This commit converts all block height references to int32 instead of
int64. The current target block production rate is 10 mins per block
which means it will take roughly 40,800 years to reach the maximum
height an int32 affords. Even if the target rate were lowered to one
block per minute, it would still take roughly another 4,080 years to
reach the maximum.
In the mean time, there is no reason to use a larger type which results
in higher memory and disk space usage. However, for now, in order to
avoid having to reserialize a bunch of database information, the heights
are still serialized to the database as 8-byte uint64s.
This is being mainly being done in preparation for further upcoming
infrastructure changes which will use the smaller and more efficient
4-byte serialization in the database as well.
This commit modifies the createTxRawResult code path along with callers
to work with block headers as opposed to btcutil.Blocks. This in turn
allows the code in handleGetRawTransaction and
handleSearchRawTransactions to perform a much cheaper block header load
as opposed to a full block load.
While here, also very slightly optimize the createVinList function to
avoid creating a util.Tx wrapper and to take advantage of the
btcutil.Amount type added after the function was originally written
Create GenerateCmd in btcjson v2. Update tests to check GenerateCmd.
Update chaincfg/params.go with a new bool in Params, GenerateSupported,
with true values in SimNetParams and RegressionNetParams and false in
the others.
Create new flag, discreteMining, in CPUMiner struct.
Add GenerateNBlocks function to cpuminer.go and handleGenerate
function to rpcserver.go.
Update documentation for the RPC calls.
* The cases for the 'addnode' command were previously
stacked on top the new cases for the 'node' command.
The intended behavior was to create a fall through and
handle both commands. However, trying to use this
syntax with a type switch caused the first case to be
ignored.
* addnode' specific functions and structs in the server
have been removed. Instead, the 'add' and 'del' subcommands
are now proxied to the matching 'node' cmd functions.
This commit removes the error returns from the BlockHeader.BlockSha,
MsgBlock.BlockSha, and MsgTx.TxSha functions since they can never fail and
end up causing a lot of unneeded error checking throughout the code base.
It also updates all call sites for the change.
* Gives node operators full control of peer connectivity
* RPC adds ability to disconnect all matching non-persistent peers,
remove persistent peers, and connect to peers making them either
temporary or persistent.
The limited user is specified with the --rpclimituser and
--rpclimitpass options (or the equivalent in the config file).
The config struct and loadConfig() are updated to take the
new options into account. The limited user can have neither
the same username nor the same password as the admin user.
The package-level rpcLimit map in rpcserver.go specifies
the RPC commands accessible by limited users. This map
includes both HTTP/S and websocket commands.
The checkAuth function gets a new return parameter to
signify whether the user is authorized to change server
state. The result is passed to the jsonRPCRead function and
to the WebsocketHandler function in rpcwebsocket.go.
The wsClient struct is updated with an "isAdmin" field
signifying that the client is authorized to change server
state, written by WebsocketHandler and handleMessage.
The handleMessage function also checks the field to
allow or disallow an RPC call.
The following documentation files are updated:
- doc.go
- sample-btcd.conf
- docs/README.md
- docs/json_rpc_api.md
- docs/configure_rpc_server_listen_interfaces.md
Fix#303 by changing the addrindex key prefix to 3 characters so that
it's easy to check length when dropping the index. To drop the old
index, check to make sure we aren't dropping any entries that end in
"sx" or "tx" as those aren't part of the addrindex. Update test to
deal with the new prefix length.
Fix#346 by changing the pointers in the mempool's addrindex map to
wire.ShaHash 32-byte values. This lets them be deleted even if the
transaction data changes places in memory upon expanding the maps.
Change the way addrindex uint32s are stored to big-endian in order to
sort the transactions on disk in chronological/dependency order.
Change the "searchrawtransactions" RPC call to return transactions
from the database before the memory pool so that they're returned in
order. This commit DOES NOT do topological sorting of the memory pool
transactions to ensure they're returned in dependency order. This may
be a good idea for a future enhancement.
Add addrindex versioning to automatically drop the old/incompatible
version of the index and rebuild with the new sort method and key
prefix.
When the fields in the command for the getnetworkhashps RPC don't have the
fields set, use the intended default values.
Since the btcjson package sets these fields to the default values when a
command is unmarshaled from the wire, this typically isn't necessary.
However, when the RPC server calls the handler internally with optional
command fields set to nil, as is the case in getmininginfo, the defaults
need to be set as well.
This commit updates the SearchRawTransactionsCmd verbose parameter in the
latest version of btcjson to an integer to match recent changes to the
previous version of btcjson.
This commit converts the RPC server over to use the new features available
in the latest version of btcjson and improve a few things along the way.
This following summarizes the changes:
- All btcjson imports have been updated to the latest package version
- The help has been significantly improved
- Invoking help with no command specified now provides an alphabetized
list of all supported commands along with one-line usage
- The help for each command is automatically generated and provides much
more explicit information such as the type of each parameter, whether
or not it's optional or required, etc
- The websocket-specific commands are now provided when accessing the
help when connected via websockets
- Help has been added for all websocket-specific commands and is only
accessible when connected via websockets
- The error returns and handling of both the standard and websocket
handlers has been made consistent
- All RPC errors have been converted to the new RPCError type
- Various variables have been renamed for consistency
- Several RPC errors have been improved
- The commands that are marked as unimplemented have been moved into the
separate map where they belong
- Several comments have been improved
- An unnecessary check has been removed from the createrawtransaction
handler
- The command parsing has been restructured a bit to pave the way for
JSON-RPC 2.0 batching support
- When invalid HTTP Basic Access Authentication details are provided to
the websocket endpoint, return a WWW-Authenticate header just like the
non-websocket endpoint
- When a connection to the websocket endpoint fails to properly upgrade,
return a 400 Bad Request HTTP error status code
This commit reorders the RPC server code to more closely match the
ordering used by the rest of the code base such that functions are
typically defined before they are used and near their call site.
* Address index is built up concurrently with the `--addrindex` flag.
* Entire index can be deleted with `--dropaddrindex`.
* New RPC call: `searchrawtransaction`
* Returns all transacitons related to a particular address
* Includes mempool transactions
* Requires `--addrindex` to be activated and fully caught up.
* New `blockLogger` struct has been added to factor our common logging
code
* Wiki and docs updated with new features.
* When an inv is to be sent to the server for relaying, the sender
already has access to the underlying data. So
instead of requiring the relay to look up the data by
hash, the data is now coupled in the request message.
This was previously hard-coded to zero instead of using the offset
provided by the median time source which takes time samples from the other
connected nodes.
This commit modifies the getblocktemplate RPC to correctly handle the
curtime field.
Currently, the RPC server will refuse to serve a block template if the
current time is before the minimum allowed time for a block even though
the real generated block template already accounted for it.
This consists of three changes:
- Remove the unnecessary and incorrect check in the RPC invocation for the
current time against the min required time since it is already handled
properly by the block template generation.
- Expose the network time source to the RPC work state and use the
adjusted time for checking against the maximum allowed time instead of
the current time.
- Set the returned RPC result curtime field to the time of the generated
block header.
Fixes#209.
This commit modifies the creation of RPC results to ignore errors in
script disassembly since they already contain the error string inline and
the RPC results must still be generated regardless.
This was already done in the decodescript RPC, however the same thing was
not being done in the higher level verbose transaction results. This
applies to both the createrawtransaction and decoderawtransaction RPCs.
Also, since this was the only thing that could error within those
functions, the error returns and caller checking of now non-existent
errors have been removed.
Fixes#210.
This commit introduces a new flag, --notls, which can be used to disable
TLS for the RPC server. However, the flag can only be used when the RPC
server is bound to localhost interfaces. This is intended to prevent the
situation where someone decides they want to expose the RPC server to the
web for remote management/access, but forgot they have TLS disabled.
This commit corrects the error check from the createTxRawResult call in
handleGetRawTransaction. It was previously given a different name which
resulted in the wrong error being checked.
Fixes#196.
This prevents a downgrade attack to the vulnerable SSLv3. While here,
go ahead and require at least TLS 1.2 since TLS 1.0 and 1.1 have their
own set of issues and it's only a matter of time before those would
need to be completely avoided as well.
ok @davecgh
