The block index now tracks the set of dirty block nodes with status
changes that haven't been persisted and flushes the changes to the DB
at the appropriate times.
The bucket contains block headers keyed by the block height encoded as
big-endian concatenated with the block hash. This allows block headers
to be fetched from the DB in height order with a cursor.
These method allows safe concurrent access to reading and modifying
block node statuses. When block statuses get persisted in a later
change, the setter methods can be used to mark block nodes as dirty.
Each node in the block index records some flags about its validation
state. This is just stored in memory for now, but can save effort if
attempting to reconnect a block that failed validation or was
disconnected.
This was only used to test block proposals, which has been changed to
instead use CheckConnectBlockTemplate. The flag complicated the
implementation of some chain processing routines and would be
difficult to implement with headers-first syncing.
This propagates the interrupt channel through to blockchain and the
indexers so that it is possible to interrupt long-running operations
such as catching up indexes.
This refactors the code that locates blocks (inventory discovery) out of
server and into blockchain where it can make use of the new much more
efficient chain view and more easily be tested. As an aside, it really
belongs in blockchain anyways since it's purely dealing with the block
index and best chain.
Since the majority of the network has moved to header-based semantics,
this also provides an additional optimization to allow headers to be
located directly versus needing to first discover the hashes and then
fetch the headers.
The new functions are named LocateBlocks and LocateHeaders. The former
returns a slice of located hashes and the latter returns a slice of
located headers.
Finally, it also updates the RPC server getheaders call and related
plumbing to use the new LocateHeaders function.
A comprehensive suite of tests is provided to ensure both functions
behave correctly for both correct and incorrect block locators.
- Remove inMainChain from block nodes since that can now be efficiently
determined by using the chain view
- Track the best chain via a chain view instead of a single block node
- Use the tip of the best chain view everywhere bestNode was used
- Update chain view tip instead of updating best node
- Change reorg logic to use more efficient chain view fork finding logic
- Change block locator code over to use more efficient chain view logic
- Remove now unused block-index-based block locator code
- Move BlockLocator definition to chain.go
- Move BlockLocatorFromHash and LatestBlockLocator to chain.go
- Update both to use more efficient chain view logic
- Rework IsCheckpointCandidate to use block index and chain view
- Optimize MainChainHasBlock to use chain view instead of hitting db
- Move to chain.go since it no longer involves database I/O
- Removed error return since it can no longer fail
- Optimize BlockHeightByHash to use chain view instead of hitting db
- Move to chain.go since it no longer involves database I/O
- Removed error return since it can no longer fail
- Optimize BlockHashByHeight to use chain view instead of hitting db
- Move to chain.go since it no longer involves database I/O
- Removed error return since it can no longer fail
- Optimize HeightRange to use chain view instead of hitting db
- Move to chain.go since it no longer involves database I/O
- Optimize BlockByHeight to use chain view for main chain check
- Optimize BlockByHash to use chain view for main chain check
This removes the DisableVerify function and related state since nothing
uses it anymore since the command line option was removed. It is a
remnant of initial development.
This modifies the code that determines the most recently known
checkpoint to take advantage of recent changes which make the entire
block index available in memory by only storing a reference to the
specific node in the index that represents the latest known checkpoint.
Previously, the entire block was stored and new checkpoints required
loading it from the database.
This completely removes the threshold state database caching code since
it can very quickly be calculated at startup now that the entire block
index is loaded first.
This reworks the block index code such that it loads all of the headers
in the main chain at startup and constructs the full block index
accordingly.
Since the full index from the current best tip all the way back to the
genesis block is now guaranteed to be in memory, this also removes all
code related to dynamically loading the nodes and updates some of the
logic to take advantage of the fact traversing the block index can
longer potentially fail. There are also more optimizations and
simplifications that can be made in the future as a result of this.
Due to removing all of the extra overhead of tracking the dynamic state,
and ensuring the block node structs are aligned to eliminate extra
padding, the end result of a fully populated block index now takes quite
a bit less memory than the previous dynamically loaded version.
The main downside is that it now takes a while to start whereas it was
nearly instant before, however, it is much better to provide more
efficient runtime operation since that is its ultimate purpose and the
benefits far outweigh this downside.
Some benefits are:
- Since every block node is in memory, the recent code which
reconstructs headers from block nodes means that all headers can
always be served from memory which is important since the majority of
the network has moved to header-based semantics
- Several of the error paths can be removed since they are no longer
necessary
- It is no longer expensive to calculate CSV sequence locks or median
times of blocks way in the past
- It will be possible to create much more efficient iteration and
simplified views of the overall index
- The entire threshold state database cache can be removed since it is
cheap to construct it from the full block index as needed
An overview of the logic changes are as follows:
- Move AncestorNode from blockIndex to blockNode and greatly simplify
since it no longer has to deal with the possibility of dynamically
loading nodes and related failures
- Rename RelativeNode to RelativeAncestor, move to blockNode, and
redefine in terms of AncestorNode
- Move CalcPastMedianTime from blockIndex to blockNode and remove no
longer necessary test for nil
- Change calcSequenceLock to use Ancestor instead of RelativeAncestor
since it reads more clearly
This takes care of a few minor nits on the recently merged subscribe
code. In particular:
- Avoid extra unnecessary allocation on notifications slice
- Avoid defer overhead on notification mutex in sendNotifications
- Make test function comment start with the name of the function per
Effective Go guidelines
- Use constant for number of subscribers in test
- Don't exceed column 80 in test print
The BlockChain struct emits notifications for various events, but
it is only possible to register one listener. This changes the
interface and implementations to allow multiple listeners.
This replaces the ErrDoubleSpend and ErrMissingTx error codes with a
single error code named ErrMissingTxOut and updates the relevant errors
and expected test results accordingly.
Once upon a time, the code relied on a transaction index, so it was able
to definitively differentiate between a transaction output that
legitimately did not exist and one that had already been spent.
However, since the code now uses a pruned utxoset, it is no longer
possible to reliably differentiate since once all outputs of a
transaction are spent, it is removed from the utxoset completely.
Consequently, a missing transaction could be either because the
transaction never existed or because it is fully spent.
This commit implements the new block validation rules as defined by
BIP0141. The new rules include the constraints that if a block has
transactions with witness data, then there MUST be a commitment within
the conies transaction to the root of a new merkle tree which commits
to the wtxid of all transactions. Additionally, rather than limiting
the size of a block by size in bytes, blocks are now limited by their
total weight unit. Similarly, a newly define “sig op cost” is now used
to limit the signature validation cost of transactions found within
blocks.
This commit modifies the existing block validation logic to examine the
current version bits state of the CSV soft-fork, enforcing the new
validation rules (BIPs 68, 112, and 113) accordingly based on the
current `ThesholdState`.
This modifies the blockNode and BestState structs in the blockchain
package to store hashes directly instead of pointers to them and updates
callers to deal with the API change in the exported BestState struct.
In general, the preferred approach for hashes moving forward is to store
hash values in complex data structures, particularly those that will be
used for cache entries, and accept pointers to hashes in arguments to
functions.
Some of the reasoning behind making this change is:
- It is generally preferred to avoid storing pointers to data in cache
objects since doing so can easily lead to storing interior pointers
into other structs that then can't be GC'd
- Keeping the hash values directly in the block node provides better
cache locality
This refactors the block index logic into a separate struct and
introduces an individual lock for it so it can be queried independent of
the chain lock.
This modifies the block node structure to include a couple of extra
fields needed to be able to reconstruct the block header from a node,
and exposes a new function from chain to fetch the block headers which
takes advantage of the new functionality to reconstruct the headers from
memory when possible. Finally, it updates both the p2p and RPC servers
to make use of the new function.
This is useful since many of the block header fields need to be kept in
order to form the block index anyways and storing the extra fields means
the database does not have to be consulted when headers are requested if
the associated node is still in memory.
The following timings show representative performance gains as measured
from one system:
new: Time to fetch 100000 headers: 59ms
old: Time to fetch 100000 headers: 4783ms
This removes the CalcPastMedianTime since it is now exposed much more
efficiently via the MedianTime field of the BestState snapshot returned
from the BestSnapshot function.
This modifies the block nodes used in the blockchain package for keeping
track of the block index to use int64 for the timestamps instead of
time.Time.
This is being done because a time.Time takes 24 bytes while an int64
only takes 8 and the plan is to eventually move the entire block index
into memory instead of the current dynamically-loaded version, so
cutting the number of bytes used for the timestamp by a third is highly
desirable.
Also, the consensus code requires working with unix-style timestamps
anyways, so switching over to them in the block node does not seem
unreasonable.
Finally, this does not go so far as to change all of the time.Time
references, particularly those that are in the public API, so it is
purely an internal change.
This modifies the blockchain code to store all blocks that have passed
proof-of-work and contextual validity tests in the database even if they
may ultimately fail to connect.
This eliminates the need to store those blocks in memory, allows them to
be available as orphans later even if they were never part of the main
chain, and helps pave the way toward being able to separate the download
logic from the connection logic.
This contains a bit of cleanup and additional logic to improve the
recently-added ability to specify additional checkpoints via the
--addcheckpoint option.
In particular:
- Improve error messages in the checkpoint parsing
- Correct the mergeCheckpoints function to weed out duplicate height
checkpoints while using the most-recently provided one as described by
its comment
- Add an assertion to blockchain.New that the provided checkpoints are
sorted as required
- Keep comments to 80 columns and use two spaces after periods in them to
be consistent with the rest of the code base
- Make the entry in doc.go match the actual btcd -h output
Now that all softforking is done via BIP0009 versionbits, replace the
old isMajorityVersion deployment mechanism with hard coded historical
block heights at which they became active.
Since the activation heights vary per network, this adds new parameters
to the chaincfg.Params struct for them and sets the correct heights at
which each softfork became active on each chain.
It should be noted that this is a technically hard fork since the
behavior of alternate chain history is different with these hard-coded
activation heights as opposed to the old isMajorityVersion code. In
particular, an alternate chain history could activate one of the soft
forks earlier than these hard-coded heights which means the old code
would reject blocks which violate the new soft fork rules whereas this
new code would not.
However, all of the soft forks this refers to were activated so far in
the chain history there is there is no way a reorg that long could
happen and checkpoints reject alternate chains before the most recent
checkpoint anyways. Furthermore, the same change was made in Bitcoin
Core so this needs to be changed to be consistent anyways.
This commit adds all of the infrastructure needed to support BIP0009
soft forks.
The following is an overview of the changes:
- Add new configuration options to the chaincfg package which allows the
rule deployments to be defined per chain
- Implement code to calculate the threshold state as required by BIP0009
- Use threshold state caches that are stored to the database in order
to accelerate startup time
- Remove caches that are invalid due to definition changes in the
params including additions, deletions, and changes to existing
entries
- Detect and warn when a new unknown rule is about to activate or has
been activated in the block connection code
- Detect and warn when 50% of the last 100 blocks have unexpected
versions.
- Remove the latest block version from wire since it no longer applies
- Add a version parameter to the wire.NewBlockHeader function since the
default is no longer available
- Update the miner block template generation code to use the calculated
block version based on the currently defined rule deployments and
their threshold states as of the previous block
- Add tests for new error type
- Add tests for threshold state cache
This commit adds a new function to the package: `LockTimeToSequence`.
The function is a simple utility function which aides the caller to
mapping a targeted time or block based relative lock-time to the
appropriate sequence number.
This commit introduces the concept of “sequence locks” borrowed from
Bitcoin Core for converting an input’s relative time-locks to an
absolute value based on a particular block for input maturity
evaluation.
A sequence lock is computed as the most distant maturity height/time
amongst all the referenced outputs within a particular transaction.
A transaction with sequence locks activated within any of its inputs
can *only* be included within a block if from the point-of-view of that
block either the time-based or height-based maturity for all referenced
inputs has been met.
A transaction with sequence locks can only be accepted to the mempool
iff from the point-of-view of the *next* (yet to be found block) all
referenced inputs within the transaction are mature.
This removes the exported CalcPastTimeMedian function from the
blockchain package as it is no longer needed since the information is
now available via the BestState snapshot.
Also, update the only known caller of this, which is the chain state in
block manager, to use the snapshot instead. In reality, now that
everything the block manager chain state provides is available via the
blockchain BestState snapshot, the entire thing can be removed, however
that will be done in a separate to commit to keep the changes targeted.
This modifies the blockchain.ProcessBlock function to return an
additional boolean as the first parameter which indicates whether or not
the block ended up on the main chain.
This is primarily useful for upcoming test code that needs to be able to
tell the difference between a block accepted to a side chain and a block
that either extends the main chain or causes a reorganize that causes it
to become the main chain. However, it is also useful for the addblock
utility since it allows a better error in the case a file with out of
order blocks is provided.
This adds a new field to the best chain state snapshot for the
calculated past median time as returned by the calcPastMedianTime
function. This is useful since it provides fast access to it without
having to acquire the chain lock which is needed to recalculate it.
This will ultimately allow the associated exported function to be
removed since it only exists to be able to calculate this exact value,
however this commit only introduces the new field in order to keep the
changes minimal.
This moves several of the chain constants to the Params struct in the
chaincfg package which is intended for that purpose. This is mostly a
backport of the same modifications made in Decred along with a few
additional things cleaned up.
The following is an overview of the changes:
- Comment all fields in the Params struct definition
- Add locals to BlockChain instance for the calculated values based on
the provided chain params
- Rename the following param fields:
- SubsidyHalvingInterval -> SubsidyReductionInterval
- ResetMinDifficulty -> ReduceMinDifficulty
- Add new Param fields:
- CoinbaseMaturity
- TargetTimePerBlock
- TargetTimespan
- BlocksPerRetarget
- RetargetAdjustmentFactor
- MinDiffReductionTime
This is mostly a backport of some of the same modifications made in
Decred along with a few additional things cleaned up. In particular,
this updates the code to make use of the new chainhash package.
Also, since this required API changes anyways and the hash algorithm is
no longer tied specifically to SHA, all other functions throughout the
code base which had "Sha" in their name have been changed to Hash so
they are not incorrectly implying the hash algorithm.
The following is an overview of the changes:
- Remove the wire.ShaHash type
- Update all references to wire.ShaHash to the new chainhash.Hash type
- Rename the following functions and update all references:
- wire.BlockHeader.BlockSha -> BlockHash
- wire.MsgBlock.BlockSha -> BlockHash
- wire.MsgBlock.TxShas -> TxHashes
- wire.MsgTx.TxSha -> TxHash
- blockchain.ShaHashToBig -> HashToBig
- peer.ShaFunc -> peer.HashFunc
- Rename all variables that included sha in their name to include hash
instead
- Update for function name changes in other dependent packages such as
btcutil
- Update copyright dates on all modified files
- Update glide.lock file to use the required version of btcutil
Rather than making the caller to pass in the median time source on
ProcessBlock and IsCurrent, modify the Config struct to include the
median time source and associate it with the chain instance when it is
created.
This is being done because both the ProcessBlock and IsCurrent functions
require access to the blockchain state already, it is a little bit safer
to ensure the time source matches the chain instance state, it
simplifies the caller logic, and it also allows its use within the logic
of the blockchain package itself which will be required by upcoming
rule change warning logic that is part of BIP9.
This removes the root field and all references to it from the BlockChain
since it is no longer required.
It was previously required because the chain state was not initialized
when the instance was created. However, that is no longer the case, so
there is no reason to keep it around any longer.
This introduces a new indexing infrastructure for supporting optional
indexes using the new database and blockchain infrastructure along with
two concrete indexer implementations which provide both a
transaction-by-hash and a transaction-by-address index.
The new infrastructure is mostly separated into a package named indexers
which is housed under the blockchain package. In order to support this,
a new interface named IndexManager has been introduced in the blockchain
package which provides methods to be notified when the chain has been
initialized and when blocks are connected and disconnected from the main
chain. A concrete implementation of an index manager is provided by the
new indexers package.
The new indexers package also provides a new interface named Indexer
which allows the index manager to manage concrete index implementations
which conform to the interface.
The following is high level overview of the main index infrastructure
changes:
- Define a new IndexManager interface in the blockchain package and
modify the package to make use of the interface when specified
- Create a new indexers package
- Provides an Index interface which allows concrete indexes to plugin
to an index manager
- Provides a concrete IndexManager implementation
- Handles the lifecycle of all indexes it manages
- Tracks the index tips
- Handles catching up disabled indexes that have been reenabled
- Handles reorgs while the index was disabled
- Invokes the appropriate methods for all managed indexes to allow
them to index and deindex the blocks and transactions
- Implement a transaction-by-hash index
- Makes use of internal block IDs to save a significant amount of
space and indexing costs over the old transaction index format
- Implement a transaction-by-address index
- Makes use of a leveling scheme in order to provide a good tradeoff
between space required and indexing costs
- Supports enabling and disabling indexes at will
- Support the ability to drop indexes if they are no longer desired
The following is an overview of the btcd changes:
- Add a new index logging subsystem
- Add new options --txindex and --addrindex in order to enable the
optional indexes
- NOTE: The transaction index will automatically be enabled when the
address index is enabled because it depends on it
- Add new options --droptxindex and --dropaddrindex to allow the indexes
to be removed
- NOTE: The address index will also be removed when the transaction
index is dropped because it depends on it
- Update getrawtransactions RPC to make use of the transaction index
- Reimplement the searchrawtransaction RPC that makes use of the address
index
- Update sample-btcd.conf to include sample usage for the new optional
index flags
