fafe73a626 qa: Raise feature_help timeout to 5s (MarcoFalke)
faabd7bc47 qa: Use files for stdout/stderr to support Windows (MarcoFalke)
facb56ffaf qa: Run gen_rpcauth with sys.executable (MarcoFalke)
fada8966c5 qa: Close stdout and stderr file when node stops (MarcoFalke)
Pull request description:
### qa: Close stdout and stderr file when node stops
Since these files are potentially deleted by the test framework for cleanup, they should be closed first. Otherwise this will lead to errors on Windows when the tests finish successfully.
Side note: After the patch, it is no longer possible to reopen the file on Windows (see https://docs.python.org/3/library/tempfile.html#tempfile.NamedTemporaryFile)
### qa: Run gen_rpcauth with sys.executable
Similar to `test_runner.py`, the `sys.executable` needs to be passed down into subprocesses to pass on native Windows. (Should have no effect on Linux)
### qa: Use files for stdout/stderr to support Windows
It seems that using PIPE is not supported on Windows. Also, it is easier to just use the files that capture the stdout and stderr within the test node class.
Tree-SHA512: ec675012b10705978606b7fcbdb287c39a8e6e3732aae2fa4041d963a3c6993c6eac6a9a3cbd5479514e7d8017fe74c12235d1ed6fed2e8af8f3c71981e91864
fa85c985ed qa: Add p2p_invalid_locator test (MarcoFalke)
Pull request description:
Should not be merged *before* #13907
Tree-SHA512: a67ca407854c421ed20a184d0b0dc90085aed3e3431d9652a107fa3022244767e67f67e50449b7e95721f56906836b134615875f28a21e8a012eb22cfe6a66a5
bb5b1c0b2d [Docs] upgrade rescan time warning from minutes to >1 hour (Mason Simon)
Pull request description:
When I rescanned just now it took well over an hour. The time warning "may take minutes" didn't prepare me for that.
```
2018-08-08T03:10:17Z [wallet] Still rescanning. At block 174747. Progress=0.008341
2018-08-08T03:11:17Z [wallet] Still rescanning. At block 204233. Progress=0.024533
2018-08-08T03:12:17Z [wallet] Still rescanning. At block 221170. Progress=0.038340
...
2018-08-08T04:16:17Z [wallet] Still rescanning. At block 524815. Progress=0.957105
2018-08-08T04:17:17Z [wallet] Still rescanning. At block 528572. Progress=0.971323
2018-08-08T04:18:17Z [wallet] Still rescanning. At block 532458. Progress=0.986824
```
This is on a 4-core 4ghz system with a 7200rpm drive.
Tree-SHA512: 722ccf566bfd6a3381fa173e08849cb676fe4c1f1cb2c4b86b07df2a5dc1ca0d54797cbe8fd606cdc2c60fef2be7c98e052460decdac2132ba759cff822132e8
227d27e70c Use pushKV in some new PSBT RPCs. (Daniel Kraft)
Pull request description:
Most of the code uses `UniValue::pushKV` where appropriate, but some new RPC code related to PSBTs did not. This fixes those places - after this change, there are no remaining source files I could find that contain `push_back(Pair(`.
Tree-SHA512: d6567cf144d05d7e42276bd66ff4cd44413328f985772d11bb9d7339d32ab7c3438d4bb0040a37e75f8d193c610b08fa971073935885e0a178546aa045daf9fa
1f87c372b5 Simplify comparison in rpc_blockchain.py. (Daniel Kraft)
Pull request description:
The test for `gettxoutsetinfo` in `rpc_blockchain.py` verifies that the result is the same as before after invalidating and reconsidering a block. The comparison has to exclude the `disk_size` field, though, as it is not deterministic.
Instead of comparing all the other fields for equality, this change explicitly removes the `disk_size` field and then compares the full objects. This makes the intent more explicit (compare everything except for `disk_size`, not compare just a given list of fields) and also the code simpler.
Tree-SHA512: 3c376a8836b62988fb2f0117c9ca65de64a33bf3cd4980a123de30bf5e7b7a48eda477b25e03d672ff076e205c698e83432469156caa0f0f3ebbb0480f0dd77d
e254ff5d53 Introduce a maximum size for locators. (Gregory Maxwell)
Pull request description:
The largest sensible size for a locator is log in the number of blocks.
But, as noted by Coinr8d on BCT a maximum size message could encode a
hundred thousand locators. If height were used to limit the messages
that could open new attacks where peers on long low diff forks would
get disconnected and end up stuck.
Ideally, nodes first first learn to limit the size of locators they
send before limiting what would be processed, but common implementations
back off with an exponent of 2 and have an implicit limit of 2^32
blocks, so they already cannot produce locators over some size.
Locators are cheap to process so allowing a few more is harmless,
so this sets the maximum to 64-- which is enough for blockchains
with 2^64 blocks before the get overhead starts increasing.
Tree-SHA512: da28df9c46c988980da861046c62e6e7f93d0eaab3083d32e408d1062f45c00316d5e1754127e808c1feb424fa8e00e5a91aea2cc3b80326b71c148696f7cdb3
With watching only inputs, we do not know how large the signatures
for those inputs will be as their signers may not have implemented
71 byte signatures. Thus we estimate their fees using the 72 byte
dummy signature to ensure that we pay enough fees.
This only effects fundrawtransaction when includeWatching is true.
When extra entropy is not specified by the caller, CKey::Sign will
now always create a signature that has a low R value and is at most
70 bytes. The resulting signature on the stack will be 71 bytes when
the sighash byte is included.
Using low R signatures means that the resulting DER encoded signature
will never need to have additional padding to account for high R
values.
The largest sensible size for a locator is log in the number of blocks.
But, as noted by Coinr8d on BCT a maximum size message could encode a
hundred thousand locators. If height were used to limit the messages
that could open new attacks where peers on long low diff forks would
get disconnected and end up stuck.
Ideally, nodes first first learn to limit the size of locators they
send before limiting what would be processed, but common implementations
back off with an exponent of 2 and have an implicit limit of 2^32
blocks, so they already cannot produce locators over some size.
This sets the limit to an absurdly high amount of 101 in order to
maximize compatibility with existing software.
Calls ReloadDbEnv after encrypting the wallet so that the database
environment is flushed, closed, and reopened to prevent unencrypted
keys from being saved on disk.
Adds a ReloadDbEnv function to BerkeleyEnvironment in order to close all Db
instances, closes the environment, resets it, and then reopens
the BerkeleyEnvironment.
Also adds a ReloadDbEnv function to BerkeleyDatabase that calls
BerkeleyEnvironment's ReloadDbEnv.
524b7e36a8 Merge #19: Increase maximum read-only mmap()s used from 1000 to 4096 on 64-bit systems
4874cb8d3e Increase maximum number of read-only mmap()s used from 1000 to 4096 on 64 bit systems.
git-subtree-dir: src/leveldb
git-subtree-split: 524b7e36a8e3bce6fcbcd1b5df09024283f325ba
The test for gettxoutsetinfo in rpc_blockchain.py verifies that the
result is the same as before after invalidating and reconsidering a
block. The comparison has to exclude the 'disk_size' field, though, as
it is not deterministic.
Instead of comparing all the other fields for equality, this change
explicitly removes the 'disk_size' field and then compares the full
objects. This makes the intent more explicit (compare everything except
for disk_size, not compare just a given list of fields) and also the
code simpler.
fa5587fe71 qa: wait_for_verack by default (MarcoFalke)
Pull request description:
This removes the need to do so manually every time a connection is added.
Tree-SHA512: a46c92cb4df41e30778b42b9fd3dcbd8d2d82aa7503d1213cb1c1165034f648d8caee01c292e2d87d05b0f71696996eef5be8a753f35ab49e5f66b0e3bf29f21
faab63111d shutdown: Stop threads before resetting ptrs (MarcoFalke)
Pull request description:
On shutdown some threads would continue to run after or during a pointer reset. This leads to occasional segfaults on shutdown.
Fix this by resetting the smart pointers after all threads that might read from them have been stopped.
This should fix:
* A segfault in the txindex thread, that occurs when the txindex destructor is done, but the thread was not yet stopped (as this is done in the base index destructor)
* A segfault in the scheduler thread, which dereferences conman. (e.g. CheckForStaleTipAndEvictPeers)
Tree-SHA512: abbcf67fadd088e10fe8c384fadfb90bb115d5317145ccb5363603583b320efc18131e46384f55a9bc574969013dfcbd08c49e0d42c004ed7212eca193858ab2
3fc20632a3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28 Regenerate manpages (DrahtBot)
eb7daf4d60 Update copyright headers to 2018 (DrahtBot)
Pull request description:
Some trivial maintenance to avoid having to do it again after the 0.17 branch off.
(The scripts to do this are in `./contrib/`)
Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa
ParseHashV validates the length and encoding of the string and throws
an informative RPC error on failure, which is as good or better than
these alternative calls.
Note I switched ParseHashV to check string length first, because
IsHex tests that the length is even, and an error like:
"must be of length 64 (not 63, for X)" is much more informative than
"must be hexadecimal string (not X)"
23fbbb100f wallet: sum ancestors rather than taking max in output groups (Karl-Johan Alm)
Pull request description:
This is pointed out in https://github.com/bitcoin/bitcoin/pull/12257#discussion_r204549758.
Basically, the ancestors gives an indication as to how many ancestors the resulting transaction will have, which is more precise when summing up the values, rather than taking the maximum, since all the coins in the group will become ancestors if selected.
Tree-SHA512: 0588c4b6059669650614817e041526a2ab89dda8c07fca8e077c7669dca1fed51cd164f7df56340840ab60285d48f3b140dcee64f64bf696b2dd4ab16d556a13
13bb5cae31 Docs: fix GetWarnings docs to reflect behavior (Ben Woosley)
Pull request description:
In "gui", it returns all warnings, joined by a separator
In "statusbar", it returns the last warning set which seems notionally to be the most important, though that is debatable
Tree-SHA512: 5fc0dc68d143a040b7b893b7176188e2b064c2cf1d559420906e4de636e16e9ab7451a1b87603020a7a8f66d6b94f4ee6c7da2697efad879f9e6de9c0e0c9ac1
faa24441ec policy: Remove promiscuousmempoolflags (MarcoFalke)
Pull request description:
It seems odd to clutter validation code with features that can only ever be used for testing (testnet or regtest). Removing that test-only code makes the mempool logic less painful to understand and easier to reason about when changed or refactored in the future.
Tree-SHA512: 3b897aa9604ac8d82ebe9573c6efd468c93ddaa08d378ebc902e247b7aa6c68fcde71e5b449c08f17a067146cdc66dc50a67ce06d07607c27e5189a49c3fba3f
