a prop. I think this is cleaner.
## Issue
4332: Video transcode setting not reflected correctly (MP3 incorrectly transcoded to MP4)
2 issues here:
(1) The checkbox is mixing between user state and logic state.
(2) The variables (e.g. `optimize`, `isVid`, `filePath`, etc) will have values from the previous operation when you enter Publish Page, so GUI issues beyond Transcode can be also produced (e.g. showing Transcode enabled for an image).
## Changes
The "Transcode" checkbox state (checked vs. unchecked) will now reflect the user's desire and will be a persisted state. Whether or not this setting is used will be reflected by the checkbox's grayed-out state (i.e. it can be checked for non videos, but it will be grayed out).
## Fixes:
4351: "Infinite load won't work if the same sort option clicked"
Test case:
1. Click Following
2. Click New
3. Scroll down to load at least 1 extra page.
4. Go up and click New again.
## The Issue:
`scrollBottomCbMap[page]` in this case did not reset since the `id` remained the same.
## The Fix:
I don't know how else to notify the effect to run. Perhaps "when `page=1`" is one criteria, but I found that removing `scrollBottomCbMap` can also fix it.
I don't know what scenario that `scrollBottomCbMap` was originally meant to handle, so will need to depend of reviewer to confirm I did not break something else. This fix assumes that recent inf-scroll fixes and debouncing would have addressed the "weird stuff happening with fast scrolling" problem mentioned in the comments.
The previous code was simply delaying the handler, which served the intention of the time, which is to avoid using the wrong coordinate from querying too early. However, we ended up servicing each scroll message.
This is the proper fix, and should technically make scrolling smoother. Maybe this will fix 3576 as well, although I don't see much difference.
## Fixes:
3071: "Infinite scroll stops working when navigating to file page / back"
## The Issue:
In the POP operation, the `page` value is back to 1 due to the initializer `useState(1)`. If the results cache already contained more than 1 page's worth, then the rest of the logic thinks there's nothing to do.
## The Fix:
Previous fixes to Inf-Scroll added a "page correction" code to handle the mismatch. This fix simply adds this scenario to the list of scenarios to perform the correction.
## Fixes:
3641 Language switch does not take effect right away
## Assessment:
Although `Card`s in the Settings Page are actually being re-rendered, the `actions` within them might not be getting the signal, depending on their props.
## Changes:
(1) Pass the language variable to the `actions`'s props for items that are affected.
(2) Make the Wunderbar listen to language-changes as well (the only component outside of Settings that would need an immediate update).
1. Use a constant for the classname instead of being hardcoded.
2. Use existing 'debounce' function instead of introducing another.
3. Added changelog entry.
Fixes #-4021.
## Changes:
When the autoplay overlay gets partially off-screen, the timer will be stopped. We can tweak how much down it needs to be scrolled.
When timer is paused, the countdown resets.
The pausing mechanism has no effect on the floating player (since the 'top' can never go negative). This behavior is the same as another big video platform.
---Fixes:
#-2882: "Fix UX around publishing to already published URL".
---Changes:
1. Improved the error message (change color to red; emphasized the URL; tweaked the sentences a bit).
2. The `Publish` button will be grayed out in this scenario, until user explicitly decides to edit existing claim instead.
--- Issues:
(1) #-2669: Page does not restore to top when navigating new tags.
(2) "Encountered children with the same key" error (duplicate entries shown).
https://github.com/lbryio/lbry-desktop/issues/4367#issuecomment-645449206
--- Changes:
(1) Ignore the history if it's a new query (i.e. explicitly clicked). The BACK history will still behave as normal (doesn't reset to top).
(2) Previously, the `page` variable will continue to increment as you scroll and stay within the page (e.g. Trending vs New, or clicked another Tag). As you move between queries, we hit a scenario where `page` is significantly under or over the latest retrieved `claimSearchResult.length`. This messes up the rest of the code.
Fix by correcting the value of `page` according to the current `claimSearchResult.length` when necessary.
--- Issues:
(1) #-4394 add persistence to new support modal.
(2) Should collapse the custom field when presets are selected.
Even though the Send button repeats the amount for Tip, it's still confusing to see both the Preset being active and Custom numeric field visible.
(3) Missing localization tags.
Implementation:
- The code is placed in <VideoJs> instead of <VideoViewer> as we need to control the video itself. It's more self-contained here, rather than trying to pass refs around between parent and child.
- useState cannot be used as it will cause a re-render when the hint it clicked and dismissed. The DOM is used to hide the button.
--- The bad scenario:
A less popular tag like 'kanji' yields only 23 results today. The code continues to increase the page count. We'll either see some blank page glitches at the bottom, or repeated entries being shown.
--- The fix:
Assume that an unfilled page means "no more results" and stop incrementing the page. This seems true based on empirical evidence.
If you are at the bottom and you hit the UP_ARROW key one time, the logic still thinks we are at the bottom, despite the component has clearly moved. Similar to the issue noted in the previous commit, this causes the page to increment incorrectly.
My wild guess is that the previous logic depends on the css height, so it might got broken due to css changes. Hopefully the new calculation is more robust and works for all cases.
---The bad scenario:
If you're at the bottom and you go up using UP_ARROW or HOME key, the coordinate is still at the bottom if we service the callback immediately. This causes 'contentWrapperAtBottomOfPage' to be true and we ended up incrementing the page unnecessarily (even for searches that no longer yield any extra results).
---Fix:
Fix by adding a delay. The value can probably be fine-tuned further.
---The issue:
When switching between tags, the selector defaults back to Trending even though you had another option already selected.
---Changes:
- 'orderParamUser' will store the last user state persistently. The persistent state is also made unique for each page (i.e. Your Tags and All Content will be unique).
- If the parent component passes in a specific order, that will be respected and will also become the new persisted value. One example is "Your Following", where it always starts at 'New'.
- Handled navigation history correctly
The test case:
- Enter "Your Tags" (assume start at 'Trending')
- Click 'New'
- Click 'Top'
- Back
- Back (it should return to 'Trending')
As the top page history does not have any "?order=" value, we ended up with a no-op for the last Back. 'orderParamEntry' is added to handle this.
Removed space to sync the text "LBRY takes privacy and choice seriously. Just a few questions before you enter the land of content freedom." with that from app-strings.jsx
Implementation:
- <StatusBar> listens to 'update-target-url' and will show/hide itself as needed.
- Handled the display of "lbry://" protocol.
CSS:
- The colors chosen should work on both Light and Dark Theme.
- The delay is necessary to avoid blinkies when the mouse is moving around.
#4259
-- "/wallet" --
I believe this is a link and comes from redux, and shouldn't be translated.
-- "%message%" --
No point sending a variable-only to the translators -- the intended replacements are translated correctly.
-- "%name%" --
Unused.
-- "Something something something..." ---
Unused.
-- Obsolete strings (replaced by better string) --
"You are not able to see those stats right now. Make sure you are signed in with the correct email and have data sharing turned on."
"You are not able to see this channel's stats right now. Make sure you are signed in with the correct email and have data sharing turned on."
"There are no stats for this channel. Make sure you are signed in with the correct email and have data sharing turned on."
The only issue I have with this as a translator is that I have no idea what this sentence is about, as both chunks are variables. This fix is more for clarity.
#4239
Concatenating strings directly assumes that all languages have the same structure as English, which it is not. This fix allows translators to move the tokens around per their language/grammar requirements.
#4239
language and API consts
improve customization
custom homepages
get config from .env.default
custom title and logo
small changes
add pinned item to sidebar
rebase?
Technically, the other modes can have a quick-action button as well, but for now it's not implemented since it's unlikely to be used.
The first usage will be to house the "toggle markdown editor" button, but it can be used for anything. The caller will handle the action.
It will be located at the upper-right, which is a better place for such a button. Putting the "toggle markdown editor" button on the bottom seems too far away and seems to make the 'Done|Cancel' area too busy/cluttered.
--- Problem (#4173) ---
Messages under <i18nMessage> weren't localized although the translation is available. However, the tokens for these messages are localized, causing a mixed-language final string.
--- Fix ---
It appears that the original message (instead of the localized) was used in the token-substitution process.
The best candidate is `aria-label`, followed by `description`.
Most of the existing elements already have these defined, so try to route it as the tooltip instead of having to explicitly define tooltips everywhere through a redundant `title` or <Tooltip> tag.
Minor side-effect:
This will cancel off any effect from a parent <Tooltip>, i.e. might confuse future developers who are trying to do "<Tooltip><Button></Button></Tooltip>".
The class was only returning a localized string for 'years' and 'months'; English was used for the rest.
- Fixed by handling the remaining cases.
- New strings were added (1) so that they will all be consistent language-wise until the translators handle them all (2) allows for cleaner code through variable re-use (%duration%).
Changed "Your video may not be the best format. Use MP4s in H264/AAC format and a friendly bitrate (720p) for more reliable streaming." to "Your video may not be the best format. Use MP4s in H264/AAC format and a friendly bitrate (under 5 mbps) and resolution (720p) for more reliable streaming." and changed the two times it says this "For video content, use MP4s in H264/AAC format and a friendly bitrate (720p) for more reliable streaming." to "For video content, use MP4s in H264/AAC format and a friendly bitrate (under 5 mbps) and resolution (720p) for more reliable streaming."
i18n messages, handle error case max
copy copy
update @lbry/components and tweak range styles
sigfigs
error catching and cleanup
apply review changes
style table and unlock button
handle tip errors
separate fileDescription from fileDetails
make expandable cards
ui tweaks
tweak copy, style, behavior
remove unused strings
forgot an important line
* am I done?
* post diff
* unused selector cleanup
* missed commit
* mess with button styles
* fix flow
Co-authored-by: Jeremy Kauffman <jeremy@lbry.io>
Co-authored-by: Sean Yesmunt <sean@lbry.io>
appstrings
provide optimize checkbox on publish
fix missing status
no crash on web
cleanup
better settings ui
add help and time estimate to publish transcoding
messaging
fix: Special SDK + fix config name
fix: older SDK build
fix app string, style tweak
whoops, and looks better to me this way.
bump SDK
users see welcome screen once and choose preference
SETTINGS moved to redux
took steps toward eliminating unwanted analytics in app based on preferences
settings page update to privacy controls and copy
persist welcome version
default tv on
cleanup
clean up appstrings
populate prefs app only
wallet custody, app only router
settings on startup
welcome sync, 3p share sync, emojis
bump redux
cleanup
fix app not building
fix sync bug, remove tvWelcomeVersion
cleanup
disable internalshare setting while signed in
