This commit, along with recent commits to btcnet and btcwire, expose a new
network that is intended to provide a private network useful for
simulation testing. To that end, it has the special property that it has
no DNS seeds and will actively ignore all addr and getaddr messages. It
will also not try to connect to any nodes other than those specified via
--connect. This allows the network to remain private to the specific
nodes involved in the testing and not simply become another public
testnet.
The network difficulty is also set extremely low like the regression test
network so blocks can be created extremely quickly without requiring a lot
of hashing power.
In practise the races caused by not protecting these quite simply didn't
matter, they couldn't actually cause any damage whatsoever. However, I
am sick of hearing about these essentially false positivies whenever
someone runs the race detector (yes, i know that race detector has no
false positives but this was effectively harmess).
verified to shut the detector up by dhill.
On unknown inventory types, handleGetDataMsg would loop forever.
After fixing that, if a getdata request only had unknown inventory
types, it would block forever.
ok @davecgh
This commit modifies peers to use a max protocol version that is specified
as a constant in the peer code as opposed to the btcwire.ProtocolVersion
constant.
This allows btcwire to be updated to support new protocol versions without
causing peers to claim they support a protocol version which they actually
don't.
This commit changes the server byte counters over to use a mutex instead
of the atomic package. The atomic.AddUint64 function requires the struct
fields to be 64-bit aligned on 32-bit platforms. The byte counts are
fields in the server struct and are not 64-bit aligned. While it would be
possible to arrange the fields to be aligned through various means, it
would make the code too fragile for my tastes. I prefer code that doesn't
depend on platform specific alignment.
Fixes#96.
Previously the getnettotals was just looping through all of the currently
connected peers to sum the byte counts and returning that. However, the
intention of the getnettotals RPC is to get all bytes since the server was
started, so this logic was not correct.
This commit modifies the code to keep an atomic counter on the server for
bytes read/written and has each peer update the server counters as well as
the per-peer counters.
This commit adds byte counters to each peer using the new btcwire
ReadMessageN and WriteMessageN functions to obtain the number of bytes
read and written, respectively. It also returns those byte counters via
the PeerInfo struct which is used to populate the RPC getpeerinfo reply.
Closes#83.
This commit improves how the headers-first mode works in several ways.
The previous headers-first code was an initial implementation that did not
have all of the bells and whistles and a few less than ideal
characteristics. This commit improves the heaers-first code to resolve
the issues discussed next.
- The previous code only used headers-first mode when starting out from
block height 0 rather than allowing it to work starting at any height
before the final checkpoint. This means if you stopped the chain
download at any point before the final checkpoint and restarted, it
would not resume and you therefore would not have the benefit of the
faster processing offered by headers-first mode.
- Previously all headers (even those after the final checkpoint) were
downloaded and only the final checkpoint was verified. This resulted in
the following issues:
- As the block chain grew, increasingly larger numbers of headers were
downloaded and kept in memory
- If the node the node serving up the headers was serving an invalid
chain, it wouldn't be detected until downloading a large number of
headers
- When an invalid checkpoint was detected, no action was taken to
recover which meant the chain download would essentially be stalled
- The headers were kept in memory even though they didn't need to be as
merely keeping track of the hashes and heights is enough to provde they
properly link together and checkpoints match
- There was no logging when headers were being downloaded so it could
appear like nothing was happening
- Duplicate requests for the same headers weren't being filtered which
meant is was possible to inadvertently download the same headers twice
only to throw them away.
This commit resolves these issues with the following changes:
- The current height is now examined at startup and prior each sync peer
selection to allow it to resume headers-first mode starting from the
known height to the next checkpoint
- All checkpoints are now verified and the headers are only downloaded
from the current known block height up to the next checkpoint. This has
several desirable properties:
- The amount of memory required is bounded by the maximum distance
between to checkpoints rather than the entire length of the chain
- A node serving up an invalid chain is detected very quickly and with
little work
- When an invalid checkpoint is detected, the headers are simply
discarded and the peer is disconnected for serving an invalid chain
- When the sync peer disconnets, all current headers are thrown away
and, due to the new aforementioned resume code, when a new sync peer
is selected, headers-first mode will continue from the last known good
block
- In addition to reduced memory usage from only keeping information about
headers between two checkpoints, the only information now kept in memory
about the headers is the hash and height rather than the entire header
- There is now logging information about what is happening with headers
- Duplicate header requests are now filtered
This commit switches the handleGetHeadersMsg function to make use of the
new FetchBlockHeightBySha and FetchBlockHeaderBySha functions in btcdb.
Also, while here, nuke the header copy which is no longer required due to
the recent btcwire changes.
This commit reduces the initial idle timeout before version negotiation
has happened on a new peer to 30 seconds. Previously it could take 5
minutes due to the general idle timeout.
This commit changes a couple of sections which deal with large lists of
inventory vectors to use the new size hint functions recently added to
btcwire. This allows a bit more efficiency since the size of the list is
known up front and we can therefore avoid dynamically growing the backing
array several times. This also helps avoid a Go bug that leaks memory on
appends and GC churn.
This implements --onion (and --onionuser/--onionpass) that enable a
different proxy to be used to connect to .onion addresses. If no main
proxy is supplied then no proxy will be used for non-onion addresses.
Additionally we add --noonion that blocks connection attempts to .onion
addresses entirely (and avoids using tor for proxy dns lookups).
the --tor option has been supersceded and thus removed.
Closes#47
This commit does some housekeeping on peer.go to make the code more
consistent, correct a few comments, and add new comments to explain the
peer data flow. A couple of examples are variables not using the standard
Go style (camelCase) and comments that don't match the style of other
comments.
Instead of one thread that queues and writes, we move to a two queue
model. The queueHandler muxes all the sources of outgoung packets and
drips them to the actual sender. This is done so that a large send
doesnt' allow the channels to fillup and cause blockmanager and server
to block, which delays other peers.
Most messages we handle as is. However, for getdata we do some manual
limiting and pipelining, we queue up three and then we load the next
into memory, not sending it until the otherp ackets have been sent. We
may want to change this later to queue the packet *then* wait so that we
don't completely drain the pipe.
A few misc tweaks to avoid deadlocking by ensuring the all channels will
always drain. mostly this relates to ensuring that we know no more data
will be coming before we drain the channel, and not queueing after we
are marked to disconnect.
Discussed heavily with drahn@ and davec@.
It is not necessary to do all of the transaction validation on
blocks if they have been confirmed to be in the block chain leading
up to the final checkpoint in a given blockschain.
This algorithm fetches block headers from the peer, then once it has
established the full blockchain connection, it requests blocks.
Any blocks before the final checkpoint pass true for fastAdd on
btcchain operation, which causes it to do less valiation on the block.
The you address is the one we already set up fo the user, so either waht
we connected to (this will work with tor, etc), or the ip the user
connect to us from otherwise. We must however check to see if it is the address
of the proxy and strip it.
The me addesss, we use the same address selection for local addresses as
always
This should mean that we pass our tor address out in the version message
and thus the peers should add us to their addressmanager.
This implements only the bare bones of external ip address selection
using very similar algorithms and selection methods to bitcoind. Every
address we bind to, and if we bind to the wildcard, every listening
address is recorded, and one for the appropriate address type of the
peer is selected.
Support for fetching addresses via upnp, external services, or via the
command line are not yet implemented.
Closes#35
Perform the requisite processing on .onion addresses to turn them into the tor
reserved ipv6 region (the same as bitcoind and onioncat). Furthermore,
when printing an ip address, reverse the conversion so we print it
nicely. base32 as standard is uppercase, but tor and bitcoind seem to
use lowercase so we first must for we force .onion addrs to uppercase
(and to lowercase on the reverse).
As a side effect we now should handle dns names on the command line (via tor if
required) and add them to the addressmanger as necessary.
The code to send an address messages in batches was previously clearing
all addresses from the existing message after queueing it to be sent.
Since the message is a pointer, this means it was removing the addresses
from the same message which might not have already been sent yet (from
another goroutine) which led to a race.
This commit modifies the code to create a new address message for each
batch as intended.
Fixes#58.
Also, make every subsystem within btcd use its own logger instance so each
subsystem can have its own level specified independent of the others.
This is work towards #48.
Outbound we already have the exact same thing set up, and this should
quieten the race detector. Please note that this does *not* cause
problems with the service flags being wrong. Since by this point we have
already done every thing that would use the service flags from p.na in
addrmanager, and now p.Services is correct..
- Lock the mempool when removing transactions during a notification as
intended
- When generating the inventory vectors to serve on a mempool request,
recheck the memory pool for each hash since it's possible another thread
could have removed an entry after the initial query for available
hashes
- When a block is connected, remove any transactions which are now double
spends as a result of the newly connected transactions
We have a channel for queries and commands in server, where we pass in
args and the channel to reply from, let rpcserver use these interfaces
to provide the requistie information.
So far not all of the informaation is 100% correct, the syncpeer
information needs to be fetched from blockmanager, the subversion isn't
recorded and the number of bytes sent and recieved needs to be obtained
from btcwire. The rest should be correct.
