diff --git a/README.md b/README.md
new file mode 100644
index 0000000..6356b4e
--- /dev/null
+++ b/README.md
@@ -0,0 +1,15 @@
+# DP-aux emulator
+
+Hardware design files for a DP-aux emulation board, designed to allow connection of PSVR2 headsets to PC.
+
+![(Rendered image using Kicad2blender plugin)](render.png)
+
+Prior to a March 2024 update of the PSVR2's firmware, the headset reported incorrect information via DP-aux, among others the EDID and DSC capability. A custom EDID can be set without additional hardware, however DSC options cannot - so the emulator board was born.
+
+On the PCB is an RP2040 microcontroller, which decides which DP-aux requests to modify and which to pass through unchanged. To do so, a pair of SN65MLVD200A differential transceivers are used. The LVDS part of the circuit is based on [Bitec's DisplayPort Daughter Card](https://bitec-dsp.com/wp-content/uploads/2023/03/bitec_fmc_dp_rev12_sch.pdf), however, I believe my voltage divider is closer to correct for this specific chip.
+
+Apart from the core DP-aux emulation circuitry, there is a programming micro-USB connector (I would have used a USB-C, but this way it cannot be confused with the PSVR2 port), orientation detection using USB-C CC pins, and a power section, allowing the board to be powered with either the programming USB port or using VBUS from the USB-Cs. Even though the board was made with specifically the PSVR2 in mind, I tried to make it as compliant as possible with a low part count and it should work well with the maximum voltage of USB-PD3.0, 21V.
+
+Firmware for it was written by the autor of the iVRy SteamVR driver, a passthrough-only version of the firmware is provided in this repository for testing.
+
+As of March 2024, after the update, this board is only needed for using Nvidia boards with 3rd party PSVR2 drivers. This board only modifies DP-aux traffic, it doesn't help with connecting a PSVR2 to a card without a USB-C, for an adapter for such GPUs, check out [Swyter's project](https://github.com/Swyter/psdaptwor), but note that it hasn't been tested yet.
\ No newline at end of file
diff --git a/passthrough_firmware.uf2 b/passthrough_firmware.uf2
new file mode 100644
index 0000000..3a14e07
Binary files /dev/null and b/passthrough_firmware.uf2 differ
diff --git a/render.png b/render.png
new file mode 100644
index 0000000..34a99ac
Binary files /dev/null and b/render.png differ