- Remove dependency on sed (sed was overkill when you can just add plain
text to the git log --format command)
- Sort resulting list of authors alphabetically (case-insensitive)
- Provide an example of how to only generate authors between versions
801cb307b5 doc: Add release notes for -printtoconsole and -debuglogfile changes (Samuel B. Atwood)
Pull request description:
This adds release notes relevant to the changes in #13004 and documented in command line help in #13614.
Tree-SHA512: ff320415afa9be1ace37ebf0a69ee5a7e6d4167465bc41111be062a556da9b8accfc39553fac610e68521c7ab2095126ace4f012a32f5e9f37cbec39cfa74b04
161e8d40a4 RPC: Add new getzmqnotifications method. (Daniel Kraft)
caac39b0ac Make ZMQ notification interface instance global. (Daniel Kraft)
Pull request description:
This adds a new RPC method `getzmqnotifications`, which returns information about all active ZMQ notification endpoints. This is useful for software that layers on top of bitcoind, so it can verify that ZeroMQ is enabled and also figure out where it should listen.
See #13526.
Tree-SHA512: edce722925741c84ddbf7b3a879fc9db1907e5269d0d97138fe724035d93ee541c2118c24fa92f4197403f380d0e25c2fda5ca6c62d526792ea749cf527a99a0
This adds a new RPC method "getzmqnotifications", which returns
information about all active ZMQ notification endpoints. This is useful
for software that layers on top of bitcoind, so it can verify that
ZeroMQ is enabled and also figure out where it should listen.
See https://github.com/bitcoin/bitcoin/issues/13526.
af6ac3b677 doc: Remove mention of Qt4 from build docs (Wladimir J. van der Laan)
462c71f71b test: Update travis to not test Qt4 anymore (Wladimir J. van der Laan)
907f73bbc5 gui: Remove QT_VERSION fallbacks for Qt < 5 (Wladimir J. van der Laan)
bad068ad9f build: Build system changes to support only Qt5 (Wladimir J. van der Laan)
Pull request description:
Implements #8263.
Qt4.x has been EOL since 2015, and at least Gentoo has, or is going to drop support for it. I wouldn't be surprised if other Linux distributions follow.
This removes Qt4 detection from the build system, as well as removes all Qt4 fallbacks from the code. Turns out there's more than I expected: this is going to make maintenance of the GUI code, as well as adding new features significantly easier.
(I know there's still some references left to qt4 in RPM and Debian build script, but I don't have the knowledge how to fix them)
Tree-SHA512: d495924fd4dda6f6566ba44ee96be7cbe62e69ba1ca993b80a8449f78da852b7f1bd3e8200d57cfa1d72233c340eeff4596fb0032ecbddc715d99aea63817d3f
c9924a2756 Fix incorrect shell quoting in FreeBSD build instructions. (murrayn)
Pull request description:
The current instructions suggest:
BDB_PREFIX='$PWD/db4'
which results in BDB_PREFIX being set, literally, to '$PWD/db4'.
Tree-SHA512: 4a920d7a506ff94fb12793f0b8161fdfe0798382cfa88290a0eadd6926843b577328f7159a55039e2655def7ddf2e7a1eaa3dd30490292d4a920c98759becf56
e56771365b Do not use uppercase characters in source code filenames (practicalswift)
419a1983ca docs: Add a note about the source code filename naming convention (practicalswift)
Pull request description:
Add a note about the source code filename naming convention.
Tree-SHA512: 8d329bd9e19bcd26e74b0862fb0bc2369b46095dbd3e69d34859908632763abd7c3d00ccc44ee059772ad4bae4460c2bcc1c0e22fd9d8876d57e5fcd346cea4b
16e3cd380a Clarify include recommendation (practicalswift)
6d10f43738 Enforce the use of bracket syntax includes ("#include <foo.h>") (practicalswift)
906bee8e5f Use bracket syntax includes ("#include <foo.h>") (practicalswift)
Pull request description:
When analysing includes in the project it is often assumed that the preferred bracket include syntax (`#include <foo.h>`) mentioned in `developer-docs.md` is used consistently. @sipa:s excellent circular dependencies script [`circular-dependencies.py`](50c69b7801/contrib/devtools/circular-dependencies.py) (#13228) is an example of a script making this reasonable assumption.
This PR enables automatic Travis checking of the include syntax making sure that the bracket syntax includes (`#include <foo.h>`) is used consistently.
Tree-SHA512: a414921aabe8e487ebed42f3f1cbd02fecd1add385065c1f2244cd602c31889e61fea5a801507ec501ef9bd309b05d3c999f915cec1c2b44f085bb0d2835c182
67e0e04140 [wallet] [docs] Update release notes for removing `getlabeladdress` (John Newbery)
81608178cf [wallet] [rpc] Remove getlabeladdress RPC (John Newbery)
Pull request description:
labels are associated with addresses (rather than addresses being
associated with labels, as was the case with accounts). The
getlabeladdress does not make sense in this model, so remove it.
getaccountaddress is still supported for one release as the accounts
API is deprecated.
Tree-SHA512: 7f45d0456248ebcc4e54dd34e2578a09a8ea8e4fceda75238ccea9d731dc99a3f3c0519b18a9739de17d2e6e59c9c2259ba67c9ae2e3cb2a40ddb14b9193fe29
cbede7dbfd [qt] OptionsDialog: add prune setting (Sjors Provoost)
Pull request description:
The default suggested value is 2 GB. Minimum is 1 GB (550 MB rounded up).
When the user toggles this setting, a strong warning appears that undoing requires re-downloading the chain:
<img width="478" alt="schermafbeelding 2018-05-15 om 12 35 24" src="https://user-images.githubusercontent.com/10217/40051858-7939cc20-583c-11e8-9120-327a75376732.png">
Tooltip points out that actual disk usage can be higher. It's a bit vague on the "advanced features", because I'm assuming anyone who needs to use `-rescan` and `-txindex` will read the documentation, and a more detailed text would needlessly confuse everyone else.
<img width="450" alt="schermafbeelding 2018-05-15 om 12 33 51" src="https://user-images.githubusercontent.com/10217/40051791-49d6156a-583c-11e8-97b9-7de6dfd8c481.png">
The UI uses gigabytes for readability and easy of use. There is also no manual pruning UI (`prune=1`). The user will have to use `bitcoin.conf` for those things.
Fixes#6461. When combined with #13029 the user, after pruning their node, can safely reset settings and/or use bitcoind without having to edit `bitcoin.conf`. However I don't think that's an essential prerequisite.
Tree-SHA512: e17aff276d7235fbd40796adb6431d430620788a753ee13bc064abd35d2edc4280a3d3cddc18e42b4e00edff13ed18fd4f2a966c6f0b43b689afd13673e0c4bf
2b30ccc30a [docs] update transifex doc link (Cristian Mircea Messel)
Pull request description:
The old link is no longer working.
#13364
Tree-SHA512: 5729b9eabbdf8e05cb60be1bedc7e21a2052bb2921dca8322d8348c3ea0f7ee33f2e2e32a19f21bbe2b93b48ed221cfcb020592d0e6b118b77ca34e14bb30b89
docs: Linked to the 'Building on FreeBSD' section of the Unix guide where it lists BSD specific guides.
Created a FreeBSD build guide (doc/build-freebsd.md).
Added in warning about the version of 'gdb' installed by default.
Removed the FreeBSD build instructions now that they have their own guide (doc/build-freebsd.md).
Updated the sentence to refer to the BSD guides in the 'doc' directory for more specific BSD build instructions.
Minor grammatical fix.
fa3c910bfe test: Move linters to test/lint, add readme (MarcoFalke)
Pull request description:
This moves the checks and linters from `devtools` to a subfolder in `test`. (Motivated by my opinion that the dev tools are mostly for generating code and updating the repo whereas the linters are read-only checks.)
Also, adds a readme to clarify that checks and linters are only meant to prevent bugs and user facing issues, not merely stylistic preference or inconsistencies. (This is motivated by the diversity in developers and work flows as well as existing code styles. It would be too disruptive to change all existing code to a single style or too burdensome to force all developers to adhere to a single style. Also note that our style guide is changing, so locking in at the wrong style "too early" would only waste resources.)
Tree-SHA512: 9b10e89f2aeaf0c8a9ae248aa891d74e0abf0569f8e5dfd266446efa8bfaf19f0ea0980abf0b0b22f0d8416ee90d7435d21a9f9285b66df43f370b7979173406
87fe292d89 doc: Mention disabling BIP61 in bips.md (Wladimir J. van der Laan)
fe16dd8226 net: Add option `-enablebip61` to configure sending of BIP61 notifications (Wladimir J. van der Laan)
Pull request description:
This commit adds a boolean option `-peersendreject`, defaulting to `1`, that can be used to disable the sending of [BIP61](https://github.com/bitcoin/bips/blob/master/bip-0061.mediawiki) `reject` messages. This functionality has been requested for various reasons:
- security (DoS): reject messages can reveal internal state that can be used to target certain resources such as the mempool more easily.
- bandwidth: a typical node sends lots of reject messages; this counts against upstream bandwidth. Also the reject messages tend to be larger than the message that was rejected.
On the other hand, reject messages can be useful while developing client software (I found them indispensable while creating bitcoin-submittx), as well as for our own test cases, so whatever the default becomes on the long run, IMO the functionality should be retained as option. But that's a discussion for later, for now it's simply a node operator decision.
Also adds a RPC test that checks the functionality.
Tree-SHA512: 9488cc53e13cd8e5c6f8eb472a44309572673405c1d1438c3488f627fae622c95e2198bde5ed7d29e56b948e2918bf1920239e9f865889f4c37c097c37a4d7a9
9d4f9421a4 doc: Bump to Ubuntu Bionic 18.04 in build-windows.md (Chun Kuan Lee)
Pull request description:
Windows starts to provide Ubuntu 18.04 WSL, it can be downloaded from Microsoft Store.
Tree-SHA512: a96ed03f36894ad867fd88631c1497eac7fc1cdaee8f59f36f34781df0b0f0b352a1bd8f09eba61002534fb7e0fe460006f223e37d61ad888197a36d17b43178
25b7ab9 doc: Add release notes for -includeconf (Karl-Johan Alm)
0f0badd test: Test includeconf parameter. (Karl-Johan Alm)
629ff8c -includeconf=<path> support in config handler, for including external configuration files (Karl-Johan Alm)
Pull request description:
Fixes: #10071.
Done:
- adds `-includeconf=<path>`, where `<path>` is relative to `datadir` or to the path of the file being read, if in a file
- protects against circular includes
- updates help docs
~~~Thoughts:~~~
- ~~~I am not sure how to test this in a neat manner. Feedback on this would be nice. Will dig/think though.~~~
Tree-SHA512: cb31f1b2f69fbc0890d264948eb2e501ac05cf12f5e06a5942f9c1539eb15ea8dc3cae817f4073aecb2fcc21d0386747f14f89d990772003a76e2a6d25642553
1e46d8a Get rid of ambiguous OutputType::NONE value (Russell Yanofsky)
Pull request description:
Based on suggestion by @sipa https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output type that couldn't be parsed, or to an automatic change output mode. This change drops the NONE enum and uses a simple bool to indicate parse failure, and a new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty string ("") address types instead of treating them like they were unset. This simplifies the parsing code a little bit and could prevent RPC usage mistakes. It's noted in the release notes.
Follows up #12408 by @MarcoFalke
Followups for future PRs:
- [ ] Add explicit support for specifying "auto" in `ParseOutputType` as suggested by promag and sipa: https://github.com/bitcoin/bitcoin/pull/12729#issuecomment-374799567 and https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969481
- [ ] Add wallet `AddressChangeType` method to complement `TransactionChangeType`: https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969618.
Tree-SHA512: 8b08b272bcb177a0a9e556dcd965840a7fe601ef83ca97938b879c9b1a33b5b3f96939e1bceef11ba7c644ac21bfd6c1dbc6ca715cd1da4ace50475240e4ee48
39d2911 [Docs] Add version footnote to tor.md (Damian Williamson)
Pull request description:
[Docs] Add version footnote to tor.md
Added note to section 2, part -edits to `/etc/tor/torrc`- indicating this is only required for Tor version 0.2.7.0 and older, since section 3 states it is valid for Tor version 0.2.7.1 and newer. Added ref link from section 2 version footnote to section 3. Re-styled headings to work on GitHub -alternate heading style markup creation issue with numbered headings and thus headings and automatic heading links are broken-
Ref: [Issue# 12376](https://github.com/bitcoin/bitcoin/issues/12376)
Signed-off-by: Damian Williamson \<willtech@live.com.au\>
Tree-SHA512: 439f4ccc3e196011af448b220adf26b0e653ac589bf4cfbbc276c1500c9d08f209c9d6101e4d232857779d9f25164cfb222ed30e3d63de116f9121e6ebde31c3
Added note to section 2, part -edits to `/etc/tor/torrc`- indicating this is only required for Tor version 0.2.7.0 and older, since section 3 states it is valid for Tor version 0.2.7.1 and newer. Added ref link from section 2 version footnote to section 3. Re-styled headings to work on GitHub -alternate heading style markup creation issue with numbered headings and thus headings and automatic heading links are broken- Ref: [Issue# 12376](https://github.com/bitcoin/bitcoin/issues/12376)
Signed-off-by: Damian Williamson <willtech@live.com.au>
7d0f80b Use anonymous namespace instead of static functions (Pieter Wuille)
b61fb71 Mention removal of bare multisig IsMine in release notes (Pieter Wuille)
9c2a8b8 Do not treat bare multisig as IsMine (Pieter Wuille)
08f3228 Optimization: only test for witness scripts at top level (Pieter Wuille)
3619735 Track difference between scriptPubKey and P2SH execution in IsMine (Pieter Wuille)
ac6ec62 Switch to a private version of SigVersion inside IsMine (Pieter Wuille)
19fc973 Do not expose SigVersion argument to IsMine (Pieter Wuille)
fb1dfbb Remove unused IsMine overload (Pieter Wuille)
952d821 Make CScript -> CScriptID conversion explicit (Pieter Wuille)
Pull request description:
Currently our wallet code will treat bare multisig outputs (meaning scriptPubKeys with multiple public keys + `OP_CHECKMULTISIG` operator in it) as ours without the user asking for it, as long as all private keys in it are in our wallet.
This is a pointless feature. As it only works when all private keys are in one place, it's useless compared to single key outputs (P2PK, P2PKH, P2WPKH, P2SH-P2WPKH), and worse in terms of space, cost, UTXO size, and ability to test (due to lack of address format for them).
Furthermore, they are problematic in that producing a list of all `scriptPubKeys` we accept is not tractable (it involves all combinations of all public keys that are ours). In further wallet changes I'd like to move to a model where all scriptPubKeys that are treated as ours are explicit, rather than defined by whatever keys we have. The current behavior of the wallet is very hard to model in such a design, so I'd like to get rid of it.
I think there are two options:
* Remove it entirely (do not ever accept bare multisig outputs as ours, unless watched)
* Only accept bare multisig outputs in situations where the P2SH version of that output would also be acceptable
This PR implements the first option. The second option was explored in #12874.
Tree-SHA512: 917ed45b3cac864cee53e27f9a3e900390c576277fbd6751b1250becea04d692b3b426fa09065a3399931013bd579c4f3dbeeb29d51d19ed0c64da75d430ad9a
7de1de7 Add new fee structure with all sub-fields denominated in BTC (mryandao)
Pull request description:
the denomination for `fee` is current in btc while the other such as `decendentFee` and `ancestorFee` are in satoshis.
Tree-SHA512: e428f6dca1d339f89ab73e38ce5903f5465c46b159069d9bcc3f8b1140fe6657fa49a11abe0088e9f7ba9999f64af72a349a4735bf5eaa61b8e4a185b23543f3
fad2958 [doc] build-windows: Switch to Artful, since Zesty is EOL (MarcoFalke)
Pull request description:
According to https://wiki.ubuntu.com/Releases#End_of_Life, Zesty is EOL, so bump to Artful for now.
Note that Artful is going to be EOL soon as well, so I am not sure how to proceed after that.
Tree-SHA512: 8efc1ade429cf053f4c69e764175aad8790ded71f04bb9963202be171f1cfa1a3de55a207c0b19271d2f536feafa754ed71a6fafc597e3023bdf0e02fa5cd5e5
cead28b [docs] Add release notes for deprecated 'account' API (John Newbery)
72c9575 [wallet] [tests] Add tests for accounts/labels APIs (John Newbery)
109e05d [wallet] [rpc] Deprecate wallet 'account' API (John Newbery)
3576ab1 [wallet] [rpc] Deprecate account RPC methods (John Newbery)
3db1ba0 [tests] Set -deprecatedrpc=accounts in tests (John Newbery)
4e671f0 [tests] Rename rpc_listtransactions.py to wallet_listtransactions.py (John Newbery)
a28b907 [wallet] [rpc] Remove duplicate entries in rpcwallet.cpp's CRPCCommand table (John Newbery)
Pull request description:
Deprecate all accounts functionality and make it only accessible by using `-deprecatedrpc=accounts`.
Accounts specific RPCs, account arguments, and account related results all require the `-deprecatedrpc=accunts` startup option now in order to see account things.
Several wallet functional tests use the accounts system. Those tests are unchanged, except to start the nodes with `-deprecatedrpc=accounts`. We can slowly migrate those tests to use the 'label' API instead of the 'account' API before accounts are fully removed.
Tree-SHA512: 89f4ae2fe6de4a1422f1817b0997ae22d63ab5a1a558362ce923a3871f3e42963405d6573c69c27f1764679cdee5b51bf52202cc407f1361bfd8066d652f3f37
9e50c337c Note new weight field in release-notes. (Matt Corallo)
d0d9112b7 Test new weight field in p2p_segwit (Matt Corallo)
2874709a9 Expose a transaction's weight via RPC (Matt Corallo)
Pull request description:
This seems like an obvious oversight.
Tree-SHA512: defd047de34fb06a31f589e1a4eef68fcae85095cc67b7c8fb434237bb40300d7f3f97e852d3e7226330e26b96943846b7baf6da0cfc79db8d56e9c1f7848ad9
c25321f Add config changes to release notes (Anthony Towns)
5e3cbe0 [tests] Unit tests for -testnet/-regtest in [test]/[regtest] sections (Anthony Towns)
005ad26 ArgsManager: special handling for -regtest and -testnet (Anthony Towns)
608415d [tests] Unit tests for network-specific config entries (Anthony Towns)
68797e2 ArgsManager: Warn when ignoring network-specific config setting (Anthony Towns)
d1fc4d9 ArgsManager: limit some options to only apply on mainnet when in default section (Anthony Towns)
8a9817d [tests] Use regtest section in functional tests configs (Anthony Towns)
30f9407 [tests] Unit tests for config file sections (Anthony Towns)
95eb66d ArgsManager: support config file sections (Anthony Towns)
4d34fcc ArgsManager: drop m_negated_args (Anthony Towns)
3673ca3 ArgsManager: keep command line and config file arguments separate (Anthony Towns)
Pull request description:
The weekly meeting on [2017-12-07](http://www.erisian.com.au/meetbot/bitcoin-core-dev/2017/bitcoin-core-dev.2017-12-07-19.00.log.html) discussed allowing options to bitcoin to have some sensitivity to what network is in use. @theuni suggested having sections in the config file:
<cfields> an alternative to that would be sections in a config file. and on the
cmdline they'd look like namespaces. so, [testnet] port=5. or -testnet::port=5.
This approach is (more or less) supported by `boost::program_options::detail::config_file_iterator` -- when it sees a `[testnet]` section with `port=5`, it will treat that the same as "testnet.port=5". So `[testnet] port=5` (or `testnet.port=5` without the section header) in bitcoin.conf and `-testnet.port=5` on the command line.
The other aspect to this question is possibly limiting some options so that there is no possibility of accidental cross-contamination across networks. For example, if you're using a particular wallet.dat on mainnet, you may not want to accidentally use the same wallet on testnet and risk reusing keys.
I've set this up so that the `-addnode` and `-wallet` options are `NETWORK_ONLY`, so that if you have a bitcoin.conf:
wallet=/secret/wallet.dat
upnp=1
and you run `bitcoind -testnet` or `bitcoind -regtest`, then the `wallet=` setting will be ignored, and should behave as if your bitcoin.conf had specified:
upnp=1
[main]
wallet=/secret/wallet.dat
For any `NETWORK_ONLY` options, if you're using `-testnet` or `-regtest`, you'll have to add the prefix to any command line options. This was necessary for `multiwallet.py` for instance.
I've left the "default" options as taking precedence over network specific ones, which might be backwards. So if you have:
maxmempool=200
[regtest]
maxmempool=100
your maxmempool will still be 200 on regtest. The advantage of doing it this way is that if you have `[regtest] maxmempool=100` in bitcoin.conf, and then say `bitcoind -regtest -maxmempool=200`, the same result is probably in line with what you expect...
The other thing to note is that I'm using the chain names from `chainparamsbase.cpp` / `ChainNameFromCommandLine`, so the sections are `[main]`, `[test]` and `[regtest]`; not `[mainnet]` or `[testnet]` as might be expected.
Thoughts? Ping @MeshCollider @laanwj @jonasschnelli @morcos
Tree-SHA512: f00b5eb75f006189987e5c15e154a42b66ee251777768c1e185d764279070fcb7c41947d8794092b912a03d985843c82e5189871416995436a6260520fb7a4db
Suggested formatting for namespaces in the developer guide is currently
inconsistent. This commit updates the developer guide and clang-format
configuration to consistently put "namespace" and opening/closing braces
on the same line. Example:
```c++
namespace boost {
namespace signals2 {
class connection;
} // namespace signals2
} // namespace boost
```
Currently the "Source code organization" section has an example like the one
above, but the "Coding style" section example and description put a newline
between the opening "namespace foo" and brace (but oddly no newline between
closing namespace and brace).
Avoiding newlines before namespace opening braces makes nested declarations
less verbose and also avoids asymmetry with closing braces. It's also a
common style used in other codebases:
* https://google.github.io/styleguide/cppguide.html#Namespaces
* https://developer.mozilla.org/en-US/docs/Mozilla/Developer_guide/Coding_Style#Classes
* https://llvm.org/docs/CodingStandards.html#namespace-indentation
fad0fc3c9a Refine travis check for duplicate includes (MarcoFalke)
Pull request description:
Since there is no harm in having "duplicate" includes and it makes it obvious what are the dependencies of each file, without having to do static analysis or jumping between files, I'd suggest to revert the travis check for duplicate includes.
Generally, I think that enforcing minor style preferences should not be done via travis. The cost of maintaining and the burden on other developers is too high. C.f discussion in https://github.com/bitcoin/bitcoin/pull/10973#discussion_r180142594
Tree-SHA512: 97ab0e769d457ccfb873fff6c99613f8b944cd7ef95bfdccb0e1bbe8f5df1f16548c658fa03af42516f806546e75646d338a061e7b057619490235d311ca21f1
d1b622b tests: Add check for test suite name uniqueness in lint-tests.sh (practicalswift)
dc8067b tests: Add note about uniqueness requirement for test suite names (practicalswift)
3ebfb2d tests: Avoid test suite name collision in wallet crypto_tests (MarcoFalke)
Pull request description:
* Add documentation: Add note about test suite name uniqueness requirement in developer notes
* Add regression test: Update `lint-tests.sh` to make it check also for test suite name uniqueness
Context: #12894 (`tests: Avoid test suite name collision in wallet crypto_tests`)
Tree-SHA512: 3c8502db069ef3d753f534976a86a997b12bac539e808a7285193bf81c9dd8c1b06821c3dd1bdf870ab87722b02c8aa9574c62ace70c2a1b8091785cb8c9aace
fafcad3 doc: Add testmempoolaccept to release-notes (MarcoFalke)
Pull request description:
Some fixups for #11742:
* Add release notes for the new rpc
* Fix a typo in the original pull
* Make the mempool reference passed to `CheckInputsFromMempoolAndCache` const, since that function is called before we return from ATMP and we must not modify the mempool.
Tree-SHA512: 72c459ba69f7698a69c91d2592f10f7fb1864846c7d8c525050d48286f92ba5ec5fe554c54235b52fbd9a8f00226c526ad84584641ec39084e1a1310a261510d
0314ad4 doc: add qrencode to brew install instructions (buddilla)
Pull request description:
Build was missing qr code(qrencode libs) support and brew team no longer supports anything less than macOS 10.11
Tree-SHA512: 1bc22f02e64f0db0730180ca97fba17c7ad05c9d81c60d1b0d029196d5141e691e524d2df2be1fb89852076f3a252da69bb117042cbd08985b89954432692529
Based on suggestion by Pieter Wuille <pieter.wuille@gmail.com> at
https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output
type that couldn't be parsed, or to an automatic change output mode. This
change drops the NONE enum and uses a simple bool indicate parse failure, and a
new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty
string ("") address types instead of treating them like they were unset. This
simplifies the parsing code a little bit and could prevent RPC usage mistakes.
It's noted in the release notes.
9960137 Add developer notes about blocking GUI code (Russell Yanofsky)
9a61eed Use WalletBalances struct in Qt (Russell Yanofsky)
56f33ca Remove direct bitcoin calls from qt/sendcoinsdialog.cpp (Russell Yanofsky)
e872c93 Remove direct bitcoin access from qt/guiutil.cpp (Russell Yanofsky)
5884558 Remove direct bitcoin calls from qt transaction table files (Russell Yanofsky)
3cab2ce Remove direct bitcoin calls from qt/paymentserver.cpp (Russell Yanofsky)
3ec2ebc Remove direct bitcoin calls from qt/addresstablemodel.cpp (Russell Yanofsky)
827de03 Remove direct bitcoin calls from qt/coincontroldialog.cpp (Russell Yanofsky)
a0704a8 Remove most direct bitcoin calls from qt/walletmodel.cpp (Russell Yanofsky)
90d4640 Remove direct bitcoin calls from qt/optionsdialog.cpp (Russell Yanofsky)
582daf6 Remove direct bitcoin calls from qt/rpcconsole.cpp (Russell Yanofsky)
3034a46 Remove direct bitcoin calls from qt/bantablemodel.cpp (Russell Yanofsky)
e0b66a3 Remove direct bitcoin calls from qt/peertablemodel.cpp (Russell Yanofsky)
d7c2c95 Remove direct bitcoin calls from qt/intro.cpp (Russell Yanofsky)
fe6f27e Remove direct bitcoin calls from qt/clientmodel.cpp (Russell Yanofsky)
5fba3af Remove direct bitcoin calls from qt/splashscreen.cpp (Russell Yanofsky)
c2f672f Remove direct bitcoin calls from qt/utilitydialog.cpp (Russell Yanofsky)
3d619e9 Remove direct bitcoin calls from qt/bitcoingui.cpp (Russell Yanofsky)
c0f2756 Remove direct bitcoin calls from qt/optionsmodel.cpp (Russell Yanofsky)
71e0d90 Remove direct bitcoin calls from qt/bitcoin.cpp (Russell Yanofsky)
ea73b84 Add src/interface/README.md (Russell Yanofsky)
Pull request description:
This is a refactoring PR that does not change behavior in any way. This change:
1. Creates abstract [`Node`](https://github.com/ryanofsky/bitcoin/blob/pr/ipc-local/src/interface/node.h) and [`Wallet`](https://github.com/ryanofsky/bitcoin/blob/pr/ipc-local/src/interface/wallet.h) interfaces in [`src/interface/`](https://github.com/ryanofsky/bitcoin/tree/pr/ipc-local/src/interface)
1. Updates Qt code to call the new interfaces. This largely consists of diffs of the form:
```diff
- InitLogging();
- InitParameterInteraction();
+ node.initLogging();
+ node.initParameterInteraction();
```
This change allows followup PR #10102 (makes `bitcoin-qt` control `bitcoind` over an IPC socket) to work without any significant updates to Qt code. Additionally:
* It provides a single place to describe the interface between GUI and daemon code.
* It can make better GUI testing possible, because Node and Wallet objects have virtual methods that can be overloaded for mocking.
* It can be used to help make the GUI more responsive (see https://github.com/bitcoin/bitcoin/issues/10504)
Other notes:
* I used python scripts [hide-globals.py](https://github.com/ryanofsky/home/blob/master/src/2017/hide-globals/hide-globals.py) and [replace-syms.py](https://github.com/ryanofsky/home/blob/master/src/2017/hide-globals/replace-syms.py) to identify all the places where Qt code was accessing libbitcoin global variables and calling functions accessing those global variables.
* These changes were originally part of #10102. Thanks to @JeremyRubin for the suggestion of splitting them out.
Commits:
- [`ea73b84d2d` Add src/interface/README.md](ea73b84d2d)
- [`71e0d90876` Remove direct bitcoin calls from qt/bitcoin.cpp](71e0d90876)
- [`c0f2756be5` Remove direct bitcoin calls from qt/optionsmodel.cpp](c0f2756be5)
- [`3d619e9d36` Remove direct bitcoin calls from qt/bitcoingui.cpp](3d619e9d36)
- [`c2f672fb19` Remove direct bitcoin calls from qt/utilitydialog.cpp](c2f672fb19)
- [`5fba3af21e` Remove direct bitcoin calls from qt/splashscreen.cpp](5fba3af21e)
- [`fe6f27e6ea` Remove direct bitcoin calls from qt/clientmodel.cpp](fe6f27e6ea)
- [`d7c2c95948` Remove direct bitcoin calls from qt/intro.cpp](d7c2c95948)
- [`e0b66a3b7c` Remove direct bitcoin calls from qt/peertablemodel.cpp](e0b66a3b7c)
- [`3034a462a5` Remove direct bitcoin calls from qt/bantablemodel.cpp](3034a462a5)
- [`582daf6d22` Remove direct bitcoin calls from qt/rpcconsole.cpp](582daf6d22)
- [`90d4640b7e` Remove direct bitcoin calls from qt/optionsdialog.cpp](90d4640b7e)
- [`a0704a8996` Remove most direct bitcoin calls from qt/walletmodel.cpp](a0704a8996)
- [`827de038ab` Remove direct bitcoin calls from qt/coincontroldialog.cpp](827de038ab)
- [`3ec2ebcd9b` Remove direct bitcoin calls from qt/addresstablemodel.cpp](3ec2ebcd9b)
- [`3cab2ce5f9` Remove direct bitcoin calls from qt/paymentserver.cpp](3cab2ce5f9)
- [`58845587e1` Remove direct bitcoin calls from qt transaction table files](58845587e1)
- [`e872c93ee8` Remove direct bitcoin access from qt/guiutil.cpp](e872c93ee8)
- [`56f33ca349` Remove direct bitcoin calls from qt/sendcoinsdialog.cpp](56f33ca349)
- [`9a61eed1fc` Use WalletBalances struct in Qt](9a61eed1fc)
- [`9960137697` Add developer notes about blocking GUI code](9960137697)
Tree-SHA512: 7b9eff2f37d4ea21972d7cc6a3dbe144248595d6c330524396d867f3cd2841d666cdc040fd3605af559dab51b075812402f61d628d16cf13719335c1d8bf8ed3
db983beba6 tests: Add lint-tests.sh which checks the test suite naming convention (practicalswift)
5fd864fe8a tests: Rename test suits not following the test suite naming convention (practicalswift)
7b4a296a71 tests: Add note about test suite naming convention (practicalswift)
Pull request description:
Changes:
* Add note about test suite naming convention
* Fix exceptions
* Add regression test
Rationale:
* Consistent naming of test suites makes programmatic test running of specific tests/subsets of tests easier
* Explicit is better than implicit
Before this commit:
```
$ contrib/devtools/lint-tests.sh
The test suite in file src/test/foo_tests.cpp should be named
"foo_tests". Please make sure the following test suites follow
that convention:
src/test/blockchain_tests.cpp:BOOST_FIXTURE_TEST_SUITE(blockchain_difficulty_tests, BasicTestingSetup)
src/test/prevector_tests.cpp:BOOST_FIXTURE_TEST_SUITE(PrevectorTests, TestingSetup)
src/wallet/test/coinselector_tests.cpp:BOOST_FIXTURE_TEST_SUITE(coin_selection_tests, WalletTestingSetup)
src/wallet/test/crypto_tests.cpp:BOOST_FIXTURE_TEST_SUITE(wallet_crypto, BasicTestingSetup)
$
```
After this commit:
```
$ contrib/devtools/lint-tests.sh
$
```
Tree-SHA512: 7258ab9a6b9b8fc1939efadc619e2f2f02cfce8034c7f2e5dc5ecc769aa12e17f6fb8e363817feaf15c026c5b958b2574525b8d2d3f6be69658679bf8ceea9e9
6feb46c Add --with-sanitizers option to configure (Evan Klitzke)
Pull request description:
This adds configure options for `-fsanitize=address`, `-fsanitize=thread`, and `-fsanitize=undefined` which are all disabled by default. These flags are useful for developers who wish to do additional safety checking. Note that some of these are mutually incompatible, and these may have a large performance overhead.
There's some kind of strange logic required to properly check for the availability of these flags in a way that works on both GCC and Clang, hopefully the comments make it clear what's going on.
Tree-SHA512: 2d6fe402799110e59ee452dddf37f7ca2d26a7fecec50be25c8a134e4a20beb31f1e8f438dffd443641562418075896d1eeb450623425b272d80e05e3027a587
0bd2ec5 Improve formatting of developer notes (Evan Klitzke)
Pull request description:
The developer notes file has gotten pretty large and unwieldly. This reorganizes some content, most notably by adding a TOC to the page. Compare how the page looks in [my branch](https://github.com/eklitzke/bitcoin/blob/developer-notes/doc/developer-notes.md) vs [master](https://github.com/eklitzke/bitcoin/blob/master/doc/developer-notes.md).
I know there's long-term interest in moving a lot of this content to the bitcoin-core/docs repo on GitHub, but this makes things better now.
The TOC format here is a semi-standard extension to Markdown files that you may have seen on GitHub pages in other projects. The `<!-- markdown-toc -->` comments used by these tools to know where the TOC starts/ends. The following tools all understand this format:
* [Sphinx](http://www.sphinx-doc.org/en/master/)
* [Pandoc](https://pandoc.org/)
* [markdown-toc.el](https://github.com/ardumont/markdown-toc) (what I used)
* various plugins for [vim](https://github.com/mzlogin/vim-markdown-toc) and other editors
I used this TOC extension at a previous job, and my observation is that it's fine if people just edit the TOC manually. It's just text and it's not a huge deal if it gets a little out of sync. It can also be regenerated at any time by anyone with any of these tools.
Tree-SHA512: 298d1605ea5e8bfc0f75e70570c23ebd6891e4ffcdedd24fefadc23edd6e4b96509d8d102209868468a1b3ddbe2c3b8462698cdda8b9421348b5bc6f7b8d0cb8
This change significantly increases IBD performance by increasing the
amount of the UTXO index that can remain in memory. To ensure this
doesn't cause problems in the future, a static_assert on the LevelDB
version has been added, which must be updated by anyone upgrading
LevelDB.
1874058 Make base58 python contrib code work with python3 (Evan Klitzke)
bc6fdf2 Change all python files to use Python3 (John Newbery)
Pull request description:
Following discussion here: https://github.com/bitcoin/bitcoin/pull/11843#issuecomment-351033742
It's easier for maintainers if all python tools/scripts support only a single version of Python. There are only a few scripts that aren't explicitly python3 at this point, so this PR changes those remaining scripts to explicitly require python3.
Tree-SHA512: 5d38eef6e0fc7d8515e23a1f4c75e8b4160fd0fe23cba52a1f41689b114e54a9e503e0724829e8b41982ef98f2d113df80d9e238213b74f09ceaed0344a19e24
f381299 Move CKeyStore::cs_KeyStore to CBasicKeyStore (João Barbosa)
25eb9f5 Inline CKeyStore::AddKey(const CKey &) in CBasicKeyStore (João Barbosa)
Pull request description:
Made these simplifications while reviewing #12714. This aims to make `CKeyStore` a *pure* interface:
- no variable members - the mutex is moved to `CBasicKeyStore` which is where it is used;
- no method implementations - `AddKey(const CKey &)` is moved to `CBasicKeyStore` which is where it is needed.
Tree-SHA512: 84e44f4390c59600e5cefa599b5464e1771c31dd4abc678ef50db8e06ffac778d692860a352918444f8bcd66430634637b6277a818a658721ffc4f381c1c6a90
4757c04 [config] Remove blockmaxsize option (John Newbery)
Pull request description:
The blockmaxsize option was marked as deprecated in V0.15.1, and code
was added to convert provided blockmaxsize into blockmaxweight. However,
this code was incorrectly implemented, and blockmaxsize was silently
ignored.
No users have complained about blockmaxsize being ignored, so just
remove it in V0.17.
Fixes#12640
cc @ajtowns
Tree-SHA512: 968d71d37bf175c5a02539ddec289a12586f886e1dfe64c1d9aa5e39db48d06d21665153824fac3b11503a55f0812d2f1115a2d726aafd37b76ed629ec0aa671
d2527bd Rename wallet_accounts.py test (Russell Yanofsky)
045eeb8 Rename account to label where appropriate (Russell Yanofsky)
Pull request description:
Rename account to label where appropriate
This change only updates strings and adds RPC aliases, but should simplify the implementation of address labels in https://github.com/bitcoin/bitcoin/pull/7729, by getting renaming out of the way and letting that change focus on semantics.
The difference between accounts and labels is that labels apply only to addresses, while accounts apply to both addresses and transactions (transactions have "from" and "to" accounts). The code associating accounts with transactions is clumsy and unreliable so we would like get rid of it.
---
There is a rebased version of #7729 atop this PR at https://github.com/ryanofsky/bitcoin/commits/pr/label, see https://github.com/bitcoin/bitcoin/pull/7729#issuecomment-338417139.
Tree-SHA512: b3f934e612922d6290f50137f8ba71ddfaea4485713c7d97e89400a8b73b09b254f9186dffa462c77f5847721f5af9852b5572ade5443d8ee95dd150b3edb7ff
The blockmaxsize option was marked as deprecated in V0.15.1, and code
was added to convert provided blockmaxsize into blockmaxweight. However,
this code was incorrectly implemented, and blockmaxsize was silently
ignored.
No users have complained about blockmaxsize being ignored, so just
remove it in V0.17.
This change only updates strings and adds RPC aliases, but should simplify the
implementation of address labels in
https://github.com/bitcoin/bitcoin/pull/7729, by getting renaming out of the
way and letting it focus on semantics.
The difference between accounts and labels is that labels apply only to
addresses, while accounts apply to both addresses and transactions
(transactions have "from" and "to" accounts). The code associating accounts
with transactions is clumsy and unreliable so we would like get rid of it.
e29c6c8 Ubuntu xenial first dependencies (Nick Vercammen)
Pull request description:
Add update and upgrade commands to enable the installation of the first dependencies on ubuntu xenial. If those are not executed some packages can not be found.
Tree-SHA512: ad15f8f053703f5b785c307a39b28bd3584fb1f9c32cc166e53955733f03ea3df445959577d65ac8c95c3619a0417894121603f8e656421d30992f4fdd6055f9
fac70134a rpc: Update createrawtransaction examples (MarcoFalke)
fa06dfce0 [rpc] createrawtransaction: Accept sorted outputs (MarcoFalke)
8acd25d85 rpc: Allow typeAny in RPCTypeCheck (MarcoFalke)
Pull request description:
The second parameter of the `createrawtransaction` is a dictionary of the outputs. This comes with at least two drawbacks:
* In case of duplicate keys, either of them might silently disappear, with no user feedback at all. A user needs to make other mistakes, but this could eventually lead to abnormal tx fees.
* A dictionary does not guarantee that keys are sorted. Again, a user needs to keep this in mind, as it could eventually lead to excessive tx fees.
Even though my scenario of loss-of-funds is unlikely to happen, I see it as a inconvenience that should be fixed.
Tree-SHA512: cd562f34f7f9f79c7d3433805971325c388c2035611be283980f4049066a622df4f0afdc11d7ac96662260ec0115147cb65e1ab5268f5a1b063242f3fe425f77
Add update and upgrade commands to enable the installation of the first dependencies on ubuntu xenial. If those are not executed some packages can not be found.
* Z is the zone designator for the zero UTC offset.
* T is the delimiter used to separate date and time.
This makes it clear for the end-user that the date/time logged is
specified in UTC and not in the local time zone.
cc879675e1 depends: Remove ccache (fanquake)
Pull request description:
After discussion with @theuni, we can possibly just remove ccache from depends entirely.
Related to #12606
Tree-SHA512: ae0a60c8d97467fa41d617daa48ed22159cf32613808634a983304901dd5ed27124e77868d2314004e5144f7b35ba1333f720bb12daec4c5ca03aaf29d593ef2
be8ab7d08 Create new wallet databases as directories rather than files (Russell Yanofsky)
26c06f24e Allow wallet files not in -walletdir directory (Russell Yanofsky)
d8a99f65e Allow wallet files in multiple directories (Russell Yanofsky)
Pull request description:
This change consists of three commits:
* The first commit is a pure refactoring that removes the restriction that two wallets can only be opened at the same time if they are contained in the same directory.
* The second commit removes the restriction that `-wallet` filenames can only refer to files in the `-walletdir` directory.
* The third commit makes second commit a little safer by changing bitcoin to create wallet databases as directories rather than files, so they can be safely backed up.
All three commits should be straightforward:
* The first commit adds around 20 lines of new code and then updates a bunch of function signatures (generally updating them to take plain fs::path parameters, instead of combinations of strings, fs::paths, and objects like CDBEnv and CWalletDBWrapper).
* The second commit removes two `-wallet` filename checks and adds some test cases to the multiwallet unit test.
* The third commit just changes the mapping from specified wallet paths to bdb environment & data paths.
---
**Note:** For anybody looking at this PR for the first time, I think you can skip the comments before _20 Nov_ and start reading at https://github.com/bitcoin/bitcoin/pull/11687#issuecomment-345625565. Comments before _20 Nov_ were about an earlier version of the PR that didn't include the third commit, and then confusion from not seeing the first commit.
Tree-SHA512: 00bbb120fe0df847cf57014f75f1f7f1f58b0b62fa0b3adab4560163ebdfe06ccdfff33b4231693f03c5dc23601cb41954a07bcea9a4919c8d42f7d62bcf6024
08e0855b9 Give hint about gitian not able to download (kallewoof)
Pull request description:
Gitian fails to perform downloads right now on my set up. This can be circumvented by first checking out the tag being built and then doing the depends download step before running `gbuild`.
This should of course be fixed in gitian, but having this note until it's fixed is definitely useful.
Tree-SHA512: ae9d0eb44ecfdae44d35aecc6e5fd6db7d9e95b8e0badc76a1d9aaf8fe70bc00a2914dfcb4f516d030560835af411515ca13736ebf8b49b7040b340457882779
Gitian fails to perform downloads right now on my set up. This can be circumvented by first checking out the tag being built and then doing the depends download step before running `gbuild`.
cfaac2a60 Add build support for 'gprof' profiling. (murrayn)
Pull request description:
Support for profiling build: `./configure --enable-profiling`
Tree-SHA512: ea983cfce385f1893bb4ab7f94ac141b7d620951dc430da3bbc92ae1357fb05521eac689216e66dc87040171a8a57e76dd7ad98036e12a2896cfe5ab544347f0
13a399a46 depends: patch pthread_set_name_np out of zeromq (Cory Fields)
8f7922636 depends: zeromq 4.2.3 (fanquake)
Pull request description:
This is a followup to #9254 and #11981. Zeromq 4.2.3 was released just after #9254 was merged, and contains a years worth of improvements/bug fixes. See the release notes [here](https://github.com/zeromq/libzmq/releases/tag/v4.2.3).
Todo:
- [ ] Add zeromq-4.2.3.tar.gz to /depends-sources on bitcoincore.org
- [ ] Verify gitian builds are still OK
- [ ] Check: https://github.com/zeromq/libzmq/pull/2787
Tree-SHA512: 85e06f47be3e1fdedcee50ce90e3391d69df2ea1c167472ffc3126d8970d418eb75141b970e422eb2fda9a8cad00e6ba5b36afa53565171a9ebaa152a9dc9b60
7eb665fc8 [Trivial] link mentioned scripted-diff-commit (Felix Wolfsteller)
Pull request description:
Make it easier for people who do not operate on a cloned repository to access the example mentioned.
Tree-SHA512: 1c06e551c68cad03e6bd541bf0e0076cdf0b48ef9b8b4e4a61435367c3435e2e4ccb934112e8dc29d3d70217d8834924704aaf839e25d1133312df86848ca1a1
4d14d06fc docs: clarified systemd installation instructions in init.md for Ubuntu users. (DaveFromBinary)
Pull request description:
Added a note to init.md to clarify the .service copy path for Ubuntu because it differs from the described copy path.
Also noted which version of Ubuntu switched to systemd for the default system init to clarify when the systemd installation steps should be used instead of the upstart installation steps for Ubuntu users.
Tree-SHA512: 1ac6143a177d0f3782ff641029d71eb1f3b3be0c1482e266154d3ca093251b58a10a5f037d1cc82dbfaeae058df2bb8e904833ccb88b032f1a59a151724f95e2
fa9461473 [doc] dev-notes: Members should be initialized (MarcoFalke)
Pull request description:
Also, remove mention of threads that were removed long ago.
Motivation:
Make it easier to spot bugs such as #11654 and #12426
Tree-SHA512: 8ca1cb54e830e9368803bd98a8b08c39bf2d46f079094ed7e070b32ae15a6e611ce98d7a614f897803309f4728575e6bc9357fab1157c53d2536417eb8271653
This change should make it easier for users to make complete backups of wallets
because they can now just back up the specified `-wallet=<path>` path directly,
instead of having to back up the specified path as well as the transaction log
directory (for incompletely flushed wallets).
Another advantage of this change is that if two wallets are located in the same
directory, they will now use their own BerkeleyDB environments instead using a
shared environment. Using a shared environment makes it difficult to manage and
back up wallets separately because transaction log files will contain a mix of
data from all wallets in the environment.
Added a note to init.md to clarify the .service copy path for newer versions of Ubuntu because it differs from the described copy path.
Also noted what version of Ubuntu switched to systemd for the default system init.
a777244e4 Build: Add a makefile target for Doxygen documentation (Andrea Comand)
Pull request description:
You can now build the doxygen documentation with `make docs` and clean it with `make clean-docs`.
Fixes: #11949
Tree-SHA512: f2361ec7f771227367dd04bba1a444b44e59f13901463a678a5f2f579a10a56d67db2e29552e754e312a1c472a31593b6af189cbaac5cd351a428c57baf5ace7
9b6454c Improve "Turn Windows Features On or Off" step (Ernest Hemingway)
Pull request description:
Originally, this readme suggests searching for 'turn' to open this dialog but this will not necessarily work on all windows 10 PCs. It's better to use the executable name instead, which is consistent across installations.
Tree-SHA512: e5b95dd69a9a186ea5cd9c7aac2283e77f1857ecf628f8ad6ac0411f362c8aeb52e3bcffb46b90e3bab52f45fa244f269b1777f83d3e0519ac8a95935f7fb5b4
c8edc2c [docs] initial QT documentation, move Qt Creator instructions (Sjors Provoost)
Pull request description:
I'll update this as I figure out how everything is tied together, but I think it's a useful enough start.
Tree-SHA512: d96e5c9ba8ccc3a1b92a0894a8a8449317100eebb14e5d390b51793534458f50eac296cf2945fccf81b85aff23fa32d91d6015a0a76ada4f7091a400d7508ae5
fabb72b contrib: Remove xpired 522739F6 key (MarcoFalke)
faeab66 contrib: Replace developer keys with list of pgp fingerprints (MarcoFalke)
Pull request description:
Having to host a copy of the keys in this repo was a common source of discussion and distraction, caused by problems such as:
* Outdated keys. Unclear whether and when to replace by fresh copies.
* Unclear when to add a key of a new developer or Gitian builder.
The problems are solved by
* Having no keys but only the fingerprints
* Adding a rule of thumb, when to add a new key
<strike>Moving the keys to a different repo solves none of these issues, but since the keys are not bound to releases or git branches of Bitcoin Core, they should live somewhere else.
Obviously, all keys are hosted and distributed on key servers, but were added to the repo solely for convenience and redundancy.
Moving the mirror of those keys to a different repo makes it less distracting to update them -- let's say -- prior to every major release.
I updated our `doc/release-process.md` to reflect the new location.
DEPENDS_ON https://github.com/bitcoin-core/gitian.sigs/pull/621
</strike>
Tree-SHA512: c00795a07603190e26dc4526f6ce11e492fb048dc7ef54b38f859b77dcde25f58ec4449f5cf3f85a5e9c2dd2743bde53f7ff03c8eccf0d75d51784a6b164e47d
eeeb416 Remove suggestion to make cloned repository world-writable for Windows build. (murrayn)
Pull request description:
Current documentation for Windows build on Ubuntu suggests cloning the repository into /usr/src, as root, and making the tree world-writable(!). I can see no problem this solves, and it introduces obvious security issues.
Tree-SHA512: 05429a64319c046f5506f7d27c64c94f94cfe6d14ec5f01dccf843fc417e954fe96e1abc43126b9204a1178f101e4a8da9eece32b5de4b348c7c9358615c7e0f
7444149 Document method for reviewers to verify chainTxData (John Newbery)
Pull request description:
This commit adds the final block hash of the window to getchaintxstats
and documents how reviewers can verify changes to chainTxData.
Tree-SHA512: d16abb5f47d058e52660f4d495f1e453205b1b83716d7c810ff62a70338db721386c1808ec1fc8468f514e4d80cc58e3c96eeb3184cbbcb1d07830fa5e53f342
