LBRYCommunity/lbcd
1
0
Fork 0
Code Issues 17 Pull requests 4 Packages Projects Releases 28 Wiki Activity
lbcd/txscript/script_test.go

4225 lines
87 KiB
Go
Raw Normal View History

txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
// Copyright (c) 2013-2017 The btcsuite developers
Initial implementation.
2013-06-12 23:35:27 +02:00
// Use of this source code is governed by an ISC
// license that can be found in the LICENSE file.
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
package txscript
Initial implementation.
2013-06-12 23:35:27 +02:00
import (
"bytes"
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
"reflect"
goimports -w .
2014-07-03 02:37:49 +02:00
"testing"
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
)
// TestParseOpcode tests for opcode parsing with bad data templates.
func TestParseOpcode(t *testing.T) {
// Deep copy the array and make one of the opcodes invalid by setting it
// to the wrong length.
fakeArray := opcodeArray
fakeArray[OP_PUSHDATA4] = opcode{value: OP_PUSHDATA4,
name: "OP_PUSHDATA4", length: -8, opfunc: opcodePushData}
// This script would be fine if -8 was a valid length.
_, err := parseScriptTemplate([]byte{OP_PUSHDATA4, 0x1, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00}, &fakeArray)
if err == nil {
t.Errorf("no error with dodgy opcode array!")
}
}
// TestUnparsingInvalidOpcodes tests for errors when unparsing invalid parsed
// opcodes.
func TestUnparsingInvalidOpcodes(t *testing.T) {
tests := []struct {
name string
pop *parsedOpcode
expectedErr error
}{
{
name: "OP_FALSE",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_FALSE],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_FALSE long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_FALSE],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_1 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_1],
data: nil,
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_1",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_1],
data: make([]byte, 1),
},
expectedErr: nil,
},
{
name: "OP_DATA_1 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_1],
data: make([]byte, 2),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_2 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_2],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_2",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_2],
data: make([]byte, 2),
},
expectedErr: nil,
},
{
name: "OP_DATA_2 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_2],
data: make([]byte, 3),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_3 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_3],
data: make([]byte, 2),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_3",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_3],
data: make([]byte, 3),
},
expectedErr: nil,
},
{
name: "OP_DATA_3 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_3],
data: make([]byte, 4),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_4 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_4],
data: make([]byte, 3),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_4",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_4],
data: make([]byte, 4),
},
expectedErr: nil,
},
{
name: "OP_DATA_4 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_4],
data: make([]byte, 5),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_5 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_5],
data: make([]byte, 4),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_5",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_5],
data: make([]byte, 5),
},
expectedErr: nil,
},
{
name: "OP_DATA_5 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_5],
data: make([]byte, 6),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_6 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_6],
data: make([]byte, 5),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_6",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_6],
data: make([]byte, 6),
},
expectedErr: nil,
},
{
name: "OP_DATA_6 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_6],
data: make([]byte, 7),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_7 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_7],
data: make([]byte, 6),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_7",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_7],
data: make([]byte, 7),
},
expectedErr: nil,
},
{
name: "OP_DATA_7 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_7],
data: make([]byte, 8),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_8 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_8],
data: make([]byte, 7),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_8",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_8],
data: make([]byte, 8),
},
expectedErr: nil,
},
{
name: "OP_DATA_8 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_8],
data: make([]byte, 9),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_9 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_9],
data: make([]byte, 8),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_9",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_9],
data: make([]byte, 9),
},
expectedErr: nil,
},
{
name: "OP_DATA_9 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_9],
data: make([]byte, 10),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_10 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_10],
data: make([]byte, 9),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_10",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_10],
data: make([]byte, 10),
},
expectedErr: nil,
},
{
name: "OP_DATA_10 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_10],
data: make([]byte, 11),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_11 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_11],
data: make([]byte, 10),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_11",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_11],
data: make([]byte, 11),
},
expectedErr: nil,
},
{
name: "OP_DATA_11 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_11],
data: make([]byte, 12),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_12 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_12],
data: make([]byte, 11),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_12",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_12],
data: make([]byte, 12),
},
expectedErr: nil,
},
{
name: "OP_DATA_12 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_12],
data: make([]byte, 13),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_13 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_13],
data: make([]byte, 12),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_13",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_13],
data: make([]byte, 13),
},
expectedErr: nil,
},
{
name: "OP_DATA_13 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_13],
data: make([]byte, 14),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_14 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_14],
data: make([]byte, 13),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_14",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_14],
data: make([]byte, 14),
},
expectedErr: nil,
},
{
name: "OP_DATA_14 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_14],
data: make([]byte, 15),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_15 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_15],
data: make([]byte, 14),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_15",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_15],
data: make([]byte, 15),
},
expectedErr: nil,
},
{
name: "OP_DATA_15 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_15],
data: make([]byte, 16),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_16 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_16],
data: make([]byte, 15),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_16",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_16],
data: make([]byte, 16),
},
expectedErr: nil,
},
{
name: "OP_DATA_16 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_16],
data: make([]byte, 17),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_17 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_17],
data: make([]byte, 16),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_17",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_17],
data: make([]byte, 17),
},
expectedErr: nil,
},
{
name: "OP_DATA_17 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_17],
data: make([]byte, 18),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_18 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_18],
data: make([]byte, 17),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_18",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_18],
data: make([]byte, 18),
},
expectedErr: nil,
},
{
name: "OP_DATA_18 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_18],
data: make([]byte, 19),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_19 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_19],
data: make([]byte, 18),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_19",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_19],
data: make([]byte, 19),
},
expectedErr: nil,
},
{
name: "OP_DATA_19 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_19],
data: make([]byte, 20),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_20 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_20],
data: make([]byte, 19),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_20",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_20],
data: make([]byte, 20),
},
expectedErr: nil,
},
{
name: "OP_DATA_20 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_20],
data: make([]byte, 21),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_21 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_21],
data: make([]byte, 20),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_21",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_21],
data: make([]byte, 21),
},
expectedErr: nil,
},
{
name: "OP_DATA_21 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_21],
data: make([]byte, 22),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_22 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_22],
data: make([]byte, 21),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_22",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_22],
data: make([]byte, 22),
},
expectedErr: nil,
},
{
name: "OP_DATA_22 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_22],
data: make([]byte, 23),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_23 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_23],
data: make([]byte, 22),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_23",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_23],
data: make([]byte, 23),
},
expectedErr: nil,
},
{
name: "OP_DATA_23 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_23],
data: make([]byte, 24),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_24 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_24],
data: make([]byte, 23),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_24",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_24],
data: make([]byte, 24),
},
expectedErr: nil,
},
{
name: "OP_DATA_24 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_24],
data: make([]byte, 25),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_25 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_25],
data: make([]byte, 24),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_25",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_25],
data: make([]byte, 25),
},
expectedErr: nil,
},
{
name: "OP_DATA_25 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_25],
data: make([]byte, 26),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_26 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_26],
data: make([]byte, 25),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_26",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_26],
data: make([]byte, 26),
},
expectedErr: nil,
},
{
name: "OP_DATA_26 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_26],
data: make([]byte, 27),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_27 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_27],
data: make([]byte, 26),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_27",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_27],
data: make([]byte, 27),
},
expectedErr: nil,
},
{
name: "OP_DATA_27 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_27],
data: make([]byte, 28),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_28 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_28],
data: make([]byte, 27),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_28",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_28],
data: make([]byte, 28),
},
expectedErr: nil,
},
{
name: "OP_DATA_28 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_28],
data: make([]byte, 29),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_29 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_29],
data: make([]byte, 28),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_29",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_29],
data: make([]byte, 29),
},
expectedErr: nil,
},
{
name: "OP_DATA_29 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_29],
data: make([]byte, 30),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_30 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_30],
data: make([]byte, 29),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_30",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_30],
data: make([]byte, 30),
},
expectedErr: nil,
},
{
name: "OP_DATA_30 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_30],
data: make([]byte, 31),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_31 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_31],
data: make([]byte, 30),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_31",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_31],
data: make([]byte, 31),
},
expectedErr: nil,
},
{
name: "OP_DATA_31 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_31],
data: make([]byte, 32),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_32 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_32],
data: make([]byte, 31),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_32",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_32],
data: make([]byte, 32),
},
expectedErr: nil,
},
{
name: "OP_DATA_32 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_32],
data: make([]byte, 33),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_33 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_33],
data: make([]byte, 32),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_33",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_33],
data: make([]byte, 33),
},
expectedErr: nil,
},
{
name: "OP_DATA_33 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_33],
data: make([]byte, 34),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_34 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_34],
data: make([]byte, 33),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_34",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_34],
data: make([]byte, 34),
},
expectedErr: nil,
},
{
name: "OP_DATA_34 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_34],
data: make([]byte, 35),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_35 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_35],
data: make([]byte, 34),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_35",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_35],
data: make([]byte, 35),
},
expectedErr: nil,
},
{
name: "OP_DATA_35 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_35],
data: make([]byte, 36),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_36 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_36],
data: make([]byte, 35),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_36",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_36],
data: make([]byte, 36),
},
expectedErr: nil,
},
{
name: "OP_DATA_36 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_36],
data: make([]byte, 37),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_37 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_37],
data: make([]byte, 36),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_37",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_37],
data: make([]byte, 37),
},
expectedErr: nil,
},
{
name: "OP_DATA_37 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_37],
data: make([]byte, 38),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_38 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_38],
data: make([]byte, 37),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_38",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_38],
data: make([]byte, 38),
},
expectedErr: nil,
},
{
name: "OP_DATA_38 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_38],
data: make([]byte, 39),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_39 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_39],
data: make([]byte, 38),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_39",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_39],
data: make([]byte, 39),
},
expectedErr: nil,
},
{
name: "OP_DATA_39 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_39],
data: make([]byte, 40),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_40 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_40],
data: make([]byte, 39),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_40",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_40],
data: make([]byte, 40),
},
expectedErr: nil,
},
{
name: "OP_DATA_40 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_40],
data: make([]byte, 41),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_41 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_41],
data: make([]byte, 40),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_41",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_41],
data: make([]byte, 41),
},
expectedErr: nil,
},
{
name: "OP_DATA_41 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_41],
data: make([]byte, 42),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_42 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_42],
data: make([]byte, 41),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_42",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_42],
data: make([]byte, 42),
},
expectedErr: nil,
},
{
name: "OP_DATA_42 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_42],
data: make([]byte, 43),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_43 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_43],
data: make([]byte, 42),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_43",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_43],
data: make([]byte, 43),
},
expectedErr: nil,
},
{
name: "OP_DATA_43 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_43],
data: make([]byte, 44),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_44 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_44],
data: make([]byte, 43),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_44",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_44],
data: make([]byte, 44),
},
expectedErr: nil,
},
{
name: "OP_DATA_44 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_44],
data: make([]byte, 45),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_45 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_45],
data: make([]byte, 44),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_45",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_45],
data: make([]byte, 45),
},
expectedErr: nil,
},
{
name: "OP_DATA_45 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_45],
data: make([]byte, 46),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_46 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_46],
data: make([]byte, 45),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_46",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_46],
data: make([]byte, 46),
},
expectedErr: nil,
},
{
name: "OP_DATA_46 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_46],
data: make([]byte, 47),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_47 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_47],
data: make([]byte, 46),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_47",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_47],
data: make([]byte, 47),
},
expectedErr: nil,
},
{
name: "OP_DATA_47 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_47],
data: make([]byte, 48),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_48 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_48],
data: make([]byte, 47),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_48",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_48],
data: make([]byte, 48),
},
expectedErr: nil,
},
{
name: "OP_DATA_48 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_48],
data: make([]byte, 49),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_49 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_49],
data: make([]byte, 48),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_49",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_49],
data: make([]byte, 49),
},
expectedErr: nil,
},
{
name: "OP_DATA_49 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_49],
data: make([]byte, 50),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_50 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_50],
data: make([]byte, 49),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_50",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_50],
data: make([]byte, 50),
},
expectedErr: nil,
},
{
name: "OP_DATA_50 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_50],
data: make([]byte, 51),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_51 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_51],
data: make([]byte, 50),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_51",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_51],
data: make([]byte, 51),
},
expectedErr: nil,
},
{
name: "OP_DATA_51 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_51],
data: make([]byte, 52),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_52 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_52],
data: make([]byte, 51),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_52",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_52],
data: make([]byte, 52),
},
expectedErr: nil,
},
{
name: "OP_DATA_52 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_52],
data: make([]byte, 53),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_53 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_53],
data: make([]byte, 52),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_53",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_53],
data: make([]byte, 53),
},
expectedErr: nil,
},
{
name: "OP_DATA_53 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_53],
data: make([]byte, 54),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_54 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_54],
data: make([]byte, 53),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_54",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_54],
data: make([]byte, 54),
},
expectedErr: nil,
},
{
name: "OP_DATA_54 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_54],
data: make([]byte, 55),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_55 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_55],
data: make([]byte, 54),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_55",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_55],
data: make([]byte, 55),
},
expectedErr: nil,
},
{
name: "OP_DATA_55 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_55],
data: make([]byte, 56),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_56 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_56],
data: make([]byte, 55),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_56",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_56],
data: make([]byte, 56),
},
expectedErr: nil,
},
{
name: "OP_DATA_56 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_56],
data: make([]byte, 57),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_57 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_57],
data: make([]byte, 56),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_57",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_57],
data: make([]byte, 57),
},
expectedErr: nil,
},
{
name: "OP_DATA_57 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_57],
data: make([]byte, 58),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_58 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_58],
data: make([]byte, 57),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_58",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_58],
data: make([]byte, 58),
},
expectedErr: nil,
},
{
name: "OP_DATA_58 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_58],
data: make([]byte, 59),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_59 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_59],
data: make([]byte, 58),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_59",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_59],
data: make([]byte, 59),
},
expectedErr: nil,
},
{
name: "OP_DATA_59 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_59],
data: make([]byte, 60),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_60 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_60],
data: make([]byte, 59),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_60",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_60],
data: make([]byte, 60),
},
expectedErr: nil,
},
{
name: "OP_DATA_60 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_60],
data: make([]byte, 61),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_61 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_61],
data: make([]byte, 60),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_61",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_61],
data: make([]byte, 61),
},
expectedErr: nil,
},
{
name: "OP_DATA_61 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_61],
data: make([]byte, 62),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_62 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_62],
data: make([]byte, 61),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_62",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_62],
data: make([]byte, 62),
},
expectedErr: nil,
},
{
name: "OP_DATA_62 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_62],
data: make([]byte, 63),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_63 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_63],
data: make([]byte, 62),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_63",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_63],
data: make([]byte, 63),
},
expectedErr: nil,
},
{
name: "OP_DATA_63 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_63],
data: make([]byte, 64),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_64 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_64],
data: make([]byte, 63),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_64",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_64],
data: make([]byte, 64),
},
expectedErr: nil,
},
{
name: "OP_DATA_64 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_64],
data: make([]byte, 65),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_65 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_65],
data: make([]byte, 64),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_65",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_65],
data: make([]byte, 65),
},
expectedErr: nil,
},
{
name: "OP_DATA_65 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_65],
data: make([]byte, 66),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_66 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_66],
data: make([]byte, 65),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_66",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_66],
data: make([]byte, 66),
},
expectedErr: nil,
},
{
name: "OP_DATA_66 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_66],
data: make([]byte, 67),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_67 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_67],
data: make([]byte, 66),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_67",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_67],
data: make([]byte, 67),
},
expectedErr: nil,
},
{
name: "OP_DATA_67 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_67],
data: make([]byte, 68),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_68 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_68],
data: make([]byte, 67),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_68",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_68],
data: make([]byte, 68),
},
expectedErr: nil,
},
{
name: "OP_DATA_68 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_68],
data: make([]byte, 69),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_69 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_69],
data: make([]byte, 68),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_69",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_69],
data: make([]byte, 69),
},
expectedErr: nil,
},
{
name: "OP_DATA_69 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_69],
data: make([]byte, 70),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_70 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_70],
data: make([]byte, 69),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_70",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_70],
data: make([]byte, 70),
},
expectedErr: nil,
},
{
name: "OP_DATA_70 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_70],
data: make([]byte, 71),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_71 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_71],
data: make([]byte, 70),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_71",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_71],
data: make([]byte, 71),
},
expectedErr: nil,
},
{
name: "OP_DATA_71 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_71],
data: make([]byte, 72),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_72 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_72],
data: make([]byte, 71),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_72",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_72],
data: make([]byte, 72),
},
expectedErr: nil,
},
{
name: "OP_DATA_72 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_72],
data: make([]byte, 73),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_73 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_73],
data: make([]byte, 72),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_73",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_73],
data: make([]byte, 73),
},
expectedErr: nil,
},
{
name: "OP_DATA_73 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_73],
data: make([]byte, 74),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_74 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_74],
data: make([]byte, 73),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_74",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_74],
data: make([]byte, 74),
},
expectedErr: nil,
},
{
name: "OP_DATA_74 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_74],
data: make([]byte, 75),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_75 short",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_75],
data: make([]byte, 74),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DATA_75",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_75],
data: make([]byte, 75),
},
expectedErr: nil,
},
{
name: "OP_DATA_75 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DATA_75],
data: make([]byte, 76),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_PUSHDATA1",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_PUSHDATA1],
data: []byte{0, 1, 2, 3, 4},
},
expectedErr: nil,
},
{
name: "OP_PUSHDATA2",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_PUSHDATA2],
data: []byte{0, 1, 2, 3, 4},
},
expectedErr: nil,
},
{
name: "OP_PUSHDATA4",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_PUSHDATA1],
data: []byte{0, 1, 2, 3, 4},
},
expectedErr: nil,
},
{
name: "OP_1NEGATE",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_1NEGATE],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_1NEGATE long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_1NEGATE],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_RESERVED",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RESERVED],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_RESERVED long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RESERVED],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_TRUE",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_TRUE],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_TRUE long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_TRUE],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_2",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_2 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_2",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_2 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_3",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_3],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_3 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_3],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_4",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_4],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_4 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_4],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_5",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_5],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_5 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_5],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_6",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_6],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_6 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_6],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_7",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_7],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_7 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_7],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_8",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_8],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_8 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_8],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_9",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_9],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_9 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_9],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_10",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_10],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_10 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_10],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_11",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_11],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_11 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_11],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_12",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_12],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_12 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_12],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_13",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_13],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_13 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_13],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_14",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_14],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_14 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_14],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_15",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_15],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_15 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_15],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_16",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_16],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_16 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_16],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_VER",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_VER],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_VER long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_VER],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_IF",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_IF],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_IF long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_IF],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOTIF",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOTIF],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOTIF long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOTIF],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_VERIF",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_VERIF],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_VERIF long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_VERIF],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_VERNOTIF",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_VERNOTIF],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_VERNOTIF long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_VERNOTIF],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_ELSE",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ELSE],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_ELSE long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ELSE],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_ENDIF",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ENDIF],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_ENDIF long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ENDIF],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_VERIFY",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_VERIFY],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_VERIFY long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_VERIFY],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_RETURN",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RETURN],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_RETURN long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RETURN],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_TOALTSTACK",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_TOALTSTACK],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_TOALTSTACK long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_TOALTSTACK],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_FROMALTSTACK",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_FROMALTSTACK],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_FROMALTSTACK long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_FROMALTSTACK],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_2DROP",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2DROP],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_2DROP long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2DROP],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_2DUP",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2DUP],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_2DUP long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2DUP],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_3DUP",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_3DUP],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_3DUP long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_3DUP],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_2OVER",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2OVER],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_2OVER long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2OVER],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_2ROT",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2ROT],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_2ROT long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2ROT],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_2SWAP",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2SWAP],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_2SWAP long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2SWAP],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_IFDUP",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_IFDUP],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_IFDUP long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_IFDUP],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DEPTH",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DEPTH],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_DEPTH long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DEPTH],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DROP",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DROP],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_DROP long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DROP],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DUP",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DUP],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_DUP long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DUP],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NIP",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NIP],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NIP long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NIP],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_OVER",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_OVER],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_OVER long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_OVER],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_PICK",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_PICK],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_PICK long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_PICK],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_ROLL",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ROLL],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_ROLL long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ROLL],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_ROT",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ROT],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_ROT long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ROT],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_SWAP",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SWAP],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_SWAP long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SWAP],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_TUCK",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_TUCK],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_TUCK long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_TUCK],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_CAT",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CAT],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_CAT long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CAT],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_SUBSTR",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SUBSTR],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_SUBSTR long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SUBSTR],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_LEFT",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_LEFT],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_LEFT long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_LEFT],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_LEFT",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_LEFT],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_LEFT long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_LEFT],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_RIGHT",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RIGHT],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_RIGHT long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RIGHT],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_SIZE",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SIZE],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_SIZE long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SIZE],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_INVERT",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_INVERT],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_INVERT long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_INVERT],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_AND",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_AND],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_AND long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_AND],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_OR",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_OR],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_OR long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_OR],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_XOR",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_XOR],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_XOR long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_XOR],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_EQUAL",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_EQUAL],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_EQUAL long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_EQUAL],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_EQUALVERIFY",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_EQUALVERIFY],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_EQUALVERIFY long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_EQUALVERIFY],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_RESERVED1",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RESERVED1],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_RESERVED1 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RESERVED1],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_RESERVED2",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RESERVED2],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_RESERVED2 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RESERVED2],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_1ADD",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_1ADD],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_1ADD long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_1ADD],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_1SUB",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_1SUB],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_1SUB long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_1SUB],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_2MUL",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2MUL],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_2MUL long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2MUL],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_2DIV",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2DIV],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_2DIV long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_2DIV],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NEGATE",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NEGATE],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NEGATE long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NEGATE],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_ABS",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ABS],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_ABS long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ABS],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOT",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOT],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOT long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOT],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_0NOTEQUAL",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_0NOTEQUAL],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_0NOTEQUAL long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_0NOTEQUAL],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_ADD",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ADD],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_ADD long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_ADD],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_SUB",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SUB],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_SUB long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SUB],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_MUL",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_MUL],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_MUL long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_MUL],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_DIV",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DIV],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_DIV long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_DIV],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_MOD",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_MOD],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_MOD long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_MOD],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_LSHIFT",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_LSHIFT],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_LSHIFT long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_LSHIFT],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_RSHIFT",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RSHIFT],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_RSHIFT long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RSHIFT],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_BOOLAND",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_BOOLAND],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_BOOLAND long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_BOOLAND],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_BOOLOR",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_BOOLOR],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_BOOLOR long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_BOOLOR],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NUMEQUAL",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NUMEQUAL],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NUMEQUAL long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NUMEQUAL],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NUMEQUALVERIFY",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NUMEQUALVERIFY],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NUMEQUALVERIFY long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NUMEQUALVERIFY],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NUMNOTEQUAL",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NUMNOTEQUAL],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NUMNOTEQUAL long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NUMNOTEQUAL],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_LESSTHAN",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_LESSTHAN],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_LESSTHAN long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_LESSTHAN],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_GREATERTHAN",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_GREATERTHAN],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_GREATERTHAN long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_GREATERTHAN],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_LESSTHANOREQUAL",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_LESSTHANOREQUAL],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_LESSTHANOREQUAL long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_LESSTHANOREQUAL],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_GREATERTHANOREQUAL",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_GREATERTHANOREQUAL],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_GREATERTHANOREQUAL long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_GREATERTHANOREQUAL],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_MIN",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_MIN],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_MIN long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_MIN],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_MAX",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_MAX],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_MAX long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_MAX],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_WITHIN",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_WITHIN],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_WITHIN long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_WITHIN],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_RIPEMD160",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RIPEMD160],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_RIPEMD160 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_RIPEMD160],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_SHA1",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SHA1],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_SHA1 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SHA1],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_SHA256",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SHA256],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_SHA256 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_SHA256],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_HASH160",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_HASH160],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_HASH160 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_HASH160],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_HASH256",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_HASH256],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_HASH256 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_HASH256],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_CODESAPERATOR",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CODESEPARATOR],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_CODESEPARATOR long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CODESEPARATOR],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_CHECKSIG",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CHECKSIG],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_CHECKSIG long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CHECKSIG],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_CHECKSIGVERIFY",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CHECKSIGVERIFY],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_CHECKSIGVERIFY long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CHECKSIGVERIFY],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_CHECKMULTISIG",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CHECKMULTISIG],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_CHECKMULTISIG long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CHECKMULTISIG],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_CHECKMULTISIGVERIFY",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CHECKMULTISIGVERIFY],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_CHECKMULTISIGVERIFY long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_CHECKMULTISIGVERIFY],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP1",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP1],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP1 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP1],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP2",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP2],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP2 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP2],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP3",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP3],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP3 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP3],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP4",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP4],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP4 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP4],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP5",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP5],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP5 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP5],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP6",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP6],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP6 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP6],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP7",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP7],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP7 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP7],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP8",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP8],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP8 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP8],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP9",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP9],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP9 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP9],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_NOP10",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP10],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_NOP10 long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_NOP10],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_PUBKEYHASH",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_PUBKEYHASH],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_PUBKEYHASH long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_PUBKEYHASH],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_PUBKEY",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_PUBKEY],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_PUBKEY long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_PUBKEY],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
{
name: "OP_INVALIDOPCODE",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_INVALIDOPCODE],
data: nil,
},
expectedErr: nil,
},
{
name: "OP_INVALIDOPCODE long",
pop: &parsedOpcode{
opcode: &opcodeArray[OP_INVALIDOPCODE],
data: make([]byte, 1),
},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
expectedErr: scriptError(ErrInternal, ""),
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
},
}
goimports -w .
2014-07-03 02:37:49 +02:00
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
for _, test := range tests {
_, err := test.pop.bytes()
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
if e := tstCheckScriptError(err, test.expectedErr); e != nil {
t.Errorf("Parsed opcode test '%s': %v", test.name, e)
continue
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
}
}
}
Initial implementation.
2013-06-12 23:35:27 +02:00
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
// TestPushedData ensured the PushedData function extracts the expected data out
// of various scripts.
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
func TestPushedData(t *testing.T) {
Make several of the reg tests more consistent. This commit modifies various regression tests to make them more consistent with other tests throughout the code base. Also, it allows of all the tests to run in parallel.
2015-01-29 21:39:44 +01:00
t.Parallel()
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
var tests = []struct {
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
script string
out [][]byte
valid bool
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
}{
{
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
"0 IF 0 ELSE 2 ENDIF",
[][]byte{nil, nil},
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
true,
},
{
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
"16777216 10000000",
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
[][]byte{
{0x00, 0x00, 0x00, 0x01}, // 16777216
{0x80, 0x96, 0x98, 0x00}, // 10000000
},
true,
},
{
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
"DUP HASH160 '17VZNX1SN5NtKa8UQFxwQbFeFc3iqRYhem' EQUALVERIFY CHECKSIG",
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
[][]byte{
// 17VZNX1SN5NtKa8UQFxwQbFeFc3iqRYhem
{
0x31, 0x37, 0x56, 0x5a, 0x4e, 0x58, 0x31, 0x53, 0x4e, 0x35,
0x4e, 0x74, 0x4b, 0x61, 0x38, 0x55, 0x51, 0x46, 0x78, 0x77,
0x51, 0x62, 0x46, 0x65, 0x46, 0x63, 0x33, 0x69, 0x71, 0x52,
0x59, 0x68, 0x65, 0x6d,
},
},
true,
},
{
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
"PUSHDATA4 1000 EQUAL",
nil,
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
false,
},
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
for i, test := range tests {
script := mustParseShortForm(test.script)
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
data, err := PushedData(script)
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
if test.valid && err != nil {
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
t.Errorf("TestPushedData failed test #%d: %v\n", i, err)
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
continue
} else if !test.valid && err == nil {
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
t.Errorf("TestPushedData failed test #%d: test should "+
"be invalid\n", i)
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
continue
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
if !reflect.DeepEqual(data, test.out) {
t.Errorf("TestPushedData failed test #%d: want: %x "+
"got: %x\n", i, test.out, data)
Add new function PushedData. PushedData returns an array of byte slices containing any pushed data found in the passed script. This includes OP_0, but not OP_1 - OP_16. help from and ok @owainga
2014-05-08 19:14:01 +02:00
}
}
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
// TestHasCanonicalPush ensures the canonicalPush function works as expected.
func TestHasCanonicalPush(t *testing.T) {
Make several of the reg tests more consistent. This commit modifies various regression tests to make them more consistent with other tests throughout the code base. Also, it allows of all the tests to run in parallel.
2015-01-29 21:39:44 +01:00
t.Parallel()
Update script builder for BIP0062 and enforce limits. BIP0062 defines specific rules and canonical encodings for data pushes. The existing script builder code already conformed to all but one of the canonical data push rules that was added after it was originally implemented (adding a single byte of 0x81 must be converted to OP_1NEGATE). This commit implements that case and expands the existing tests to explicitly cover all cases mentioned in BIP0062. In addition, as a part of this change, the AddData function has been modified so that any attempt to push more than the maximum script element size bytes (520) in one push or any pushes the would cause the script to exceed the maximum script bytes allowed by the script engine (10000) will result in the final call to the Script function to only return the script up to the point of the first error along with the error. This change should have little effect on existing callers since they are almost positively not creating scripts which violate these rules as they could never be executed, however it does mean they need to check the new error return. Since the regression tests intentionally need to be able to exceed that limit, a new function named AddFullData has been added which does not enforce the limits, but still provides canonical encoding of the pushed data. Note that this commit does not affect consensus rules nor modify the script engine. Also, the tests have been marked so they can run in parallel.
2014-12-20 08:34:39 +01:00
for i := 0; i < 65535; i++ {
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
script, err := NewScriptBuilder().AddInt64(int64(i)).Script()
Update script builder for BIP0062 and enforce limits. BIP0062 defines specific rules and canonical encodings for data pushes. The existing script builder code already conformed to all but one of the canonical data push rules that was added after it was originally implemented (adding a single byte of 0x81 must be converted to OP_1NEGATE). This commit implements that case and expands the existing tests to explicitly cover all cases mentioned in BIP0062. In addition, as a part of this change, the AddData function has been modified so that any attempt to push more than the maximum script element size bytes (520) in one push or any pushes the would cause the script to exceed the maximum script bytes allowed by the script engine (10000) will result in the final call to the Script function to only return the script up to the point of the first error along with the error. This change should have little effect on existing callers since they are almost positively not creating scripts which violate these rules as they could never be executed, however it does mean they need to check the new error return. Since the regression tests intentionally need to be able to exceed that limit, a new function named AddFullData has been added which does not enforce the limits, but still provides canonical encoding of the pushed data. Note that this commit does not affect consensus rules nor modify the script engine. Also, the tests have been marked so they can run in parallel.
2014-12-20 08:34:39 +01:00
if err != nil {
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
t.Errorf("Script: test #%d unexpected error: %v\n", i,
err)
Update script builder for BIP0062 and enforce limits. BIP0062 defines specific rules and canonical encodings for data pushes. The existing script builder code already conformed to all but one of the canonical data push rules that was added after it was originally implemented (adding a single byte of 0x81 must be converted to OP_1NEGATE). This commit implements that case and expands the existing tests to explicitly cover all cases mentioned in BIP0062. In addition, as a part of this change, the AddData function has been modified so that any attempt to push more than the maximum script element size bytes (520) in one push or any pushes the would cause the script to exceed the maximum script bytes allowed by the script engine (10000) will result in the final call to the Script function to only return the script up to the point of the first error along with the error. This change should have little effect on existing callers since they are almost positively not creating scripts which violate these rules as they could never be executed, however it does mean they need to check the new error return. Since the regression tests intentionally need to be able to exceed that limit, a new function named AddFullData has been added which does not enforce the limits, but still provides canonical encoding of the pushed data. Note that this commit does not affect consensus rules nor modify the script engine. Also, the tests have been marked so they can run in parallel.
2014-12-20 08:34:39 +01:00
continue
Add HasCanonicalPushes Closes #6. ok @davecgh
2014-02-20 06:05:35 +01:00
}
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
if result := IsPushOnlyScript(script); !result {
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
t.Errorf("IsPushOnlyScript: test #%d failed: %x\n", i,
script)
Update script builder for BIP0062 and enforce limits. BIP0062 defines specific rules and canonical encodings for data pushes. The existing script builder code already conformed to all but one of the canonical data push rules that was added after it was originally implemented (adding a single byte of 0x81 must be converted to OP_1NEGATE). This commit implements that case and expands the existing tests to explicitly cover all cases mentioned in BIP0062. In addition, as a part of this change, the AddData function has been modified so that any attempt to push more than the maximum script element size bytes (520) in one push or any pushes the would cause the script to exceed the maximum script bytes allowed by the script engine (10000) will result in the final call to the Script function to only return the script up to the point of the first error along with the error. This change should have little effect on existing callers since they are almost positively not creating scripts which violate these rules as they could never be executed, however it does mean they need to check the new error return. Since the regression tests intentionally need to be able to exceed that limit, a new function named AddFullData has been added which does not enforce the limits, but still provides canonical encoding of the pushed data. Note that this commit does not affect consensus rules nor modify the script engine. Also, the tests have been marked so they can run in parallel.
2014-12-20 08:34:39 +01:00
continue
}
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
pops, err := parseScript(script)
Use ScriptVerifyMinimalData Additionally, drop HasCanoncialPushes as ScriptVerifyMinimalData offers more complete checks.
2015-02-25 02:11:57 +01:00
if err != nil {
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
t.Errorf("parseScript: #%d failed: %v", i, err)
Add HasCanonicalPushes Closes #6. ok @davecgh
2014-02-20 06:05:35 +01:00
continue
}
Use ScriptVerifyMinimalData Additionally, drop HasCanoncialPushes as ScriptVerifyMinimalData offers more complete checks.
2015-02-25 02:11:57 +01:00
for _, pop := range pops {
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
if result := canonicalPush(pop); !result {
t.Errorf("canonicalPush: test #%d failed: %x\n",
i, script)
Use ScriptVerifyMinimalData Additionally, drop HasCanoncialPushes as ScriptVerifyMinimalData offers more complete checks.
2015-02-25 02:11:57 +01:00
break
}
}
Add HasCanonicalPushes Closes #6. ok @davecgh
2014-02-20 06:05:35 +01:00
}
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
for i := 0; i <= MaxScriptElementSize; i++ {
builder := NewScriptBuilder()
Convert builder.Push* to builder.Add* we think this is clearer. Also, shorter! Discussed with @davecgh.
2014-02-20 18:42:06 +01:00
builder.AddData(bytes.Repeat([]byte{0x49}, i))
Update script builder for BIP0062 and enforce limits. BIP0062 defines specific rules and canonical encodings for data pushes. The existing script builder code already conformed to all but one of the canonical data push rules that was added after it was originally implemented (adding a single byte of 0x81 must be converted to OP_1NEGATE). This commit implements that case and expands the existing tests to explicitly cover all cases mentioned in BIP0062. In addition, as a part of this change, the AddData function has been modified so that any attempt to push more than the maximum script element size bytes (520) in one push or any pushes the would cause the script to exceed the maximum script bytes allowed by the script engine (10000) will result in the final call to the Script function to only return the script up to the point of the first error along with the error. This change should have little effect on existing callers since they are almost positively not creating scripts which violate these rules as they could never be executed, however it does mean they need to check the new error return. Since the regression tests intentionally need to be able to exceed that limit, a new function named AddFullData has been added which does not enforce the limits, but still provides canonical encoding of the pushed data. Note that this commit does not affect consensus rules nor modify the script engine. Also, the tests have been marked so they can run in parallel.
2014-12-20 08:34:39 +01:00
script, err := builder.Script()
if err != nil {
t.Errorf("StandardPushesTests test #%d unexpected error: %v\n", i, err)
continue
}
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
if result := IsPushOnlyScript(script); !result {
Update script builder for BIP0062 and enforce limits. BIP0062 defines specific rules and canonical encodings for data pushes. The existing script builder code already conformed to all but one of the canonical data push rules that was added after it was originally implemented (adding a single byte of 0x81 must be converted to OP_1NEGATE). This commit implements that case and expands the existing tests to explicitly cover all cases mentioned in BIP0062. In addition, as a part of this change, the AddData function has been modified so that any attempt to push more than the maximum script element size bytes (520) in one push or any pushes the would cause the script to exceed the maximum script bytes allowed by the script engine (10000) will result in the final call to the Script function to only return the script up to the point of the first error along with the error. This change should have little effect on existing callers since they are almost positively not creating scripts which violate these rules as they could never be executed, however it does mean they need to check the new error return. Since the regression tests intentionally need to be able to exceed that limit, a new function named AddFullData has been added which does not enforce the limits, but still provides canonical encoding of the pushed data. Note that this commit does not affect consensus rules nor modify the script engine. Also, the tests have been marked so they can run in parallel.
2014-12-20 08:34:39 +01:00
t.Errorf("StandardPushesTests IsPushOnlyScript test #%d failed: %x\n", i, script)
continue
Add HasCanonicalPushes Closes #6. ok @davecgh
2014-02-20 06:05:35 +01:00
}
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
pops, err := parseScript(script)
Use ScriptVerifyMinimalData Additionally, drop HasCanoncialPushes as ScriptVerifyMinimalData offers more complete checks.
2015-02-25 02:11:57 +01:00
if err != nil {
t.Errorf("StandardPushesTests #%d failed to TstParseScript: %v", i, err)
Add HasCanonicalPushes Closes #6. ok @davecgh
2014-02-20 06:05:35 +01:00
continue
}
Use ScriptVerifyMinimalData Additionally, drop HasCanoncialPushes as ScriptVerifyMinimalData offers more complete checks.
2015-02-25 02:11:57 +01:00
for _, pop := range pops {
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
if result := canonicalPush(pop); !result {
Use ScriptVerifyMinimalData Additionally, drop HasCanoncialPushes as ScriptVerifyMinimalData offers more complete checks.
2015-02-25 02:11:57 +01:00
t.Errorf("StandardPushesTests TstHasCanonicalPushes test #%d failed: %x\n", i, script)
break
}
}
Add HasCanonicalPushes Closes #6. ok @davecgh
2014-02-20 06:05:35 +01:00
}
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
// TestGetPreciseSigOps ensures the more precise signature operation counting
// mechanism which includes signatures in P2SH scripts works as expected.
func TestGetPreciseSigOps(t *testing.T) {
Make several of the reg tests more consistent. This commit modifies various regression tests to make them more consistent with other tests throughout the code base. Also, it allows of all the tests to run in parallel.
2015-01-29 21:39:44 +01:00
t.Parallel()
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
tests := []struct {
testing for the case where a p2sh sigscript isn't pushonly. Also providing a defined error (from NewScript) for that case.
2013-06-25 14:12:15 +02:00
name string
some more tests for GetPreciseSigOpsCount. total coverage now.
2013-06-24 17:32:41 +02:00
scriptSig []byte
testing for the case where a p2sh sigscript isn't pushonly. Also providing a defined error (from NewScript) for that case.
2013-06-25 14:12:15 +02:00
nSigOps int
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
}{
gofmt
2014-02-04 22:18:37 +01:00
{
testing for the case where a p2sh sigscript isn't pushonly. Also providing a defined error (from NewScript) for that case.
2013-06-25 14:12:15 +02:00
name: "scriptSig doesn't parse",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
scriptSig: mustParseShortForm("PUSHDATA1 0x02"),
some more tests for GetPreciseSigOpsCount. total coverage now.
2013-06-24 17:32:41 +02:00
},
gofmt
2014-02-04 22:18:37 +01:00
{
testing for the case where a p2sh sigscript isn't pushonly. Also providing a defined error (from NewScript) for that case.
2013-06-25 14:12:15 +02:00
name: "scriptSig isn't push only",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
scriptSig: mustParseShortForm("1 DUP"),
testing for the case where a p2sh sigscript isn't pushonly. Also providing a defined error (from NewScript) for that case.
2013-06-25 14:12:15 +02:00
nSigOps: 0,
some more tests for GetPreciseSigOpsCount. total coverage now.
2013-06-24 17:32:41 +02:00
},
gofmt
2014-02-04 22:18:37 +01:00
{
testing for the case where a p2sh sigscript isn't pushonly. Also providing a defined error (from NewScript) for that case.
2013-06-25 14:12:15 +02:00
name: "scriptSig length 0",
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
scriptSig: nil,
testing for the case where a p2sh sigscript isn't pushonly. Also providing a defined error (from NewScript) for that case.
2013-06-25 14:12:15 +02:00
nSigOps: 0,
some more tests for GetPreciseSigOpsCount. total coverage now.
2013-06-24 17:32:41 +02:00
},
gofmt
2014-02-04 22:18:37 +01:00
{
some more tests for GetPreciseSigOpsCount. total coverage now.
2013-06-24 17:32:41 +02:00
name: "No script at the end",
// No script at end but still push only.
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
scriptSig: mustParseShortForm("1 1"),
testing for the case where a p2sh sigscript isn't pushonly. Also providing a defined error (from NewScript) for that case.
2013-06-25 14:12:15 +02:00
nSigOps: 0,
some more tests for GetPreciseSigOpsCount. total coverage now.
2013-06-24 17:32:41 +02:00
},
gofmt
2014-02-04 22:18:37 +01:00
{
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
name: "pushed script doesn't parse",
scriptSig: mustParseShortForm("DATA_2 PUSHDATA1 0x02"),
some more tests for GetPreciseSigOpsCount. total coverage now.
2013-06-24 17:32:41 +02:00
},
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
some more tests for GetPreciseSigOpsCount. total coverage now.
2013-06-24 17:32:41 +02:00
// The signature in the p2sh script is nonsensical for the tests since
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
// this script will never be executed. What matters is that it matches
some more tests for GetPreciseSigOpsCount. total coverage now.
2013-06-24 17:32:41 +02:00
// the right pattern.
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
pkScript := mustParseShortForm("HASH160 DATA_20 0x433ec2ac1ffa1b7b7d0" +
"27f564529c57197f9ae88 EQUAL")
for _, test := range tests {
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
count := GetPreciseSigOpCount(test.scriptSig, pkScript, true)
some more tests for GetPreciseSigOpsCount. total coverage now.
2013-06-24 17:32:41 +02:00
if count != test.nSigOps {
t.Errorf("%s: expected count of %d, got %d", test.name,
test.nSigOps, count)
}
}
Add functions to count the number of signature operations in a script. To be usd for validation. Most of the codepaths teste, a few tests missing for cases needed tests in the validation codepaths too. To be worked on in tree.
2013-06-20 19:07:44 +02:00
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
// TestRemoveOpcodes ensures that removing opcodes from scripts behaves as
// expected.
Initial implementation.
2013-06-12 23:35:27 +02:00
func TestRemoveOpcodes(t *testing.T) {
Make several of the reg tests more consistent. This commit modifies various regression tests to make them more consistent with other tests throughout the code base. Also, it allows of all the tests to run in parallel.
2015-01-29 21:39:44 +01:00
t.Parallel()
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
tests := []struct {
name string
before string
remove byte
err error
after string
}{
{
// Nothing to remove.
name: "nothing to remove",
before: "NOP",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
remove: OP_CODESEPARATOR,
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
after: "NOP",
},
{
// Test basic opcode removal.
name: "codeseparator 1",
before: "NOP CODESEPARATOR TRUE",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
remove: OP_CODESEPARATOR,
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
after: "NOP TRUE",
},
{
// The opcode in question is actually part of the data
// in a previous opcode.
name: "codeseparator by coincidence",
before: "NOP DATA_1 CODESEPARATOR TRUE",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
remove: OP_CODESEPARATOR,
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
after: "NOP DATA_1 CODESEPARATOR TRUE",
},
{
name: "invalid opcode",
before: "CAT",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
remove: OP_CODESEPARATOR,
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
after: "CAT",
},
{
name: "invalid length (insruction)",
before: "PUSHDATA1",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
remove: OP_CODESEPARATOR,
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
err: scriptError(ErrMalformedPush, ""),
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
},
{
name: "invalid length (data)",
before: "PUSHDATA1 0xff 0xfe",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
remove: OP_CODESEPARATOR,
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
err: scriptError(ErrMalformedPush, ""),
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
},
Initial implementation.
2013-06-12 23:35:27 +02:00
}
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
// tstRemoveOpcode is a convenience function to parse the provided
// raw script, remove the passed opcode, then unparse the result back
// into a raw script.
tstRemoveOpcode := func(script []byte, opcode byte) ([]byte, error) {
pops, err := parseScript(script)
if err != nil {
return nil, err
}
pops = removeOpcode(pops, opcode)
return unparseScript(pops)
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
for _, test := range tests {
before := mustParseShortForm(test.before)
after := mustParseShortForm(test.after)
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
result, err := tstRemoveOpcode(before, test.remove)
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
if e := tstCheckScriptError(err, test.err); e != nil {
t.Errorf("%s: %v", test.name, e)
continue
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
}
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
if !bytes.Equal(after, result) {
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
t.Errorf("%s: value does not equal expected: exp: %q"+
" got: %q", test.name, after, result)
Initial implementation.
2013-06-12 23:35:27 +02:00
}
}
}
txscript: Separate code for standard scripts. This commit moves all code related to standard scripts into a separate file named standard.go as well as the associated tests into standard_test.go. Since the code in address.go and address_test.go is only related to standard scripts, it has been combined into the new files and the old files deleted. The intent here is to make it clear that the code in standard.go is not related to consensus.
2015-05-01 22:20:07 +02:00
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
// TestRemoveOpcodeByData ensures that removing data carrying opcodes based on
// the data they contain works as expected.
func TestRemoveOpcodeByData(t *testing.T) {
Make several of the reg tests more consistent. This commit modifies various regression tests to make them more consistent with other tests throughout the code base. Also, it allows of all the tests to run in parallel.
2015-01-29 21:39:44 +01:00
t.Parallel()
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
tests := []struct {
name string
before []byte
remove []byte
err error
after []byte
}{
{
name: "nothing to do",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: []byte{OP_NOP},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
remove: []byte{1, 2, 3, 4},
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
after: []byte{OP_NOP},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
},
{
name: "simple case",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: []byte{OP_DATA_4, 1, 2, 3, 4},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
remove: []byte{1, 2, 3, 4},
after: nil,
},
{
name: "simple case (miss)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: []byte{OP_DATA_4, 1, 2, 3, 4},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
remove: []byte{1, 2, 3, 5},
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
after: []byte{OP_DATA_4, 1, 2, 3, 4},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
},
{
// padded to keep it canonical.
name: "simple case (pushdata1)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: append(append([]byte{OP_PUSHDATA1, 76},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
bytes.Repeat([]byte{0}, 72)...),
[]byte{1, 2, 3, 4}...),
remove: []byte{1, 2, 3, 4},
after: nil,
},
{
name: "simple case (pushdata1 miss)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: append(append([]byte{OP_PUSHDATA1, 76},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
bytes.Repeat([]byte{0}, 72)...),
[]byte{1, 2, 3, 4}...),
remove: []byte{1, 2, 3, 5},
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
after: append(append([]byte{OP_PUSHDATA1, 76},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
bytes.Repeat([]byte{0}, 72)...),
[]byte{1, 2, 3, 4}...),
},
{
name: "simple case (pushdata1 miss noncanonical)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: []byte{OP_PUSHDATA1, 4, 1, 2, 3, 4},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
remove: []byte{1, 2, 3, 4},
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
after: []byte{OP_PUSHDATA1, 4, 1, 2, 3, 4},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
},
{
name: "simple case (pushdata2)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: append(append([]byte{OP_PUSHDATA2, 0, 1},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
bytes.Repeat([]byte{0}, 252)...),
[]byte{1, 2, 3, 4}...),
remove: []byte{1, 2, 3, 4},
after: nil,
},
{
name: "simple case (pushdata2 miss)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: append(append([]byte{OP_PUSHDATA2, 0, 1},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
bytes.Repeat([]byte{0}, 252)...),
[]byte{1, 2, 3, 4}...),
remove: []byte{1, 2, 3, 4, 5},
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
after: append(append([]byte{OP_PUSHDATA2, 0, 1},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
bytes.Repeat([]byte{0}, 252)...),
[]byte{1, 2, 3, 4}...),
},
{
name: "simple case (pushdata2 miss noncanonical)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: []byte{OP_PUSHDATA2, 4, 0, 1, 2, 3, 4},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
remove: []byte{1, 2, 3, 4},
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
after: []byte{OP_PUSHDATA2, 4, 0, 1, 2, 3, 4},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
},
{
// This is padded to make the push canonical.
name: "simple case (pushdata4)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: append(append([]byte{OP_PUSHDATA4, 0, 0, 1, 0},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
bytes.Repeat([]byte{0}, 65532)...),
[]byte{1, 2, 3, 4}...),
remove: []byte{1, 2, 3, 4},
after: nil,
},
{
name: "simple case (pushdata4 miss noncanonical)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: []byte{OP_PUSHDATA4, 4, 0, 0, 0, 1, 2, 3, 4},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
remove: []byte{1, 2, 3, 4},
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
after: []byte{OP_PUSHDATA4, 4, 0, 0, 0, 1, 2, 3, 4},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
},
{
// This is padded to make the push canonical.
name: "simple case (pushdata4 miss)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: append(append([]byte{OP_PUSHDATA4, 0, 0, 1, 0},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
bytes.Repeat([]byte{0}, 65532)...), []byte{1, 2, 3, 4}...),
remove: []byte{1, 2, 3, 4, 5},
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
after: append(append([]byte{OP_PUSHDATA4, 0, 0, 1, 0},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
bytes.Repeat([]byte{0}, 65532)...), []byte{1, 2, 3, 4}...),
},
{
name: "invalid opcode ",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: []byte{OP_UNKNOWN187},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
remove: []byte{1, 2, 3, 4},
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
after: []byte{OP_UNKNOWN187},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
},
{
name: "invalid length (instruction)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: []byte{OP_PUSHDATA1},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
remove: []byte{1, 2, 3, 4},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
err: scriptError(ErrMalformedPush, ""),
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
},
{
name: "invalid length (data)",
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
before: []byte{OP_PUSHDATA1, 255, 254},
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
remove: []byte{1, 2, 3, 4},
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
err: scriptError(ErrMalformedPush, ""),
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
},
}
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
// tstRemoveOpcodeByData is a convenience function to parse the provided
// raw script, remove the passed data, then unparse the result back
// into a raw script.
tstRemoveOpcodeByData := func(script []byte, data []byte) ([]byte, error) {
pops, err := parseScript(script)
if err != nil {
return nil, err
}
pops = removeOpcodeByData(pops, data)
return unparseScript(pops)
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
for _, test := range tests {
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
result, err := tstRemoveOpcodeByData(test.before, test.remove)
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
if e := tstCheckScriptError(err, test.err); e != nil {
t.Errorf("%s: %v", test.name, e)
continue
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
}
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
if !bytes.Equal(test.after, result) {
txscript: Significantly improve errors. This converts the majority of script errors from generic errors created via errors.New and fmt.Errorf to use a concrete type that implements the error interface with an error code and description. This allows callers to programmatically detect the type of error via type assertions and an error code while still allowing the errors to provide more context. For example, instead of just having an error the reads "disabled opcode" as would happen prior to these changes when a disabled opcode is encountered, the error will now read "attempt to execute disabled opcode OP_FOO". While it was previously possible to programmatically detect many errors due to them being exported, they provided no additional context and there were also various instances that were just returning errors created on the spot which callers could not reliably detect without resorting to looking at the actual error message, which is nearly always bad practice. Also, while here, export the MaxStackSize and MaxScriptSize constants since they can be useful for consumers of the package and perform some minor cleanup of some of the tests.
2017-01-07 18:31:03 +01:00
t.Errorf("%s: value does not equal expected: exp: %q"+
" got: %q", test.name, test.after, result)
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
}
Initial implementation.
2013-06-12 23:35:27 +02:00
}
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
// TestIsPayToScriptHash ensures the IsPayToScriptHash function returns the
// expected results for all the scripts in scriptClassTests.
add IsPayToScriptHash api To tell ifa bytestream matches teh p2sh pattern.
2013-06-27 01:32:11 +02:00
func TestIsPayToScriptHash(t *testing.T) {
Make several of the reg tests more consistent. This commit modifies various regression tests to make them more consistent with other tests throughout the code base. Also, it allows of all the tests to run in parallel.
2015-01-29 21:39:44 +01:00
t.Parallel()
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
for _, test := range scriptClassTests {
script := mustParseShortForm(test.script)
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
shouldBe := (test.class == ScriptHashTy)
p2sh := IsPayToScriptHash(script)
add IsPayToScriptHash api To tell ifa bytestream matches teh p2sh pattern.
2013-06-27 01:32:11 +02:00
if p2sh != shouldBe {
BIP0141+txscript: awareness of new standard script templates, add helper funcs This commit introduces a series of internal and external helper functions which enable the txscript package to be aware of the new standard script templates introduced as part of BIP0141. The two new standard script templates recognized are pay-to-witness-key-hash (P2WKH) and pay-to-witness-script-hash (P2WSH).
2016-10-19 02:45:40 +02:00
t.Errorf("%s: expected p2sh %v, got %v", test.name,
add IsPayToScriptHash api To tell ifa bytestream matches teh p2sh pattern.
2013-06-27 01:32:11 +02:00
shouldBe, p2sh)
}
}
}
BIP0141+txscript: awareness of new standard script templates, add helper funcs This commit introduces a series of internal and external helper functions which enable the txscript package to be aware of the new standard script templates introduced as part of BIP0141. The two new standard script templates recognized are pay-to-witness-key-hash (P2WKH) and pay-to-witness-script-hash (P2WSH).
2016-10-19 02:45:40 +02:00
// TestIsPayToWitnessScriptHash ensures the IsPayToWitnessScriptHash function
// returns the expected results for all the scripts in scriptClassTests.
func TestIsPayToWitnessScriptHash(t *testing.T) {
t.Parallel()
for _, test := range scriptClassTests {
script := mustParseShortForm(test.script)
shouldBe := (test.class == WitnessV0ScriptHashTy)
p2wsh := IsPayToWitnessScriptHash(script)
if p2wsh != shouldBe {
t.Errorf("%s: expected p2wsh %v, got %v", test.name,
shouldBe, p2wsh)
}
}
}
// TestIsPayToWitnessPubKeyHash ensures the IsPayToWitnessPubKeyHash function
// returns the expected results for all the scripts in scriptClassTests.
func TestIsPayToWitnessPubKeyHash(t *testing.T) {
t.Parallel()
for _, test := range scriptClassTests {
script := mustParseShortForm(test.script)
shouldBe := (test.class == WitnessV0PubKeyHashTy)
p2wkh := IsPayToWitnessPubKeyHash(script)
if p2wkh != shouldBe {
t.Errorf("%s: expected p2wkh %v, got %v", test.name,
shouldBe, p2wkh)
}
}
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
// TestHasCanonicalPushes ensures the canonicalPush function properly determines
// what is considered a canonical push for the purposes of removeOpcodeByData.
More tests Tests for IsPushOnlyScript, HasCanonicalPushes, and CalcMultiSigStats
2014-08-08 13:46:15 +02:00
func TestHasCanonicalPushes(t *testing.T) {
Make several of the reg tests more consistent. This commit modifies various regression tests to make them more consistent with other tests throughout the code base. Also, it allows of all the tests to run in parallel.
2015-01-29 21:39:44 +01:00
t.Parallel()
More tests Tests for IsPushOnlyScript, HasCanonicalPushes, and CalcMultiSigStats
2014-08-08 13:46:15 +02:00
tests := []struct {
name string
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
script string
More tests Tests for IsPushOnlyScript, HasCanonicalPushes, and CalcMultiSigStats
2014-08-08 13:46:15 +02:00
expected bool
}{
{
name: "does not parse",
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
script: "0x046708afdb0fe5548271967f1a67130b7105cd6a82" +
"8e03909a67962e0ea1f61d",
More tests Tests for IsPushOnlyScript, HasCanonicalPushes, and CalcMultiSigStats
2014-08-08 13:46:15 +02:00
expected: false,
},
{
name: "non-canonical push",
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
script: "PUSHDATA1 0x04 0x01020304",
More tests Tests for IsPushOnlyScript, HasCanonicalPushes, and CalcMultiSigStats
2014-08-08 13:46:15 +02:00
expected: false,
},
}
for i, test := range tests {
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
script := mustParseShortForm(test.script)
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
pops, err := parseScript(script)
Use ScriptVerifyMinimalData Additionally, drop HasCanoncialPushes as ScriptVerifyMinimalData offers more complete checks.
2015-02-25 02:11:57 +01:00
if err != nil {
if test.expected {
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
t.Errorf("TstParseScript #%d failed: %v", i, err)
Use ScriptVerifyMinimalData Additionally, drop HasCanoncialPushes as ScriptVerifyMinimalData offers more complete checks.
2015-02-25 02:11:57 +01:00
}
continue
}
for _, pop := range pops {
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
if canonicalPush(pop) != test.expected {
t.Errorf("canonicalPush: #%d (%s) wrong result"+
"\ngot: %v\nwant: %v", i, test.name,
true, test.expected)
Use ScriptVerifyMinimalData Additionally, drop HasCanoncialPushes as ScriptVerifyMinimalData offers more complete checks.
2015-02-25 02:11:57 +01:00
break
}
More tests Tests for IsPushOnlyScript, HasCanonicalPushes, and CalcMultiSigStats
2014-08-08 13:46:15 +02:00
}
}
}
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
// TestIsPushOnlyScript ensures the IsPushOnlyScript function returns the
// expected results.
More tests Tests for IsPushOnlyScript, HasCanonicalPushes, and CalcMultiSigStats
2014-08-08 13:46:15 +02:00
func TestIsPushOnlyScript(t *testing.T) {
Make several of the reg tests more consistent. This commit modifies various regression tests to make them more consistent with other tests throughout the code base. Also, it allows of all the tests to run in parallel.
2015-01-29 21:39:44 +01:00
t.Parallel()
More tests Tests for IsPushOnlyScript, HasCanonicalPushes, and CalcMultiSigStats
2014-08-08 13:46:15 +02:00
test := struct {
name string
script []byte
expected bool
}{
name: "does not parse",
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
script: mustParseShortForm("0x046708afdb0fe5548271967f1a67130" +
"b7105cd6a828e03909a67962e0ea1f61d"),
More tests Tests for IsPushOnlyScript, HasCanonicalPushes, and CalcMultiSigStats
2014-08-08 13:46:15 +02:00
expected: false,
}
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
if IsPushOnlyScript(test.script) != test.expected {
txscript: Test consistency and cleanup. - Move reference tests to test package since they are intended to exercise the engine as callers would - Improve the short form script parsing to allow additional opcodes: DATA_#, OP_#, FALSE, TRUE - Make use of a function to decode hex strings rather than manually defining byte slices - Update the tests to make use of the short form script parsing logic rather than manually defining byte slices - Consistently replace all []byte{} and [][]byte{} with nil - Define tests only used in a specific function inside that func - Move invalid flag combination test to engine_test since that is what it is testing - Remove all redundant script tests in favor of the JSON-based tests in the data directory. - Move several functions from internal_test.go to the test files associated with what the tests are checking
2015-05-02 21:56:55 +02:00
t.Errorf("IsPushOnlyScript (%s) wrong result\ngot: %v\nwant: "+
"%v", test.name, true, test.expected)
txscript: Add new flag ScriptVerifyCleanStack The ScriptVerifyCleanStack flag requires that only a single stack element remains after evaluation and that when interpreted as a bool, it must be true. This is BIP0062, rule 6. This mimics Bitcoin Core commit b6e03cc59208305681745ad06f2056ffe6690597
2015-02-25 21:04:37 +01:00
}
}
txscript: New function IsUnspendable IsUnspendable takes a public key script and returns whether it is spendable. Additionally, hook this into the mempool isDust function, since unspendable outputs can't be spent. This mimics Bitcoin Core commit 0aad1f13b2430165062bf9436036c1222a8724da
2015-08-01 16:43:06 +02:00
// TestIsUnspendable ensures the IsUnspendable function returns the expected
// results.
func TestIsUnspendable(t *testing.T) {
t.Parallel()
tests := []struct {
name string
pkScript []byte
expected bool
}{
{
// Unspendable
pkScript: []byte{0x6a, 0x04, 0x74, 0x65, 0x73, 0x74},
expected: true,
},
{
// Spendable
pkScript: []byte{0x76, 0xa9, 0x14, 0x29, 0x95, 0xa0,
0xfe, 0x68, 0x43, 0xfa, 0x9b, 0x95, 0x45,
0x97, 0xf0, 0xdc, 0xa7, 0xa4, 0x4d, 0xf6,
0xfa, 0x0b, 0x5c, 0x88, 0xac},
expected: false,
},
}
for i, test := range tests {
txscript: Consolidate tests into txscript package. Putting the test code in the same package makes it easier for forks since they don't have to change the import paths as much and it also gets rid of the need for internal_test.go to bridge. Also, do some light cleanup on a few tests while here.
2016-10-20 08:18:31 +02:00
res := IsUnspendable(test.pkScript)
txscript: New function IsUnspendable IsUnspendable takes a public key script and returns whether it is spendable. Additionally, hook this into the mempool isDust function, since unspendable outputs can't be spent. This mimics Bitcoin Core commit 0aad1f13b2430165062bf9436036c1222a8724da
2015-08-01 16:43:06 +02:00
if res != test.expected {
t.Errorf("TestIsUnspendable #%d failed: got %v want %v",
i, res, test.expected)
continue
}
}
}
Reference in a new issue Copy permalink