This converts the IsPayToPubKeyHash function to analyze the raw script
instead of using the far less efficient parseScript, thereby
significantly optimization the function.
In order to accomplish this, it introduces two new functions. The first
one is named extractPubKeyHash and works with the raw script bytes
to simultaneously determine if the script is a pay-to-pubkey-hash script,
and in the case it is, extract and return the hash. The second new
function is named isPubKeyHashScript and is defined in terms of the
former.
The extract function approach was chosen because it is common for
callers to want to only extract relevant details from a script if the
script is of the specific type. Extracting those details requires
performing the exact same checks to ensure the script is of the correct
type, so it is more efficient to combine the two into one and define the
type determination in terms of the result so long as the extraction does
not require allocations.
The following is a before and after comparison of analyzing a large
script:
benchmark old ns/op new ns/op delta
BenchmarkIsPubKeyHashScript-8 62228 0.45 -100.00%
benchmark old allocs new allocs delta
BenchmarkIsPubKeyHashScript-8 1 0 -100.00%
benchmark old bytes new bytes delta
BenchmarkIsPubKeyHashScript-8 311299 0 -100.00%
This converts the IsPayToScriptHash function to analyze the raw script
instead of using the far less efficient parseScript, thereby
significantly optimizing the function.
In order to accomplish this, it introduces four new functions:
extractCompressedPubKey, extractUncompressedPubKey, extractPubKey, and
isPubKeyScript. The extractPubKey function makes use of
extractCompressedPubKey and extractUncompressedPubKey to combine their
functionality as a convenience and isPubKeyScript is defined in terms of
extractPubKey.
The extractCompressedPubKey works with the raw script bytes to
simultaneously determine if the script is a pay-to-compressed-pubkey
script, and in the case it is, extract and return the raw compressed
pubkey bytes.
Similarly, the extractUncompressedPubKey works in the same way except it
determines if the script is a pay-to-uncompressed-pubkey script and
returns the raw uncompressed pubkey bytes in the case it is.
The extract function approach was chosen because it is common for
callers to want to only extract relevant details from a script if the
script is of the specific type. Extracting those details requires
performing the exact same checks to ensure the script is of the correct
type, so it is more efficient to combine the two into one and define the
type determination in terms of the result so long as the extraction does
not require allocations.
The following is a before and after comparison of analyzing a large
script:
benchmark old ns/op new ns/op delta
BenchmarkIsPubKeyScript-8 62323 2.97 -100.00%
benchmark old allocs new allocs delta
BenchmarkIsPubKeyScript-8 1 0 -100.00%
benchmark old bytes new bytes delta
BenchmarkIsPubKeyScript-8 311299 0 -100.00%
This converts the asSmallInt function to accept an opcode as a byte
instead of the internal opcode data struct in order to make it more
flexible for raw script analysis.
It also updates all callers accordingly.
This converts the isSmallInt function to accept an opcode as a byte
instead of the internal opcode data struct in order to make it more
flexible for raw script analysis.
The comment is modified to explicitly call out the script version
semantics.
Finally, it updates all callers accordingly.
This commit implements the flag activation portion of BIP 0147. The
verification behavior triggered by the NULLDUMMY script verification
flag has been present within btcd for some time, however it wasn’t
activated by default.
With this commit, once segwit has activated, the ScriptStrictMultiSig
will also be activated within the Script VM. Additionally, the
ScriptStrictMultiSig is now a standard script verification flag which
is used unconditionally within the mempool.
This commit implements full witness program validation for the
currently defined version 0 witness programs. This includes validation
logic for nested p2sh, p2wsh, and p2wkh. Additionally, when in witness
validation mode, an additional set of constrains are enforced such as
using the new sighash digest algorithm and enforcing clean stack
behavior within witness programs.
This commit introduces a series of internal and external helper
functions which enable the txscript package to be aware of the new
standard script templates introduced as part of BIP0141. The two new
standard script templates recognized are pay-to-witness-key-hash
(P2WKH) and pay-to-witness-script-hash (P2WSH).
ScriptVerifyNullFail defines that signatures must be empty if a
CHECKSIG or CHECKMULTISIG operation fails.
This commit also enables ScriptVerifyNullFail at the mempool policy
level.
This converts the majority of script errors from generic errors created
via errors.New and fmt.Errorf to use a concrete type that implements the
error interface with an error code and description.
This allows callers to programmatically detect the type of error via
type assertions and an error code while still allowing the errors to
provide more context.
For example, instead of just having an error the reads "disabled opcode"
as would happen prior to these changes when a disabled opcode is
encountered, the error will now read "attempt to execute disabled opcode
OP_FOO".
While it was previously possible to programmatically detect many errors
due to them being exported, they provided no additional context and
there were also various instances that were just returning errors
created on the spot which callers could not reliably detect without
resorting to looking at the actual error message, which is nearly always
bad practice.
Also, while here, export the MaxStackSize and MaxScriptSize constants
since they can be useful for consumers of the package and perform some
minor cleanup of some of the tests.
This modifies the recently-added NullDataScript function in several
ways in an effort to make them more consistent with the tests in the
rest of the code base and improve/correct the logic:
- Use the hexToBytes and mustParseShortForm functions
- Consistently format the test errors
- Replace the valid bool flag with an expected error and test against it
- Ensure the returned script type is the expected type in all cases
This adds a new function named NullDataScript to the txscript package that returns a provably-pruneable OP_RETURN script with the provided data. The function will return an error if the provided data is larger than the maximum allowed length for a nulldata script to be be considered standard.
This corrects the isNullData standard transaction type test to work
properly with canonically-encoded data pushes. In particular, single
byte data pushes that are small integers (0-16) are converted to the
equivalent numeric opcodes when canonically encoded and the code failed
to detect them properly.
It also adds several tests to ensure that both canonical and
non-canonical nulldata scripts are recognized properly and modifies the
test failure print to include the script that failed.
This does not affect consensus since it is just a standardness check.
isMultiSig was not verifying the number of pubkeys specified matched
the number of pubkeys provided. This caused certain non-standard
scripts to be considered multisig scripts.
However, the script still would have failed during execution.
NOTE: This only affects whether or not the script is considered
standard and does NOT affect consensus.
Also, add a test for this check.
See https://github.com/bitcoin/bips/blob/master/bip-0065.mediawiki for
more information.
This commit mimics Bitcoin Core commit bc60b2b4b401f0adff5b8b9678903ff8feb5867b
and includes additional tests from Bitcoin Core commit
cb54d17355864fa08826d6511a0d7692b21ef2c9
We've already been generating lowS sigs for quite a while. This removes
the malleability vector.
This mimics Bitcoin Core commit 49dd5c629df0a08cf3b1ea8085c03312d1a81696
- Move reference tests to test package since they are intended to
exercise the engine as callers would
- Improve the short form script parsing to allow additional opcodes:
DATA_#, OP_#, FALSE, TRUE
- Make use of a function to decode hex strings rather than manually
defining byte slices
- Update the tests to make use of the short form script parsing logic
rather than manually defining byte slices
- Consistently replace all []byte{} and [][]byte{} with nil
- Define tests only used in a specific function inside that func
- Move invalid flag combination test to engine_test since that is what
it is testing
- Remove all redundant script tests in favor of the JSON-based tests in
the data directory.
- Move several functions from internal_test.go to the test files
associated with what the tests are checking
This commit moves all code related to standard scripts into a separate
file named standard.go as well as the associated tests into
standard_test.go. Since the code in address.go and address_test.go is
only related to standard scripts, it has been combined into the new
files and the old files deleted.
The intent here is to make it clear that the code in standard.go is not
related to consensus.
