bb5b1c0b2d [Docs] upgrade rescan time warning from minutes to >1 hour (Mason Simon)
Pull request description:
When I rescanned just now it took well over an hour. The time warning "may take minutes" didn't prepare me for that.
```
2018-08-08T03:10:17Z [wallet] Still rescanning. At block 174747. Progress=0.008341
2018-08-08T03:11:17Z [wallet] Still rescanning. At block 204233. Progress=0.024533
2018-08-08T03:12:17Z [wallet] Still rescanning. At block 221170. Progress=0.038340
...
2018-08-08T04:16:17Z [wallet] Still rescanning. At block 524815. Progress=0.957105
2018-08-08T04:17:17Z [wallet] Still rescanning. At block 528572. Progress=0.971323
2018-08-08T04:18:17Z [wallet] Still rescanning. At block 532458. Progress=0.986824
```
This is on a 4-core 4ghz system with a 7200rpm drive.
Tree-SHA512: 722ccf566bfd6a3381fa173e08849cb676fe4c1f1cb2c4b86b07df2a5dc1ca0d54797cbe8fd606cdc2c60fef2be7c98e052460decdac2132ba759cff822132e8
227d27e70c Use pushKV in some new PSBT RPCs. (Daniel Kraft)
Pull request description:
Most of the code uses `UniValue::pushKV` where appropriate, but some new RPC code related to PSBTs did not. This fixes those places - after this change, there are no remaining source files I could find that contain `push_back(Pair(`.
Tree-SHA512: d6567cf144d05d7e42276bd66ff4cd44413328f985772d11bb9d7339d32ab7c3438d4bb0040a37e75f8d193c610b08fa971073935885e0a178546aa045daf9fa
1f87c372b5 Simplify comparison in rpc_blockchain.py. (Daniel Kraft)
Pull request description:
The test for `gettxoutsetinfo` in `rpc_blockchain.py` verifies that the result is the same as before after invalidating and reconsidering a block. The comparison has to exclude the `disk_size` field, though, as it is not deterministic.
Instead of comparing all the other fields for equality, this change explicitly removes the `disk_size` field and then compares the full objects. This makes the intent more explicit (compare everything except for `disk_size`, not compare just a given list of fields) and also the code simpler.
Tree-SHA512: 3c376a8836b62988fb2f0117c9ca65de64a33bf3cd4980a123de30bf5e7b7a48eda477b25e03d672ff076e205c698e83432469156caa0f0f3ebbb0480f0dd77d
e254ff5d53 Introduce a maximum size for locators. (Gregory Maxwell)
Pull request description:
The largest sensible size for a locator is log in the number of blocks.
But, as noted by Coinr8d on BCT a maximum size message could encode a
hundred thousand locators. If height were used to limit the messages
that could open new attacks where peers on long low diff forks would
get disconnected and end up stuck.
Ideally, nodes first first learn to limit the size of locators they
send before limiting what would be processed, but common implementations
back off with an exponent of 2 and have an implicit limit of 2^32
blocks, so they already cannot produce locators over some size.
Locators are cheap to process so allowing a few more is harmless,
so this sets the maximum to 64-- which is enough for blockchains
with 2^64 blocks before the get overhead starts increasing.
Tree-SHA512: da28df9c46c988980da861046c62e6e7f93d0eaab3083d32e408d1062f45c00316d5e1754127e808c1feb424fa8e00e5a91aea2cc3b80326b71c148696f7cdb3
With watching only inputs, we do not know how large the signatures
for those inputs will be as their signers may not have implemented
71 byte signatures. Thus we estimate their fees using the 72 byte
dummy signature to ensure that we pay enough fees.
This only effects fundrawtransaction when includeWatching is true.
When extra entropy is not specified by the caller, CKey::Sign will
now always create a signature that has a low R value and is at most
70 bytes. The resulting signature on the stack will be 71 bytes when
the sighash byte is included.
Using low R signatures means that the resulting DER encoded signature
will never need to have additional padding to account for high R
values.
The largest sensible size for a locator is log in the number of blocks.
But, as noted by Coinr8d on BCT a maximum size message could encode a
hundred thousand locators. If height were used to limit the messages
that could open new attacks where peers on long low diff forks would
get disconnected and end up stuck.
Ideally, nodes first first learn to limit the size of locators they
send before limiting what would be processed, but common implementations
back off with an exponent of 2 and have an implicit limit of 2^32
blocks, so they already cannot produce locators over some size.
This sets the limit to an absurdly high amount of 101 in order to
maximize compatibility with existing software.
524b7e36a8 Merge #19: Increase maximum read-only mmap()s used from 1000 to 4096 on 64-bit systems
4874cb8d3e Increase maximum number of read-only mmap()s used from 1000 to 4096 on 64 bit systems.
git-subtree-dir: src/leveldb
git-subtree-split: 524b7e36a8e3bce6fcbcd1b5df09024283f325ba
The test for gettxoutsetinfo in rpc_blockchain.py verifies that the
result is the same as before after invalidating and reconsidering a
block. The comparison has to exclude the 'disk_size' field, though, as
it is not deterministic.
Instead of comparing all the other fields for equality, this change
explicitly removes the 'disk_size' field and then compares the full
objects. This makes the intent more explicit (compare everything except
for disk_size, not compare just a given list of fields) and also the
code simpler.
fa5587fe71 qa: wait_for_verack by default (MarcoFalke)
Pull request description:
This removes the need to do so manually every time a connection is added.
Tree-SHA512: a46c92cb4df41e30778b42b9fd3dcbd8d2d82aa7503d1213cb1c1165034f648d8caee01c292e2d87d05b0f71696996eef5be8a753f35ab49e5f66b0e3bf29f21
faab63111d shutdown: Stop threads before resetting ptrs (MarcoFalke)
Pull request description:
On shutdown some threads would continue to run after or during a pointer reset. This leads to occasional segfaults on shutdown.
Fix this by resetting the smart pointers after all threads that might read from them have been stopped.
This should fix:
* A segfault in the txindex thread, that occurs when the txindex destructor is done, but the thread was not yet stopped (as this is done in the base index destructor)
* A segfault in the scheduler thread, which dereferences conman. (e.g. CheckForStaleTipAndEvictPeers)
Tree-SHA512: abbcf67fadd088e10fe8c384fadfb90bb115d5317145ccb5363603583b320efc18131e46384f55a9bc574969013dfcbd08c49e0d42c004ed7212eca193858ab2
3fc20632a3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28 Regenerate manpages (DrahtBot)
eb7daf4d60 Update copyright headers to 2018 (DrahtBot)
Pull request description:
Some trivial maintenance to avoid having to do it again after the 0.17 branch off.
(The scripts to do this are in `./contrib/`)
Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa
23fbbb100f wallet: sum ancestors rather than taking max in output groups (Karl-Johan Alm)
Pull request description:
This is pointed out in https://github.com/bitcoin/bitcoin/pull/12257#discussion_r204549758.
Basically, the ancestors gives an indication as to how many ancestors the resulting transaction will have, which is more precise when summing up the values, rather than taking the maximum, since all the coins in the group will become ancestors if selected.
Tree-SHA512: 0588c4b6059669650614817e041526a2ab89dda8c07fca8e077c7669dca1fed51cd164f7df56340840ab60285d48f3b140dcee64f64bf696b2dd4ab16d556a13
13bb5cae31 Docs: fix GetWarnings docs to reflect behavior (Ben Woosley)
Pull request description:
In "gui", it returns all warnings, joined by a separator
In "statusbar", it returns the last warning set which seems notionally to be the most important, though that is debatable
Tree-SHA512: 5fc0dc68d143a040b7b893b7176188e2b064c2cf1d559420906e4de636e16e9ab7451a1b87603020a7a8f66d6b94f4ee6c7da2697efad879f9e6de9c0e0c9ac1
faa24441ec policy: Remove promiscuousmempoolflags (MarcoFalke)
Pull request description:
It seems odd to clutter validation code with features that can only ever be used for testing (testnet or regtest). Removing that test-only code makes the mempool logic less painful to understand and easier to reason about when changed or refactored in the future.
Tree-SHA512: 3b897aa9604ac8d82ebe9573c6efd468c93ddaa08d378ebc902e247b7aa6c68fcde71e5b449c08f17a067146cdc66dc50a67ce06d07607c27e5189a49c3fba3f
bcd4b0f5cd Add linting of WalletLogPrintf(...) format strings (practicalswift)
a3e4556949 build: Add format string linter (practicalswift)
Pull request description:
Add format string linter.
This linter checks that the number of arguments passed to each variadic format string function matches the number of format specifiers in the format string.
Example output:
```
$ test/lint/lint-format-strings.sh
src/init.cpp: Expected 2 argument(s) after format string but found 1 argument(s):
LogPrintf("We have a mismatch here: foo=%s bar=%d\n", foo)
src/init.cpp: Expected 1 argument(s) after format string but found 2 argument(s):
LogPrint(BCLog::RPC, "RPC stopped. This is a mismatch: %s\n", s1, s2)
$ echo $?
1
```
Tree-SHA512: 19ab844a63f04bf193d66682ca42745a1c7d6c454b30222491b9fe8dc047054c4a6d3ee7921ec0676fb9ca2e7f6f93bd6c97996fb09667269bd491cb875349f3
93de2891fa wallet: assert to ensure accuracy of CMerkleTx::GetBlocksToMaturity (Ben Woosley)
Pull request description:
According to my understanding, it should not be possible for coinbase
transactions to be conflicting, thus it should not be possible for
GetDepthInMainChain to return a negative result. If it did, this would
also result in innacurate results for GetBlocksToMaturity due to the
math therein. asserting ensures accuracy.
Tree-SHA512: 8e71c26f09fe457cfb00c362ca27066f7f018ea2af1f395090fdc7fd9f5964b76f4317c23f7a4923776f00087558511da5c1c368095be39fb1bacc614a93c32f
This linter checks that the number of arguments passed to each variadic format
string function matches the number of format specifiers in the format string.
a9e898a4ad docs: Link to python style guidelines from developer notes (Mason Simon)
Pull request description:
Initially I moved the python style guidelines from the functional test README, but some of the python rules are test-specific, and most of the developer notes doc is C++ centric, so just dropping a link seemed better.
Tree-SHA512: 9d4d5cc45526319a118595d90fcfad2c9aced22007aa096d8af04ba1b963312822804f4c15b0b227d66af49565034437691b7760e7ff6d1e3f8b10b898906362
a1a998cf24 wallet: Fix backupwallet for multiwallets (Daniel Kraft)
Pull request description:
`backupwallet` was broken for multiwallets in their own directories (i.e. something like `DATADIR/wallets/mywallet/wallet.dat`). In this case, the backup would use `DATADIR/wallets/wallet.dat` as source file and not take the specific wallet's directory into account.
This led to either an error during the backup (if the wrong source file was not present) or would silently back up the wrong wallet; especially the latter behaviour can be quite bad for users.
Tree-SHA512: 7efe2450ca047e40719fcc7cc211ed94699056020ac737cada7b59e8240298675960570c45079add424d0aab520437d5050d956acd695a9c2452dd4317b4d2c4
909f54c80a [wallet] Add wallet name to log messages (Pierre Rochard)
Pull request description:
After multiple wallets became supported, wallet-related log messages became ambiguous as to which wallet they were being emitted by.
This pull request adds a `CWallet::WalletLogPrintf` function to be used when logging wallet-specific events. This function prepends the wallet's name to the log message and forwards it to `LogPrintf`
fixes#11317
Tree-SHA512: d258dcc9aa0f1330159bc66b4020f84709c5bba5165bdc62503543557d8999777f0b94a7a82a08823e2b2ceb84f4f8d1cd5493f99c076a13539f1f6155dc55ad
5e17777777 qa: Create unicode tempdir in test_runner (MarcoFalke)
Pull request description:
Now that wallet filenames are properly quoted when used for rpc (#13823), we can add some unicode symbols to the test_runner path. Thus, the "extern" wallet that uses a full path has a unicode symbol in its name.
Should add unicode coverage to
* `listwallets`
* `wallet.getwalletinfo`
* `(un)loadwallet`
Tree-SHA512: 1633fde56f8748df0cfef9c31a878c105dfaac85d1041b292261f44c4d40e96942aacbf7d6e839e8bbf979dc131d81c24ceb521e927fc8a5a71ba093f36b891b
00db418176 Add aarch64 qt depends support for cross compiling bitcoin-qt (TheCharlatan)
Pull request description:
This also adds a generic qt linux target in packages.mk . I am a bit confused by the existing docs for the RISC addition. Are there boards that would support running bitcoin-qt, or at the very least forwarding X over ssh? Is everybody building depends with `NO_QT=1` when targeting RISC? If not, I will revert the change for a generic qt linux package definition back to the piecemeal solution.
This pull request should close#13495
Tree-SHA512: 519b951bf50f214ad725e5330094582a212333cd85b0ae442c67f9afec5629995dfad130258c7706a61f7b7cccbfa49bce69b9931f7e30cf12b382cd9a0a4749
This commit slightly changes the format of the "Usage" strings in CLI
`-help` messages to meet the expection of the help2man tool, which we
use to generate man pages. On the way, we remove a few calls to
`strprintf()`, which became superficial after commit 32fbfda.
