77a733a99 [tests] Add additional unit tests for -nofoo edge cases (Anthony Towns)
af173c2be [tests] Check GetChainName works with config entries (Anthony Towns)
fa27f1c23 [tests] Add unit tests for ReadConfigStream (Anthony Towns)
087c5d204 ReadConfigStream: assume the stream is good (Anthony Towns)
6d5815aad Separate out ReadConfigStream from ReadConfigFile (Anthony Towns)
834d30341 [tests] Add unit tests for GetChainName (Anthony Towns)
11b6b5b86 Move ChainNameFromCommandLine into ArgsManager and rename to GetChainName (Anthony Towns)
Pull request description:
This does a bit of refactoring of the configuration handling code in order to add additional tests to make adding support for [test]/[regtest] sections in the config file in #11862 easier. Should not cause any behaviour changes.
Tree-SHA512: 8d2ce1449fc180de03414e7e569d1a21ba1e9f6564e13d3faf3961f710adc725fa0d4ab49b89ebd2baa11ea36ac5018377f693a84037d386a8b8697c9d6db3e9
01189ab9ae build: Show enabled sanitizers in configure output (practicalswift)
Pull request description:
Show enabled sanitizers in `configure` output.
Context: @eklitzke excellent addition of `--with-sanitizers` in #12692
Tree-SHA512: b2d52308e3476488fe47cbc059d7f3235aaeefaa2b987003923f6eaacbadf67f0cf22a32a04873d0f54c1867757841e01c8053f86a4d2f59a407b960ac15105f
0e7c52d Shut down if trying to connect a corrupted block (Suhas Daftuar)
Pull request description:
(Updated OP after reworking the approach)
Shut down if a corrupted block is found in ConnectBlock(). This prevents an infinite loop trying to connect such a block, and alerts the node operator that there may be potential hardware failure.
Tree-SHA512: f20d56aa9d36d6eeff4c3d13c0fbd14f06a57701bd13c2416d36f0cc4235f81f752139e336a073617e8e803782c5096c960108af122b19a51227de512e9095ee
d207207 [logging] add lint-logs.sh to check for newline termination. (John Newbery)
5c21e6c [logging] Comment all continuing logs. (John Newbery)
Pull request description:
Check that all calls to LogPrintf() are terminated by a newline,
except those that are explicitly marked as 'continued' logs.
Tree-SHA512: fe5162b2b2df1e8a4c807da87584fa9af97a6b8377e4090fe0caa136d90bf29a487a123cde94569bdce7101fee3478196d99aa13f1212e24bfe5f41c773604fc
d1b622b tests: Add check for test suite name uniqueness in lint-tests.sh (practicalswift)
dc8067b tests: Add note about uniqueness requirement for test suite names (practicalswift)
3ebfb2d tests: Avoid test suite name collision in wallet crypto_tests (MarcoFalke)
Pull request description:
* Add documentation: Add note about test suite name uniqueness requirement in developer notes
* Add regression test: Update `lint-tests.sh` to make it check also for test suite name uniqueness
Context: #12894 (`tests: Avoid test suite name collision in wallet crypto_tests`)
Tree-SHA512: 3c8502db069ef3d753f534976a86a997b12bac539e808a7285193bf81c9dd8c1b06821c3dd1bdf870ab87722b02c8aa9574c62ace70c2a1b8091785cb8c9aace
d54874d Set SCHED_BATCH priority on the loadblk thread. (Evan Klitzke)
Pull request description:
Today I came across #10271, and while reading the discussion #6358 was linked to. Linux systems have a `SCHED_BATCH` scheduler priority that is useful for threads like loadblk. You can find the full details at [sched(7)](http://man7.org/linux/man-pages/man7/sched.7.html), but I'll quote the relevant part of the man page below:
> ...this policy will cause the scheduler to always assume that the thread is
CPU-intensive. Consequently, the scheduler will apply a small scheduling penalty
with respect to wakeup behavior, so that this thread is mildly disfavored in
scheduling decisions.
>
> This policy is useful for workloads that are noninteractive, but do not want to
lower their nice value, and for workloads that want a deterministic scheduling
policy without interactivity causing extra preemptions (between the workload's
tasks).
I think this change is useful independently of #10271 and irrespective of whether that change is merged. Under normal operation the loadblk thread will just import `mempool.dat`. However, if Bitcoin is started with `-reindex` or `-reindex-chainstate` this thread will use a great deal of CPU while it rebuilds the chainstate database (and the block database in the case of `-reindex`). By setting `SCHED_BATCH` this thread is less likely to interfere with interactive tasks (e.g. the user's web browser, text editor, etc.).
I'm leaving the nice value unchanged (which also affects scheduling decisions) because I think that's better set by the user. Likewise I'm not using [ioprio_set(2)](http://man7.org/linux/man-pages/man2/ioprio_set.2.html) because it can cause the thread to become completely I/O starved (and knowledgeable users can use `ionice(1)` anyway).
Tree-SHA512: ea8f7d3921ed5708948809da771345cdc33efd7ba3323e9dfec07a25bc21e8612e2676f9c178e2710c7bc437e8c9cafc5e0463613688fea5699b6e8e2fec6cff
577f111 Make verify-commits.sh test that merges are clean (Pieter Wuille)
Pull request description:
Unsure if we want this.
This modifies verify-commits.sh to redo all merges along the leftmost commit branch (which includes all PR merges), and verify whether they match the merge commit's trees.
The benefit is that it will detect a case where one of the maintainers merges a PR, but makes an unrelated change inside the merge commit. This on itself is not very strong, as unrelated changes can also be included in the merged branch itself - but perhaps the merge commit is not something that people are otherwise likely to look at.
Fixes#8089
Tree-SHA512: 2c020f5ac3f771ac775aa726832916bb8e03a311b2745d7a9825047239bd0660d838f086f3456f2bb05cea14c1529f74436b8cdd74cc94b70e40b4617309f62c
fafcad3 doc: Add testmempoolaccept to release-notes (MarcoFalke)
Pull request description:
Some fixups for #11742:
* Add release notes for the new rpc
* Fix a typo in the original pull
* Make the mempool reference passed to `CheckInputsFromMempoolAndCache` const, since that function is called before we return from ATMP and we must not modify the mempool.
Tree-SHA512: 72c459ba69f7698a69c91d2592f10f7fb1864846c7d8c525050d48286f92ba5ec5fe554c54235b52fbd9a8f00226c526ad84584641ec39084e1a1310a261510d
Most logs should terminated with a '\n'. Some logs
are built up over multiple calls to logPrintf(), so
do not need a newline terminater. Comment all of
these 'continued' logs as a linter hing.
0314ad4 doc: add qrencode to brew install instructions (buddilla)
Pull request description:
Build was missing qr code(qrencode libs) support and brew team no longer supports anything less than macOS 10.11
Tree-SHA512: 1bc22f02e64f0db0730180ca97fba17c7ad05c9d81c60d1b0d029196d5141e691e524d2df2be1fb89852076f3a252da69bb117042cbd08985b89954432692529
f63bc5e wallet: Initialize m_last_block_processed to nullptr. Initialize fields where defined. (practicalswift)
Pull request description:
Initialize `m_last_block_processed` to `nullptr`.
`m_last_block_processed` was introduced in 5ee3172636.
Tree-SHA512: 6e4a807e5b02115cbd80460761056f2eb22043203212d88dd0cd44c28dc0abce30ab29b078ca2c612232e76af4886f4fdbf2b0ff75e2df19b4d1a801b236cc13
8dd547d82b Adding logging for loop iteration level in p2p_sendheaders.py (ccdle12)
Pull request description:
PR for #12453
New contributor looking at mainly the 'good first issues'.
From my understanding of the issue:
* Track the iteration level of loop when test fails in Travis CI
Further clarification on the issue would be greatly appreciated to narrow down what can be fixed or updated.
Tree-SHA512: 228524aad54c09979d990a0fc6818e13a11e1ab5e78b606b892e897bba7b1e09bf25447feb631049e45ac017eeb61fbf1c1f11e8bd5103648f976a05099ba9f9
55efc1f [tests] simplify binary and hex response parsing in interface_rest.py (Roman Zeyde)
ade5964 [tests] only use 2 nodes in interface_rest.py (John Newbery)
ad00fbe [tests] refactor interface_rest.py to avoid code repetition (John Newbery)
7a3181a [tests] Make json request building more consistent in interface_rest.py (John Newbery)
3fd4490 [tests] improve logging and documentation in interface_rest.py (John Newbery)
abf190e [tests] fix flake8 warnings in interface_rest.py test (John Newbery)
Pull request description:
Following the comment at https://github.com/bitcoin/bitcoin/pull/12717#pullrequestreview-106189117.
Tree-SHA512: b55560f0d8f3069584f5a2398285483a0a23514b2b2bd2c1ced2db1cb30dc24f60f720d0fa4de30259f7918d3178d94680ae9321649544d1d04d687a2e672559
d894894 wallet: Refactor to WalletInitInterface* const g_wallet_init_interface (João Barbosa)
39bc2fa wallet: Make WalletInitInterface and DummyWalletInit private (João Barbosa)
Pull request description:
Implementations of `WalletInitInterface` don't have to be public, so make them private. This makes the interface instantiation static. Also reduces `ENABLE_WALLET` usage and removes the unnecessary `src/wallet/init.h` header.
Tree-SHA512: 203c49d8c85252d1bd0ff1d7ed8bcdc842d12d2d396e965cc70be5c8159a62e98ec23d32d2f3dc48a53e575844130d0a7dedac3cc2fe4621d31319b7a1c9ba89
9960137 Add developer notes about blocking GUI code (Russell Yanofsky)
9a61eed Use WalletBalances struct in Qt (Russell Yanofsky)
56f33ca Remove direct bitcoin calls from qt/sendcoinsdialog.cpp (Russell Yanofsky)
e872c93 Remove direct bitcoin access from qt/guiutil.cpp (Russell Yanofsky)
5884558 Remove direct bitcoin calls from qt transaction table files (Russell Yanofsky)
3cab2ce Remove direct bitcoin calls from qt/paymentserver.cpp (Russell Yanofsky)
3ec2ebc Remove direct bitcoin calls from qt/addresstablemodel.cpp (Russell Yanofsky)
827de03 Remove direct bitcoin calls from qt/coincontroldialog.cpp (Russell Yanofsky)
a0704a8 Remove most direct bitcoin calls from qt/walletmodel.cpp (Russell Yanofsky)
90d4640 Remove direct bitcoin calls from qt/optionsdialog.cpp (Russell Yanofsky)
582daf6 Remove direct bitcoin calls from qt/rpcconsole.cpp (Russell Yanofsky)
3034a46 Remove direct bitcoin calls from qt/bantablemodel.cpp (Russell Yanofsky)
e0b66a3 Remove direct bitcoin calls from qt/peertablemodel.cpp (Russell Yanofsky)
d7c2c95 Remove direct bitcoin calls from qt/intro.cpp (Russell Yanofsky)
fe6f27e Remove direct bitcoin calls from qt/clientmodel.cpp (Russell Yanofsky)
5fba3af Remove direct bitcoin calls from qt/splashscreen.cpp (Russell Yanofsky)
c2f672f Remove direct bitcoin calls from qt/utilitydialog.cpp (Russell Yanofsky)
3d619e9 Remove direct bitcoin calls from qt/bitcoingui.cpp (Russell Yanofsky)
c0f2756 Remove direct bitcoin calls from qt/optionsmodel.cpp (Russell Yanofsky)
71e0d90 Remove direct bitcoin calls from qt/bitcoin.cpp (Russell Yanofsky)
ea73b84 Add src/interface/README.md (Russell Yanofsky)
Pull request description:
This is a refactoring PR that does not change behavior in any way. This change:
1. Creates abstract [`Node`](https://github.com/ryanofsky/bitcoin/blob/pr/ipc-local/src/interface/node.h) and [`Wallet`](https://github.com/ryanofsky/bitcoin/blob/pr/ipc-local/src/interface/wallet.h) interfaces in [`src/interface/`](https://github.com/ryanofsky/bitcoin/tree/pr/ipc-local/src/interface)
1. Updates Qt code to call the new interfaces. This largely consists of diffs of the form:
```diff
- InitLogging();
- InitParameterInteraction();
+ node.initLogging();
+ node.initParameterInteraction();
```
This change allows followup PR #10102 (makes `bitcoin-qt` control `bitcoind` over an IPC socket) to work without any significant updates to Qt code. Additionally:
* It provides a single place to describe the interface between GUI and daemon code.
* It can make better GUI testing possible, because Node and Wallet objects have virtual methods that can be overloaded for mocking.
* It can be used to help make the GUI more responsive (see https://github.com/bitcoin/bitcoin/issues/10504)
Other notes:
* I used python scripts [hide-globals.py](https://github.com/ryanofsky/home/blob/master/src/2017/hide-globals/hide-globals.py) and [replace-syms.py](https://github.com/ryanofsky/home/blob/master/src/2017/hide-globals/replace-syms.py) to identify all the places where Qt code was accessing libbitcoin global variables and calling functions accessing those global variables.
* These changes were originally part of #10102. Thanks to @JeremyRubin for the suggestion of splitting them out.
Commits:
- [`ea73b84d2d` Add src/interface/README.md](ea73b84d2d)
- [`71e0d90876` Remove direct bitcoin calls from qt/bitcoin.cpp](71e0d90876)
- [`c0f2756be5` Remove direct bitcoin calls from qt/optionsmodel.cpp](c0f2756be5)
- [`3d619e9d36` Remove direct bitcoin calls from qt/bitcoingui.cpp](3d619e9d36)
- [`c2f672fb19` Remove direct bitcoin calls from qt/utilitydialog.cpp](c2f672fb19)
- [`5fba3af21e` Remove direct bitcoin calls from qt/splashscreen.cpp](5fba3af21e)
- [`fe6f27e6ea` Remove direct bitcoin calls from qt/clientmodel.cpp](fe6f27e6ea)
- [`d7c2c95948` Remove direct bitcoin calls from qt/intro.cpp](d7c2c95948)
- [`e0b66a3b7c` Remove direct bitcoin calls from qt/peertablemodel.cpp](e0b66a3b7c)
- [`3034a462a5` Remove direct bitcoin calls from qt/bantablemodel.cpp](3034a462a5)
- [`582daf6d22` Remove direct bitcoin calls from qt/rpcconsole.cpp](582daf6d22)
- [`90d4640b7e` Remove direct bitcoin calls from qt/optionsdialog.cpp](90d4640b7e)
- [`a0704a8996` Remove most direct bitcoin calls from qt/walletmodel.cpp](a0704a8996)
- [`827de038ab` Remove direct bitcoin calls from qt/coincontroldialog.cpp](827de038ab)
- [`3ec2ebcd9b` Remove direct bitcoin calls from qt/addresstablemodel.cpp](3ec2ebcd9b)
- [`3cab2ce5f9` Remove direct bitcoin calls from qt/paymentserver.cpp](3cab2ce5f9)
- [`58845587e1` Remove direct bitcoin calls from qt transaction table files](58845587e1)
- [`e872c93ee8` Remove direct bitcoin access from qt/guiutil.cpp](e872c93ee8)
- [`56f33ca349` Remove direct bitcoin calls from qt/sendcoinsdialog.cpp](56f33ca349)
- [`9a61eed1fc` Use WalletBalances struct in Qt](9a61eed1fc)
- [`9960137697` Add developer notes about blocking GUI code](9960137697)
Tree-SHA512: 7b9eff2f37d4ea21972d7cc6a3dbe144248595d6c330524396d867f3cd2841d666cdc040fd3605af559dab51b075812402f61d628d16cf13719335c1d8bf8ed3
a5263fb doc: Use bitcoind in Tor documentation (Indospace.io)
Pull request description:
Tree-SHA512: 9440bb4dc3d4e43332d7e10bbba2fc88ce74f69c17777f5448556d5b0d572e3095fc284c80ba5669e02fa64c5f2fc2b911cc53c33cb67c44334afc405f2b77ba
a5bca13 Bugfix: Include <memory> for std::unique_ptr (Luke Dashjr)
Pull request description:
Not sure why all these includes were missing, but it's breaking builds for some users:
https://bugs.gentoo.org/show_bug.cgi?id=652142
(Added to all files with a reference to `std::unique_ptr`)
Tree-SHA512: 8a2c67513ca07b9bb52c34e8a20b15e56f8af2530310d9ee9b0a69694dd05e02e7a3683f14101a2685d457672b56addec591a0bb83900a0eb8e2a43d43200509
5b10ab0 [trivial] Add newlines to end of log messages. (John Newbery)
Pull request description:
Log messages should terminate with a '\n', or the following log will be
written to the same line without a timestamp. Fix a couple of cases
where the message is not terminated with a \n.
Tree-SHA512: 88677afe85c88ce9f58312430e8881916bd76bbc8cd353ff81c97b3de8356680503160992c0ef3ea192b4694e848e9ca2480dbc38fea1776903b3784497f1af6
BitcoinTestFramework instructs developers in its docstring to override
`set_test_params` and `run_test` in subclasses while being sure NOT to
override `__init__` and `main` . This change adds a metaclass to ensure
that developers adhere to that protocol, raising a ``TypeError`` in
instances where they have not.
closes#12835
9c92c8c827 [tests] Remove Comparison Test Framework (John Newbery)
e80c640d78 [tests] Remove bip9-softforks.py (John Newbery)
Pull request description:
Builds on #11772, #11773 and #11817. Please review those PRs first.
Final step in #10603.
- First commit removes bip9-softforks.py. bip9-sofforks.py was intended to be a generic test for versionbits deployments. However, it only tests CSV activation and was not updated to test segwit activation. CSV activation is tested by bip68-112-113-p2p.py, so this test is duplicated effort. Rather than try to update it to use the BitcoinTestFramework, just remove it. (see https://github.com/btcdrak/bitcoin/pull/8 for previous discussion around the redundancy of bip9-softforks.py)
- Second commit removes the now unused BitcoinComparisonFramework class and the comptool and blockstore modules.
Tree-SHA512: 4bb7196d521048b3b8ba95c87dde73005a1ac73d29ccbb869f11ce9a71089686e7eacd7335337853041dfbd3a5b110172b105adbada58779814d4db22b1376f5
1e747e3c1e Make segwit failure due to CLEANSTACK violation return a SCRIPT_ERR_CLEANSTACK error code. (Mark Friedenbach)
Pull request description:
If a segwit script terminates with a stack size not equal to one, the current error code is EVAL_FALSE. This is semantically wrong, and prevents explicitly checking CLEANSTACK violations in the unit tests. This PR changes the error code (and affected unit tests) to use SCRIPT_ERROR_CLEANSTACK instead of SCRIPT_ERROR_EVAL_FALSE.
Tree-SHA512: 8f7b1650f7a23a942cde1070e3e56420be456b4a7be42515b237e95557bf2bd5e7ba9aabd213c8092bea28c165dbe73f5a3486300089aeb01e698151b42484b1
