This allows a caller-provided tag to be associated with orphan
transactions. This is useful since the caller can use the tag for
purposes such as keeping track of which peers orphans were first seen
from.
Also, since a parameter is required now anyways, it associates the peer
ID with processed transactions from remote peers.
This move the export for MinHighPriority from the mempool package to the
mining package. This should have been done when the priority
calculation code was moved to the mining package.
This commit adds a new option to the mempool’s policy configuration
which determines which transaction versions should be accepted as
standard.
The default version set by the policy within the server is 2; this
allows accepting transactions which have version 2 enabled in order to
utilize the new sequence locks feature.
This moves the priority-related code from the mempool package to the
mining package and also exports a new constant named UnminedHeight which
takes the place of the old unexported mempoolHeight.
Even though the mempool makes use of the priority code to make decisions
about what it will accept, priority really has to do with mining since
it influences which transactions will end up into a block. This change
also has the side effect of being a step towards enabling separation of
the mining code into its own package which, as previously mentioned,
needs access to the priority calculation code as well.
Finally, the mempoolHeight variable was poorly named since what it
really represents is a transaction that has not been mined into a block
yet. Renaming the variable to more accurately reflect its purpose makes
it clear that it belongs in the mining package which also needs the
definition now as well since the priority calculation code relies on it.
This will also benefit an outstanding PR which needs access to the same
value.
This implements orphan expiration in the mempool such that any orphans
that have not had their ancestors materialize within 15 minutes of their
initial arrival time will be evicted which in turn will remove any other
orphans that attempted to redeem it.
In order to perform the evictions with reasonable efficiency, an
opportunistic scan interval of 5 minutes is used. That is to say that
there is not a hard deadline on the scan interval and instead it runs
when a new orphan is added to the pool if enough time has passed.
The following is an example of running this code against the main
network for around 30 minutes:
23:05:34 2016-10-24 [DBG] TXMP: Expired 3 orphans (remaining: 254)
23:10:38 2016-10-24 [DBG] TXMP: Expired 112 orphans (remaining: 231)
23:15:43 2016-10-24 [DBG] TXMP: Expired 95 orphans (remaining: 206)
23:20:44 2016-10-24 [DBG] TXMP: Expired 90 orphans (remaining: 191)
23:25:51 2016-10-24 [DBG] TXMP: Expired 71 orphans (remaining: 191)
23:30:55 2016-10-24 [DBG] TXMP: Expired 70 orphans (remaining: 105)
23:36:19 2016-10-24 [DBG] TXMP: Expired 55 orphans (remaining: 107)
As can be seen from the above, without orphan expiration on this data
set, the orphan pool would have grown an additional 496 entries.
This modifies the way orphan removal and processing is done to more
aggressively remove orphans that can no longer be valid due to other
transactions being added or removed from the primary transaction pool.
The net effect of these changes is that orphan pool will typically be
much smaller which greatly improves its effectiveness. Previously, it
would typically quickly reach the max allowed worst-case usage and
effectively stay there forever.
The following is a summary of the changes:
- Modify the map that tracks which orphans redeem a given transaction to
instead track by the specific outpoints that are redeemed
- Modify the various orphan removal and processing functions to accept
the full transaction rather than just its hash
- Introduce a new flag on removeOrphans which specifies whether or not
to remove the transactions that redeem the orphan being removed as
well which is necessary since only some paths require it
- Add a new function named removeOrphanDoubleSpends that is invoked
whenever a transaction is added to the main pool and thus the outputs
they spent become concrete spends
- Introduce a new flag on maybeAcceptTransaction which specifies whether
or not duplicate orphans should be rejected since only some paths
require it
- Modify processOrphans as follows:
- Make use of the modified map
- Use newly available flags and logic work more strictly work with tx
chains
- Recursively remove any orphans that also redeem any outputs redeemed
by the accepted transactions
- Several new tests to ensure proper functionality
- Removing an orphan that doesn't exist is removed both when there is
another orphan that redeems it and when there is not
- Removing orphans works properly with orphan chains per the new
remove redeemers flag
- Removal of multi-input orphans that double spend an output when a
concrete redeemer enters the transaction pool
This optimizes the way in which the mempool oprhan map is limited in the
same way the server block manager maps were previously optimized.
Previously the code would read a cryptographically random value large
enough to construct a hash, find the first entry larger than that value,
and evict it.
That approach is quite inefficient and could easily become a
bottleneck when processing transactions due to the need to read from a
source such as /dev/urandom and all of the subsequent hash comparisons.
Luckily, strong cryptographic randomness is not needed here. The primary
intent of limiting the maps is to control memory usage with a secondary
concern of making it difficult for adversaries to force eviction of
specific entries.
Consequently, this changes the code to make use of the pseudorandom
iteration order of Go's maps along with the preimage resistance of the
hashing function to provide the desired functionality. It has
previously been discussed that the specific pseudorandom iteration order
is not guaranteed by the Go spec even though in practice that is how it
is implemented. This is not a concern however because even if the
specific compiler doesn't implement that, the preimage resistance of the
hashing function alone is enough.
The following is a before and after comparison of the function for both
speed and memory allocations:
benchmark old ns/op new ns/op delta
----------------------------------------------------------------
BenchmarkLimitNumOrphans 3727 243 -93.48%
benchmark old allocs new allocs delta
-----------------------------------------------------------------
BenchmarkLimitNumOrphans 4 0 -100.00%
This renames the mempool.Config.RelayNonStd option to AcceptNonStd which
more accurately describes its behavior since the mempool was refactored
into a separate package.
The reasoning for this change is that the mempool is not responsible for
relaying transactions (nor should it be). Its job is to maintain a pool
of unmined transactions that are validated according to consensus and
policy configuration options which are then used to provide a source of
transactions that need to be mined.
Instead, it is the server that is responsible for relaying transactions.
While it is true that the current server code currently only relays txns
that were accepted to the mempool, this does not necessarily have to
be the case. It would be entirely possible (and perhaps even a good
idea as something do in the future), to separate the relay policy from
the mempool acceptance policy (and thus indirectly the mining policy).
This coincides with the mempool only, policy change which enforces
transaction finality according to the median-time-past rather than
blockheader timestamps. The behavior is pre-cursor to full blown BIP
113 consensus deployment, and subsequent activation.
As a result, the TimeSource field in the mempoolConfig is no longer
needed so it has been removed. Additionally, checkTransactionStandard has been
modified to instead take a time.Time as the mempool is no longer explicitly
dependant on a Chain instance.
This commit adds an additional closure function to the mempool’s config
which computes the median time past from the point of view of the best
node in the chain. The mempool test harness has also been updated to allow
setting a mock median time past for testing purposes.
In addition to increasing the testability of the mempool, this commit
should also speed up transaction and block validation for BIP 113 as
the MTP no longer needs to be re-calculated each time from scratch.
This modifies the config for the new mempool package such that it takes
a callback function to obtain the best chain height instead of requiring
a fully initialized blockchain.BlockChain instance.
This will make it much easier to test the mempool since the tests will
be able to provide their own height function to test various
functionality without having create and manipulate full blocks and chain
instances.
This does the minimum work necessary to refactor the mempool code into
its own package. The idea is that separating this code into its own
package will greatly improve its testability, allow independent
benchmarking and profiling, and open up some interesting opportunities
for future development related to the memory pool.
There are likely some areas related to policy that could be further
refactored, however it is better to do that in future commits in order
to keep the changeset as small as possible during this refactor.
Overview of the major changes:
- Create the new package
- Move several files into the new package:
- mempool.go -> mempool/mempool.go
- mempoolerror.go -> mempool/error.go
- policy.go -> mempool/policy.go
- policy_test.go -> mempool/policy_test.go
- Update mempool logging to use the new mempool package logger
- Rename mempoolPolicy to Policy (so it's now mempool.Policy)
- Rename mempoolConfig to Config (so it's now mempool.Config)
- Rename mempoolTxDesc to TxDesc (so it's now mempool.TxDesc)
- Rename txMemPool to TxPool (so it's now mempool.TxPool)
- Move defaultBlockPrioritySize to the new package and export it
- Export DefaultMinRelayTxFee from the mempool package
- Export the CalcPriority function from the mempool package
- Introduce a new RawMempoolVerbose function on the TxPool and update
the RPC server to use it
- Update all references to the mempool to use the package.
- Add a skeleton README.md
