The block index now tracks the set of dirty block nodes with status
changes that haven't been persisted and flushes the changes to the DB
at the appropriate times.
Currently only the blocks in the active chain are loaded into the
block index on initialization. This instead iterates over the entire
block index bucket in LevelDB and loads all nodes.
The bucket contains block headers keyed by the block height encoded as
big-endian concatenated with the block hash. This allows block headers
to be fetched from the DB in height order with a cursor.
These method allows safe concurrent access to reading and modifying
block node statuses. When block statuses get persisted in a later
change, the setter methods can be used to mark block nodes as dirty.
Each node in the block index records some flags about its validation
state. This is just stored in memory for now, but can save effort if
attempting to reconnect a block that failed validation or was
disconnected.
- Remove inMainChain from block nodes since that can now be efficiently
determined by using the chain view
- Track the best chain via a chain view instead of a single block node
- Use the tip of the best chain view everywhere bestNode was used
- Update chain view tip instead of updating best node
- Change reorg logic to use more efficient chain view fork finding logic
- Change block locator code over to use more efficient chain view logic
- Remove now unused block-index-based block locator code
- Move BlockLocator definition to chain.go
- Move BlockLocatorFromHash and LatestBlockLocator to chain.go
- Update both to use more efficient chain view logic
- Rework IsCheckpointCandidate to use block index and chain view
- Optimize MainChainHasBlock to use chain view instead of hitting db
- Move to chain.go since it no longer involves database I/O
- Removed error return since it can no longer fail
- Optimize BlockHeightByHash to use chain view instead of hitting db
- Move to chain.go since it no longer involves database I/O
- Removed error return since it can no longer fail
- Optimize BlockHashByHeight to use chain view instead of hitting db
- Move to chain.go since it no longer involves database I/O
- Removed error return since it can no longer fail
- Optimize HeightRange to use chain view instead of hitting db
- Move to chain.go since it no longer involves database I/O
- Optimize BlockByHeight to use chain view for main chain check
- Optimize BlockByHash to use chain view for main chain check
This completely removes the threshold state database caching code since
it can very quickly be calculated at startup now that the entire block
index is loaded first.
This reworks the block index code such that it loads all of the headers
in the main chain at startup and constructs the full block index
accordingly.
Since the full index from the current best tip all the way back to the
genesis block is now guaranteed to be in memory, this also removes all
code related to dynamically loading the nodes and updates some of the
logic to take advantage of the fact traversing the block index can
longer potentially fail. There are also more optimizations and
simplifications that can be made in the future as a result of this.
Due to removing all of the extra overhead of tracking the dynamic state,
and ensuring the block node structs are aligned to eliminate extra
padding, the end result of a fully populated block index now takes quite
a bit less memory than the previous dynamically loaded version.
The main downside is that it now takes a while to start whereas it was
nearly instant before, however, it is much better to provide more
efficient runtime operation since that is its ultimate purpose and the
benefits far outweigh this downside.
Some benefits are:
- Since every block node is in memory, the recent code which
reconstructs headers from block nodes means that all headers can
always be served from memory which is important since the majority of
the network has moved to header-based semantics
- Several of the error paths can be removed since they are no longer
necessary
- It is no longer expensive to calculate CSV sequence locks or median
times of blocks way in the past
- It will be possible to create much more efficient iteration and
simplified views of the overall index
- The entire threshold state database cache can be removed since it is
cheap to construct it from the full block index as needed
An overview of the logic changes are as follows:
- Move AncestorNode from blockIndex to blockNode and greatly simplify
since it no longer has to deal with the possibility of dynamically
loading nodes and related failures
- Rename RelativeNode to RelativeAncestor, move to blockNode, and
redefine in terms of AncestorNode
- Move CalcPastMedianTime from blockIndex to blockNode and remove no
longer necessary test for nil
- Change calcSequenceLock to use Ancestor instead of RelativeAncestor
since it reads more clearly
This commit implements the new block validation rules as defined by
BIP0141. The new rules include the constraints that if a block has
transactions with witness data, then there MUST be a commitment within
the conies transaction to the root of a new merkle tree which commits
to the wtxid of all transactions. Additionally, rather than limiting
the size of a block by size in bytes, blocks are now limited by their
total weight unit. Similarly, a newly define “sig op cost” is now used
to limit the signature validation cost of transactions found within
blocks.
This corrects the assertion in the decodeSpentTxOut function so it does
not improperly cause a panic when unwinding transactions during a reorg
under certain circumstances. In particular, the provided transaction
version that is passed when a stxo entry does not exist is now -1 in
order to properly distinguish it from the zero value.
It also updates the tests accordingly.
This was discovered by the reorg on testnet from block
00000000000018c58c2d2816f03dac327d975a18af6edf1a369df67ecddaf816 to
0000000000001c1161a367156465cc6226e9f862d9c585f94db5779fdf5455ff.
This modifies the blockNode and BestState structs in the blockchain
package to store hashes directly instead of pointers to them and updates
callers to deal with the API change in the exported BestState struct.
In general, the preferred approach for hashes moving forward is to store
hash values in complex data structures, particularly those that will be
used for cache entries, and accept pointers to hashes in arguments to
functions.
Some of the reasoning behind making this change is:
- It is generally preferred to avoid storing pointers to data in cache
objects since doing so can easily lead to storing interior pointers
into other structs that then can't be GC'd
- Keeping the hash values directly in the block node provides better
cache locality
This refactors the block index logic into a separate struct and
introduces an individual lock for it so it can be queried independent of
the chain lock.
This modifies the block nodes used in the blockchain package for keeping
track of the block index to use int64 for the timestamps instead of
time.Time.
This is being done because a time.Time takes 24 bytes while an int64
only takes 8 and the plan is to eventually move the entire block index
into memory instead of the current dynamically-loaded version, so
cutting the number of bytes used for the timestamp by a third is highly
desirable.
Also, the consensus code requires working with unix-style timestamps
anyways, so switching over to them in the block node does not seem
unreasonable.
Finally, this does not go so far as to change all of the time.Time
references, particularly those that are in the public API, so it is
purely an internal change.
The thresholdState and deploymentState functions expect the block node
for the block prior to which the threshold state is calculated, however
the startup code which checked the threshold states was using the
current best node instead of its parent.
While here, also update the comments and rename a couple of variables to
help make this fact more clear.
This commit adds all of the infrastructure needed to support BIP0009
soft forks.
The following is an overview of the changes:
- Add new configuration options to the chaincfg package which allows the
rule deployments to be defined per chain
- Implement code to calculate the threshold state as required by BIP0009
- Use threshold state caches that are stored to the database in order
to accelerate startup time
- Remove caches that are invalid due to definition changes in the
params including additions, deletions, and changes to existing
entries
- Detect and warn when a new unknown rule is about to activate or has
been activated in the block connection code
- Detect and warn when 50% of the last 100 blocks have unexpected
versions.
- Remove the latest block version from wire since it no longer applies
- Add a version parameter to the wire.NewBlockHeader function since the
default is no longer available
- Update the miner block template generation code to use the calculated
block version based on the currently defined rule deployments and
their threshold states as of the previous block
- Add tests for new error type
- Add tests for threshold state cache
This adds a new field to the best chain state snapshot for the
calculated past median time as returned by the calcPastMedianTime
function. This is useful since it provides fast access to it without
having to acquire the chain lock which is needed to recalculate it.
This will ultimately allow the associated exported function to be
removed since it only exists to be able to calculate this exact value,
however this commit only introduces the new field in order to keep the
changes minimal.
This is mostly a backport of some of the same modifications made in
Decred along with a few additional things cleaned up. In particular,
this updates the code to make use of the new chainhash package.
Also, since this required API changes anyways and the hash algorithm is
no longer tied specifically to SHA, all other functions throughout the
code base which had "Sha" in their name have been changed to Hash so
they are not incorrectly implying the hash algorithm.
The following is an overview of the changes:
- Remove the wire.ShaHash type
- Update all references to wire.ShaHash to the new chainhash.Hash type
- Rename the following functions and update all references:
- wire.BlockHeader.BlockSha -> BlockHash
- wire.MsgBlock.BlockSha -> BlockHash
- wire.MsgBlock.TxShas -> TxHashes
- wire.MsgTx.TxSha -> TxHash
- blockchain.ShaHashToBig -> HashToBig
- peer.ShaFunc -> peer.HashFunc
- Rename all variables that included sha in their name to include hash
instead
- Update for function name changes in other dependent packages such as
btcutil
- Update copyright dates on all modified files
- Update glide.lock file to use the required version of btcutil
This removes the root field and all references to it from the BlockChain
since it is no longer required.
It was previously required because the chain state was not initialized
when the instance was created. However, that is no longer the case, so
there is no reason to keep it around any longer.
The current code is needlessly checking the number of bytes needed to
serialize the unspentness bitmap in the utxo against a maximum value
that could never be returned because the function takes a uint32 output
index which is treated as a bit offset, and converts it bytes, which
will necessarily be less than a max uint32.
This check also causes a compile error on arm where native integers are
32 bits.
This simply removes the unneeded check.
This introduces a new indexing infrastructure for supporting optional
indexes using the new database and blockchain infrastructure along with
two concrete indexer implementations which provide both a
transaction-by-hash and a transaction-by-address index.
The new infrastructure is mostly separated into a package named indexers
which is housed under the blockchain package. In order to support this,
a new interface named IndexManager has been introduced in the blockchain
package which provides methods to be notified when the chain has been
initialized and when blocks are connected and disconnected from the main
chain. A concrete implementation of an index manager is provided by the
new indexers package.
The new indexers package also provides a new interface named Indexer
which allows the index manager to manage concrete index implementations
which conform to the interface.
The following is high level overview of the main index infrastructure
changes:
- Define a new IndexManager interface in the blockchain package and
modify the package to make use of the interface when specified
- Create a new indexers package
- Provides an Index interface which allows concrete indexes to plugin
to an index manager
- Provides a concrete IndexManager implementation
- Handles the lifecycle of all indexes it manages
- Tracks the index tips
- Handles catching up disabled indexes that have been reenabled
- Handles reorgs while the index was disabled
- Invokes the appropriate methods for all managed indexes to allow
them to index and deindex the blocks and transactions
- Implement a transaction-by-hash index
- Makes use of internal block IDs to save a significant amount of
space and indexing costs over the old transaction index format
- Implement a transaction-by-address index
- Makes use of a leveling scheme in order to provide a good tradeoff
between space required and indexing costs
- Supports enabling and disabling indexes at will
- Support the ability to drop indexes if they are no longer desired
The following is an overview of the btcd changes:
- Add a new index logging subsystem
- Add new options --txindex and --addrindex in order to enable the
optional indexes
- NOTE: The transaction index will automatically be enabled when the
address index is enabled because it depends on it
- Add new options --droptxindex and --dropaddrindex to allow the indexes
to be removed
- NOTE: The address index will also be removed when the transaction
index is dropped because it depends on it
- Update getrawtransactions RPC to make use of the transaction index
- Reimplement the searchrawtransaction RPC that makes use of the address
index
- Update sample-btcd.conf to include sample usage for the new optional
index flags
This commit is the first stage of several that are planned to convert
the blockchain package into a concurrent safe package that will
ultimately allow support for multi-peer download and concurrent chain
processing. The goal is to update btcd proper after each step so it can
take advantage of the enhancements as they are developed.
In addition to the aforementioned benefit, this staged approach has been
chosen since it is absolutely critical to maintain consensus.
Separating the changes into several stages makes it easier for reviewers
to logically follow what is happening and therefore helps prevent
consensus bugs. Naturally there are significant automated tests to help
prevent consensus issues as well.
The main focus of this stage is to convert the blockchain package to use
the new database interface and implement the chain-related functionality
which it no longer handles. It also aims to improve efficiency in
various areas by making use of the new database and chain capabilities.
The following is an overview of the chain changes:
- Update to use the new database interface
- Add chain-related functionality that the old database used to handle
- Main chain structure and state
- Transaction spend tracking
- Implement a new pruned unspent transaction output (utxo) set
- Provides efficient direct access to the unspent transaction outputs
- Uses a domain specific compression algorithm that understands the
standard transaction scripts in order to significantly compress them
- Removes reliance on the transaction index and paves the way toward
eventually enabling block pruning
- Modify the New function to accept a Config struct instead of
inidividual parameters
- Replace the old TxStore type with a new UtxoViewpoint type that makes
use of the new pruned utxo set
- Convert code to treat the new UtxoViewpoint as a rolling view that is
used between connects and disconnects to improve efficiency
- Make best chain state always set when the chain instance is created
- Remove now unnecessary logic for dealing with unset best state
- Make all exported functions concurrent safe
- Currently using a single chain state lock as it provides a straight
forward and easy to review path forward however this can be improved
with more fine grained locking
- Optimize various cases where full blocks were being loaded when only
the header is needed to help reduce the I/O load
- Add the ability for callers to get a snapshot of the current best
chain stats in a concurrent safe fashion
- Does not block callers while new blocks are being processed
- Make error messages that reference transaction outputs consistently
use <transaction hash>:<output index>
- Introduce a new AssertError type an convert internal consistency
checks to use it
- Update tests and examples to reflect the changes
- Add a full suite of tests to ensure correct functionality of the new
code
The following is an overview of the btcd changes:
- Update to use the new database and chain interfaces
- Temporarily remove all code related to the transaction index
- Temporarily remove all code related to the address index
- Convert all code that uses transaction stores to use the new utxo
view
- Rework several calls that required the block manager for safe
concurrency to use the chain package directly now that it is
concurrent safe
- Change all calls to obtain the best hash to use the new best state
snapshot capability from the chain package
- Remove workaround for limits on fetching height ranges since the new
database interface no longer imposes them
- Correct the gettxout RPC handler to return the best chain hash as
opposed the hash the txout was found in
- Optimize various RPC handlers:
- Change several of the RPC handlers to use the new chain snapshot
capability to avoid needlessly loading data
- Update several handlers to use new functionality to avoid accessing
the block manager so they are able to return the data without
blocking when the server is busy processing blocks
- Update non-verbose getblock to avoid deserialization and
serialization overhead
- Update getblockheader to request the block height directly from
chain and only load the header
- Update getdifficulty to use the new cached data from chain
- Update getmininginfo to use the new cached data from chain
- Update non-verbose getrawtransaction to avoid deserialization and
serialization overhead
- Update gettxout to use the new utxo store versus loading
full transactions using the transaction index
The following is an overview of the utility changes:
- Update addblock to use the new database and chain interfaces
- Update findcheckpoint to use the new database and chain interfaces
- Remove the dropafter utility which is no longer supported
NOTE: The transaction index and address index will be reimplemented in
another commit.
