This adds a benchmark for deserializing a large transaction that is
often referred to as the megatransaction since it is the largest Bitcoin
transaction mined to date. It consists of 5569 inputs and 1 output and
its hash is:
bb41a757f405890fb0f5856228e23b715702d714d59bf2b1feb70d8b2b4e3e08.
This is being done so there is a benchmark that tests more of a
worst-case scenario which is a better candidate for identifying and
testing improvements.
The following benchmark results shows the how much more intensive this
transaction is over the existing mock transaction:
DeserializeTxSmall 1000000 1751 ns/op 376 B/op 16 allocs/op
DeserializeTxLarge 300 5093980 ns/op 1672829 B/op 33430 allocs/op
This removes the root field and all references to it from the BlockChain
since it is no longer required.
It was previously required because the chain state was not initialized
when the instance was created. However, that is no longer the case, so
there is no reason to keep it around any longer.
This changes the script template parsing function to use a pointer into
the constant global opcode array for parsed opcodes as opposed to making
a copy of the opcode entries which causes unnecessary allocations.
Profiling showed that after roughly 48 hours of operation, this
copy was the culprit of 207 million unnecessary allocations.
This removes the logging functions that are now implemented in the peer
package as they are no longer used by btcd itself and should have been
removed when they were copied into the peer package.
It is not the responsibility of mempool to relay transactions, so
return a slice of transactions accepted to the mempool due to the
passed transaction to the caller.
This improves the tests of the priority queue to include the secondary
sort ordering as well as adds some manual entries to ensure the edge
conditions are properly tested.
This also brings the priority queue test coverage up to 100%.
having 3 int32s above the uint64s in the struct
will cause misalignment for some 32-bit architectures.
see https://golang.org/pkg/sync/atomic/#pkg-note-BUG
This aligns bytesReceived and bytesSent.
Profiles discovered that lookups into the signature cache included an
expensive comparison to the stored `sigInfo` struct. This lookup had the
potential to be more expensive than directly verifying the signature
itself!
In addition, evictions were rather expensive because they involved
reading from /dev/urandom, or equivalent, for each eviction once the
signature cache was full as well as potentially iterating over every
item in the cache in the worst-case.
To remedy this poor performance several changes have been made:
* Change the lookup key to the fixed sized 32-byte signature hash
* Perform a full equality check only if there is a cache hit which
results in a significant speed up for both insertions and existence
checks
* Override entries in the case of a colliding hash on insert Add an
* .IsEqual() method to the Signature and PublicKey types in the
btcec package to facilitate easy equivalence testing
* Allocate the signature cache map with the max number of entries in
order to avoid unnecessary map re-sizes/allocations
* Optimize evictions from the signature cache Delete the first entry
* seen which is safe from manipulation due to
the pre image resistance of the hash function
* Double the default maximum number of entries within the signature
cache due to the reduction in the size of a cache entry
* With this eviction scheme, removals are effectively O(1)
Fixes#575.
The current code is needlessly checking the number of bytes needed to
serialize the unspentness bitmap in the utxo against a maximum value
that could never be returned because the function takes a uint32 output
index which is treated as a bit offset, and converts it bytes, which
will necessarily be less than a max uint32.
This check also causes a compile error on arm where native integers are
32 bits.
This simply removes the unneeded check.
This adds a test to ensure the priority queue works properly both for
sorting by fee per KB and priorities.
Thanks to @ceejep for the original test code and idea which was
subsequently modified and cleaned up a bit to the code here.
This introduces a new indexing infrastructure for supporting optional
indexes using the new database and blockchain infrastructure along with
two concrete indexer implementations which provide both a
transaction-by-hash and a transaction-by-address index.
The new infrastructure is mostly separated into a package named indexers
which is housed under the blockchain package. In order to support this,
a new interface named IndexManager has been introduced in the blockchain
package which provides methods to be notified when the chain has been
initialized and when blocks are connected and disconnected from the main
chain. A concrete implementation of an index manager is provided by the
new indexers package.
The new indexers package also provides a new interface named Indexer
which allows the index manager to manage concrete index implementations
which conform to the interface.
The following is high level overview of the main index infrastructure
changes:
- Define a new IndexManager interface in the blockchain package and
modify the package to make use of the interface when specified
- Create a new indexers package
- Provides an Index interface which allows concrete indexes to plugin
to an index manager
- Provides a concrete IndexManager implementation
- Handles the lifecycle of all indexes it manages
- Tracks the index tips
- Handles catching up disabled indexes that have been reenabled
- Handles reorgs while the index was disabled
- Invokes the appropriate methods for all managed indexes to allow
them to index and deindex the blocks and transactions
- Implement a transaction-by-hash index
- Makes use of internal block IDs to save a significant amount of
space and indexing costs over the old transaction index format
- Implement a transaction-by-address index
- Makes use of a leveling scheme in order to provide a good tradeoff
between space required and indexing costs
- Supports enabling and disabling indexes at will
- Support the ability to drop indexes if they are no longer desired
The following is an overview of the btcd changes:
- Add a new index logging subsystem
- Add new options --txindex and --addrindex in order to enable the
optional indexes
- NOTE: The transaction index will automatically be enabled when the
address index is enabled because it depends on it
- Add new options --droptxindex and --dropaddrindex to allow the indexes
to be removed
- NOTE: The address index will also be removed when the transaction
index is dropped because it depends on it
- Update getrawtransactions RPC to make use of the transaction index
- Reimplement the searchrawtransaction RPC that makes use of the address
index
- Update sample-btcd.conf to include sample usage for the new optional
index flags
This commit is the first stage of several that are planned to convert
the blockchain package into a concurrent safe package that will
ultimately allow support for multi-peer download and concurrent chain
processing. The goal is to update btcd proper after each step so it can
take advantage of the enhancements as they are developed.
In addition to the aforementioned benefit, this staged approach has been
chosen since it is absolutely critical to maintain consensus.
Separating the changes into several stages makes it easier for reviewers
to logically follow what is happening and therefore helps prevent
consensus bugs. Naturally there are significant automated tests to help
prevent consensus issues as well.
The main focus of this stage is to convert the blockchain package to use
the new database interface and implement the chain-related functionality
which it no longer handles. It also aims to improve efficiency in
various areas by making use of the new database and chain capabilities.
The following is an overview of the chain changes:
- Update to use the new database interface
- Add chain-related functionality that the old database used to handle
- Main chain structure and state
- Transaction spend tracking
- Implement a new pruned unspent transaction output (utxo) set
- Provides efficient direct access to the unspent transaction outputs
- Uses a domain specific compression algorithm that understands the
standard transaction scripts in order to significantly compress them
- Removes reliance on the transaction index and paves the way toward
eventually enabling block pruning
- Modify the New function to accept a Config struct instead of
inidividual parameters
- Replace the old TxStore type with a new UtxoViewpoint type that makes
use of the new pruned utxo set
- Convert code to treat the new UtxoViewpoint as a rolling view that is
used between connects and disconnects to improve efficiency
- Make best chain state always set when the chain instance is created
- Remove now unnecessary logic for dealing with unset best state
- Make all exported functions concurrent safe
- Currently using a single chain state lock as it provides a straight
forward and easy to review path forward however this can be improved
with more fine grained locking
- Optimize various cases where full blocks were being loaded when only
the header is needed to help reduce the I/O load
- Add the ability for callers to get a snapshot of the current best
chain stats in a concurrent safe fashion
- Does not block callers while new blocks are being processed
- Make error messages that reference transaction outputs consistently
use <transaction hash>:<output index>
- Introduce a new AssertError type an convert internal consistency
checks to use it
- Update tests and examples to reflect the changes
- Add a full suite of tests to ensure correct functionality of the new
code
The following is an overview of the btcd changes:
- Update to use the new database and chain interfaces
- Temporarily remove all code related to the transaction index
- Temporarily remove all code related to the address index
- Convert all code that uses transaction stores to use the new utxo
view
- Rework several calls that required the block manager for safe
concurrency to use the chain package directly now that it is
concurrent safe
- Change all calls to obtain the best hash to use the new best state
snapshot capability from the chain package
- Remove workaround for limits on fetching height ranges since the new
database interface no longer imposes them
- Correct the gettxout RPC handler to return the best chain hash as
opposed the hash the txout was found in
- Optimize various RPC handlers:
- Change several of the RPC handlers to use the new chain snapshot
capability to avoid needlessly loading data
- Update several handlers to use new functionality to avoid accessing
the block manager so they are able to return the data without
blocking when the server is busy processing blocks
- Update non-verbose getblock to avoid deserialization and
serialization overhead
- Update getblockheader to request the block height directly from
chain and only load the header
- Update getdifficulty to use the new cached data from chain
- Update getmininginfo to use the new cached data from chain
- Update non-verbose getrawtransaction to avoid deserialization and
serialization overhead
- Update gettxout to use the new utxo store versus loading
full transactions using the transaction index
The following is an overview of the utility changes:
- Update addblock to use the new database and chain interfaces
- Update findcheckpoint to use the new database and chain interfaces
- Remove the dropafter utility which is no longer supported
NOTE: The transaction index and address index will be reimplemented in
another commit.
mempoolPolicy contains the values that configure the mempool policy.
This decouples the values from the internals of btcd to move closer
to a mempool package.
Putting the test code in the same package makes it easier for forks
since they don't have to change the import paths as much and it also
gets rid of the need for internal_test.go to bridge.
This same thing should probably be done for the majority of the code
base.
This modifies the chaincfg package to register the default network
params via the init function instead of manually hard coding their data
into the maps. This is less error prone when adding new default
networks.
A new function named mustRegister has been introduced that panics if
there are any errors when registering the network that the new code
makes use of and appropriate tests have been added.
This optimizes the way in which the maps are limited by the block
manager.
Previously the code would read a cryptographically random value large
enough to construct a hash, find the first entry larger than that value,
and evict it.
That approach is quite inefficient and could easily become a bottleneck
when processing transactions due to the need to read from a source such
as /dev/urandom and all of the subsequent hash comparisons.
Luckily, strong cryptographic randomness is not needed here. The primary
intent of limiting the maps is to control memory usage with a secondary
concern of making it difficult for adversaries to force eviction of
specific entries.
Consequently, this changes the code to make use of the pseudorandom
iteration order of Go's maps along with the preimage resistance of the
hashing function to provide the desired functionality. It has
previously been discussed that the specific pseudorandom iteration order
is not guaranteed by the Go spec even though in practice that is how it
is implemented. This is not a concern however because even if the
specific compiler doesn't implement that, the preimage resistance of the
hashing function alone is enough.
Thanks to @Roasbeef for pointing out the efficiency concerns and the
fact that strong cryptographic randomness is not necessary.
This simply exports and adds some comments to the fields of the
BlockTemplate struct.
This is primarily being done as a step toward being able to separate the
mining code into its own package, but also it makes sense on its own
because code that requests new block template necessarily examines the
returned fields which implies they should be exported.
This prevents the node from repeatedly requesting and rejecting the
same transaction as different peers inv the same transaction.
Idea from Bitcoin Core commit 0847d9cb5fcd2fdd5a21bde699944d966cf5add9
Also, limit the number of both requested blocks and transactions.
The --blocksonly configuration option disables accepting transactions
from remote peers. It will still accept, relay, and rebroadcast
valid transactions sent via RPC or websockets.
This updates the Go versions using when running the TravisCI integration
tests to reflect the latest supported Go versions.
Also, the vet tool moved into the Go source tree as of Go 1.5. Its previous
location in the x/tools repo was deprecated at that time and has now
been removed.
Finally, old tool path is no longer needed, so it has been removed.
The vet tool moved into the Go source tree as of Go 1.5. Its previous
location in the x/tools repo was deprecated at that time and has now
been removed.
This commit updates the .travis.yml configuration to avoid fetching vet
from the old location and to simply use the version now available as
part of the standard Go install.
Also, while here, remove the check for changing the tool path since it
is no longer needed.
This modifies the peer package to add support for the sendheaders
protocol message introduced by BIP0030.
NOTE: This does not add support to btcd itself. That requires the server
and sync code to make use of the new functionality exposed by these
changes. As a result, btcd will still be using protocol version 70011.
This ensures the channel passed to QueueMessage is writable and that
QueueMessage will not read from the channel (write-only).
This change is merely a safety change. If a user of the API passes
a read-only channel to QueueMessage, it will now be caught at compile
time instead of panicking during runtime.
Also update internal functions.
When the RPC server is not running a buffered transaction notification
channel fills and eventually blocks. This commit ensures that the
channel continues to be drained irrespective of the RPC server status.
Since the latest golint no longer works with on Go 1.4 and Go 1.4 is no
longer officially supported by btcsuite, remove it from the
configurations tested by TravisCI.
This commit updates the main README.md and docs/README.md files to
replace the references to the now dead btcgui project with the
Windows-only Paymetheus project.
While here, it also updates some information to make it more current and
accurately describe the current status.
The existing check to only log errors from websocket connections when
the error is not because the connection is being shutdown only detects
the single case where the remote client was shutdown.
This commit modifies that logic to include when the connection is being
forcibly shutdown via closing the quit channel and when it has been
shutdown from a client side close.
Now that Go 1.6 has been released, update the required Go version in the
README to 1.5 and add Go 1.6 to the configurations tested by TravisCI.
Also, while here, update the Go 1.4 and 1.5 versions tested by TravisCI
to the latest point releases.
This updates the findcheckpoint utility to work when there are not
already any checkpoints. This doesn't really matter for Bitcoin at the
current time, but if a new testnet is created it will not have any
checkpoints to start with and this change also means the utility can
work for alts.
While here, switch a couple of error prints to ensure they contain a
final newline.
This removes the intermediate transaction log that was introduced as a
part of the database cache as a workaround for leveldb batches causing
massive memory usage spikes in favor of the recently introduced leveldb
transaction interface which no longer has the memory usage issues.
This approach is preferred because it can avoid the extra memory needed
for the transaction log and therefore all of the intermediate states as
well. As a result, the default cache size has been doubled since it
equals roughly the same amount of overall memory usage and the flush
interval has been raised as well.
Dynamic ban scores consist of a persistent and a decaying component. The
persistent score can be used to create simple additive banning policies
simlar to those found in other bitcoin node implementations. The
decaying score enables the creation of evasive logic which handles
misbehaving peers (especially application layer DoS attacks) gracefully
by disconnecting and banning peers attempting various kinds of flooding.
Dynamic ban scores allow these two approaches to be used in tandem.
This pull request includes the following:
- Dynamic ban score type & functions, with tests for core functionality
- Ban score of connected peers can be queried via rpc (getpeerinfo)
- Example policy with decaying score increments on mempool and getdata
- Logging of misbehavior once half of the ban threshold is reached
- Banning logic can be disabled via configuration (enabled by default)
- User defined ban threshold can be set via configuration
This updates a couple of logging statements to use the serverPeer
instance instead of the embedded peer.Peer so they are consistent with
all of the other log statements.
This commit does not change functionality. It makes the creation of inbound and outbound peers more homogeneous. As a result the Start method of peer was removed as it was found not to be necessary. This is the first of several pull requests/commits designed to make the peer public API and internals less complex.
This implements the wire protocol encoding portion of a new
sendheaders message as described by BIP0130. It purpose is to request
that a peer sends header commands instead of inv commands when
announcing new blocks. This includes a protocol version bump to 70012
and a wire version bump to 0.4.0.
Note that this does not implement logic to handle the command in btcd,
rather it only makes the command available at the wire protocol level.
A future commit which honors the command and therefore provides full
BIP0130 support is still required.
This optimizes the filter address handling code in the RPC server
handleSearchRawTransasctions path in a few ways:
- Only normalize the filter addresses provided in the command once
rather than for every transaction being returned
- Reset the passes filter flag just before it's used
- Use a local for the encoded address to avoid the bounds checking
overhead of accessing it from the slice
- Avoiding subsequent map lookups once the filter has already passed
Also, while here, modify a few of the related comments to match code
style and consistency.
