Pulls in the following new languages:
- `af` Afrikaans
- `es_419` Spanish (Latin America)
- `es_AR` Spanish (Argentina)
- `es_CO` Spanish (Colombia)
- `fil` Filipino
- `it_IT` Italian (Italy)
- `ro` Romanian
- `sr@latin` Serbian (Latin)
- `ta` Tamil
- `uz@Latn` Uzbek (Latin)
- `zh_HK` Chinese (Hong Kong)
In the Receive 'Tab' of the QT wallet, when 'Show'ing a previously requested payment, add a label underneath the QR Code showing the bitcoin address where the funds will go to.
This way the user can be sure that the QR code scanner app the user using is reading the correct bitcoin address, preventing funds to be stolen.
Includes fix for HiDPI screens by @jonasschnelli.
b4d24e1 Report reindexing progress in GUI (Pieter Wuille)
d3d7547 Add -reindex-chainstate that does not rebuild block index (Pieter Wuille)
fb8fad1 Optimize ActivateBestChain for long chains (Pieter Wuille)
316623f Switch reindexing to AcceptBlock in-loop and ActivateBestChain afterwards (Pieter Wuille)
d253ec4 Make ProcessNewBlock dbp const and update comment (Pieter Wuille)
5d5e7a0 net: No need to export ConnectNode (Cory Fields)
e9ed620 net: No need to export DumpBanlist (Cory Fields)
8b8f877 net: make Ban/Unban/ClearBan functionality consistent (Cory Fields)
cca221f net: Drop CNodeRef for AttemptToEvictConnection (Cory Fields)
563f375 net: use the exposed GetNodeSignals() rather than g_signals directly (Cory Fields)
9faa490 net: remove unused set (Cory Fields)
52cbce2 net: don't import std namespace (Cory Fields)
My changes leave all tray icon and menu creation/initialization logic
untouched. It only shows or hides the icon according to the setting.
A new checkbox was added to the OptionsDialog under the Window tab. A
bool option named "hideTrayIcon" was added to OptionsModel. This
checkbox was mapped like other all options to the OptionsModel.
A signal was added to the OptionsModel for broadcasting changes the the
hideTrayIcon option. This signal was connected to a new slot added to
BitcoinGUI named setTrayIconVisible(bool). The slot simply hides or
shows the trayIcon in BitcoinGUI according to the parameter recieved.
- Ban/Unban/ClearBan call uiInterface.BannedListChanged() as necessary
- Ban/Unban/ClearBan sync to disk if the operation is user-invoked
- Mark node for disconnection automatically when banning
- Lock cs_vNodes while setting disconnected
- Don't spin in a tight loop while setting disconnected
I made a subclass of QMessageBox that disables the send button in
exec() and starts a timer that calls a slot to re-enable it after a
configurable delay.
It also has a countdown in the send/yes button while it is disabled
to hint to the user why the send button is disabled (and that it is
actually supposed to be disabled).
A small GUI annoyance for me has always been that it's impossible to
have multiple transaction detail windows open, for example to compare
transactions.
This patch makes the window non-modal so that it is possible to open
transaction details at will.
The build date does only makes sense for custom/self-compiled bitcoin-core versions because we are using static build-dates for our deterministic release builds.
Having a quick option to get the current datadir is much more valuable for debug purposes.
While trying to find a black/white version of the Bitcoin
logo for the organization I noticed the about.png is not
entirely black - it has some reflection. Remove this to make
it the same as other icons.
Also ran the icons through `contrib/devtools/optimize-pngs.py`,
so `chevron.png` was optimized too.
43abb02 [Qt] Add a new chevron/arrow icon for the console prompt line (Jonas Schnelli)
56c9e66 [Qt] keep scroll position in GUI console after changing font size (Jonas Schnelli)
3a3a927 [Qt] Add option to increase/decrease font size in the console window (Jonas Schnelli)
- Add new translations (finally, after a long time)
- update-translation script was not considering new translations - oops
- fixed this, also remove (nearly) empty translations
- Update translation process, it was still describing the old repository
structure
But keep translating them in the GUI.
This - necessarily - requires duplication of a few messages.
Alternative take on #7134, that keeps the translations from being wiped.
Also document GetWarnings() input argument.
Fixes#5895.
9af5f9c Move uiInterface.NotifyBlockTip signal above the core/wallet signal - This will keep getbestblockhash more in sync with blocknotify callbacks (Jonas Schnelli)
4082e46 [Qt] call GuessVerificationProgress synchronous during core signal, pass double over UI signal (Jonas Schnelli)
947d20b [Qt] reduce cs_main in getVerificationProgress() (Jonas Schnelli)
e6d50fc [Qt] update block tip (height and date) without locking cs_main, update always (each block) (Jonas Schnelli)
012fc91 NotifyBlockTip signal: switch from hash (uint256) to CBlockIndex* - also adds a boolean for indication if the tip update was happening during initial sync - emit notification also during initial sync (Jonas Schnelli)
a46f87f Initialize logging before we do parameter interaction (Jonas Schnelli)
df66147 Move -blocksonly parameter interaction to the new ParameterInteraction() function (Jonas Schnelli)
68354e7 [QT] Call inits parameter interaction before we create the options model (Jonas Schnelli)
411b05a Refactor parameter interaction, call it before AppInit2() (Jonas Schnelli)
6342a48 Init: Use DEFAULT_TRANSACTION_MINFEE in help message (MarcoFalke)
a9c73a1 [wallet] Add comments for doxygen (MarcoFalke)
6b0e622 [wallet] Refactor to use new MIN_CHANGE (MarcoFalke)
* Introduce new constant MIN_CHANGE and use it instead of the
hardcoded "CENT"
* Add test case for MIN_CHANGE
* Introduce new constant for -mintxfee default:
DEFAULT_TRANSACTION_MINFEE = 1000
* Raise the debug window when hidden behind other windows
* Switch to the debug window when on another virtual desktop
* Show the debug window when minimized
This change is a conceptual copy of 5ffaaba and 382e9e2
7aac6db [QT] dump banlist to disk in case of ban/unban over QT (Jonas Schnelli)
7f90ea7 [QA] adabt QT_NO_KEYWORDS for QT ban implementation (Jonas Schnelli)
07f70b2 [QA] fix netbase tests because of new CSubNet::ToString() output (Jonas Schnelli)
4ed0510 [Qt] call DumpBanlist() when baning unbaning nodes (Philip Kaufmann)
be89292 [Qt] reenabling hotkeys for ban context menu, use different words (Jonas Schnelli)
b1189cf [Qt] adapt QT ban option to banlist.dat changes (Jonas Schnelli)
65abe91 [Qt] add sorting for bantable (Philip Kaufmann)
51654de [Qt] bantable polish (Philip Kaufmann)
cdd72cd [Qt] simplify ban list signal handling (Philip Kaufmann)
43c1f5b [Qt] remove unused timer-code from banlistmodel.cpp (Jonas Schnelli)
e2b8028 net: Fix CIDR notation in ToString() (Wladimir J. van der Laan)
9e521c1 [Qt] polish ban table (Philip Kaufmann)
607809f net: use CIDR notation in CSubNet::ToString() (Jonas Schnelli)
53caec6 [Qt] bantable overhaul (Jonas Schnelli)
f0bcbc4 [Qt] bantable fix timestamp 64bit issue (Jonas Schnelli)
6135309 [Qt] banlist, UI optimizing and better signal handling (Jonas Schnelli)
770ca79 [Qt] add context menu with unban option to ban table (Jonas Schnelli)
5f42132 [Qt] add ui signal for banlist changes (Jonas Schnelli)
ad204df [Qt] add banlist table below peers table (Jonas Schnelli)
50f0908 [Qt] add ban functions to peers window (Jonas Schnelli)
The thin space QT html hack results in cut-off chars/nums after a line break.
Avoid word wrap line breaks by using a smaller font and a line break before each alternative value)
- add missing NULL pointer checks
- add better comments and reorder some code in rpcconsole.cpp
- remove unneeded leftovers in bantable.cpp
- update bantable column sizes to prevent cutting of banned until
- remove banListChanged signal from client model
- directly call clientModel->getBanTableModel()->refresh() without the way
over clientModel->updateBanlist()
- also fix clearing peer detail window, when selecting (clicking)
peers in the ban list
Implement RPCTimerHandler for Qt RPC console, so that `walletpassphrase`
works with GUI and `-server=0`.
Also simplify HTTPEvent-related code by using boost::function directly.
- *Replace usage of boost::asio with [libevent2](http://libevent.org/)*.
boost::asio is not part of C++11, so unlike other boost there is no
forwards-compatibility reason to stick with it. Together with #4738 (convert
json_spirit to UniValue), this rids Bitcoin Core of the worst offenders with
regard to compile-time slowness.
- *Replace spit-and-duct-tape http server with evhttp*. Front-end http handling
is handled by libevent, a work queue (with configurable depth and parallelism)
is used to handle application requests.
- *Wrap HTTP request in C++ class*; this makes the application code mostly
HTTP-server-neutral
- *Refactor RPC to move all http-specific code to a separate file*.
Theoreticaly this can allow building without HTTP server but with another RPC
backend, e.g. Qt's debug console (currently not implemented) or future RPC
mechanisms people may want to use.
- *HTTP dispatch mechanism*; services (e.g., RPC, REST) register which URL
paths they want to handle.
By using a proven, high-performance asynchronous networking library (also used
by Tor) and HTTP server, problems such as #5674, #5655, #344 should be avoided.
What works? bitcoind, bitcoin-cli, bitcoin-qt. Unit tests and RPC/REST tests
pass. The aim for now is everything but SSL support.
Configuration options:
- `-rpcthreads`: repurposed as "number of work handler threads". Still
defaults to 4.
- `-rpcworkqueue`: maximum depth of work queue. When this is reached, new
requests will return a 500 Internal Error.
- `-rpctimeout`: inactivity time, in seconds, after which to disconnect a
client.
- `-debug=http`: low-level http activity logging
d042854 SQUASH "Implement watchonly support in fundrawtransaction" (Matt Corallo)
428a898 SQUASH "Add have-pubkey distinction to ISMINE flags" (Matt Corallo)
6bdb474 Implement watchonly support in fundrawtransaction (Matt Corallo)
f5813bd Add logic to track pubkeys as watch-only, not just scripts (Matt Corallo)
d3354c5 Add have-pubkey distinction to ISMINE flags (Matt Corallo)
5c17059 Update importaddress help to push its use to script-only (Matt Corallo)
a1d7df3 Add importpubkey method to import a watch-only pubkey (Matt Corallo)
907a425 Add p2sh option to importaddress to import redeemScripts (Matt Corallo)
983d2d9 Split up importaddress into helper functions (Matt Corallo)
cfc3dd3 Also remove pay-2-pubkey from watch when adding a priv key (Matt Corallo)
- add static verifySize() function to PaymentServer and move the logging
on error into the function
- also use the new function in the unit test
- the function checks if the size is allowed as per BIP70
- remove an unneeded include of net.h in peertablemodel.cpp
- add const after size() in PeerTablePriv
- remove 2x unneeded else in functions
- replace a (int) typecast by (QVariant) to use Qt style
- remove unneeded include of peertablemodel.h from rpcconsole.cpp
Introduce a PlatformStyle to handle platform-specific customization of
the UI.
This replaces 'scicon', as well as #ifdefs to determine whether to place
icons on buttons.
The selected PlatformStyle defaults to the platform that the application
was compiled on, but can be overridden from the command line with
`-uiplatform=<x>`.
Also fixes the warning from #6328.
This indicates that, eg, we have a public key for a key which may
be used as a pay-to-pubkey-hash. It generally means that we can
create a valid scriptSig except for missing private key(s) with
which to create signatures.
QT_NO_KEYWORDS prevents Qt from defining the `foreach`, `signals`,
`slots` and `emit` macros.
Avoid overlap between Qt macros and boost - for example #undef hackiness
in #6421.
To determine the default for `-par`, the number of script verification
threads, use [boost:🧵:physical_concurrency()](http://www.boost.org/doc/libs/1_58_0/doc/html/thread/thread_management.html#thread.thread_management.thread.physical_concurrency)
which counts only physical cores, not virtual cores.
Virtual cores are roughly a set of cached registers to avoid context
switches while threading, they cannot actually perform work, so spawning
a verification thread for them could even reduce efficiency and will put
undue load on the system.
Should fix issue #6358, as well as some other reported system overload
issues, especially on Intel processors.
The function was only introduced in boost 1.56, so provide a utility
function `GetNumCores` to fall back for older Boost versions.
- implement find_value() function for UniValue
- replace all Array/Value/Object types with UniValues, remove JSON Spirit to UniValue wrapper
- remove JSON Spirit sources
Previously due to an off-by-one error the wallet ignored
nLockTime-by-height transactions that would be valid in the next block
even though they are accepted into the mempool. The transactions
wouldn't show up until confirmed, nor would they be included in the
unconfirmed balance. Similar to the mempool behavior fix in 665bdd3b,
the wallet code was calling IsFinalTx() directly without taking into
account the fact that doing so tells you if the transaction could have
been mined in the *current* block, rather than the next block.
To fix this we strip IsFinalTx() of non-consensus-critical
functionality, removing the default arguments, and add CheckFinalTx() to
check if a transaction will be final in the next block.
ca5f688 [QT] don't colorize icons on win and mac (Jonas Schnelli)
7247d10 [QT] use alert icon with tooltip insted of "(out of sync)" text (Jonas Schnelli)
51c7c70 [QT] remove frame to avoid double-frame situation in sendcoinsentry.ui (Jonas Schnelli)
2a6b844 [QT] change transaction amount and height in overview page (Jonas Schnelli)
a8cdaf5 checkpoints: move the checkpoints enable boolean into main (Cory Fields)
11982d3 checkpoints: Decouple checkpoints from Params (Cory Fields)
6996823 checkpoints: make checkpoints a member of CChainParams (Cory Fields)
9f13a10 checkpoints: store mapCheckpoints in CCheckpointData rather than a pointer (Cory Fields)
- write "Bitcoins" uppercase
- replace secure/insecure for payment requests with
authenticated/unauthenticated
- change a translatable string for payment request expiry to match another
existing string to only get ONE resulting string to translate
According to Tor's extensions to the SOCKS protocol
(https://gitweb.torproject.org/torspec.git/tree/socks-extensions.txt)
it is possible to perform stream isolation by providing authentication
to the proxy. Each set of credentials will create a new circuit,
which makes it harder to correlate connections.
This patch adds an option, `-proxyrandomize` (on by default) that randomizes
credentials for every outgoing connection, thus creating a new circuit.
2015-03-16 15:29:59 SOCKS5 Sending proxy authentication 3842137544:3256031132
Before and after was tested in Windows:
before:
GUI: ReportInvalidCertificate : Payment server found
an invalid certificate: ("Microsoft Authenticode(tm) Root Authority")
GUI: ReportInvalidCertificate : Payment server found
an invalid certificate: ()
GUI: ReportInvalidCertificate : Payment server found
an invalid certificate: ()
GUI: ReportInvalidCertificate : Payment server found
an invalid certificate: ()
after:
GUI: ReportInvalidCertificate: Payment server found an
invalid certificate: "01" ("Microsoft Authenticode(tm) Root Authority")
() ()
GUI: ReportInvalidCertificate: Payment server found an
invalid certificate: "01" () () ("Copyright (c) 1997 Microsoft Corp.",
"Microsoft Time Stamping Service Root", "Microsoft Corporation")
GUI: ReportInvalidCertificate: Payment server found an
invalid certificate: "4a:19:d2:38:8c:82:59:1c:a5:5d:73:5f:15:5d:dc:a3" ()
() ("NO LIABILITY ACCEPTED, (c)97 VeriSign, Inc.", "VeriSign Time Stamping
Service Root", "VeriSign, Inc.")
GUI: ReportInvalidCertificate: Payment server found an
invalid certificate: "e4:9e:fd:f3:3a:e8:0e:cf:a5:11:3e:19:a4:24:02:32" ()
() ("Class 3 Public Primary Certification Authority")
721cb55 GUI: Display label rather than address on popups (Luke Dashjr)
e96028c GUI: Clarify terminology; use "Label" heading for labels row, and "Node/Service" rather than [IP] "Address" (Luke Dashjr)
5983a4e Add a NODE_GETUTXO service bit and document NODE_NETWORK. Stop translating the NODE_* names as they are technical and cannot be translated. (Mike Hearn)
1d9b378 qa/rpc-tests/wallet: Tests for sendmany (Luke Dashjr)
40a7573 rpcwallet/sendmany: Just take an array of addresses to subtract fees from, rather than an Object with all values being identical (Luke Dashjr)
292623a Subtract fee from amount (Cozz Lovan)
90a43c1 [Qt] Code-movement-only: Format confirmation message in sendcoinsdialog (Cozz Lovan)
. Closes the bug from commit e179eb3d9b
("bitcoin-qt -help" did not show any message)
. Move all the options in init.cpp (there were already some
options related to bitcoin-qt)
6cb4a52 [Qt, Linux] honor current network when creating autostart link (Philip Kaufmann)
9673c35 [Qt, Win] honor current network when creating autostart link (Philip Kaufmann)
These dialogs will be something that people occasionally open, not keep
open during their session, so just popping it up in a sensible place
is good enough. Remembering only creates potential issues, like spawning
it outside the current screen area.
On Ubuntu this causes the dialogs to be positioned in the
middle of the main dialog, so I didn't add code for that. YMMV.
Inspired by github pull #5777 by @L-Cranston-Shadow
This makes it easier for us to replace it if desired, since it's now only in
one spot. Also, it avoids the openssl include from allocators.h, which
essentially forced openssl to be included from every compilation unit.
Bitcoin amounts are stored as uint64 in the protobuf messages (see
paymentrequest.proto), but CAmount is defined as int64_t. Because
of that we need to verify that single and accumulated amounts are
in a valid range and no variable overflow has happened.
- fixes#5624 (#5622)
Thanks @SergioDemianLerner for reporting that issue and also supplying us
with a possible solution.
- add static verifyAmount() function to PaymentServer and move the logging
on error into the function
- also add a unit test to paymentservertests.cpp
Note that this will also require translation changes in Transifex for the key
"A fee higher than %1 is considered an insanely high fee." which is now
"A fee higher than %1 is considered an absurdly high fee."
Signed-off-by: Daira Hopwood <daira@jacaranda.org>
The default font changed again.
The real fix is to compile qt against a >= 10.8 sdk, but this is simple enough
to backport to 0.10 to avoid having to do that there.
Note: NSAppKitVersionNumber is a double and there's no official value for
NSAppKitVersionNumber10_10. Since == isn't reliable for doubles, use Apple's
guidelines for testing versions here:
https://developer.apple.com/library/mac/releasenotes/AppKit/RN-AppKit/
Chinese and Japanese fonts have been hard-coded as well, otherwise they fail to
show up at all.
- now logs if -rootcertificates="" was used to disable payment request
authentication via X.509 certificates
- also logs which file is used as trusted root cert, if -rootcertificates
is set
- this is based on #4122 (which can be closed)
Currently a payment request is only checked for expiration upon receipt.
It should be checked again immediately before sending coins to prevent
the user from paying to an expired invoice which would then require a
customer service interaction.
- add static verifyExpired() function to PaymentServer to be able to use
the same validation code in GUI and unit-testing code
- extend unit tests to use that function and also add an unit test which
overflows, because payment requests allow expires as uint64, whereas we
use int64_t for verification of expired payment requests
- verify that payment request network matches client network
- add static verifyNetwork() function to PaymentServer to be able to use
the same validation code in GUI and unit-testing code
- add a second PaymentRequest Test CA certificate to paymentrequestdata.h
(serial number f0:da:97:e4:38:d7:64:16) as caCert2_BASE64
- rename existing Test CA certificate to caCert1_BASE64
- rename existing payment request data to know they belong to
caCert1_BASE64
- update comments to reflect the changes and add a missing comment to one
of the payment requests
b468e81 Qt: Clarify sign/verify dialog text to specifically state that these messages only prove one receives with the address in question, and makes no claim to sender of transactions (Luke Dashjr)
- it is helpful to be able to test and verify payment request processing
by allowing self signed root certificates (e.g. generated by Gavins
"certificate authority in a box")
- This option is just shown in the UI options, if -help-debug is enabled.
- before it was possible to use the steps to change e.g. amouns of
authenticated or unauthenticated payment requests (AmountSpinBox is
already set to read-only here) - this is now fixed
- also move the reimplemented stepEnabled() function to the
protected section of our class, where it belongs (see Qt doc)
856e862 namespace: drop most boost namespaces and a few header cleanups (Cory Fields)
9b1ab86 namespace: drop boost::assign altogether here (Cory Fields)
a324199 namespace: remove boost namespace pollution (Cory Fields)
Instead of using a fixed-width font in a label, which virtually
guarentees a horizontal scrollbar, use a proper text-document
that can re-layout based on user input.
If uint256() constructor takes a string, uint256(0) will become
dangerous when uint256 does not take integers anymore (it will go
through std::string(const char*) making a NULL string, and the explicit
keyword is no help).
4709160 [Qt] fix a translation that occurs 2 times but was a little different (Philip Kaufmann)
50db7d9 [Qt] change some strings to reflect name change to Bitcoin Core (Philip Kaufmann)
2747f7c [Qt] fix missing plural form for a string in sendcoinsdialog (Philip Kaufmann)
- current code only does this for payment request files, which are
used on Mac
- also rename readPaymentRequest to readPaymentRequestFromFile, so it's
obvious that function only handles payment request files and not URIs
- small logging changes in readPaymentRequestFromFile
- add newly added variables to the constructor init
- move an already existing bool also to constructor init
- move a connect call to setClientModel and add a NULL pointer check
4574248 [Qt] minor ordering cleanup after new fee selection (Philip Kaufmann)
a01fa30 minor style cleanup after HTTP rest interface merge (Philip Kaufmann)
Currently Bitcoin-Qts support for OSX User Notification Center is broken. This pull will fix a known issue of non-official-apple-built apps having problems sending user notifications.
- guard 4 connect calls by an #ifdef when no wallet is loaded to fix "No
such slot" warnings
- also add comments when #ifdef ENABLE_WALLET end
- fixes#5175
Move transaction new/update notification to TransactionTableModel.
This moves the concerns to where they're actually handled.
No need to bounce this through wallet model.
- Do wallet transaction preprocessing on signal handler side;
avoids locking cs_main/cs_wallet on notification in GUI thread
(except for new transactions)
85c579e script: add a slew of includes all around and drop includes from script.h (Cory Fields)
db8eb54 script: move ToString and ValueString out of the header (Cory Fields)
e9ca428 script: add ToByteVector() for converting anything with begin/end (Cory Fields)
066e2a1 script: move CScriptID to standard.h and add a ctor for creating them from CScripts (Cory Fields)
d4746d5 Add a SECURE style flag for ThreadSafeMessageBox, which indicates that the message contains sensitive information. This keeps the message from being output to the debug log by bitcoind. Fixes a possible security risk when starting bitcoind in server mode without the 'rpcpassword' option configured, resulting in the "suggested" password being output to the debug log. (Mark Friedenbach)
Many changes:
* Do not use 'getblocks', but 'getheaders', and use it to build a headers tree.
* Blocks are fetched in parallel from all available outbound peers, using a
limited moving window. When one peer stalls the movement of the window, it is
disconnected.
* No more orphan blocks. At all. We only ever request a block for which we have
verified the headers, and store it to disk immediately. This means that a
disk-fill attack would require PoW.
* Require protocol version 31800 for every peer (released in december 2010).
* No more syncnode (we sync from everyone we can, though limited to 1 during
initial *headers* sync).
* Introduce some extra named constants, comments and asserts.
6fd546d Remove CChainParams::NetworkID() (jtimon)
cc97210 Add fTestnetToBeDeprecatedFieldRPC to CChainParams (jtimon)
e11712d Move checkpoint data selection to chainparams (jtimon)
6de50c3 qt: add network-specific style object (Wladimir J. van der Laan)
Mainly cleanups: Gets rid of isTestNet everywhere, by keeping track
of network-specific theming in a central place.
Also makes GUI no longer dependent on the network ID enumeration, which
alleviates concerns about #4802.
It's strange to be able to close these windows while there is work
in progress.
Also set Qt::WA_DeleteOnClose on both windows to make sure that they
are deleted eventually, no matter what happens.
bbad683 [Qt] simplify return code and return values in txtablemodel (Philip Kaufmann)
21f1516 [Qt] add all used colors in txtablemodel to guiconstants (Philip Kaufmann)
2c2cc5d Remove some unnecessary c_strs() in logging and the GUI (Philip Kaufmann)
f7d0a86 netbase: Use .data() instead of .c_str() on binary string (Wladimir J. van der Laan)
- also fixes indentation in one file (auto fixed by Qt Designer)
- removes several default parameters, which are not needed in the files
- related to #4840 (but not intended as fix for a no-bug)
1e4f87f Use memcmp for uint256 equality/inequality (Pieter Wuille)
8a41e1e Use boost::unordered_map for mapBlockIndex (Pieter Wuille)
145d5be Introduce BlockMap type for mapBlockIndex (Pieter Wuille)
a0dbe43 checkpoints.cpp depends on main, it can use mapBlockIndex directly (Pieter Wuille)
Thanks to Pieter Wuille for most of the work on this commit.
I did not fixup the overhaul commit, because a rebase conflicted
with "remove fields of ser_streamplaceholder".
I prefer not to risk making a mistake while resolving it.
The implementation of each class' serialization/deserialization is no longer
passed within a macro. The implementation now lies within a template of form:
template <typename T, typename Stream, typename Operation>
inline static size_t SerializationOp(T thisPtr, Stream& s, Operation ser_action, int nType, int nVersion) {
size_t nSerSize = 0;
/* CODE */
return nSerSize;
}
In cases when codepath should depend on whether or not we are just deserializing
(old fGetSize, fWrite, fRead flags) an additional clause can be used:
bool fRead = boost::is_same<Operation, CSerActionUnserialize>();
The IMPLEMENT_SERIALIZE macro will now be a freestanding clause added within
class' body (similiar to Qt's Q_OBJECT) to implement GetSerializeSize,
Serialize and Unserialize. These are now wrappers around
the "SerializationOp" template.
Needed to build breakage reported by Arnavion on IRC:
qt/splashscreen.cpp: In constructor 'SplashScreen::SplashScreen(const QPixmap&, Qt::WindowFlags, bool)':
qt/splashscreen.cpp:33:98: error: 'FormatFullVersion' was not declared in this scope
b197bf3 [Qt] disable tray interactions when client model set to 0 (Philip Kaufmann)
314fbd9 [Qt] use BitcoinGUI::DEFAULT_WALLET constant in bitcoin.cpp (Philip Kaufmann)
8ca6a16 [Qt] ensure all class attributes are init to 0 (Philip Kaufmann)
Split up util.cpp/h into:
- string utilities (hex, base32, base64): no internal dependencies, no dependency on boost (apart from foreach)
- money utilities (parsesmoney, formatmoney)
- time utilities (gettime*, sleep, format date):
- and the rest (logging, argument parsing, config file parsing)
The latter is basically the environment and OS handling,
and is stripped of all utility functions, so we may want to
rename it to something else than util.cpp/h for clarity (Matt suggested
osinterface).
Breaks dependency of sha256.cpp on all the things pulled in by util.
This number was still tracked even though it's shown nowhere in the UI
anymore. It was originally removed because it didn't match the actual number of
records in the view (which contains outputs, not transactions) thus was
confusing people.
- this prevents the ability to fiddle around with the system tray when
already shutting down (e.g. on slow shutdowns because of a proxy delay)
- extends solution for #4360
- ensure normal and watch-only stuff looks consistent
- simplify UI by removing unneeded UI layout elements
- change some comments to watch-only from watchonly
- remove starting height as table header and replace with ping time
- remove columnResizingFixer
- add local address (if available) in detailed node view (on top of the
right view below the remote address)
- remove some .c_str() by using QString::fromStdString()
- rename Address to Address/Hostname
- rename secs to just s for ping time
- use MODEL_UPDATE_DELAY from guiconstants.h for the peer refresh time
- make PeerTableModel::columnCount() return no hard-coded value
- remove and cleanup dup private: section in RPCConsole header
- add new defaults for column sizes
- remove behaviour which keeps disconnected peers selected and also remove
code which keeps track of last selected peer stats
- add sync height to detail view
- add some additional NULL pointer checks for clientModel in
rpcconsole.cpp
Fixes various issues and cleans up code
- Fixes issue #4500: Amount widget +/- has floating point rounding artifacts
- Amount box can now be emptied again, without clearing to 0
Also aligns the amount to the right, as in other places.
7149499 Add comments re BitcoinUnits::formatWithUnit/formatHtmlWithUnit (Roy Badami)
f7d70c6 Remove unused fAlign argument from BitcoinUnits::format and friends (Roy Badami)
2e4fee2 Show bitcoin quantities with full precision, even in the presence of trailing zeros (Roy Badami)
7007402 Implement SI-style (thin space) thoudands separator (Roy Badami)
This is the first part of a huge effort to rework the handling of dependencies.
To start, this change allows all supported platforms to build against a static
Qt. 5.2.1 and 5.3 have been successfully tested against osx64, win32, win64,
linux32, and linux64.
It also makes a small change to the windows config, to allow linking against
qt builds with or without built-in libjpeg/libpng/libpcre/libz.
The actual build processes to take advantage of these changes (for gitian and
pull-tester) are coming soon. Until then, this should be a no-op.
Start the core thread only when needed for initialization
or shutdown.
Avoids a bit of overhead, and also avoids spamming two
log messages before logging is properly initialized.
a3e192a replaced MINE_ with ISMINE_ (JaSK)
53a2148 fixed bug where validateaddress doesn't display information (JaSK)
f28707a fixed bug in ListReceived() (JaSK)
519dd1c Added MINE_ALL = (spendable|watchonly) (JaSK)
23b0506 Fixed some stuff in TransactionDesc (JaSK)
80dda36 removed default argument values for ismine filter (JaSK)
d5087d1 Use script matching rather than destination matching for watch-only. (Pieter Wuille)
0fa2f88 added includedWatchonly argument to listreceivedbyaddress/...account (JaSK)
f87ba3d added includeWatchonly argument to 'gettransaction' because it affects balance calculation (JaSK)
a5c6c5d fixed tiny glitch and improved readability like laanwj suggested (JaSK)
d7d5d23 Added argument to listtransactions and listsinceblock to include watchonly addresses (JaSK)
952877e Showing 'involvesWatchonly' property for transactions returned by 'listtransactions' and 'listsinceblock'. It is only appended when the transaction involves a watchonly address. (JaSK)
83f3543 Added argument to listaccounts to include watchonly addresses (JaSK)
d4640d7 Added argument to getbalance to include watchonly addresses and fixed errors in balance calculation. (JaSK)
d2692f6 Watchonly transactions are marked in transaction history (JaSK)
ffd40da Watchonly balances are shown separately in gui. (JaSK)
2935b21 qt: Hide unspendable outputs in coin control (Wladimir J. van der Laan)
c898846 Add support for watch-only addresses (Pieter Wuille)
The wallet now uses the mempool fee estimator with a new
command-line option: -txconfirmtarget (default: 1) instead
of using hard-coded fees or priorities.
A new bitcoind that hasn't seen enough transactions to estimate
will fall back to the old hard-coded minimum priority or
transaction fee.
-paytxfee option overrides -txconfirmtarget.
Relaying and mining code isn't changed.
For Qt, the coin control dialog now uses priority estimates to
label transaction priority (instead of hard-coded constants);
unspent outputs were consistently labeled with a much higher
priority than is justified by the free transactions actually
being accepted into blocks.
I did not implement any GUI for setting -txconfirmtarget; I would
suggest getting rid of the "Pay transaction fee" GUI and replace
it with either "target number of confirmations" or maybe
a "faster confirmation <--> lower fee" slider or select box.
Changes:
* Add Add/Have WatchOnly methods to CKeyStore, and implementations
in CBasicKeyStore.
* Add similar methods to CWallet, and support entries for it in
CWalletDB.
* Make IsMine in script/wallet return a new enum 'isminetype',
rather than a boolean. This allows distinguishing between
spendable and unspendable coins.
* Add a field fSpendable to COutput (GetAvailableCoins' return type).
* Mark watchonly coins in listunspent as 'watchonly': true.
* Add 'watchonly' to validateaddress, suppressing script/pubkey/...
in this case.
Based on a patch by Eric Lombrozo.
Conflicts:
src/qt/walletmodel.cpp
src/rpcserver.cpp
src/wallet.cpp
Respend transactions that conflict with transactions already in the
wallet are added to it. They are not displayed unless they also involve
the wallet, or get into a block. If they do not involve the wallet,
they continue not to affect balance.
Transactions that involve the wallet, and have conflicting non-equivalent
transactions, are highlighted in red. When the conflict first occurs, a
modal dialog is thrown.
CWallet::SyncMetaData is changed to sync only to equivalent transactions.
When a conflict is added to the wallet, counter nConflictsReceived is
incremented. This acts like a change in active block height for the
purpose of triggering UI updates.
- New status bar control shows the current Unit of Display.
When clicked (left,or right button) it shows a context menu
that allows the user to switch the current Unit of Display (BTC, mBTC, uBTC)
- Recent Requests and Transaction Table headers are now updated when
unit of display is changed, because their "Amount" column now displays the
current unit of display.
- Takes care of issue #3970 Units in transaction export csv file.
- Small refactors for reusability.
- Demo Video https://www.youtube.com/watch?v=wwcr0Yh68go&list=UUG3jF2hgofmLWP0tRPisQAQ
- changes after Diapolo's feedback. Have not been able to build after last pool, issues with boost on MacOSX, will test on Ubuntu these changes.
- removed return statement on switch
- renamed onDisplayUnitsChanged(int) to updateDisplayUnit(int)
- now getAmountColumnTitle(int unit) takes a simple unit parameter. moved to BitcoinUnits.
This commit removes all the unnecessary dependencies (key, core,
netbase, sync, ...) from bitcoin-cli.
To do this it shards the chain parameters into BaseParams, which
contains just the RPC port and data directory (as used by utils and
bitcoin-cli) and Params, with the rest.
bitcoin-config.h moved, but the old file is likely to still exist when
reconfiguring or switching branches. This would've caused files to not rebuild
correctly, and other strange problems.
Make the path explicit so that the old one cannot be found.
Core libs use config/bitcoin-config.h.
Libs (like crypto) which don't want access to bitcoin's headers continue
to use -Iconfig and #include bitcoin-config.h.
Adds a copyright and attribution message to the `-version` output
(the same as shown in the About dialog in the GUI).
Move the message to a function LicenseInfo in init.cpp.
Adds a `-version` or `--version` option to print just the version
of the program for bitcoind, bitcoin-cli and bitcoin-qt.
Also make it that `-help` can be used to display the help (as well as
existing `--help`). Up to now, `-help` was the only option that didn't
work with either one or two dashes.
- add DEFAULT_LISTEN in net.h and use in the code (shared
setting between core and GUI)
Important: This makes it obvious, that we need to re-think the
settings/options handling, as GUI settings are processed before
any parameter-interaction (which is mostly important for network
stuff) in AppInit2()!
The rcc tool is quirky and only honors files in the same directory as the qrc.
When doing an out-of-tree build (as 'make distcheck' does), the generated
translation files end up in a different path, so rcc can't find them.
Split them up so that rcc is run twice: once for static source files and once
for generated files.
f0a83fc Use Params().NetworkID() instead of TestNet() from the payment protocol (jtimon)
2871889 net.h was using std namespace through chainparams.h included in protocol.h (jtimon)
c8c52de Replace virtual methods with static attributes, chainparams.h depends on protocol.h instead of the other way around (jtimon)
a3d946e Get rid of TestNet() (jtimon)
6fc0fa6 Add RPCisTestNet chain parameter (jtimon)
cfeb823 Add RequireStandard chain parameter (jtimon)
21913a9 Add AllowMinDifficultyBlocks chain parameter (jtimon)
d754f34 Move majority constants to chainparams (jtimon)
8d26721 Get rid of RegTest() (jtimon)
cb9bd83 Add DefaultCheckMemPool chain parameter (jtimon)
2595b9a Add DefaultMinerThreads chain parameter (jtimon)
bfa9a1a Add MineBlocksOnDemand chain parameter (jtimon)
1712adb Add MiningRequiresPeers chain parameter (jtimon)
Use CFeeRate instead of an int64_t for quantities that are
fee-per-size.
Helps prevent unit-conversion mismatches between the wallet,
relaying, and mining code.
Made the following links clickable:
http://www.opensource.org/licenses/mit-license.phphttp://www.openssl.org/eay@cryptsoft.com
(Squashed commits into one commit as suggested by @laanwj)
Replaced label with text browser on About Bitcoin Core Screen
So that the links on the About screen can be clickable
Replaced html property with text property
I have now removed unnecessary html so this should make life easier for
translators and you @Diapolo :). What do you think?
The size of the window needs to change
The size of the window needs to change when you make links clickable.
Thanks for pointing that out @laanwj
Using the https://www.openssl.org over the http link
Using the https://www.openssl.org over the http link as suggested by
@Diapolo
Qt5 Removed the qt_mac_set_dock_menu function and left no replacement. It was
later re-added and deprecated for backwards-compatibility.
Qt5.2 adds the non-deprecated QMenu::setAsDockMenu(). Use that when possible.
Pull updated translations from Transifex.
Add mn (Mongolian) language.
Do not update English translation for now as we want to keep
compatibility with 0.9.
- replaces checks in SendCoinsDialog::handlePaymentRequest() that belong
to PaymentServer (normal URIs are special cased, as only an isValid
check is done on BTC addresses)
- prevents the client to handle payment requests that do not match the
clients network and shows an error instead (mainly a problem with
drag&drop payment requests onto the client window)
- includes some small comment changes also
- fixes error from debug.log:
QMetaObject::connectSlotsByName: No matching signal for
on_recentRequestsView_selectionChanged(QItemSelection,QItemSelection)
- small style fixes (e.g. alphabetical ordering if includes etc.)
- fixes#3992
Generally useless information. Only updates on connect time, not after
that. Peers can easily lie and the median filter is not effective in
preventing that.
In the past it was used for progress display in the GUI but
`CheckPoints::guessVerificationProgress` provides a better way that is now used.
It was too easy to mislead it. Peers do lie about it in practice, see issue #4065.
From the RPC, `getpeerinfo` gives the peer raw values, which are more
useful.
Last update (48be9ce) missed quite a lot, for some reason.
This is also the first update done with the new script
`contrib/devtools/update-translations.py`
- In wallet and GUI code LOCK cs_main as well as cs_wallet when
necessary
- In main.cpp SendMessages move the TRY_LOCK(cs_main) up, to encompass the call
to IsInitialBlockDownload.
- Make ActivateBestChain, AddToBlockIndex, IsInitialBlockDownload,
InitBlockIndex acquire the cs_main lock
Fixes#3997
All functions that use ChainActive but do not aquire the cs_main
lock themselves, need to be called with the cs_main lock held.
This commit adds assertions to all externally callable functions
that use chainActive or chainMostWork.
This will flag usages when built with -DDEBUG_LOCKORDER.
- prevents unsafe shutdowns on Windows, which is known to be
able to cause problems with wallet.dat
- if a users ends a Windows session, this will initiate a client shutdown
and show a Windows dialog, that tells the user what is going on (for
Windows Vista and higher it will even show a reason for blocking the
Windows session end)
65adc3a qt: Don't require db_cxx.h when wallet disabled (Wladimir J. van der Laan)
4babd08 doc: Add note about memory reqs for compilation (Wladimir J. van der Laan)
25333a2 build: improve missing boost error reporting (Wladimir J. van der Laan)
- introduce DEFAULT_SCRIPTCHECK_THREADS in main.h
- only show values from -"MAX_HW_THREADS" up to 16 for -par, as it
makes no sense to try to leave more "cores free" than the system
supports anyway
- use the new constant in optionsdialog and remove defaults from
.ui file
Re-submitting this pull request with a single commit.
This patch introduces a GUIUtil class that is used when setting up the 2 tables we have so far on the Qt-GUI.
In the past you could only resize the last column, which has BTC amounts from the right border of the column header, something that was rather unnatural.
If a new table were ever to be added to the interface, fixing the last columns resizing behavior is rather simple. Just look at how we initialize here a TableViewLastColumnResizingFixer object when setting up the table header's behavior, and then how we override the resize event of the component (can be the table, or the dialog) and we invoke columnResizingFixer->stretchColumnWidth(columnIndex);
Autotools defaults to a depth-first recursion which causes the qt tests
to be built before the executables and libraries.
This is inconvenient as make needs to be called twice to make sure the
tests are up to date after changing a source file.
Update the Makefile.am to change this order.
Currently only the name of the option is shown for GUI options
overridden by command line (or configuration file). This commit
adds the value of the options as well, which is useful for
troubleshooting.
Changes for the datadir chooser have made it impossible to specify
the network (testnet/regtest) in the configuration file for the GUI.
Reorganize the initialization sequence to make this possible again.
- Moves the "datadir" QSetting so that is no longer dependent on the
network-specific application name (doing otherwise would create a
chicken-and-egg problem).
- Re-initialize translations after choosing network. There may be a
different language configured in network-specific settings
(slim chance, but handle it for sanity).
Fixes point 1 of #3840.
Last Transifex pull (064a690) introduced a few control characters
into the Korean translation, which sometimes causes the build to fail.
Manually remove these characters for now to get the build working --
they should still be removed at Transifex too.
After the Qt5 switch, status icons were being cut off by 1-2px.
Also fixes some other cases where the UI is slightly off mentioned in #3800.
Fixes#3800.
These days we regard transactions with one confirmation to be
'Confirmed'.
Waiting for 6 confirmations is a recommendation but should not
keep the transaction shown as unconfirmed.
Misc code sanity:
- Merge maturity/status enums, they had become completely disjunct
- 'confirmed' flag is now called 'countsForBalance' for clarity
5770254 Copyright header updates s/2013/2014 on files whose last git commit was done in 2014. contrib/devtools/fix-copyright-headers.py script to be able to perform this maintenance task with ease during the rest of the year, every year. Modifications to contrib/devtools/README.md to document what fix-copyright-headers.py does. (gubatron)
- Exclamation mark icon for conflicted transactions
- Show mouseover status for conflicted transactions as "conflicted"
- Don't show inactive transactions on overview page overview
Extend CMerkleTx::GetDepthInMainChain with the concept of
a "conflicted" transaction-- a transaction generated by the wallet
that is not in the main chain or in the mempool, and, therefore,
will likely never be confirmed.
GetDepthInMainChain() now returns -1 for conflicted transactions
(0 for unconfirmed-but-in-the-mempool, and >1 for confirmed).
This makes getbalance, getbalance '*', and listunspent all agree when there are
mutated transactions in the wallet.
Before:
listunspent: one 49BTC output
getbalance: 96 BTC (change counted twice)
getbalance '*': 46 BTC (spends counted twice)
After: all agree, 49 BTC available to spend.
contrib/devtools/fix-copyright-headers.py script to be able to perform this maintenance task with ease during the rest of the year, every year. Modifications to contrib/devtools/README.md to document what fix-copyright-headers.py does.
Just for completeness. Only a few messages changed or moved since last time.
Don't change any translatable messages until 0.9 final unless really necessary.
- remove btc address length from address validator
- add an optional btc address check in validated line edit that defaults
to off and is used in GUIUtil::setupAddressWidget()
- an isAcceptable() check is added to validated line edit on focus out
which only kicks in, when a validator is used with that widget
- remove an isAcceptable() check from sendcoinsentry.cpp
- remove obsolete attributes from ui files, which are set by calling
GUIUtil::setupAddressWidget()
- move some more things to GUIUtil::setupAddressWidget() and remove them
from normal code e.g. placeholder text
Previously CreateNewBlock() didn't take into account the fact that
IsFinalTx() without any arguments tests if the transaction is considered
final in the *current* block, when both those functions really needed to
know if the transaction would be final in the *next* block.
Additionally the UI had a similar misunderstanding.
Also adds some basic tests to check that CreateNewBlock() is in fact
mining nLockTime-using transactions correctly.
Thanks to Wladimir J. van der Laan for rebase.
After the tinyformat switch sprintf() family functions support passing
actual std::string objects.
Remove unnecessary c_str calls (236 of them) in logging and formatting.
fe14e8d build: Change package name to Bitcoin Core (Wladimir J. van der Laan)
6c980c7 build: Package docs/ and don't package source. (Wladimir J. van der Laan)
39db27c build: Add bitcoin-cli.exe to installer (Wladimir J. van der Laan)
2f87b38 Adapt Windows installer for 64 bit (Wladimir J. van der Laan)
f622232 gitian: Windows 64 bit support (Wladimir J. van der Laan)
- rebuilt some ui file layout to remove unreal values from the files
- remove an unneeded attribute from an ui file
- add / remove some spaces in files
4d90102 [Qt] Add sorting feature to the requested payments table (Cozz Lovan)
8476d5d [Qt] Permanently store requested payments in wallet (Cozz Lovan)
b10e147 wallet: add interface for storing generic data on destinations (Wladimir J. van der Laan)
- adds a nice and well formated dialog, which displays our -? help message
(all options/paramaters)
- moves aboutdialog.cpp/h to the new utilitydialog
- move GUI shutdown window to utilitydialog
Currently it is only possible to use `walletpassphrase` to unlock the
wallet when bitcoin is started in server mode.
Almost everything that manipulates the wallet in the RPC console
needs the wallet to be unlocked and is thus unusable without -server.
This is pretty unintuitive to me, and I'm sure it's even more confusing
to users.
Solve this with a very minimal change: by making the GUI start a
dummy RPC thread just to handle timeouts.
- as a proxy set via GUI can be overridden via -proxy, directly query the
core to get active proxy
- give a warning, if active proxy is not SOCKS5 (needs to be SOCKS5 for
the Qt networking code to work)
- also remove an obsolete connect() call from optionsdialog.cpp and a
reference to Bitcoin-Qt (now just GUI)
Use a series of .png frames for the spinner instead of a .mng.
`mng` is an obscure image format and is not built by default into Qt5.
This appears to improve the crispness of the spinner as well.
Does not noticably increase the size (still ~27k) and the code
is not more complicated either.
There is not much in the GUI to be done without wallet,
though it's possible to change options, watch the sync process,
and use the debug console.
So embed the debug console in the main window.
Stop the shutdown timer from exiting the main loop
when shutdown is already in progress.
Fixes seeming hanging window after typing 'stop' in debug console.
Also hide the debug console during shutdown as it is useless without
a core to connect to.
Remove the need for global references `guiref` and
`splashref` by making the BitcoinGUI and SplashScreen
classes register for the UI interface signals themselves.
Move AppInit2 and Shutdown to a thread.
This allows a more responsive splash screen, prevents 'process does not respond'
messages from the window system and will allow for showing a user friendly
window while shutting down.
Since we're now properly linking against static plugins for qt binaries,
we need to ensure that they're Imported properly.
Without these Imports, the linker drops some of the unused linked libs, causing
undefined symbols in QtCore.
At least Debian/Ubuntu use 'qtchooser' for switching between qt4/qt5 binaries.
It is a wrapper for all qt tools, and calls the named tool of the default
version unless overridden by the -qt= option or QT_SELECT environment variable.
QT_SELECT is set by configure once the qt version has been chosen.
Take for example, moc.
$ which moc
/usr/bin/moc
$ ls -go /usr/bin/moc
lrwxrwxrwx 1 9 Jul 3 21:33 /usr/bin/moc -> qtchooser
$ qtchooser -print-env
QT_SELECT="default"
QTTOOLDIR="/usr/lib/x86_64-linux-gnu/qt4/bin"
QTLIBDIR="/usr/lib/x86_64-linux-gnu"
$ QT_SELECT=qt5 qtchooser -print-env
QT_SELECT="qt5"
QTTOOLDIR="/usr/lib/x86_64-linux-gnu/qt5/bin"
QTLIBDIR="/usr/lib/x86_64-linux-gnu"
$ moc -v
Qt Meta Object Compiler version 63 (Qt 4.8.4)
$ QT_SELECT=qt5 moc -v
Qt Meta Object Compiler version 67 (Qt 5.0.1)
This should be harmless elsewhere.
- remove unused and unmentioned file notsynced.png (we use an animation
for this)
- add missing coincontroldialog.ui to bitcoin-qt.pro
- also unify formating in assets-attribution.md
Update current translations, and add new languages:
- es_MX: Spanish (Mexico)
- pam: Kapampangan
Also update translation process for autoconf-based build system.
- add new options for database cache and script verification threads
- add label which displays options that are overridden by command-line
parameters
- proxy settings are not applied on-the-fly anymore and require a client
restart (ApplyProxySettings() was removed and was not working very well
anyway)
- re-work options reset and require a client shutdown (as it is much
easier to do it this way without having to mess with what can be changed
on-the-fly and what needs a restart anyway)
- options reset now writes default values for every single option
- when changing an option which requires a client restart display a 10
second warning message in statusLabel (via a QTimer)
- when applying the changes via ok change that to a persistent message,
which is displayed even after closing optionsdialog and re-open it, when
no client restart was made
- remove dialog boxes used when changing language or proxy settings
- add setRestartRequired() and isRestartRequired() to OptionsModel and
use the set function when updating options to signal OptionsDialog
when a restart is needed
- resize optionsdialog a little and add some min sizes for certain GUI
elements
- remove apply button from optionsdialog
- save and restore optionsdialog window position
- update nTransactionFee in QSettings with a set -paytxfee value when
opening optionsdialog (I'm not sure about this yet, perhaps revert to
not updating QSettings and just display current -paytxfee value in
optionsdialog.)
Fixes at least #3478.
Splits and documents the phases:
1. Parse command-line options. These take precedence over anything else.
2. Basic Qt initialization (not dependent on parameters or configuration)
3. Application identification
4. Initialization of translations
5. Now that settings and translations are available, ask user for data directory
6. Determine availability of data directory and parse bitcoin.conf
7. URI IPC sending
8. Main GUI initialization
Splits command line parsing logic from ipcSendCommandLine into
ipcParseCommandLine, as isTestNet() can only be overridden in the early
stages before choosing a data directory. Sending however needs to happen
after choosing a data directory.
Pressing <tab> after entering a label now brings the focus to the
address entry, instead of the row of buttons. In my experience this
is more useful, as I usually want to paste an address after
entering the label.
The buttons are mostly useless anyway:
- Choosing a previously used address should be discouraged
- When I'm already using the keyboard the 'paste address' button is
useless - just use the Ctrl-V. Maybe it would be an idea to remove it
completely
- I usually don't want to remove the entry I'm typing now! So makes
sense to have it at the end of the tab chain.
Allow running bitcoind without server.
- Default to -server mode (of course) for bitcoind with SoftSetBoolArg
- Remove fForceServer argument from AppInit2
- Move fDaemon to a static variable in bitcoind
- re-work change address handling so that default is CNoDestination(),
until a verified and known change address was entered (easier code flow)
- add a missing NULL pointer check for adresstablemodel
- add a missing text when opening coin control address selection for
priority and ensure the label is black
- add a missing . at the end of a sentence
c3a7f51 Move `verifymessage` from rpcwallet to rpcmisc (Wladimir J. van der Laan)
723a03d Move `createmultisig` from rpcwallet to rpcmisc (Wladimir J. van der Laan)
452955f Move `validateaddress` from rpcwallet to rpcmisc (Wladimir J. van der Laan)
cd7fa8b Move `nTransactionFee` from main.cpp to wallet.cpp (Wladimir J. van der Laan)
a943bde Move `settxfee` from rpcblockchain to rpcwallet (Wladimir J. van der Laan)
16bc9aa Move `getinfo` from rpcnet to rpcmisc (Wladimir J. van der Laan)
652e156 add new RPC implementation file `rpcmisc.cpp` (Wladimir J. van der Laan)
4a61c39 qt: status WalletModel::Aborted is no longer used (Wladimir J. van der Laan)
ca2c83d Remove unused ThreadSafeAskFee from ui_interface (Wladimir J. van der Laan)
37e67d3 Remove unused ThreadSafeHandleURI from ui_interface (Wladimir J. van der Laan)
When a InitError or InitWarning happens, the
GUI pops up but is unusable (until Init finishes).
This is caused by showNormalIfMinimized. Add a message
flag to skip this call for Init errors or warnings.
ThreadSafeAskFee is effectively unused. It is only called
when the fAskFee parameter on SendMoney or SendMoneyToDestination
is true, which never happens. Remove it.
Only messages for now, executable names and other file names
can be changed later if necessary and safe.
Do not do an all-sweeping change. Some occurences of Bitcoin-Qt need to
be kept:
- Applicationname: this is used to determine the registry entry names,
we don't want to lose settings over a silly name change.
- Where it refers to the executable name instead of the product name.
- cleanup Info.plist.in and specify high DPI mode enable command as per
http://blog.qt.digia.com/blog/2013/04/25/retina-display-support-for-mac-os-ios-and-x11/
- move setting of QApplication::setAttribute() to bitcoin.cpp and add
attribute for enabling use of high DPI pixmaps for Qt >= 5.1
- add missing setWindowTitle() on Mac
- cleanup Mac / non-Mac setup in bitcoingui.cpp
5094f8d Split off rpc_wallet_tests (Wladimir J. van der Laan)
829c920 Move CCryptoKeyStore to crypter.cpp (Wladimir J. van der Laan)
ae6ea5a Update build-unix.md to mention --disable-wallet (Wladimir J. van der Laan)
4f9e993 Add --disable-wallet option to build system (Wladimir J. van der Laan)
d004d72 Move CAddrDB frrom db to net (Wladimir J. van der Laan)
48ba56c Delimit code with #ifdef ENABLE_WALLET (Wladimir J. van der Laan)
991685d Move getinfo to rpcnet.cpp (Wladimir J. van der Laan)
bbb0936 Move HelpExample* from rpcwallet to rpcserver (Wladimir J. van der Laan)
- make eventFilter() private and pass events on to QObject::eventFilter()
instead of just returning false
- re-work paymentservertest.cpp to correctly handle the event test
after the above change (rewrite test_main to allow usage of
QCoreApplication:: in the tests)
- delete socket when we were unable to connect in ipcSendCommandLine()
- show a message to the user if we fail to start-up (instead of just a
debug.log entry)
- misc small comment changes
Use deleteLater() instead of delete, as it is not allowed
to delete widgets directly in an event handler.
Should solve the MacOSX random crashes on send with coincontrol.
Remove unnecessary dependencies for bitcoin-cli
(leveldb, berkelydb, wallet, RPC server)
Build system changes:
- split libbitcoin.a into libbitcoin_common.a, libbitcoin_server.a and
libbitcoin_cli.a
Code changes (movement only):
- split up HelpMessage into HelpMessage in init.cpp and HelpMessageCli
in rpcclient.cpp
- move uiInterface from init.cpp to util.cpp
- remove style sheets from ui files and use Qt attributes instead
- make some more strings untranslatable, to make life for translators
easier
- split up long tooltips an rework the texts a little
- remove monospace labels from sendcoinsdialog also
- use a validated line edit for the change address
- add a tooltip to change address switch
- ensure we have a valid change address in
CoinControlDialog::coinControl->destChange or just CNoDestination()
- some small ui file changes
Split bitcoinrpc up into
- rpcserver: bitcoind RPC server
- rpcclient: bitcoin-cli RPC client
- rpcprotocol: shared common HTTP/JSON-RPC protocol code
One step towards making bitcoin-cli independent from the rest
of the code, and thus a smaller executable that doesn't have to
be linked against leveldb.
This commit only does code movement, there are no functional changes.
- this adds a delete button for insecure and secure payment requests in
the sendcoins dialog
- it also enables the delete button even for single and empty entries, as
this is much easier to handle and doesn't need to special case single
entries
- big parts of the ui file were changed, because I copied the delete
button and had to delete the layout too and created it from scratch
(which seems to cleanup the rows and colums in the layout also, which is
nice IMHO)
Keep a list of requested payments in the Receive tab so that a user can
recall previously created requests after closing their windows.
Currently this list is not stored between bitcoin-qt sessions. This can
be implemented later, but it is not clear where it should be stored as
I don't think it belongs in the wallet (maybe in QSettings?)
- add missing license headers
- make compatible with Qt5
- enforce header cleanup style
- small code style cleanups
- rename Coin Control dialog into Coin Control Address Selection
- use default font for the windows labels (no monospace)
Make users accustomed to the other subdivision units (mBTC, muBTC)
by showing the total amount in all units in the confirmation dialog.
This was recently raised on the mailing list and could be a preparation
for switching over the default unit eventually.
- remove default value for parent variable in dialogs, which should appear
centered over main GUI and pass appropriate value
- add some addition NULL pointer checks
Adds three new languages:
- de_AT: German (Austria)
- gl: Galician
- sl_SI: Slovenian (Slovenia)
Updates many others.
Thanks to the translators contributing on Transifex!
- remove explicit init of netManager as this is done in the constructor
anyway
- move initNetManager() call to uiReady(), which removes an assert() and
allows us to use message() in initNetManager() (currently unused but
could be necessary because of proxy related messages)
- make initNetManager() private
- update paymentservertests.cpp
Use misc methods of avoiding unnecesary header includes.
Replace int typedefs with int##_t from stdint.h.
Replace PRI64[xdu] with PRI[xdu]64 from inttypes.h.
Normalize QT_VERSION ifs where possible.
Resolve some indirect dependencies as direct ones.
Remove extern declarations from .cpp files.
- rework window title to not include Bitcoin - in front, as no other
dialog does this
- favor a connect() call over an own function for clearing the traffic
graph
- write monospace lowercase (seems to be correct after some web search)
and add a comment that we should avoid / remove fixed font sizes
395d0d5 rework an ugly hack in processPaymentRequest() (Philip Kaufmann)
952d2cd make processPaymentRequest() use a single SendCoinsRecipient (Philip Kaufmann)
983cef4 payment-request UI: use SendCoinsRecipient.message for memo (Philip Kaufmann)
c6c97e0 [Qt] Rework of payment request UI (mainly for insecure pr) (Philip Kaufmann)
- this shows insecure (unsecured) payment requests in a new yellowish
colored UI (based on the secure payment request UI) instead of our
normal payment UI
- allows us to receive paymentACK messages for insecure payment requests
- allows us to handle expirations for insecure payment request
- changed walletmodel, so that all types of payment requests don't touch
the addressbook
- add new processSendCoinsReturn() function, which parses the
status of WalletModel::SendCoinsReturn and generates a pair consisting
of a message and message flags
- result is we only need one emit message() call
- this change ensures that the GUI is shown for warnings/errors in
sendcoinsdialog, because of message() taking care of that for modal
messages
- changes 2 warning message into error messages and removed "Error:"
in front of the actual error message string
- re-work -debug help message text
- make -debug log every debugging information again (even all categories)
- remove unneeded fDebug checks in front of LogPrint()/qDebug(), as that
check is done in LogPrintf() when category is != NULL (true for all
LogPrint() calls
- remove fDebug ONLY in code which is NOT performance-critical
- harmonize addrman category name
- deprecate -debugnet usage, should be used via -debug=net and remove the
corresponding global
Use proper signals everywhere.
Removes the need to store a pointer to the BitcoinGUI object in
the walletview.
Also removes the interdependence between setWalletModel / setBitcoinGUI.
- remove 2 unneeded windowTitle attributes, which bloat our translations
- cleanup some unneeded .cpp/.h includes and class usages
- use a more generic string for clearing sendcoinsdialog and
requestpaymentdialog
- edit 2 strings in BitcoinGUI and replace "edit" with "show" as this
seems more clear in the context where it is used
This required some code movement (what was CWalletTx::AcceptToMemoryPool
doing in main?), and adding a few explicit includes that used to be
implicit through init.h.
They're supposed to be children of the walletview, and are added with
addWidget later on.
Inconsequential change because the object passed was already 0.
- changes some strings that were forgotton or made no sense in the conext
they are used
- remove an orphan file from the qt project file
- revert a small change in signverifymessagedialog.ui
- guard #include "bitcoin-config.h" with #if defined(HAVE_CONFIG_H)
- remove windowTitle from addressbookpage.ui
- this allows us to use emit message() over MessageBox:: or gui->message()
calls in sendcoinsdialog and walletview
- move main handlePaymentRequest() functionality back to BitcoinGUI
- move a showNormalIfMinimized() before gotoSendCoinsPage()
