SequenceLocks functions are used to evaluate sequence lock times or heights per BIP 68.
The majority of this code is copied from maaku in #6312
Further credit: btcdrak, sipa, NicolasDorier
This test is no longer relevant.
It was introduced in 8c222dca4f to check
the switch to 1MB blocks after the BDB too-many-locks issue back in
2013. The switching code has been long since removed.
It also needs a specific data file that is hard to find. I've verified
in #6320 that it still passes, however I think there is zero reason to
keep it.
Closes#6320.
fad6244 ATMP: make nAbsurdFee const (MarcoFalke)
fa762d0 [wallet.h] Remove main.h include (MarcoFalke)
fa79db2 Move maxTxFee out of mempool (MarcoFalke)
Adds several unittests for CAddrMan and CAddrInfo.
Increases the accuracy of addrman tests.
Removes non-determinism in tests by overriding the random number generator.
Extracts testing code from addrman class to test class.
noexcept is default for destructors as of c++11. By throwing in reverselock's
destructor if it's lock has been tampered with, the likely result is
std::terminate being called. Indeed that happened before this change.
Once reverselock has taken another lock (its ctor didn't throw), it makes no
sense to try to grab or lock the parent lock. That is be broken/undefined
behavior depending on the parent lock's implementation, but it shouldn't cause
the reverselock to fail to re-lock when destroyed.
To avoid those problems, simply swap the parent lock's contents with a dummy
for the duration of the lock. That will ensure that any undefined behavior is
caught at the call-site rather than the reverse lock's destruction.
Barring a failed mutex unlock which would be indicative of a larger problem,
the destructor should now never throw.
We used to have a trickle node, a node which was chosen in each iteration of
the send loop that was privileged and allowed to send out queued up non-time
critical messages. Since the removal of the fixed sleeps in the network code,
this resulted in fast and attackable treatment of such broadcasts.
This pull request changes the 3 remaining trickle use cases by random delays:
* Local address broadcast (while also removing the the wiping of the seen filter)
* Address relay
* Inv relay (for transactions; blocks are always relayed immediately)
The code is based on older commits by Patrick Strateman.
aa4b0c2 When not filtering blocks, getdata sends more in one test (Pieter Wuille)
d41e44c Actually only use filterInventoryKnown with MSG_TX inventory messages. (Gregory Maxwell)
b6a0da4 Only use filterInventoryKnown with MSG_TX inventory messages. (Patick Strateman)
6b84935 Rename setInventoryKnown filterInventoryKnown (Patick Strateman)
e206724 Remove mruset as it is no longer used. (Gregory Maxwell)
ec73ef3 Replace setInventoryKnown with a rolling bloom filter. (Gregory Maxwell)
Use the score index on the mempool to only add sorted txs in order. Remove much of the validation while building the block, relying on mempool to be consistent and only contain txs that can be mined.
The mempool is assumed to be consistent as far as not containing txs which spend non-existent outputs or double spends, and scripts are valid. Finality of txs is still checked (except not coinbase maturity, assumed in mempool).
Still TestBlockValidity in case mempool consistency breaks and return error state if an invalid block was created.
Unit tests are modified to realize that invalid blocks can now be constructed if the mempool breaks its consistency assumptions and also updated to have the right fees, since the cached value is now used for block construction.
Conflicts:
src/miner.cpp
The score index is meant to represent the order of priority for being included in a block for miners. Initially this is set to the transactions modified (by any feeDelta) fee rate. Index improvements and unit tests by sdaftuar.
Store sum of legacy and P2SH sig op counts. This is calculated in AcceptToMemory pool and storing it saves redoing the expensive calculation in block template creation.
This switches the Merkle tree logic for blocks to one that runs in constant (small) space.
The old code is moved to tests, and a new test is added that for various combinations of
block sizes, transaction positions to compute a branch for, and mutations:
* Verifies that the old code and new code agree for the Merkle root.
* Verifies that the old code and new code agree for the Merkle branch.
* Verifies that the computed Merkle branch is valid.
* Verifies that mutations don't change the Merkle root.
* Verifies that mutations are correctly detected.
1) Chainparams: Explicit CChainParams arg for main:
-AcceptBlock
-AcceptBlockHeader
-ActivateBestChain
-ConnectTip
-InitBlockIndex
-LoadExternalBlockFile
-VerifyDB parametric constructor
2) Also pickup more Params()\. in main.cpp
3) Pass nPruneAfterHeight explicitly to new FindFilesToPrune() in main.cpp
Compute the value of inputs that already are in the chain at time of mempool entry and only increase priority due to aging for those inputs. This effectively changes the CTxMemPoolEntry's GetPriority calculation from an upper bound to a lower bound.
Previously it would break if you flushed a parent cache while there was a child cache referring to it. This change will allow the flushing of parent caches.
1cf3dd8 Add unit test for UpdateCoins (Alex Morcos)
03c8282 Make CCoinsViewTest behave like CCoinsViewDB (Alex Morcos)
14470f9 ModifyNewCoins saves database lookups (Alex Morcos)
This provides more conservative estimates and reacts more quickly to a backlog.
Unfortunately the unit test for fee estimation depends on the success threshold (and the decay) chosen; also modify the unit test for the new default success thresholds.
40cd32e Revert "Add rules--presently disabled--for using GetMedianTimePast as endpoint for lock-time calculations" (Gregory Maxwell)
8537ecd Revert "Enable policy enforcing GetMedianTimePast as the end point of lock-time constraints" (Gregory Maxwell)
Update the unittest that is meant to catch a transaction that is invalid
because it has a null input. The old test failed not because of that
but because it was considered a coinbase with too large script. This is
already checked with a different test, though.
The new test is *not* a coinbase since it has two inputs, but one of
them is null. This really checks the corresponding code path in
CheckTransaction.
143d173 Use BOOST_CHECK_MESSAGE() rather than BOOST_CHECK() in alerts_tests.cpp and initialize strMiscWarning before calling PartitionCheck()." (Eric Lombrozo)
Transactions are not allowed in the memory pool or selected for inclusion in a block until their lock times exceed chainActive.Tip()->GetMedianTimePast(). However blocks including transactions which are only mature under the old rules are still accepted; this is *not* the soft-fork required to actually rely on the new constraint in production.
1534d9a Creates unittests for addrman, makes addrman testable. Adds several unittests for addrman to verify it works as expected. Makes small modifications to addrman to allow deterministic and targeted tests. (EthanHeilman)
Adds an `obfuscate` parameter to `CLevelDBWrapper` and makes use of it
for all new chainstate stores built via `CCoinsViewDB`. Also adds an
`Xor` method to `CDataStream`.
Thanks to @sipa @laanwj @pstratem @dexX7 @KyrosKrane @gmaxwell.
Previously only one PUSHDATA was allowed, needlessly limiting
applications such as matching OP_RETURN contents with bloom filters that
operate on a per-PUSHDATA level. Now any combination that passes
IsPushOnly() is allowed, so long as the total size of the scriptPubKey
is less than 42 bytes. (unchanged modulo non-minimal PUSHDATA encodings)
Also, this fixes the odd bug where previously the PUSHDATA could be
replaced by any single opcode, even sigops consuming opcodes such as
CHECKMULTISIG. (20 sigops!)
af3208b Resolve issue 3166. These changes decode valid SIGHASH types on signatures in assembly (asm) representations of scriptSig scripts. This squashed commit incorporates substantial helpful feedback from jtimon, laanwj, and sipa. (mruddy)
Assume that when a wallet transaction has a valid block hash and transaction position
in it, the transaction is actually there. We're already trusting wallet data in a
much more fundamental way anyway.
To prevent backward compatibility issues, a new record is used for storing the
block locator in the wallet. Old wallets will see a wallet file synchronized up
to the genesis block, and rescan automatically.
7aac6db [QT] dump banlist to disk in case of ban/unban over QT (Jonas Schnelli)
7f90ea7 [QA] adabt QT_NO_KEYWORDS for QT ban implementation (Jonas Schnelli)
07f70b2 [QA] fix netbase tests because of new CSubNet::ToString() output (Jonas Schnelli)
4ed0510 [Qt] call DumpBanlist() when baning unbaning nodes (Philip Kaufmann)
be89292 [Qt] reenabling hotkeys for ban context menu, use different words (Jonas Schnelli)
b1189cf [Qt] adapt QT ban option to banlist.dat changes (Jonas Schnelli)
65abe91 [Qt] add sorting for bantable (Philip Kaufmann)
51654de [Qt] bantable polish (Philip Kaufmann)
cdd72cd [Qt] simplify ban list signal handling (Philip Kaufmann)
43c1f5b [Qt] remove unused timer-code from banlistmodel.cpp (Jonas Schnelli)
e2b8028 net: Fix CIDR notation in ToString() (Wladimir J. van der Laan)
9e521c1 [Qt] polish ban table (Philip Kaufmann)
607809f net: use CIDR notation in CSubNet::ToString() (Jonas Schnelli)
53caec6 [Qt] bantable overhaul (Jonas Schnelli)
f0bcbc4 [Qt] bantable fix timestamp 64bit issue (Jonas Schnelli)
6135309 [Qt] banlist, UI optimizing and better signal handling (Jonas Schnelli)
770ca79 [Qt] add context menu with unban option to ban table (Jonas Schnelli)
5f42132 [Qt] add ui signal for banlist changes (Jonas Schnelli)
ad204df [Qt] add banlist table below peers table (Jonas Schnelli)
50f0908 [Qt] add ban functions to peers window (Jonas Schnelli)
Associate with each CTxMemPoolEntry all the size/fees of descendant
mempool transactions. Sort mempool by max(feerate of entry, feerate
of descendants). Update statistics on-the-fly as transactions enter
or leave the mempool.
Also add ancestor and descendant limiting, so that transactions can
be rejected if the number or size of unconfirmed ancestors exceeds
a target, or if adding a transaction would cause some other mempool
entry to have too many (or too large) a set of unconfirmed in-
mempool descendants.
d528025 Revert "rpc-tests: re-enable rpc-tests for Windows" (Wladimir J. van der Laan)
1e700c9 doc: update deps in build-unix.md after libevent (Wladimir J. van der Laan)
26c9b83 Move windows socket init to utility function (Wladimir J. van der Laan)
4be0b08 libevent: Windows reuseaddr workaround in depends (Cory Fields)
3a174cd Fix race condition between starting HTTP server thread and setting EventBase() (Wladimir J. van der Laan)
6d2bc22 Document options for new HTTP/RPC server in --help (Wladimir J. van der Laan)
be33f3f Implement RPCTimerHandler for Qt RPC console (Wladimir J. van der Laan)
57d85d9 doc: mention SSL support dropped for RPC in release notes (Wladimir J. van der Laan)
40b556d evhttpd implementation (Wladimir J. van der Laan)
ee2a42b tests: GET requests cannot have request body, use POST in rest.py (Wladimir J. van der Laan)
6e996d3 tests: fix qt payment test (Cory Fields)
3140ef9 build: build-system changes for libevent (Wladimir J. van der Laan)
a9af234 libevent: add depends (Cory Fields)
6a21dd5 Remove rpc_boostasiotocnetaddr test (Wladimir J. van der Laan)
8f9301c qa: Remove -rpckeepalive tests from httpbasics (Wladimir J. van der Laan)
51fcfc0 doc: remove documentation for rpcssl (Wladimir J. van der Laan)
Fix https://github.com/bitcoin/bitcoin/issues/6558. In particular, stop
parsing JSON after the first object or array is finished. Check that no
other garbage follows, and fail the parser if it does.
c5c1edf Fix spelling mistake in -> if. (Mark Friedenbach)
e846b2a Correct a possibly intentional pun that is nevertheless hard to read: "two times of nLockTime." What is meant is that there are two kinds, or categories of nLockTime. (Mark Friedenbach)
627468d Add support for data-based outputs (OP_RETURN) to bitcoin-tx. (Pavel Janík)
d707853 Add OP_RETURN support in createrawtransaction RPC call, add tests. (Pavel Janík)
a8d0407 Move recentRejects initialization to top of InitBlockIndex (Wladimir J. van der Laan)
0847d9c Keep track of recently rejected transactions (Peter Todd)
d741371 Only use randomly created nonces in CRollingBloomFilter. (Pieter Wuille)
d2d7ee0 Make CRollingBloomFilter set nTweak for you (Peter Todd)
a3d65fe Reuse vector hashing code for uint256 (Pieter Wuille)
bbe4108 Add uint256 support to CRollingBloomFilter (Peter Todd)
c6455c7 doc: mention change to option parsing behavior in release notes (Wladimir J. van der Laan)
c38c49d Fix argument parsing oddity with -noX (Wladimir J. van der Laan)
These changes decode valid SIGHASH types on signatures in assembly (asm) representations of scriptSig scripts.
This squashed commit incorporates substantial helpful feedback from jtimon, laanwj, and sipa.
While CBloomFilter is usually used with an explicitly set nTweak,
CRollingBloomFilter is only used internally. Requiring every caller to
set nTweak is error-prone and redundant; better to have the class handle
that for you with a high-quality randomness source.
Additionally when clearing the filter it makes sense to change nTweak as
well to recover from a bad setting, e.g. due to insufficient randomness
at initialization, so the clear() method is replaced by a reset() method
that sets a new, random, nTweak value.
As suggested by Greg Maxwell-- unit test to make sure a block
with a double-spend in it doesn't pass validation if half of
the double-spend is already in the memory pool (so full-blown
transaction validation is skipped) when the block is received.
`bitcoind -X -noX` ends up, unintuitively, with `X` set.
(for all boolean options X)
This result is due to the odd two-pass processing of arguments. This
patch fixes this oddity and simplifies the code at the same time.
ec249d4 util: use locale-independent parsing in ParseDouble (Wladimir J. van der Laan)
7650449 univalue: Avoid unnecessary roundtrip through double for numbers (Wladimir J. van der Laan)
e061e27 rpc: Make ValueFromAmount always return 8 decimals (Wladimir J. van der Laan)
JSON makes no distinction between numbers and reals, and our code
doesn't need to do so either.
This removes VREAL, as well as its specific post-processing in
`UniValue::write`. Non-monetary amounts do not need to be forcibly
formatted with 8 decimals, so the extra roundtrip was unnecessary
(and potentially loses precision).
This is the format that was always returned to JSON clients.
The difference was not noticed before, because VREAL values
are post-processed by univalue.
By implementing the functionality directly it breaks the dependency
of rpcserver on utilmoneystr. FormatMoney is now only used for debugging
purposes.
To test, port over the formatting tests from util_tests.cpp to
rpc_tests.cpp.
Add a function `ParseFixedPoint` that parses numbers according
to the JSON number specification and returns a 64-bit integer.
Then this in `AmountFromValue`, rather than `ParseMoney`.
Also add lots of tests (thanks to @jonasschnelli for some of them).
Fixes issue #6297.
Four cases included:
* The CLTV operand type mismatches the tx locktime. In the script it is
1 (interpreted as block height), but in the tx is 500000000
(interpreted as date)
* The stack is empty when executing OP_CLTV
* The tx is final by having only one input with MAX_INT sequence number
* The operand for CLTV is negative (after OP_0 OP_1 OP_SUB)
ffd75ad Enable CHECKLOCKTIMEVERIFY as a standard script verify flag (Peter Todd)
bc60b2b Replace NOP2 with CHECKLOCKTIMEVERIFY (BIP65) (Peter Todd)
48e9c57 Move LOCKTIME_THRESHOLD to src/script/script.h (Peter Todd)
99088d6 Make CScriptNum() take nMaxNumSize as an argument (Peter Todd)
<nLockTime> CHECKLOCKTIMEVERIFY -> <nLockTime>
Fails if tx.nLockTime < nLockTime, allowing the funds in a txout to be
locked until some block height or block time in the future is reached.
Only the logic and unittests are implemented; this commit does not have
any actual soft-fork logic in it.
Thanks to Pieter Wuille for rebase.
Credit goes to Gregory Maxwell for the suggestion of comparing the
argument against the transaction nLockTime rather than the current
time/blockheight directly.
Univalue's parsing of \u escape sequences did not handle NUL characters
correctly. They were, effectively, dropped. The extended test-case
fails with the old code, and is fixed with this patch.
7d8ffac Changes necessary now that zero values accepted in AmountFromValue (Wladimir J. van der Laan)
a04bdef Get rid of fPlus argument to FormatMoney (Wladimir J. van der Laan)
4b4b9a8 Don't go through double in AmountFromValue and ValueFromAmount (Wladimir J. van der Laan)
The partition checking code was using chainActive timestamps
to detect partitioning; with headers-first syncing, it should use
(and with this pull request, does use) pIndexBestHeader timestamps.
Fixes issue #6251
- Add an accept test for zero amounts, and a reject test for negative
amounts
- Remove ugly hack in `settxfee` that is no longer necessary
- Do explicit zero checks in wallet RPC functions
- Don't add a check for zero amounts in `createrawtransaction` - this
could be seen as a feature
Strict parsing functions for other numeric types.
- ParseInt64 analogous to ParseInt32, but for 64-bit values.
- ParseDouble for doubles.
- Make all three Parse* functions more strict (e.g. reject whitespace on
the inside)
Also add tests.
- implement find_value() function for UniValue
- replace all Array/Value/Object types with UniValues, remove JSON Spirit to UniValue wrapper
- remove JSON Spirit sources
Change `read_string` to fail when not the entire input has been
consumed. This avoids unexpected, even dangerous behavior (fixes#6223).
The new JSON parser adapted in #6121 also solves this problem so in
master this is a temporary fix, but should be backported to older releases.
Also adds tests for the new behavior.
If/when CTransaction::CURRENT_VERSION is incremented, this will break CChainParams and the miner tests. This fix sets the transaction version explicitly where we depend on the hash value (genesis block, proof of work checks).
Previously due to an off-by-one error the wallet ignored
nLockTime-by-height transactions that would be valid in the next block
even though they are accepted into the mempool. The transactions
wouldn't show up until confirmed, nor would they be included in the
unconfirmed balance. Similar to the mempool behavior fix in 665bdd3b,
the wallet code was calling IsFinalTx() directly without taking into
account the fact that doing so tells you if the transaction could have
been mined in the *current* block, rather than the next block.
To fix this we strip IsFinalTx() of non-consensus-critical
functionality, removing the default arguments, and add CheckFinalTx() to
check if a transaction will be final in the next block.
Fix two CSubNet constructor problems:
- The use of `/x` where 8 does not divide x was broken, due to a
bit-order issue
- The use of e.g. `1.2.3.4/24` where the netmasked bits in the network
are not 0 was broken. Fix this by explicitly normalizing the netwok
according to the bitmask.
Also add tests for these cases.
Fixes#6179. Thanks to @jonasschnelli for reporting and initial fix.
On a busy or slow system, the CScheduler unit test could fail because it
assumed all threads would be done after a couple of milliseconds.
Replace the hard-coded sleep with CScheduler stop() method that
will cleanly exit the servicing threads when all tasks are completely
finished.
86a5f4b Relocate calls to CheckDiskSpace (Alex Morcos)
67708ac Write block index more frequently than cache flushes (Pieter Wuille)
b3ed423 Cache tweak and logging improvements (Pieter Wuille)
fc684ad Use accurate memory for flushing decisions (Pieter Wuille)
046392d Keep track of memory usage in CCoinsViewCache (Pieter Wuille)
540629c Add memusage.h (Pieter Wuille)
Create a monitoring task that counts how many blocks have been found in the last four hours.
If very few or too many have been found, an alert is triggered.
"Very few" and "too many" are set based on a false positive rate of once every fifty years of constant running with constant hashing power, which works out to getting 5 or fewer or 48 or more blocks in four hours (instead of the average of 24).
Only one alert per day is triggered, so if you get disconnected from the network (or are being Sybil'ed) -alertnotify will be triggered after 3.5 hours but you won't get another -alertnotify for 24 hours.
Tested with a new unit test and by running on the main network with -debug=partitioncheck
Run test/test_bitcoin --log_level=message to see the alert messages:
WARNING: check your network connection, 3 blocks received in the last 4 hours (24 expected)
WARNING: abnormally high number of blocks generated, 60 blocks received in the last 4 hours (24 expected)
The -debug=partitioncheck debug.log messages look like:
ThreadPartitionCheck : Found 22 blocks in the last 4 hours
ThreadPartitionCheck : likelihood: 0.0777702
Instead of only checking height to decide whether to disable script checks,
actually check whether a block is an ancestor of a checkpoint, up to which
headers have been validated. This means that we don't have to prevent
accepting a side branch anymore - it will be safe, just less fast to
do.
We still need to prevent being fed a multitude of low-difficulty headers
filling up our memory. The mechanism for that is unchanged for now: once
a checkpoint is reached with headers, no headers chain branching off before
that point are allowed anymore.
This class groups transactions that have been confirmed in blocks into buckets, based on either their fee or their priority. Then for each bucket, the class calculates what percentage of the transactions were confirmed within various numbers of blocks. It does this by keeping an exponentially decaying moving history for each bucket and confirm block count of the percentage of transactions in that bucket that were confirmed within that number of blocks.
-Eliminate txs which didn't have all inputs available at entry from fee/pri calcs
-Add dynamic breakpoints and tracking of confirmation delays in mempool transactions
-Remove old CMinerPolicyEstimator and CBlockAverage code
-New smartfees.py
-Pass a flag to the estimation code, using IsInitialBlockDownload as a proxy for when we are still catching up and we shouldn't be counting how many blocks it takes for transactions to be included.
-Add a policyestimator unit test
a8cdaf5 checkpoints: move the checkpoints enable boolean into main (Cory Fields)
11982d3 checkpoints: Decouple checkpoints from Params (Cory Fields)
6996823 checkpoints: make checkpoints a member of CChainParams (Cory Fields)
9f13a10 checkpoints: store mapCheckpoints in CCheckpointData rather than a pointer (Cory Fields)
libsecp256k1's API changed, so update key.cpp to use it.
Libsecp256k1 now has explicit context objects, which makes it completely thread-safe.
In turn, keep an explicit context object in key.cpp, which is explicitly initialized
destroyed. This is not really pretty now, but it's more efficient than the static
initialized object in key.cpp (which made for example bitcoin-tx slow, as for most of
its calls, libsecp256k1 wasn't actually needed).
This also brings in the new blinding support in libsecp256k1. By passing in a random
seed, temporary variables during the elliptic curve computations are altered, in such
a way that if an attacker does not know the blind, observing the internal operations
leaks less information about the keys used. This was implemented by Greg Maxwell.
For when you need to keep track of the last N items
you've seen, and can tolerate some false-positives.
Rebased-by: Pieter Wuille <pieter.wuille@gmail.com>
This commit adds several tests to the script_invalid.json data which
exercise some edge conditions that are not currently being tested.
These are mainly being added to cover several cases a branch coverage
analysis of btcd showed are not already being covered, but given more
tests of edge conditions are always a good thing, I'm contributing
them upstream.
The test which is intended to prove that the script engine is properly
rejecting non-minimally encoded PUSHDATA4 data is using the wrong
opcode and value. The test is using 0x4f, which is OP_1NEGATE instead
of the desired 0x4e, which is OP_PUSHDATA4. Further, the push of data
is intended to be 256 bytes, but the value the test is using is
0x00100000 (4096), instead of the desired 0x00010000 (256).
This commit fixes both issues.
This was found while examining the branch coverage in btcd against only
these tests to help find missing branch coverage.
437ada3 Switch test case signing to RFC6979 extra entropy (Pieter Wuille)
9d09322 Squashed 'src/secp256k1/' changes from 50cc6ab..1897b8e (Pieter Wuille)
The environment is prepared by the main thread to guard against invalid locale settings and to prevent deinitialization issues of Boost path, which can result in app crashes.
This adds a -checkblockindex (defaulting to true for regtest), which occasionally
does a full consistency check for mapBlockIndex, setBlockIndexCandidates, chainActive, and
mapBlocksUnlinked.
This fixes a subtle bug involving block re-orgs and non-standard transactions.
Start with a block containing a non-standard transaction, and
one or more transactions spending it in the memory pool.
Then re-org away from that block to another chain that does
not contain the non-standard transaction.
Result before this fix: the dependent transactions get stuck
in the mempool without their parent, putting the mempool
in an inconsistent state.
Tested with a new unit test.
Make sure that chainparams and logging is properly initialized. Doing
this for every test may be overkill, but this initialization is so
simple that that does not matter.
This should fix the travis issues.
UNITTEST parameter are not used by any current tests, and the model
(modifyable parameters) is inconvenient when unit-testing. As
they are stored in a global structure eevery test
would have to (re)set up its own parameters.
For consistency it is also better to test with MAIN parameters.
Split GetNextWorkRequired() into two functions to allow the difficulty calculations to
be tested without requiring a full blockchain.
Add unit tests to cover basic difficulty calculation, plus each of the min/max actual
time, and maximum difficulty target conditions.
The fix to NegateSignatureS caused a test which had been failing
in IsValidSignatureEncoding to then fail in IsLowDERSignature.
Add new test so the original check remains exercised.
NegateSignatureS is called with a signature without a hashtype, so
do not save the last byte and append it after S negation.
Updates the two tests which were affected by this bug.
Makes it possible to compactly provide a delibrately invalid signature
for use with CHECK(MULTI)SIG. For instance with BIP19 if m != n invalid
signatures need to be provided in the scriptSig; prior to this change
those invalid signatures would need to be large DER-encoded signatures.
Note that we may want to further expand on this change in the future by
saying that only OP_0 is a "valid" invalid signature; BIP19 even with
this change is inherently malleable as the invalid signatures can be any
validly encoded DER signature.
on rare occasions, rand() was returning duped values, causing duplicate
transactions.
BuildMerkleTree happily used these, but CPartialMerkleTree caught them and
returned a null merkle root.
Rather than taking changes with rand(), use the loop counter to guarantee
unique values.
At sipa's request, also remove the remaining uses of rand().
856e862 namespace: drop most boost namespaces and a few header cleanups (Cory Fields)
9b1ab86 namespace: drop boost::assign altogether here (Cory Fields)
a324199 namespace: remove boost namespace pollution (Cory Fields)
Remove initialization from vector (as this is only used in the tests).
Also implement SetHex and GetHex in terms of uint256, to avoid
duplicate code as well as avoid endianness issues (as they
work in term of bytes).
- Methods that access the guts of arith_uint256 are removed,
as these are incompatible between endians. Use uint256 instead
- Serialization is no longer needed as arith_uint256's are never
read or written
- GetHash is never used on arith_uint256
If uint256() constructor takes a string, uint256(0) will become
dangerous when uint256 does not take integers anymore (it will go
through std::string(const char*) making a NULL string, and the explicit
keyword is no help).
SignatureHash and its test function SignatureHashOld
return uint256(1) as a special error signaling value.
Return a local static constant with the same value instead.
This is a check that is mentioned in BIP 37, but never implemented in the
reference code. As Bitcoin Core so far never decodes partial merkle trees,
this is not a problem. But perhaps others use the code as a reference.
OP_CODESEPARATOR is an actual executed instruction, not a declarative
thing, so if it's wrapped in an OP_IF it can be turned off.
Using this to implement Rivest's Paywords is left as an exercise for the
reader.
Although script_valid.json and script_invalid.json are loaded correctly by the
JSON interpreter used by bitcoin core, these same files are often used by other
libraries and do not necessarily load correctly due to the fact that newlines
contained inside strings are not valid and must instead use the escape
character \n. The files tx_valid.json and tx_invalid.json handle this
correctly, so I've changed the formatting in script_valid.json and
script_invalid.json to mirror those files.
Now that signing is deterministic, we can require exact correspondence between the
automatically generated tests and the ones read from JSON. Do this, and update
the tests to those deterministic versions. Note that some flag changes weren't
correctly applied before.
Based on an earlier patch by Peter Todd, though the rules here are different
(P2SH scripts should not have a CLEANSTACK check before the P2SH evaluation).
Add a sanity check to prevent cosmic rays from flipping a bit in the
generated public key, or bugs in the elliptic curve code. This is
simply done by signing a (randomized) message, and verifying the
result.
This turns STRICTENC turn into a softforking-safe change (even though it
is not intended as a consensus rule), and as a result guarantee that using
it for mempool validation only results in consensus-valid transactions in
the mempool.
NOP1 to NOP10 are reserved for future soft-fork upgrades. In the event
of an upgrade such NOPs have *VERIFY behavior, meaning that if their
arguments are not correct the script fails. Discouraging these NOPs by
rejecting transactions containing them from the mempool ensures that
we'll never accept transactions, nor mine blocks, with scripts that are
now invalid according to the majority of hashing power even if we're not
yet upgraded. Previously this wasn't an issue as the IsStandard() rules
didn't allow upgradable NOPs anyway, but 7f3b4e95 relaxed the
IsStandard() rules for P2SH redemptions allowing any redeemScript to be
spent.
We *do* allow upgradable NOPs in scripts so long as they are not
executed. This is harmless as there is no opportunity for the script to
be invalid post-upgrade.
1bea2bb Rename ProcessBlock to ProcessNewBlock to indicate change of behaviour, and document it (Luke Dashjr)
d29a291 Rename RPC_TRANSACTION_* errors to RPC_VERIFY_* and use RPC_VERIFY_ERROR for submitblock (Luke Dashjr)
f877aaa Bugfix: submitblock: Use a temporary CValidationState to determine accurately the outcome of ProcessBlock, now that it no longer does the full block validity check (Luke Dashjr)
24e8896 Add CValidationInterface::BlockChecked notification (Luke Dashjr)
99f41b9 MOVEONLY: core.o -> core/block.o (jtimon)
561e9e9 MOVEONLY: Move script/compressor out of script and put CTxOutCompressor (from core) with it (jtimon)
999a2ab MOVEONLY: separate CTxUndo out of core (jtimon)
4a3587d MOVEONLY: Separate CTransaction and dependencies from core (jtimon)
eda3733 MOVEONLY: Move CFeeRate and Amount constants to amount.o (jtimon)
85c579e script: add a slew of includes all around and drop includes from script.h (Cory Fields)
db8eb54 script: move ToString and ValueString out of the header (Cory Fields)
e9ca428 script: add ToByteVector() for converting anything with begin/end (Cory Fields)
066e2a1 script: move CScriptID to standard.h and add a ctor for creating them from CScripts (Cory Fields)
a873823 CAutoFile: Explicit Get() and remove unused methods (Wladimir J. van der Laan)
fef24ca Add IsNull() to class CAutoFile and remove operator ! (Ruben Dario Ponticeli)
This allows for a reversal of the current behavior.
This:
CScript foo;
CScriptID bar(foo.GetID());
Becomes:
CScript foo;
CScriptID bar(foo);
This way, CScript is no longer dependent on CScriptID or Hash();
* Delete canonical_tests.cpp, and move the tests to script_tests.cpp.
* Split off SCRIPT_VERIFY_DERSIG from SCRIPT_VERIFY_STRICTENC (the BIP62 part of it).
* Change signature STRICTENC/DERSIG semantics to fail the script entirely rather than the CHECKSIG result (softfork safety, and BIP62 requirement).
* Add many autogenerated tests for several odd cases.
* Mention specific BIP62 rules in the script verification flags.
7c70438 Get rid of the dummy CCoinsViewCache constructor arg (Pieter Wuille)
ed27e53 Add coins_tests with a large randomized CCoinViewCache test. (Pieter Wuille)
058b08c Do not keep fully spent but unwritten CCoins entries cached. (Pieter Wuille)
c9d1a81 Get rid of CCoinsView's SetCoins and SetBestBlock. (Pieter Wuille)
f28aec0 Use ModifyCoins instead of mutable GetCoins. (Pieter Wuille)
e790c37 Replace SCRIPT_VERIFY_NOCACHE by flag directly to checker (Pieter Wuille)
5c1e798 Make signature cache optional (Pieter Wuille)
c7829ea Abstract out SignatureChecker (Pieter Wuille)
4705902 Avoid introducing a virtual into CChainParams (Wladimir J. van der Laan)
5e2e7fc Suggested corrections on comments, variable names. Also new test case testing the PoW skip in UNITTEST. (SergioDemianLerner)
a25fd6b Switch testing framework from MAIN to new UNITTEST network (SergioDemianLerner)
Windows needed a few fixups to get the tests running:
1. bitcoin-tx needs a file extension in Windows. Take this opportunity to
add an env file, which pulls variables out of our build config. This can
be extended as needed, for now it's very simple.
2. After #1, split the args out of the exec key in the test data.
3. Correct the line-endings from windows stdout
93e24dd travis: use debug for one build (Cory Fields)
be6d87a script: don't read past the end (Cory Fields)
a94496f tests: don't split an empty string (Cory Fields)
00522cd depends: disable reduced exports for debug builds (Cory Fields)
1f7fff2 depends: add docs for debug (Cory Fields)
dc66ff5 depends: make LDFLAGS act like the other flags (Cory Fields)
b1efba8 depends: give miniupnpc cppflags (Cory Fields)
1d154db depends: teach qt to honor debug/release (Cory Fields)
3b63df5 depends: boost: build for debug or release as requested (Cory Fields)
7e99df7 depends: make sure openssl sees cppflags (Cory Fields)
f397304 depends: add debug/release flags for linux/osx/win (Cory Fields)
2027ad3 depends: add the debug/release concept to depends (Cory Fields)
All direct modifications are now done through ModifyCoins, and BatchWrite is
used for pushing batches of queued modifications up, so we don't need the
low-level SetCoins and SetBestBlock anymore in the top-level CCoinsView class.