rocksdb #29
|
@ -555,7 +555,7 @@ type ClaimTakeoverKey struct {
|
|||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
type ClaimTakeoverValue struct {
|
||||
ClaimHash []byte `json:"claim_hash"`
|
||||
Height int32 `json:"height"`
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Height uint32 `json:"height"`
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
func (v *ClaimTakeoverValue) String() string {
|
||||
|
@ -567,6 +567,84 @@ func (v *ClaimTakeoverValue) String() string {
|
|||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
)
|
||||
}
|
||||
|
||||
func (k *ClaimTakeoverKey) PackKey() []byte {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
prefixLen := 1
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
nameLen := len(k.NormalizedName)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
n := prefixLen + 2 + nameLen
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
key := make([]byte, n)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
copy(key, k.Prefix)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
binary.BigEndian.PutUint16(key[prefixLen:], uint16(nameLen))
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
copy(key[prefixLen+2:], []byte(k.NormalizedName))
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
return key
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
func (v *ClaimTakeoverValue) PackValue() []byte {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
// b'>20sL'
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
value := make([]byte, 24)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
copy(value, v.ClaimHash[:20])
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
binary.BigEndian.PutUint32(value[20:], uint32(v.Height))
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
return value
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
func ClaimTakeoverKeyPackPartialNFields(nFields int) func(*ClaimTakeoverKey) []byte {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
return func(u *ClaimTakeoverKey) []byte {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
return ClaimTakeoverKeyPackPartial(u, nFields)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
func ClaimTakeoverKeyPackPartial(k *ClaimTakeoverKey, nFields int) []byte {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
// Limit nFields between 0 and number of fields, we always at least need
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
// the prefix, and we never need to iterate past the number of fields.
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
if nFields > 1 {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
nFields = 1
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
if nFields < 0 {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
nFields = 0
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
prefixLen := 1
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
nameLen := len(k.NormalizedName)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
var n = prefixLen
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
for i := 0; i <= nFields; i++ {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
switch i {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
case 1:
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
n += 2 + nameLen
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
key := make([]byte, n)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
for i := 0; i <= nFields; i++ {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
switch i {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
case 0:
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
copy(key, k.Prefix)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
case 1:
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
binary.BigEndian.PutUint16(key[prefixLen:], uint16(nameLen))
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
copy(key[prefixLen+2:], []byte(k.NormalizedName))
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
return key
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
func ClaimTakeoverKeyUnpack(key []byte) *ClaimTakeoverKey {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
prefixLen := 1
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
nameLen := binary.BigEndian.Uint16(key[prefixLen:])
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
return &ClaimTakeoverKey{
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Prefix: key[:prefixLen],
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
NormalizedName: string(key[prefixLen+2 : prefixLen+2+int(nameLen)]),
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
func ClaimTakeoverValueUnpack(value []byte) *ClaimTakeoverValue {
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
return &ClaimTakeoverValue{
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
ClaimHash: value[:20],
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Height: binary.BigEndian.Uint32(value[20:]),
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
/*
|
||||
|
||||
class PendingActivationKey(typing.NamedTuple):
|
||||
|
@ -1706,9 +1784,10 @@ func UnpackGenericKey(key []byte) (byte, interface{}, error) {
|
|||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
case EffectiveAmount:
|
||||
return EffectiveAmount, EffectiveAmountKeyUnpack(key), nil
|
||||
case ClaimExpiration:
|
||||
return 0x0, nil, errors.Base("key unpack function for %v not implemented", firstByte)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
case ClaimTakeover:
|
||||
return 0x0, nil, errors.Base("key unpack function for %v not implemented", firstByte)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
return ClaimTakeover, ClaimTakeoverKeyUnpack(key), nil
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
case PendingActivation:
|
||||
return PendingActivation, PendingActivationKeyUnpack(key), nil
|
||||
case ActivatedClaimAndSupport:
|
||||
|
@ -1770,9 +1849,10 @@ func UnpackGenericValue(key, value []byte) (byte, interface{}, error) {
|
|||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
case EffectiveAmount:
|
||||
return EffectiveAmount, EffectiveAmountValueUnpack(value), nil
|
||||
case ClaimExpiration:
|
||||
return 0x0, nil, errors.Base("value unpack not implemented for key %v", key)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
case ClaimTakeover:
|
||||
return 0x0, nil, errors.Base("value unpack not implemented for key %v", key)
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
return ClaimTakeover, ClaimTakeoverValueUnpack(value), nil
|
||||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
case PendingActivation:
|
||||
return PendingActivation, PendingActivationValueUnpack(value), nil
|
||||
case ActivatedClaimAndSupport:
|
||||
|
|
|||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
|
@ -44,6 +44,82 @@ func testInit(filePath string) (*grocksdb.DB, [][]string, func()) {
|
|||
return db, records, toDefer
|
||||
}
|
||||
|
||||
func TestClaimTakeover(t *testing.T) {
|
||||
|
||||
filePath := "../../resources/claim_takeover.csv"
|
||||
|
||||
wOpts := grocksdb.NewDefaultWriteOptions()
|
||||
db, records, toDefer := testInit(filePath)
|
||||
defer toDefer()
|
||||
for _, record := range records {
|
||||
key, err := hex.DecodeString(record[0])
|
||||
if err != nil {
|
||||
log.Println(err)
|
||||
}
|
||||
val, err := hex.DecodeString(record[1])
|
||||
if err != nil {
|
||||
log.Println(err)
|
||||
}
|
||||
db.Put(wOpts, key, val)
|
||||
}
|
||||
// test prefix
|
||||
options := dbpkg.NewIterateOptions().WithPrefix([]byte{prefixes.ClaimTakeover}).WithIncludeValue(true)
|
||||
ch := dbpkg.Iter(db, options)
|
||||
var i = 0
|
||||
for kv := range ch {
|
||||
// log.Println(kv.Key)
|
||||
gotKey := kv.Key.(*prefixes.ClaimTakeoverKey).PackKey()
|
||||
|
||||
keyPartial1 := prefixes.ClaimTakeoverKeyPackPartial(kv.Key.(*prefixes.ClaimTakeoverKey), 1)
|
||||
|
||||
// Check pack partial for sanity
|
||||
if !bytes.HasPrefix(gotKey, keyPartial1) {
|
||||
t.Errorf("%+v should be prefix of %+v\n", keyPartial1, gotKey)
|
||||
}
|
||||
|
||||
got := kv.Value.(*prefixes.ClaimTakeoverValue).PackValue()
|
||||
wantKey, err := hex.DecodeString(records[i][0])
|
||||
if err != nil {
|
||||
log.Println(err)
|
||||
}
|
||||
want, err := hex.DecodeString(records[i][1])
|
||||
if err != nil {
|
||||
log.Println(err)
|
||||
}
|
||||
if !bytes.Equal(gotKey, wantKey) {
|
||||
t.Errorf("gotKey: %+v, wantKey: %+v\n", got, want)
|
||||
}
|
||||
if !bytes.Equal(got, want) {
|
||||
t.Errorf("got: %+v, want: %+v\n", got, want)
|
||||
}
|
||||
i++
|
||||
}
|
||||
|
||||
// Test start / stop
|
||||
start, err := hex.DecodeString(records[0][0])
|
||||
if err != nil {
|
||||
log.Println(err)
|
||||
}
|
||||
stop, err := hex.DecodeString(records[9][0])
|
||||
if err != nil {
|
||||
log.Println(err)
|
||||
}
|
||||
options2 := dbpkg.NewIterateOptions().WithStart(start).WithStop(stop).WithIncludeValue(true)
|
||||
ch2 := dbpkg.Iter(db, options2)
|
||||
i = 0
|
||||
for kv := range ch2 {
|
||||
got := kv.Value.(*prefixes.ClaimTakeoverValue).PackValue()
|
||||
want, err := hex.DecodeString(records[i][1])
|
||||
if err != nil {
|
||||
log.Println(err)
|
||||
}
|
||||
if !bytes.Equal(got, want) {
|
||||
t.Errorf("got: %+v, want: %+v\n", got, want)
|
||||
}
|
||||
i++
|
||||
}
|
||||
}
|
||||
|
||||
func TestPendingActivation(t *testing.T) {
|
||||
|
||||
filePath := "../../resources/pending_activation.csv"
|
||||
|
|
4
main.go
|
@ -38,7 +38,7 @@ func main() {
|
|||
|
||||
options := &db.IterOptions{
|
||||
FillCache: false,
|
||||
Prefix: []byte{prefixes.PendingActivation},
|
||||
Prefix: []byte{prefixes.ClaimTakeover},
|
||||
Start: nil,
|
||||
Stop: nil,
|
||||
IncludeStart: true,
|
||||
|
@ -49,7 +49,7 @@ func main() {
|
|||
RawValue: true,
|
||||
}
|
||||
|
||||
db.ReadWriteRawN(dbVal, options, "./resources/pending_activation.csv", 10)
|
||||
db.ReadWriteRawN(dbVal, options, "./resources/claim_takeover.csv", 10)
|
||||
|
||||
return
|
||||
}
|
||||
|
|
10
resources/claim_takeover.csv
Normal file
|
@ -0,0 +1,10 @@
|
|||
50000100,a51d5c567412654e6d741114fea6fb851dec73800004831f
|
||||
50000101,11158037afca9c2efabc3dff55e352bf1f5634c50004831f
|
||||
50000102,a4a575934de77d8ec8589595d8cd91857e3cf5ba0004831f
|
||||
50000103,f595a21fb597bd030defefda3df9f8f4a3e0cb860004831f
|
||||
50000104,682ccb0518a6bd00c955949d9ef330d3ac18cb800004831f
|
||||
50000105,078a435851bf97c5cc36e8b03e3208a30d27679f0004831f
|
||||
50000106,1a4a75246a766cf21a629f619bc5bcb531de7a5a0004831f
|
||||
50000107,b144ad496b29b9c12c316f319773adcdd4c9bce20004831f
|
||||
50000108,af2a09232fc6bf664088d65da42fe0345b4589600004831f
|
||||
50000109,7b2ab15758c519116fb9ba9331a3b9ee7530831f0004831f
|
|
why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.