rocksdb #29
|
|
@ -18,6 +18,7 @@ import (
|
|||
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
"strings"
|
||||
|
||||
"github.com/lbryio/hub/internal"
|
||||
"github.com/lbryio/lbcd/chaincfg/chainhash"
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
)
|
||||
|
||||
const (
|
||||
|
|
@ -113,10 +114,10 @@ type DBStateKey struct {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
type DBStateValue struct {
|
||||
Genesis []byte
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Genesis *chainhash.Hash
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Height uint32
|
||||
TxCount uint32
|
||||
Tip []byte
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Tip *chainhash.Hash
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
UtxoFlushCount uint32
|
||||
WallTime uint32
|
||||
FirstSync bool
|
||||
|
|
@ -129,10 +130,10 @@ type DBStateValue struct {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
func NewDBStateValue() *DBStateValue {
|
||||
return &DBStateValue{
|
||||
Genesis: make([]byte, 32),
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Genesis: new(chainhash.Hash),
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Height: 0,
|
||||
TxCount: 0,
|
||||
Tip: make([]byte, 32),
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Tip: new(chainhash.Hash),
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
UtxoFlushCount: 0,
|
||||
WallTime: 0,
|
||||
FirstSync: true,
|
||||
|
|
@ -220,11 +221,13 @@ func DBStateKeyUnpack(key []byte) *DBStateKey {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
func DBStateValueUnpack(value []byte) *DBStateValue {
|
||||
genesis := (*chainhash.Hash)(value[:32])
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
tip := (*chainhash.Hash)(value[32+4+4 : 32+4+4+32])
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
x := &DBStateValue{
|
||||
Genesis: value[:32],
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Genesis: genesis,
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Height: binary.BigEndian.Uint32(value[32:]),
|
||||
TxCount: binary.BigEndian.Uint32(value[32+4:]),
|
||||
Tip: value[32+4+4 : 32+4+4+32],
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
Tip: tip,
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
UtxoFlushCount: binary.BigEndian.Uint32(value[32+4+4+32:]),
|
||||
WallTime: binary.BigEndian.Uint32(value[32+4+4+32+4:]),
|
||||
FirstSync: value[32+4+4+32+4+4] == 1,
|
||||
|
|
@ -583,7 +586,7 @@ type BlockHashKey struct {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
type BlockHashValue struct {
|
||||
BlockHash []byte `json:"block_hash"`
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
BlockHash *chainhash.Hash `json:"block_hash"`
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
func NewBlockHashKey(height uint32) *BlockHashKey {
|
||||
|
|
@ -670,8 +673,10 @@ func BlockHashKeyUnpack(key []byte) *BlockHashKey {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
func BlockHashValueUnpack(value []byte) *BlockHashValue {
|
||||
// hash := chainhash.Hash{}
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
hash := (*chainhash.Hash)(value)
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
return &BlockHashValue{
|
||||
BlockHash: value[:32],
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
BlockHash: hash,
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -681,7 +686,7 @@ type BlockTxsKey struct {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
type BlockTxsValue struct {
|
||||
TxHashes [][]byte `json:"tx_hashes"`
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
TxHashes []*chainhash.Hash `json:"tx_hashes"`
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
func (k *BlockTxsKey) NewBlockTxsKey(height uint32) *BlockTxsKey {
|
||||
|
|
@ -712,7 +717,7 @@ func (v *BlockTxsValue) PackValue() []byte {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
log.Println("Warning, txhash not 32 bytes", tx)
|
||||
return nil
|
||||
}
|
||||
copy(value[i*32:], tx)
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
copy(value[i*32:], tx[:])
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
return value
|
||||
|
|
@ -773,9 +778,9 @@ func BlockTxsKeyUnpack(key []byte) *BlockTxsKey {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
func BlockTxsValueUnpack(value []byte) *BlockTxsValue {
|
||||
numHashes := len(value) / 32
|
||||
txs := make([][]byte, numHashes)
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
txs := make([]*chainhash.Hash, numHashes)
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
for i := 0; i < numHashes; i++ {
|
||||
txs[i] = value[i*32 : (i+1)*32]
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
txs[i] = (*chainhash.Hash)(value[i*32 : (i+1)*32])
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
return &BlockTxsValue{
|
||||
TxHashes: txs,
|
||||
|
|
@ -881,7 +886,7 @@ type TxHashKey struct {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
type TxHashValue struct {
|
||||
TxHash []byte `json:"tx_hash"`
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
TxHash *chainhash.Hash `json:"tx_hash"`
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
func NewTxHashKey(txNum uint32) *TxHashKey {
|
||||
|
|
@ -965,13 +970,13 @@ func TxHashKeyUnpack(key []byte) *TxHashKey {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
func TxHashValueUnpack(value []byte) *TxHashValue {
|
||||
return &TxHashValue{
|
||||
TxHash: value,
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
TxHash: (*chainhash.Hash)(value),
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
}
|
||||
|
||||
type TxNumKey struct {
|
||||
Prefix []byte `json:"prefix"`
|
||||
TxHash []byte `json:"tx_hash"`
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
TxHash *chainhash.Hash `json:"tx_hash"`
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
type TxNumValue struct {
|
||||
|
|
@ -1045,7 +1050,7 @@ func TxNumKeyUnpack(key []byte) *TxNumKey {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
prefixLen := 1
|
||||
return &TxNumKey{
|
||||
Prefix: key[:prefixLen],
|
||||
TxHash: key[prefixLen : prefixLen+32],
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
TxHash: (*chainhash.Hash)(key[prefixLen : prefixLen+32]),
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -1057,7 +1062,7 @@ func TxNumValueUnpack(value []byte) *TxNumValue {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
|
||||
type TxKey struct {
|
||||
Prefix []byte `json:"prefix"`
|
||||
TxHash []byte `json:"tx_hash"`
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
TxHash *chainhash.Hash `json:"tx_hash"`
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
|
||||
type TxValue struct {
|
||||
|
|
@ -1131,7 +1136,7 @@ func TxKeyUnpack(key []byte) *TxKey {
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
prefixLen := 1
|
||||
return &TxKey{
|
||||
Prefix: key[:prefixLen],
|
||||
TxHash: key[prefixLen : prefixLen+32],
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
TxHash: (*chainhash.Hash)(key[prefixLen : prefixLen+32]),
|
||||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
why snake case here? why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25 if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address. i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.
|
||||
3
go.mod
|
|
@ -20,6 +20,8 @@ require (
|
|||
|
you're using v2 and v3? what are you using from v2? you're using v2 and v3? what are you using from v2?
also have you run also have you run `go mod tidy` recently?
One straggler, just removed it. One straggler, just removed it.
you're using v2 and v3? what are you using from v2? you're using v2 and v3? what are you using from v2?
also have you run also have you run `go mod tidy` recently?
One straggler, just removed it. One straggler, just removed it.
|
||||
gopkg.in/karalabe/cookiejar.v1 v1.0.0-20141109175019-e1490cae028c
|
||||
)
|
||||
|
||||
require golang.org/x/crypto v0.0.0-20211209193657-4570a0811e8b // indirect
|
||||
|
you're using v2 and v3? what are you using from v2? you're using v2 and v3? what are you using from v2?
also have you run also have you run `go mod tidy` recently?
One straggler, just removed it. One straggler, just removed it.
|
||||
|
||||
|
you're using v2 and v3? what are you using from v2? you're using v2 and v3? what are you using from v2?
also have you run also have you run `go mod tidy` recently?
One straggler, just removed it. One straggler, just removed it.
|
||||
require (
|
||||
github.com/beorn7/perks v1.0.1 // indirect
|
||||
github.com/cespare/xxhash/v2 v2.1.2 // indirect
|
||||
|
|
@ -28,6 +30,7 @@ require (
|
|||
|
you're using v2 and v3? what are you using from v2? you're using v2 and v3? what are you using from v2?
also have you run also have you run `go mod tidy` recently?
One straggler, just removed it. One straggler, just removed it.
you're using v2 and v3? what are you using from v2? you're using v2 and v3? what are you using from v2?
also have you run also have you run `go mod tidy` recently?
One straggler, just removed it. One straggler, just removed it.
|
||||
github.com/golang/protobuf v1.5.2 // indirect
|
||||
github.com/gorilla/websocket v1.4.2 // indirect
|
||||
github.com/josharian/intern v1.0.0 // indirect
|
||||
github.com/lbryio/lbcd v0.22.201-beta-rc1
|
||||
|
you're using v2 and v3? what are you using from v2? you're using v2 and v3? what are you using from v2?
also have you run also have you run `go mod tidy` recently?
One straggler, just removed it. One straggler, just removed it.
|
||||
github.com/mailru/easyjson v0.7.7 // indirect
|
||||
github.com/matttproud/golang_protobuf_extensions v1.0.1 // indirect
|
||||
github.com/nlopes/slack v0.6.0 // indirect
|
||||
|
|
|
|||
|
you're using v2 and v3? what are you using from v2? you're using v2 and v3? what are you using from v2?
also have you run also have you run `go mod tidy` recently?
One straggler, just removed it. One straggler, just removed it.
you're using v2 and v3? what are you using from v2? you're using v2 and v3? what are you using from v2?
also have you run also have you run `go mod tidy` recently?
One straggler, just removed it. One straggler, just removed it.
|
||||
3
go.sum
|
|
@ -347,6 +347,8 @@ github.com/labstack/gommon v0.3.0/go.mod h1:MULnywXg0yavhxWKc+lOruYdAhDwPK9wf0OL
|
|||
github.com/lbryio/lbcd v0.22.100-beta/go.mod h1:u8SaFX4xdGMMR5xasBGfgApC8pvD4rnK2OujZnrq5gs=
|
||||
github.com/lbryio/lbcd v0.22.100-beta-rc5/go.mod h1:9PbFSlHYX7WlnDQwcTxHVf1W35VAnRsattCSyKOO55g=
|
||||
github.com/lbryio/lbcd v0.22.200-beta/go.mod h1:kNuzGWf808ipTGB0y0WogzsGv5BVM4Qv85Z+JYwC9FA=
|
||||
github.com/lbryio/lbcd v0.22.201-beta-rc1 h1:FmzzApVj2RBXloLM2w9tLvN2xyTZjeyh+QC7GIw/wwo=
|
||||
github.com/lbryio/lbcd v0.22.201-beta-rc1/go.mod h1:kNuzGWf808ipTGB0y0WogzsGv5BVM4Qv85Z+JYwC9FA=
|
||||
github.com/lbryio/lbcutil v1.0.201/go.mod h1:gDHc/b+Rdz3J7+VB8e5/Bl9roVf8Q5/8FQCyuK9dXD0=
|
||||
github.com/lbryio/lbcutil v1.0.202-rc3/go.mod h1:LGPtVBBzh4cFXfLFb8ginlFcbA2QwumLNFd0yk/as2o=
|
||||
github.com/lbryio/lbry.go/v2 v2.7.1/go.mod h1:sUhhSKqPNkiwgBqvBzJIqfLLzGH8hkDGrrO/HcaXzFc=
|
||||
|
|
@ -619,6 +621,7 @@ golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPh
|
|||
golang.org/x/crypto v0.0.0-20210322153248-0c34fe9e7dc2/go.mod h1:T9bdIzuCu7OtxOm1hfPfRQxPLYneinmdGuTeoZ9dtd4=
|
||||
golang.org/x/crypto v0.0.0-20210817164053-32db794688a5/go.mod h1:GvvjBRRGRdwPK5ydBHafDWAxML/pGHZbMvKqRZ5+Abc=
|
||||
golang.org/x/crypto v0.0.0-20210921155107-089bfa567519/go.mod h1:GvvjBRRGRdwPK5ydBHafDWAxML/pGHZbMvKqRZ5+Abc=
|
||||
golang.org/x/crypto v0.0.0-20211209193657-4570a0811e8b h1:QAqMVf3pSa6eeTsuklijukjXBlj7Es2QQplab+/RbQ4=
|
||||
golang.org/x/crypto v0.0.0-20211209193657-4570a0811e8b/go.mod h1:IxCIyHEi3zRg3s0A5j5BB6A9Jmi73HwBIUl50j+osU4=
|
||||
golang.org/x/exp v0.0.0-20190121172915-509febef88a4/go.mod h1:CJ0aWSM057203Lf6IL+f9T1iT9GByDxfZKAQTCR3kQA=
|
||||
golang.org/x/exp v0.0.0-20190306152737-a1d7652674e8/go.mod h1:CJ0aWSM057203Lf6IL+f9T1iT9GByDxfZKAQTCR3kQA=
|
||||
|
|
|
|||
why snake case here?
if this is a fixed size, should it be an array? or even a chainhash.Hash? https://github.com/lbryio/lbcd/blob/master/chaincfg/chainhash/hash.go#L25
i suggest using lbcd types as much as possible where it makes sense. if something is a Hash, make it a Hash. if its an Address, make it an Address.