This does three things:
- Splits the priority calculation logic from the TxDesc type
- Modifies the calcPriority function to perform the value age
calculation instead of accepting it as a parameter
- Changes the starting priority to be calculated when the transaction is
added to the pool
The first is useful as it is a step towards decoupling the mining code
from the internals of the memory pool. Also, the concept of priority is
related to mining policy, so it makes more sense to have the
calculations separate than being defined on the memory pool tx
descriptor.
The second change has been made because everywhere that uses the
calcPriority function first has to calculate the value age anyways and
by making it part of the function it can be avoided altogether in
certain circumstances thereby provided a bit of optimization.
The third change ensure the starting priority is safe for reentrancy
which will be important once the mempool is split into a separate
package.
This introduces the concept of a mining policy struct which is used to
control block template generation instead of directly accessing the
config struct. This is a step toward decoupling the mining code from
the internals of btcd. Ultimately the intent is to create a separate
mining package.
rpcserver:
If the locktime is given, the transaction inputs will be set to a
non-max value, activating the locktime. The locktime for the
new transaction will be set to the given value.
This mimics Bitcoin Core commit 212bcca92089f406d9313dbe6d0e1d25143d61ff
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
Also, update TravisCI goclean script to remove the special casing which
ignored 'Id' from the lint output since that exception is no longer
needed. It was previously required due to the old version of btcjson,
but that is no longer in the repo.
Introduce an ECDSA signature verification into btcd in order to
mitigate a certain DoS attack and as a performance optimization.
The benefits of SigCache are two fold. Firstly, usage of SigCache
mitigates a DoS attack wherein an attacker causes a victim's client to
hang due to worst-case behavior triggered while processing attacker
crafted invalid transactions. A detailed description of the mitigated
DoS attack can be found here: https://bitslog.wordpress.com/2013/01/23/fixed-bitcoin-vulnerability-explanation-why-the-signature-cache-is-a-dos-protection/
Secondly, usage of the SigCache introduces a signature verification
optimization which speeds up the validation of transactions within a
block, if they've already been seen and verified within the mempool.
The server itself manages the sigCache instance. The blockManager and
txMempool respectively now receive pointers to the created sigCache
instance. All read (sig triplet existence) operations on the sigCache
will not block unless a separate goroutine is adding an entry (writing)
to the sigCache. GetBlockTemplate generation now also utilizes the
sigCache in order to avoid unnecessarily double checking signatures
when generating a template after previously accepting a txn to the
mempool. Consequently, the CPU miner now also employs the same
optimization.
The maximum number of entries for the sigCache has been introduced as a
config parameter in order to allow users to configure the amount of
memory consumed by this new additional caching.
This commit optimizes the createVinList function which is used to
generate the JSON list of transaction inputs. It also makes it more
consistent with the createVinListPrevOut function.
In particular, it entails the following changes:
- Only do a single coinbase check and return right away instead of
checking multiple times inside the loop over the inputs
- Use a pointer for populating the details of each entry to avoid
multiple unnecessary array lookups and bounds checks
- Group all fields that populate the entry for better readability
This commit converts all block height references to int32 instead of
int64. The current target block production rate is 10 mins per block
which means it will take roughly 40,800 years to reach the maximum
height an int32 affords. Even if the target rate were lowered to one
block per minute, it would still take roughly another 4,080 years to
reach the maximum.
In the mean time, there is no reason to use a larger type which results
in higher memory and disk space usage. However, for now, in order to
avoid having to reserialize a bunch of database information, the heights
are still serialized to the database as 8-byte uint64s.
This is being mainly being done in preparation for further upcoming
infrastructure changes which will use the smaller and more efficient
4-byte serialization in the database as well.
This commit modifies the createTxRawResult code path along with callers
to work with block headers as opposed to btcutil.Blocks. This in turn
allows the code in handleGetRawTransaction and
handleSearchRawTransactions to perform a much cheaper block header load
as opposed to a full block load.
While here, also very slightly optimize the createVinList function to
avoid creating a util.Tx wrapper and to take advantage of the
btcutil.Amount type added after the function was originally written
Create GenerateCmd in btcjson v2. Update tests to check GenerateCmd.
Update chaincfg/params.go with a new bool in Params, GenerateSupported,
with true values in SimNetParams and RegressionNetParams and false in
the others.
Create new flag, discreteMining, in CPUMiner struct.
Add GenerateNBlocks function to cpuminer.go and handleGenerate
function to rpcserver.go.
Update documentation for the RPC calls.
* The cases for the 'addnode' command were previously
stacked on top the new cases for the 'node' command.
The intended behavior was to create a fall through and
handle both commands. However, trying to use this
syntax with a type switch caused the first case to be
ignored.
* addnode' specific functions and structs in the server
have been removed. Instead, the 'add' and 'del' subcommands
are now proxied to the matching 'node' cmd functions.
This commit removes the error returns from the BlockHeader.BlockSha,
MsgBlock.BlockSha, and MsgTx.TxSha functions since they can never fail and
end up causing a lot of unneeded error checking throughout the code base.
It also updates all call sites for the change.
* Gives node operators full control of peer connectivity
* RPC adds ability to disconnect all matching non-persistent peers,
remove persistent peers, and connect to peers making them either
temporary or persistent.
The limited user is specified with the --rpclimituser and
--rpclimitpass options (or the equivalent in the config file).
The config struct and loadConfig() are updated to take the
new options into account. The limited user can have neither
the same username nor the same password as the admin user.
The package-level rpcLimit map in rpcserver.go specifies
the RPC commands accessible by limited users. This map
includes both HTTP/S and websocket commands.
The checkAuth function gets a new return parameter to
signify whether the user is authorized to change server
state. The result is passed to the jsonRPCRead function and
to the WebsocketHandler function in rpcwebsocket.go.
The wsClient struct is updated with an "isAdmin" field
signifying that the client is authorized to change server
state, written by WebsocketHandler and handleMessage.
The handleMessage function also checks the field to
allow or disallow an RPC call.
The following documentation files are updated:
- doc.go
- sample-btcd.conf
- docs/README.md
- docs/json_rpc_api.md
- docs/configure_rpc_server_listen_interfaces.md
Fix#303 by changing the addrindex key prefix to 3 characters so that
it's easy to check length when dropping the index. To drop the old
index, check to make sure we aren't dropping any entries that end in
"sx" or "tx" as those aren't part of the addrindex. Update test to
deal with the new prefix length.
Fix#346 by changing the pointers in the mempool's addrindex map to
wire.ShaHash 32-byte values. This lets them be deleted even if the
transaction data changes places in memory upon expanding the maps.
Change the way addrindex uint32s are stored to big-endian in order to
sort the transactions on disk in chronological/dependency order.
Change the "searchrawtransactions" RPC call to return transactions
from the database before the memory pool so that they're returned in
order. This commit DOES NOT do topological sorting of the memory pool
transactions to ensure they're returned in dependency order. This may
be a good idea for a future enhancement.
Add addrindex versioning to automatically drop the old/incompatible
version of the index and rebuild with the new sort method and key
prefix.
When the fields in the command for the getnetworkhashps RPC don't have the
fields set, use the intended default values.
Since the btcjson package sets these fields to the default values when a
command is unmarshaled from the wire, this typically isn't necessary.
However, when the RPC server calls the handler internally with optional
command fields set to nil, as is the case in getmininginfo, the defaults
need to be set as well.
This commit updates the SearchRawTransactionsCmd verbose parameter in the
latest version of btcjson to an integer to match recent changes to the
previous version of btcjson.
This commit converts the RPC server over to use the new features available
in the latest version of btcjson and improve a few things along the way.
This following summarizes the changes:
- All btcjson imports have been updated to the latest package version
- The help has been significantly improved
- Invoking help with no command specified now provides an alphabetized
list of all supported commands along with one-line usage
- The help for each command is automatically generated and provides much
more explicit information such as the type of each parameter, whether
or not it's optional or required, etc
- The websocket-specific commands are now provided when accessing the
help when connected via websockets
- Help has been added for all websocket-specific commands and is only
accessible when connected via websockets
- The error returns and handling of both the standard and websocket
handlers has been made consistent
- All RPC errors have been converted to the new RPCError type
- Various variables have been renamed for consistency
- Several RPC errors have been improved
- The commands that are marked as unimplemented have been moved into the
separate map where they belong
- Several comments have been improved
- An unnecessary check has been removed from the createrawtransaction
handler
- The command parsing has been restructured a bit to pave the way for
JSON-RPC 2.0 batching support
- When invalid HTTP Basic Access Authentication details are provided to
the websocket endpoint, return a WWW-Authenticate header just like the
non-websocket endpoint
- When a connection to the websocket endpoint fails to properly upgrade,
return a 400 Bad Request HTTP error status code
This commit reorders the RPC server code to more closely match the
ordering used by the rest of the code base such that functions are
typically defined before they are used and near their call site.
* Address index is built up concurrently with the `--addrindex` flag.
* Entire index can be deleted with `--dropaddrindex`.
* New RPC call: `searchrawtransaction`
* Returns all transacitons related to a particular address
* Includes mempool transactions
* Requires `--addrindex` to be activated and fully caught up.
* New `blockLogger` struct has been added to factor our common logging
code
* Wiki and docs updated with new features.
* When an inv is to be sent to the server for relaying, the sender
already has access to the underlying data. So
instead of requiring the relay to look up the data by
hash, the data is now coupled in the request message.
This was previously hard-coded to zero instead of using the offset
provided by the median time source which takes time samples from the other
connected nodes.
This commit modifies the getblocktemplate RPC to correctly handle the
curtime field.
Currently, the RPC server will refuse to serve a block template if the
current time is before the minimum allowed time for a block even though
the real generated block template already accounted for it.
This consists of three changes:
- Remove the unnecessary and incorrect check in the RPC invocation for the
current time against the min required time since it is already handled
properly by the block template generation.
- Expose the network time source to the RPC work state and use the
adjusted time for checking against the maximum allowed time instead of
the current time.
- Set the returned RPC result curtime field to the time of the generated
block header.
Fixes#209.
This commit modifies the creation of RPC results to ignore errors in
script disassembly since they already contain the error string inline and
the RPC results must still be generated regardless.
This was already done in the decodescript RPC, however the same thing was
not being done in the higher level verbose transaction results. This
applies to both the createrawtransaction and decoderawtransaction RPCs.
Also, since this was the only thing that could error within those
functions, the error returns and caller checking of now non-existent
errors have been removed.
Fixes#210.
This commit introduces a new flag, --notls, which can be used to disable
TLS for the RPC server. However, the flag can only be used when the RPC
server is bound to localhost interfaces. This is intended to prevent the
situation where someone decides they want to expose the RPC server to the
web for remote management/access, but forgot they have TLS disabled.
This commit corrects the error check from the createTxRawResult call in
handleGetRawTransaction. It was previously given a different name which
resulted in the wrong error being checked.
Fixes#196.
This prevents a downgrade attack to the vulnerable SSLv3. While here,
go ahead and require at least TLS 1.2 since TLS 1.0 and 1.1 have their
own set of issues and it's only a matter of time before those would
need to be completely avoided as well.
ok @davecgh
This commit addresses a few nitpicks in the recent getrawmppol update
which populates the starting and current priority fields.
In particular:
- Move the new calcInputValueAge function before the function which
invokes it so it is consistent with the rest of the mempool code
- Double space after periods for consistency
- Correct the comments for calcInputValueAge to indiciate that inputs
which are in the the memory pool count as zero toward the value age
rather than the incorrect claim that that the overal input value age is
zero when one of them does
- Rename endingPriority to currentPriority to match the RPC field and its
actual function
- Make the comment about using zero when input transactions can't be found
for some reason more accurate since there can be (and frequently is)
more than one input transaction
This commit uses the new MedianTimeSource API in btcchain to create a
median time source which is stored in the server and is fed time samples
from all remote nodes that are connected. It also modifies all call sites
which now require the the time source to pass it in.
This change modifies the behavior of the gettxout RPC to match the
behavior of the reference client. If a transaction output is spent by
a mined transaction, the handler will now return nil (JSON null).
While here, avoid indexing some slices multiple times, by creating a
local variable instead.
This commit implements reject handling as defined by BIP0061 and bumps the
maximum supported protocol version to 70002 accordingly.
As a part of supporting this a new error type named RuleError has been
introduced which encapsulates and underlying error which could be one of
the existing TxRuleError or btcchain.RuleError types.
This allows a single high level type assertion to be used to determine if
the block or transaction was rejected due to a rule error or due to an
unexpected error. Meanwhile, an appropriate reject error can be created
from the error by pulling the underlying error out and using it.
Also, a check for minimum protocol version of 209 has been added.
Closes#133.
This commit implements a portion of the mutations section of BIP0023.
In particular, it adds the mutable, mintime, maxtime, and noncerange keys
to the returned block template along with indicating support for the time,
transactions/add, prevblock, and coinbase/append mutations. Also, the
addition of the mintime and maxtime fields imply support for the
time/decrement and time/increment mutations. Further, if the caller
indicates the coinbasevalue capability, the coinbasetxn field will be
omitted thereby implying support for the coinbase and generation
mutations.
Closes#124.
This commit implements the long polling portion of the getblocktemplate
RPC as defined by BIP0022. Per the specification, each block template is
returned with a longpollid which can be used in a subsequent
getblocktemplate request to keep the connection open until the server
determines the block template associated with the longpollid should be
replaced with a new one.
This is work towards #124.
This commit implements the non-optional and template tweaking support for
the getblocktemplate RPC as defined by BIP0022. This implementation does
not yet include long polling support.
This is work towards #124.
This commit has no effect on the effective functionality since Go
automatically deferences pointers, but there is no reason to have a
double indirection when returning the reply for getmininginfo.
This commits removes a number of golint warnings. There is a class of
warnings which I can't fix due to unsufficient knowledge of the domain
at this point. These are listed here:
addrmanager.go:907:1: comment on exported method AddrManager.Attempt
should be of the form "Attempt ..."
addrmanager.go:1048:1: exported function RFC1918 should have comment or
be unexported
addrmanager.go:1058:1: exported function RFC3849 should have comment or
be unexported
addrmanager.go:1065:1: exported function RFC3927 should have comment or
be unexported
addrmanager.go:1073:1: exported function RFC3964 should have comment or
be unexported
addrmanager.go:1081:1: exported function RFC4193 should have comment or
be unexported
addrmanager.go:1089:1: exported function RFC4380 should have comment or
be unexported
addrmanager.go:1097:1: exported function RFC4843 should have comment or
be unexported
addrmanager.go:1105:1: exported function RFC4862 should have comment or
be unexported
addrmanager.go:1113:1: exported function RFC6052 should have comment or
be unexported
addrmanager.go:1121:1: exported function RFC6145 should have comment or
be unexported
addrmanager.go:1128:1: exported function Tor should have comment or be
unexported
addrmanager.go:1143:1: exported function Local should have comment or be
unexported
addrmanager.go:1228:2: exported const InterfacePrio should have comment
(or a comment on this block) or be unexported
discovery.go:26:2: exported var ErrTorInvalidAddressResponse should have
comment or be unexported
limits/limits_unix.go:19:1: exported function SetLimits should have
comment or be unexported
limits/limits_windows.go:7:1: exported function SetLimits should have
comment or be unexported
util/dropafter/dropafter.go:22:6: exported type ShaHash should have
comment or be unexported
util/dropafter/dropafter.go:38:2: exported const ArgSha should have
comment (or a comment on this block) or be unexported
util/dropafter/dropafter.go:128:5: exported var ErrBadShaPrefix should
have comment or be unexported
util/dropafter/dropafter.go:129:5: exported var ErrBadShaLen should have
comment or be unexported
util/dropafter/dropafter.go:130:5: exported var ErrBadShaChar should
have comment or be unexported
util/showblock/showblock.go:24:6: exported type ShaHash should have
comment or be unexported
util/showblock/showblock.go:46:2: exported const ArgSha should have
comment (or a comment on this block) or be unexported
util/showblock/showblock.go:163:1: exported function DumpBlock should
have comment or be unexported
util/showblock/showblock.go:211:5: exported var ErrBadShaPrefix should
have comment or be unexported
util/showblock/showblock.go:212:5: exported var ErrBadShaLen should have
comment or be unexported
util/showblock/showblock.go:213:5: exported var ErrBadShaChar should
have comment or be unexported
The hex package requires an even number of characters in hex encoded
strings. Some of the handlers already prepended a zero if necessary to
make this condition true, however other did not. This commit extends this
functionality to all handlers and also makes the error return consistent.
ok @jrick
There are certain cases such as getblocktemplate which allow external
callers to be repsonsible for creating their own coinbase to replace the
generated one. By allowing the pay address to be nil in such cases, the
need to specify mining addresses via --miningaddr can be avoided thereby
leaving the payment address management up to the caller.
This commit modifies the RPC server such that all handlers now receive a
channel which will be notified when a client disconnects. This
notification can then be used to stop long-running operations early when a
client disconnects.
This capability was already present for websocket clients, but this commit
exposes it to standard HTTP clients as well.
Now that btcd support CPU mining, update the getgenerate, setgenerate,
gethashespersec, and getmininginfo RPC handlers to return the appropriate
information.
Also, remove the various extra help addenda about btcd not supporting
mining since it is no longer true.
This commit implements a built-in concurrent CPU miner that can be enabled
with the combination of the --generate and --miningaddr options. The
--blockminsize, --blockmaxsize, and --blockprioritysize configuration
options wich already existed prior to this commit control the block
template generation and hence affect blocks mined via the new CPU miner.
The following is a quick overview of the changes and design:
- Starting btcd with --generate and no addresses specified via
--miningaddr will give an error and exit immediately
- Makes use of multiple worker goroutines which independently create block
templates, solve them, and submit the solved blocks
- The default number of worker threads are based on the number of
processor cores in the system and can be dynamically changed at
run-time
- There is a separate speed monitor goroutine used to collate periodic
updates from the workers to calculate overall hashing speed
- The current mining state, number of workers, and hashes per second can
be queried
- Updated sample-btcd.conf file has been updated to include the coin
generation (mining) settings
- Updated doc.go for the new command line options
In addition the old --getworkkey option is now deprecated in favor of the
new --miningaddr option. This was changed for a few reasons:
- There is no reason to have a separate list of keys for getwork and CPU
mining
- getwork is deprecated and will be going away in the future so that means
the --getworkkey flag will also be going away
- Having the work 'key' in the option can be confused with wanting a
private key while --miningaddr make it a little more clear it is an
address that is required
Closes#137.
Reviewed by @jrick.
Also, since the new websoscket package allows the message type to be set
independently from the type of the variable, remove the casts between
strings and []byte in the websocket read/write paths. This avoids extra
copies thereby reducing the garbage generated.
Closes#134.
