rocksdb #29
|
@ -725,6 +725,79 @@ type RepostValue struct {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
RepostedClaimHash []byte `json:"reposted_claim_hash"`
|
RepostedClaimHash []byte `json:"reposted_claim_hash"`
|
||||||
}
|
}
|
||||||
|
|
||||||
|
func (k *RepostKey) PackKey() []byte {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
prefixLen := 1
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
// b'>20s'
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
n := prefixLen + 20
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
key := make([]byte, n)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
copy(key, k.Prefix)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
copy(key[prefixLen:], k.ClaimHash)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
return key
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
func (v *RepostValue) PackValue() []byte {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
// FIXME: Is there a limit to this length?
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
n := len(v.RepostedClaimHash)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
value := make([]byte, n)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
copy(value, v.RepostedClaimHash)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
return value
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
func RepostKeyPackPartialNFields(nFields int) func(*RepostKey) []byte {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
return func(u *RepostKey) []byte {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
return RepostKeyPackPartial(u, nFields)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
func RepostKeyPackPartial(k *RepostKey, nFields int) []byte {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
// Limit nFields between 0 and number of fields, we always at least need
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
// the prefix, and we never need to iterate past the number of fields.
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
if nFields > 1 {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
nFields = 1
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
if nFields < 0 {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
nFields = 0
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
prefixLen := 1
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
var n = prefixLen
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
for i := 0; i <= nFields; i++ {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
switch i {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
case 1:
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
n += 20
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
key := make([]byte, n)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
for i := 0; i <= nFields; i++ {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
switch i {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
case 0:
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
copy(key, k.Prefix)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
case 1:
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
copy(key[prefixLen:], k.ClaimHash)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
return key
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
func RepostKeyUnpack(key []byte) *RepostKey {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
prefixLen := 1
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
return &RepostKey{
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
Prefix: key[:prefixLen],
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
ClaimHash: key[prefixLen : prefixLen+20],
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
func RepostValueUnpack(value []byte) *RepostValue {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
return &RepostValue{
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
RepostedClaimHash: value[:],
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
}
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
/*
|
/*
|
||||||
|
|
||||||
class RepostedKey(typing.NamedTuple):
|
class RepostedKey(typing.NamedTuple):
|
||||||
|
@ -824,11 +897,12 @@ func RepostedKeyPackPartial(k *RepostedKey, nFields int) []byte {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
}
|
}
|
||||||
|
|
||||||
func RepostedKeyUnpack(key []byte) *RepostedKey {
|
func RepostedKeyUnpack(key []byte) *RepostedKey {
|
||||||
|
prefixLen := 1
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
return &RepostedKey{
|
return &RepostedKey{
|
||||||
Prefix: key[:1],
|
Prefix: key[:prefixLen],
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
RepostedClaimHash: key[1:21],
|
RepostedClaimHash: key[prefixLen : prefixLen+20],
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
TxNum: binary.BigEndian.Uint32(key[21:]),
|
TxNum: binary.BigEndian.Uint32(key[prefixLen+20:]),
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
Position: binary.BigEndian.Uint16(key[25:]),
|
Position: binary.BigEndian.Uint16(key[prefixLen+24:]),
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -988,9 +1062,10 @@ func TouchedOrDeletedClaimKeyPackPartial(k *TouchedOrDeletedClaimKey, nFields in
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
}
|
}
|
||||||
|
|
||||||
func TouchedOrDeletedClaimKeyUnpack(key []byte) *TouchedOrDeletedClaimKey {
|
func TouchedOrDeletedClaimKeyUnpack(key []byte) *TouchedOrDeletedClaimKey {
|
||||||
|
prefixLen := 1
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
return &TouchedOrDeletedClaimKey{
|
return &TouchedOrDeletedClaimKey{
|
||||||
Prefix: key[:1],
|
Prefix: key[:prefixLen],
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
Height: int32(binary.BigEndian.Uint32(key[1:])),
|
Height: int32(binary.BigEndian.Uint32(key[prefixLen:])),
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -1108,11 +1183,12 @@ func HashXUTXOKeyPackPartial(k *HashXUTXOKey, nFields int) []byte {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
}
|
}
|
||||||
|
|
||||||
func HashXUTXOKeyUnpack(key []byte) *HashXUTXOKey {
|
func HashXUTXOKeyUnpack(key []byte) *HashXUTXOKey {
|
||||||
|
prefixLen := 1
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
return &HashXUTXOKey{
|
return &HashXUTXOKey{
|
||||||
Prefix: key[:1],
|
Prefix: key[:prefixLen],
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
ShortTXHash: key[1:5],
|
ShortTXHash: key[prefixLen : prefixLen+4],
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
TxNum: binary.BigEndian.Uint32(key[5:]),
|
TxNum: binary.BigEndian.Uint32(key[prefixLen+4:]),
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
Nout: binary.BigEndian.Uint16(key[9:]),
|
Nout: binary.BigEndian.Uint16(key[prefixLen+8:]),
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -1208,11 +1284,12 @@ func UTXOKeyPackPartial(k *UTXOKey, nFields int) []byte {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
}
|
}
|
||||||
|
|
||||||
func UTXOKeyUnpack(key []byte) *UTXOKey {
|
func UTXOKeyUnpack(key []byte) *UTXOKey {
|
||||||
|
prefixLen := 1
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
return &UTXOKey{
|
return &UTXOKey{
|
||||||
Prefix: key[:1],
|
Prefix: key[:prefixLen],
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
HashX: key[1:12],
|
HashX: key[prefixLen : prefixLen+11],
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
TxNum: binary.BigEndian.Uint32(key[12:]),
|
TxNum: binary.BigEndian.Uint32(key[prefixLen+11:]),
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
Nout: binary.BigEndian.Uint16(key[16:]),
|
Nout: binary.BigEndian.Uint16(key[prefixLen+15:]),
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -1245,9 +1322,10 @@ func UnpackGenericKey(key []byte) (byte, interface{}, error) {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
case PendingActivation:
|
case PendingActivation:
|
||||||
case ActivatedClaimAndSupport:
|
case ActivatedClaimAndSupport:
|
||||||
case ActiveAmount:
|
case ActiveAmount:
|
||||||
|
return 0x0, nil, errors.Base("key unpack function for %v not implemented", firstByte)
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
case Repost:
|
case Repost:
|
||||||
return 0x0, nil, errors.Base("key unpack function for %v not implemented", firstByte)
|
return Repost, RepostKeyUnpack(key), nil
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
case RepostedClaim:
|
case RepostedClaim:
|
||||||
return RepostedClaim, RepostedKeyUnpack(key), nil
|
return RepostedClaim, RepostedKeyUnpack(key), nil
|
||||||
|
|
||||||
|
@ -1303,9 +1381,10 @@ func UnpackGenericValue(key, value []byte) (byte, interface{}, error) {
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
case PendingActivation:
|
case PendingActivation:
|
||||||
case ActivatedClaimAndSupport:
|
case ActivatedClaimAndSupport:
|
||||||
case ActiveAmount:
|
case ActiveAmount:
|
||||||
|
return 0x0, nil, nil
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
|
|
||||||
case Repost:
|
case Repost:
|
||||||
return 0x0, nil, nil
|
return Repost, RepostValueUnpack(value), nil
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|||||||
case RepostedClaim:
|
case RepostedClaim:
|
||||||
return RepostedClaim, RepostedValueUnpack(value), nil
|
return RepostedClaim, RepostedValueUnpack(value), nil
|
||||||
|
|
||||||
|
|
||||||
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
![]() why snake case here? why snake case here?
![]() if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
![]() i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|
@ -14,10 +14,7 @@ import (
|
||||||
"github.com/linxGnu/grocksdb"
|
"github.com/linxGnu/grocksdb"
|
||||||
)
|
)
|
||||||
|
|
||||||
func TestRepostedClaim(t *testing.T) {
|
func testInit(filePath string) (*grocksdb.DB, [][]string, func()) {
|
||||||
|
|
||||||
filePath := "../../resources/reposted_claim.csv"
|
|
||||||
|
|
||||||
log.Println(filePath)
|
log.Println(filePath)
|
||||||
file, err := os.Open(filePath)
|
file, err := os.Open(filePath)
|
||||||
if err != nil {
|
if err != nil {
|
||||||
|
@ -29,20 +26,107 @@ func TestRepostedClaim(t *testing.T) {
|
||||||
log.Println(err)
|
log.Println(err)
|
||||||
}
|
}
|
||||||
|
|
||||||
wOpts := grocksdb.NewDefaultWriteOptions()
|
// wOpts := grocksdb.NewDefaultWriteOptions()
|
||||||
opts := grocksdb.NewDefaultOptions()
|
opts := grocksdb.NewDefaultOptions()
|
||||||
opts.SetCreateIfMissing(true)
|
opts.SetCreateIfMissing(true)
|
||||||
db, err := grocksdb.OpenDb(opts, "tmp")
|
db, err := grocksdb.OpenDb(opts, "tmp")
|
||||||
if err != nil {
|
if err != nil {
|
||||||
log.Println(err)
|
log.Println(err)
|
||||||
}
|
}
|
||||||
defer func() {
|
toDefer := func() {
|
||||||
db.Close()
|
db.Close()
|
||||||
err = os.RemoveAll("./tmp")
|
err = os.RemoveAll("./tmp")
|
||||||
if err != nil {
|
if err != nil {
|
||||||
log.Println(err)
|
log.Println(err)
|
||||||
}
|
}
|
||||||
}()
|
}
|
||||||
|
|
||||||
|
return db, records, toDefer
|
||||||
|
}
|
||||||
|
|
||||||
|
func TestRepost(t *testing.T) {
|
||||||
|
|
||||||
|
filePath := "../../resources/repost.csv"
|
||||||
|
|
||||||
|
wOpts := grocksdb.NewDefaultWriteOptions()
|
||||||
|
db, records, toDefer := testInit(filePath)
|
||||||
|
defer toDefer()
|
||||||
|
for _, record := range records {
|
||||||
|
key, err := hex.DecodeString(record[0])
|
||||||
|
if err != nil {
|
||||||
|
log.Println(err)
|
||||||
|
}
|
||||||
|
val, err := hex.DecodeString(record[1])
|
||||||
|
if err != nil {
|
||||||
|
log.Println(err)
|
||||||
|
}
|
||||||
|
db.Put(wOpts, key, val)
|
||||||
|
}
|
||||||
|
// test prefix
|
||||||
|
options := dbpkg.NewIterateOptions().WithPrefix([]byte{prefixes.Repost}).WithIncludeValue(true)
|
||||||
|
ch := dbpkg.Iter(db, options)
|
||||||
|
var i = 0
|
||||||
|
for kv := range ch {
|
||||||
|
// log.Println(kv.Key)
|
||||||
|
gotKey := kv.Key.(*prefixes.RepostKey).PackKey()
|
||||||
|
|
||||||
|
keyPartial1 := prefixes.RepostKeyPackPartial(kv.Key.(*prefixes.RepostKey), 1)
|
||||||
|
|
||||||
|
// Check pack partial for sanity
|
||||||
|
if !bytes.HasPrefix(gotKey, keyPartial1) {
|
||||||
|
t.Errorf("%+v should be prefix of %+v\n", keyPartial1, gotKey)
|
||||||
|
}
|
||||||
|
|
||||||
|
got := kv.Value.(*prefixes.RepostValue).PackValue()
|
||||||
|
wantKey, err := hex.DecodeString(records[i][0])
|
||||||
|
if err != nil {
|
||||||
|
log.Println(err)
|
||||||
|
}
|
||||||
|
want, err := hex.DecodeString(records[i][1])
|
||||||
|
if err != nil {
|
||||||
|
log.Println(err)
|
||||||
|
}
|
||||||
|
if !bytes.Equal(gotKey, wantKey) {
|
||||||
|
t.Errorf("gotKey: %+v, wantKey: %+v\n", got, want)
|
||||||
|
}
|
||||||
|
if !bytes.Equal(got, want) {
|
||||||
|
t.Errorf("got: %+v, want: %+v\n", got, want)
|
||||||
|
}
|
||||||
|
i++
|
||||||
|
}
|
||||||
|
|
||||||
|
// Test start / stop
|
||||||
|
start, err := hex.DecodeString(records[0][0])
|
||||||
|
if err != nil {
|
||||||
|
log.Println(err)
|
||||||
|
}
|
||||||
|
stop, err := hex.DecodeString(records[9][0])
|
||||||
|
if err != nil {
|
||||||
|
log.Println(err)
|
||||||
|
}
|
||||||
|
options2 := dbpkg.NewIterateOptions().WithStart(start).WithStop(stop).WithIncludeValue(true)
|
||||||
|
ch2 := dbpkg.Iter(db, options2)
|
||||||
|
i = 0
|
||||||
|
for kv := range ch2 {
|
||||||
|
got := kv.Value.(*prefixes.RepostValue).PackValue()
|
||||||
|
want, err := hex.DecodeString(records[i][1])
|
||||||
|
if err != nil {
|
||||||
|
log.Println(err)
|
||||||
|
}
|
||||||
|
if !bytes.Equal(got, want) {
|
||||||
|
t.Errorf("got: %+v, want: %+v\n", got, want)
|
||||||
|
}
|
||||||
|
i++
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
func TestRepostedClaim(t *testing.T) {
|
||||||
|
|
||||||
|
filePath := "../../resources/reposted_claim.csv"
|
||||||
|
|
||||||
|
wOpts := grocksdb.NewDefaultWriteOptions()
|
||||||
|
db, records, toDefer := testInit(filePath)
|
||||||
|
defer toDefer()
|
||||||
for _, record := range records {
|
for _, record := range records {
|
||||||
key, err := hex.DecodeString(record[0])
|
key, err := hex.DecodeString(record[0])
|
||||||
if err != nil {
|
if err != nil {
|
||||||
|
|
35
main.go
|
@ -31,7 +31,6 @@ func main() {
|
||||||
|
|
||||||
return
|
return
|
||||||
} else if args.CmdType == server.DBCmd {
|
} else if args.CmdType == server.DBCmd {
|
||||||
//dbVal, err := db.GetDB("./resources/asdf.db")
|
|
||||||
dbVal, err := db.GetDB("/mnt/d/data/wallet/lbry-rocksdb/")
|
dbVal, err := db.GetDB("/mnt/d/data/wallet/lbry-rocksdb/")
|
||||||
if err != nil {
|
if err != nil {
|
||||||
log.Fatalln(err)
|
log.Fatalln(err)
|
||||||
|
@ -39,7 +38,7 @@ func main() {
|
||||||
|
|
||||||
options := &db.IterOptions{
|
options := &db.IterOptions{
|
||||||
FillCache: false,
|
FillCache: false,
|
||||||
Prefix: []byte{prefixes.ClaimDiff},
|
Prefix: []byte{prefixes.Repost},
|
||||||
Start: nil,
|
Start: nil,
|
||||||
Stop: nil,
|
Stop: nil,
|
||||||
IncludeStart: true,
|
IncludeStart: true,
|
||||||
|
@ -50,37 +49,7 @@ func main() {
|
||||||
RawValue: true,
|
RawValue: true,
|
||||||
}
|
}
|
||||||
|
|
||||||
db.ReadWriteRawN(dbVal, options, "./resources/claim_diff.csv", 10)
|
db.ReadWriteRawN(dbVal, options, "./resources/repost.csv", 10)
|
||||||
|
|
||||||
// b, err := hex.DecodeString("000013")
|
|
||||||
// if err != nil {
|
|
||||||
// log.Println(err)
|
|
||||||
// }
|
|
||||||
// stopKey := &prefixes.UTXOKey{
|
|
||||||
// Prefix: []byte{prefixes.UTXO},
|
|
||||||
// HashX: b,
|
|
||||||
// TxNum: 0,
|
|
||||||
// Nout: 0,
|
|
||||||
// }
|
|
||||||
// stop := prefixes.UTXOKeyPackPartial(stopKey, 1)
|
|
||||||
|
|
||||||
// log.Println(stop)
|
|
||||||
// log.Print(hex.EncodeToString(stop))
|
|
||||||
|
|
||||||
// options := &db.IterOptions{
|
|
||||||
// FillCache: false,
|
|
||||||
// Prefix: []byte{prefixes.UTXO},
|
|
||||||
// Start: nil,
|
|
||||||
// Stop: stop,
|
|
||||||
// IncludeStart: true,
|
|
||||||
// IncludeStop: false,
|
|
||||||
// IncludeKey: true,
|
|
||||||
// IncludeValue: true,
|
|
||||||
// RawKey: false,
|
|
||||||
// RawValue: false,
|
|
||||||
// }
|
|
||||||
|
|
||||||
// db.OpenAndWriteDB(dbVal, options, "./resources/asdf2.db")
|
|
||||||
|
|
||||||
return
|
return
|
||||||
}
|
}
|
||||||
|
|
10
resources/repost.csv
Normal file
|
@ -0,0 +1,10 @@
|
||||||
|
56000009ca6e0caaaef16872b4bd4f6f1b8c2363e2,dbdfb6cd5e83baf342eaab8b19662ed0c71aae9a
|
||||||
|
56000011884f49bd8fcd16444dd44452a4e007f156,799c1f31da3021972570a9fafaa838fec36aecc4
|
||||||
|
560000140cfb01f26c9177e99831ef05b61981852a,0f7f89b3fd788c928104fa7406b8c34c77edaba4
|
||||||
|
56000014f799144c6cbadef2a3cc28552dc6cf8539,8fefe443580aee599c5450bfd422eed78091115c
|
||||||
|
560000158cc5d5817bbe2dae2e97d569d2e812f310,a1a3fd82cfec76e34ab2467b5988c5e195c47de6
|
||||||
|
5600005491516e90167b54f346ab2325d422445b60,865ff83242498653f8a088f1755a4fb116fbe39c
|
||||||
|
56000080a0497721b900a1896c209b16ae9d74645d,d2fc2d13cce02143549e27fbb459380af3fa04a9
|
||||||
|
560000843de01218f5bc2baa62f6e8891f2d5a31cd,47ec6edb8178816a6e0dca4db5a8c14be04b0869
|
||||||
|
560000882f6d62f74883ec7fd594b2a723071709b8,a4bce36b4c341e046068c72f53bbf55914304ba1
|
||||||
|
560000981099ab4955195aed48a5bf2aa6e80dbbff,4153e0b9d207cfc9a871c1679d41347cf55bdfab
|
|
why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.