From baa510b2105ad2249c9d87c5fbe0e65e8de3c98e Mon Sep 17 00:00:00 2001 From: Philip Kaufmann Date: Fri, 16 Nov 2012 14:52:36 +0100 Subject: [PATCH] update bitcoinstrings.cpp and bitcoin_en.ts --- src/qt/bitcoinstrings.cpp | 38 +++- src/qt/locale/bitcoin_en.ts | 424 ++++++++++++++++++++---------------- 2 files changed, 260 insertions(+), 202 deletions(-) diff --git a/src/qt/bitcoinstrings.cpp b/src/qt/bitcoinstrings.cpp index 7e8e102ee..497c05976 100644 --- a/src/qt/bitcoinstrings.cpp +++ b/src/qt/bitcoinstrings.cpp @@ -13,26 +13,33 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "rpcuser=bitcoinrpc\n" "rpcpassword=%s\n" "(you do not need to remember this password)\n" +"The username and password MUST NOT be the same.\n" "If the file does not exist, create it with owner-readable-only file " "permissions.\n"), QT_TRANSLATE_NOOP("bitcoin-core", "" "Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:" "@STRENGTH)"), QT_TRANSLATE_NOOP("bitcoin-core", "" +"An error occurred while setting up the RPC port %u for listening on IPv4: %s"), +QT_TRANSLATE_NOOP("bitcoin-core", "" "An error occurred while setting up the RPC port %u for listening on IPv6, " "falling back to IPv4: %s"), QT_TRANSLATE_NOOP("bitcoin-core", "" -"An error occurred while setting up the RPC port %u for listening on IPv4: %s"), +"Bind to given address and always listen on it. Use [host]:port notation for " +"IPv6"), QT_TRANSLATE_NOOP("bitcoin-core", "" -"Cannot obtain a lock on data directory %s. Bitcoin is probably already " +"Cannot obtain a lock on data directory %s. Bitcoin is probably already " "running."), QT_TRANSLATE_NOOP("bitcoin-core", "" -"Error: The transaction was rejected. This might happen if some of the coins " +"Error initializing database environment %s! To recover, BACKUP THAT " +"DIRECTORY, then remove everything from it except for wallet.dat."), +QT_TRANSLATE_NOOP("bitcoin-core", "" +"Error: The transaction was rejected! This might happen if some of the coins " "in your wallet were already spent, such as if you used a copy of wallet.dat " "and coins were spent in the copy but not marked as spent here."), QT_TRANSLATE_NOOP("bitcoin-core", "" "Error: This transaction requires a transaction fee of at least %s because of " -"its amount, complexity, or use of recently received funds "), +"its amount, complexity, or use of recently received funds!"), QT_TRANSLATE_NOOP("bitcoin-core", "" "Execute command when the best block changes (%s in cmd is replaced by block " "hash)"), @@ -45,6 +52,9 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "Set maximum size of high-priority/low-fee transactions in bytes (default: " "27000)"), QT_TRANSLATE_NOOP("bitcoin-core", "" +"This is a pre-release test build - use at your own risk - do not use for " +"mining or merchant applications"), +QT_TRANSLATE_NOOP("bitcoin-core", "" "Unable to bind to %s on this computer. Bitcoin is probably already running."), QT_TRANSLATE_NOOP("bitcoin-core", "" "Warning: -paytxfee is set very high! This is the transaction fee you will " @@ -56,6 +66,13 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "Warning: Please check that your computer's date and time are correct! If " "your clock is wrong Bitcoin will not work properly."), QT_TRANSLATE_NOOP("bitcoin-core", "" +"Warning: error reading wallet.dat! All keys read correctly, but transaction " +"data or address book entries might be missing or incorrect."), +QT_TRANSLATE_NOOP("bitcoin-core", "" +"Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as " +"wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect " +"you should restore from a backup."), +QT_TRANSLATE_NOOP("bitcoin-core", "" "You must set rpcpassword= in the configuration file:\n" "%s\n" "If the file does not exist, create it with owner-readable-only file " @@ -65,7 +82,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Accept connections from outside (default: 1 i QT_TRANSLATE_NOOP("bitcoin-core", "Add a node to connect to and attempt to keep the connection open"), QT_TRANSLATE_NOOP("bitcoin-core", "Allow DNS lookups for -addnode, -seednode and -connect"), QT_TRANSLATE_NOOP("bitcoin-core", "Allow JSON-RPC connections from specified IP address"), -QT_TRANSLATE_NOOP("bitcoin-core", "Bind to given address. Use [host]:port notation for IPv6"), +QT_TRANSLATE_NOOP("bitcoin-core", "Attempt to recover private keys from a corrupt wallet.dat"), QT_TRANSLATE_NOOP("bitcoin-core", "Bitcoin version"), QT_TRANSLATE_NOOP("bitcoin-core", "Bitcoin"), QT_TRANSLATE_NOOP("bitcoin-core", "Block creation options:"), @@ -85,8 +102,8 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Error loading wallet.dat"), QT_TRANSLATE_NOOP("bitcoin-core", "Error loading wallet.dat: Wallet corrupted"), QT_TRANSLATE_NOOP("bitcoin-core", "Error loading wallet.dat: Wallet requires newer version of Bitcoin"), QT_TRANSLATE_NOOP("bitcoin-core", "Error"), -QT_TRANSLATE_NOOP("bitcoin-core", "Error: Transaction creation failed "), -QT_TRANSLATE_NOOP("bitcoin-core", "Error: Wallet locked, unable to create transaction "), +QT_TRANSLATE_NOOP("bitcoin-core", "Error: Transaction creation failed!"), +QT_TRANSLATE_NOOP("bitcoin-core", "Error: Wallet locked, unable to create transaction!"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: could not start node"), QT_TRANSLATE_NOOP("bitcoin-core", "Failed to listen on any port. Use -listen=0 if you want this."), QT_TRANSLATE_NOOP("bitcoin-core", "Fee per KB to add to transactions you send"), @@ -96,8 +113,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Generate coins"), QT_TRANSLATE_NOOP("bitcoin-core", "Get help for a command"), QT_TRANSLATE_NOOP("bitcoin-core", "How many blocks to check at startup (default: 2500, 0 = all)"), QT_TRANSLATE_NOOP("bitcoin-core", "How thorough the block verification is (0-6, default: 1)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Importing blockchain data file."), -QT_TRANSLATE_NOOP("bitcoin-core", "Importing bootstrap blockchain data file."), +QT_TRANSLATE_NOOP("bitcoin-core", "Importing blocks from block database..."), QT_TRANSLATE_NOOP("bitcoin-core", "Imports blocks from external blk000?.dat file"), QT_TRANSLATE_NOOP("bitcoin-core", "Insufficient funds"), QT_TRANSLATE_NOOP("bitcoin-core", "Invalid -proxy address: '%s'"), @@ -118,6 +134,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Output extra debugging information. Implies a QT_TRANSLATE_NOOP("bitcoin-core", "Output extra network debugging information"), QT_TRANSLATE_NOOP("bitcoin-core", "Password for JSON-RPC connections"), QT_TRANSLATE_NOOP("bitcoin-core", "Prepend debug output with timestamp"), +QT_TRANSLATE_NOOP("bitcoin-core", "Rebuild blockchain index from current blk000??.dat files"), QT_TRANSLATE_NOOP("bitcoin-core", "Rescan the block chain for missing wallet transactions"), QT_TRANSLATE_NOOP("bitcoin-core", "Rescanning..."), QT_TRANSLATE_NOOP("bitcoin-core", "Run in the background as a daemon and accept commands"), @@ -131,7 +148,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Sending..."), QT_TRANSLATE_NOOP("bitcoin-core", "Server certificate file (default: server.cert)"), QT_TRANSLATE_NOOP("bitcoin-core", "Server private key (default: server.pem)"), QT_TRANSLATE_NOOP("bitcoin-core", "Set database cache size in megabytes (default: 25)"), -QT_TRANSLATE_NOOP("bitcoin-core", "Set database disk log size in megabytes (default: 100)"), QT_TRANSLATE_NOOP("bitcoin-core", "Set key pool size to (default: 100)"), QT_TRANSLATE_NOOP("bitcoin-core", "Set maximum block size in bytes (default: 250000)"), QT_TRANSLATE_NOOP("bitcoin-core", "Set minimum block size in bytes (default: 0)"), @@ -155,7 +171,9 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Use UPnP to map the listening port (default: QT_TRANSLATE_NOOP("bitcoin-core", "Use proxy to reach tor hidden services (default: same as -proxy)"), QT_TRANSLATE_NOOP("bitcoin-core", "Use the test network"), QT_TRANSLATE_NOOP("bitcoin-core", "Username for JSON-RPC connections"), +QT_TRANSLATE_NOOP("bitcoin-core", "Verifying database integrity..."), QT_TRANSLATE_NOOP("bitcoin-core", "Wallet needed to be rewritten: restart Bitcoin to complete"), QT_TRANSLATE_NOOP("bitcoin-core", "Warning: Disk space is low!"), QT_TRANSLATE_NOOP("bitcoin-core", "Warning: This version is obsolete, upgrade required!"), +QT_TRANSLATE_NOOP("bitcoin-core", "wallet.dat corrupt, salvage failed"), }; \ No newline at end of file diff --git a/src/qt/locale/bitcoin_en.ts b/src/qt/locale/bitcoin_en.ts index ee9967e15..c70ea652d 100644 --- a/src/qt/locale/bitcoin_en.ts +++ b/src/qt/locale/bitcoin_en.ts @@ -300,17 +300,17 @@ This product includes software developed by the OpenSSL Project for use in the O BitcoinGUI - + Sign &message... Sign &message... - + Synchronizing with network... Synchronizing with network... - + &Overview &Overview @@ -320,7 +320,7 @@ This product includes software developed by the OpenSSL Project for use in the O Show general overview of wallet - + &Transactions &Transactions @@ -330,7 +330,7 @@ This product includes software developed by the OpenSSL Project for use in the O Browse transaction history - + &Address Book &Address Book @@ -340,7 +340,7 @@ This product includes software developed by the OpenSSL Project for use in the O Edit the list of stored addresses and labels - + &Receive coins &Receive coins @@ -350,12 +350,12 @@ This product includes software developed by the OpenSSL Project for use in the O Show the list of addresses for receiving payments - + &Send coins &Send coins - + E&xit E&xit @@ -385,7 +385,7 @@ This product includes software developed by the OpenSSL Project for use in the O &Options... - + &Encrypt Wallet... &Encrypt Wallet... @@ -399,8 +399,18 @@ This product includes software developed by the OpenSSL Project for use in the O &Change Passphrase... &Change Passphrase... + + + Importing blocks from disk... + Importing blocks from disk... + + + + Reindexing blocks on disk... + Reindexing blocks on disk... + - + ~%n block(s) remaining ~%n block remaining @@ -408,37 +418,27 @@ This product includes software developed by the OpenSSL Project for use in the O - - Downloaded %1 of %2 blocks of transaction history (%3% done). - Downloaded %1 of %2 blocks of transaction history (%3% done). - - - + &Export... &Export... - + Send coins to a Bitcoin address Send coins to a Bitcoin address - + Modify configuration options for Bitcoin Modify configuration options for Bitcoin - + Export the data in the current tab to a file Export the data in the current tab to a file - - Encrypt or decrypt wallet - Encrypt or decrypt wallet - - - + Backup wallet to another location Backup wallet to another location @@ -448,7 +448,7 @@ This product includes software developed by the OpenSSL Project for use in the O Change the passphrase used for wallet encryption - + &Debug window &Debug window @@ -458,12 +458,12 @@ This product includes software developed by the OpenSSL Project for use in the O Open debugging and diagnostic console - + &Verify message... &Verify message... - + Bitcoin Bitcoin @@ -473,7 +473,7 @@ This product includes software developed by the OpenSSL Project for use in the O Wallet - + &About Bitcoin &About Bitcoin @@ -483,7 +483,27 @@ This product includes software developed by the OpenSSL Project for use in the O &Show / Hide - + + Show or hide the main Window + Show or hide the main Window + + + + Encrypt the private keys that belong to your wallet + Encrypt the private keys that belong to your wallet + + + + Sign messages with your Bitcoin addresses to prove you own them + Sign messages with your Bitcoin addresses to prove you own them + + + + Verify messages to ensure they were signed with specified Bitcoin addresses + Verify messages to ensure they were signed with specified Bitcoin addresses + + + &File &File @@ -509,12 +529,11 @@ This product includes software developed by the OpenSSL Project for use in the O - + [testnet] [testnet] - Bitcoin client Bitcoin client @@ -528,12 +547,22 @@ This product includes software developed by the OpenSSL Project for use in the O - - Downloaded %1 blocks of transaction history. - Downloaded %1 blocks of transaction history. + + Processed %1 of %2 blocks of transaction history (%3% done). + Processed %1 of %2 blocks of transaction history (%3% done). + + + + Processed %1 blocks of transaction history. + Processed %1 blocks of transaction history. + + + + This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee? + This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee? - + %n second(s) ago %n second ago @@ -580,12 +609,7 @@ This product includes software developed by the OpenSSL Project for use in the O Last received block was generated %1. - - This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee? - This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee? - - - + Confirm transaction fee Confirm transaction fee @@ -614,13 +638,13 @@ Address: %4 - + URI handling URI handling - - + + URI can not be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. URI can not be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. @@ -812,16 +836,6 @@ Address: %4 &Start Bitcoin on system login &Start Bitcoin on system login - - - Detach block and address databases at shutdown. This means they can be moved to another data directory, but it slows down shutdown. The wallet is always detached. - Detach block and address databases at shutdown. This means they can be moved to another data directory, but it slows down shutdown. The wallet is always detached. - - - - &Detach databases at shutdown - &Detach databases at shutdown - &Network @@ -958,7 +972,7 @@ Address: %4 default - + Warning Warning @@ -983,7 +997,7 @@ Address: %4 Form - + The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. @@ -1039,7 +1053,7 @@ Address: %4 Total number of transactions in wallet - + out of sync out of sync @@ -1120,7 +1134,7 @@ Address: %4 - + N/A N/A @@ -1351,8 +1365,8 @@ Address: %4 - Error: Transaction creation failed. - Error: Transaction creation failed. + Error: Transaction creation failed! + Error: Transaction creation failed! @@ -1378,23 +1392,23 @@ Address: %4 Pay &To: - + + The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) + The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) + + + Enter a label for this address to add it to your address book Enter a label for this address to add it to your address book - + &Label: &Label: - - The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - - - + Choose address from address book Choose address from address book @@ -1757,7 +1771,7 @@ Address: %4 Transaction - + Inputs Inputs @@ -1777,7 +1791,7 @@ Address: %4 false - + , has not been successfully broadcast yet , has not been successfully broadcast yet @@ -2099,32 +2113,32 @@ Address: %4 bitcoin-core - + Bitcoin version Bitcoin version - + Usage: Usage: - + Send command to -server or bitcoind Send command to -server or bitcoind - + List commands List commands - + Get help for a command Get help for a command - + Options: Options: @@ -2139,7 +2153,7 @@ Address: %4 Specify pid file (default: bitcoind.pid) - + Generate coins Generate coins @@ -2149,20 +2163,15 @@ Address: %4 Don't generate coins - + Specify data directory Specify data directory - + Set database cache size in megabytes (default: 25) Set database cache size in megabytes (default: 25) - - - Set database disk log size in megabytes (default: 100) - Set database disk log size in megabytes (default: 100) - Listen for connections on <port> (default: 8333 or testnet: 18333) @@ -2174,85 +2183,115 @@ Address: %4 Maintain at most <n> connections to peers (default: 125) - + Connect to a node to retrieve peer addresses, and disconnect Connect to a node to retrieve peer addresses, and disconnect - + Specify your own public address Specify your own public address - - Bind to given address. Use [host]:port notation for IPv6 - Bind to given address. Use [host]:port notation for IPv6 - - - + Threshold for disconnecting misbehaving peers (default: 100) Threshold for disconnecting misbehaving peers (default: 100) - + Number of seconds to keep misbehaving peers from reconnecting (default: 86400) Number of seconds to keep misbehaving peers from reconnecting (default: 86400) - + An error occurred while setting up the RPC port %u for listening on IPv4: %s An error occurred while setting up the RPC port %u for listening on IPv4: %s - - Detach block and address databases. Increases shutdown time (default: 0) - Detach block and address databases. Increases shutdown time (default: 0) - - - + Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332) Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332) - + Accept command line and JSON-RPC commands Accept command line and JSON-RPC commands - - Importing blockchain data file. - Importing blockchain data file. - - - - Importing bootstrap blockchain data file. - Importing bootstrap blockchain data file. - - - + Run in the background as a daemon and accept commands Run in the background as a daemon and accept commands - + Use the test network Use the test network - + Accept connections from outside (default: 1 if no -proxy or -connect) Accept connections from outside (default: 1 if no -proxy or -connect) - + + %s, you must set a rpcpassword in the configuration file: + %s +It is recommended you use the following random password: +rpcuser=bitcoinrpc +rpcpassword=%s +(you do not need to remember this password) +The username and password MUST NOT be the same. +If the file does not exist, create it with owner-readable-only file permissions. + + %s, you must set a rpcpassword in the configuration file: + %s +It is recommended you use the following random password: +rpcuser=bitcoinrpc +rpcpassword=%s +(you do not need to remember this password) +The username and password MUST NOT be the same. +If the file does not exist, create it with owner-readable-only file permissions. + + + An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s - + + Bind to given address and always listen on it. Use [host]:port notation for IPv6 + Bind to given address and always listen on it. Use [host]:port notation for IPv6 + + + + Cannot obtain a lock on data directory %s. Bitcoin is probably already running. + Cannot obtain a lock on data directory %s. Bitcoin is probably already running. + + + + Error initializing database environment %s! To recover, BACKUP THAT DIRECTORY, then remove everything from it except for wallet.dat. + Error initializing database environment %s! To recover, BACKUP THAT DIRECTORY, then remove everything from it except for wallet.dat. + + + + Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. + Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. + + + + Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! + Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! + + + Set maximum size of high-priority/low-fee transactions in bytes (default: 27000) Set maximum size of high-priority/low-fee transactions in bytes (default: 27000) + + + This is a pre-release test build - use at your own risk - do not use for mining or merchant applications + This is a pre-release test build - use at your own risk - do not use for mining or merchant applications + Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. @@ -2269,7 +2308,22 @@ Address: %4 Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin will not work properly. - + + Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. + Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. + + + + Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. + Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. + + + + Attempt to recover private keys from a corrupt wallet.dat + Attempt to recover private keys from a corrupt wallet.dat + + + Block creation options: Block creation options: @@ -2284,7 +2338,17 @@ Address: %4 Discover own IP address (default: 1 when listening and no -externalip) - + + Error: Transaction creation failed! + Error: Transaction creation failed! + + + + Error: Wallet locked, unable to create transaction! + Error: Wallet locked, unable to create transaction! + + + Failed to listen on any port. Use -listen=0 if you want this. Failed to listen on any port. Use -listen=0 if you want this. @@ -2294,7 +2358,12 @@ Address: %4 Find peers using DNS lookup (default: 1 unless -connect) - + + Importing blocks from block database... + Importing blocks from block database... + + + Invalid -tor address: '%s' Invalid -tor address: '%s' @@ -2328,6 +2397,11 @@ Address: %4 Prepend debug output with timestamp Prepend debug output with timestamp + + + Rebuild blockchain index from current blk000??.dat files + Rebuild blockchain index from current blk000??.dat files + SSL options: (see the Bitcoin Wiki for SSL setup instructions) @@ -2349,7 +2423,7 @@ Address: %4 Send trace/debug info to debugger - + Set maximum block size in bytes (default: 250000) Set maximum block size in bytes (default: 250000) @@ -2388,6 +2462,11 @@ Address: %4 Username for JSON-RPC connections Username for JSON-RPC connections + + + Verifying database integrity... + Verifying database integrity... + Warning: Disk space is low! @@ -2399,12 +2478,17 @@ Address: %4 Warning: This version is obsolete, upgrade required! - + + wallet.dat corrupt, salvage failed + wallet.dat corrupt, salvage failed + + + Password for JSON-RPC connections Password for JSON-RPC connections - + Allow JSON-RPC connections from specified IP address Allow JSON-RPC connections from specified IP address @@ -2414,12 +2498,12 @@ Address: %4 Send commands to node running on <ip> (default: 127.0.0.1) - + Execute command when the best block changes (%s in cmd is replaced by block hash) Execute command when the best block changes (%s in cmd is replaced by block hash) - + Upgrade wallet to latest format Upgrade wallet to latest format @@ -2429,7 +2513,7 @@ Address: %4 Set key pool size to <n> (default: 100) - + Rescan the block chain for missing wallet transactions Rescan the block chain for missing wallet transactions @@ -2444,7 +2528,7 @@ Address: %4 How thorough the block verification is (0-6, default: 1) - + Imports blocks from external blk000?.dat file Imports blocks from external blk000?.dat file @@ -2454,7 +2538,7 @@ Address: %4 Use OpenSSL (https) for JSON-RPC connections - + Server certificate file (default: server.cert) Server certificate file (default: server.cert) @@ -2464,32 +2548,27 @@ Address: %4 Server private key (default: server.pem) - + Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH) Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH) - + This help message This help message - - Cannot obtain a lock on data directory %s. Bitcoin is probably already running. - Cannot obtain a lock on data directory %s. Bitcoin is probably already running. - - - + Bitcoin Bitcoin - + Unable to bind to %s on this computer (bind returned error %d, %s) Unable to bind to %s on this computer (bind returned error %d, %s) - + Connect through socks proxy Connect through socks proxy @@ -2499,12 +2578,12 @@ Address: %4 Allow DNS lookups for -addnode, -seednode and -connect - + Loading addresses... Loading addresses... - + Error loading blkindex.dat Error loading blkindex.dat @@ -2529,7 +2608,7 @@ Address: %4 Error loading wallet.dat - + Invalid -proxy address: '%s' Invalid -proxy address: '%s' @@ -2544,7 +2623,7 @@ Address: %4 Unknown -socks proxy version requested: %i - + Cannot resolve -bind address: '%s' Cannot resolve -bind address: '%s' @@ -2554,42 +2633,22 @@ Address: %4 Cannot resolve -externalip address: '%s' - + Invalid amount for -paytxfee=<amount>: '%s' Invalid amount for -paytxfee=<amount>: '%s' - + Error: could not start node Error: could not start node - - Error: Wallet locked, unable to create transaction - Error: Wallet locked, unable to create transaction - - - - Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds - Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds - - - - Error: Transaction creation failed - Error: Transaction creation failed - - - + Sending... Sending... - - Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. - Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. - - - + Invalid amount Invalid amount @@ -2604,17 +2663,17 @@ Address: %4 Loading block index... - + Add a node to connect to and attempt to keep the connection open Add a node to connect to and attempt to keep the connection open - + Unable to bind to %s on this computer. Bitcoin is probably already running. Unable to bind to %s on this computer. Bitcoin is probably already running. - + Find peers using internet relay chat (default: 0) Find peers using internet relay chat (default: 0) @@ -2624,12 +2683,12 @@ Address: %4 Fee per KB to add to transactions you send - + Loading wallet... Loading wallet... - + Cannot downgrade wallet Cannot downgrade wallet @@ -2654,31 +2713,12 @@ Address: %4 Done loading - + To use the %s option To use the %s option - - %s, you must set a rpcpassword in the configuration file: - %s -It is recommended you use the following random password: -rpcuser=bitcoinrpc -rpcpassword=%s -(you do not need to remember this password) -If the file does not exist, create it with owner-readable-only file permissions. - - %s, you must set a rpcpassword in the configuration file: - %s -It is recommended you use the following random password: -rpcuser=bitcoinrpc -rpcpassword=%s -(you do not need to remember this password) -If the file does not exist, create it with owner-readable-only file permissions. - - - - + Error Error