2016-02-03 15:24:28 +01:00
|
|
|
// Copyright (c) 2015-2016 The btcsuite developers
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
// Use of this source code is governed by an ISC
|
|
|
|
// license that can be found in the LICENSE file.
|
|
|
|
|
|
|
|
package peer_test
|
|
|
|
|
|
|
|
import (
|
|
|
|
"errors"
|
|
|
|
"io"
|
|
|
|
"net"
|
|
|
|
"strconv"
|
|
|
|
"testing"
|
|
|
|
"time"
|
|
|
|
|
|
|
|
"github.com/btcsuite/btcd/chaincfg"
|
|
|
|
"github.com/btcsuite/btcd/peer"
|
|
|
|
"github.com/btcsuite/btcd/wire"
|
|
|
|
"github.com/btcsuite/go-socks/socks"
|
|
|
|
)
|
|
|
|
|
|
|
|
// conn mocks a network connection by implementing the net.Conn interface. It
|
|
|
|
// is used to test peer connection without actually opening a network
|
|
|
|
// connection.
|
|
|
|
type conn struct {
|
|
|
|
io.Reader
|
|
|
|
io.Writer
|
|
|
|
io.Closer
|
|
|
|
|
|
|
|
// local network, address for the connection.
|
|
|
|
lnet, laddr string
|
|
|
|
|
|
|
|
// remote network, address for the connection.
|
|
|
|
rnet, raddr string
|
|
|
|
|
|
|
|
// mocks socks proxy if true
|
|
|
|
proxy bool
|
|
|
|
}
|
|
|
|
|
|
|
|
// LocalAddr returns the local address for the connection.
|
|
|
|
func (c conn) LocalAddr() net.Addr {
|
|
|
|
return &addr{c.lnet, c.laddr}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Remote returns the remote address for the connection.
|
|
|
|
func (c conn) RemoteAddr() net.Addr {
|
|
|
|
if !c.proxy {
|
|
|
|
return &addr{c.rnet, c.raddr}
|
|
|
|
}
|
|
|
|
host, strPort, _ := net.SplitHostPort(c.raddr)
|
|
|
|
port, _ := strconv.Atoi(strPort)
|
|
|
|
return &socks.ProxiedAddr{
|
|
|
|
Net: c.rnet,
|
|
|
|
Host: host,
|
|
|
|
Port: port,
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Close handles closing the connection.
|
|
|
|
func (c conn) Close() error {
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
func (c conn) SetDeadline(t time.Time) error { return nil }
|
|
|
|
func (c conn) SetReadDeadline(t time.Time) error { return nil }
|
|
|
|
func (c conn) SetWriteDeadline(t time.Time) error { return nil }
|
|
|
|
|
|
|
|
// addr mocks a network address
|
|
|
|
type addr struct {
|
|
|
|
net, address string
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m addr) Network() string { return m.net }
|
|
|
|
func (m addr) String() string { return m.address }
|
|
|
|
|
|
|
|
// pipe turns two mock connections into a full-duplex connection similar to
|
|
|
|
// net.Pipe to allow pipe's with (fake) addresses.
|
|
|
|
func pipe(c1, c2 *conn) (*conn, *conn) {
|
|
|
|
r1, w1 := io.Pipe()
|
|
|
|
r2, w2 := io.Pipe()
|
|
|
|
|
|
|
|
c1.Writer = w1
|
|
|
|
c2.Reader = r1
|
|
|
|
c1.Reader = r2
|
|
|
|
c2.Writer = w2
|
|
|
|
|
|
|
|
return c1, c2
|
|
|
|
}
|
|
|
|
|
|
|
|
// peerStats holds the expected peer stats used for testing peer.
|
|
|
|
type peerStats struct {
|
|
|
|
wantUserAgent string
|
|
|
|
wantServices wire.ServiceFlag
|
|
|
|
wantProtocolVersion uint32
|
|
|
|
wantConnected bool
|
|
|
|
wantVersionKnown bool
|
|
|
|
wantVerAckReceived bool
|
|
|
|
wantLastBlock int32
|
|
|
|
wantStartingHeight int32
|
|
|
|
wantLastPingTime time.Time
|
|
|
|
wantLastPingNonce uint64
|
|
|
|
wantLastPingMicros int64
|
|
|
|
wantTimeOffset int64
|
|
|
|
wantBytesSent uint64
|
|
|
|
wantBytesReceived uint64
|
|
|
|
}
|
|
|
|
|
|
|
|
// testPeer tests the given peer's flags and stats
|
|
|
|
func testPeer(t *testing.T, p *peer.Peer, s peerStats) {
|
|
|
|
if p.UserAgent() != s.wantUserAgent {
|
|
|
|
t.Errorf("testPeer: wrong UserAgent - got %v, want %v", p.UserAgent(), s.wantUserAgent)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.Services() != s.wantServices {
|
|
|
|
t.Errorf("testPeer: wrong Services - got %v, want %v", p.Services(), s.wantServices)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if !p.LastPingTime().Equal(s.wantLastPingTime) {
|
|
|
|
t.Errorf("testPeer: wrong LastPingTime - got %v, want %v", p.LastPingTime(), s.wantLastPingTime)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.LastPingNonce() != s.wantLastPingNonce {
|
|
|
|
t.Errorf("testPeer: wrong LastPingNonce - got %v, want %v", p.LastPingNonce(), s.wantLastPingNonce)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.LastPingMicros() != s.wantLastPingMicros {
|
|
|
|
t.Errorf("testPeer: wrong LastPingMicros - got %v, want %v", p.LastPingMicros(), s.wantLastPingMicros)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.VerAckReceived() != s.wantVerAckReceived {
|
|
|
|
t.Errorf("testPeer: wrong VerAckReceived - got %v, want %v", p.VerAckReceived(), s.wantVerAckReceived)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.VersionKnown() != s.wantVersionKnown {
|
|
|
|
t.Errorf("testPeer: wrong VersionKnown - got %v, want %v", p.VersionKnown(), s.wantVersionKnown)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.ProtocolVersion() != s.wantProtocolVersion {
|
|
|
|
t.Errorf("testPeer: wrong ProtocolVersion - got %v, want %v", p.ProtocolVersion(), s.wantProtocolVersion)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.LastBlock() != s.wantLastBlock {
|
|
|
|
t.Errorf("testPeer: wrong LastBlock - got %v, want %v", p.LastBlock(), s.wantLastBlock)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
2015-11-09 20:25:50 +01:00
|
|
|
// Allow for a deviation of 1s, as the second may tick when the message is
|
|
|
|
// in transit and the protocol doesn't support any further precision.
|
|
|
|
if p.TimeOffset() != s.wantTimeOffset && p.TimeOffset() != s.wantTimeOffset-1 {
|
|
|
|
t.Errorf("testPeer: wrong TimeOffset - got %v, want %v or %v", p.TimeOffset(),
|
|
|
|
s.wantTimeOffset, s.wantTimeOffset-1)
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.BytesSent() != s.wantBytesSent {
|
|
|
|
t.Errorf("testPeer: wrong BytesSent - got %v, want %v", p.BytesSent(), s.wantBytesSent)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.BytesReceived() != s.wantBytesReceived {
|
|
|
|
t.Errorf("testPeer: wrong BytesReceived - got %v, want %v", p.BytesReceived(), s.wantBytesReceived)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.StartingHeight() != s.wantStartingHeight {
|
|
|
|
t.Errorf("testPeer: wrong StartingHeight - got %v, want %v", p.StartingHeight(), s.wantStartingHeight)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.Connected() != s.wantConnected {
|
|
|
|
t.Errorf("testPeer: wrong Connected - got %v, want %v", p.Connected(), s.wantConnected)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
stats := p.StatsSnapshot()
|
|
|
|
|
|
|
|
if p.ID() != stats.ID {
|
|
|
|
t.Errorf("testPeer: wrong ID - got %v, want %v", p.ID(), stats.ID)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.Addr() != stats.Addr {
|
|
|
|
t.Errorf("testPeer: wrong Addr - got %v, want %v", p.Addr(), stats.Addr)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.LastSend() != stats.LastSend {
|
|
|
|
t.Errorf("testPeer: wrong LastSend - got %v, want %v", p.LastSend(), stats.LastSend)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
if p.LastRecv() != stats.LastRecv {
|
|
|
|
t.Errorf("testPeer: wrong LastRecv - got %v, want %v", p.LastRecv(), stats.LastRecv)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// TestPeerConnection tests connection between inbound and outbound peers.
|
|
|
|
func TestPeerConnection(t *testing.T) {
|
|
|
|
verack := make(chan struct{}, 1)
|
|
|
|
peerCfg := &peer.Config{
|
|
|
|
Listeners: peer.MessageListeners{
|
|
|
|
OnWrite: func(p *peer.Peer, bytesWritten int, msg wire.Message, err error) {
|
|
|
|
switch msg.(type) {
|
|
|
|
case *wire.MsgVerAck:
|
|
|
|
verack <- struct{}{}
|
|
|
|
}
|
|
|
|
},
|
|
|
|
},
|
|
|
|
UserAgentName: "peer",
|
|
|
|
UserAgentVersion: "1.0",
|
|
|
|
ChainParams: &chaincfg.MainNetParams,
|
|
|
|
Services: 0,
|
|
|
|
}
|
|
|
|
wantStats := peerStats{
|
|
|
|
wantUserAgent: wire.DefaultUserAgent + "peer:1.0/",
|
|
|
|
wantServices: 0,
|
|
|
|
wantProtocolVersion: peer.MaxProtocolVersion,
|
|
|
|
wantConnected: true,
|
|
|
|
wantVersionKnown: true,
|
|
|
|
wantVerAckReceived: true,
|
|
|
|
wantLastPingTime: time.Time{},
|
|
|
|
wantLastPingNonce: uint64(0),
|
|
|
|
wantLastPingMicros: int64(0),
|
|
|
|
wantTimeOffset: int64(0),
|
|
|
|
wantBytesSent: 158, // 134 version + 24 verack
|
|
|
|
wantBytesReceived: 158,
|
|
|
|
}
|
|
|
|
tests := []struct {
|
|
|
|
name string
|
|
|
|
setup func() (*peer.Peer, *peer.Peer, error)
|
|
|
|
}{
|
|
|
|
{
|
|
|
|
"basic handshake",
|
|
|
|
func() (*peer.Peer, *peer.Peer, error) {
|
|
|
|
inConn, outConn := pipe(
|
|
|
|
&conn{raddr: "10.0.0.1:8333"},
|
|
|
|
&conn{raddr: "10.0.0.2:8333"},
|
|
|
|
)
|
2016-02-03 15:24:28 +01:00
|
|
|
inPeer := peer.NewInboundPeer(peerCfg)
|
|
|
|
if err := inPeer.Connect(inConn); err != nil {
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
return nil, nil, err
|
|
|
|
}
|
|
|
|
outPeer, err := peer.NewOutboundPeer(peerCfg, "10.0.0.2:8333")
|
|
|
|
if err != nil {
|
|
|
|
return nil, nil, err
|
|
|
|
}
|
|
|
|
if err := outPeer.Connect(outConn); err != nil {
|
|
|
|
return nil, nil, err
|
|
|
|
}
|
2016-02-03 15:24:28 +01:00
|
|
|
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
for i := 0; i < 2; i++ {
|
|
|
|
select {
|
|
|
|
case <-verack:
|
|
|
|
case <-time.After(time.Second * 1):
|
|
|
|
return nil, nil, errors.New("verack timeout")
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return inPeer, outPeer, nil
|
|
|
|
},
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"socks proxy",
|
|
|
|
func() (*peer.Peer, *peer.Peer, error) {
|
|
|
|
inConn, outConn := pipe(
|
|
|
|
&conn{raddr: "10.0.0.1:8333", proxy: true},
|
|
|
|
&conn{raddr: "10.0.0.2:8333"},
|
|
|
|
)
|
2016-02-03 15:24:28 +01:00
|
|
|
inPeer := peer.NewInboundPeer(peerCfg)
|
|
|
|
if err := inPeer.Connect(inConn); err != nil {
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
return nil, nil, err
|
|
|
|
}
|
|
|
|
outPeer, err := peer.NewOutboundPeer(peerCfg, "10.0.0.2:8333")
|
|
|
|
if err != nil {
|
|
|
|
return nil, nil, err
|
|
|
|
}
|
|
|
|
if err := outPeer.Connect(outConn); err != nil {
|
|
|
|
return nil, nil, err
|
|
|
|
}
|
|
|
|
for i := 0; i < 2; i++ {
|
|
|
|
select {
|
|
|
|
case <-verack:
|
|
|
|
case <-time.After(time.Second * 1):
|
|
|
|
return nil, nil, errors.New("verack timeout")
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return inPeer, outPeer, nil
|
|
|
|
},
|
|
|
|
},
|
|
|
|
}
|
|
|
|
t.Logf("Running %d tests", len(tests))
|
|
|
|
for i, test := range tests {
|
|
|
|
inPeer, outPeer, err := test.setup()
|
|
|
|
if err != nil {
|
|
|
|
t.Errorf("TestPeerConnection setup #%d: unexpected err %v\n", i, err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
testPeer(t, inPeer, wantStats)
|
|
|
|
testPeer(t, outPeer, wantStats)
|
|
|
|
|
2016-02-03 15:24:28 +01:00
|
|
|
inPeer.Disconnect()
|
|
|
|
outPeer.Disconnect()
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// TestPeerListeners tests that the peer listeners are called as expected.
|
|
|
|
func TestPeerListeners(t *testing.T) {
|
|
|
|
verack := make(chan struct{}, 1)
|
|
|
|
ok := make(chan wire.Message, 20)
|
|
|
|
peerCfg := &peer.Config{
|
|
|
|
Listeners: peer.MessageListeners{
|
|
|
|
OnGetAddr: func(p *peer.Peer, msg *wire.MsgGetAddr) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnAddr: func(p *peer.Peer, msg *wire.MsgAddr) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnPing: func(p *peer.Peer, msg *wire.MsgPing) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnPong: func(p *peer.Peer, msg *wire.MsgPong) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnAlert: func(p *peer.Peer, msg *wire.MsgAlert) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnMemPool: func(p *peer.Peer, msg *wire.MsgMemPool) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnTx: func(p *peer.Peer, msg *wire.MsgTx) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnBlock: func(p *peer.Peer, msg *wire.MsgBlock, buf []byte) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnInv: func(p *peer.Peer, msg *wire.MsgInv) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnHeaders: func(p *peer.Peer, msg *wire.MsgHeaders) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnNotFound: func(p *peer.Peer, msg *wire.MsgNotFound) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnGetData: func(p *peer.Peer, msg *wire.MsgGetData) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnGetBlocks: func(p *peer.Peer, msg *wire.MsgGetBlocks) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnGetHeaders: func(p *peer.Peer, msg *wire.MsgGetHeaders) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnFilterAdd: func(p *peer.Peer, msg *wire.MsgFilterAdd) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnFilterClear: func(p *peer.Peer, msg *wire.MsgFilterClear) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnFilterLoad: func(p *peer.Peer, msg *wire.MsgFilterLoad) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnMerkleBlock: func(p *peer.Peer, msg *wire.MsgMerkleBlock) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnVersion: func(p *peer.Peer, msg *wire.MsgVersion) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
|
|
|
OnVerAck: func(p *peer.Peer, msg *wire.MsgVerAck) {
|
|
|
|
verack <- struct{}{}
|
|
|
|
},
|
|
|
|
OnReject: func(p *peer.Peer, msg *wire.MsgReject) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
2016-04-06 23:56:48 +02:00
|
|
|
OnSendHeaders: func(p *peer.Peer, msg *wire.MsgSendHeaders) {
|
|
|
|
ok <- msg
|
|
|
|
},
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
},
|
|
|
|
UserAgentName: "peer",
|
|
|
|
UserAgentVersion: "1.0",
|
|
|
|
ChainParams: &chaincfg.MainNetParams,
|
|
|
|
Services: wire.SFNodeBloom,
|
|
|
|
}
|
|
|
|
inConn, outConn := pipe(
|
|
|
|
&conn{raddr: "10.0.0.1:8333"},
|
|
|
|
&conn{raddr: "10.0.0.2:8333"},
|
|
|
|
)
|
2016-02-03 15:24:28 +01:00
|
|
|
inPeer := peer.NewInboundPeer(peerCfg)
|
|
|
|
if err := inPeer.Connect(inConn); err != nil {
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
t.Errorf("TestPeerListeners: unexpected err %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
peerCfg.Listeners = peer.MessageListeners{
|
|
|
|
OnVerAck: func(p *peer.Peer, msg *wire.MsgVerAck) {
|
|
|
|
verack <- struct{}{}
|
|
|
|
},
|
|
|
|
}
|
|
|
|
outPeer, err := peer.NewOutboundPeer(peerCfg, "10.0.0.1:8333")
|
|
|
|
if err != nil {
|
|
|
|
t.Errorf("NewOutboundPeer: unexpected err %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if err := outPeer.Connect(outConn); err != nil {
|
|
|
|
t.Errorf("TestPeerListeners: unexpected err %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
for i := 0; i < 2; i++ {
|
|
|
|
select {
|
|
|
|
case <-verack:
|
|
|
|
case <-time.After(time.Second * 1):
|
|
|
|
t.Errorf("TestPeerListeners: verack timeout\n")
|
|
|
|
return
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
tests := []struct {
|
|
|
|
listener string
|
|
|
|
msg wire.Message
|
|
|
|
}{
|
|
|
|
{
|
|
|
|
"OnGetAddr",
|
|
|
|
wire.NewMsgGetAddr(),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnAddr",
|
|
|
|
wire.NewMsgAddr(),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnPing",
|
|
|
|
wire.NewMsgPing(42),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnPong",
|
|
|
|
wire.NewMsgPong(42),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnAlert",
|
|
|
|
wire.NewMsgAlert([]byte("payload"), []byte("signature")),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnMemPool",
|
|
|
|
wire.NewMsgMemPool(),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnTx",
|
|
|
|
wire.NewMsgTx(),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnBlock",
|
|
|
|
wire.NewMsgBlock(wire.NewBlockHeader(&wire.ShaHash{}, &wire.ShaHash{}, 1, 1)),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnInv",
|
|
|
|
wire.NewMsgInv(),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnHeaders",
|
|
|
|
wire.NewMsgHeaders(),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnNotFound",
|
|
|
|
wire.NewMsgNotFound(),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnGetData",
|
|
|
|
wire.NewMsgGetData(),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnGetBlocks",
|
|
|
|
wire.NewMsgGetBlocks(&wire.ShaHash{}),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnGetHeaders",
|
|
|
|
wire.NewMsgGetHeaders(),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnFilterAdd",
|
|
|
|
wire.NewMsgFilterAdd([]byte{0x01}),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnFilterClear",
|
|
|
|
wire.NewMsgFilterClear(),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnFilterLoad",
|
|
|
|
wire.NewMsgFilterLoad([]byte{0x01}, 10, 0, wire.BloomUpdateNone),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
"OnMerkleBlock",
|
|
|
|
wire.NewMsgMerkleBlock(wire.NewBlockHeader(&wire.ShaHash{}, &wire.ShaHash{}, 1, 1)),
|
|
|
|
},
|
|
|
|
// only one version message is allowed
|
|
|
|
// only one verack message is allowed
|
|
|
|
{
|
2016-04-06 23:56:48 +02:00
|
|
|
"OnReject",
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
wire.NewMsgReject("block", wire.RejectDuplicate, "dupe block"),
|
|
|
|
},
|
2016-04-06 23:56:48 +02:00
|
|
|
{
|
|
|
|
"OnSendHeaders",
|
|
|
|
wire.NewMsgSendHeaders(),
|
|
|
|
},
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
}
|
|
|
|
t.Logf("Running %d tests", len(tests))
|
|
|
|
for _, test := range tests {
|
|
|
|
// Queue the test message
|
|
|
|
outPeer.QueueMessage(test.msg, nil)
|
|
|
|
select {
|
|
|
|
case <-ok:
|
|
|
|
case <-time.After(time.Second * 1):
|
|
|
|
t.Errorf("TestPeerListeners: %s timeout", test.listener)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
}
|
2016-02-03 15:24:28 +01:00
|
|
|
inPeer.Disconnect()
|
|
|
|
outPeer.Disconnect()
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
// TestOutboundPeer tests that the outbound peer works as expected.
|
|
|
|
func TestOutboundPeer(t *testing.T) {
|
|
|
|
// Use a mock NewestBlock func to test errs
|
|
|
|
var errBlockNotFound = errors.New("newest block not found")
|
|
|
|
var mockNewestSha = func() (*wire.ShaHash, int32, error) {
|
|
|
|
return nil, 0, errBlockNotFound
|
|
|
|
}
|
|
|
|
|
|
|
|
peerCfg := &peer.Config{
|
|
|
|
NewestBlock: mockNewestSha,
|
|
|
|
UserAgentName: "peer",
|
|
|
|
UserAgentVersion: "1.0",
|
|
|
|
ChainParams: &chaincfg.MainNetParams,
|
|
|
|
Services: 0,
|
|
|
|
}
|
|
|
|
|
|
|
|
r, w := io.Pipe()
|
|
|
|
c := &conn{raddr: "10.0.0.1:8333", Writer: w, Reader: r}
|
|
|
|
|
|
|
|
p, err := peer.NewOutboundPeer(peerCfg, "10.0.0.1:8333")
|
|
|
|
if err != nil {
|
|
|
|
t.Errorf("NewOutboundPeer: unexpected err - %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
wantErr := errBlockNotFound
|
|
|
|
if err := p.Connect(c); err != wantErr {
|
|
|
|
t.Errorf("Connect: expected err %v, got %v\n", wantErr, err)
|
|
|
|
return
|
|
|
|
}
|
2016-02-03 15:24:28 +01:00
|
|
|
|
|
|
|
// Test already connected.
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
if err := p.Connect(c); err != nil {
|
|
|
|
t.Errorf("Connect: unexpected err %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
// Test Queue Inv
|
2016-02-25 17:47:46 +01:00
|
|
|
fakeBlockHash := &wire.ShaHash{0: 0x00, 1: 0x01}
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
fakeInv := wire.NewInvVect(wire.InvTypeBlock, fakeBlockHash)
|
|
|
|
p.QueueInventory(fakeInv)
|
|
|
|
p.AddKnownInventory(fakeInv)
|
|
|
|
p.QueueInventory(fakeInv)
|
|
|
|
|
|
|
|
// Test Queue Message
|
|
|
|
fakeMsg := wire.NewMsgVerAck()
|
|
|
|
p.QueueMessage(fakeMsg, nil)
|
2015-11-12 18:52:58 +01:00
|
|
|
done := make(chan struct{})
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
p.QueueMessage(fakeMsg, done)
|
|
|
|
<-done
|
2016-02-03 15:24:28 +01:00
|
|
|
p.Disconnect()
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
|
|
|
|
// Test NewestBlock
|
|
|
|
var newestBlock = func() (*wire.ShaHash, int32, error) {
|
|
|
|
hashStr := "14a0810ac680a3eb3f82edc878cea25ec41d6b790744e5daeef"
|
|
|
|
hash, err := wire.NewShaHashFromStr(hashStr)
|
|
|
|
if err != nil {
|
|
|
|
return nil, 0, err
|
|
|
|
}
|
|
|
|
return hash, 234439, nil
|
|
|
|
}
|
|
|
|
peerCfg.NewestBlock = newestBlock
|
2015-11-12 18:52:58 +01:00
|
|
|
r1, w1 := io.Pipe()
|
|
|
|
c1 := &conn{raddr: "10.0.0.1:8333", Writer: w1, Reader: r1}
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
p1, err := peer.NewOutboundPeer(peerCfg, "10.0.0.1:8333")
|
|
|
|
if err != nil {
|
|
|
|
t.Errorf("NewOutboundPeer: unexpected err - %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
2015-11-12 18:52:58 +01:00
|
|
|
if err := p1.Connect(c1); err != nil {
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
t.Errorf("Connect: unexpected err %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
// Test update latest block
|
|
|
|
latestBlockSha, err := wire.NewShaHashFromStr("1a63f9cdff1752e6375c8c76e543a71d239e1a2e5c6db1aa679")
|
|
|
|
if err != nil {
|
|
|
|
t.Errorf("NewShaHashFromStr: unexpected err %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
p1.UpdateLastAnnouncedBlock(latestBlockSha)
|
|
|
|
p1.UpdateLastBlockHeight(234440)
|
|
|
|
if p1.LastAnnouncedBlock() != latestBlockSha {
|
|
|
|
t.Errorf("LastAnnouncedBlock: wrong block - got %v, want %v",
|
|
|
|
p1.LastAnnouncedBlock(), latestBlockSha)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
// Test Queue Inv after connection
|
|
|
|
p1.QueueInventory(fakeInv)
|
2016-02-03 15:24:28 +01:00
|
|
|
p1.Disconnect()
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
|
|
|
|
// Test regression
|
|
|
|
peerCfg.ChainParams = &chaincfg.RegressionNetParams
|
|
|
|
peerCfg.Services = wire.SFNodeBloom
|
2015-11-12 18:52:58 +01:00
|
|
|
r2, w2 := io.Pipe()
|
|
|
|
c2 := &conn{raddr: "10.0.0.1:8333", Writer: w2, Reader: r2}
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
p2, err := peer.NewOutboundPeer(peerCfg, "10.0.0.1:8333")
|
|
|
|
if err != nil {
|
|
|
|
t.Errorf("NewOutboundPeer: unexpected err - %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
2015-11-12 18:52:58 +01:00
|
|
|
if err := p2.Connect(c2); err != nil {
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
t.Errorf("Connect: unexpected err %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
// Test PushXXX
|
|
|
|
var addrs []*wire.NetAddress
|
|
|
|
for i := 0; i < 5; i++ {
|
|
|
|
na := wire.NetAddress{}
|
|
|
|
addrs = append(addrs, &na)
|
|
|
|
}
|
|
|
|
if _, err := p2.PushAddrMsg(addrs); err != nil {
|
|
|
|
t.Errorf("PushAddrMsg: unexpected err %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if err := p2.PushGetBlocksMsg(nil, &wire.ShaHash{}); err != nil {
|
|
|
|
t.Errorf("PushGetBlocksMsg: unexpected err %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
if err := p2.PushGetHeadersMsg(nil, &wire.ShaHash{}); err != nil {
|
|
|
|
t.Errorf("PushGetHeadersMsg: unexpected err %v\n", err)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
p2.PushRejectMsg("block", wire.RejectMalformed, "malformed", nil, true)
|
|
|
|
p2.PushRejectMsg("block", wire.RejectInvalid, "invalid", nil, false)
|
|
|
|
|
|
|
|
// Test Queue Messages
|
2015-11-12 18:52:58 +01:00
|
|
|
p2.QueueMessage(wire.NewMsgGetAddr(), nil)
|
|
|
|
p2.QueueMessage(wire.NewMsgPing(1), nil)
|
|
|
|
p2.QueueMessage(wire.NewMsgMemPool(), nil)
|
|
|
|
p2.QueueMessage(wire.NewMsgGetData(), nil)
|
|
|
|
p2.QueueMessage(wire.NewMsgGetHeaders(), nil)
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
|
2016-02-03 15:24:28 +01:00
|
|
|
p2.Disconnect()
|
peer: Refactor peer code into its own package.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
2015-10-02 08:03:20 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
func init() {
|
|
|
|
// Allow self connection when running the tests.
|
|
|
|
peer.TstAllowSelfConns()
|
|
|
|
}
|