claimtrie: allows '*' in claim name

1. Fixed a bug, which reads certs even TLS is disabled

2. Persists Stratum TCP connection with auto-reconnect.
   (retry backoff increases from 1s to 60s maximum)

3. Stratum update jobs on previous notifications are canceled
   when a new notification arrives.

   Usually, the jobs are so short and completed immediately.
   However, if the Stratum connection is broken, this prevents
   the bridge from accumulating stale jobs.

.github/workflows/basic-check.yml

@@ -9,7 +9,7 @@ jobs:
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        go: [1.18.2]
+        go: [1.19]
     steps:
       - name: Set up Go
         uses: actions/setup-go@v2

.github/workflows/full-sync-part-1.yml

@@ -14,7 +14,7 @@ jobs:
     runs-on: self-hosted
     strategy:
       matrix:
-        go: [1.18.2]
+        go: [1.19]
     steps:
       - run: |
           echo "Note ${{ github.event.inputs.note }}!"

.github/workflows/full-sync-part-2.yml

@@ -14,7 +14,7 @@ jobs:
     runs-on: self-hosted
     strategy:
       matrix:
-        go: [1.18.2]
+        go: [1.19]
     steps:
       - run: |
           echo "Note ${{ github.event.inputs.note }}!"

.github/workflows/golangci-lint.yml

@@ -4,7 +4,7 @@ env:
   # go needs absolute directories, using the $HOME variable doesn't work here.
   GOCACHE: /home/runner/work/go/pkg/build
   GOPATH: /home/runner/work/go
-  GO_VERSION: '^1.18.2'
+  GO_VERSION: '^1.19'
 
 on:
   push:

.github/workflows/release.yml

@@ -28,7 +28,7 @@ jobs:
         name: Set up Go
         uses: actions/setup-go@v2
         with:
-          go-version: 1.18.2
+          go-version: 1.19
 
       # Login against a Docker registry except on PR
       # https://github.com/docker/login-action

Dockerfile

@@ -16,7 +16,7 @@
 
 ARG ARCH=amd64
 
-FROM golang:1.18.2 AS build-container
+FROM golang:1.19 AS build-container
 
 ARG ARCH
 

README.md

@@ -5,17 +5,310 @@
 [![ISC License](https://img.shields.io/badge/license-ISC-blue.svg)](http://copyfree.org)
 <!--[![GoDoc](https://img.shields.io/badge/godoc-reference-blue.svg)](https://pkg.go.dev/github.com/lbryio/lbcd)-->
 
-`lbcd` is a full node implementation of LBRY's blockchain written in Go (golang).
+**lbcd** is a full node implementation of LBRY's blockchain written in Go (golang).
 
-This project is currently under active development and is in a Beta state while
-we ensure it matches LBRYcrd's functionality. The intention is that it properly
-downloads, validates, and serves the block chain using the exact rules
-(including consensus bugs) for block acceptance as LBRYcrd.
-We have taken great care to avoid lbcd causing a fork to the blockchain.
+Software stack developed by LBRY teams has been all migrated to **lbcd**.
 
-Note: `lbcd` does *NOT* include wallet functionality.  That functionality is provided by the
+We're working with exchanges and pool oerators to migrate from **lbrycrd** to **lbcd**.
+
+If you're integrating with **lbcd+lbcwallet**, please check the Wiki for current [supported RPCs](wiki/RPC-availability).
+
+Note: **lbcd** does *NOT* include wallet functionality.  That functionality is provided by the
 [lbcwallet](https://github.com/lbryio/lbcwallet) and the [LBRY SDK](https://github.com/lbryio/lbry-sdk).
 
+## Requirements
+
+All common operating systems are supported. lbcd requires at least 8GB of RAM
+and at least 100GB of disk storage. Both RAM and disk requirements increase slowly over time.
+Using a fast NVMe disk is recommended.
+
+## Installation
+
+Acquire binary files from [releases](https://github.com/lbryio/lbcd/releases)
+
+For compilation, [Go](http://golang.org) 1.19 or newer is required.
+Install Go according to its [installation instructions](http://golang.org/doc/install).
+
+``` sh
+# lbcd (full node)
+$ go install github.com/lbryio/lbcd@latest
+
+# lbcctl (rpc client utility)
+$ go install github.com/lbryio/lbcd/cmd/lbcctl@latest
+```
+
+## Usage
+
+Default application folder `${LBCDDIR}`:
+
+- Linux: `~/.lbcd/`
+- MacOS: `/Users/<username>/Library/Application Support/Lbcd/`
+
+### Start the **lbcd**
+
+``` sh
+./lbcd
+```
+
+**lbcd** loads config file at `"${LBCDDIR}/lbcd.conf"`.
+
+If no config is found, it creates a [default one](sample-lbcd.conf), which includes all available options with default settings except randomly generated *RPC credentials* (see below).
+
+### RPC server
+
+RPC credentials (`rpcuser` and `rpcpass`) is required to enable RPC server. It can be specify in the `"${LBCDDIR}/lbcd.conf"`, using command line options:
+
+``` sh
+./lbcd --rpcuser=rpcuser --rpcpass=rpcpass
+
+2022-07-28 12:28:19.627 [INF] RPCS: RPC server listening on 0.0.0.0:9245
+2022-07-28 12:28:19.627 [INF] RPCS: RPC server listening on [::]:9245
+```
+
+### Working with TLS (Default)
+
+By default, **lbcd** runs RPC server with TLS enabled, and generates the `rpc.cert` and `rpc.key` under `${LBCDDIR}`, if not exist already.
+
+To interact with the RPC server, a client has to either specify the `rpc.cert`, or disable the certification verification for TLS.
+
+Interact with **lbcd** RPC using `lbcctl`
+
+``` sh
+$ ./lbcctl --rpccert "${LBCDDIR}/rpc.cert" getblockcount
+
+# or disable the certificate verification
+$ ./lbcctl --skipverify getblockcount
+
+1200062
+```
+
+Interact with **lbcd** RPC using `curl`
+
+``` sh
+$ curl --user rpcuser:rpcpass \
+        --cacert "${LBCDDIR}/rpc.cert" \
+        --data-binary '{"jsonrpc": "1.0", "id": "curltest", "method": "getblockcount", "params": []}' \
+        -H 'content-type: text/plain;' \
+        https://127.0.0.1:9245/
+
+# or disable the certificate verification
+$ curl --user rpcuser:rpcpass \
+        --insecure \
+        --data-binary '{"jsonrpc": "1.0", "id": "curltest", "method": "getblockcount", "params": []}' \
+        -H 'content-type: text/plain;' \
+        https://127.0.0.1:9245/
+```
+
+``` json
+{"jsonrpc":"1.0","result":1200062,"error":null,"id":"curltest"}
+```
+
+### Working without TLS
+
+TLS can be disabled using the `--notls` option:
+
+``` sh
+$ ./lbcd --notls
+```
+
+``` sh
+$ ./lbcctl --notls getblockcount
+
+1200062
+```
+
+``` sh
+$ curl --user rpcuser:rpcpass \
+        --data-binary '{"jsonrpc": "1.0", "id": "curltest", "method": "getblockcount", "params": []}' \
+        -H 'content-type: text/plain;' \
+        http://127.0.0.1:9245/
+```
+
+``` json
+{"jsonrpc":"1.0","result":1200062,"error":null,"id":"curltest"}
+```
+
+## Using Snapshots (optional)
+
+[Snapshots](https://snapshots.lbry.com/blockchain/) are created bi-weekly to help new users catch up current block height.
+
+The snapshots are archived and compressed in [zstd](https://facebook.github.io/zstd/) format for it's compression ratio and speed.
+
+Download the snapshot, and uncompress it:
+
+``` sh
+time curl -O https://snapshots.lbry.com/blockchain/lbcd_snapshot_1199527_v0.22.105_2022-07-27.tar.zst
+zstd -d --stdout lbcd_snapshot_1199527_v0.22.105_2022-07-27.tar.zst | tar xf - -C "${LBCDDIR}"
+```
+
+If preferred, a user can download and uncompress the snapshot on the fly:
+By the time the download is finished, the snapshots should be almost uncompressed already.
+
+``` sh
+mkdir -p "${LBCDDIR}"
+
+time curl https://snapshots.lbry.com/blockchain/lbcd_snapshot_1199527_v0.22.105_2022-07-27.tar.zst | zstd -d --stdout | tar xf - -C "${LBCDDIR}"
+
+#  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
+#                                 Dload  Upload   Total   Spent    Left  Speed
+# 100 64.9G  100 64.9G    0     0  37.0M      0  0:29:49  0:29:49 --:--:-- 33.0M
+#
+# real    29m49.962s
+# user    6m53.710s
+# sys     8m56.545s
+```
+
+## Working with RPCs
+
+Using `lbcctl -l` to list available RPCs:
+
+``` sh
+$ lbcctl -l
+
+Chain Server Commands:
+addnode "addr" "add|remove|onetry"
+createrawtransaction [{"txid":"value","vout":n},...] {"address":amount,...} (locktime)
+debuglevel "levelspec"
+decoderawtransaction "hextx"
+decodescript "hexscript"
+deriveaddresses "descriptor" ({"value":value})
+fundrawtransaction "hextx" {"changeaddress":changeaddress,"changeposition":changeposition,"changetype":changetype,"includewatching":includewatching,"lockunspents":lockunspents,"feerate":feerate,"subtractfeefromoutputs":[subtractfeefromoutput,...],"replaceable":replaceable,"conftarget":conftarget,"estimatemode":estimatemode} (iswitness)
+generate numblocks
+
+[skipped]
+
+Wallet Server Commands (--wallet):
+addmultisigaddress nrequired ["key",...] ("account")
+addwitnessaddress "address"
+backupwallet "destination"
+createmultisig nrequired ["key",...]
+createnewaccount "account"
+createwallet "walletname" (disableprivatekeys=false blank=false passphrase="" avoidreuse=false)
+dumpprivkey "address"
+dumpwallet "filename"
+encryptwallet "passphrase"
+estimatefee numblocks
+estimatepriority numblocks
+estimatesmartfee conftarget (estimatemode="CONSERVATIVE")
+getaccount "address"
+getaccountaddress "account"
+getaddressesbyaccount "account"
+
+[skipped]
+```
+
+Using `lbcctl help rpcname` to show the RPC spec:
+
+``` sh
+$ lbcctl help getblock
+
+getblock "hash" (verbosity=1)
+
+Returns information about a block given its hash.
+
+Arguments:
+1. hash      (string, required)             The hash of the block
+2. verbosity (numeric, optional, default=1) Specifies whether the block data should be returned as a hex-encoded string (0), as parsed data with a slice of TXIDs (1), or as parsed data with parsed transaction data (2)
+
+Result (verbosity=0):
+"value" (string) Hex-encoded bytes of the serialized block
+
+Result (verbosity=1):
+{
+ "getblockverboseresultbase": { (object)
+  "hash": "value",              (string)          The hash of the block (same as provided)
+  "confirmations": n,           (numeric)         The number of confirmations
+  "strippedsize": n,            (numeric)         The size of the block without witness data
+  "size": n,                    (numeric)         The size of the block
+  "weight": n,                  (numeric)         The weight of the block
+  "height": n,                  (numeric)         The height of the block in the block chain
+  "version": n,                 (numeric)         The block version
+  "versionHex": "value",        (string)          The block version in hexadecimal
+  "merkleroot": "value",        (string)          Root hash of the merkle tree
+  "time": n,                    (numeric)         The block time in seconds since 1 Jan 1970 GMT
+  "mediantime": n,              (numeric)         The median block time in seconds since 1 Jan 1970 GMT
+  "nonce": n,                   (numeric)         The block nonce
+  "bits": "value",              (string)          The bits which represent the block difficulty
+  "difficulty": n.nnn,          (numeric)         The proof-of-work difficulty as a multiple of the minimum difficulty
+  "chainwork": "value",         (string)          Expected number of hashes required to produce the chain up to this block (in hex)
+  "previousblockhash": "value", (string)          The hash of the previous block
+  "nextblockhash": "value",     (string)          The hash of the next block (only if there is one)
+  "nameclaimroot": "value",     (string)          Root hash of the claim trie
+  "nTx": n,                     (numeric)         The number of transactions (aka, count of TX)
+ },
+ "tx": ["value",...],           (array of string) The transaction hashes (only when verbosity=1)
+}
+```
+
+## **lbcd** & **lbcwallet**
+
+*Wallet* related functianlities and RPCs are provided by a separate programe - [**lbcwallet**](https://github.com/lbryio/lbcwallet).
+
+Once setup, lbcwallet can serve wallet related RPCs as well as proxy lbcd RPCs to an assocated lbcd now.
+It's sufficient for user to connect just the **lbcwallet** instead of both.
+
+``` mermaid
+sequenceDiagram
+    actor C as lbcctl
+    participant W as lbcwallet (port: 9244)
+    participant D as lbcd (port: 9245)
+
+    rect rgb(200,200,200)
+    Note over C,D: lbcctl getblockcount
+    C ->>+ D: getblockcount
+    D -->>- C: response
+    end
+
+    rect rgb(200,200,200)
+    Note over C,W: lbcctl --wallet balance
+    C ->>+ W: getbalance
+    W -->>- C: response
+    end
+
+    rect rgb(200,200,200)
+    Note over C,D: lbcctl --wallet getblockcount (lbcd RPC service proxied by lbcwallet)
+    C ->>+ W: getblockcount
+    W ->>+ D: getblockcount
+    D -->>- W: response
+    W -->>- C: response
+    end
+```
+
+While **lbcd** can run standalone as a full node, **lbcwallet** requires an associated **lbcd** instance for scanning and sync'ing block data.
+
+``` mermaid
+sequenceDiagram
+    participant W as lbcwallet (RPC port: 9244)
+    participant D as lbcd (RPC port: 9245, P2P port: 9246)
+    participant D2 as other lbcd node(s) (P2P port: 9246)
+
+    rect rgb(200,200,200)
+    Note over W,D: Asynchronous websocket notifications
+    W ->> D: subscribe to notifications
+    D -->> W: notification
+    D -->> W: notification
+    end
+
+    rect rgb(200,200,200)
+    Note over W,D: lbcd RPCs
+    W ->>+ D: getblockheader
+    D ->>- W: response
+    end
+
+    rect rgb(200,200,200)
+    Note over D,D2: P2P messages over port 9246
+    D -->> D2: P2P message
+    D2 -->> D: P2P message
+    end
+
+```
+
+## Data integrity
+
+**lbcd** is not immune to data loss. It expects a clean shutdown via SIGINT or
+SIGTERM. SIGKILL, immediate VM kills, and sudden power loss can cause data
+corruption, thus requiring chain resynchronization for recovery.
+
 ## Security
 
 We take security seriously. Please contact [security](mailto:security@lbry.com) regarding any security issues.
@@ -24,97 +317,6 @@ Our PGP key is [here](https://lbry.com/faq/pgp-key) if you need it.
 We maintain a mailing list for notifications of upgrades, security issues,
 and soft/hard forks. To join, visit [fork list](https://lbry.com/forklist)
 
-## Requirements
-
-All common operating systems are supported. lbcd requires at least 8GB of RAM
-and at least 100GB of disk storage. Both RAM and disk requirements increase slowly over time.
-Using a fast NVMe disk is recommended.
-
-`lbcd` is not immune to data loss. It expects a clean shutdown via SIGINT or
-SIGTERM. SIGKILL, immediate VM kills, and sudden power loss can cause data
-corruption, thus requiring chain resynchronization for recovery.
-
-For compilation, [Go](http://golang.org) 1.16 or newer is required.
-
-## Installation
-
-Acquire binary files from [releases](https://github.com/lbryio/lbcd/releases)
-
-### To build from Source on Linux/BSD/MacOSX/POSIX
-
-Install Go according to its [installation instructions](http://golang.org/doc/install).
-
-``` sh
-git clone https://github.com/lbryio/lbcd
-cd lbcd
-
-# Build lbcd
-go build .
-
-# Build lbcctl
-go build ./cmd/lbcctl
-```
-
-Both [GoLand](https://www.jetbrains.com/go/)
-and [VS Code](https://code.visualstudio.com/docs/languages/go) IDEs are supported.
-
-## Usage
-
-By default, data and logs are stored in `<LBCDDIR>`:
-
-- Linux: `~/.lbcd/`
-- MacOS: `/Users/<username>/Library/Application Support/Lbcd/`
-
-To enable RPC access a username and password is required. Example:
-
-``` sh
-./lbcd --rpcuser=rpcuser --rpcpass=rpcpass
-```
-
-Interact with lbcd via RPC using `lbcctl`
-
-``` sh
-./lbcctl --rpcuser=rpcuser --rpcpass=rpcpass getblockcount
-./lbcctl --rpcuser=rpcuser --rpcpass=rpcpass getblocktemplate
-```
-
-By default, the RPCs are served over TLS. `lbcd` generates (if not exists) `rpc.cert` and
-`rpc.key` under `<LBCDDIR>` where `lbcctl` would search and use them.
-
-The RPCs can also be served without TLS *(on localhost only)* using (`--notls`)
-
-``` sh
-./lbcd --rpcuser=rpcuser --rpcpass=rpcpass --notls
-./lbcctl --rpcuser=rpcuser --rpcpass=rpcpass --notls getblockcount
-```
-
-## Working with Different Networks
-
-By default, `lbcd` and `lbcctl` use the following ports for different networks respectively:
-
-| Network | RPC Port | Network Port |
-| ------- | -------- | ------------ |
-| mainnet | 9245     | 9246         |
-| testnet | 19245    | 19246        |
-| regtest | 29245    | 29246        |
-
-Running `lbcd` and `lbcctl` with `--testnet` or `--regtest` would use different chain params as well as default RPC and Network ports.
-
-``` sh
-./lbcd --rpcuser=rpcuser --rpcpass=rpcpass --regtest
-./lbcctl --rpcuser=rpcuser --rpcpass=rpcpass --regtest getblockcount
-```
-
-The default Network and RPC ports of `lbcd` can be overriden using `--listen` and `--rpclisten`
-`lbcctl` can also connect to RPC server specified by `--rpcserver`
-
-``` sh
-./lbcd --rpcuser=rpcuser --rpcpass=rpcpass --regtest --listen=127.0.0.1:29248 --rpclisten=127.0.0.1:29247
-./lbcctl --rpcuser=rpcuser --rpcpass=rpcpass --regtest --rpcserver=127.0.0.1:29247 getblockcount
-```
-
-Note: Wallet related RPCs are provided by [lbcwallet](https://github.com/lbryio/lbcwallet).
-
 ## Contributing
 
 Contributions to this project are welcome, encouraged, and compensated.

addrmgr/doc.go

@@ -5,7 +5,7 @@
 /*
 Package addrmgr implements concurrency safe Bitcoin address manager.
 
-Address Manager Overview
+# Address Manager Overview
 
 In order maintain the peer-to-peer Bitcoin network, there needs to be a source
 of addresses to connect to as nodes come and go.  The Bitcoin protocol provides

blockchain/chain.go

@@ -8,6 +8,7 @@ package blockchain
 import (
 	"container/list"
 	"fmt"
+	"math/big"
 	"sync"
 	"time"
 
@@ -36,8 +37,9 @@ const (
 // from the block being located.
 //
 // For example, assume a block chain with a side chain as depicted below:
-// 	genesis -> 1 -> 2 -> ... -> 15 -> 16  -> 17  -> 18
-// 	                              \-> 16a -> 17a
+//
+//	genesis -> 1 -> 2 -> ... -> 15 -> 16  -> 17  -> 18
+//	                              \-> 16a -> 17a
 //
 // The block locator for block 17a would be the hashes of blocks:
 // [17a 16a 15 14 13 12 11 10 9 8 7 6 4 genesis]
@@ -487,7 +489,7 @@ func (b *BlockChain) calcSequenceLock(node *blockNode, tx *btcutil.Tx, utxoView
 // LockTimeToSequence converts the passed relative locktime to a sequence
 // number in accordance to BIP-68.
 // See: https://github.com/bitcoin/bips/blob/master/bip-0068.mediawiki
-//  * (Compatibility)
+//   - (Compatibility)
 func LockTimeToSequence(isSeconds bool, locktime uint32) uint32 {
 	// If we're expressing the relative lock time in blocks, then the
 	// corresponding sequence number is simply the desired input age.
@@ -1106,8 +1108,8 @@ func (b *BlockChain) reorganizeChain(detachNodes, attachNodes *list.List) error
 // a reorganization to become the main chain).
 //
 // The flags modify the behavior of this function as follows:
-//  - BFFastAdd: Avoids several expensive transaction validation operations.
-//    This is useful when using checkpoints.
+//   - BFFastAdd: Avoids several expensive transaction validation operations.
+//     This is useful when using checkpoints.
 //
 // This function MUST be called with the chain state lock held (for writes).
 func (b *BlockChain) connectBestChain(node *blockNode, block *btcutil.Block, flags BehaviorFlags) (bool, error) {
@@ -1248,8 +1250,8 @@ func (b *BlockChain) connectBestChain(node *blockNode, block *btcutil.Block, fla
 // isCurrent returns whether or not the chain believes it is current.  Several
 // factors are used to guess, but the key factors that allow the chain to
 // believe it is current are:
-//  - Latest block height is after the latest checkpoint (if enabled)
-//  - Latest block has a timestamp newer than ~6 hours ago (as LBRY block time is one fourth of bitcoin)
+//   - Latest block height is after the latest checkpoint (if enabled)
+//   - Latest block has a timestamp newer than ~6 hours ago (as LBRY block time is one fourth of bitcoin)
 //
 // This function MUST be called with the chain state lock held (for reads).
 func (b *BlockChain) isCurrent() bool {
@@ -1272,8 +1274,8 @@ func (b *BlockChain) isCurrent() bool {
 // IsCurrent returns whether or not the chain believes it is current.  Several
 // factors are used to guess, but the key factors that allow the chain to
 // believe it is current are:
-//  - Latest block height is after the latest checkpoint (if enabled)
-//  - Latest block has a timestamp newer than 24 hours ago
+//   - Latest block height is after the latest checkpoint (if enabled)
+//   - Latest block has a timestamp newer than 24 hours ago
 //
 // This function is safe for concurrent access.
 func (b *BlockChain) IsCurrent() bool {
@@ -1373,6 +1375,57 @@ func (b *BlockChain) BlockHashByHeight(blockHeight int32) (*chainhash.Hash, erro
 	return &node.hash, nil
 }
 
+// BlockAttributes desribes a Block in relation to others on the main chain.
+type BlockAttributes struct {
+	Height        int32
+	Confirmations int32
+	MedianTime    time.Time
+	ChainWork     *big.Int
+	PrevHash      *chainhash.Hash
+	NextHash      *chainhash.Hash
+}
+
+// BlockAttributesByHash returns BlockAttributes for the block with the given hash
+// relative to other blocks in the main chain. A BestState snapshot describing
+// the main chain is also returned for convenience.
+//
+// This function is safe for concurrent access.
+func (b *BlockChain) BlockAttributesByHash(hash *chainhash.Hash, prevHash *chainhash.Hash) (
+	attrs *BlockAttributes, best *BestState, err error) {
+	best = b.BestSnapshot()
+	node := b.index.LookupNode(hash)
+	if node == nil {
+		str := fmt.Sprintf("block %s not found", hash)
+		return nil, best, errNotInMainChain(str)
+	}
+
+	attrs = &BlockAttributes{
+		Height:        node.height,
+		Confirmations: 1 + best.Height - node.height,
+		MedianTime:    node.CalcPastMedianTime(),
+		ChainWork:     node.workSum,
+	}
+	if !b.bestChain.Contains(node) {
+		attrs.Confirmations = -1
+	}
+
+	// Populate prev block hash if there is one.
+	if node.height > 0 {
+		attrs.PrevHash = prevHash
+	}
+
+	// Populate next block hash if there is one.
+	if node.height < best.Height {
+		nextHash, err := b.BlockHashByHeight(node.height + 1)
+		if err != nil {
+			return nil, best, err
+		}
+		attrs.NextHash = nextHash
+	}
+
+	return attrs, best, nil
+}
+
 // HeightRange returns a range of block hashes for the given start and end
 // heights.  It is inclusive of the start height and exclusive of the end
 // height.  The end height will be limited to the current main chain height.
@@ -1508,11 +1561,11 @@ func (b *BlockChain) IntervalBlockHashes(endHash *chainhash.Hash, interval int,
 //
 // In addition, there are two special cases:
 //
-// - When no locators are provided, the stop hash is treated as a request for
-//   that block, so it will either return the node associated with the stop hash
-//   if it is known, or nil if it is unknown
-// - When locators are provided, but none of them are known, nodes starting
-//   after the genesis block will be returned
+//   - When no locators are provided, the stop hash is treated as a request for
+//     that block, so it will either return the node associated with the stop hash
+//     if it is known, or nil if it is unknown
+//   - When locators are provided, but none of them are known, nodes starting
+//     after the genesis block will be returned
 //
 // This is primarily a helper function for the locateBlocks and locateHeaders
 // functions.
@@ -1596,11 +1649,11 @@ func (b *BlockChain) locateBlocks(locator BlockLocator, hashStop *chainhash.Hash
 //
 // In addition, there are two special cases:
 //
-// - When no locators are provided, the stop hash is treated as a request for
-//   that block, so it will either return the stop hash itself if it is known,
-//   or nil if it is unknown
-// - When locators are provided, but none of them are known, hashes starting
-//   after the genesis block will be returned
+//   - When no locators are provided, the stop hash is treated as a request for
+//     that block, so it will either return the stop hash itself if it is known,
+//     or nil if it is unknown
+//   - When locators are provided, but none of them are known, hashes starting
+//     after the genesis block will be returned
 //
 // This function is safe for concurrent access.
 func (b *BlockChain) LocateBlocks(locator BlockLocator, hashStop *chainhash.Hash, maxHashes uint32) []chainhash.Hash {
@@ -1641,11 +1694,11 @@ func (b *BlockChain) locateHeaders(locator BlockLocator, hashStop *chainhash.Has
 //
 // In addition, there are two special cases:
 //
-// - When no locators are provided, the stop hash is treated as a request for
-//   that header, so it will either return the header for the stop hash itself
-//   if it is known, or nil if it is unknown
-// - When locators are provided, but none of them are known, headers starting
-//   after the genesis block will be returned
+//   - When no locators are provided, the stop hash is treated as a request for
+//     that header, so it will either return the header for the stop hash itself
+//     if it is known, or nil if it is unknown
+//   - When locators are provided, but none of them are known, headers starting
+//     after the genesis block will be returned
 //
 // This function is safe for concurrent access.
 func (b *BlockChain) LocateHeaders(locator BlockLocator, hashStop *chainhash.Hash) []wire.BlockHeader {

blockchain/chainview.go

@@ -36,11 +36,13 @@ func fastLog2Floor(n uint32) uint8 {
 // for comparing chains.
 //
 // For example, assume a block chain with a side chain as depicted below:
-//   genesis -> 1 -> 2 -> 3 -> 4  -> 5 ->  6  -> 7  -> 8
-//                         \-> 4a -> 5a -> 6a
+//
+//	genesis -> 1 -> 2 -> 3 -> 4  -> 5 ->  6  -> 7  -> 8
+//	                      \-> 4a -> 5a -> 6a
 //
 // The chain view for the branch ending in 6a consists of:
-//   genesis -> 1 -> 2 -> 3 -> 4a -> 5a -> 6a
+//
+//	genesis -> 1 -> 2 -> 3 -> 4a -> 5a -> 6a
 type chainView struct {
 	mtx   sync.Mutex
 	nodes []*blockNode
@@ -258,12 +260,14 @@ func (c *chainView) next(node *blockNode) *blockNode {
 // view.
 //
 // For example, assume a block chain with a side chain as depicted below:
-//   genesis -> 1 -> 2 -> 3 -> 4  -> 5 ->  6  -> 7  -> 8
-//                         \-> 4a -> 5a -> 6a
+//
+//	genesis -> 1 -> 2 -> 3 -> 4  -> 5 ->  6  -> 7  -> 8
+//	                      \-> 4a -> 5a -> 6a
 //
 // Further, assume the view is for the longer chain depicted above.  That is to
 // say it consists of:
-//   genesis -> 1 -> 2 -> 3 -> 4 -> 5 -> 6 -> 7 -> 8
+//
+//	genesis -> 1 -> 2 -> 3 -> 4 -> 5 -> 6 -> 7 -> 8
 //
 // Invoking this function with block node 5 would return block node 6 while
 // invoking it with block node 5a would return nil since that node is not part
@@ -321,12 +325,14 @@ func (c *chainView) findFork(node *blockNode) *blockNode {
 // the chain view.  It will return nil if there is no common block.
 //
 // For example, assume a block chain with a side chain as depicted below:
-//   genesis -> 1 -> 2 -> ... -> 5 -> 6  -> 7  -> 8
-//                                \-> 6a -> 7a
+//
+//	genesis -> 1 -> 2 -> ... -> 5 -> 6  -> 7  -> 8
+//	                             \-> 6a -> 7a
 //
 // Further, assume the view is for the longer chain depicted above.  That is to
 // say it consists of:
-//   genesis -> 1 -> 2 -> ... -> 5 -> 6 -> 7 -> 8.
+//
+//	genesis -> 1 -> 2 -> ... -> 5 -> 6 -> 7 -> 8.
 //
 // Invoking this function with block node 7a would return block node 5 while
 // invoking it with block node 7 would return itself since it is already part of

blockchain/checkpoints.go

@@ -185,14 +185,14 @@ func isNonstandardTransaction(tx *btcutil.Tx) bool {
 // checkpoint candidate.
 //
 // The factors used to determine a good checkpoint are:
-//  - The block must be in the main chain
-//  - The block must be at least 'CheckpointConfirmations' blocks prior to the
-//    current end of the main chain
-//  - The timestamps for the blocks before and after the checkpoint must have
-//    timestamps which are also before and after the checkpoint, respectively
-//    (due to the median time allowance this is not always the case)
-//  - The block must not contain any strange transaction such as those with
-//    nonstandard scripts
+//   - The block must be in the main chain
+//   - The block must be at least 'CheckpointConfirmations' blocks prior to the
+//     current end of the main chain
+//   - The timestamps for the blocks before and after the checkpoint must have
+//     timestamps which are also before and after the checkpoint, respectively
+//     (due to the median time allowance this is not always the case)
+//   - The block must not contain any strange transaction such as those with
+//     nonstandard scripts
 //
 // The intent is that candidates are reviewed by a developer to make the final
 // decision and then manually added to the list of checkpoints for a network.

blockchain/difficulty.go

@@ -42,18 +42,21 @@ func HashToBig(hash *chainhash.Hash) *big.Int {
 // Like IEEE754 floating point, there are three basic components: the sign,
 // the exponent, and the mantissa.  They are broken out as follows:
 //
-//	* the most significant 8 bits represent the unsigned base 256 exponent
-// 	* bit 23 (the 24th bit) represents the sign bit
-//	* the least significant 23 bits represent the mantissa
+//   - the most significant 8 bits represent the unsigned base 256 exponent
 //
-//	-------------------------------------------------
-//	|   Exponent     |    Sign    |    Mantissa     |
-//	-------------------------------------------------
-//	| 8 bits [31-24] | 1 bit [23] | 23 bits [22-00] |
-//	-------------------------------------------------
+//   - bit 23 (the 24th bit) represents the sign bit
+//
+//   - the least significant 23 bits represent the mantissa
+//
+//     -------------------------------------------------
+//     |   Exponent     |    Sign    |    Mantissa     |
+//     -------------------------------------------------
+//     | 8 bits [31-24] | 1 bit [23] | 23 bits [22-00] |
+//     -------------------------------------------------
 //
 // The formula to calculate N is:
-// 	N = (-1^sign) * mantissa * 256^(exponent-3)
+//
+//	N = (-1^sign) * mantissa * 256^(exponent-3)
 //
 // This compact form is only used in bitcoin to encode unsigned 256-bit numbers
 // which represent difficulty targets, thus there really is not a need for a

blockchain/doc.go

@@ -26,42 +26,42 @@ caller a high level of flexibility in how they want to react to certain events
 such as orphan blocks which need their parents requested and newly connected
 main chain blocks which might result in wallet updates.
 
-Bitcoin Chain Processing Overview
+# Bitcoin Chain Processing Overview
 
 Before a block is allowed into the block chain, it must go through an intensive
 series of validation rules.  The following list serves as a general outline of
 those rules to provide some intuition into what is going on under the hood, but
 is by no means exhaustive:
 
- - Reject duplicate blocks
- - Perform a series of sanity checks on the block and its transactions such as
-   verifying proof of work, timestamps, number and character of transactions,
-   transaction amounts, script complexity, and merkle root calculations
- - Compare the block against predetermined checkpoints for expected timestamps
-   and difficulty based on elapsed time since the checkpoint
- - Save the most recent orphan blocks for a limited time in case their parent
-   blocks become available
- - Stop processing if the block is an orphan as the rest of the processing
-   depends on the block's position within the block chain
- - Perform a series of more thorough checks that depend on the block's position
-   within the block chain such as verifying block difficulties adhere to
-   difficulty retarget rules, timestamps are after the median of the last
-   several blocks, all transactions are finalized, checkpoint blocks match, and
-   block versions are in line with the previous blocks
- - Determine how the block fits into the chain and perform different actions
-   accordingly in order to ensure any side chains which have higher difficulty
-   than the main chain become the new main chain
- - When a block is being connected to the main chain (either through
-   reorganization of a side chain to the main chain or just extending the
-   main chain), perform further checks on the block's transactions such as
-   verifying transaction duplicates, script complexity for the combination of
-   connected scripts, coinbase maturity, double spends, and connected
-   transaction values
- - Run the transaction scripts to verify the spender is allowed to spend the
-   coins
- - Insert the block into the block database
+  - Reject duplicate blocks
+  - Perform a series of sanity checks on the block and its transactions such as
+    verifying proof of work, timestamps, number and character of transactions,
+    transaction amounts, script complexity, and merkle root calculations
+  - Compare the block against predetermined checkpoints for expected timestamps
+    and difficulty based on elapsed time since the checkpoint
+  - Save the most recent orphan blocks for a limited time in case their parent
+    blocks become available
+  - Stop processing if the block is an orphan as the rest of the processing
+    depends on the block's position within the block chain
+  - Perform a series of more thorough checks that depend on the block's position
+    within the block chain such as verifying block difficulties adhere to
+    difficulty retarget rules, timestamps are after the median of the last
+    several blocks, all transactions are finalized, checkpoint blocks match, and
+    block versions are in line with the previous blocks
+  - Determine how the block fits into the chain and perform different actions
+    accordingly in order to ensure any side chains which have higher difficulty
+    than the main chain become the new main chain
+  - When a block is being connected to the main chain (either through
+    reorganization of a side chain to the main chain or just extending the
+    main chain), perform further checks on the block's transactions such as
+    verifying transaction duplicates, script complexity for the combination of
+    connected scripts, coinbase maturity, double spends, and connected
+    transaction values
+  - Run the transaction scripts to verify the spender is allowed to spend the
+    coins
+  - Insert the block into the block database
 
-Errors
+# Errors
 
 Errors returned by this package are either the raw errors provided by underlying
 calls or of type blockchain.RuleError.  This allows the caller to differentiate
@@ -70,12 +70,12 @@ violations through type assertions.  In addition, callers can programmatically
 determine the specific rule violation by examining the ErrorCode field of the
 type asserted blockchain.RuleError.
 
-Bitcoin Improvement Proposals
+# Bitcoin Improvement Proposals
 
 This package includes spec changes outlined by the following BIPs:
 
-		BIP0016 (https://en.bitcoin.it/wiki/BIP_0016)
-		BIP0030 (https://en.bitcoin.it/wiki/BIP_0030)
-		BIP0034 (https://en.bitcoin.it/wiki/BIP_0034)
+	BIP0016 (https://en.bitcoin.it/wiki/BIP_0016)
+	BIP0030 (https://en.bitcoin.it/wiki/BIP_0030)
+	BIP0034 (https://en.bitcoin.it/wiki/BIP_0034)
 */
 package blockchain

blockchain/fullblocktests/generate.go

@@ -464,9 +464,9 @@ func createSpendTxForTx(tx *wire.MsgTx, fee btcutil.Amount) *wire.MsgTx {
 // - A coinbase that pays the required subsidy to an OP_TRUE script
 // - When a spendable output is provided:
 //   - A transaction that spends from the provided output the following outputs:
-//     - One that pays the inputs amount minus 1 atom to an OP_TRUE script
-//     - One that contains an OP_RETURN output with a random uint64 in order to
-//       ensure the transaction has a unique hash
+//   - One that pays the inputs amount minus 1 atom to an OP_TRUE script
+//   - One that contains an OP_RETURN output with a random uint64 in order to
+//     ensure the transaction has a unique hash
 //
 // Additionally, if one or more munge functions are specified, they will be
 // invoked with the block prior to solving it.  This provides callers with the

blockchain/indexers/blocklogger.go

@@ -27,8 +27,9 @@ type blockProgressLogger struct {
 
 // newBlockProgressLogger returns a new block progress logger.
 // The progress message is templated as follows:
-//  {progressAction} {numProcessed} {blocks|block} in the last {timePeriod}
-//  ({numTxs}, height {lastBlockHeight}, {lastBlockTimeStamp})
+//
+//	{progressAction} {numProcessed} {blocks|block} in the last {timePeriod}
+//	({numTxs}, height {lastBlockHeight}, {lastBlockTimeStamp})
 func newBlockProgressLogger(progressMessage string, logger btclog.Logger) *blockProgressLogger {
 	return &blockProgressLogger{
 		lastBlockLogTime: time.Now(),

blockchain/merkle.go

@@ -11,6 +11,7 @@ import (
 
 	"github.com/lbryio/lbcd/chaincfg/chainhash"
 	"github.com/lbryio/lbcd/txscript"
+	"github.com/lbryio/lbcd/wire"
 	btcutil "github.com/lbryio/lbcutil"
 )
 
@@ -86,7 +87,7 @@ func HashMerkleBranches(left *chainhash.Hash, right *chainhash.Hash) *chainhash.
 //
 // The above stored as a linear array is as follows:
 //
-// 	[h1 h2 h3 h4 h12 h34 root]
+//	[h1 h2 h3 h4 h12 h34 root]
 //
 // As the above shows, the merkle root is always the last element in the array.
 //
@@ -227,6 +228,20 @@ func ValidateWitnessCommitment(blk *btcutil.Block) error {
 	// coinbase transaction MUST have exactly one witness element within
 	// its witness data and that element must be exactly
 	// CoinbaseWitnessDataLen bytes.
+	//
+	// Some popular pool software, for example yiimp, uses pre-BIP0141
+	// coinbase struture. In this case, we don't just accept it, but also
+	// turn it into post-BIP0141 format.
+	if len(coinbaseTx.MsgTx().TxIn[0].Witness) == 0 {
+		log.Infof("pre-BIP0141 coinbase transaction detected. Height: %d", blk.Height())
+
+		var witnessNonce [CoinbaseWitnessDataLen]byte
+		coinbaseTx.MsgTx().TxIn[0].Witness = wire.TxWitness{witnessNonce[:]}
+		blk.MsgBlock().Transactions[0].TxIn[0].Witness = wire.TxWitness{witnessNonce[:]}
+
+		// Clear cached serialized block.
+		blk.SetBytes(nil)
+	}
 	coinbaseWitness := coinbaseTx.MsgTx().TxIn[0].Witness
 	if len(coinbaseWitness) != 1 {
 		str := fmt.Sprintf("the coinbase transaction has %d items in "+

blockchain/notifications.go

@@ -50,9 +50,9 @@ func (n NotificationType) String() string {
 // Notification defines notification that is sent to the caller via the callback
 // function provided during the call to New and consists of a notification type
 // as well as associated data that depends on the type as follows:
-// 	- NTBlockAccepted:     *btcutil.Block
-// 	- NTBlockConnected:    *btcutil.Block
-// 	- NTBlockDisconnected: *btcutil.Block
+//   - NTBlockAccepted:     *btcutil.Block
+//   - NTBlockConnected:    *btcutil.Block
+//   - NTBlockDisconnected: *btcutil.Block
 type Notification struct {
 	Type NotificationType
 	Data interface{}

blockchain/upgrade.go

@@ -232,24 +232,25 @@ func determineMainChainBlocks(blocksMap map[chainhash.Hash]*blockChainContext, t
 //
 // The legacy format is as follows:
 //
-//   <version><height><header code><unspentness bitmap>[<compressed txouts>,...]
+//	<version><height><header code><unspentness bitmap>[<compressed txouts>,...]
 //
-//   Field                Type     Size
-//   version              VLQ      variable
-//   block height         VLQ      variable
-//   header code          VLQ      variable
-//   unspentness bitmap   []byte   variable
-//   compressed txouts
-//     compressed amount  VLQ      variable
-//     compressed script  []byte   variable
+//	Field                Type     Size
+//	version              VLQ      variable
+//	block height         VLQ      variable
+//	header code          VLQ      variable
+//	unspentness bitmap   []byte   variable
+//	compressed txouts
+//	  compressed amount  VLQ      variable
+//	  compressed script  []byte   variable
 //
 // The serialized header code format is:
-//   bit 0 - containing transaction is a coinbase
-//   bit 1 - output zero is unspent
-//   bit 2 - output one is unspent
-//   bits 3-x - number of bytes in unspentness bitmap.  When both bits 1 and 2
-//     are unset, it encodes N-1 since there must be at least one unspent
-//     output.
+//
+//	bit 0 - containing transaction is a coinbase
+//	bit 1 - output zero is unspent
+//	bit 2 - output one is unspent
+//	bits 3-x - number of bytes in unspentness bitmap.  When both bits 1 and 2
+//	  are unset, it encodes N-1 since there must be at least one unspent
+//	  output.
 //
 // The rationale for the header code scheme is as follows:
 //   - Transactions which only pay to a single output and a change output are
@@ -269,65 +270,65 @@ func determineMainChainBlocks(blocksMap map[chainhash.Hash]*blockChainContext, t
 // From tx in main blockchain:
 // Blk 1, 0e3e2357e806b6cdb1f70b54c3a3a17b6714ee1f0e68bebb44a74b1efd512098
 //
-//    010103320496b538e853519c726a2c91e61ec11600ae1390813a627c66fb8be7947be63c52
-//    <><><><------------------------------------------------------------------>
-//     | | \--------\                               |
-//     | height     |                      compressed txout 0
-//  version    header code
+//	  010103320496b538e853519c726a2c91e61ec11600ae1390813a627c66fb8be7947be63c52
+//	  <><><><------------------------------------------------------------------>
+//	   | | \--------\                               |
+//	   | height     |                      compressed txout 0
+//	version    header code
 //
-//  - version: 1
-//  - height: 1
-//  - header code: 0x03 (coinbase, output zero unspent, 0 bytes of unspentness)
-//  - unspentness: Nothing since it is zero bytes
-//  - compressed txout 0:
-//    - 0x32: VLQ-encoded compressed amount for 5000000000 (50 BTC)
-//    - 0x04: special script type pay-to-pubkey
-//    - 0x96...52: x-coordinate of the pubkey
+//	- version: 1
+//	- height: 1
+//	- header code: 0x03 (coinbase, output zero unspent, 0 bytes of unspentness)
+//	- unspentness: Nothing since it is zero bytes
+//	- compressed txout 0:
+//	  - 0x32: VLQ-encoded compressed amount for 5000000000 (50 BTC)
+//	  - 0x04: special script type pay-to-pubkey
+//	  - 0x96...52: x-coordinate of the pubkey
 //
 // Example 2:
 // From tx in main blockchain:
 // Blk 113931, 4a16969aa4764dd7507fc1de7f0baa4850a246de90c45e59a3207f9a26b5036f
 //
-//    0185f90b0a011200e2ccd6ec7c6e2e581349c77e067385fa8236bf8a800900b8025be1b3efc63b0ad48e7f9f10e87544528d58
-//    <><----><><><------------------------------------------><-------------------------------------------->
-//     |    |  | \-------------------\            |                            |
-//  version |  \--------\       unspentness       |                    compressed txout 2
-//        height     header code          compressed txout 0
+//	  0185f90b0a011200e2ccd6ec7c6e2e581349c77e067385fa8236bf8a800900b8025be1b3efc63b0ad48e7f9f10e87544528d58
+//	  <><----><><><------------------------------------------><-------------------------------------------->
+//	   |    |  | \-------------------\            |                            |
+//	version |  \--------\       unspentness       |                    compressed txout 2
+//	      height     header code          compressed txout 0
 //
-//  - version: 1
-//  - height: 113931
-//  - header code: 0x0a (output zero unspent, 1 byte in unspentness bitmap)
-//  - unspentness: [0x01] (bit 0 is set, so output 0+2 = 2 is unspent)
-//    NOTE: It's +2 since the first two outputs are encoded in the header code
-//  - compressed txout 0:
-//    - 0x12: VLQ-encoded compressed amount for 20000000 (0.2 BTC)
-//    - 0x00: special script type pay-to-pubkey-hash
-//    - 0xe2...8a: pubkey hash
-//  - compressed txout 2:
-//    - 0x8009: VLQ-encoded compressed amount for 15000000 (0.15 BTC)
-//    - 0x00: special script type pay-to-pubkey-hash
-//    - 0xb8...58: pubkey hash
+//	- version: 1
+//	- height: 113931
+//	- header code: 0x0a (output zero unspent, 1 byte in unspentness bitmap)
+//	- unspentness: [0x01] (bit 0 is set, so output 0+2 = 2 is unspent)
+//	  NOTE: It's +2 since the first two outputs are encoded in the header code
+//	- compressed txout 0:
+//	  - 0x12: VLQ-encoded compressed amount for 20000000 (0.2 BTC)
+//	  - 0x00: special script type pay-to-pubkey-hash
+//	  - 0xe2...8a: pubkey hash
+//	- compressed txout 2:
+//	  - 0x8009: VLQ-encoded compressed amount for 15000000 (0.15 BTC)
+//	  - 0x00: special script type pay-to-pubkey-hash
+//	  - 0xb8...58: pubkey hash
 //
 // Example 3:
 // From tx in main blockchain:
 // Blk 338156, 1b02d1c8cfef60a189017b9a420c682cf4a0028175f2f563209e4ff61c8c3620
 //
-//    0193d06c100000108ba5b9e763011dd46a006572d820e448e12d2bbb38640bc718e6
-//    <><----><><----><-------------------------------------------------->
-//     |    |  |   \-----------------\            |
-//  version |  \--------\       unspentness       |
-//        height     header code          compressed txout 22
+//	  0193d06c100000108ba5b9e763011dd46a006572d820e448e12d2bbb38640bc718e6
+//	  <><----><><----><-------------------------------------------------->
+//	   |    |  |   \-----------------\            |
+//	version |  \--------\       unspentness       |
+//	      height     header code          compressed txout 22
 //
-//  - version: 1
-//  - height: 338156
-//  - header code: 0x10 (2+1 = 3 bytes in unspentness bitmap)
-//    NOTE: It's +1 since neither bit 1 nor 2 are set, so N-1 is encoded.
-//  - unspentness: [0x00 0x00 0x10] (bit 20 is set, so output 20+2 = 22 is unspent)
-//    NOTE: It's +2 since the first two outputs are encoded in the header code
-//  - compressed txout 22:
-//    - 0x8ba5b9e763: VLQ-encoded compressed amount for 366875659 (3.66875659 BTC)
-//    - 0x01: special script type pay-to-script-hash
-//    - 0x1d...e6: script hash
+//	- version: 1
+//	- height: 338156
+//	- header code: 0x10 (2+1 = 3 bytes in unspentness bitmap)
+//	  NOTE: It's +1 since neither bit 1 nor 2 are set, so N-1 is encoded.
+//	- unspentness: [0x00 0x00 0x10] (bit 20 is set, so output 20+2 = 22 is unspent)
+//	  NOTE: It's +2 since the first two outputs are encoded in the header code
+//	- compressed txout 22:
+//	  - 0x8ba5b9e763: VLQ-encoded compressed amount for 366875659 (3.66875659 BTC)
+//	  - 0x01: special script type pay-to-script-hash
+//	  - 0x1d...e6: script hash
 func deserializeUtxoEntryV0(serialized []byte) (map[uint32]*UtxoEntry, error) {
 	// Deserialize the version.
 	//

blockchain/validate.go

@@ -334,8 +334,8 @@ func CheckTransactionSanity(tx *btcutil.Tx, enforceSoftFork bool) error {
 // target difficulty as claimed.
 //
 // The flags modify the behavior of this function as follows:
-//  - BFNoPoWCheck: The check to ensure the block hash is less than the target
-//    difficulty is not performed.
+//   - BFNoPoWCheck: The check to ensure the block hash is less than the target
+//     difficulty is not performed.
 func checkProofOfWork(header *wire.BlockHeader, powLimit *big.Int, flags BehaviorFlags) error {
 	// The target difficulty must be larger than zero.
 	target := CompactToBig(header.Bits)
@@ -669,8 +669,8 @@ func checkSerializedHeight(coinbaseTx *btcutil.Tx, wantHeight int32) error {
 // which depend on its position within the block chain.
 //
 // The flags modify the behavior of this function as follows:
-//  - BFFastAdd: All checks except those involving comparing the header against
-//    the checkpoints are not performed.
+//   - BFFastAdd: All checks except those involving comparing the header against
+//     the checkpoints are not performed.
 //
 // This function MUST be called with the chain state lock held (for writes).
 func (b *BlockChain) checkBlockHeaderContext(header *wire.BlockHeader, prevNode *blockNode, flags BehaviorFlags) error {
@@ -748,8 +748,8 @@ func (b *BlockChain) checkBlockHeaderContext(header *wire.BlockHeader, prevNode
 // on its position within the block chain.
 //
 // The flags modify the behavior of this function as follows:
-//  - BFFastAdd: The transaction are not checked to see if they are finalized
-//    and the somewhat expensive BIP0034 validation is not performed.
+//   - BFFastAdd: The transaction are not checked to see if they are finalized
+//     and the somewhat expensive BIP0034 validation is not performed.
 //
 // The flags are also passed to checkBlockHeaderContext.  See its documentation
 // for how the flags modify its behavior.

btcec/btcec_test.go

@@ -527,7 +527,7 @@ type baseMultTest struct {
 	x, y string
 }
 
-//TODO: add more test vectors
+// TODO: add more test vectors
 var s256BaseMultTests = []baseMultTest{
 	{
 		"AA5E28D6A97A2479A65527F7290311A3624D4CC0FA1578598EE3C2613BF99522",
@@ -556,7 +556,7 @@ var s256BaseMultTests = []baseMultTest{
 	},
 }
 
-//TODO: test different curves as well?
+// TODO: test different curves as well?
 func TestBaseMult(t *testing.T) {
 	s256 := S256()
 	for i, e := range s256BaseMultTests {

btcec/field.go

@@ -125,27 +125,30 @@ var (
 // the arithmetic needed for elliptic curve operations.
 //
 // The following depicts the internal representation:
-// 	 -----------------------------------------------------------------
-// 	|        n[9]       |        n[8]       | ... |        n[0]       |
-// 	| 32 bits available | 32 bits available | ... | 32 bits available |
-// 	| 22 bits for value | 26 bits for value | ... | 26 bits for value |
-// 	| 10 bits overflow  |  6 bits overflow  | ... |  6 bits overflow  |
-// 	| Mult: 2^(26*9)    | Mult: 2^(26*8)    | ... | Mult: 2^(26*0)    |
-// 	 -----------------------------------------------------------------
+//
+//	 -----------------------------------------------------------------
+//	|        n[9]       |        n[8]       | ... |        n[0]       |
+//	| 32 bits available | 32 bits available | ... | 32 bits available |
+//	| 22 bits for value | 26 bits for value | ... | 26 bits for value |
+//	| 10 bits overflow  |  6 bits overflow  | ... |  6 bits overflow  |
+//	| Mult: 2^(26*9)    | Mult: 2^(26*8)    | ... | Mult: 2^(26*0)    |
+//	 -----------------------------------------------------------------
 //
 // For example, consider the number 2^49 + 1.  It would be represented as:
-// 	n[0] = 1
-// 	n[1] = 2^23
-// 	n[2..9] = 0
+//
+//	n[0] = 1
+//	n[1] = 2^23
+//	n[2..9] = 0
 //
 // The full 256-bit value is then calculated by looping i from 9..0 and
 // doing sum(n[i] * 2^(26i)) like so:
-// 	n[9] * 2^(26*9) = 0    * 2^234 = 0
-// 	n[8] * 2^(26*8) = 0    * 2^208 = 0
-// 	...
-// 	n[1] * 2^(26*1) = 2^23 * 2^26  = 2^49
-// 	n[0] * 2^(26*0) = 1    * 2^0   = 1
-// 	Sum: 0 + 0 + ... + 2^49 + 1 = 2^49 + 1
+//
+//	n[9] * 2^(26*9) = 0    * 2^234 = 0
+//	n[8] * 2^(26*8) = 0    * 2^208 = 0
+//	...
+//	n[1] * 2^(26*1) = 2^23 * 2^26  = 2^49
+//	n[0] * 2^(26*0) = 1    * 2^0   = 1
+//	Sum: 0 + 0 + ... + 2^49 + 1 = 2^49 + 1
 type fieldVal struct {
 	n [10]uint32
 }

btcjson/chainsvrcmds.go

@@ -48,6 +48,15 @@ func NewAddNodeCmd(addr string, subCmd AddNodeSubCmd) *AddNodeCmd {
 	}
 }
 
+// ClearBannedCmd defines the clearbanned JSON-RPC command.
+type ClearBannedCmd struct{}
+
+// NewClearBannedCmd returns a new instance which can be used to issue an clearbanned
+// JSON-RPC command.
+func NewClearBannedCmd() *ClearBannedCmd {
+	return &ClearBannedCmd{}
+}
+
 // TransactionInput represents the inputs to a transaction.  Specifically a
 // transaction hash and output number pair.
 type TransactionInput struct {
@@ -58,7 +67,7 @@ type TransactionInput struct {
 // CreateRawTransactionCmd defines the createrawtransaction JSON-RPC command.
 type CreateRawTransactionCmd struct {
 	Inputs   []TransactionInput
-	Amounts  map[string]float64 `jsonrpcusage:"{\"address\":amount,...}"` // In BTC
+	Outputs  map[string]interface{} `jsonrpcusage:"{\"address\":amount, \"data\":\"hex\", ...}"`
 	LockTime *int64
 }
 
@@ -67,7 +76,7 @@ type CreateRawTransactionCmd struct {
 //
 // Amounts are in BTC. Passing in nil and the empty slice as inputs is equivalent,
 // both gets interpreted as the empty slice.
-func NewCreateRawTransactionCmd(inputs []TransactionInput, amounts map[string]float64,
+func NewCreateRawTransactionCmd(inputs []TransactionInput, outputs map[string]interface{},
 	lockTime *int64) *CreateRawTransactionCmd {
 	// to make sure we're serializing this to the empty list and not null, we
 	// explicitly initialize the list
@@ -76,7 +85,7 @@ func NewCreateRawTransactionCmd(inputs []TransactionInput, amounts map[string]fl
 	}
 	return &CreateRawTransactionCmd{
 		Inputs:   inputs,
-		Amounts:  amounts,
+		Outputs:  outputs,
 		LockTime: lockTime,
 	}
 }
@@ -757,6 +766,15 @@ func NewInvalidateBlockCmd(blockHash string) *InvalidateBlockCmd {
 	}
 }
 
+// ListBannedCmd defines the listbanned JSON-RPC command.
+type ListBannedCmd struct{}
+
+// NewListBannedCmd returns a new instance which can be used to issue a listbanned
+// JSON-RPC command.
+func NewListBannedCmd() *ListBannedCmd {
+	return &ListBannedCmd{}
+}
+
 // PingCmd defines the ping JSON-RPC command.
 type PingCmd struct{}
 
@@ -903,6 +921,39 @@ func NewBitcoindSendRawTransactionCmd(hexTx string, maxFeeRate int32) *SendRawTr
 	}
 }
 
+// SetBanSubCmd defines the type used in the setban JSON-RPC command for the
+// sub command field.
+type SetBanSubCmd string
+
+const (
+	// SBAdd indicates the specified host should be added as a persistent
+	// peer.
+	SBAdd SetBanSubCmd = "add"
+
+	// SBRemove indicates the specified peer should be removed.
+	SBRemove SetBanSubCmd = "remove"
+)
+
+// SetBanCmd defines the setban JSON-RPC command.
+type SetBanCmd struct {
+	Addr     string
+	SubCmd   SetBanSubCmd `jsonrpcusage:"\"add|remove\""`
+	BanTime  *int         `jsonrpcdefault:"0"`
+	Absolute *bool        `jsonrpcdefault:"false"`
+}
+
+// NewSetBanCmd returns a new instance which can be used to issue an setban
+// JSON-RPC command.
+func NewSetBanCmd(addr string, subCmd SetBanSubCmd, banTime *int,
+	absolute *bool) *SetBanCmd {
+	return &SetBanCmd{
+		Addr:     addr,
+		SubCmd:   subCmd,
+		BanTime:  banTime,
+		Absolute: absolute,
+	}
+}
+
 // SetGenerateCmd defines the setgenerate JSON-RPC command.
 type SetGenerateCmd struct {
 	Generate     bool
@@ -1080,6 +1131,9 @@ func init() {
 	MustRegisterCmd("getnetworkhashps", (*GetNetworkHashPSCmd)(nil), flags)
 	MustRegisterCmd("getnodeaddresses", (*GetNodeAddressesCmd)(nil), flags)
 	MustRegisterCmd("getpeerinfo", (*GetPeerInfoCmd)(nil), flags)
+	MustRegisterCmd("listbanned", (*ListBannedCmd)(nil), flags)
+	MustRegisterCmd("setban", (*SetBanCmd)(nil), flags)
+	MustRegisterCmd("clearbanned", (*ClearBannedCmd)(nil), flags)
 	MustRegisterCmd("getrawmempool", (*GetRawMempoolCmd)(nil), flags)
 	MustRegisterCmd("getrawtransaction", (*GetRawTransactionCmd)(nil), flags)
 	MustRegisterCmd("gettxout", (*GetTxOutCmd)(nil), flags)

btcjson/chainsvrcmds_test.go

@@ -52,13 +52,13 @@ func TestChainSvrCmds(t *testing.T) {
 				txInputs := []btcjson.TransactionInput{
 					{Txid: "123", Vout: 1},
 				}
-				amounts := map[string]float64{"456": .0123}
-				return btcjson.NewCreateRawTransactionCmd(txInputs, amounts, nil)
+				txOutputs := map[string]interface{}{"456": .0123}
+				return btcjson.NewCreateRawTransactionCmd(txInputs, txOutputs, nil)
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"createrawtransaction","params":[[{"txid":"123","vout":1}],{"456":0.0123}],"id":1}`,
 			unmarshalled: &btcjson.CreateRawTransactionCmd{
 				Inputs:  []btcjson.TransactionInput{{Txid: "123", Vout: 1}},
-				Amounts: map[string]float64{"456": .0123},
+				Outputs: map[string]interface{}{"456": .0123},
 			},
 		},
 		{
@@ -67,13 +67,13 @@ func TestChainSvrCmds(t *testing.T) {
 				return btcjson.NewCmd("createrawtransaction", `[]`, `{"456":0.0123}`)
 			},
 			staticCmd: func() interface{} {
-				amounts := map[string]float64{"456": .0123}
-				return btcjson.NewCreateRawTransactionCmd(nil, amounts, nil)
+				txOutputs := map[string]interface{}{"456": .0123}
+				return btcjson.NewCreateRawTransactionCmd(nil, txOutputs, nil)
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"createrawtransaction","params":[[],{"456":0.0123}],"id":1}`,
 			unmarshalled: &btcjson.CreateRawTransactionCmd{
 				Inputs:  []btcjson.TransactionInput{},
-				Amounts: map[string]float64{"456": .0123},
+				Outputs: map[string]interface{}{"456": .0123},
 			},
 		},
 		{
@@ -86,16 +86,35 @@ func TestChainSvrCmds(t *testing.T) {
 				txInputs := []btcjson.TransactionInput{
 					{Txid: "123", Vout: 1},
 				}
-				amounts := map[string]float64{"456": .0123}
-				return btcjson.NewCreateRawTransactionCmd(txInputs, amounts, btcjson.Int64(12312333333))
+				txOutputs := map[string]interface{}{"456": .0123}
+				return btcjson.NewCreateRawTransactionCmd(txInputs, txOutputs, btcjson.Int64(12312333333))
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"createrawtransaction","params":[[{"txid":"123","vout":1}],{"456":0.0123},12312333333],"id":1}`,
 			unmarshalled: &btcjson.CreateRawTransactionCmd{
 				Inputs:   []btcjson.TransactionInput{{Txid: "123", Vout: 1}},
-				Amounts:  map[string]float64{"456": .0123},
+				Outputs:  map[string]interface{}{"456": .0123},
 				LockTime: btcjson.Int64(12312333333),
 			},
 		},
+		{
+			name: "createrawtransaction with data",
+			newCmd: func() (interface{}, error) {
+				return btcjson.NewCmd("createrawtransaction", `[{"txid":"123","vout":1}]`,
+					`{"data":"6a134920616d204672616374616c456e6372797074"}`)
+			},
+			staticCmd: func() interface{} {
+				txInputs := []btcjson.TransactionInput{
+					{Txid: "123", Vout: 1},
+				}
+				txOutputs := map[string]interface{}{"data": "6a134920616d204672616374616c456e6372797074"}
+				return btcjson.NewCreateRawTransactionCmd(txInputs, txOutputs, nil)
+			},
+			marshalled: `{"jsonrpc":"1.0","method":"createrawtransaction","params":[[{"txid":"123","vout":1}],{"data":"6a134920616d204672616374616c456e6372797074"}],"id":1}`,
+			unmarshalled: &btcjson.CreateRawTransactionCmd{
+				Inputs:  []btcjson.TransactionInput{{Txid: "123", Vout: 1}},
+				Outputs: map[string]interface{}{"data": "6a134920616d204672616374616c456e6372797074"},
+			},
+		},
 		{
 			name: "fundrawtransaction - empty opts",
 			newCmd: func() (i interface{}, e error) {

btcjson/chainsvrresults.go

@@ -35,35 +35,37 @@ type GetBlockHeaderVerboseResult struct {
 }
 
 // GetBlockStatsResult models the data from the getblockstats command.
+// Pointers are used instead of values to allow for optional fields.
 type GetBlockStatsResult struct {
-	AverageFee         int64   `json:"avgfee"`
-	AverageFeeRate     int64   `json:"avgfeerate"`
-	AverageTxSize      int64   `json:"avgtxsize"`
-	FeeratePercentiles []int64 `json:"feerate_percentiles"`
-	Hash               string  `json:"blockhash"`
-	Height             int64   `json:"height"`
-	Ins                int64   `json:"ins"`
-	MaxFee             int64   `json:"maxfee"`
-	MaxFeeRate         int64   `json:"maxfeerate"`
-	MaxTxSize          int64   `json:"maxtxsize"`
-	MedianFee          int64   `json:"medianfee"`
-	MedianTime         int64   `json:"mediantime"`
-	MedianTxSize       int64   `json:"mediantxsize"`
-	MinFee             int64   `json:"minfee"`
-	MinFeeRate         int64   `json:"minfeerate"`
-	MinTxSize          int64   `json:"mintxsize"`
-	Outs               int64   `json:"outs"`
-	SegWitTotalSize    int64   `json:"swtotal_size"`
-	SegWitTotalWeight  int64   `json:"swtotal_weight"`
-	SegWitTxs          int64   `json:"swtxs"`
-	Subsidy            int64   `json:"subsidy"`
-	Time               int64   `json:"time"`
-	TotalOut           int64   `json:"total_out"`
-	TotalSize          int64   `json:"total_size"`
-	TotalWeight        int64   `json:"total_weight"`
-	Txs                int64   `json:"txs"`
-	UTXOIncrease       int64   `json:"utxo_increase"`
-	UTXOSizeIncrease   int64   `json:"utxo_size_inc"`
+	AverageFee         *int64   `json:"avgfee,omitempty"`
+	AverageFeeRate     *int64   `json:"avgfeerate,omitempty"`
+	AverageTxSize      *int64   `json:"avgtxsize,omitempty"`
+	FeeratePercentiles *[]int64 `json:"feerate_percentiles,omitempty"`
+	Hash               *string  `json:"blockhash,omitempty"`
+	Height             *int64   `json:"height,omitempty"`
+	Ins                *int64   `json:"ins,omitempty"`
+	MaxFee             *int64   `json:"maxfee,omitempty"`
+	MaxFeeRate         *int64   `json:"maxfeerate,omitempty"`
+	MaxTxSize          *int64   `json:"maxtxsize,omitempty"`
+	MedianFee          *int64   `json:"medianfee,omitempty"`
+	MedianTime         *int64   `json:"mediantime,omitempty"`
+	MedianTxSize       *int64   `json:"mediantxsize,omitempty"`
+	MinFee             *int64   `json:"minfee,omitempty"`
+	MinFeeRate         *int64   `json:"minfeerate,omitempty"`
+	MinTxSize          *int64   `json:"mintxsize,omitempty"`
+	Outs               *int64   `json:"outs,omitempty"`
+	SegWitTotalSize    *int64   `json:"swtotal_size,omitempty"`
+	SegWitTotalWeight  *int64   `json:"swtotal_weight,omitempty"`
+	SegWitTxs          *int64   `json:"swtxs,omitempty"`
+	Subsidy            *int64   `json:"subsidy,omitempty"`
+	Time               *int64   `json:"time,omitempty"`
+	TotalOut           *int64   `json:"total_out,omitempty"`
+	TotalSize          *int64   `json:"total_size,omitempty"`
+	TotalWeight        *int64   `json:"total_weight,omitempty"`
+	TotalFee           *int64   `json:"totalfee,omitempty"`
+	Txs                *int64   `json:"txs,omitempty"`
+	UTXOIncrease       *int64   `json:"utxo_increase,omitempty"`
+	UTXOSizeIncrease   *int64   `json:"utxo_size_inc,omitempty"`
 }
 
 type GetBlockVerboseResultBase struct {
@@ -77,9 +79,11 @@ type GetBlockVerboseResultBase struct {
 	VersionHex    string  `json:"versionHex"`
 	MerkleRoot    string  `json:"merkleroot"`
 	Time          int64   `json:"time"`
+	MedianTime    int64   `json:"mediantime"`
 	Nonce         uint32  `json:"nonce"`
 	Bits          string  `json:"bits"`
 	Difficulty    float64 `json:"difficulty"`
+	ChainWork     string  `json:"chainwork"`
 	PreviousHash  string  `json:"previousblockhash,omitempty"`
 	NextHash      string  `json:"nextblockhash,omitempty"`
 
@@ -337,8 +341,13 @@ type GetChainTipsResult struct {
 // GetMempoolInfoResult models the data returned from the getmempoolinfo
 // command.
 type GetMempoolInfoResult struct {
-	Size  int64 `json:"size"`
-	Bytes int64 `json:"bytes"`
+	Size             int64   `json:"size"`             // Current tx count
+	Bytes            int64   `json:"bytes"`            // Sum of all virtual transaction sizes as defined in BIP 141. Differs from actual serialized size because witness data is discounted
+	Usage            int64   `json:"usage"`            // Total memory usage for the mempool
+	TotalFee         float64 `json:"total_fee"`        // Total fees for the mempool in LBC, ignoring modified fees through prioritizetransaction
+	MemPoolMinFee    float64 `json:"mempoolminfee"`    // Minimum fee rate in LBC/kvB for tx to be accepted. Is the maximum of minrelaytxfee and minimum mempool fee
+	MinRelayTxFee    float64 `json:"minrelaytxfee"`    // Current minimum relay fee for transactions
+	UnbroadcastCount int64   `json:"unbroadcastcount"` // Current number of transactions that haven't passed initial broadcast yet
 }
 
 // NetworksResult models the networks data from the getnetworkinfo command.
@@ -714,6 +723,15 @@ type InfoChainResult struct {
 	Errors          string  `json:"errors"`
 }
 
+// ListBannedResult models the data returned from the listbanned command.
+type ListBannedResult struct {
+	Address       string `json:"address"`
+	BanCreated    int64  `json:"ban_created"`
+	BannedUntil   int64  `json:"banned_until"`
+	BanDuration   int64  `json:"ban_duration"`
+	TimeRemaining int64  `json:"time_remaining"`
+}
+
 // TxRawResult models the data from the getrawtransaction command.
 type TxRawResult struct {
 	Hex           string `json:"hex"`

btcjson/doc.go

@@ -5,7 +5,7 @@
 /*
 Package btcjson provides primitives for working with the bitcoin JSON-RPC API.
 
-Overview
+# Overview
 
 When communicating via the JSON-RPC protocol, all of the commands need to be
 marshalled to and from the the wire in the appropriate format.  This package
@@ -14,7 +14,7 @@ provides data structures and primitives to ease this process.
 In addition, it also provides some additional features such as custom command
 registration, command categorization, and reflection-based help generation.
 
-JSON-RPC Protocol Overview
+# JSON-RPC Protocol Overview
 
 This information is not necessary in order to use this package, but it does
 provide some intuition into what the marshalling and unmarshalling that is
@@ -47,39 +47,39 @@ with it) doesn't always follow the spec and will sometimes return an error
 string in the result field with a null error for certain commands.  However,
 for the most part, the error field will be set as described on failure.
 
-Marshalling and Unmarshalling
+# Marshalling and Unmarshalling
 
 Based upon the discussion above, it should be easy to see how the types of this
 package map into the required parts of the protocol
 
   - Request Objects (type Request)
-    - Commands (type <Foo>Cmd)
-    - Notifications (type <Foo>Ntfn)
+  - Commands (type <Foo>Cmd)
+  - Notifications (type <Foo>Ntfn)
   - Response Objects (type Response)
-    - Result (type <Foo>Result)
+  - Result (type <Foo>Result)
 
 To simplify the marshalling of the requests and responses, the MarshalCmd and
 MarshalResponse functions are provided.  They return the raw bytes ready to be
 sent across the wire.
 
 Unmarshalling a received Request object is a two step process:
-  1) Unmarshal the raw bytes into a Request struct instance via json.Unmarshal
-  2) Use UnmarshalCmd on the Result field of the unmarshalled Request to create
-     a concrete command or notification instance with all struct fields set
-     accordingly
+ 1. Unmarshal the raw bytes into a Request struct instance via json.Unmarshal
+ 2. Use UnmarshalCmd on the Result field of the unmarshalled Request to create
+    a concrete command or notification instance with all struct fields set
+    accordingly
 
 This approach is used since it provides the caller with access to the additional
 fields in the request that are not part of the command such as the ID.
 
 Unmarshalling a received Response object is also a two step process:
-  1) Unmarhsal the raw bytes into a Response struct instance via json.Unmarshal
-  2) Depending on the ID, unmarshal the Result field of the unmarshalled
-     Response to create a concrete type instance
+ 1. Unmarhsal the raw bytes into a Response struct instance via json.Unmarshal
+ 2. Depending on the ID, unmarshal the Result field of the unmarshalled
+    Response to create a concrete type instance
 
 As above, this approach is used since it provides the caller with access to the
 fields in the response such as the ID and Error.
 
-Command Creation
+# Command Creation
 
 This package provides two approaches for creating a new command.  This first,
 and preferred, method is to use one of the New<Foo>Cmd functions.  This allows
@@ -93,7 +93,7 @@ obviously, run-time which means any mistakes won't be found until the code is
 actually executed.  However, it is quite useful for user-supplied commands
 that are intentionally dynamic.
 
-Custom Command Registration
+# Custom Command Registration
 
 The command handling of this package is built around the concept of registered
 commands.  This is true for the wide variety of commands already provided by the
@@ -104,7 +104,7 @@ function for this purpose.
 A list of all registered methods can be obtained with the RegisteredCmdMethods
 function.
 
-Command Inspection
+# Command Inspection
 
 All registered commands are registered with flags that identify information such
 as whether the command applies to a chain server, wallet server, or is a
@@ -112,7 +112,7 @@ notification along with the method name to use.  These flags can be obtained
 with the MethodUsageFlags flags, and the method can be obtained with the
 CmdMethod function.
 
-Help Generation
+# Help Generation
 
 To facilitate providing consistent help to users of the RPC server, this package
 exposes the GenerateHelp and function which uses reflection on registered
@@ -122,7 +122,7 @@ generate the final help text.
 In addition, the MethodUsageText function is provided to generate consistent
 one-line usage for registered commands and notifications using reflection.
 
-Errors
+# Errors
 
 There are 2 distinct type of errors supported by this package:
 

btcjson/help.go

@@ -476,11 +476,12 @@ func isValidResultType(kind reflect.Kind) bool {
 // an error will use the key in place of the description.
 //
 // The following outlines the required keys:
-//   "<method>--synopsis"             Synopsis for the command
-//   "<method>-<lowerfieldname>"      Description for each command argument
-//   "<typename>-<lowerfieldname>"    Description for each object field
-//   "<method>--condition<#>"         Description for each result condition
-//   "<method>--result<#>"            Description for each primitive result num
+//
+//	"<method>--synopsis"             Synopsis for the command
+//	"<method>-<lowerfieldname>"      Description for each command argument
+//	"<typename>-<lowerfieldname>"    Description for each object field
+//	"<method>--condition<#>"         Description for each result condition
+//	"<method>--result<#>"            Description for each primitive result num
 //
 // Notice that the "special" keys synopsis, condition<#>, and result<#> are
 // preceded by a double dash to ensure they don't conflict with field names.
@@ -492,16 +493,17 @@ func isValidResultType(kind reflect.Kind) bool {
 // For example, consider the 'help' command itself.  There are two possible
 // returns depending on the provided parameters.  So, the help would be
 // generated by calling the function as follows:
-//   GenerateHelp("help", descs, (*string)(nil), (*string)(nil)).
+//
+//	GenerateHelp("help", descs, (*string)(nil), (*string)(nil)).
 //
 // The following keys would then be required in the provided descriptions map:
 //
-//   "help--synopsis":   "Returns a list of all commands or help for ...."
-//   "help-command":     "The command to retrieve help for",
-//   "help--condition0": "no command provided"
-//   "help--condition1": "command specified"
-//   "help--result0":    "List of commands"
-//   "help--result1":    "Help for specified command"
+//	"help--synopsis":   "Returns a list of all commands or help for ...."
+//	"help-command":     "The command to retrieve help for",
+//	"help--condition0": "no command provided"
+//	"help--condition1": "command specified"
+//	"help--result0":    "List of commands"
+//	"help--result1":    "Help for specified command"
 func GenerateHelp(method string, descs map[string]string, resultTypes ...interface{}) (string, error) {
 	// Look up details about the provided method and error out if not
 	// registered.

btcjson/walletsvrcmds.go

@@ -176,12 +176,13 @@ func NewGetAccountCmd(address string) *GetAccountCmd {
 
 // GetAccountAddressCmd defines the getaccountaddress JSON-RPC command.
 type GetAccountAddressCmd struct {
-	Account string
+	Account     *string `jsonrpcdefault:"\"default\""`
+	AddressType *string `jsonrpcdefault:"\"legacy\""`
 }
 
 // NewGetAccountAddressCmd returns a new instance which can be used to issue a
 // getaccountaddress JSON-RPC command.
-func NewGetAccountAddressCmd(account string) *GetAccountAddressCmd {
+func NewGetAccountAddressCmd(account *string) *GetAccountAddressCmd {
 	return &GetAccountAddressCmd{
 		Account: account,
 	}
@@ -189,12 +190,13 @@ func NewGetAccountAddressCmd(account string) *GetAccountAddressCmd {
 
 // GetAddressesByAccountCmd defines the getaddressesbyaccount JSON-RPC command.
 type GetAddressesByAccountCmd struct {
-	Account string
+	Account     *string `jsonrpcdefault:"\"default\""`
+	AddressType *string `jsonrpcdefault:"\"*\""`
 }
 
 // NewGetAddressesByAccountCmd returns a new instance which can be used to issue
 // a getaddressesbyaccount JSON-RPC command.
-func NewGetAddressesByAccountCmd(account string) *GetAddressesByAccountCmd {
+func NewGetAddressesByAccountCmd(account *string) *GetAddressesByAccountCmd {
 	return &GetAddressesByAccountCmd{
 		Account: account,
 	}
@@ -215,8 +217,9 @@ func NewGetAddressInfoCmd(address string) *GetAddressInfoCmd {
 
 // GetBalanceCmd defines the getbalance JSON-RPC command.
 type GetBalanceCmd struct {
-	Account *string
-	MinConf *int `jsonrpcdefault:"1"`
+	Account     *string `jsonrpcdefault:"\"default\""`
+	MinConf     *int    `jsonrpcdefault:"1"`
+	AddressType *string `jsonrpcdefault:"\"*\""`
 }
 
 // NewGetBalanceCmd returns a new instance which can be used to issue a
@@ -242,8 +245,8 @@ func NewGetBalancesCmd() *GetBalancesCmd {
 
 // GetNewAddressCmd defines the getnewaddress JSON-RPC command.
 type GetNewAddressCmd struct {
-	Account     *string
-	AddressType *string // must be one of legacy / p2pkh or p2sh-p2wkh / p2sh-segwit, or p2wkh / bech32
+	Account     *string `jsonrpcdefault:"\"default\""`
+	AddressType *string `jsonrpcdefault:"\"legacy\""`
 }
 
 // NewGetNewAddressCmd returns a new instance which can be used to issue a
@@ -259,7 +262,8 @@ func NewGetNewAddressCmd(account *string) *GetNewAddressCmd {
 
 // GetRawChangeAddressCmd defines the getrawchangeaddress JSON-RPC command.
 type GetRawChangeAddressCmd struct {
-	Account *string
+	Account     *string `jsonrpcdefault:"\"default\""`
+	AddressType *string `jsonrpcdefault:"\"legacy\""`
 }
 
 // NewGetRawChangeAddressCmd returns a new instance which can be used to issue a
@@ -275,8 +279,8 @@ func NewGetRawChangeAddressCmd(account *string) *GetRawChangeAddressCmd {
 
 // GetReceivedByAccountCmd defines the getreceivedbyaccount JSON-RPC command.
 type GetReceivedByAccountCmd struct {
-	Account string
-	MinConf *int `jsonrpcdefault:"1"`
+	Account *string `jsonrpcdefault:"\"default\""`
+	MinConf *int    `jsonrpcdefault:"1"`
 }
 
 // NewGetReceivedByAccountCmd returns a new instance which can be used to issue
@@ -284,7 +288,7 @@ type GetReceivedByAccountCmd struct {
 //
 // The parameters which are pointers indicate they are optional.  Passing nil
 // for optional parameters will use the default value.
-func NewGetReceivedByAccountCmd(account string, minConf *int) *GetReceivedByAccountCmd {
+func NewGetReceivedByAccountCmd(account *string, minConf *int) *GetReceivedByAccountCmd {
 	return &GetReceivedByAccountCmd{
 		Account: account,
 		MinConf: minConf,
@@ -407,7 +411,8 @@ func NewKeyPoolRefillCmd(newSize *uint) *KeyPoolRefillCmd {
 
 // ListAccountsCmd defines the listaccounts JSON-RPC command.
 type ListAccountsCmd struct {
-	MinConf *int `jsonrpcdefault:"1"`
+	MinConf     *int    `jsonrpcdefault:"1"`
+	AddressType *string `jsonrpcdefault:"\"*\""`
 }
 
 // NewListAccountsCmd returns a new instance which can be used to issue a
@@ -501,10 +506,10 @@ func NewListSinceBlockCmd(blockHash *string, targetConfirms *int, includeWatchOn
 
 // ListTransactionsCmd defines the listtransactions JSON-RPC command.
 type ListTransactionsCmd struct {
-	Account          *string
-	Count            *int  `jsonrpcdefault:"10"`
-	From             *int  `jsonrpcdefault:"0"`
-	IncludeWatchOnly *bool `jsonrpcdefault:"false"`
+	Account          *string `jsonrpcdefault:"\"default\""`
+	Count            *int    `jsonrpcdefault:"10"`
+	From             *int    `jsonrpcdefault:"0"`
+	IncludeWatchOnly *bool   `jsonrpcdefault:"false"`
 }
 
 // NewListTransactionsCmd returns a new instance which can be used to issue a
@@ -556,36 +561,13 @@ func NewLockUnspentCmd(unlock bool, transactions []TransactionInput) *LockUnspen
 	}
 }
 
-// MoveCmd defines the move JSON-RPC command.
-type MoveCmd struct {
-	FromAccount string
-	ToAccount   string
-	Amount      float64 // In BTC
-	MinConf     *int    `jsonrpcdefault:"1"`
-	Comment     *string
-}
-
-// NewMoveCmd returns a new instance which can be used to issue a move JSON-RPC
-// command.
-//
-// The parameters which are pointers indicate they are optional.  Passing nil
-// for optional parameters will use the default value.
-func NewMoveCmd(fromAccount, toAccount string, amount float64, minConf *int, comment *string) *MoveCmd {
-	return &MoveCmd{
-		FromAccount: fromAccount,
-		ToAccount:   toAccount,
-		Amount:      amount,
-		MinConf:     minConf,
-		Comment:     comment,
-	}
-}
-
 // SendFromCmd defines the sendfrom JSON-RPC command.
 type SendFromCmd struct {
 	FromAccount string
 	ToAddress   string
 	Amount      float64 // In BTC
 	MinConf     *int    `jsonrpcdefault:"1"`
+	AddressType *string `jsonrpcdefault:"\"*\""`
 	Comment     *string
 	CommentTo   *string
 }
@@ -595,12 +577,15 @@ type SendFromCmd struct {
 //
 // The parameters which are pointers indicate they are optional.  Passing nil
 // for optional parameters will use the default value.
-func NewSendFromCmd(fromAccount, toAddress string, amount float64, minConf *int, comment, commentTo *string) *SendFromCmd {
+func NewSendFromCmd(fromAccount, toAddress string, amount float64,
+	minConf *int, addrType *string, comment, commentTo *string) *SendFromCmd {
+
 	return &SendFromCmd{
 		FromAccount: fromAccount,
 		ToAddress:   toAddress,
 		Amount:      amount,
 		MinConf:     minConf,
+		AddressType: addrType,
 		Comment:     comment,
 		CommentTo:   commentTo,
 	}
@@ -611,6 +596,7 @@ type SendManyCmd struct {
 	FromAccount string
 	Amounts     map[string]float64 `jsonrpcusage:"{\"address\":amount,...}"` // In BTC
 	MinConf     *int               `jsonrpcdefault:"1"`
+	AddressType *string            `jsonrpcdefault:"\"*\""`
 	Comment     *string
 }
 
@@ -619,21 +605,24 @@ type SendManyCmd struct {
 //
 // The parameters which are pointers indicate they are optional.  Passing nil
 // for optional parameters will use the default value.
-func NewSendManyCmd(fromAccount string, amounts map[string]float64, minConf *int, comment *string) *SendManyCmd {
+func NewSendManyCmd(fromAccount string, amounts map[string]float64,
+	minConf *int, addrType *string, comment *string) *SendManyCmd {
 	return &SendManyCmd{
 		FromAccount: fromAccount,
 		Amounts:     amounts,
 		MinConf:     minConf,
+		AddressType: addrType,
 		Comment:     comment,
 	}
 }
 
 // SendToAddressCmd defines the sendtoaddress JSON-RPC command.
 type SendToAddressCmd struct {
-	Address   string
-	Amount    float64
-	Comment   *string
-	CommentTo *string
+	Address     string
+	Amount      float64
+	AddressType *string `jsonrpcdefault:"\"*\""`
+	Comment     *string
+	CommentTo   *string
 }
 
 // NewSendToAddressCmd returns a new instance which can be used to issue a
@@ -641,27 +630,14 @@ type SendToAddressCmd struct {
 //
 // The parameters which are pointers indicate they are optional.  Passing nil
 // for optional parameters will use the default value.
-func NewSendToAddressCmd(address string, amount float64, comment, commentTo *string) *SendToAddressCmd {
+func NewSendToAddressCmd(address string, amount float64, addrType *string,
+	comment, commentTo *string) *SendToAddressCmd {
 	return &SendToAddressCmd{
-		Address:   address,
-		Amount:    amount,
-		Comment:   comment,
-		CommentTo: commentTo,
-	}
-}
-
-// SetAccountCmd defines the setaccount JSON-RPC command.
-type SetAccountCmd struct {
-	Address string
-	Account string
-}
-
-// NewSetAccountCmd returns a new instance which can be used to issue a
-// setaccount JSON-RPC command.
-func NewSetAccountCmd(address, account string) *SetAccountCmd {
-	return &SetAccountCmd{
-		Address: address,
-		Account: account,
+		Address:     address,
+		Amount:      amount,
+		AddressType: addrType,
+		Comment:     comment,
+		CommentTo:   commentTo,
 	}
 }
 
@@ -872,7 +848,8 @@ func (s *ScriptPubKey) UnmarshalJSON(data []byte) error {
 //
 // Descriptors are typically ranged when specified in the form of generic HD
 // chain paths.
-//   Example of a ranged descriptor: pkh(tpub.../*)
+//
+//	Example of a ranged descriptor: pkh(tpub.../*)
 //
 // The value can be an int to specify the end of the range, or the range
 // itself, as []int{begin, end}.
@@ -998,6 +975,24 @@ func NewImportMultiCmd(requests []ImportMultiRequest, options *ImportMultiOption
 	}
 }
 
+// RescanBlockchainCmd defines the RescanBlockchain JSON-RPC command.
+type RescanBlockchainCmd struct {
+	StartHeight *int32 `jsonrpcdefault:"0"`
+	StopHeight  *int32
+}
+
+// NewRescanBlockchainCmd returns a new instance which can be used to issue
+// an RescanBlockchain JSON-RPC command.
+//
+// The parameters which are pointers indicate they are optional. Passing nil
+// for optional parameters will use the default value.
+func NewRescanBlockchainCmd(startHeight *int32, stopHeight *int32) *RescanBlockchainCmd {
+	return &RescanBlockchainCmd{
+		StartHeight: startHeight,
+		StopHeight:  stopHeight,
+	}
+}
+
 // PsbtInput represents an input to include in the PSBT created by the
 // WalletCreateFundedPsbtCmd command.
 type PsbtInput struct {
@@ -1119,11 +1114,10 @@ func init() {
 	MustRegisterCmd("listunspent", (*ListUnspentCmd)(nil), flags)
 	MustRegisterCmd("loadwallet", (*LoadWalletCmd)(nil), flags)
 	MustRegisterCmd("lockunspent", (*LockUnspentCmd)(nil), flags)
-	MustRegisterCmd("move", (*MoveCmd)(nil), flags)
+	MustRegisterCmd("rescanblockchain", (*RescanBlockchainCmd)(nil), flags)
 	MustRegisterCmd("sendfrom", (*SendFromCmd)(nil), flags)
 	MustRegisterCmd("sendmany", (*SendManyCmd)(nil), flags)
 	MustRegisterCmd("sendtoaddress", (*SendToAddressCmd)(nil), flags)
-	MustRegisterCmd("setaccount", (*SetAccountCmd)(nil), flags)
 	MustRegisterCmd("settxfee", (*SetTxFeeCmd)(nil), flags)
 	MustRegisterCmd("signmessage", (*SignMessageCmd)(nil), flags)
 	MustRegisterCmd("signrawtransaction", (*SignRawTransactionCmd)(nil), flags)

btcjson/walletsvrcmds_test.go

@@ -287,11 +287,12 @@ func TestWalletSvrCmds(t *testing.T) {
 				return btcjson.NewCmd("getaccountaddress", "acct")
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewGetAccountAddressCmd("acct")
+				return btcjson.NewGetAccountAddressCmd(btcjson.String("acct"))
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getaccountaddress","params":["acct"],"id":1}`,
 			unmarshalled: &btcjson.GetAccountAddressCmd{
-				Account: "acct",
+				Account:     btcjson.String("acct"),
+				AddressType: btcjson.String("legacy"),
 			},
 		},
 		{
@@ -300,11 +301,12 @@ func TestWalletSvrCmds(t *testing.T) {
 				return btcjson.NewCmd("getaddressesbyaccount", "acct")
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewGetAddressesByAccountCmd("acct")
+				return btcjson.NewGetAddressesByAccountCmd(btcjson.String("acct"))
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getaddressesbyaccount","params":["acct"],"id":1}`,
 			unmarshalled: &btcjson.GetAddressesByAccountCmd{
-				Account: "acct",
+				Account:     btcjson.String("acct"),
+				AddressType: btcjson.String("*"),
 			},
 		},
 		{
@@ -330,8 +332,9 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getbalance","params":[],"id":1}`,
 			unmarshalled: &btcjson.GetBalanceCmd{
-				Account: nil,
-				MinConf: btcjson.Int(1),
+				Account:     btcjson.String("default"),
+				MinConf:     btcjson.Int(1),
+				AddressType: btcjson.String("*"),
 			},
 		},
 		{
@@ -344,8 +347,9 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getbalance","params":["acct"],"id":1}`,
 			unmarshalled: &btcjson.GetBalanceCmd{
-				Account: btcjson.String("acct"),
-				MinConf: btcjson.Int(1),
+				Account:     btcjson.String("acct"),
+				MinConf:     btcjson.Int(1),
+				AddressType: btcjson.String("*"),
 			},
 		},
 		{
@@ -358,8 +362,9 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getbalance","params":["acct",6],"id":1}`,
 			unmarshalled: &btcjson.GetBalanceCmd{
-				Account: btcjson.String("acct"),
-				MinConf: btcjson.Int(6),
+				Account:     btcjson.String("acct"),
+				MinConf:     btcjson.Int(6),
+				AddressType: btcjson.String("*"),
 			},
 		},
 		{
@@ -383,7 +388,8 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getnewaddress","params":[],"id":1}`,
 			unmarshalled: &btcjson.GetNewAddressCmd{
-				Account: nil,
+				Account:     btcjson.String("default"),
+				AddressType: btcjson.String("legacy"),
 			},
 		},
 		{
@@ -396,7 +402,8 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getnewaddress","params":["acct"],"id":1}`,
 			unmarshalled: &btcjson.GetNewAddressCmd{
-				Account: btcjson.String("acct"),
+				Account:     btcjson.String("acct"),
+				AddressType: btcjson.String("legacy"),
 			},
 		},
 		{
@@ -409,7 +416,8 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getrawchangeaddress","params":[],"id":1}`,
 			unmarshalled: &btcjson.GetRawChangeAddressCmd{
-				Account: nil,
+				Account:     btcjson.String("default"),
+				AddressType: btcjson.String("legacy"),
 			},
 		},
 		{
@@ -422,7 +430,8 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getrawchangeaddress","params":["acct"],"id":1}`,
 			unmarshalled: &btcjson.GetRawChangeAddressCmd{
-				Account: btcjson.String("acct"),
+				Account:     btcjson.String("acct"),
+				AddressType: btcjson.String("legacy"),
 			},
 		},
 		{
@@ -431,11 +440,11 @@ func TestWalletSvrCmds(t *testing.T) {
 				return btcjson.NewCmd("getreceivedbyaccount", "acct")
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewGetReceivedByAccountCmd("acct", nil)
+				return btcjson.NewGetReceivedByAccountCmd(btcjson.String("acct"), nil)
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getreceivedbyaccount","params":["acct"],"id":1}`,
 			unmarshalled: &btcjson.GetReceivedByAccountCmd{
-				Account: "acct",
+				Account: btcjson.String("acct"),
 				MinConf: btcjson.Int(1),
 			},
 		},
@@ -445,11 +454,11 @@ func TestWalletSvrCmds(t *testing.T) {
 				return btcjson.NewCmd("getreceivedbyaccount", "acct", 6)
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewGetReceivedByAccountCmd("acct", btcjson.Int(6))
+				return btcjson.NewGetReceivedByAccountCmd(btcjson.String("acct"), btcjson.Int(6))
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getreceivedbyaccount","params":["acct",6],"id":1}`,
 			unmarshalled: &btcjson.GetReceivedByAccountCmd{
-				Account: "acct",
+				Account: btcjson.String("acct"),
 				MinConf: btcjson.Int(6),
 			},
 		},
@@ -601,7 +610,8 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"listaccounts","params":[],"id":1}`,
 			unmarshalled: &btcjson.ListAccountsCmd{
-				MinConf: btcjson.Int(1),
+				MinConf:     btcjson.Int(1),
+				AddressType: btcjson.String("*"),
 			},
 		},
 		{
@@ -614,7 +624,8 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"listaccounts","params":[6],"id":1}`,
 			unmarshalled: &btcjson.ListAccountsCmd{
-				MinConf: btcjson.Int(6),
+				MinConf:     btcjson.Int(6),
+				AddressType: btcjson.String("*"),
 			},
 		},
 		{
@@ -844,7 +855,7 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"listtransactions","params":[],"id":1}`,
 			unmarshalled: &btcjson.ListTransactionsCmd{
-				Account:          nil,
+				Account:          btcjson.String("default"),
 				Count:            btcjson.Int(10),
 				From:             btcjson.Int(0),
 				IncludeWatchOnly: btcjson.Bool(false),
@@ -996,64 +1007,13 @@ func TestWalletSvrCmds(t *testing.T) {
 				},
 			},
 		},
-		{
-			name: "move",
-			newCmd: func() (interface{}, error) {
-				return btcjson.NewCmd("move", "from", "to", 0.5)
-			},
-			staticCmd: func() interface{} {
-				return btcjson.NewMoveCmd("from", "to", 0.5, nil, nil)
-			},
-			marshalled: `{"jsonrpc":"1.0","method":"move","params":["from","to",0.5],"id":1}`,
-			unmarshalled: &btcjson.MoveCmd{
-				FromAccount: "from",
-				ToAccount:   "to",
-				Amount:      0.5,
-				MinConf:     btcjson.Int(1),
-				Comment:     nil,
-			},
-		},
-		{
-			name: "move optional1",
-			newCmd: func() (interface{}, error) {
-				return btcjson.NewCmd("move", "from", "to", 0.5, 6)
-			},
-			staticCmd: func() interface{} {
-				return btcjson.NewMoveCmd("from", "to", 0.5, btcjson.Int(6), nil)
-			},
-			marshalled: `{"jsonrpc":"1.0","method":"move","params":["from","to",0.5,6],"id":1}`,
-			unmarshalled: &btcjson.MoveCmd{
-				FromAccount: "from",
-				ToAccount:   "to",
-				Amount:      0.5,
-				MinConf:     btcjson.Int(6),
-				Comment:     nil,
-			},
-		},
-		{
-			name: "move optional2",
-			newCmd: func() (interface{}, error) {
-				return btcjson.NewCmd("move", "from", "to", 0.5, 6, "comment")
-			},
-			staticCmd: func() interface{} {
-				return btcjson.NewMoveCmd("from", "to", 0.5, btcjson.Int(6), btcjson.String("comment"))
-			},
-			marshalled: `{"jsonrpc":"1.0","method":"move","params":["from","to",0.5,6,"comment"],"id":1}`,
-			unmarshalled: &btcjson.MoveCmd{
-				FromAccount: "from",
-				ToAccount:   "to",
-				Amount:      0.5,
-				MinConf:     btcjson.Int(6),
-				Comment:     btcjson.String("comment"),
-			},
-		},
 		{
 			name: "sendfrom",
 			newCmd: func() (interface{}, error) {
 				return btcjson.NewCmd("sendfrom", "from", "1Address", 0.5)
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewSendFromCmd("from", "1Address", 0.5, nil, nil, nil)
+				return btcjson.NewSendFromCmd("from", "1Address", 0.5, nil, nil, nil, nil)
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"sendfrom","params":["from","1Address",0.5],"id":1}`,
 			unmarshalled: &btcjson.SendFromCmd{
@@ -1061,6 +1021,7 @@ func TestWalletSvrCmds(t *testing.T) {
 				ToAddress:   "1Address",
 				Amount:      0.5,
 				MinConf:     btcjson.Int(1),
+				AddressType: btcjson.String("*"),
 				Comment:     nil,
 				CommentTo:   nil,
 			},
@@ -1071,7 +1032,7 @@ func TestWalletSvrCmds(t *testing.T) {
 				return btcjson.NewCmd("sendfrom", "from", "1Address", 0.5, 6)
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewSendFromCmd("from", "1Address", 0.5, btcjson.Int(6), nil, nil)
+				return btcjson.NewSendFromCmd("from", "1Address", 0.5, btcjson.Int(6), nil, nil, nil)
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"sendfrom","params":["from","1Address",0.5,6],"id":1}`,
 			unmarshalled: &btcjson.SendFromCmd{
@@ -1079,6 +1040,7 @@ func TestWalletSvrCmds(t *testing.T) {
 				ToAddress:   "1Address",
 				Amount:      0.5,
 				MinConf:     btcjson.Int(6),
+				AddressType: btcjson.String("*"),
 				Comment:     nil,
 				CommentTo:   nil,
 			},
@@ -1086,37 +1048,59 @@ func TestWalletSvrCmds(t *testing.T) {
 		{
 			name: "sendfrom optional2",
 			newCmd: func() (interface{}, error) {
-				return btcjson.NewCmd("sendfrom", "from", "1Address", 0.5, 6, "comment")
+				return btcjson.NewCmd("sendfrom", "from", "1Address", 0.5, 6, "legacy")
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewSendFromCmd("from", "1Address", 0.5, btcjson.Int(6),
-					btcjson.String("comment"), nil)
+				return btcjson.NewSendFromCmd("from", "1Address", 0.5, btcjson.Int(6), btcjson.String("legacy"),
+					nil, nil)
 			},
-			marshalled: `{"jsonrpc":"1.0","method":"sendfrom","params":["from","1Address",0.5,6,"comment"],"id":1}`,
+			marshalled: `{"jsonrpc":"1.0","method":"sendfrom","params":["from","1Address",0.5,6,"legacy"],"id":1}`,
 			unmarshalled: &btcjson.SendFromCmd{
 				FromAccount: "from",
 				ToAddress:   "1Address",
 				Amount:      0.5,
 				MinConf:     btcjson.Int(6),
-				Comment:     btcjson.String("comment"),
+				AddressType: btcjson.String("legacy"),
+				Comment:     nil,
 				CommentTo:   nil,
 			},
 		},
 		{
 			name: "sendfrom optional3",
 			newCmd: func() (interface{}, error) {
-				return btcjson.NewCmd("sendfrom", "from", "1Address", 0.5, 6, "comment", "commentto")
+				return btcjson.NewCmd("sendfrom", "from", "1Address", 0.5, 6, "legacy", "comment")
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewSendFromCmd("from", "1Address", 0.5, btcjson.Int(6),
-					btcjson.String("comment"), btcjson.String("commentto"))
+				return btcjson.NewSendFromCmd("from", "1Address", 0.5, btcjson.Int(6), btcjson.String("legacy"),
+					btcjson.String("comment"), nil)
 			},
-			marshalled: `{"jsonrpc":"1.0","method":"sendfrom","params":["from","1Address",0.5,6,"comment","commentto"],"id":1}`,
+			marshalled: `{"jsonrpc":"1.0","method":"sendfrom","params":["from","1Address",0.5,6,"legacy","comment"],"id":1}`,
 			unmarshalled: &btcjson.SendFromCmd{
 				FromAccount: "from",
 				ToAddress:   "1Address",
 				Amount:      0.5,
 				MinConf:     btcjson.Int(6),
+				AddressType: btcjson.String("legacy"),
+				Comment:     btcjson.String("comment"),
+				CommentTo:   nil,
+			},
+		},
+		{
+			name: "sendfrom optional4",
+			newCmd: func() (interface{}, error) {
+				return btcjson.NewCmd("sendfrom", "from", "1Address", 0.5, 6, "legacy", "comment", "commentto")
+			},
+			staticCmd: func() interface{} {
+				return btcjson.NewSendFromCmd("from", "1Address", 0.5, btcjson.Int(6), btcjson.String("legacy"),
+					btcjson.String("comment"), btcjson.String("commentto"))
+			},
+			marshalled: `{"jsonrpc":"1.0","method":"sendfrom","params":["from","1Address",0.5,6,"legacy","comment","commentto"],"id":1}`,
+			unmarshalled: &btcjson.SendFromCmd{
+				FromAccount: "from",
+				ToAddress:   "1Address",
+				Amount:      0.5,
+				MinConf:     btcjson.Int(6),
+				AddressType: btcjson.String("legacy"),
 				Comment:     btcjson.String("comment"),
 				CommentTo:   btcjson.String("commentto"),
 			},
@@ -1128,13 +1112,14 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			staticCmd: func() interface{} {
 				amounts := map[string]float64{"1Address": 0.5}
-				return btcjson.NewSendManyCmd("from", amounts, nil, nil)
+				return btcjson.NewSendManyCmd("from", amounts, nil, nil, nil)
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"sendmany","params":["from",{"1Address":0.5}],"id":1}`,
 			unmarshalled: &btcjson.SendManyCmd{
 				FromAccount: "from",
 				Amounts:     map[string]float64{"1Address": 0.5},
 				MinConf:     btcjson.Int(1),
+				AddressType: btcjson.String("*"),
 				Comment:     nil,
 			},
 		},
@@ -1145,30 +1130,50 @@ func TestWalletSvrCmds(t *testing.T) {
 			},
 			staticCmd: func() interface{} {
 				amounts := map[string]float64{"1Address": 0.5}
-				return btcjson.NewSendManyCmd("from", amounts, btcjson.Int(6), nil)
+				return btcjson.NewSendManyCmd("from", amounts, btcjson.Int(6), nil, nil)
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"sendmany","params":["from",{"1Address":0.5},6],"id":1}`,
 			unmarshalled: &btcjson.SendManyCmd{
 				FromAccount: "from",
 				Amounts:     map[string]float64{"1Address": 0.5},
 				MinConf:     btcjson.Int(6),
+				AddressType: btcjson.String("*"),
 				Comment:     nil,
 			},
 		},
 		{
 			name: "sendmany optional2",
 			newCmd: func() (interface{}, error) {
-				return btcjson.NewCmd("sendmany", "from", `{"1Address":0.5}`, 6, "comment")
+				return btcjson.NewCmd("sendmany", "from", `{"1Address":0.5}`, 6, "legacy")
 			},
 			staticCmd: func() interface{} {
 				amounts := map[string]float64{"1Address": 0.5}
-				return btcjson.NewSendManyCmd("from", amounts, btcjson.Int(6), btcjson.String("comment"))
+				return btcjson.NewSendManyCmd("from", amounts, btcjson.Int(6), btcjson.String("legacy"), nil)
 			},
-			marshalled: `{"jsonrpc":"1.0","method":"sendmany","params":["from",{"1Address":0.5},6,"comment"],"id":1}`,
+			marshalled: `{"jsonrpc":"1.0","method":"sendmany","params":["from",{"1Address":0.5},6,"legacy"],"id":1}`,
 			unmarshalled: &btcjson.SendManyCmd{
 				FromAccount: "from",
 				Amounts:     map[string]float64{"1Address": 0.5},
 				MinConf:     btcjson.Int(6),
+				AddressType: btcjson.String("legacy"),
+				Comment:     nil,
+			},
+		},
+		{
+			name: "sendmany optional3",
+			newCmd: func() (interface{}, error) {
+				return btcjson.NewCmd("sendmany", "from", `{"1Address":0.5}`, 6, "legacy", "comment")
+			},
+			staticCmd: func() interface{} {
+				amounts := map[string]float64{"1Address": 0.5}
+				return btcjson.NewSendManyCmd("from", amounts, btcjson.Int(6), btcjson.String("legacy"), btcjson.String("comment"))
+			},
+			marshalled: `{"jsonrpc":"1.0","method":"sendmany","params":["from",{"1Address":0.5},6,"legacy","comment"],"id":1}`,
+			unmarshalled: &btcjson.SendManyCmd{
+				FromAccount: "from",
+				Amounts:     map[string]float64{"1Address": 0.5},
+				MinConf:     btcjson.Int(6),
+				AddressType: btcjson.String("legacy"),
 				Comment:     btcjson.String("comment"),
 			},
 		},
@@ -1178,45 +1183,50 @@ func TestWalletSvrCmds(t *testing.T) {
 				return btcjson.NewCmd("sendtoaddress", "1Address", 0.5)
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewSendToAddressCmd("1Address", 0.5, nil, nil)
+				return btcjson.NewSendToAddressCmd("1Address", 0.5, nil, nil, nil)
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"sendtoaddress","params":["1Address",0.5],"id":1}`,
 			unmarshalled: &btcjson.SendToAddressCmd{
-				Address:   "1Address",
-				Amount:    0.5,
-				Comment:   nil,
-				CommentTo: nil,
+				Address:     "1Address",
+				Amount:      0.5,
+				AddressType: btcjson.String("*"),
+				Comment:     nil,
+				CommentTo:   nil,
 			},
 		},
 		{
 			name: "sendtoaddress optional1",
 			newCmd: func() (interface{}, error) {
-				return btcjson.NewCmd("sendtoaddress", "1Address", 0.5, "comment", "commentto")
+				return btcjson.NewCmd("sendtoaddress", "1Address", 0.5, "legacy")
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewSendToAddressCmd("1Address", 0.5, btcjson.String("comment"),
-					btcjson.String("commentto"))
+				return btcjson.NewSendToAddressCmd("1Address", 0.5, btcjson.String("legacy"), nil, nil)
 			},
-			marshalled: `{"jsonrpc":"1.0","method":"sendtoaddress","params":["1Address",0.5,"comment","commentto"],"id":1}`,
+			marshalled: `{"jsonrpc":"1.0","method":"sendtoaddress","params":["1Address",0.5,"legacy"],"id":1}`,
 			unmarshalled: &btcjson.SendToAddressCmd{
-				Address:   "1Address",
-				Amount:    0.5,
-				Comment:   btcjson.String("comment"),
-				CommentTo: btcjson.String("commentto"),
+				Address:     "1Address",
+				Amount:      0.5,
+				AddressType: btcjson.String("legacy"),
+				Comment:     nil,
+				CommentTo:   nil,
 			},
 		},
 		{
-			name: "setaccount",
+			name: "sendtoaddress optional2",
 			newCmd: func() (interface{}, error) {
-				return btcjson.NewCmd("setaccount", "1Address", "acct")
+				return btcjson.NewCmd("sendtoaddress", "1Address", 0.5, "legacy", "comment", "commentto")
 			},
 			staticCmd: func() interface{} {
-				return btcjson.NewSetAccountCmd("1Address", "acct")
+				return btcjson.NewSendToAddressCmd("1Address", 0.5, btcjson.String("legacy"), btcjson.String("comment"),
+					btcjson.String("commentto"))
 			},
-			marshalled: `{"jsonrpc":"1.0","method":"setaccount","params":["1Address","acct"],"id":1}`,
-			unmarshalled: &btcjson.SetAccountCmd{
-				Address: "1Address",
-				Account: "acct",
+			marshalled: `{"jsonrpc":"1.0","method":"sendtoaddress","params":["1Address",0.5,"legacy","comment","commentto"],"id":1}`,
+			unmarshalled: &btcjson.SendToAddressCmd{
+				Address:     "1Address",
+				Amount:      0.5,
+				AddressType: btcjson.String("legacy"),
+				Comment:     btcjson.String("comment"),
+				CommentTo:   btcjson.String("commentto"),
 			},
 		},
 		{

btcjson/walletsvrresults.go

@@ -47,13 +47,32 @@ type embeddedAddressInfo struct {
 // Reference: https://bitcoincore.org/en/doc/0.20.0/rpc/wallet/getaddressinfo
 //
 // The GetAddressInfoResult has three segments:
-//   1. General information about the address.
-//   2. Metadata (Timestamp, HDKeyPath, HDSeedID) and wallet fields
-//      (IsMine, IsWatchOnly).
-//   3. Information about the embedded address in case of P2SH or P2WSH.
-//      Same structure as (1).
+//  1. General information about the address.
+//  2. Metadata (Timestamp, HDKeyPath, HDSeedID) and wallet fields
+//     (IsMine, IsWatchOnly).
+//  3. Information about the embedded address in case of P2SH or P2WSH.
+//     Same structure as (1).
 type GetAddressInfoResult struct {
-	embeddedAddressInfo
+	// The following fields are identical to embeddedAddressInfo.
+	// However, the utility to generate RPC help message can't handle
+	// embedded field properly. So, spell out the attributes individually.
+	Address             string                `json:"address"`
+	ScriptPubKey        string                `json:"scriptPubKey"`
+	Descriptor          *string               `json:"desc,omitempty"`
+	IsScript            bool                  `json:"isscript"`
+	IsChange            bool                  `json:"ischange"`
+	IsWitness           bool                  `json:"iswitness"`
+	WitnessVersion      int                   `json:"witness_version,omitempty"`
+	WitnessProgram      *string               `json:"witness_program,omitempty"`
+	ScriptType          *txscript.ScriptClass `json:"script,omitempty"`
+	Hex                 *string               `json:"hex,omitempty"`
+	PubKeys             *[]string             `json:"pubkeys,omitempty"`
+	SignaturesRequired  *int                  `json:"sigsrequired,omitempty"`
+	PubKey              *string               `json:"pubkey,omitempty"`
+	IsCompressed        *bool                 `json:"iscompressed,omitempty"`
+	HDMasterFingerprint *string               `json:"hdmasterfingerprint,omitempty"`
+	Labels              []string              `json:"labels"`
+
 	IsMine      bool                 `json:"ismine"`
 	IsWatchOnly bool                 `json:"iswatchonly"`
 	Timestamp   *int                 `json:"timestamp,omitempty"`
@@ -155,6 +174,7 @@ type GetTransactionResult struct {
 	TimeReceived    int64                         `json:"timereceived"`
 	Details         []GetTransactionDetailsResult `json:"details"`
 	Hex             string                        `json:"hex"`
+	Generated       bool                          `json:"generated"`
 }
 
 type ScanningOrFalse struct {
@@ -269,7 +289,6 @@ type ListReceivedByAccountResult struct {
 // ListReceivedByAddressResult models the data from the listreceivedbyaddress
 // command.
 type ListReceivedByAddressResult struct {
-	Account           string   `json:"account"`
 	Address           string   `json:"address"`
 	Amount            float64  `json:"amount"`
 	Confirmations     uint64   `json:"confirmations"`
@@ -298,6 +317,12 @@ type ListUnspentResult struct {
 	IsStake       bool    `json:"isstake"`
 }
 
+// RescanBlockchainResult models the data returned from the rescanblockchain command.
+type RescanBlockchainResult struct {
+	StartHeight int32 `json:"start_height"`
+	StoptHeight int32 `json:"stop_height"`
+}
+
 // SignRawTransactionError models the data that contains script verification
 // errors from the signrawtransaction request.
 type SignRawTransactionError struct {

btcjson/walletsvrresults_test.go

@@ -37,10 +37,8 @@ func TestGetAddressInfoResult(t *testing.T) {
 			name:   "GetAddressInfoResult - ScriptType",
 			result: `{"script":"nonstandard","address":"1abc"}`,
 			want: GetAddressInfoResult{
-				embeddedAddressInfo: embeddedAddressInfo{
-					Address:    "1abc",
-					ScriptType: nonStandard,
-				},
+				Address:    "1abc",
+				ScriptType: nonStandard,
 			},
 		},
 		{

btcjson/walletsvrwscmds.go

@@ -40,7 +40,7 @@ func NewExportWatchingWalletCmd(account *string, download *bool) *ExportWatching
 
 // GetUnconfirmedBalanceCmd defines the getunconfirmedbalance JSON-RPC command.
 type GetUnconfirmedBalanceCmd struct {
-	Account *string
+	Account *string `jsonrpcdefault:"\"default\""`
 }
 
 // NewGetUnconfirmedBalanceCmd returns a new instance which can be used to issue
@@ -58,7 +58,7 @@ func NewGetUnconfirmedBalanceCmd(account *string) *GetUnconfirmedBalanceCmd {
 // command.
 type ListAddressTransactionsCmd struct {
 	Addresses []string
-	Account   *string
+	Account   *string `jsonrpcdefault:"\"default\""`
 }
 
 // NewListAddressTransactionsCmd returns a new instance which can be used to
@@ -75,7 +75,7 @@ func NewListAddressTransactionsCmd(addresses []string, account *string) *ListAdd
 
 // ListAllTransactionsCmd defines the listalltransactions JSON-RPC command.
 type ListAllTransactionsCmd struct {
-	Account *string
+	Account *string `jsonrpcdefault:"\"default\""`
 }
 
 // NewListAllTransactionsCmd returns a new instance which can be used to issue a
@@ -114,9 +114,8 @@ func NewWalletIsLockedCmd() *WalletIsLockedCmd {
 }
 
 func init() {
-	// The commands in this file are only usable with a wallet server via
-	// websockets.
-	flags := UFWalletOnly | UFWebsocketOnly
+	// The commands in this file are only usable with a wallet server.
+	flags := UFWalletOnly
 
 	MustRegisterCmd("createencryptedwallet", (*CreateEncryptedWalletCmd)(nil), flags)
 	MustRegisterCmd("exportwatchingwallet", (*ExportWatchingWalletCmd)(nil), flags)

btcjson/walletsvrwscmds_test.go

@@ -71,7 +71,7 @@ func TestWalletSvrWsCmds(t *testing.T) {
 		{
 			name: "exportwatchingwallet optional2",
 			newCmd: func() (interface{}, error) {
-				return btcjson.NewCmd("exportwatchingwallet", "acct", true)
+				return btcjson.NewCmd("exportwatchingwallet", btcjson.String("acct"), true)
 			},
 			staticCmd: func() interface{} {
 				return btcjson.NewExportWatchingWalletCmd(btcjson.String("acct"),
@@ -93,7 +93,7 @@ func TestWalletSvrWsCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"getunconfirmedbalance","params":[],"id":1}`,
 			unmarshalled: &btcjson.GetUnconfirmedBalanceCmd{
-				Account: nil,
+				Account: btcjson.String("default"),
 			},
 		},
 		{
@@ -120,7 +120,7 @@ func TestWalletSvrWsCmds(t *testing.T) {
 			marshalled: `{"jsonrpc":"1.0","method":"listaddresstransactions","params":[["1Address"]],"id":1}`,
 			unmarshalled: &btcjson.ListAddressTransactionsCmd{
 				Addresses: []string{"1Address"},
-				Account:   nil,
+				Account:   btcjson.String("default"),
 			},
 		},
 		{
@@ -148,7 +148,7 @@ func TestWalletSvrWsCmds(t *testing.T) {
 			},
 			marshalled: `{"jsonrpc":"1.0","method":"listalltransactions","params":[],"id":1}`,
 			unmarshalled: &btcjson.ListAllTransactionsCmd{
-				Account: nil,
+				Account: btcjson.String("default"),
 			},
 		},
 		{

chaincfg/chainhash/hashfuncs.go

@@ -39,11 +39,11 @@ func DoubleHashH(b []byte) Hash {
 
 // LbryPoWHashH calculates returns the PoW Hash.
 //
-//   doubled  := SHA256(SHA256(b))
-//   expanded := SHA512(doubled)
-//   left     := RIPEMD160(expanded[0:32])
-//   right    := RIPEMD160(expanded[32:64])
-//   result   := SHA256(SHA256(left||right))
+//	doubled  := SHA256(SHA256(b))
+//	expanded := SHA512(doubled)
+//	left     := RIPEMD160(expanded[0:32])
+//	right    := RIPEMD160(expanded[32:64])
+//	result   := SHA256(SHA256(left||right))
 func LbryPoWHashH(b []byte) Hash {
 	doubled := DoubleHashB(b)
 	expanded := sha512.Sum512(doubled)

chaincfg/doc.go

@@ -18,40 +18,40 @@
 // When a network parameter is needed, it may then be looked up through this
 // variable (either directly, or hidden in a library call).
 //
-//  package main
+//	package main
 //
-//  import (
-//          "flag"
-//          "fmt"
-//          "log"
+//	import (
+//	        "flag"
+//	        "fmt"
+//	        "log"
 //
-//          btcutil "github.com/lbryio/lbcutil"
-//          "github.com/lbryio/lbcd/chaincfg"
-//  )
+//	        btcutil "github.com/lbryio/lbcutil"
+//	        "github.com/lbryio/lbcd/chaincfg"
+//	)
 //
-//  var testnet = flag.Bool("testnet", false, "operate on the testnet Bitcoin network")
+//	var testnet = flag.Bool("testnet", false, "operate on the testnet Bitcoin network")
 //
-//  // By default (without -testnet), use mainnet.
-//  var chainParams = &chaincfg.MainNetParams
+//	// By default (without -testnet), use mainnet.
+//	var chainParams = &chaincfg.MainNetParams
 //
-//  func main() {
-//          flag.Parse()
+//	func main() {
+//	        flag.Parse()
 //
-//          // Modify active network parameters if operating on testnet.
-//          if *testnet {
-//                  chainParams = &chaincfg.TestNet3Params
-//          }
+//	        // Modify active network parameters if operating on testnet.
+//	        if *testnet {
+//	                chainParams = &chaincfg.TestNet3Params
+//	        }
 //
-//          // later...
+//	        // later...
 //
-//          // Create and print new payment address, specific to the active network.
-//          pubKeyHash := make([]byte, 20)
-//          addr, err := btcutil.NewAddressPubKeyHash(pubKeyHash, chainParams)
-//          if err != nil {
-//                  log.Fatal(err)
-//          }
-//          fmt.Println(addr)
-//  }
+//	        // Create and print new payment address, specific to the active network.
+//	        pubKeyHash := make([]byte, 20)
+//	        addr, err := btcutil.NewAddressPubKeyHash(pubKeyHash, chainParams)
+//	        if err != nil {
+//	                log.Fatal(err)
+//	        }
+//	        fmt.Println(addr)
+//	}
 //
 // If an application does not use one of the three standard Bitcoin networks,
 // a new Params struct may be created which defines the parameters for the

chaincfg/params.go

@@ -794,8 +794,9 @@ func IsBech32SegwitPrefix(prefix string) bool {
 // ErrInvalidHDKeyID error will be returned.
 //
 // Reference:
-//   SLIP-0132 : Registered HD version bytes for BIP-0032
-//   https://github.com/satoshilabs/slips/blob/master/slip-0132.md
+//
+//	SLIP-0132 : Registered HD version bytes for BIP-0032
+//	https://github.com/satoshilabs/slips/blob/master/slip-0132.md
 func RegisterHDKeyID(hdPublicKeyID []byte, hdPrivateKeyID []byte) error {
 	if len(hdPublicKeyID) != 4 || len(hdPrivateKeyID) != 4 {
 		return ErrInvalidHDKeyID

claimtrie/claimtrie.go

@@ -4,9 +4,7 @@ import (
 	"bytes"
 	"fmt"
 	"path/filepath"
-	"runtime"
 	"sort"
-	"sync"
 
 	"github.com/pkg/errors"
 
@@ -249,17 +247,17 @@ func (ct *ClaimTrie) AppendBlock(temporary bool) error {
 	names = append(names, expirations...)
 	names = removeDuplicates(names)
 
-	nhns := ct.makeNameHashNext(names, false, nil)
-	for nhn := range nhns {
+	for _, name := range names {
 
-		ct.merkleTrie.Update(nhn.Name, nhn.Hash, true)
-		if nhn.Next <= 0 {
+		hash, next := ct.nodeManager.Hash(name)
+		ct.merkleTrie.Update(name, hash, true)
+		if next <= 0 {
 			continue
 		}
 
-		newName := normalization.NormalizeIfNecessary(nhn.Name, nhn.Next)
+		newName := normalization.NormalizeIfNecessary(name, next)
 		updateNames = append(updateNames, newName)
-		updateHeights = append(updateHeights, nhn.Next)
+		updateHeights = append(updateHeights, next)
 	}
 	if !temporary && len(updateNames) > 0 {
 		err = ct.temporalRepo.SetNodesAt(updateNames, updateHeights)
@@ -333,35 +331,52 @@ func (ct *ClaimTrie) ResetHeight(height int32) error {
 	if passedHashFork {
 		names = nil // force them to reconsider all names
 	}
+
+	var fullRebuildRequired bool
+
 	err = ct.merkleTrie.SetRoot(hash)
 	if err == merkletrie.ErrFullRebuildRequired {
+		fullRebuildRequired = true
+	} else if err != nil {
+		return errors.Wrapf(err, "setRoot")
+	}
+
+	if fullRebuildRequired {
 		ct.runFullTrieRebuild(names, nil)
 	}
 
 	if !ct.MerkleHash().IsEqual(hash) {
-		return errors.Errorf("unable to restore the hash at height %d", height)
+		return errors.Errorf("unable to restore the hash at height %d"+
+			" (fullTriedRebuilt: %t)", height, fullRebuildRequired)
 	}
 
 	return errors.WithStack(ct.blockRepo.Delete(height+1, oldHeight))
 }
 
 func (ct *ClaimTrie) runFullTrieRebuild(names [][]byte, interrupt <-chan struct{}) {
-	var nhns chan NameHashNext
 	if names == nil {
 		node.Log("Building the entire claim trie in RAM...")
 		ct.claimLogger = newClaimProgressLogger("Processed", node.GetLogger())
-		nhns = ct.makeNameHashNext(nil, true, interrupt)
-	} else {
-		ct.claimLogger = nil
-		nhns = ct.makeNameHashNext(names, false, interrupt)
-	}
 
-	for nhn := range nhns {
-		ct.merkleTrie.Update(nhn.Name, nhn.Hash, false)
-		if ct.claimLogger != nil {
-			ct.claimLogger.LogName(nhn.Name)
+		ct.nodeManager.IterateNames(func(name []byte) bool {
+			if interruptRequested(interrupt) {
+				return false
+			}
+			clone := make([]byte, len(name))
+			copy(clone, name)
+			hash, _ := ct.nodeManager.Hash(clone)
+			ct.merkleTrie.Update(clone, hash, false)
+			ct.claimLogger.LogName(name)
+			return true
+		})
+
+	} else {
+		for _, name := range names {
+			hash, _ := ct.nodeManager.Hash(name)
+			ct.merkleTrie.Update(name, hash, false)
 		}
 	}
+
 }
 
 // MerkleHash returns the Merkle Hash of the claimTrie.
@@ -427,12 +442,6 @@ func (ct *ClaimTrie) FlushToDisk() {
 	}
 }
 
-type NameHashNext struct {
-	Name []byte
-	Hash *chainhash.Hash
-	Next int32
-}
-
 func interruptRequested(interrupted <-chan struct{}) bool {
 	select {
 	case <-interrupted: // should never block on nil
@@ -442,53 +451,3 @@ func interruptRequested(interrupted <-chan struct{}) bool {
 
 	return false
 }
-
-func (ct *ClaimTrie) makeNameHashNext(names [][]byte, all bool, interrupt <-chan struct{}) chan NameHashNext {
-	inputs := make(chan []byte, 512)
-	outputs := make(chan NameHashNext, 512)
-
-	var wg sync.WaitGroup
-	hashComputationWorker := func() {
-		for name := range inputs {
-			hash, next := ct.nodeManager.Hash(name)
-			outputs <- NameHashNext{name, hash, next}
-		}
-		wg.Done()
-	}
-
-	threads := int(0.8 * float32(runtime.GOMAXPROCS(0)))
-	if threads < 1 {
-		threads = 1
-	}
-	for threads > 0 {
-		threads--
-		wg.Add(1)
-		go hashComputationWorker()
-	}
-	go func() {
-		if all {
-			ct.nodeManager.IterateNames(func(name []byte) bool {
-				if interruptRequested(interrupt) {
-					return false
-				}
-				clone := make([]byte, len(name))
-				copy(clone, name) // iteration name buffer is reused on future loops
-				inputs <- clone
-				return true
-			})
-		} else {
-			for _, name := range names {
-				if interruptRequested(interrupt) {
-					break
-				}
-				inputs <- name
-			}
-		}
-		close(inputs)
-	}()
-	go func() {
-		wg.Wait()
-		close(outputs)
-	}()
-	return outputs
-}

claimtrie/logger.go

@@ -26,7 +26,8 @@ type claimProgressLogger struct {
 
 // newClaimProgressLogger returns a new name progress logger.
 // The progress message is templated as follows:
-//  {progressAction} {numProcessed} {names|name} in the last {timePeriod} (total {totalProcessed})
+//
+//	{progressAction} {numProcessed} {names|name} in the last {timePeriod} (total {totalProcessed})
 func newClaimProgressLogger(progressMessage string, logger btclog.Logger) *claimProgressLogger {
 	return &claimProgressLogger{
 		lastLogNameTime: time.Now(),

claimtrie/merkletrie/vertex.go

@@ -17,10 +17,11 @@ func newVertex(hash *chainhash.Hash) *vertex {
 // TODO: more professional to use msgpack here?
 
 // nbuf decodes the on-disk format of a node, which has the following form:
-//   ch(1B) hash(32B)
-//   ...
-//   ch(1B) hash(32B)
-//   vhash(32B)
+//
+//	ch(1B) hash(32B)
+//	...
+//	ch(1B) hash(32B)
+//	vhash(32B)
 type nbuf []byte
 
 func (nb nbuf) entries() int {

claimtrie/node/cache.go

@@ -2,7 +2,6 @@ package node
 
 import (
 	"container/list"
-	"sync"
 
 	"github.com/lbryio/lbcd/claimtrie/change"
 )
@@ -17,16 +16,12 @@ type cacheLeaf struct {
 type Cache struct {
 	nodes map[string]*cacheLeaf
 	order *list.List
-	mtx   sync.Mutex
 	limit int
 }
 
 func (nc *Cache) insert(name []byte, n *Node, height int32) {
 	key := string(name)
 
-	nc.mtx.Lock()
-	defer nc.mtx.Unlock()
-
 	existing := nc.nodes[key]
 	if existing != nil {
 		existing.node = n
@@ -49,9 +44,6 @@ func (nc *Cache) insert(name []byte, n *Node, height int32) {
 func (nc *Cache) fetch(name []byte, height int32) (*Node, []change.Change, int32) {
 	key := string(name)
 
-	nc.mtx.Lock()
-	defer nc.mtx.Unlock()
-
 	existing := nc.nodes[key]
 	if existing != nil && existing.height <= height {
 		nc.order.MoveToFront(existing.element)
@@ -61,9 +53,6 @@ func (nc *Cache) fetch(name []byte, height int32) (*Node, []change.Change, int32
 }
 
 func (nc *Cache) addChanges(changes []change.Change, height int32) {
-	nc.mtx.Lock()
-	defer nc.mtx.Unlock()
-
 	for _, c := range changes {
 		key := string(c.Name)
 		existing := nc.nodes[key]
@@ -74,9 +63,6 @@ func (nc *Cache) addChanges(changes []change.Change, height int32) {
 }
 
 func (nc *Cache) drop(names [][]byte) {
-	nc.mtx.Lock()
-	defer nc.mtx.Unlock()
-
 	for _, name := range names {
 		key := string(name)
 		existing := nc.nodes[key]
@@ -89,8 +75,6 @@ func (nc *Cache) drop(names [][]byte) {
 }
 
 func (nc *Cache) clear() {
-	nc.mtx.Lock()
-	defer nc.mtx.Unlock()
 	nc.nodes = map[string]*cacheLeaf{}
 	nc.order = list.New()
 	// we'll let the GC sort out the remains...

claimtrie/node/manager.go

@@ -67,14 +67,16 @@ func (nm *BaseManager) NodeAt(height int32, name []byte) (*Node, error) {
 			return nil, errors.Wrap(err, "in new node")
 		}
 		// TODO: how can we tell what needs to be cached?
-		if nm.tempChanges == nil && height == nm.height && n != nil && (len(changes) > 7 || len(name) < 12) {
+		if nm.tempChanges == nil && height == nm.height && n != nil && (len(changes) > 4 || len(name) < 12) {
 			nm.cache.insert(name, n, height)
 		}
 	} else {
 		if nm.tempChanges != nil { // making an assumption that we only ever have tempChanges for a single block
 			changes = append(changes, nm.tempChanges[string(name)]...)
+			n = n.Clone()
+		} else if height != nm.height {
+			n = n.Clone()
 		}
-		n = n.Clone()
 		updated, err := nm.updateFromChanges(n, changes, height)
 		if err != nil {
 			return nil, errors.Wrap(err, "in update from changes")
@@ -82,7 +84,7 @@ func (nm *BaseManager) NodeAt(height int32, name []byte) (*Node, error) {
 		if !updated {
 			n.AdjustTo(oldHeight, height, name)
 		}
-		if nm.tempChanges == nil && height == nm.height { // TODO: how many changes before we update the cache?
+		if nm.tempChanges == nil && height == nm.height {
 			nm.cache.insert(name, n, height)
 		}
 	}

cmd/lbcctl/config.go

@@ -111,6 +111,8 @@ type config struct {
 	SigNet         bool   `long:"signet" description:"Connect to signet (default RPC server: localhost:49245)"`
 	Wallet         bool   `long:"wallet" description:"Connect to wallet RPC server instead (default: localhost:9244, testnet: localhost:19244, regtest: localhost:29244)"`
 	ShowVersion    bool   `short:"V" long:"version" description:"Display version information and exit"`
+	Timed          bool   `short:"t" long:"timed" description:"Display RPC response time"`
+	Quiet          bool   `short:"q" long:"quiet" description:"Do not output results to stdout"`
 }
 
 // normalizeAddress returns addr with the passed default port appended if
@@ -175,10 +177,10 @@ func cleanAndExpandPath(path string) string {
 // line options.
 //
 // The configuration proceeds as follows:
-// 	1) Start with a default config with sane settings
-// 	2) Pre-parse the command line to check for an alternative config file
-// 	3) Load configuration file overwriting defaults with any specified options
-// 	4) Parse CLI options and overwrite/add any specified options
+//  1. Start with a default config with sane settings
+//  2. Pre-parse the command line to check for an alternative config file
+//  3. Load configuration file overwriting defaults with any specified options
+//  4. Parse CLI options and overwrite/add any specified options
 //
 // The above results in functioning properly without any config settings
 // while still allowing the user to override settings with config files and

cmd/lbcctl/lbcctl.go

@@ -9,6 +9,7 @@ import (
 	"os"
 	"path/filepath"
 	"strings"
+	"time"
 
 	"github.com/lbryio/lbcd/btcjson"
 )
@@ -133,6 +134,8 @@ func main() {
 		os.Exit(1)
 	}
 
+	started := time.Now()
+
 	// Send the JSON-RPC request to the server using the user-specified
 	// connection configuration.
 	result, err := sendPostRequest(marshalledJSON, cfg)
@@ -141,6 +144,16 @@ func main() {
 		os.Exit(1)
 	}
 
+	if cfg.Timed {
+		elapsed := time.Since(started)
+		defer fmt.Fprintf(os.Stderr, "%s\n", elapsed)
+	}
+
+	var output io.Writer = os.Stdout
+	if cfg.Quiet {
+		output = io.Discard
+	}
+
 	// Choose how to display the result based on its type.
 	strResult := string(result)
 	if strings.HasPrefix(strResult, "{") || strings.HasPrefix(strResult, "[") {
@@ -150,7 +163,7 @@ func main() {
 				err)
 			os.Exit(1)
 		}
-		fmt.Println(dst.String())
+		fmt.Fprintln(output, dst.String())
 
 	} else if strings.HasPrefix(strResult, `"`) {
 		var str string
@@ -159,9 +172,9 @@ func main() {
 				err)
 			os.Exit(1)
 		}
-		fmt.Println(str)
+		fmt.Fprintln(output, str)
 
 	} else if strResult != "null" {
-		fmt.Println(strResult)
+		fmt.Fprintln(output, strResult)
 	}
 }

config.go

@@ -409,10 +409,10 @@ func newConfigParser(cfg *config, so *serviceOptions, options flags.Options) *fl
 // line options.
 //
 // The configuration proceeds as follows:
-// 	1) Start with a default config with sane settings
-// 	2) Pre-parse the command line to check for an alternative config file
-// 	3) Load configuration file overwriting defaults with any specified options
-// 	4) Parse CLI options and overwrite/add any specified options
+//  1. Start with a default config with sane settings
+//  2. Pre-parse the command line to check for an alternative config file
+//  3. Load configuration file overwriting defaults with any specified options
+//  4. Parse CLI options and overwrite/add any specified options
 //
 // The above results in lbcd functioning properly without any config settings
 // while still allowing the user to override settings with config files and
@@ -977,13 +977,8 @@ func loadConfig() (*config, []string, error) {
 	// Only allow TLS to be disabled if the RPC is bound to localhost
 	// addresses.
 	if !cfg.DisableRPC && cfg.DisableTLS {
-		allowedTLSListeners := map[string]struct{}{
-			"localhost": {},
-			"127.0.0.1": {},
-			"::1":       {},
-		}
 		for _, addr := range cfg.RPCListeners {
-			host, _, err := net.SplitHostPort(addr)
+			_, _, err := net.SplitHostPort(addr)
 			if err != nil {
 				str := "%s: RPC listen interface '%s' is " +
 					"invalid: %v"
@@ -992,15 +987,6 @@ func loadConfig() (*config, []string, error) {
 				fmt.Fprintln(os.Stderr, usageMessage)
 				return nil, nil, err
 			}
-			if _, ok := allowedTLSListeners[host]; !ok {
-				str := "%s: the --notls option may not be used " +
-					"when binding RPC to non localhost " +
-					"addresses: %s"
-				err := fmt.Errorf(str, funcName, addr)
-				fmt.Fprintln(os.Stderr, err)
-				fmt.Fprintln(os.Stderr, usageMessage)
-				return nil, nil, err
-			}
 		}
 	}
 

config_test.go

@@ -20,7 +20,6 @@ var (
 // parameters which are command-line only. These fields are copied line-by-line
 // from "config" struct in "config.go", and the field names, types, and tags must
 // match for the test to work.
-//
 type configCmdLineOnly struct {
 	ConfigFile          string   `short:"C" long:"configfile" description:"Path to configuration file"`
 	DbType              string   `long:"dbtype" description:"Database backend to use for the Block Chain"`

connmgr/doc.go

@@ -5,7 +5,7 @@
 /*
 Package connmgr implements a generic Bitcoin network connection manager.
 
-Connection Manager Overview
+# Connection Manager Overview
 
 Connection Manager handles all the general connection concerns such as
 maintaining a set number of outbound connections, sourcing peers, banning,

contrib/showminer.sh

@@ -0,0 +1,42 @@
+#! /bin/bash
+
+read -r -d '' help << EOM
+$0 - helper script for displaying miner of a mined block.
+
+Options:
+
+    -h Display this message.
+
+    --height Specify blockheight.
+    --hash Specify blockhash.
+EOM
+
+while getopts ":h-:" optchar; do
+	case "${optchar}" in
+		-)
+			case "${OPTARG}" in
+				hash)
+					blockhash="${!OPTIND}"; OPTIND=$(( $OPTIND + 1 ))
+					;;
+				height)
+					blockheight="${!OPTIND}"; OPTIND=$(( $OPTIND + 1 ))
+					blockhash=$(lbcctl getblockhash ${blockheight})
+					;;
+				*) echo "Unknown long option --${OPTARG}" >&2; exit -2 ;;
+                        esac
+        ;;
+		h) printf "${help}\n\n"; exit 2;;
+		*) echo "Unknown option -${OPTARG}" >&2; exit -2;;
+	esac
+done
+
+
+block=$(lbcctl getblock $blockhash)
+blockheight=$(lbcctl getblock $blockhash | jq -r .height)
+
+coinbase_txid=$(echo ${block} | jq -r '.tx[0]')
+coinbase_raw=$(lbcctl getrawtransaction ${coinbase_txid} 1)
+coinbase=$(echo ${coinbase_raw} | jq '.vin[0].coinbase')
+miner=$(echo ${coinbase} | grep -o '2f.*2f' | xxd -r -p | strings)
+
+echo ${blockheight}: ${blockhash}: ${miner}

database/doc.go

@@ -5,7 +5,7 @@
 /*
 Package database provides a block and metadata storage database.
 
-Overview
+# Overview
 
 As of Feb 2016, there are over 400,000 blocks in the Bitcoin block chain and
 and over 112 million transactions (which turns out to be over 60GB of data).
@@ -18,15 +18,15 @@ storage, and strict checksums in key areas to ensure data integrity.
 
 A quick overview of the features database provides are as follows:
 
- - Key/value metadata store
- - Bitcoin block storage
- - Efficient retrieval of block headers and regions (transactions, scripts, etc)
- - Read-only and read-write transactions with both manual and managed modes
- - Nested buckets
- - Supports registration of backend databases
- - Comprehensive test coverage
+  - Key/value metadata store
+  - Bitcoin block storage
+  - Efficient retrieval of block headers and regions (transactions, scripts, etc)
+  - Read-only and read-write transactions with both manual and managed modes
+  - Nested buckets
+  - Supports registration of backend databases
+  - Comprehensive test coverage
 
-Database
+# Database
 
 The main entry point is the DB interface.  It exposes functionality for
 transactional-based access and storage of metadata and block data.  It is
@@ -43,14 +43,14 @@ The Begin function provides an unmanaged transaction while the View and Update
 functions provide a managed transaction.  These are described in more detail
 below.
 
-Transactions
+# Transactions
 
 The Tx interface provides facilities for rolling back or committing changes that
 took place while the transaction was active.  It also provides the root metadata
 bucket under which all keys, values, and nested buckets are stored.  A
 transaction can either be read-only or read-write and managed or unmanaged.
 
-Managed versus Unmanaged Transactions
+# Managed versus Unmanaged Transactions
 
 A managed transaction is one where the caller provides a function to execute
 within the context of the transaction and the commit or rollback is handled
@@ -63,7 +63,7 @@ call Commit or Rollback when they are finished with it.  Leaving transactions
 open for long periods of time can have several adverse effects, so it is
 recommended that managed transactions are used instead.
 
-Buckets
+# Buckets
 
 The Bucket interface provides the ability to manipulate key/value pairs and
 nested buckets as well as iterate through them.
@@ -73,7 +73,7 @@ CreateBucket, CreateBucketIfNotExists, and DeleteBucket functions work with
 buckets.  The ForEach function allows the caller to provide a function to be
 called with each key/value pair and nested bucket in the current bucket.
 
-Metadata Bucket
+# Metadata Bucket
 
 As discussed above, all of the functions which are used to manipulate key/value
 pairs and nested buckets exist on the Bucket interface.  The root metadata
@@ -81,7 +81,7 @@ bucket is the upper-most bucket in which data is stored and is created at the
 same time as the database.  Use the Metadata function on the Tx interface
 to retrieve it.
 
-Nested Buckets
+# Nested Buckets
 
 The CreateBucket and CreateBucketIfNotExists functions on the Bucket interface
 provide the ability to create an arbitrary number of nested buckets.  It is

database/ffldb/blockio.go

@@ -622,8 +622,8 @@ func (s *blockStore) syncBlocks() error {
 // were partially written.
 //
 // There are effectively two scenarios to consider here:
-//   1) Transient write failures from which recovery is possible
-//   2) More permanent failures such as hard disk death and/or removal
+//  1. Transient write failures from which recovery is possible
+//  2. More permanent failures such as hard disk death and/or removal
 //
 // In either case, the write cursor will be repositioned to the old block file
 // offset regardless of any other errors that occur while attempting to undo

database/ffldb/doc.go

@@ -10,7 +10,7 @@ This driver is the recommended driver for use with lbcd.  It makes use leveldb
 for the metadata, flat files for block storage, and checksums in key areas to
 ensure data integrity.
 
-Usage
+# Usage
 
 This package is a driver to the database package and provides the database type
 of "ffldb".  The parameters the Open and Create functions take are the

database/internal/treap/treapiter.go

@@ -318,13 +318,14 @@ func (iter *Iterator) ForceReseek() {
 // unexpected keys and/or values.
 //
 // For example:
-//   iter := t.Iterator(nil, nil)
-//   for iter.Next() {
-//   	if someCondition {
-//   		t.Delete(iter.Key())
-//   		iter.ForceReseek()
-//   	}
-//   }
+//
+//	iter := t.Iterator(nil, nil)
+//	for iter.Next() {
+//		if someCondition {
+//			t.Delete(iter.Key())
+//			iter.ForceReseek()
+//		}
+//	}
 func (t *Mutable) Iterator(startKey, limitKey []byte) *Iterator {
 	iter := &Iterator{
 		t:        t,

doc.go

@@ -18,144 +18,144 @@ on Windows.  The -C (--configfile) flag, as shown below, can be used to override
 this location.
 
 Usage:
-  lbcd [OPTIONS]
+
+	lbcd [OPTIONS]
 
 Application Options:
-      --addcheckpoint=        Add a custom checkpoint.  Format:
-                              '<height>:<hash>'
-  -a, --addpeer=              Add a peer to connect with at startup
-      --addrindex             Maintain a full address-based transaction index
-                              which makes the searchrawtransactions RPC
-                              available
-      --banduration=          How long to ban misbehaving peers.  Valid time
-                              units are {s, m, h}.  Minimum 1 second (default:
-                              24h0m0s)
-      --banthreshold=         Maximum allowed ban score before disconnecting
-                              and banning misbehaving peers. (default: 100)
-      --blockmaxsize=         Maximum block size in bytes to be used when
-                              creating a block (default: 750000)
-      --blockminsize=         Mininum block size in bytes to be used when
-                              creating a block
-      --blockmaxweight=       Maximum block weight to be used when creating a
-                              block (default: 3000000)
-      --blockminweight=       Mininum block weight to be used when creating a
-                              block
-      --blockprioritysize=    Size in bytes for high-priority/low-fee
-                              transactions when creating a block (default:
-                              50000)
-      --blocksonly            Do not accept transactions from remote peers.
-  -C, --configfile=           Path to configuration file
-      --connect=              Connect only to the specified peers at startup
-      --cpuprofile=           Write CPU profile to the specified file
-  -b, --datadir=              Directory to store data
-      --dbtype=               Database backend to use for the Block Chain
-                              (default: ffldb)
-  -d, --debuglevel=           Logging level for all subsystems {trace, debug,
-                              info, warn, error, critical} -- You may also
-                              specify
-                              <subsystem>=<level>,<subsystem2>=<level>,... to
-                              set the log level for individual subsystems --
-                              Use show to list available subsystems (default:
-                              info)
-      --dropaddrindex         Deletes the address-based transaction index from
-                              the database on start up and then exits.
-      --dropcfindex           Deletes the index used for committed filtering
-                              (CF) support from the database on start up and
-                              then exits.
-      --droptxindex           Deletes the hash-based transaction index from the
-                              database on start up and then exits.
-      --externalip=           Add an ip to the list of local addresses we claim
-                              to listen on to peers
-      --generate              Generate (mine) bitcoins using the CPU
-      --limitfreerelay=       Limit relay of transactions with no transaction
-                              fee to the given amount in thousands of bytes per
-                              minute (default: 15)
-      --listen=               Add an interface/port to listen for connections
-                              (default all interfaces port: 9246, testnet:
-                              19246, regtest: 29246, signet: 39246)
-      --logdir=               Directory to log output
-      --maxorphantx=          Max number of orphan transactions to keep in
-                              memory (default: 100)
-      --maxpeers=             Max number of inbound and outbound peers
-                              (default: 125)
-      --memprofile=           Write memory profile to the specified file
-      --miningaddr=           Add the specified payment address to the list of
-                              addresses to use for generated blocks -- At least
-                              one address is required if the generate option is
-                              set
-      --minrelaytxfee=        The minimum transaction fee in BTC/kB to be
-                              considered a non-zero fee. (default: 1e-05)
-      --nobanning             Disable banning of misbehaving peers
-      --nocfilters            Disable committed filtering (CF) support
-      --nocheckpoints         Disable built-in checkpoints.  Don't do this
-                              unless you know what you're doing.
-      --nodnsseed             Disable DNS seeding for peers
-      --nolisten              Disable listening for incoming connections --
-                              NOTE: Listening is automatically disabled if the
-                              --connect or --proxy options are used without
-                              also specifying listen interfaces via --listen
-      --noonion               Disable connecting to tor hidden services
-      --nopeerbloomfilters    Disable bloom filtering support
-      --norelaypriority       Do not require free or low-fee transactions to
-                              have high priority for relaying
-      --norpc                 Disable built-in RPC server -- NOTE: The RPC
-                              server is disabled by default if no
-                              rpcuser/rpcpass or rpclimituser/rpclimitpass is
-                              specified
-      --notls                 Disable TLS for the RPC server -- NOTE: This is
-                              only allowed if the RPC server is bound to
-                              localhost
-      --onion=                Connect to tor hidden services via SOCKS5 proxy
-                              (eg. 127.0.0.1:9050)
-      --onionpass=            Password for onion proxy server
-      --onionuser=            Username for onion proxy server
-      --profile=              Enable HTTP profiling on given port -- NOTE port
-                              must be between 1024 and 65536
-      --proxy=                Connect via SOCKS5 proxy (eg. 127.0.0.1:9050)
-      --proxypass=            Password for proxy server
-      --proxyuser=            Username for proxy server
-      --regtest               Use the regression test network
-      --rejectnonstd          Reject non-standard transactions regardless of
-                              the default settings for the active network.
-      --relaynonstd           Relay non-standard transactions regardless of the
-                              default settings for the active network.
-      --rpccert=              File containing the certificate file
-      --rpckey=               File containing the certificate key
-      --rpclimitpass=         Password for limited RPC connections
-      --rpclimituser=         Username for limited RPC connections
-      --rpclisten=            Add an interface/port to listen for RPC
-                              connections (default port: 9245, testnet: 19245, regtest: 29245)
-      --rpcmaxclients=        Max number of RPC clients for standard
-                              connections (default: 10)
-      --rpcmaxconcurrentreqs= Max number of concurrent RPC requests that may be
-                              processed concurrently (default: 20)
-      --rpcmaxwebsockets=     Max number of RPC websocket connections (default:
-                              25)
-      --rpcquirks             Mirror some JSON-RPC quirks of Bitcoin Core --
-                              NOTE: Discouraged unless interoperability issues
-                              need to be worked around
-  -P, --rpcpass=              Password for RPC connections
-  -u, --rpcuser=              Username for RPC connections
-      --sigcachemaxsize=      The maximum number of entries in the signature
-                              verification cache (default: 100000)
-      --simnet                Use the simulation test network
-      --testnet               Use the test network
-      --torisolation          Enable Tor stream isolation by randomizing user
-                              credentials for each connection.
-      --trickleinterval=      Minimum time between attempts to send new
-                              inventory to a connected peer (default: 10s)
-      --txindex               Maintain a full hash-based transaction index
-                              which makes all transactions available via the
-                              getrawtransaction RPC
-      --uacomment=            Comment to add to the user agent -- See BIP 14
-                              for more information.
-      --upnp                  Use UPnP to map our listening port outside of NAT
-  -V, --version               Display version information and exit
-      --whitelist=            Add an IP network or IP that will not be banned.
-                              (eg. 192.168.1.0/24 or ::1)
+
+	    --addcheckpoint=        Add a custom checkpoint.  Format:
+	                            '<height>:<hash>'
+	-a, --addpeer=              Add a peer to connect with at startup
+	    --addrindex             Maintain a full address-based transaction index
+	                            which makes the searchrawtransactions RPC
+	                            available
+	    --banduration=          How long to ban misbehaving peers.  Valid time
+	                            units are {s, m, h}.  Minimum 1 second (default:
+	                            24h0m0s)
+	    --banthreshold=         Maximum allowed ban score before disconnecting
+	                            and banning misbehaving peers. (default: 100)
+	    --blockmaxsize=         Maximum block size in bytes to be used when
+	                            creating a block (default: 750000)
+	    --blockminsize=         Mininum block size in bytes to be used when
+	                            creating a block
+	    --blockmaxweight=       Maximum block weight to be used when creating a
+	                            block (default: 3000000)
+	    --blockminweight=       Mininum block weight to be used when creating a
+	                            block
+	    --blockprioritysize=    Size in bytes for high-priority/low-fee
+	                            transactions when creating a block (default:
+	                            50000)
+	    --blocksonly            Do not accept transactions from remote peers.
+	-C, --configfile=           Path to configuration file
+	    --connect=              Connect only to the specified peers at startup
+	    --cpuprofile=           Write CPU profile to the specified file
+	-b, --datadir=              Directory to store data
+	    --dbtype=               Database backend to use for the Block Chain
+	                            (default: ffldb)
+	-d, --debuglevel=           Logging level for all subsystems {trace, debug,
+	                            info, warn, error, critical} -- You may also
+	                            specify
+	                            <subsystem>=<level>,<subsystem2>=<level>,... to
+	                            set the log level for individual subsystems --
+	                            Use show to list available subsystems (default:
+	                            info)
+	    --dropaddrindex         Deletes the address-based transaction index from
+	                            the database on start up and then exits.
+	    --dropcfindex           Deletes the index used for committed filtering
+	                            (CF) support from the database on start up and
+	                            then exits.
+	    --droptxindex           Deletes the hash-based transaction index from the
+	                            database on start up and then exits.
+	    --externalip=           Add an ip to the list of local addresses we claim
+	                            to listen on to peers
+	    --generate              Generate (mine) bitcoins using the CPU
+	    --limitfreerelay=       Limit relay of transactions with no transaction
+	                            fee to the given amount in thousands of bytes per
+	                            minute (default: 15)
+	    --listen=               Add an interface/port to listen for connections
+	                            (default all interfaces port: 9246, testnet:
+	                            19246, regtest: 29246, signet: 39246)
+	    --logdir=               Directory to log output
+	    --maxorphantx=          Max number of orphan transactions to keep in
+	                            memory (default: 100)
+	    --maxpeers=             Max number of inbound and outbound peers
+	                            (default: 125)
+	    --memprofile=           Write memory profile to the specified file
+	    --miningaddr=           Add the specified payment address to the list of
+	                            addresses to use for generated blocks -- At least
+	                            one address is required if the generate option is
+	                            set
+	    --minrelaytxfee=        The minimum transaction fee in BTC/kB to be
+	                            considered a non-zero fee. (default: 1e-05)
+	    --nobanning             Disable banning of misbehaving peers
+	    --nocfilters            Disable committed filtering (CF) support
+	    --nocheckpoints         Disable built-in checkpoints.  Don't do this
+	                            unless you know what you're doing.
+	    --nodnsseed             Disable DNS seeding for peers
+	    --nolisten              Disable listening for incoming connections --
+	                            NOTE: Listening is automatically disabled if the
+	                            --connect or --proxy options are used without
+	                            also specifying listen interfaces via --listen
+	    --noonion               Disable connecting to tor hidden services
+	    --nopeerbloomfilters    Disable bloom filtering support
+	    --norelaypriority       Do not require free or low-fee transactions to
+	                            have high priority for relaying
+	    --norpc                 Disable built-in RPC server -- NOTE: The RPC
+	                            server is disabled by default if no
+	                            rpcuser/rpcpass or rpclimituser/rpclimitpass is
+	                            specified
+	    --notls                 Disable TLS for the RPC server
+	    --onion=                Connect to tor hidden services via SOCKS5 proxy
+	                            (eg. 127.0.0.1:9050)
+	    --onionpass=            Password for onion proxy server
+	    --onionuser=            Username for onion proxy server
+	    --profile=              Enable HTTP profiling on given port -- NOTE port
+	                            must be between 1024 and 65536
+	    --proxy=                Connect via SOCKS5 proxy (eg. 127.0.0.1:9050)
+	    --proxypass=            Password for proxy server
+	    --proxyuser=            Username for proxy server
+	    --regtest               Use the regression test network
+	    --rejectnonstd          Reject non-standard transactions regardless of
+	                            the default settings for the active network.
+	    --relaynonstd           Relay non-standard transactions regardless of the
+	                            default settings for the active network.
+	    --rpccert=              File containing the certificate file
+	    --rpckey=               File containing the certificate key
+	    --rpclimitpass=         Password for limited RPC connections
+	    --rpclimituser=         Username for limited RPC connections
+	    --rpclisten=            Add an interface/port to listen for RPC
+	                            connections (default port: 9245, testnet: 19245, regtest: 29245)
+	    --rpcmaxclients=        Max number of RPC clients for standard
+	                            connections (default: 10)
+	    --rpcmaxconcurrentreqs= Max number of concurrent RPC requests that may be
+	                            processed concurrently (default: 20)
+	    --rpcmaxwebsockets=     Max number of RPC websocket connections (default:
+	                            25)
+	    --rpcquirks             Mirror some JSON-RPC quirks of Bitcoin Core --
+	                            NOTE: Discouraged unless interoperability issues
+	                            need to be worked around
+	-P, --rpcpass=              Password for RPC connections
+	-u, --rpcuser=              Username for RPC connections
+	    --sigcachemaxsize=      The maximum number of entries in the signature
+	                            verification cache (default: 100000)
+	    --simnet                Use the simulation test network
+	    --testnet               Use the test network
+	    --torisolation          Enable Tor stream isolation by randomizing user
+	                            credentials for each connection.
+	    --trickleinterval=      Minimum time between attempts to send new
+	                            inventory to a connected peer (default: 10s)
+	    --txindex               Maintain a full hash-based transaction index
+	                            which makes all transactions available via the
+	                            getrawtransaction RPC
+	    --uacomment=            Comment to add to the user agent -- See BIP 14
+	                            for more information.
+	    --upnp                  Use UPnP to map our listening port outside of NAT
+	-V, --version               Display version information and exit
+	    --whitelist=            Add an IP network or IP that will not be banned.
+	                            (eg. 192.168.1.0/24 or ::1)
 
 Help Options:
-  -h, --help           Show this help message
 
+	-h, --help           Show this help message
 */
 package main

fees/doc.go

@@ -7,11 +7,11 @@ Package fees provides decred-specific methods for tracking and estimating fee
 rates for new transactions to be mined into the network. Fee rate estimation has
 two main goals:
 
-- Ensuring transactions are mined within a target _confirmation range_
-  (expressed in blocks);
-- Attempting to minimize fees while maintaining be above restriction.
+  - Ensuring transactions are mined within a target _confirmation range_
+    (expressed in blocks);
+  - Attempting to minimize fees while maintaining be above restriction.
 
-Preliminaries
+# Preliminaries
 
 There are two main regimes against which fee estimation needs to be evaluated
 according to how full blocks being mined are (and consequently how important fee
@@ -39,7 +39,7 @@ The current approach to implement this estimation is based on bitcoin core's
 algorithm. References [1] and [2] provide a high level description of how it
 works there. Actual code is linked in references [3] and [4].
 
-Outline of the Algorithm
+# Outline of the Algorithm
 
 The algorithm is currently based in fee estimation as used in v0.14 of bitcoin
 core (which is also the basis for the v0.15+ method). A more comprehensive
@@ -54,31 +54,31 @@ The basic algorithm is as follows (as executed by a single full node):
 
 Stats building stage:
 
-- For each transaction observed entering mempool, record the block at which it
-  was first seen
-- For each mined transaction which was previously observed to enter the mempool,
-  record how long (in blocks) it took to be mined and its fee rate
-- Group mined transactions into fee rate _buckets_  and _confirmation ranges_,
-  creating a table of how many transactions were mined at each confirmation
-  range and fee rate bucket and their total committed fee
-- Whenever a new block is mined, decay older transactions to account for a
-  dynamic fee environment
+  - For each transaction observed entering mempool, record the block at which it
+    was first seen
+  - For each mined transaction which was previously observed to enter the mempool,
+    record how long (in blocks) it took to be mined and its fee rate
+  - Group mined transactions into fee rate _buckets_  and _confirmation ranges_,
+    creating a table of how many transactions were mined at each confirmation
+    range and fee rate bucket and their total committed fee
+  - Whenever a new block is mined, decay older transactions to account for a
+    dynamic fee environment
 
 Estimation stage:
 
-- Input a target confirmation range (how many blocks to wait for the tx to be
-  mined)
-- Starting at the highest fee bucket, look for buckets where the chance of
-  confirmation within the desired confirmation window is > 95%
-- Average all such buckets to get the estimated fee rate
+  - Input a target confirmation range (how many blocks to wait for the tx to be
+    mined)
+  - Starting at the highest fee bucket, look for buckets where the chance of
+    confirmation within the desired confirmation window is > 95%
+  - Average all such buckets to get the estimated fee rate
 
-Simulation
+# Simulation
 
 Development of the estimator was originally performed and simulated using the
 code in [5]. Simulation of the current code can be performed by using the
 dcrfeesim tool available in [6].
 
-Acknowledgements
+# Acknowledgements
 
 Thanks to @davecgh for providing the initial review of the results and the
 original developers of the bitcoin core code (the brunt of which seems to have

go.mod

@@ -1,6 +1,6 @@
 module github.com/lbryio/lbcd
 
-go 1.18
+go 1.19
 
 require (
 	github.com/btcsuite/btclog v0.0.0-20170628155309-84c8d2346e9f
@@ -14,7 +14,7 @@ require (
 	github.com/felixge/fgprof v0.9.2
 	github.com/jessevdk/go-flags v1.5.0
 	github.com/jrick/logrotate v1.0.0
-	github.com/lbryio/lbcutil v1.0.202-rc3
+	github.com/lbryio/lbcutil v1.0.202
 	github.com/pkg/errors v0.9.1
 	github.com/shirou/gopsutil/v3 v3.22.4
 	github.com/spf13/cobra v1.1.3

go.sum

@@ -284,8 +284,8 @@ github.com/kr/text v0.2.0/go.mod h1:eLer722TekiGuMkidMxC/pM04lWEeraHUUmBw8l2grE=
 github.com/labstack/echo/v4 v4.1.11/go.mod h1:i541M3Fj6f76NZtHSj7TXnyM8n2gaodfvfxNnFqi74g=
 github.com/labstack/echo/v4 v4.5.0/go.mod h1:czIriw4a0C1dFun+ObrXp7ok03xON0N1awStJ6ArI7Y=
 github.com/labstack/gommon v0.3.0/go.mod h1:MULnywXg0yavhxWKc+lOruYdAhDwPK9wf0OL7NoOu+k=
-github.com/lbryio/lbcutil v1.0.202-rc3 h1:J7zYnIj3iN/ndPYKqMKBukLaLM1GhCEaiaMOYIMdUCU=
-github.com/lbryio/lbcutil v1.0.202-rc3/go.mod h1:LGPtVBBzh4cFXfLFb8ginlFcbA2QwumLNFd0yk/as2o=
+github.com/lbryio/lbcutil v1.0.202 h1:L0aRMs2bdCUAicD8Xe4NmUEvevDDea3qkIpCSACnftI=
+github.com/lbryio/lbcutil v1.0.202/go.mod h1:LGPtVBBzh4cFXfLFb8ginlFcbA2QwumLNFd0yk/as2o=
 github.com/lufia/plan9stats v0.0.0-20211012122336-39d0f177ccd0/go.mod h1:zJYVVT2jmtg6P3p1VtQj7WsuWi/y4VnjVBn7F8KPB3I=
 github.com/lufia/plan9stats v0.0.0-20220517141722-cf486979b281 h1:aczX6NMOtt6L4YT0fQvKkDK6LZEtdOso9sUH89V1+P0=
 github.com/lufia/plan9stats v0.0.0-20220517141722-cf486979b281/go.mod h1:lc+czkgO/8F7puNki5jk8QyujbfK1LOT7Wl0ON2hxyk=

integration/bip0009_test.go

@@ -282,19 +282,20 @@ func testBIP0009(t *testing.T, forkKey string, deploymentID uint32) {
 // - Assert the chain height is 0 and the state is ThresholdDefined
 // - Generate 1 fewer blocks than needed to reach the first state transition
 //   - Assert chain height is expected and state is still ThresholdDefined
+//
 // - Generate 1 more block to reach the first state transition
 //   - Assert chain height is expected and state moved to ThresholdStarted
-// - Generate enough blocks to reach the next state transition window, but only
-//   signal support in 1 fewer than the required number to achieve
-//   ThresholdLockedIn
+//   - Generate enough blocks to reach the next state transition window, but only
+//     signal support in 1 fewer than the required number to achieve
+//     ThresholdLockedIn
 //   - Assert chain height is expected and state is still ThresholdStarted
-// - Generate enough blocks to reach the next state transition window with only
-//   the exact number of blocks required to achieve locked in status signalling
-//   support.
+//   - Generate enough blocks to reach the next state transition window with only
+//     the exact number of blocks required to achieve locked in status signalling
+//     support.
 //   - Assert chain height is expected and state moved to ThresholdLockedIn
-// - Generate 1 fewer blocks than needed to reach the next state transition
+//   - Generate 1 fewer blocks than needed to reach the next state transition
 //   - Assert chain height is expected and state is still ThresholdLockedIn
-// - Generate 1 more block to reach the next state transition
+//   - Generate 1 more block to reach the next state transition
 //   - Assert chain height is expected and state moved to ThresholdActive
 func TestBIP0009(t *testing.T) {
 	t.Parallel()
@@ -309,11 +310,14 @@ func TestBIP0009(t *testing.T) {
 // Overview:
 // - Generate block 1
 //   - Assert bit is NOT set (ThresholdDefined)
+//
 // - Generate enough blocks to reach first state transition
 //   - Assert bit is NOT set for block prior to state transition
 //   - Assert bit is set for block at state transition (ThresholdStarted)
+//
 // - Generate enough blocks to reach second state transition
 //   - Assert bit is set for block at state transition (ThresholdLockedIn)
+//
 // - Generate enough blocks to reach third state transition
 //   - Assert bit is set for block prior to state transition (ThresholdLockedIn)
 //   - Assert bit is NOT set for block at state transition (ThresholdActive)

integration/csv_fork_test.go

@@ -95,17 +95,22 @@ func makeTestOutput(r *rpctest.Harness, t *testing.T,
 // them.
 //
 // Overview:
-//  - Pre soft-fork:
-//    - Transactions with non-final lock-times from the PoV of MTP should be
-//      rejected from the mempool.
-//    - Transactions within non-final MTP based lock-times should be accepted
-//      in valid blocks.
 //
-//  - Post soft-fork:
-//    - Transactions with non-final lock-times from the PoV of MTP should be
-//      rejected from the mempool and when found within otherwise valid blocks.
-//    - Transactions with final lock-times from the PoV of MTP should be
-//      accepted to the mempool and mined in future block.
+//   - Pre soft-fork:
+//
+//   - Transactions with non-final lock-times from the PoV of MTP should be
+//     rejected from the mempool.
+//
+//   - Transactions within non-final MTP based lock-times should be accepted
+//     in valid blocks.
+//
+//   - Post soft-fork:
+//
+//   - Transactions with non-final lock-times from the PoV of MTP should be
+//     rejected from the mempool and when found within otherwise valid blocks.
+//
+//   - Transactions with final lock-times from the PoV of MTP should be
+//     accepted to the mempool and mined in future block.
 func TestBIP0113Activation(t *testing.T) {
 	t.Parallel()
 
@@ -391,13 +396,13 @@ func assertTxInBlock(r *rpctest.Harness, t *testing.T, blockHash *chainhash.Hash
 // 112 and BIP 68 rule-set after the activation of the CSV-package soft-fork.
 //
 // Overview:
-//  - Pre soft-fork:
-//    - A transaction spending a CSV output validly should be rejected from the
-//    mempool, but accepted in a valid generated block including the
-//    transaction.
-//  - Post soft-fork:
-//    - See the cases exercised within the table driven tests towards the end
-//    of this test.
+//   - Pre soft-fork:
+//   - A transaction spending a CSV output validly should be rejected from the
+//     mempool, but accepted in a valid generated block including the
+//     transaction.
+//   - Post soft-fork:
+//   - See the cases exercised within the table driven tests towards the end
+//     of this test.
 func TestBIP0068AndBIP0112Activation(t *testing.T) {
 	t.Parallel()
 

integration/rpcserver_test.go

@@ -13,12 +13,17 @@ import (
 	"fmt"
 	"os"
 	"runtime/debug"
+	"sort"
 	"testing"
+	"time"
 
 	"github.com/lbryio/lbcd/chaincfg"
 	"github.com/lbryio/lbcd/chaincfg/chainhash"
 	"github.com/lbryio/lbcd/integration/rpctest"
 	"github.com/lbryio/lbcd/rpcclient"
+	"github.com/lbryio/lbcd/txscript"
+	"github.com/lbryio/lbcd/wire"
+	"github.com/lbryio/lbcutil"
 )
 
 func testGetBestBlock(r *rpctest.Harness, t *testing.T) {
@@ -133,13 +138,278 @@ func testBulkClient(r *rpctest.Harness, t *testing.T) {
 			t.Fatalf("expected hash %s  to be in generated hash list", blockHash)
 		}
 	}
+}
 
+func testGetBlockStats(r *rpctest.Harness, t *testing.T) {
+	t.Parallel()
+
+	baseFeeRate := int64(10)
+	txValue := int64(50000000)
+	txQuantity := 10
+	txs := make([]*lbcutil.Tx, txQuantity)
+	fees := make([]int64, txQuantity)
+	sizes := make([]int64, txQuantity)
+	feeRates := make([]int64, txQuantity)
+	var outputCount int
+
+	// Generate test sample.
+	for i := 0; i < txQuantity; i++ {
+		address, err := r.NewAddress()
+		if err != nil {
+			t.Fatalf("Unable to generate address: %v", err)
+		}
+
+		pkScript, err := txscript.PayToAddrScript(address)
+		if err != nil {
+			t.Fatalf("Unable to generate PKScript: %v", err)
+		}
+
+		// This feerate is not the actual feerate. See comment below.
+		feeRate := baseFeeRate * int64(i)
+
+		tx, err := r.CreateTransaction([]*wire.TxOut{wire.NewTxOut(txValue, pkScript)}, lbcutil.Amount(feeRate), true)
+		if err != nil {
+			t.Fatalf("Unable to generate segwit transaction: %v", err)
+		}
+
+		txs[i] = lbcutil.NewTx(tx)
+		sizes[i] = int64(tx.SerializeSize())
+
+		// memWallet.fundTx makes some assumptions when calculating fees.
+		// For instance, it assumes the signature script has exactly 108 bytes
+		// and it does not account for the size of the change output.
+		// This needs to be taken into account when getting the true feerate.
+		scriptSigOffset := 108 - len(tx.TxIn[0].SignatureScript)
+		changeOutputSize := tx.TxOut[len(tx.TxOut)-1].SerializeSize()
+		fees[i] = (sizes[i] + int64(scriptSigOffset) - int64(changeOutputSize)) * feeRate
+		feeRates[i] = fees[i] / sizes[i]
+
+		outputCount += len(tx.TxOut)
+	}
+
+	stats := func(slice []int64) (int64, int64, int64, int64, int64) {
+		var total, average, min, max, median int64
+		min = slice[0]
+		length := len(slice)
+		for _, item := range slice {
+			if min > item {
+				min = item
+			}
+			if max < item {
+				max = item
+			}
+			total += item
+		}
+		average = total / int64(length)
+		sort.Slice(slice, func(i, j int) bool { return slice[i] < slice[j] })
+		if length == 0 {
+			median = 0
+		} else if length%2 == 0 {
+			median = (slice[length/2-1] + slice[length/2]) / 2
+		} else {
+			median = slice[length/2]
+		}
+		return total, average, min, max, median
+	}
+
+	totalFee, avgFee, minFee, maxFee, medianFee := stats(fees)
+	totalSize, avgSize, minSize, maxSize, medianSize := stats(sizes)
+	_, avgFeeRate, minFeeRate, maxFeeRate, _ := stats(feeRates)
+
+	tests := []struct {
+		name            string
+		txs             []*lbcutil.Tx
+		stats           []string
+		expectedResults map[string]interface{}
+	}{
+		{
+			name:  "empty block",
+			txs:   []*lbcutil.Tx{},
+			stats: []string{},
+			expectedResults: map[string]interface{}{
+				"avgfee":              int64(0),
+				"avgfeerate":          int64(0),
+				"avgtxsize":           int64(0),
+				"feerate_percentiles": []int64{0, 0, 0, 0, 0},
+				"ins":                 int64(0),
+				"maxfee":              int64(0),
+				"maxfeerate":          int64(0),
+				"maxtxsize":           int64(0),
+				"medianfee":           int64(0),
+				"mediantxsize":        int64(0),
+				"minfee":              int64(0),
+				"mintxsize":           int64(0),
+				"outs":                int64(1),
+				"swtotal_size":        int64(0),
+				"swtotal_weight":      int64(0),
+				"swtxs":               int64(0),
+				"total_out":           int64(0),
+				"total_size":          int64(0),
+				"total_weight":        int64(0),
+				"txs":                 int64(1),
+				"utxo_increase":       int64(1),
+			},
+		},
+		{
+			name: "block with 10 transactions + coinbase",
+			txs:  txs,
+			stats: []string{"avgfee", "avgfeerate", "avgtxsize", "feerate_percentiles",
+				"ins", "maxfee", "maxfeerate", "maxtxsize", "medianfee", "mediantxsize",
+				"minfee", "minfeerate", "mintxsize", "outs", "subsidy", "swtxs",
+				"total_size", "total_weight", "totalfee", "txs", "utxo_increase"},
+			expectedResults: map[string]interface{}{
+				"avgfee":     avgFee,
+				"avgfeerate": avgFeeRate,
+				"avgtxsize":  avgSize,
+				"feerate_percentiles": []int64{feeRates[0], feeRates[2],
+					feeRates[4], feeRates[7], feeRates[8]},
+				"ins":            int64(txQuantity),
+				"maxfee":         maxFee,
+				"maxfeerate":     maxFeeRate,
+				"maxtxsize":      maxSize,
+				"medianfee":      medianFee,
+				"mediantxsize":   medianSize,
+				"minfee":         minFee,
+				"minfeerate":     minFeeRate,
+				"mintxsize":      minSize,
+				"outs":           int64(outputCount + 1), // Coinbase output also counts.
+				"subsidy":        int64(100000000),
+				"swtotal_weight": nil, // This stat was not selected, so it should be nil.
+				"swtxs":          int64(0),
+				"total_size":     totalSize,
+				"total_weight":   totalSize * 4,
+				"totalfee":       totalFee,
+				"txs":            int64(txQuantity + 1), // Coinbase transaction also counts.
+				"utxo_increase":  int64(outputCount + 1 - txQuantity),
+				"utxo_size_inc":  nil,
+			},
+		},
+	}
+	for _, test := range tests {
+		// Submit a new block with the provided transactions.
+		block, err := r.GenerateAndSubmitBlock(test.txs, -1, time.Time{})
+		if err != nil {
+			t.Fatalf("Unable to generate block: %v from test %s", err, test.name)
+		}
+
+		blockStats, err := r.GetBlockStats(block.Hash(), &test.stats)
+		if err != nil {
+			t.Fatalf("Call to `getblockstats` on test %s failed: %v", test.name, err)
+		}
+
+		if blockStats.Height != (*int64)(nil) && *blockStats.Height != int64(block.Height()) {
+			t.Fatalf("Unexpected result in test %s, stat: %v, expected: %v, got: %v", test.name, "height", block.Height(), *blockStats.Height)
+		}
+
+		for stat, value := range test.expectedResults {
+			var result interface{}
+			switch stat {
+			case "avgfee":
+				result = blockStats.AverageFee
+			case "avgfeerate":
+				result = blockStats.AverageFeeRate
+			case "avgtxsize":
+				result = blockStats.AverageTxSize
+			case "feerate_percentiles":
+				result = blockStats.FeeratePercentiles
+			case "blockhash":
+				result = blockStats.Hash
+			case "height":
+				result = blockStats.Height
+			case "ins":
+				result = blockStats.Ins
+			case "maxfee":
+				result = blockStats.MaxFee
+			case "maxfeerate":
+				result = blockStats.MaxFeeRate
+			case "maxtxsize":
+				result = blockStats.MaxTxSize
+			case "medianfee":
+				result = blockStats.MedianFee
+			case "mediantime":
+				result = blockStats.MedianTime
+			case "mediantxsize":
+				result = blockStats.MedianTxSize
+			case "minfee":
+				result = blockStats.MinFee
+			case "minfeerate":
+				result = blockStats.MinFeeRate
+			case "mintxsize":
+				result = blockStats.MinTxSize
+			case "outs":
+				result = blockStats.Outs
+			case "swtotal_size":
+				result = blockStats.SegWitTotalSize
+			case "swtotal_weight":
+				result = blockStats.SegWitTotalWeight
+			case "swtxs":
+				result = blockStats.SegWitTxs
+			case "subsidy":
+				result = blockStats.Subsidy
+			case "time":
+				result = blockStats.Time
+			case "total_out":
+				result = blockStats.TotalOut
+			case "total_size":
+				result = blockStats.TotalSize
+			case "total_weight":
+				result = blockStats.TotalWeight
+			case "totalfee":
+				result = blockStats.TotalFee
+			case "txs":
+				result = blockStats.Txs
+			case "utxo_increase":
+				result = blockStats.UTXOIncrease
+			case "utxo_size_inc":
+				result = blockStats.UTXOSizeIncrease
+			}
+
+			var equality bool
+
+			// Check for nil equality.
+			if value == nil && result == (*int64)(nil) {
+				equality = true
+				break
+			} else if result == nil || value == nil {
+				equality = false
+			}
+
+			var resultValue interface{}
+			switch v := value.(type) {
+			case int64:
+				resultValue = *result.(*int64)
+				equality = v == resultValue
+			case string:
+				resultValue = *result.(*string)
+				equality = v == resultValue
+			case []int64:
+				resultValue = *result.(*[]int64)
+				resultSlice := resultValue.([]int64)
+				equality = true
+				for i, item := range resultSlice {
+					if item != v[i] {
+						equality = false
+						break
+					}
+				}
+			}
+			if !equality {
+				if result != nil {
+					t.Fatalf("Unexpected result in test %s, stat: %v, expected: %v, got: %v", test.name, stat, value, resultValue)
+				} else {
+					t.Fatalf("Unexpected result in test %s, stat: %v, expected: %v, got: %v", test.name, stat, value, "<nil>")
+				}
+			}
+
+		}
+	}
 }
 
 var rpcTestCases = []rpctest.HarnessTestCase{
 	testGetBestBlock,
 	testGetBlockCount,
 	testGetBlockHash,
+	testGetBlockStats,
 	testBulkClient,
 }
 
@@ -151,7 +421,8 @@ func TestMain(m *testing.M) {
 	// In order to properly test scenarios on as if we were on mainnet,
 	// ensure that non-standard transactions aren't accepted into the
 	// mempool or relayed.
-	btcdCfg := []string{"--rejectnonstd"}
+	// Enable transaction index to be able to fully test GetBlockStats
+	btcdCfg := []string{"--rejectnonstd", "--txindex"}
 	primaryHarness, err = rpctest.New(
 		&chaincfg.SimNetParams, nil, btcdCfg, "",
 	)

integration/rpctest/rpc_harness.go

@@ -16,6 +16,7 @@ import (
 	"testing"
 	"time"
 
+	"github.com/lbryio/lbcd/btcjson"
 	"github.com/lbryio/lbcd/chaincfg"
 	"github.com/lbryio/lbcd/chaincfg/chainhash"
 	"github.com/lbryio/lbcd/rpcclient"
@@ -512,6 +513,18 @@ func (h *Harness) GenerateAndSubmitBlockWithCustomCoinbaseOutputs(
 	return newBlock, nil
 }
 
+// GetBlockStats returns block statistics. First argument specifies height or
+// hash of the target block. Second argument allows to select certain stats to
+// return. If second argument is empty, all stats are returned.
+func (h *Harness) GetBlockStats(hashOrHeight interface{}, stats *[]string) (
+	*btcjson.GetBlockStatsResult, error) {
+
+	h.Lock()
+	defer h.Unlock()
+
+	return h.Client.GetBlockStats(hashOrHeight, stats)
+}
+
 // generateListeningAddresses returns two strings representing listening
 // addresses designated for the current rpc test. If there haven't been any
 // test instances created, the default ports are used. Otherwise, in order to

mempool/doc.go

@@ -31,40 +31,40 @@ proceed.  Typically, this will involve things such as relaying the transactions
 to other peers on the network and notifying the mining process that new
 transactions are available.
 
-Feature Overview
+# Feature Overview
 
 The following is a quick overview of the major features.  It is not intended to
 be an exhaustive list.
 
- - Maintain a pool of fully validated transactions
-   - Reject non-fully-spent duplicate transactions
-   - Reject coinbase transactions
-   - Reject double spends (both from the chain and other transactions in pool)
-   - Reject invalid transactions according to the network consensus rules
-   - Full script execution and validation with signature cache support
-   - Individual transaction query support
- - Orphan transaction support (transactions that spend from unknown outputs)
-   - Configurable limits (see transaction acceptance policy)
-   - Automatic addition of orphan transactions that are no longer orphans as new
-     transactions are added to the pool
-   - Individual orphan transaction query support
- - Configurable transaction acceptance policy
-   - Option to accept or reject standard transactions
-   - Option to accept or reject transactions based on priority calculations
-   - Rate limiting of low-fee and free transactions
-   - Non-zero fee threshold
-   - Max signature operations per transaction
-   - Max orphan transaction size
-   - Max number of orphan transactions allowed
- - Additional metadata tracking for each transaction
-   - Timestamp when the transaction was added to the pool
-   - Most recent block height when the transaction was added to the pool
-   - The fee the transaction pays
-   - The starting priority for the transaction
- - Manual control of transaction removal
-   - Recursive removal of all dependent transactions
+  - Maintain a pool of fully validated transactions
+  - Reject non-fully-spent duplicate transactions
+  - Reject coinbase transactions
+  - Reject double spends (both from the chain and other transactions in pool)
+  - Reject invalid transactions according to the network consensus rules
+  - Full script execution and validation with signature cache support
+  - Individual transaction query support
+  - Orphan transaction support (transactions that spend from unknown outputs)
+  - Configurable limits (see transaction acceptance policy)
+  - Automatic addition of orphan transactions that are no longer orphans as new
+    transactions are added to the pool
+  - Individual orphan transaction query support
+  - Configurable transaction acceptance policy
+  - Option to accept or reject standard transactions
+  - Option to accept or reject transactions based on priority calculations
+  - Rate limiting of low-fee and free transactions
+  - Non-zero fee threshold
+  - Max signature operations per transaction
+  - Max orphan transaction size
+  - Max number of orphan transactions allowed
+  - Additional metadata tracking for each transaction
+  - Timestamp when the transaction was added to the pool
+  - Most recent block height when the transaction was added to the pool
+  - The fee the transaction pays
+  - The starting priority for the transaction
+  - Manual control of transaction removal
+  - Recursive removal of all dependent transactions
 
-Errors
+# Errors
 
 Errors returned by this package are either the raw errors provided by underlying
 calls or of type mempool.RuleError.  Since there are two classes of rules

mempool/mempool.go

@@ -8,6 +8,7 @@ import (
 	"container/list"
 	"fmt"
 	"math"
+	"reflect"
 	"sync"
 	"sync/atomic"
 	"time"
@@ -156,6 +157,15 @@ type Policy struct {
 	RejectReplacement bool
 }
 
+// aggregateInfo tracks aggregated serialized size, memory usage, and fees
+// for TxDesc in the mempool.
+type aggregateInfo struct {
+	totalCount int64
+	totalBytes int64
+	totalMem   int64
+	totalFee   int64
+}
+
 // TxDesc is a descriptor containing a transaction in the mempool along with
 // additional metadata.
 type TxDesc struct {
@@ -166,6 +176,20 @@ type TxDesc struct {
 	StartingPriority float64
 }
 
+func (txD *TxDesc) incr(info *aggregateInfo) {
+	info.totalCount += 1
+	info.totalBytes += int64(txD.Tx.MsgTx().SerializeSize())
+	info.totalMem += int64(dynamicMemUsage(reflect.ValueOf(txD)))
+	info.totalFee += txD.Fee
+}
+
+func (txD *TxDesc) decr(info *aggregateInfo) {
+	info.totalCount -= 1
+	info.totalBytes -= int64(txD.Tx.MsgTx().SerializeSize())
+	info.totalMem -= int64(dynamicMemUsage(reflect.ValueOf(txD)))
+	info.totalFee -= txD.Fee
+}
+
 // orphanTx is normal transaction that references an ancestor transaction
 // that is not yet available.  It also contains additional information related
 // to it such as an expiration time to help prevent caching the orphan forever.
@@ -175,6 +199,18 @@ type orphanTx struct {
 	expiration time.Time
 }
 
+func (otx *orphanTx) incr(info *aggregateInfo) {
+	info.totalCount += 1
+	info.totalBytes += int64(otx.tx.MsgTx().SerializeSize())
+	info.totalMem += int64(dynamicMemUsage(reflect.ValueOf(otx)))
+}
+
+func (otx *orphanTx) decr(info *aggregateInfo) {
+	info.totalCount -= 1
+	info.totalBytes -= int64(otx.tx.MsgTx().SerializeSize())
+	info.totalMem -= int64(dynamicMemUsage(reflect.ValueOf(otx)))
+}
+
 // TxPool is used as a source of transactions that need to be mined into blocks
 // and relayed to other peers.  It is safe for concurrent access from multiple
 // peers.
@@ -196,6 +232,12 @@ type TxPool struct {
 	// the scan will only run when an orphan is added to the pool as opposed
 	// to on an unconditional timer.
 	nextExpireScan time.Time
+
+	// stats are aggregated over pool, orphans, etc.
+	stats aggregateInfo
+
+	// unbroadcast is a set of transactions yet to be broadcast.
+	unbroadcast map[chainhash.Hash]bool
 }
 
 // Ensure the TxPool type implements the mining.TxSource interface.
@@ -240,6 +282,9 @@ func (mp *TxPool) removeOrphan(tx *btcutil.Tx, removeRedeemers bool) {
 
 	// Remove the transaction from the orphan pool.
 	delete(mp.orphans, *txHash)
+
+	// Update stats.
+	otx.decr(&mp.stats)
 }
 
 // RemoveOrphan removes the passed orphan transaction from the orphan pool and
@@ -336,11 +381,12 @@ func (mp *TxPool) addOrphan(tx *btcutil.Tx, tag Tag) {
 	// orphan if space is still needed.
 	mp.limitNumOrphans()
 
-	mp.orphans[*tx.Hash()] = &orphanTx{
+	otx := &orphanTx{
 		tx:         tx,
 		tag:        tag,
 		expiration: time.Now().Add(orphanTTL),
 	}
+	mp.orphans[*tx.Hash()] = otx
 	for _, txIn := range tx.MsgTx().TxIn {
 		if _, exists := mp.orphansByPrev[txIn.PreviousOutPoint]; !exists {
 			mp.orphansByPrev[txIn.PreviousOutPoint] =
@@ -349,6 +395,9 @@ func (mp *TxPool) addOrphan(tx *btcutil.Tx, tag Tag) {
 		mp.orphansByPrev[txIn.PreviousOutPoint][*tx.Hash()] = tx
 	}
 
+	// Update stats.
+	otx.incr(&mp.stats)
+
 	log.Debugf("Stored orphan transaction %v (total: %d)", tx.Hash(),
 		len(mp.orphans))
 }
@@ -498,6 +547,9 @@ func (mp *TxPool) removeTransaction(tx *btcutil.Tx, removeRedeemers bool) {
 		}
 		delete(mp.pool, *txHash)
 
+		// Update stats.
+		txDesc.decr(&mp.stats)
+
 		// Inform associated fee estimator that the transaction has been removed
 		// from the mempool
 		if mp.cfg.RemoveTxFromFeeEstimation != nil {
@@ -579,6 +631,9 @@ func (mp *TxPool) addTransaction(utxoView *blockchain.UtxoViewpoint, tx *btcutil
 		mp.cfg.AddTxToFeeEstimation(txD.Tx.Hash(), txD.Fee, size)
 	}
 
+	// Update stats.
+	txD.incr(&mp.stats)
+
 	return txD
 }
 
@@ -1503,6 +1558,38 @@ func (mp *TxPool) MiningDescs() []*mining.TxDesc {
 	return descs
 }
 
+func (mp *TxPool) AddUnbroadcastTx(hash *chainhash.Hash) {
+	mp.mtx.Lock()
+	mp.unbroadcast[*hash] = true
+	mp.mtx.Unlock()
+}
+
+func (mp *TxPool) RemoveUnbroadcastTx(hash *chainhash.Hash) {
+	mp.mtx.Lock()
+	delete(mp.unbroadcast, *hash)
+	mp.mtx.Unlock()
+}
+
+func (mp *TxPool) MempoolInfo() *btcjson.GetMempoolInfoResult {
+	mp.mtx.RLock()
+	policy := mp.cfg.Policy
+	stats := mp.stats
+	unbroadcastCount := int64(len(mp.unbroadcast))
+	mp.mtx.RUnlock()
+
+	ret := &btcjson.GetMempoolInfoResult{
+		Size:             stats.totalCount,
+		Usage:            stats.totalMem,
+		Bytes:            stats.totalBytes,
+		TotalFee:         btcutil.Amount(stats.totalFee).ToBTC(),
+		MemPoolMinFee:    btcutil.Amount(calcMinRequiredTxRelayFee(1000, policy.MinRelayTxFee)).ToBTC(),
+		MinRelayTxFee:    policy.MinRelayTxFee.ToBTC(),
+		UnbroadcastCount: unbroadcastCount,
+	}
+
+	return ret
+}
+
 // RawMempoolVerbose returns all the entries in the mempool as a fully
 // populated btcjson result.
 //
@@ -1576,5 +1663,6 @@ func New(cfg *Config) *TxPool {
 		orphansByPrev:  make(map[wire.OutPoint]map[chainhash.Hash]*btcutil.Tx),
 		nextExpireScan: time.Now().Add(orphanExpireScanInterval),
 		outpoints:      make(map[wire.OutPoint]*btcutil.Tx),
+		unbroadcast:    make(map[chainhash.Hash]bool),
 	}
 }

mempool/mempool_test.go

@@ -21,6 +21,12 @@ import (
 	btcutil "github.com/lbryio/lbcutil"
 )
 
+func init() {
+	// Toggle assert & debug messages when running tests.
+	dynamicMemUsageAssert = true
+	dynamicMemUsageDebug = false
+}
+
 // fakeChain is used by the pool harness to provide generated test utxos and
 // a current faked chain height to the pool callbacks.  This, in turn, allows
 // transactions to appear as though they are spending completely valid utxos.

mempool/memusage.go

@@ -0,0 +1,89 @@
+// Copyright (c) 2013-2016 The btcsuite developers
+// Use of this source code is governed by an ISC
+// license that can be found in the LICENSE file.
+
+package mempool
+
+import (
+	"fmt"
+	"reflect"
+)
+
+var (
+	dynamicMemUsageAssert   = false
+	dynamicMemUsageDebug    = false
+	dynamicMemUsageMaxDepth = 10
+)
+
+func dynamicMemUsage(v reflect.Value) uintptr {
+	return dynamicMemUsageCrawl(v, 0)
+}
+
+func dynamicMemUsageCrawl(v reflect.Value, depth int) uintptr {
+	t := v.Type()
+	bytes := t.Size()
+	if dynamicMemUsageDebug {
+		println("[", depth, "]", t.Kind().String(), "(", t.String(), ") ->", t.Size())
+	}
+
+	if depth >= dynamicMemUsageMaxDepth {
+		if dynamicMemUsageAssert {
+			panic("crawl reached maximum depth")
+		}
+		return bytes
+	}
+
+	// For complex types, we need to peek inside slices/arrays/structs and chase pointers.
+	switch t.Kind() {
+	case reflect.Pointer, reflect.Interface:
+		if !v.IsNil() {
+			bytes += dynamicMemUsageCrawl(v.Elem(), depth+1)
+		}
+	case reflect.Array, reflect.Slice:
+		for j := 0; j < v.Len(); j++ {
+			vi := v.Index(j)
+			k := vi.Type().Kind()
+			if dynamicMemUsageDebug {
+				println("[", depth, "] index:", j, "kind:", k.String())
+			}
+			elemBytes := uintptr(0)
+			if t.Kind() == reflect.Array {
+				if (k == reflect.Pointer || k == reflect.Interface) && !vi.IsNil() {
+					elemBytes += dynamicMemUsageCrawl(vi.Elem(), depth+1)
+				}
+			} else { // slice
+				elemBytes += dynamicMemUsageCrawl(vi, depth+1)
+			}
+			if k == reflect.Uint8 {
+				// short circuit for byte slice/array
+				bytes += elemBytes * uintptr(v.Len())
+				if dynamicMemUsageDebug {
+					println("...", v.Len(), "elements")
+				}
+				break
+			}
+			bytes += elemBytes
+		}
+	case reflect.Struct:
+		for _, f := range reflect.VisibleFields(t) {
+			vf := v.FieldByIndex(f.Index)
+			k := vf.Type().Kind()
+			if dynamicMemUsageDebug {
+				println("[", depth, "] field:", f.Name, "kind:", k.String())
+			}
+			if (k == reflect.Pointer || k == reflect.Interface) && !vf.IsNil() {
+				bytes += dynamicMemUsageCrawl(vf.Elem(), depth+1)
+			} else if k == reflect.Array || k == reflect.Slice {
+				bytes -= vf.Type().Size()
+				bytes += dynamicMemUsageCrawl(vf, depth+1)
+			}
+		}
+	case reflect.Uint8:
+	default:
+		if dynamicMemUsageAssert {
+			panic(fmt.Sprintf("unsupported kind: %v", t.Kind()))
+		}
+	}
+
+	return bytes
+}

mempool/policy.go

@@ -249,7 +249,7 @@ func GetDustThreshold(txOut *wire.TxOut) int64 {
 		totalSize += 107
 	}
 
-	return 3 * int64(totalSize)
+	return int64(totalSize)
 }
 
 // IsDust returns whether or not the passed transaction output amount is
@@ -264,7 +264,7 @@ func IsDust(txOut *wire.TxOut, minRelayTxFee btcutil.Amount) bool {
 	}
 
 	// The output is considered dust if the cost to the network to spend the
-	// coins is more than 1/3 of the minimum free transaction relay fee.
+	// coins is more than the minimum free transaction relay fee.
 	// minFreeTxRelayFee is in Satoshi/KB, so multiply by 1000 to
 	// convert to bytes.
 	//
@@ -273,7 +273,7 @@ func IsDust(txOut *wire.TxOut, minRelayTxFee btcutil.Amount) bool {
 	// fee of 1000, this equates to values less than 546 satoshi being
 	// considered dust.
 	//
-	// The following is equivalent to (value/totalSize) * (1/3) * 1000
+	// The following is equivalent to (value/totalSize) * 1000
 	// without needing to do floating point math.
 	if txOut.Value > dustCap {
 		return false

mempool/policy_test.go

@@ -233,14 +233,14 @@ func TestDust(t *testing.T) {
 			true,
 		},
 		{
-			"38 byte public key script with value 584",
-			wire.TxOut{Value: 584, PkScript: pkScript},
+			"38 byte public key script with value 194",
+			wire.TxOut{Value: 194, PkScript: pkScript},
 			1000,
 			true,
 		},
 		{
-			"38 byte public key script with value 585",
-			wire.TxOut{Value: 585, PkScript: pkScript},
+			"38 byte public key script with value 195",
+			wire.TxOut{Value: 195, PkScript: pkScript},
 			1000,
 			false,
 		},

mining/mining.go

@@ -420,26 +420,26 @@ func NewBlkTmplGenerator(policy *Policy, params *chaincfg.Params,
 //
 // Given the above, a block generated by this function is of the following form:
 //
-//   -----------------------------------  --  --
-//  |      Coinbase Transaction         |   |   |
-//  |-----------------------------------|   |   |
-//  |                                   |   |   | ----- policy.BlockPrioritySize
-//  |   High-priority Transactions      |   |   |
-//  |                                   |   |   |
-//  |-----------------------------------|   | --
-//  |                                   |   |
-//  |                                   |   |
-//  |                                   |   |--- policy.BlockMaxSize
-//  |  Transactions prioritized by fee  |   |
-//  |  until <= policy.TxMinFreeFee     |   |
-//  |                                   |   |
-//  |                                   |   |
-//  |                                   |   |
-//  |-----------------------------------|   |
-//  |  Low-fee/Non high-priority (free) |   |
-//  |  transactions (while block size   |   |
-//  |  <= policy.BlockMinSize)          |   |
-//   -----------------------------------  --
+//	 -----------------------------------  --  --
+//	|      Coinbase Transaction         |   |   |
+//	|-----------------------------------|   |   |
+//	|                                   |   |   | ----- policy.BlockPrioritySize
+//	|   High-priority Transactions      |   |   |
+//	|                                   |   |   |
+//	|-----------------------------------|   | --
+//	|                                   |   |
+//	|                                   |   |
+//	|                                   |   |--- policy.BlockMaxSize
+//	|  Transactions prioritized by fee  |   |
+//	|  until <= policy.TxMinFreeFee     |   |
+//	|                                   |   |
+//	|                                   |   |
+//	|                                   |   |
+//	|-----------------------------------|   |
+//	|  Low-fee/Non high-priority (free) |   |
+//	|  transactions (while block size   |   |
+//	|  <= policy.BlockMinSize)          |   |
+//	 -----------------------------------  --
 func (g *BlkTmplGenerator) NewBlockTemplate(payToAddress btcutil.Address) (*BlockTemplate, error) {
 	// Extend the most recently known best block.
 	best := g.chain.BestSnapshot()

netsync/blocklogger.go

@@ -27,8 +27,9 @@ type blockProgressLogger struct {
 
 // newBlockProgressLogger returns a new block progress logger.
 // The progress message is templated as follows:
-//  {progressAction} {numProcessed} {blocks|block} in the last {timePeriod}
-//  ({numTxs}, height {lastBlockHeight}, {lastBlockTimeStamp})
+//
+//	{progressAction} {numProcessed} {blocks|block} in the last {timePeriod}
+//	({numTxs}, height {lastBlockHeight}, {lastBlockTimeStamp})
 func newBlockProgressLogger(progressMessage string, logger btclog.Logger) *blockProgressLogger {
 	return &blockProgressLogger{
 		lastBlockLogTime: time.Now(),

netsync/manager.go

@@ -1294,16 +1294,9 @@ func (sm *SyncManager) handleInvMsg(imsg *invMsg) {
 			break
 		}
 	}
-
-	e := wire.BaseEncoding
-	// we think that the iv.Type set above is sufficient. If not:
-	// if peer.IsWitnessEnabled() {
-	//	e = wire.WitnessEncoding
-	//}
-
 	state.requestQueue = requestQueue
 	if len(gdmsg.InvList) > 0 {
-		peer.QueueMessageWithEncoding(gdmsg, nil, e)
+		peer.QueueMessage(gdmsg, nil)
 	}
 }
 

peer/doc.go

@@ -6,7 +6,7 @@
 Package peer provides a common base for creating and managing Bitcoin network
 peers.
 
-Overview
+# Overview
 
 This package builds upon the wire package, which provides the fundamental
 primitives necessary to speak the bitcoin wire protocol, in order to simplify
@@ -16,41 +16,41 @@ Payment Verification (SPV) nodes, proxies, etc.
 
 A quick overview of the major features peer provides are as follows:
 
- - Provides a basic concurrent safe bitcoin peer for handling bitcoin
-   communications via the peer-to-peer protocol
- - Full duplex reading and writing of bitcoin protocol messages
- - Automatic handling of the initial handshake process including protocol
-   version negotiation
- - Asynchronous message queuing of outbound messages with optional channel for
-   notification when the message is actually sent
- - Flexible peer configuration
-   - Caller is responsible for creating outgoing connections and listening for
-     incoming connections so they have flexibility to establish connections as
-     they see fit (proxies, etc)
-   - User agent name and version
-   - Bitcoin network
-   - Service support signalling (full nodes, bloom filters, etc)
-   - Maximum supported protocol version
-   - Ability to register callbacks for handling bitcoin protocol messages
- - Inventory message batching and send trickling with known inventory detection
-   and avoidance
- - Automatic periodic keep-alive pinging and pong responses
- - Random nonce generation and self connection detection
- - Proper handling of bloom filter related commands when the caller does not
-   specify the related flag to signal support
-   - Disconnects the peer when the protocol version is high enough
-   - Does not invoke the related callbacks for older protocol versions
- - Snapshottable peer statistics such as the total number of bytes read and
-   written, the remote address, user agent, and negotiated protocol version
- - Helper functions pushing addresses, getblocks, getheaders, and reject
-   messages
-   - These could all be sent manually via the standard message output function,
-     but the helpers provide additional nice functionality such as duplicate
-     filtering and address randomization
- - Ability to wait for shutdown/disconnect
- - Comprehensive test coverage
+  - Provides a basic concurrent safe bitcoin peer for handling bitcoin
+    communications via the peer-to-peer protocol
+  - Full duplex reading and writing of bitcoin protocol messages
+  - Automatic handling of the initial handshake process including protocol
+    version negotiation
+  - Asynchronous message queuing of outbound messages with optional channel for
+    notification when the message is actually sent
+  - Flexible peer configuration
+  - Caller is responsible for creating outgoing connections and listening for
+    incoming connections so they have flexibility to establish connections as
+    they see fit (proxies, etc)
+  - User agent name and version
+  - Bitcoin network
+  - Service support signalling (full nodes, bloom filters, etc)
+  - Maximum supported protocol version
+  - Ability to register callbacks for handling bitcoin protocol messages
+  - Inventory message batching and send trickling with known inventory detection
+    and avoidance
+  - Automatic periodic keep-alive pinging and pong responses
+  - Random nonce generation and self connection detection
+  - Proper handling of bloom filter related commands when the caller does not
+    specify the related flag to signal support
+  - Disconnects the peer when the protocol version is high enough
+  - Does not invoke the related callbacks for older protocol versions
+  - Snapshottable peer statistics such as the total number of bytes read and
+    written, the remote address, user agent, and negotiated protocol version
+  - Helper functions pushing addresses, getblocks, getheaders, and reject
+    messages
+  - These could all be sent manually via the standard message output function,
+    but the helpers provide additional nice functionality such as duplicate
+    filtering and address randomization
+  - Ability to wait for shutdown/disconnect
+  - Comprehensive test coverage
 
-Peer Configuration
+# Peer Configuration
 
 All peer configuration is handled with the Config struct.  This allows the
 caller to specify things such as the user agent name and version, the bitcoin
@@ -58,7 +58,7 @@ network to use, which services it supports, and callbacks to invoke when bitcoin
 messages are received.  See the documentation for each field of the Config
 struct for more details.
 
-Inbound and Outbound Peers
+# Inbound and Outbound Peers
 
 A peer can either be inbound or outbound.  The caller is responsible for
 establishing the connection to remote peers and listening for incoming peers.
@@ -73,7 +73,7 @@ Disconnect to disconnect from the peer and clean up all resources.
 WaitForDisconnect can be used to block until peer disconnection and resource
 cleanup has completed.
 
-Callbacks
+# Callbacks
 
 In order to do anything useful with a peer, it is necessary to react to bitcoin
 messages.  This is accomplished by creating an instance of the MessageListeners
@@ -92,7 +92,7 @@ It is often useful to use closures which encapsulate state when specifying the
 callback handlers.  This provides a clean method for accessing that state when
 callbacks are invoked.
 
-Queuing Messages and Inventory
+# Queuing Messages and Inventory
 
 The QueueMessage function provides the fundamental means to send messages to the
 remote peer.  As the name implies, this employs a non-blocking queue.  A done
@@ -106,7 +106,7 @@ QueueInventory function.  It employs batching and trickling along with
 intelligent known remote peer inventory detection and avoidance through the use
 of a most-recently used algorithm.
 
-Message Sending Helper Functions
+# Message Sending Helper Functions
 
 In addition to the bare QueueMessage function previously described, the
 PushAddrMsg, PushGetBlocksMsg, PushGetHeadersMsg, and PushRejectMsg functions
@@ -128,13 +128,13 @@ appropriate reject message based on the provided parameters as well as
 optionally provides a flag to cause it to block until the message is actually
 sent.
 
-Peer Statistics
+# Peer Statistics
 
 A snapshot of the current peer statistics can be obtained with the StatsSnapshot
 function.  This includes statistics such as the total number of bytes read and
 written, the remote address, user agent, and negotiated protocol version.
 
-Logging
+# Logging
 
 This package provides extensive logging capabilities through the UseLogger
 function which allows a btclog.Logger to be specified.  For example, logging at
@@ -142,7 +142,7 @@ the debug level provides summaries of every message sent and received, and
 logging at the trace level provides full dumps of parsed messages as well as the
 raw message bytes using a format similar to hexdump -C.
 
-Bitcoin Improvement Proposals
+# Bitcoin Improvement Proposals
 
 This package supports all BIPS supported by the wire package.
 (https://pkg.go.dev/github.com/lbryio/lbcd/wire#hdr-Bitcoin_Improvement_Proposals)

peer/peer.go

@@ -2096,10 +2096,10 @@ func (p *Peer) writeLocalVersionMsg() error {
 // peer. The events should occur in the following order, otherwise an error is
 // returned:
 //
-//   1. Remote peer sends their version.
-//   2. We send our version.
-//   3. We send our verack.
-//   4. Remote peer sends their verack.
+//  1. Remote peer sends their version.
+//  2. We send our version.
+//  3. We send our verack.
+//  4. Remote peer sends their verack.
 func (p *Peer) negotiateInboundProtocol() error {
 	if err := p.readRemoteVersionMsg(); err != nil {
 		return err
@@ -2121,10 +2121,10 @@ func (p *Peer) negotiateInboundProtocol() error {
 // peer. The events should occur in the following order, otherwise an error is
 // returned:
 //
-//   1. We send our version.
-//   2. Remote peer sends their version.
-//   3. Remote peer sends their verack.
-//   4. We send our verack.
+//  1. We send our version.
+//  2. Remote peer sends their version.
+//  3. Remote peer sends their verack.
+//  4. We send our verack.
 func (p *Peer) negotiateOutboundProtocol() error {
 	if err := p.writeLocalVersionMsg(); err != nil {
 		return err

rpcadapters.go

@@ -6,6 +6,7 @@ package main
 
 import (
 	"sync/atomic"
+	"time"
 
 	"github.com/lbryio/lbcd/blockchain"
 	"github.com/lbryio/lbcd/chaincfg/chainhash"
@@ -181,6 +182,57 @@ func (cm *rpcConnManager) ConnectedPeers() []rpcserverPeer {
 	return peers
 }
 
+// BannedPeers returns a map consisting of all banned host with banned period.
+//
+// This function is safe for concurrent access and is part of the
+// rpcserverConnManager interface implementation.
+func (cm *rpcConnManager) BannedPeers() map[string]bannedPeriod {
+	replyChan := make(chan map[string]bannedPeriod)
+	cm.server.query <- listBannedPeersMsg{reply: replyChan}
+	return <-replyChan
+}
+
+// SetBan removes the peer associated with the provided address from the
+// list of persistent peers.
+//
+// This function is safe for concurrent access and is part of the
+// rpcserverConnManager interface implementation.
+func (cm *rpcConnManager) SetBan(addr string, since, until time.Time) error {
+	replyChan := make(chan error)
+	cm.server.query <- setBanMsg{
+		addr:  addr,
+		since: since,
+		until: until,
+		reply: replyChan,
+	}
+	return <-replyChan
+}
+
+// RemoveBan removes a host from banned list.
+//
+// This function is safe for concurrent access and is part of the
+// rpcserverConnManager interface implementation.
+func (cm *rpcConnManager) RemoveBan(addr string) error {
+	replyChan := make(chan error)
+	cm.server.query <- removeBanMsg{
+		addr:  addr,
+		reply: replyChan,
+	}
+	return <-replyChan
+}
+
+// ClearBanned removes all banned host with banned period.
+//
+// This function is safe for concurrent access and is part of the
+// rpcserverConnManager interface implementation.
+func (cm *rpcConnManager) ClearBanned() error {
+	replyChan := make(chan error)
+	cm.server.query <- clearBannedMsg{
+		reply: replyChan,
+	}
+	return <-replyChan
+}
+
 // PersistentPeers returns an array consisting of all the added persistent
 // peers.
 //

rpcclient/doc.go

@@ -5,7 +5,7 @@
 /*
 Package rpcclient implements a websocket-enabled Bitcoin JSON-RPC client.
 
-Overview
+# Overview
 
 This client provides a robust and easy to use client for interfacing with a
 Bitcoin RPC server that uses a btcd/bitcoin core compatible Bitcoin JSON-RPC
@@ -24,7 +24,7 @@ btcd or btcwallet by default.  However, configuration options are provided to
 fall back to HTTP POST and disable TLS to support talking with inferior bitcoin
 core style RPC servers.
 
-Websockets vs HTTP POST
+# Websockets vs HTTP POST
 
 In HTTP POST-based JSON-RPC, every request creates a new HTTP connection,
 issues the call, waits for the response, and closes the connection.  This adds
@@ -40,7 +40,7 @@ can be invoked without having to go through a connect/disconnect cycle for every
 call.  In addition, the websocket interface provides other nice features such as
 the ability to register for asynchronous notifications of various events.
 
-Synchronous vs Asynchronous API
+# Synchronous vs Asynchronous API
 
 The client provides both a synchronous (blocking) and asynchronous API.
 
@@ -57,7 +57,7 @@ the Receive method on the returned instance will either return the result
 immediately if it has already arrived, or block until it has.  This is useful
 since it provides the caller with greater control over concurrency.
 
-Notifications
+# Notifications
 
 The first important part of notifications is to realize that they will only
 work when connected via websockets.  This should intuitively make sense
@@ -67,7 +67,7 @@ All notifications provided by btcd require registration to opt-in.  For example,
 if you want to be notified when funds are received by a set of addresses, you
 register the addresses via the NotifyReceived (or NotifyReceivedAsync) function.
 
-Notification Handlers
+# Notification Handlers
 
 Notifications are exposed by the client through the use of callback handlers
 which are setup via a NotificationHandlers instance that is specified by the
@@ -83,7 +83,7 @@ will cause a deadlock as more server responses won't be read until the callback
 returns, but the callback would be waiting for a response.   Thus, any
 additional RPCs must be issued an a completely decoupled manner.
 
-Automatic Reconnection
+# Automatic Reconnection
 
 By default, when running in websockets mode, this client will automatically
 keep trying to reconnect to the RPC server should the connection be lost.  There
@@ -116,7 +116,7 @@ chain services will be available.  Depending on your application, you might only
 need chain-related RPCs.  In contrast, btcwallet provides pass through treatment
 for chain-related RPCs, so it supports them in addition to wallet-related RPCs.
 
-Errors
+# Errors
 
 There are 3 categories of errors that will be returned throughout this package:
 
@@ -144,35 +144,35 @@ The third category of errors, that is errors returned by the server, can be
 detected by type asserting the error in a *btcjson.RPCError.  For example, to
 detect if a command is unimplemented by the remote RPC server:
 
-  amount, err := client.GetBalance("")
-  if err != nil {
-  	if jerr, ok := err.(*btcjson.RPCError); ok {
-  		switch jerr.Code {
-  		case btcjson.ErrRPCUnimplemented:
-  			// Handle not implemented error
+	  amount, err := client.GetBalance("")
+	  if err != nil {
+	  	if jerr, ok := err.(*btcjson.RPCError); ok {
+	  		switch jerr.Code {
+	  		case btcjson.ErrRPCUnimplemented:
+	  			// Handle not implemented error
 
-  		// Handle other specific errors you care about
-		}
-  	}
+	  		// Handle other specific errors you care about
+			}
+	  	}
 
-  	// Log or otherwise handle the error knowing it was not one returned
-  	// from the remote RPC server.
-  }
+	  	// Log or otherwise handle the error knowing it was not one returned
+	  	// from the remote RPC server.
+	  }
 
-Example Usage
+# Example Usage
 
 The following full-blown client examples are in the examples directory:
 
- - bitcoincorehttp
-   Connects to a bitcoin core RPC server using HTTP POST mode with TLS disabled
-   and gets the current block count
- - btcdwebsockets
-   Connects to a btcd RPC server using TLS-secured websockets, registers for
-   block connected and block disconnected notifications, and gets the current
-   block count
- - btcwalletwebsockets
-   Connects to a btcwallet RPC server using TLS-secured websockets, registers
-   for notifications about changes to account balances, and gets a list of
-   unspent transaction outputs (utxos) the wallet can sign
+  - bitcoincorehttp
+    Connects to a bitcoin core RPC server using HTTP POST mode with TLS disabled
+    and gets the current block count
+  - btcdwebsockets
+    Connects to a btcd RPC server using TLS-secured websockets, registers for
+    block connected and block disconnected notifications, and gets the current
+    block count
+  - btcwalletwebsockets
+    Connects to a btcwallet RPC server using TLS-secured websockets, registers
+    for notifications about changes to account balances, and gets a list of
+    unspent transaction outputs (utxos) the wallet can sign
 */
 package rpcclient

rpcclient/examples/lbcdblocknotify/README.md

@@ -1,15 +1,21 @@
-# lbcd Websockets Example
+# lbcdbloknotify
 
-This example shows how to use the rpcclient package to connect to a btcd RPC
-server using TLS-secured websockets, register for block connected and block
-disconnected notifications, and get the current block count.
+This bridge program subscribes to lbcd's notifications over websockets using the rpcclient package.
+Users can specify supported actions upon receiving this notifications.
 
-## Running the Example
+## Building(or Running) the Program
 
-The first step is to clone the lbcd package:
+Clone the lbcd package:
 
 ```bash
 $ git clone github.com/lbryio/lbcd
+$ cd lbcd/rpcclient/examples
+
+# build the program
+$ go build .
+
+# or directly run it (build implicitly behind the scene)
+$ go run .
 ```
 
 Display available options:
@@ -29,18 +35,31 @@ $ go run . -h
         Stratum server (default "lbrypool.net:3334")
   -stratumpass string
         Stratum server password (default "password")
+  -quiet
+        Do not print periodic logs
 ```
 
-Start the program:
+Running the program:
 
 ```bash
-$ go run . -stratumpass <STRATUM PASSWD> -rpcuser <RPC USERNAME> -rpcpass <RPC PASSWD>
+# Send stratum mining.update_block mesage upon receving block connected notifiations.
+$ go run . -rpcuser <RPC USERNAME> -rpcpass <RPC PASSWD> --notls -stratum <STRATUM SERVER> -stratumpass <STRATUM PASSWD>
 
-2022/01/10 23:16:21 NotifyBlocks: Registration Complete
-2022/01/10 23:16:21 Block count: 1093112
+2022/01/10 23:16:21 Current block count: 1093112
 ...
+
+# Execute a custome command (with blockhash) upon receving block connected notifiations.
+$ go run . -rpcuser <RPC USERNAME> -rpcpass <RPC PASSWD> --notls -run "echo %s"
 ```
 
+## Notes
+
+* Stratum TCP connection is persisted with auto-reconnect. (retry backoff increases from 1s to 60s maximum)
+
+* Stratum update_block jobs on previous notifications are canceled when a new notification arrives.
+  Usually, the jobs are so short and completed immediately.  However, if the Stratum connection is broken, this
+  prevents the bridge from accumulating stale jobs.
+
 ## License
 
 This example is licensed under the [copyfree](http://copyfree.org) ISC License.

rpcclient/examples/lbcdblocknotify/adapter.go

@@ -0,0 +1,20 @@
+package main
+
+import (
+	"github.com/lbryio/lbcd/wire"
+	"github.com/lbryio/lbcutil"
+)
+
+type eventBlockConected struct {
+	height int32
+	header *wire.BlockHeader
+	txns   []*lbcutil.Tx
+}
+
+type adapter struct {
+	*bridge
+}
+
+func (a *adapter) onFilteredBlockConnected(height int32, header *wire.BlockHeader, txns []*lbcutil.Tx) {
+	a.eventCh <- &eventBlockConected{height, header, txns}
+}

rpcclient/examples/lbcdblocknotify/bridge.go

@@ -0,0 +1,172 @@
+package main
+
+import (
+	"context"
+	"errors"
+	"fmt"
+	"log"
+	"net"
+	"os"
+	"os/exec"
+	"strings"
+	"sync"
+	"syscall"
+	"time"
+)
+
+type bridge struct {
+	ctx context.Context
+
+	prevJobContext context.Context
+	prevJobCancel  context.CancelFunc
+
+	eventCh chan interface{}
+	errorc  chan error
+	wg      sync.WaitGroup
+
+	stratum *stratumClient
+
+	customCmd string
+}
+
+func newBridge(stratumServer, stratumPass, coinid string) *bridge {
+
+	s := &bridge{
+		ctx:     context.Background(),
+		eventCh: make(chan interface{}),
+		errorc:  make(chan error),
+	}
+
+	if len(stratumServer) > 0 {
+		s.stratum = newStratumClient(stratumServer, stratumPass, coinid)
+	}
+
+	return s
+}
+
+func (b *bridge) start() {
+
+	if b.stratum != nil {
+		backoff := time.Second
+		for {
+			err := b.stratum.dial()
+			if err == nil {
+				break
+			}
+			log.Printf("WARN: stratum.dial() error: %s, retry in %s", err, backoff)
+			time.Sleep(backoff)
+			if backoff < 60*time.Second {
+				backoff += time.Second
+			}
+		}
+	}
+
+	for e := range b.eventCh {
+		switch e := e.(type) {
+		case *eventBlockConected:
+			b.handleFilteredBlockConnected(e)
+		default:
+			b.errorc <- fmt.Errorf("unknown event type: %T", e)
+			return
+		}
+	}
+}
+
+func (b *bridge) handleFilteredBlockConnected(e *eventBlockConected) {
+
+	if !*quiet {
+		log.Printf("Block connected: %s (%d) %v", e.header.BlockHash(), e.height, e.header.Timestamp)
+	}
+
+	hash := e.header.BlockHash().String()
+	height := e.height
+
+	// Cancel jobs on previous block. It's safe if they are already done.
+	if b.prevJobContext != nil {
+		select {
+		case <-b.prevJobContext.Done():
+			log.Printf("prev one canceled")
+		default:
+			b.prevJobCancel()
+		}
+	}
+
+	// Wait until all previous jobs are done or canceled.
+	b.wg.Wait()
+
+	// Create and save cancelable subcontext for new jobs.
+	ctx, cancel := context.WithCancel(b.ctx)
+	b.prevJobContext, b.prevJobCancel = ctx, cancel
+
+	if len(b.customCmd) > 0 {
+		go b.execCustomCommand(ctx, hash, height)
+	}
+
+	// Send stratum update block message
+	if b.stratum != nil {
+		go b.stratumUpdateBlock(ctx, hash, height)
+	}
+}
+
+func (s *bridge) stratumUpdateBlock(ctx context.Context, hash string, height int32) {
+	s.wg.Add(1)
+	defer s.wg.Done()
+
+	backoff := time.Second
+	retry := func(err error) {
+		if backoff < 60*time.Second {
+			backoff += time.Second
+		}
+		log.Printf("WARN: stratum.send() on block %d error: %s", height, err)
+		time.Sleep(backoff)
+		s.stratum.dial()
+	}
+
+	msg := stratumUpdateBlockMsg(*stratumPass, *coinid, hash)
+
+	for {
+		switch err := s.stratum.send(ctx, msg); {
+		case err == nil:
+			return
+		case errors.Is(err, context.Canceled):
+			log.Printf("INFO: stratum.send() on block %d: %s.", height, err)
+			return
+		case errors.Is(err, syscall.EPIPE):
+			errClose := s.stratum.conn.Close()
+			if errClose != nil {
+				log.Printf("WARN: stratum.conn.Close() on block %d: %s.", height, errClose)
+			}
+			retry(err)
+		case errors.Is(err, net.ErrClosed):
+			retry(err)
+		default:
+			retry(err)
+		}
+	}
+
+}
+
+func (s *bridge) execCustomCommand(ctx context.Context, hash string, height int32) {
+	s.wg.Add(1)
+	defer s.wg.Done()
+
+	cmd := strings.ReplaceAll(s.customCmd, "%s", hash)
+	err := doExecCustomCommand(ctx, cmd)
+	if err != nil {
+		log.Printf("ERROR: execCustomCommand on block %s(%d): %s", hash, height, err)
+	}
+}
+
+func doExecCustomCommand(ctx context.Context, cmd string) error {
+	strs := strings.Split(cmd, " ")
+	path, err := exec.LookPath(strs[0])
+	if errors.Is(err, exec.ErrDot) {
+		err = nil
+	}
+	if err != nil {
+		return err
+	}
+	c := exec.CommandContext(ctx, path, strs[1:]...)
+	c.Stdout = os.Stdout
+	return c.Run()
+}

rpcclient/examples/lbcdblocknotify/lbcdclient.go

@@ -0,0 +1,53 @@
+package main
+
+import (
+	"io/ioutil"
+	"log"
+	"path/filepath"
+
+	"github.com/lbryio/lbcd/rpcclient"
+)
+
+func newLbcdClient(server, user, pass string, notls bool, adpt adapter) *rpcclient.Client {
+
+	ntfnHandlers := rpcclient.NotificationHandlers{
+		OnFilteredBlockConnected: adpt.onFilteredBlockConnected,
+	}
+
+	// Config lbcd RPC client with websockets.
+	connCfg := &rpcclient.ConnConfig{
+		Host:       server,
+		Endpoint:   "ws",
+		User:       user,
+		Pass:       pass,
+		DisableTLS: true,
+	}
+
+	if !notls {
+		cert, err := ioutil.ReadFile(filepath.Join(lbcdHomeDir, "rpc.cert"))
+		if err != nil {
+			log.Fatalf("can't read lbcd certificate: %s", err)
+		}
+		connCfg.Certificates = cert
+		connCfg.DisableTLS = false
+	}
+
+	client, err := rpcclient.New(connCfg, &ntfnHandlers)
+	if err != nil {
+		log.Fatalf("can't create rpc client: %s", err)
+	}
+
+	// Register for block connect and disconnect notifications.
+	if err = client.NotifyBlocks(); err != nil {
+		log.Fatalf("can't register block notification: %s", err)
+	}
+
+	// Get the current block count.
+	blockCount, err := client.GetBlockCount()
+	if err != nil {
+		log.Fatalf("can't get block count: %s", err)
+	}
+	log.Printf("Current block count: %d", blockCount)
+
+	return client
+}

rpcclient/examples/lbcdblocknotify/main.go

@@ -1,103 +1,63 @@
-// Copyright (c) 2014-2017 The btcsuite developers
-// Use of this source code is governed by an ISC
-// license that can be found in the LICENSE file.
-
 package main
 
 import (
 	"flag"
-	"fmt"
-	"io/ioutil"
 	"log"
-	"net"
+	"os/exec"
 	"path/filepath"
+	"strings"
 
-	"github.com/lbryio/lbcd/rpcclient"
-	"github.com/lbryio/lbcd/wire"
 	"github.com/lbryio/lbcutil"
 )
 
-func send(stratum, stratumPass, coinid, blockHash string) error {
-	addr, err := net.ResolveTCPAddr("tcp", stratum)
-	if err != nil {
-		return fmt.Errorf("can't resolve addr: %w", err)
-	}
-
-	conn, err := net.DialTCP("tcp", nil, addr)
-	if err != nil {
-		return fmt.Errorf("can't dial tcp: %w", err)
-	}
-	defer conn.Close()
-
-	msg := fmt.Sprintf(`{"id":1,"method":"mining.update_block","params":[%q,%q,%q]}`,
-		stratumPass, coinid, blockHash)
-
-	_, err = conn.Write([]byte(msg))
-	if err != nil {
-		return fmt.Errorf("can't write message: %w", err)
-	}
-
-	return nil
-}
+var (
+	lbcdHomeDir = lbcutil.AppDataDir("lbcd", false)
+	defaultCert = filepath.Join(lbcdHomeDir, "rpc.cert")
+)
+var (
+	coinid        = flag.String("coinid", "1425", "Coin ID")
+	stratumServer = flag.String("stratum", "", "Stratum server")
+	stratumPass   = flag.String("stratumpass", "", "Stratum server password")
+	rpcserver     = flag.String("rpcserver", "localhost:9245", "LBCD RPC server")
+	rpcuser       = flag.String("rpcuser", "rpcuser", "LBCD RPC username")
+	rpcpass       = flag.String("rpcpass", "rpcpass", "LBCD RPC password")
+	rpccert       = flag.String("rpccert", defaultCert, "LBCD RPC certificate")
+	notls         = flag.Bool("notls", false, "Connect to LBCD with TLS disabled")
+	run           = flag.String("run", "", "Run custom shell command")
+	quiet         = flag.Bool("quiet", false, "Do not print logs")
+)
 
 func main() {
 
-	var (
-		coinid      = flag.String("coinid", "1425", "Coin ID")
-		stratum     = flag.String("stratum", "lbrypool.net:3334", "Stratum server")
-		stratumPass = flag.String("stratumpass", "password", "Stratum server password")
-		rpcserver   = flag.String("rpcserver", "localhost:9245", "LBCD RPC server")
-		rpcuser     = flag.String("rpcuser", "rpcuser", "LBCD RPC username")
-		rpcpass     = flag.String("rpcpass", "rpcpass", "LBCD RPC password")
-		notls       = flag.Bool("notls", false, "Connect to LBCD with TLS disabled")
-	)
-
 	flag.Parse()
 
-	ntfnHandlers := rpcclient.NotificationHandlers{
-		OnFilteredBlockConnected: func(height int32, header *wire.BlockHeader, txns []*lbcutil.Tx) {
+	// Setup notification handler
+	b := newBridge(*stratumServer, *stratumPass, *coinid)
 
-			blockHash := header.BlockHash().String()
-
-			log.Printf("Block connected: %v (%d) %v", blockHash, height, header.Timestamp)
-
-			if err := send(*stratum, *stratumPass, *coinid, blockHash); err != nil {
-				log.Printf("ERROR: failed to notify stratum: %s", err)
-			}
-		},
+	if len(*run) > 0 {
+		// Check if ccommand exists.
+		strs := strings.Split(*run, " ")
+		cmd := strs[0]
+		_, err := exec.LookPath(cmd)
+		if err != nil {
+			log.Fatalf("ERROR: %s not found: %s", cmd, err)
+		}
+		b.customCmd = *run
 	}
 
-	// Connect to local lbcd RPC server using websockets.
-	lbcdHomeDir := lbcutil.AppDataDir("lbcd", false)
-	certs, err := ioutil.ReadFile(filepath.Join(lbcdHomeDir, "rpc.cert"))
-	if err != nil {
-		log.Fatalf("can't read lbcd certificate: %s", err)
-	}
-	connCfg := &rpcclient.ConnConfig{
-		Host:         *rpcserver,
-		Endpoint:     "ws",
-		User:         *rpcuser,
-		Pass:         *rpcpass,
-		Certificates: certs,
-		DisableTLS:   *notls,
-	}
-	client, err := rpcclient.New(connCfg, &ntfnHandlers)
-	if err != nil {
-		log.Fatalf("can't create rpc client: %s", err)
-	}
+	// Start the eventt handler.
+	go b.start()
 
-	// Register for block connect and disconnect notifications.
-	if err = client.NotifyBlocks(); err != nil {
-		log.Fatalf("can't register block notification: %s", err)
-	}
-	log.Printf("NotifyBlocks: Registration Complete")
+	// Adaptater receives lbcd notifications, and emit events.
+	adpt := adapter{b}
 
-	// Get the current block count.
-	blockCount, err := client.GetBlockCount()
-	if err != nil {
-		log.Fatalf("can't get block count: %s", err)
-	}
-	log.Printf("Block count: %d", blockCount)
+	client := newLbcdClient(*rpcserver, *rpcuser, *rpcpass, *notls, adpt)
+
+	go func() {
+		err := <-b.errorc
+		log.Fatalf("ERROR: %s", err)
+		client.Shutdown()
+	}()
 
 	// Wait until the client either shuts down gracefully (or the user
 	// terminates the process with Ctrl+C).

rpcclient/examples/lbcdblocknotify/stratumclient.go

@@ -0,0 +1,56 @@
+package main
+
+import (
+	"context"
+	"fmt"
+	"net"
+)
+
+type stratumClient struct {
+	server string
+	passwd string
+	coinid string
+	conn   *net.TCPConn
+}
+
+func newStratumClient(server, passwd, coinid string) *stratumClient {
+
+	return &stratumClient{
+		server: server,
+	}
+}
+
+func (c *stratumClient) dial() error {
+
+	addr, err := net.ResolveTCPAddr("tcp", c.server)
+	if err != nil {
+		return fmt.Errorf("resolve tcp addr: %w", err)
+	}
+
+	conn, err := net.DialTCP("tcp", nil, addr)
+	if err != nil {
+		return fmt.Errorf("dial tcp: %w", err)
+	}
+	c.conn = conn
+
+	return nil
+}
+
+func (c *stratumClient) send(ctx context.Context, msg string) error {
+
+	select {
+	case <-ctx.Done():
+		return ctx.Err()
+	default:
+	}
+
+	_, err := c.conn.Write([]byte(msg))
+
+	return err
+}
+
+func stratumUpdateBlockMsg(stratumPass, coinid, blockHash string) string {
+
+	return fmt.Sprintf(`{"id":1,"method":"mining.update_block","params":[%q,%s,%q]}`,
+		stratumPass, coinid, blockHash)
+}

rpcclient/extensions.go

@@ -56,7 +56,8 @@ func (c *Client) DebugLevelAsync(levelSpec string) FutureDebugLevelResult {
 // specification.
 //
 // The levelspec can be either a debug level or of the form:
-// 	<subsystem>=<level>,<subsystem2>=<level2>,...
+//
+//	<subsystem>=<level>,<subsystem2>=<level2>,...
 //
 // Additionally, the special keyword 'show' can be used to get a list of the
 // available subsystems.

rpcclient/infrastructure.go

@@ -774,7 +774,8 @@ func (c *Client) handleSendPostMessage(jReq *jsonRequest) {
 	tries := 10
 	for i := 0; tries == 0 || i < tries; i++ {
 		bodyReader := bytes.NewReader(jReq.marshalledJSON)
-		httpReq, err := http.NewRequest("POST", url, bodyReader)
+		var httpReq *http.Request
+		httpReq, err = http.NewRequest("POST", url, bodyReader)
 		if err != nil {
 			jReq.responseChan <- &Response{result: nil, err: err}
 			return
@@ -786,7 +787,8 @@ func (c *Client) handleSendPostMessage(jReq *jsonRequest) {
 		}
 
 		// Configure basic access authorization.
-		user, pass, err := c.config.getAuth()
+		var user, pass string
+		user, pass, err = c.config.getAuth()
 		if err != nil {
 			jReq.responseChan <- &Response{result: nil, err: err}
 			return

rpcclient/net.go

@@ -355,6 +355,75 @@ func (c *Client) GetPeerInfo() ([]btcjson.GetPeerInfoResult, error) {
 	return c.GetPeerInfoAsync().Receive()
 }
 
+// FutureListBannedResult is a future promise to deliver the result of a
+// ListBannedAsync RPC invocation (or an applicable error).
+type FutureListBannedResult chan *Response
+
+// Receive waits for the Response promised by the future and returns  data about
+// each connected network peer.
+func (r FutureListBannedResult) Receive() ([]btcjson.ListBannedResult, error) {
+	res, err := ReceiveFuture(r)
+	if err != nil {
+		return nil, err
+	}
+
+	// Unmarshal result as an array of ListBanned result objects.
+	var bannedPeers []btcjson.ListBannedResult
+	err = json.Unmarshal(res, &bannedPeers)
+	if err != nil {
+		return nil, err
+	}
+
+	return bannedPeers, nil
+}
+
+// SetBanCommand enumerates the available commands that the SetBanCommand function
+// accepts.
+type SetBanCommand string
+
+// Constants used to indicate the command for the SetBanCommand function.
+const (
+	// SBAdd indicates the specified host should be added as a banned
+	// peer.
+	SBAdd SetBanCommand = "add"
+
+	// SBRemove indicates the specified peer should be removed.
+	SBRemove SetBanCommand = "remove"
+)
+
+// String returns the SetBanCommand in human-readable form.
+func (cmd SetBanCommand) String() string {
+	return string(cmd)
+}
+
+// FutureSetBanResult is a future promise to deliver the result of an
+// SetBanAsync RPC invocation (or an applicable error).
+type FutureSetBanResult chan *Response
+
+// Receive waits for the Response promised by the future and returns an error if
+// any occurred when performing the specified command.
+func (r FutureSetBanResult) Receive() error {
+	_, err := ReceiveFuture(r)
+	return err
+}
+
+// SetBanAsync returns an instance of a type that can be used to get the result
+// of the RPC at some future time by invoking the Receive function on the
+// returned instance.
+func (c *Client) SetBanAsync(addr string, command string, banTime *int,
+	absolute *bool) FutureSetBanResult {
+	cmd := btcjson.NewSetBanCmd(addr, btcjson.SetBanSubCmd(command), banTime,
+		absolute)
+	return c.SendCmd(cmd)
+}
+
+// SetBan attempts to perform the passed command on the passed persistent peer.
+// For example, it can be used to add or a remove a banned peer.
+func (c *Client) SetBan(addr string, command string, banTime *int,
+	absolute *bool) error {
+	return c.SetBanAsync(addr, command, banTime, absolute).Receive()
+}
+
 // FutureGetNetTotalsResult is a future promise to deliver the result of a
 // GetNetTotalsAsync RPC invocation (or an applicable error).
 type FutureGetNetTotalsResult chan *Response

rpcclient/rawtransactions.go

@@ -291,13 +291,18 @@ func (r FutureCreateRawTransactionResult) Receive() (*wire.MsgTx, error) {
 //
 // See CreateRawTransaction for the blocking version and more details.
 func (c *Client) CreateRawTransactionAsync(inputs []btcjson.TransactionInput,
-	amounts map[btcutil.Address]btcutil.Amount, lockTime *int64) FutureCreateRawTransactionResult {
+	outputs map[btcutil.Address]interface{}, lockTime *int64) FutureCreateRawTransactionResult {
 
-	convertedAmts := make(map[string]float64, len(amounts))
-	for addr, amount := range amounts {
-		convertedAmts[addr.String()] = amount.ToBTC()
+	convertedData := make(map[string]interface{}, len(outputs))
+	for key, value := range outputs {
+		switch val := value.(type) {
+		case btcutil.Amount:
+			convertedData[key.String()] = val.ToBTC()
+		case string:
+			convertedData[key.String()] = val
+		}
 	}
-	cmd := btcjson.NewCreateRawTransactionCmd(inputs, convertedAmts, lockTime)
+	cmd := btcjson.NewCreateRawTransactionCmd(inputs, convertedData, lockTime)
 	return c.SendCmd(cmd)
 }
 
@@ -305,9 +310,9 @@ func (c *Client) CreateRawTransactionAsync(inputs []btcjson.TransactionInput,
 // and sending to the provided addresses. If the inputs are either nil or an
 // empty slice, it is interpreted as an empty slice.
 func (c *Client) CreateRawTransaction(inputs []btcjson.TransactionInput,
-	amounts map[btcutil.Address]btcutil.Amount, lockTime *int64) (*wire.MsgTx, error) {
+	outputs map[btcutil.Address]interface{}, lockTime *int64) (*wire.MsgTx, error) {
 
-	return c.CreateRawTransactionAsync(inputs, amounts, lockTime).Receive()
+	return c.CreateRawTransactionAsync(inputs, outputs, lockTime).Receive()
 }
 
 // FutureSendRawTransactionResult is a future promise to deliver the result

rpcclient/wallet.go

@@ -536,9 +536,10 @@ func (r FutureSendToAddressResult) Receive() (*chainhash.Hash, error) {
 // returned instance.
 //
 // See SendToAddress for the blocking version and more details.
-func (c *Client) SendToAddressAsync(address btcutil.Address, amount btcutil.Amount) FutureSendToAddressResult {
+func (c *Client) SendToAddressAsync(address btcutil.Address, amount btcutil.Amount,
+	addrType *string) FutureSendToAddressResult {
 	addr := address.EncodeAddress()
-	cmd := btcjson.NewSendToAddressCmd(addr, amount.ToBTC(), nil, nil)
+	cmd := btcjson.NewSendToAddressCmd(addr, amount.ToBTC(), addrType, nil, nil)
 	return c.SendCmd(cmd)
 }
 
@@ -550,8 +551,9 @@ func (c *Client) SendToAddressAsync(address btcutil.Address, amount btcutil.Amou
 //
 // NOTE: This function requires to the wallet to be unlocked.  See the
 // WalletPassphrase function for more details.
-func (c *Client) SendToAddress(address btcutil.Address, amount btcutil.Amount) (*chainhash.Hash, error) {
-	return c.SendToAddressAsync(address, amount).Receive()
+func (c *Client) SendToAddress(address btcutil.Address, amount btcutil.Amount,
+	addrType *string) (*chainhash.Hash, error) {
+	return c.SendToAddressAsync(address, amount, addrType).Receive()
 }
 
 // SendToAddressCommentAsync returns an instance of a type that can be used to
@@ -560,12 +562,12 @@ func (c *Client) SendToAddress(address btcutil.Address, amount btcutil.Amount) (
 //
 // See SendToAddressComment for the blocking version and more details.
 func (c *Client) SendToAddressCommentAsync(address btcutil.Address,
-	amount btcutil.Amount, comment,
+	amount btcutil.Amount, addrType *string, comment string,
 	commentTo string) FutureSendToAddressResult {
 
 	addr := address.EncodeAddress()
-	cmd := btcjson.NewSendToAddressCmd(addr, amount.ToBTC(), &comment,
-		&commentTo)
+	cmd := btcjson.NewSendToAddressCmd(addr, amount.ToBTC(), addrType,
+		&comment, &commentTo)
 	return c.SendCmd(cmd)
 }
 
@@ -581,9 +583,10 @@ func (c *Client) SendToAddressCommentAsync(address btcutil.Address,
 //
 // NOTE: This function requires to the wallet to be unlocked.  See the
 // WalletPassphrase function for more details.
-func (c *Client) SendToAddressComment(address btcutil.Address, amount btcutil.Amount, comment, commentTo string) (*chainhash.Hash, error) {
-	return c.SendToAddressCommentAsync(address, amount, comment,
-		commentTo).Receive()
+func (c *Client) SendToAddressComment(address btcutil.Address, amount btcutil.Amount,
+	addrType *string, comment, commentTo string) (*chainhash.Hash, error) {
+	return c.SendToAddressCommentAsync(address, amount, addrType,
+		comment, commentTo).Receive()
 }
 
 // FutureSendFromResult is a future promise to deliver the result of a
@@ -615,10 +618,11 @@ func (r FutureSendFromResult) Receive() (*chainhash.Hash, error) {
 // returned instance.
 //
 // See SendFrom for the blocking version and more details.
-func (c *Client) SendFromAsync(fromAccount string, toAddress btcutil.Address, amount btcutil.Amount) FutureSendFromResult {
+func (c *Client) SendFromAsync(fromAccount string, toAddress btcutil.Address,
+	amount btcutil.Amount, addrType *string) FutureSendFromResult {
 	addr := toAddress.EncodeAddress()
 	cmd := btcjson.NewSendFromCmd(fromAccount, addr, amount.ToBTC(), nil,
-		nil, nil)
+		addrType, nil, nil)
 	return c.SendCmd(cmd)
 }
 
@@ -630,8 +634,8 @@ func (c *Client) SendFromAsync(fromAccount string, toAddress btcutil.Address, am
 //
 // NOTE: This function requires to the wallet to be unlocked.  See the
 // WalletPassphrase function for more details.
-func (c *Client) SendFrom(fromAccount string, toAddress btcutil.Address, amount btcutil.Amount) (*chainhash.Hash, error) {
-	return c.SendFromAsync(fromAccount, toAddress, amount).Receive()
+func (c *Client) SendFrom(fromAccount string, toAddress btcutil.Address, amount btcutil.Amount, addrType *string) (*chainhash.Hash, error) {
+	return c.SendFromAsync(fromAccount, toAddress, amount, addrType).Receive()
 }
 
 // SendFromMinConfAsync returns an instance of a type that can be used to get
@@ -639,10 +643,12 @@ func (c *Client) SendFrom(fromAccount string, toAddress btcutil.Address, amount
 // the returned instance.
 //
 // See SendFromMinConf for the blocking version and more details.
-func (c *Client) SendFromMinConfAsync(fromAccount string, toAddress btcutil.Address, amount btcutil.Amount, minConfirms int) FutureSendFromResult {
+func (c *Client) SendFromMinConfAsync(fromAccount string,
+	toAddress btcutil.Address, amount btcutil.Amount,
+	minConfirms int, addrType *string) FutureSendFromResult {
 	addr := toAddress.EncodeAddress()
 	cmd := btcjson.NewSendFromCmd(fromAccount, addr, amount.ToBTC(),
-		&minConfirms, nil, nil)
+		&minConfirms, addrType, nil, nil)
 	return c.SendCmd(cmd)
 }
 
@@ -655,9 +661,10 @@ func (c *Client) SendFromMinConfAsync(fromAccount string, toAddress btcutil.Addr
 //
 // NOTE: This function requires to the wallet to be unlocked.  See the
 // WalletPassphrase function for more details.
-func (c *Client) SendFromMinConf(fromAccount string, toAddress btcutil.Address, amount btcutil.Amount, minConfirms int) (*chainhash.Hash, error) {
+func (c *Client) SendFromMinConf(fromAccount string, toAddress btcutil.Address,
+	amount btcutil.Amount, minConfirms int, addrType *string) (*chainhash.Hash, error) {
 	return c.SendFromMinConfAsync(fromAccount, toAddress, amount,
-		minConfirms).Receive()
+		minConfirms, addrType).Receive()
 }
 
 // SendFromCommentAsync returns an instance of a type that can be used to get
@@ -667,11 +674,11 @@ func (c *Client) SendFromMinConf(fromAccount string, toAddress btcutil.Address,
 // See SendFromComment for the blocking version and more details.
 func (c *Client) SendFromCommentAsync(fromAccount string,
 	toAddress btcutil.Address, amount btcutil.Amount, minConfirms int,
-	comment, commentTo string) FutureSendFromResult {
+	addrType *string, comment, commentTo string) FutureSendFromResult {
 
 	addr := toAddress.EncodeAddress()
 	cmd := btcjson.NewSendFromCmd(fromAccount, addr, amount.ToBTC(),
-		&minConfirms, &comment, &commentTo)
+		&minConfirms, addrType, &comment, &commentTo)
 	return c.SendCmd(cmd)
 }
 
@@ -687,11 +694,11 @@ func (c *Client) SendFromCommentAsync(fromAccount string,
 // NOTE: This function requires to the wallet to be unlocked.  See the
 // WalletPassphrase function for more details.
 func (c *Client) SendFromComment(fromAccount string, toAddress btcutil.Address,
-	amount btcutil.Amount, minConfirms int,
+	amount btcutil.Amount, minConfirms int, addrType *string,
 	comment, commentTo string) (*chainhash.Hash, error) {
 
 	return c.SendFromCommentAsync(fromAccount, toAddress, amount,
-		minConfirms, comment, commentTo).Receive()
+		minConfirms, addrType, comment, commentTo).Receive()
 }
 
 // FutureSendManyResult is a future promise to deliver the result of a
@@ -728,7 +735,7 @@ func (c *Client) SendManyAsync(fromAccount string, amounts map[btcutil.Address]b
 	for addr, amount := range amounts {
 		convertedAmounts[addr.EncodeAddress()] = amount.ToBTC()
 	}
-	cmd := btcjson.NewSendManyCmd(fromAccount, convertedAmounts, nil, nil)
+	cmd := btcjson.NewSendManyCmd(fromAccount, convertedAmounts, nil, nil, nil)
 	return c.SendCmd(cmd)
 }
 
@@ -751,14 +758,14 @@ func (c *Client) SendMany(fromAccount string, amounts map[btcutil.Address]btcuti
 // See SendManyMinConf for the blocking version and more details.
 func (c *Client) SendManyMinConfAsync(fromAccount string,
 	amounts map[btcutil.Address]btcutil.Amount,
-	minConfirms int) FutureSendManyResult {
+	minConfirms int, addrType *string) FutureSendManyResult {
 
 	convertedAmounts := make(map[string]float64, len(amounts))
 	for addr, amount := range amounts {
 		convertedAmounts[addr.EncodeAddress()] = amount.ToBTC()
 	}
 	cmd := btcjson.NewSendManyCmd(fromAccount, convertedAmounts,
-		&minConfirms, nil)
+		&minConfirms, nil, addrType)
 	return c.SendCmd(cmd)
 }
 
@@ -773,9 +780,10 @@ func (c *Client) SendManyMinConfAsync(fromAccount string,
 // WalletPassphrase function for more details.
 func (c *Client) SendManyMinConf(fromAccount string,
 	amounts map[btcutil.Address]btcutil.Amount,
-	minConfirms int) (*chainhash.Hash, error) {
+	minConfirms int, addrType *string) (*chainhash.Hash, error) {
 
-	return c.SendManyMinConfAsync(fromAccount, amounts, minConfirms).Receive()
+	return c.SendManyMinConfAsync(fromAccount, amounts, minConfirms,
+		addrType).Receive()
 }
 
 // SendManyCommentAsync returns an instance of a type that can be used to get
@@ -785,14 +793,14 @@ func (c *Client) SendManyMinConf(fromAccount string,
 // See SendManyComment for the blocking version and more details.
 func (c *Client) SendManyCommentAsync(fromAccount string,
 	amounts map[btcutil.Address]btcutil.Amount, minConfirms int,
-	comment string) FutureSendManyResult {
+	addrType *string, comment string) FutureSendManyResult {
 
 	convertedAmounts := make(map[string]float64, len(amounts))
 	for addr, amount := range amounts {
 		convertedAmounts[addr.EncodeAddress()] = amount.ToBTC()
 	}
 	cmd := btcjson.NewSendManyCmd(fromAccount, convertedAmounts,
-		&minConfirms, &comment)
+		&minConfirms, &comment, addrType)
 	return c.SendCmd(cmd)
 }
 
@@ -808,10 +816,10 @@ func (c *Client) SendManyCommentAsync(fromAccount string,
 // WalletPassphrase function for more details.
 func (c *Client) SendManyComment(fromAccount string,
 	amounts map[btcutil.Address]btcutil.Amount, minConfirms int,
-	comment string) (*chainhash.Hash, error) {
+	addrType *string, comment string) (*chainhash.Hash, error) {
 
 	return c.SendManyCommentAsync(fromAccount, amounts, minConfirms,
-		comment).Receive()
+		addrType, comment).Receive()
 }
 
 // *************************
@@ -1016,10 +1024,10 @@ func (c *Client) CreateWalletAsync(name string, opts ...CreateWalletOpt) FutureC
 //
 // Optional parameters can be specified using functional-options pattern. The
 // following functions are available:
-//   * WithCreateWalletDisablePrivateKeys
-//   * WithCreateWalletBlank
-//   * WithCreateWalletPassphrase
-//   * WithCreateWalletAvoidReuse
+//   - WithCreateWalletDisablePrivateKeys
+//   - WithCreateWalletBlank
+//   - WithCreateWalletPassphrase
+//   - WithCreateWalletAvoidReuse
 func (c *Client) CreateWallet(name string, opts ...CreateWalletOpt) (*btcjson.CreateWalletResult, error) {
 	return c.CreateWalletAsync(name, opts...).Receive()
 }
@@ -1135,8 +1143,8 @@ func (r FutureGetRawChangeAddressResult) Receive() (btcutil.Address, error) {
 // function on the returned instance.
 //
 // See GetRawChangeAddress for the blocking version and more details.
-func (c *Client) GetRawChangeAddressAsync(account string) FutureGetRawChangeAddressResult {
-	cmd := btcjson.NewGetRawChangeAddressCmd(&account)
+func (c *Client) GetRawChangeAddressAsync(account *string) FutureGetRawChangeAddressResult {
+	cmd := btcjson.NewGetRawChangeAddressCmd(account)
 	result := FutureGetRawChangeAddressResult{
 		network:         c.chainParams,
 		responseChannel: c.SendCmd(cmd),
@@ -1147,7 +1155,7 @@ func (c *Client) GetRawChangeAddressAsync(account string) FutureGetRawChangeAddr
 // GetRawChangeAddress returns a new address for receiving change that will be
 // associated with the provided account.  Note that this is only for raw
 // transactions and NOT for normal use.
-func (c *Client) GetRawChangeAddress(account string) (btcutil.Address, error) {
+func (c *Client) GetRawChangeAddress(account *string) (btcutil.Address, error) {
 	return c.GetRawChangeAddressAsync(account).Receive()
 }
 
@@ -1226,7 +1234,7 @@ func (r FutureGetAccountAddressResult) Receive() (btcutil.Address, error) {
 // the returned instance.
 //
 // See GetAccountAddress for the blocking version and more details.
-func (c *Client) GetAccountAddressAsync(account string) FutureGetAccountAddressResult {
+func (c *Client) GetAccountAddressAsync(account *string) FutureGetAccountAddressResult {
 	cmd := btcjson.NewGetAccountAddressCmd(account)
 	result := FutureGetAccountAddressResult{
 		network:         c.chainParams,
@@ -1237,7 +1245,7 @@ func (c *Client) GetAccountAddressAsync(account string) FutureGetAccountAddressR
 
 // GetAccountAddress returns the current Bitcoin address for receiving payments
 // to the specified account.
-func (c *Client) GetAccountAddress(account string) (btcutil.Address, error) {
+func (c *Client) GetAccountAddress(account *string) (btcutil.Address, error) {
 	return c.GetAccountAddressAsync(account).Receive()
 }
 
@@ -1279,33 +1287,6 @@ func (c *Client) GetAccount(address btcutil.Address) (string, error) {
 	return c.GetAccountAsync(address).Receive()
 }
 
-// FutureSetAccountResult is a future promise to deliver the result of a
-// SetAccountAsync RPC invocation (or an applicable error).
-type FutureSetAccountResult chan *Response
-
-// Receive waits for the Response promised by the future and returns the result
-// of setting the account to be associated with the passed address.
-func (r FutureSetAccountResult) Receive() error {
-	_, err := ReceiveFuture(r)
-	return err
-}
-
-// SetAccountAsync returns an instance of a type that can be used to get the
-// result of the RPC at some future time by invoking the Receive function on the
-// returned instance.
-//
-// See SetAccount for the blocking version and more details.
-func (c *Client) SetAccountAsync(address btcutil.Address, account string) FutureSetAccountResult {
-	addr := address.EncodeAddress()
-	cmd := btcjson.NewSetAccountCmd(addr, account)
-	return c.SendCmd(cmd)
-}
-
-// SetAccount sets the account associated with the passed address.
-func (c *Client) SetAccount(address btcutil.Address, account string) error {
-	return c.SetAccountAsync(address, account).Receive()
-}
-
 // FutureGetAddressesByAccountResult is a future promise to deliver the result
 // of a GetAddressesByAccountAsync RPC invocation (or an applicable error).
 type FutureGetAddressesByAccountResult struct {
@@ -1344,7 +1325,7 @@ func (r FutureGetAddressesByAccountResult) Receive() ([]btcutil.Address, error)
 // function on the returned instance.
 //
 // See GetAddressesByAccount for the blocking version and more details.
-func (c *Client) GetAddressesByAccountAsync(account string) FutureGetAddressesByAccountResult {
+func (c *Client) GetAddressesByAccountAsync(account *string) FutureGetAddressesByAccountResult {
 	cmd := btcjson.NewGetAddressesByAccountCmd(account)
 	result := FutureGetAddressesByAccountResult{
 		network:         c.chainParams,
@@ -1355,7 +1336,7 @@ func (c *Client) GetAddressesByAccountAsync(account string) FutureGetAddressesBy
 
 // GetAddressesByAccount returns the list of addresses associated with the
 // passed account.
-func (c *Client) GetAddressesByAccount(account string) ([]btcutil.Address, error) {
+func (c *Client) GetAddressesByAccount(account *string) ([]btcutil.Address, error) {
 	return c.GetAddressesByAccountAsync(account).Receive()
 }
 
@@ -1382,74 +1363,6 @@ func (r FutureMoveResult) Receive() (bool, error) {
 	return moveResult, nil
 }
 
-// MoveAsync returns an instance of a type that can be used to get the result of
-// the RPC at some future time by invoking the Receive function on the returned
-// instance.
-//
-// See Move for the blocking version and more details.
-func (c *Client) MoveAsync(fromAccount, toAccount string, amount btcutil.Amount) FutureMoveResult {
-	cmd := btcjson.NewMoveCmd(fromAccount, toAccount, amount.ToBTC(), nil,
-		nil)
-	return c.SendCmd(cmd)
-}
-
-// Move moves specified amount from one account in your wallet to another.  Only
-// funds with the default number of minimum confirmations will be used.
-//
-// See MoveMinConf and MoveComment for different options.
-func (c *Client) Move(fromAccount, toAccount string, amount btcutil.Amount) (bool, error) {
-	return c.MoveAsync(fromAccount, toAccount, amount).Receive()
-}
-
-// MoveMinConfAsync returns an instance of a type that can be used to get the
-// result of the RPC at some future time by invoking the Receive function on the
-// returned instance.
-//
-// See MoveMinConf for the blocking version and more details.
-func (c *Client) MoveMinConfAsync(fromAccount, toAccount string,
-	amount btcutil.Amount, minConfirms int) FutureMoveResult {
-
-	cmd := btcjson.NewMoveCmd(fromAccount, toAccount, amount.ToBTC(),
-		&minConfirms, nil)
-	return c.SendCmd(cmd)
-}
-
-// MoveMinConf moves specified amount from one account in your wallet to
-// another.  Only funds with the passed number of minimum confirmations will be
-// used.
-//
-// See Move to use the default number of minimum confirmations and MoveComment
-// for additional options.
-func (c *Client) MoveMinConf(fromAccount, toAccount string, amount btcutil.Amount, minConf int) (bool, error) {
-	return c.MoveMinConfAsync(fromAccount, toAccount, amount, minConf).Receive()
-}
-
-// MoveCommentAsync returns an instance of a type that can be used to get the
-// result of the RPC at some future time by invoking the Receive function on the
-// returned instance.
-//
-// See MoveComment for the blocking version and more details.
-func (c *Client) MoveCommentAsync(fromAccount, toAccount string,
-	amount btcutil.Amount, minConfirms int, comment string) FutureMoveResult {
-
-	cmd := btcjson.NewMoveCmd(fromAccount, toAccount, amount.ToBTC(),
-		&minConfirms, &comment)
-	return c.SendCmd(cmd)
-}
-
-// MoveComment moves specified amount from one account in your wallet to
-// another and stores the provided comment in the wallet.  The comment
-// parameter is only available in the wallet.  Only funds with the passed number
-// of minimum confirmations will be used.
-//
-// See Move and MoveMinConf to use defaults.
-func (c *Client) MoveComment(fromAccount, toAccount string, amount btcutil.Amount,
-	minConf int, comment string) (bool, error) {
-
-	return c.MoveCommentAsync(fromAccount, toAccount, amount, minConf,
-		comment).Receive()
-}
-
 // FutureRenameAccountResult is a future promise to deliver the result of a
 // RenameAccountAsync RPC invocation (or an applicable error).
 type FutureRenameAccountResult chan *Response
@@ -1804,7 +1717,7 @@ func (r FutureGetReceivedByAccountResult) Receive() (btcutil.Amount, error) {
 // function on the returned instance.
 //
 // See GetReceivedByAccount for the blocking version and more details.
-func (c *Client) GetReceivedByAccountAsync(account string) FutureGetReceivedByAccountResult {
+func (c *Client) GetReceivedByAccountAsync(account *string) FutureGetReceivedByAccountResult {
 	cmd := btcjson.NewGetReceivedByAccountCmd(account, nil)
 	return c.SendCmd(cmd)
 }
@@ -1814,7 +1727,7 @@ func (c *Client) GetReceivedByAccountAsync(account string) FutureGetReceivedByAc
 //
 // See GetReceivedByAccountMinConf to override the minimum number of
 // confirmations.
-func (c *Client) GetReceivedByAccount(account string) (btcutil.Amount, error) {
+func (c *Client) GetReceivedByAccount(account *string) (btcutil.Amount, error) {
 	return c.GetReceivedByAccountAsync(account).Receive()
 }
 
@@ -1823,8 +1736,8 @@ func (c *Client) GetReceivedByAccount(account string) (btcutil.Amount, error) {
 // function on the returned instance.
 //
 // See GetReceivedByAccountMinConf for the blocking version and more details.
-func (c *Client) GetReceivedByAccountMinConfAsync(account string, minConfirms int) FutureGetReceivedByAccountResult {
-	cmd := btcjson.NewGetReceivedByAccountCmd(account, &minConfirms)
+func (c *Client) GetReceivedByAccountMinConfAsync(account *string, minConfirms *int) FutureGetReceivedByAccountResult {
+	cmd := btcjson.NewGetReceivedByAccountCmd(account, minConfirms)
 	return c.SendCmd(cmd)
 }
 
@@ -1833,7 +1746,7 @@ func (c *Client) GetReceivedByAccountMinConfAsync(account string, minConfirms in
 // confirmations.
 //
 // See GetReceivedByAccount to use the default minimum number of confirmations.
-func (c *Client) GetReceivedByAccountMinConf(account string, minConfirms int) (btcutil.Amount, error) {
+func (c *Client) GetReceivedByAccountMinConf(account *string, minConfirms *int) (btcutil.Amount, error) {
 	return c.GetReceivedByAccountMinConfAsync(account, minConfirms).Receive()
 }
 
@@ -2122,6 +2035,44 @@ func (c *Client) ListReceivedByAddressIncludeEmpty(minConfirms int, includeEmpty
 		includeEmpty).Receive()
 }
 
+// FutureRescanBlockchainResult is a future promise to deliver the error result of a
+// RescanBlockchainAsync RPC invocation.
+type FutureRescanBlockchainResult chan *Response
+
+// Receive waits for the Response promised by the future and returns the result
+// of locking or unlocking the unspent output(s).
+func (r FutureRescanBlockchainResult) Receive() (*btcjson.RescanBlockchainResult, error) {
+	res, err := ReceiveFuture(r)
+	if err != nil {
+		return nil, err
+	}
+
+	// Unmarshal as an array of listreceivedbyaddress result objects.
+	var received btcjson.RescanBlockchainResult
+	err = json.Unmarshal(res, &received)
+	if err != nil {
+		return nil, err
+	}
+
+	return &received, nil
+}
+
+// RescanBlockchainAsync returns an instance of a type that can be used to get the
+// result of the RPC at some future time by invoking the Receive function on the
+// returned instance.
+//
+// See RescanBlockchain for the blocking version and more details.
+func (c *Client) RescanBlockchainAsync(startHeight *int32, stopHeight *int32) FutureRescanBlockchainResult {
+	cmd := btcjson.NewRescanBlockchainCmd(startHeight, stopHeight)
+	return c.SendCmd(cmd)
+}
+
+// RescanBlockchain rescans the local blockchain for wallet related
+// transactions from the startHeight to the the inclusive stopHeight.
+func (c *Client) RescanBlockchain(startHeight *int32, stopHeight *int32) (*btcjson.RescanBlockchainResult, error) {
+	return c.RescanBlockchainAsync(startHeight, stopHeight).Receive()
+}
+
 // ************************
 // Wallet Locking Functions
 // ************************

rpcserver.go

@@ -21,6 +21,7 @@ import (
 	"net"
 	"net/http"
 	"os"
+	"sort"
 	"strconv"
 	"strings"
 	"sync"
@@ -134,6 +135,7 @@ type commandHandler func(*rpcServer, interface{}, <-chan struct{}) (interface{},
 var rpcHandlers map[string]commandHandler
 var rpcHandlersBeforeInit = map[string]commandHandler{
 	"addnode":                handleAddNode,
+	"clearbanned":            handleClearBanned,
 	"createrawtransaction":   handleCreateRawTransaction,
 	"debuglevel":             handleDebugLevel,
 	"decoderawtransaction":   handleDecodeRawTransaction,
@@ -150,10 +152,11 @@ var rpcHandlersBeforeInit = map[string]commandHandler{
 	"getblockcount":          handleGetBlockCount,
 	"getblockhash":           handleGetBlockHash,
 	"getblockheader":         handleGetBlockHeader,
-	"getchaintips":           handleGetChainTips,
+	"getblockstats":          handleGetBlockStats,
 	"getblocktemplate":       handleGetBlockTemplate,
 	"getcfilter":             handleGetCFilter,
 	"getcfilterheader":       handleGetCFilterHeader,
+	"getchaintips":           handleGetChainTips,
 	"getconnectioncount":     handleGetConnectionCount,
 	"getcurrentnet":          handleGetCurrentNet,
 	"getdifficulty":          handleGetDifficulty,
@@ -161,8 +164,8 @@ var rpcHandlersBeforeInit = map[string]commandHandler{
 	"gethashespersec":        handleGetHashesPerSec,
 	"getheaders":             handleGetHeaders,
 	"getinfo":                handleGetInfo,
-	"getmempoolinfo":         handleGetMempoolInfo,
 	"getmempoolentry":        handleGetMempoolEntry,
+	"getmempoolinfo":         handleGetMempoolInfo,
 	"getmininginfo":          handleGetMiningInfo,
 	"getnettotals":           handleGetNetTotals,
 	"getnetworkhashps":       handleGetNetworkHashPS,
@@ -174,11 +177,13 @@ var rpcHandlersBeforeInit = map[string]commandHandler{
 	"gettxout":               handleGetTxOut,
 	"help":                   handleHelp,
 	"invalidateblock":        handleInvalidateBlock,
+	"listbanned":             handleListBanned,
 	"node":                   handleNode,
 	"ping":                   handlePing,
 	"reconsiderblock":        handleReconsiderBlock,
 	"searchrawtransactions":  handleSearchRawTransactions,
 	"sendrawtransaction":     handleSendRawTransaction,
+	"setban":                 handleSetBan,
 	"setgenerate":            handleSetGenerate,
 	"signmessagewithprivkey": handleSignMessageWithPrivKey,
 	"stop":                   handleStop,
@@ -225,11 +230,10 @@ var rpcAskWallet = map[string]struct{}{
 	"listtransactions":       {},
 	"listunspent":            {},
 	"lockunspent":            {},
-	"move":                   {},
+	"rescanblockchain":       {},
 	"sendfrom":               {},
 	"sendmany":               {},
 	"sendtoaddress":          {},
-	"setaccount":             {},
 	"settxfee":               {},
 	"signmessage":            {},
 	"signrawtransaction":     {},
@@ -325,6 +329,15 @@ func rpcDecodeHexError(gotHex string) *btcjson.RPCError {
 			gotHex))
 }
 
+// rpcInvalidAddressOrKey is a convenience function for returning a nicely
+// formatted RPC error which indicates the address or key is invalid.
+func rpcInvalidAddressOrKeyError(addr string, msg string) *btcjson.RPCError {
+	return &btcjson.RPCError{
+		Code:    btcjson.ErrRPCInvalidAddressOrKey,
+		Message: msg,
+	}
+}
+
 // rpcNoTxInfoError is a convenience function for returning a nicely formatted
 // RPC error which indicates there is no information available for the provided
 // transaction hash.
@@ -400,6 +413,21 @@ func handleAddNode(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (in
 	return nil, nil
 }
 
+// handleClearBanned handles clearbanned commands.
+func handleClearBanned(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (interface{}, error) {
+
+	err := s.cfg.ConnMgr.ClearBanned()
+	if err != nil {
+		return nil, &btcjson.RPCError{
+			Code:    btcjson.ErrRPCInvalidParameter,
+			Message: err.Error(),
+		}
+	}
+
+	// no data returned unless an error.
+	return nil, nil
+}
+
 // handleNode handles node commands.
 func handleNode(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (interface{}, error) {
 	c := cmd.(*btcjson.NodeCmd)
@@ -551,59 +579,92 @@ func handleCreateRawTransaction(s *rpcServer, cmd interface{}, closeChan <-chan
 	// Add all transaction outputs to the transaction after performing
 	// some validity checks.
 	params := s.cfg.ChainParams
-	for encodedAddr, amount := range c.Amounts {
-		// Ensure amount is in the valid range for monetary amounts.
-		if amount <= 0 || amount*btcutil.SatoshiPerBitcoin > btcutil.MaxSatoshi {
+
+	// Ensure amount is in the valid range for monetary amounts.
+	// Decode the provided address.
+	// Ensure the address is one of the supported types and that
+	// the network encoded with the address matches the network the
+	// server is currently on.
+	// Create a new script which pays to the provided address.
+	// Convert the amount to satoshi.
+	handleAmountFn := func(amount float64, encodedAddr string) (*wire.TxOut,
+		error) {
+
+		if amount <= 0 ||
+			amount*btcutil.SatoshiPerBitcoin > btcutil.MaxSatoshi {
 			return nil, &btcjson.RPCError{
 				Code:    btcjson.ErrRPCType,
-				Message: "Invalid amount",
+				Message: "invalid amount",
 			}
 		}
 
-		// Decode the provided address.
 		addr, err := btcutil.DecodeAddress(encodedAddr, params)
 		if err != nil {
-			return nil, &btcjson.RPCError{
-				Code:    btcjson.ErrRPCInvalidAddressOrKey,
-				Message: "Invalid address or key: " + err.Error(),
-			}
+			return nil, rpcInvalidAddressOrKeyError(encodedAddr,
+				"invalid address or key")
 		}
 
-		// Ensure the address is one of the supported types and that
-		// the network encoded with the address matches the network the
-		// server is currently on.
 		switch addr.(type) {
 		case *btcutil.AddressPubKeyHash:
 		case *btcutil.AddressScriptHash:
 		default:
-			return nil, &btcjson.RPCError{
-				Code:    btcjson.ErrRPCInvalidAddressOrKey,
-				Message: "Invalid address or key: " + addr.String(),
-			}
+			return nil, rpcInvalidAddressOrKeyError(addr.String(),
+				"invalid address or key")
 		}
 		if !addr.IsForNet(params) {
-			return nil, &btcjson.RPCError{
-				Code: btcjson.ErrRPCInvalidAddressOrKey,
-				Message: "Invalid address: " + encodedAddr +
-					" is for the wrong network",
-			}
+			return nil, rpcInvalidAddressOrKeyError(addr.String(),
+				"wrong network")
 		}
 
-		// Create a new script which pays to the provided address.
 		pkScript, err := txscript.PayToAddrScript(addr)
 		if err != nil {
-			context := "Failed to generate pay-to-address script"
+			context := "failed to generate pay-to-address script"
 			return nil, internalRPCError(err.Error(), context)
 		}
 
-		// Convert the amount to satoshi.
 		satoshi, err := btcutil.NewAmount(amount)
 		if err != nil {
-			context := "Failed to convert amount"
+			context := "failed to convert amount"
 			return nil, internalRPCError(err.Error(), context)
 		}
 
-		txOut := wire.NewTxOut(int64(satoshi), pkScript)
+		return wire.NewTxOut(int64(satoshi), pkScript), nil
+	}
+
+	handleDataFn := func(key string, value string) (*wire.TxOut, error) {
+		if key != "data" {
+			context := "output key must be an address or \"data\""
+			return nil, &btcjson.RPCError{
+				Code:    btcjson.ErrRPCInvalidParameter,
+				Message: context,
+			}
+		}
+		var data []byte
+		data, err := hex.DecodeString(value)
+		if err != nil {
+			return nil, rpcDecodeHexError(value)
+		}
+		return wire.NewTxOut(0, data), nil
+	}
+
+	for key, value := range c.Outputs {
+		var err error
+		var txOut *wire.TxOut
+		switch value := value.(type) {
+		case float64:
+			txOut, err = handleAmountFn(value, key)
+		case string:
+			txOut, err = handleDataFn(key, value)
+		default:
+			context := "output value must be a string or float"
+			return nil, &btcjson.RPCError{
+				Code:    btcjson.ErrRPCType,
+				Message: context,
+			}
+		}
+		if err != nil {
+			return nil, err
+		}
 		mtx.AddTxOut(txOut)
 	}
 
@@ -1194,7 +1255,7 @@ func handleGetBlock(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (i
 	if err != nil {
 		return nil, &btcjson.RPCError{
 			Code:    btcjson.ErrRPCBlockNotFound,
-			Message: "Block not found",
+			Message: "Block not found: " + err.Error(),
 		}
 	}
 	// If verbosity is 0, return the serialized block as a hex encoded string.
@@ -1211,31 +1272,23 @@ func handleGetBlock(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (i
 		return nil, internalRPCError(err.Error(), context)
 	}
 
-	// Get the block height from chain.
-	blockHeight, err := s.cfg.Chain.BlockHeightByHash(hash)
-	if err != nil {
-		context := "Failed to obtain block height"
-		return nil, internalRPCError(err.Error(), context)
-	}
-	blk.SetHeight(blockHeight)
-	best := s.cfg.Chain.BestSnapshot()
-
-	// Get next block hash unless there are none.
-	var nextHashString string
-	if blockHeight < best.Height {
-		nextHash, err := s.cfg.Chain.BlockHashByHeight(blockHeight + 1)
-		if err != nil {
-			context := "No next block"
-			return nil, internalRPCError(err.Error(), context)
-		}
-		nextHashString = nextHash.String()
-	}
-
 	params := s.cfg.ChainParams
 	blockHeader := &blk.MsgBlock().Header
+
+	// Get further details (height, confirmations, nexthash, mediantime, etc.) from chain.
+	attrs, best, err := s.cfg.Chain.BlockAttributesByHash(hash, &blockHeader.PrevBlock)
+	if err != nil {
+		context := "Failed to obtain block details"
+		return nil, internalRPCError(err.Error(), context)
+	}
+
 	var prevHashString string
-	if blockHeight > 0 {
-		prevHashString = blockHeader.PrevBlock.String()
+	if attrs.PrevHash != nil {
+		prevHashString = attrs.PrevHash.String()
+	}
+	var nextHashString string
+	if attrs.NextHash != nil {
+		nextHashString = attrs.NextHash.String()
 	}
 
 	base := btcjson.GetBlockVerboseResultBase{
@@ -1246,13 +1299,15 @@ func handleGetBlock(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (i
 		PreviousHash:  prevHashString,
 		Nonce:         blockHeader.Nonce,
 		Time:          blockHeader.Timestamp.Unix(),
-		Confirmations: int64(1 + best.Height - blockHeight),
-		Height:        int64(blockHeight),
+		MedianTime:    attrs.MedianTime.Unix(),
+		Confirmations: int64(attrs.Confirmations),
+		Height:        int64(attrs.Height),
 		Size:          int32(len(blkBytes)),
 		StrippedSize:  int32(blk.MsgBlock().SerializeSizeStripped()),
 		Weight:        int32(blockchain.GetBlockWeight(blk)),
 		Bits:          strconv.FormatInt(int64(blockHeader.Bits), 16),
 		Difficulty:    getDifficultyRatio(blockHeader.Bits, params),
+		ChainWork:     attrs.ChainWork.Text(16),
 		NextHash:      nextHashString,
 		ClaimTrie:     blockHeader.ClaimTrie.String(),
 	}
@@ -1277,7 +1332,7 @@ func handleGetBlock(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (i
 	for i, tx := range txns {
 		rawTxn, err := createTxRawResult(params, tx.MsgTx(),
 			tx.Hash().String(), blockHeader, hash.String(),
-			blockHeight, best.Height)
+			attrs.Height, best.Height)
 		if err != nil {
 			return nil, err
 		}
@@ -1525,6 +1580,405 @@ func handleGetChainTips(s *rpcServer, cmd interface{}, closeChan <-chan struct{}
 	return results, nil
 }
 
+// handleGetBlockStats implements the getblockstats command.
+func handleGetBlockStats(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (interface{}, error) {
+	c := cmd.(*btcjson.GetBlockStatsCmd)
+
+	// Check whether a block height or hash was provided.
+	blockHeight, ok := c.HashOrHeight.Value.(int)
+	var hash *chainhash.Hash
+	var err error
+	if ok {
+		// Block height was provided.
+		hash, err = s.cfg.Chain.BlockHashByHeight(int32(blockHeight))
+		if err != nil {
+			return nil, &btcjson.RPCError{
+				Code:    btcjson.ErrRPCOutOfRange,
+				Message: "Block number out of range",
+			}
+		}
+	} else {
+		// Block hash was provided.
+		hashString := c.HashOrHeight.Value.(string)
+		hash, err = chainhash.NewHashFromStr(hashString)
+		if err != nil {
+			return nil, rpcDecodeHexError(hashString)
+		}
+
+		// Get the block height from chain.
+		blockHeightByHash, err := s.cfg.Chain.BlockHeightByHash(hash)
+		if err != nil {
+			context := "Failed to obtain block height"
+			return nil, internalRPCError(err.Error(), context)
+		}
+		blockHeight = int(blockHeightByHash)
+	}
+
+	// Load block bytes from the database.
+	var blkBytes []byte
+	err = s.cfg.DB.View(func(dbTx database.Tx) error {
+		var err error
+		blkBytes, err = dbTx.FetchBlock(hash)
+		return err
+	})
+	if err != nil {
+		return nil, &btcjson.RPCError{
+			Code:    btcjson.ErrRPCBlockNotFound,
+			Message: "Block not found",
+		}
+	}
+
+	// Deserialize the block.
+	blk, err := btcutil.NewBlockFromBytes(blkBytes)
+	if err != nil {
+		context := "Failed to deserialize block"
+		return nil, internalRPCError(err.Error(), context)
+	}
+
+	var selectedStats []string
+	if c.Stats != nil {
+		selectedStats = *c.Stats
+	}
+
+	// Create a set of selected stats to facilitate queries.
+	statsSet := make(map[string]bool)
+	for _, value := range selectedStats {
+		statsSet[value] = true
+	}
+
+	// Return all stats if an empty array was provided.
+	allStats := len(selectedStats) == 0
+	calcFees := statsSet["avgfee"] || statsSet["avgfeerate"] || statsSet["maxfee"] || statsSet["maxfeerate"] ||
+		statsSet["medianfee"] || statsSet["totalfee"] || statsSet["feerate_percentiles"]
+
+	if calcFees && s.cfg.TxIndex == nil {
+		return nil, &btcjson.RPCError{
+			Code: btcjson.ErrRPCNoTxInfo,
+			Message: "The transaction index must be " +
+				"enabled to obtain fee statistics " +
+				"(specify --txindex)",
+		}
+	}
+
+	txs := blk.Transactions()
+	txCount := len(txs)
+	var inputCount, outputCount int
+	var totalOutputValue int64
+
+	// Create a map of transaction statistics.
+	txStats := make([]map[string]interface{}, txCount)
+	for i, tx := range txs {
+		size := tx.MsgTx().SerializeSize()
+		witnessSize := size - tx.MsgTx().SerializeSizeStripped()
+		weight := int64(tx.MsgTx().SerializeSizeStripped()*4 + witnessSize)
+
+		var fee, feeRate int64
+		if (calcFees || allStats) && s.cfg.TxIndex != nil && !blockchain.IsCoinBaseTx(tx.MsgTx()) {
+			fee, err = calculateFee(tx, s.cfg.TxIndex, s.cfg.DB)
+			if err != nil {
+				context := "Failed to calculate fees"
+				return nil, internalRPCError(err.Error(), context)
+			}
+			if weight != 0 {
+				feeRate = fee * 4 / weight
+			}
+		}
+		segwit := tx.HasWitness()
+		txStats[i] = map[string]interface{}{"tx": tx, "fee": fee, "size": int64(size),
+			"feeRate": feeRate, "weight": weight, "segwit": segwit}
+		inputCount += len(tx.MsgTx().TxIn)
+		outputCount += len(tx.MsgTx().TxOut)
+
+		// Coinbase is excluded from the total output.
+		if !blockchain.IsCoinBase(tx) {
+			for _, txOut := range tx.MsgTx().TxOut {
+				totalOutputValue += txOut.Value
+			}
+		}
+	}
+
+	var totalFees, minFee, maxFee, minFeeRate, maxFeeRate, segwitCount,
+		segwitWeight, totalWeight, totalSize, minSize, maxSize, segwitSize int64
+	if txCount > 1 {
+		minFee = txStats[1]["fee"].(int64)
+		minFeeRate = txStats[1]["feeRate"].(int64)
+	}
+	for i := 0; i < len(txStats); i++ {
+		var fee, feeRate int64
+		tx := txStats[i]["tx"].(*btcutil.Tx)
+		if !blockchain.IsCoinBaseTx(tx.MsgTx()) {
+			// Fee statistics.
+			fee = txStats[i]["fee"].(int64)
+			feeRate = txStats[i]["feeRate"].(int64)
+			if minFee > fee {
+				minFee = fee
+			}
+			if maxFee < fee {
+				maxFee = fee
+			}
+			if minFeeRate > feeRate {
+				minFeeRate = feeRate
+			}
+			if maxFeeRate < feeRate {
+				maxFeeRate = feeRate
+			}
+			totalFees += txStats[i]["fee"].(int64)
+
+			// Segwit statistics.
+			if txStats[i]["segwit"].(bool) {
+				segwitCount++
+				segwitSize += txStats[i]["size"].(int64)
+				segwitWeight += txStats[i]["weight"].(int64)
+			}
+
+			// Size statistics.
+			size := txStats[i]["size"].(int64)
+			if minSize == 0 {
+				minSize = size
+			}
+			if maxSize < size {
+				maxSize = size
+			} else if minSize > size {
+				minSize = size
+			}
+			totalSize += txStats[i]["size"].(int64)
+
+			totalWeight += txStats[i]["weight"].(int64)
+		}
+	}
+
+	var avgFee, avgFeeRate, avgSize int64
+	if txCount > 1 {
+		avgFee = totalFees / int64(txCount-1)
+	}
+	if totalWeight != 0 {
+		avgFeeRate = totalFees * 4 / totalWeight
+	}
+	if txCount > 1 {
+		avgSize = totalSize / int64(txCount-1)
+	}
+
+	subsidy := blockchain.CalcBlockSubsidy(int32(blockHeight), s.cfg.ChainParams)
+
+	medianStat := func(stat string) int64 {
+		size := len(txStats) - 1
+		if size == 0 {
+			return 0
+		}
+		statArray := make([]int64, size)
+		// Start with the second element to ignore entry associated with coinbase.
+		for i, stats := range txStats[1:] {
+			statArray[i] = stats[stat].(int64)
+		}
+		sort.Slice(statArray, func(i, j int) bool {
+			return statArray[i] < statArray[j]
+		})
+		if size%2 == 0 {
+			return (statArray[size/2-1] + statArray[size/2]) / 2
+		}
+		return statArray[size/2]
+	}
+
+	var medianFee int64
+	if totalFees > 0 {
+		medianFee = medianStat("fee")
+	} else {
+		medianFee = 0
+	}
+	medianSize := medianStat("size")
+
+	// Calculate feerate percentiles.
+	var feeratePercentiles []int64
+	if allStats || calcFees {
+
+		// Sort by feerate.
+		sort.Slice(txStats, func(i, j int) bool {
+			return txStats[i]["feeRate"].(int64) < txStats[j]["feeRate"].(int64)
+		})
+		totalWeight := float64(totalWeight)
+
+		// Find 10th, 25th, 50th, 75th and 90th percentile weight units.
+		weights := []float64{
+			totalWeight / 10, totalWeight / 4, totalWeight / 2,
+			(totalWeight * 3) / 4, (totalWeight * 9) / 10}
+		var cumulativeWeight int64
+		feeratePercentiles = make([]int64, len(weights))
+		nextPercentileIndex := 0
+		for i := 0; i < len(txStats); i++ {
+			cumulativeWeight += txStats[i]["weight"].(int64)
+			for nextPercentileIndex < len(weights) && float64(cumulativeWeight) >= weights[nextPercentileIndex] {
+				feeratePercentiles[nextPercentileIndex] = txStats[i]["feeRate"].(int64)
+				nextPercentileIndex++
+			}
+		}
+
+		// Fill any remaining percentiles with the last value.
+		for i := nextPercentileIndex; i < len(weights); i++ {
+			feeratePercentiles[i] = txStats[len(txStats)-1]["feeRate"].(int64)
+		}
+	}
+
+	var blockHash string
+	if allStats || statsSet["blockhash"] {
+		blockHash = blk.Hash().String()
+	}
+
+	medianTime, err := medianBlockTime(blk.Hash(), s.cfg.Chain)
+	if err != nil {
+		context := "Failed to obtain block median time"
+		return nil, internalRPCError(err.Error(), context)
+	}
+
+	resultMap := map[string]int64{
+		"avgfee":         avgFee,
+		"avgfeerate":     avgFeeRate,
+		"avgtxsize":      avgSize,
+		"height":         int64(blockHeight),
+		"ins":            int64(inputCount - 1), // Coinbase input is not included.
+		"maxfee":         maxFee,
+		"maxfeerate":     maxFeeRate,
+		"maxtxsize":      maxSize,
+		"medianfee":      medianFee,
+		"mediantime":     medianTime.Unix(),
+		"mediantxsize":   medianSize,
+		"minfee":         minFee,
+		"minfeerate":     minFeeRate,
+		"mintxsize":      minSize,
+		"outs":           int64(outputCount),
+		"swtotal_size":   segwitSize,
+		"swtotal_weight": segwitWeight,
+		"swtxs":          segwitCount,
+		"subsidy":        subsidy,
+		"time":           blk.MsgBlock().Header.Timestamp.Unix(),
+		"total_out":      totalOutputValue,
+		"total_size":     totalSize,
+		"total_weight":   totalWeight,
+		"totalfee":       totalFees,
+		"txs":            int64(len(txs)),
+		"utxo_increase":  int64(outputCount - (inputCount - 1)),
+	}
+
+	// This function determines whether a statistic goes into the
+	// final result, except for blockhash and feerate_percentiles
+	// which are handled separately.
+	resultFilter := func(stat string) *int64 {
+		if allStats && s.cfg.TxIndex == nil {
+			// There are no fee statistics to send.
+			excludedStats := []string{"avgfee", "avgfeerate", "maxfee", "maxfeerate", "medianfee", "minfee", "minfeerate"}
+			for _, excluded := range excludedStats {
+				if stat == excluded {
+					return nil
+				}
+			}
+		}
+		if allStats || statsSet[stat] {
+			if value, ok := resultMap[stat]; ok {
+				return &value
+			}
+		}
+		return nil
+	}
+
+	result := &btcjson.GetBlockStatsResult{
+		AverageFee:         resultFilter("avgfee"),
+		AverageFeeRate:     resultFilter("avgfeerate"),
+		AverageTxSize:      resultFilter("avgtxsize"),
+		FeeratePercentiles: &feeratePercentiles,
+		Hash:               &blockHash,
+		Height:             resultFilter("height"),
+		Ins:                resultFilter("ins"),
+		MaxFee:             resultFilter("maxfee"),
+		MaxFeeRate:         resultFilter("maxfeerate"),
+		MaxTxSize:          resultFilter("maxtxsize"),
+		MedianFee:          resultFilter("medianfee"),
+		MedianTime:         resultFilter("mediantime"),
+		MedianTxSize:       resultFilter("mediantxsize"),
+		MinFee:             resultFilter("minfee"),
+		MinFeeRate:         resultFilter("minfeerate"),
+		MinTxSize:          resultFilter("mintxsize"),
+		Outs:               resultFilter("outs"),
+		SegWitTotalSize:    resultFilter("swtotal_size"),
+		SegWitTotalWeight:  resultFilter("swtotal_weight"),
+		SegWitTxs:          resultFilter("swtxs"),
+		Subsidy:            resultFilter("subsidy"),
+		Time:               resultFilter("time"),
+		TotalOut:           resultFilter("total_out"),
+		TotalSize:          resultFilter("total_size"),
+		TotalWeight:        resultFilter("total_weight"),
+		TotalFee:           resultFilter("totalfee"),
+		Txs:                resultFilter("txs"),
+		UTXOIncrease:       resultFilter("utxo_increase"),
+		UTXOSizeIncrease:   resultFilter("utxo_size_inc"),
+	}
+	return result, nil
+}
+
+// calculateFee returns the fee of a transaction.
+func calculateFee(tx *btcutil.Tx, txIndex *indexers.TxIndex, db database.DB) (int64, error) {
+	var inValue, outValue int64
+	for _, input := range tx.MsgTx().TxIn {
+		prevTxHash := input.PreviousOutPoint.Hash
+		// Look up the location of the previous transaction in the index.
+		blockRegion, err := txIndex.TxBlockRegion(&prevTxHash)
+		if err != nil {
+			context := "Failed to retrieve transaction location"
+			return 0, internalRPCError(err.Error(), context)
+		}
+		if blockRegion == nil {
+			return 0, rpcNoTxInfoError(&prevTxHash)
+		}
+
+		// Load the raw transaction bytes from the database.
+		var txBytes []byte
+		err = db.View(func(dbTx database.Tx) error {
+			var err error
+			txBytes, err = dbTx.FetchBlockRegion(blockRegion)
+			return err
+		})
+		if err != nil {
+			return 0, rpcNoTxInfoError(&prevTxHash)
+		}
+
+		var msgTx wire.MsgTx
+		err = msgTx.Deserialize(bytes.NewReader(txBytes))
+		if err != nil {
+			context := "Failed to deserialize transaction"
+			return 0, internalRPCError(err.Error(), context)
+		}
+		prevOutValue := msgTx.TxOut[input.PreviousOutPoint.Index].Value
+		inValue += prevOutValue
+	}
+	for _, output := range tx.MsgTx().TxOut {
+		outValue += output.Value
+	}
+	fee := inValue - outValue
+	return fee, nil
+}
+
+// medianBlockTime returns the median time of a block and its 10 previous blocks
+// as per BIP113.
+func medianBlockTime(blockHash *chainhash.Hash, chain *blockchain.BlockChain) (*time.Time, error) {
+	blockTimes := make([]time.Time, 0)
+	currentHash := blockHash
+	for i := 0; i < 11; i++ {
+		header, err := chain.HeaderByHash(currentHash)
+		if err != nil {
+			return nil, err
+		}
+		blockTimes = append(blockTimes, header.Timestamp)
+		genesisPrevBlock, _ := chainhash.NewHashFromStr("0000000000000000000000000000000000000000000000000000000000000000")
+		if header.PrevBlock.IsEqual(genesisPrevBlock) {
+			// This is the genesis block so there's no need to iterate further.
+			break
+		}
+		currentHash = &header.PrevBlock
+	}
+	sort.Slice(blockTimes, func(i, j int) bool {
+		return blockTimes[i].Before(blockTimes[j])
+	})
+	return &blockTimes[len(blockTimes)/2], nil
+}
+
 // encodeTemplateID encodes the passed details into an ID that can be used to
 // uniquely identify a block template.
 func encodeTemplateID(prevHash *chainhash.Hash, lastGenerated time.Time) string {
@@ -1908,11 +2362,12 @@ func (state *gbtWorkState) blockTemplateResult(useCoinbaseValue bool, submitOld
 	if template.WitnessCommitment != nil {
 		reply.DefaultWitnessCommitment = hex.EncodeToString(template.WitnessCommitment)
 		reply.Rules = append(reply.Rules, "!segwit")
+	} else {
+		reply.Rules = append(reply.Rules, "segwit")
 	}
 
 	if useCoinbaseValue {
 		reply.CoinbaseAux = gbtCoinbaseAux
-		reply.CoinbaseValue = &msgBlock.Transactions[0].TxOut[0].Value
 	} else {
 		// Ensure the template has a valid payment address associated
 		// with it when a full coinbase is requested.
@@ -1945,6 +2400,9 @@ func (state *gbtWorkState) blockTemplateResult(useCoinbaseValue bool, submitOld
 		reply.CoinbaseTxn = &resultTx
 	}
 
+	// Return coinbasevalue anyway as lbrycrd and bitcoind do.
+	reply.CoinbaseValue = &msgBlock.Transactions[0].TxOut[0].Value
+
 	return &reply, nil
 }
 
@@ -2468,19 +2926,7 @@ func handleGetInfo(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (in
 
 // handleGetMempoolInfo implements the getmempoolinfo command.
 func handleGetMempoolInfo(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (interface{}, error) {
-	mempoolTxns := s.cfg.TxMemPool.TxDescs()
-
-	var numBytes int64
-	for _, txD := range mempoolTxns {
-		numBytes += int64(txD.Tx.MsgTx().SerializeSize())
-	}
-
-	ret := &btcjson.GetMempoolInfoResult{
-		Size:  int64(len(mempoolTxns)),
-		Bytes: numBytes,
-	}
-
-	return ret, nil
+	return s.cfg.TxMemPool.MempoolInfo(), nil
 }
 
 // handleGetMempoolEntry implements the getmempoolentry command.
@@ -3164,6 +3610,24 @@ func handleHelp(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (inter
 	return help, nil
 }
 
+// handleListBanned handles the listbanned command.
+func handleListBanned(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (interface{}, error) {
+	banned := s.cfg.ConnMgr.BannedPeers()
+	reply := make([]*btcjson.ListBannedResult, 0, len(banned))
+	for address, period := range banned {
+		since, until := period.since, period.until
+		r := btcjson.ListBannedResult{
+			Address:       address,
+			BanCreated:    since.Unix(),
+			BannedUntil:   until.Unix(),
+			BanDuration:   int64(until.Sub(since).Seconds()),
+			TimeRemaining: int64(time.Until(until).Seconds()),
+		}
+		reply = append(reply, &r)
+	}
+	return reply, nil
+}
+
 // handlePing implements the ping command.
 func handlePing(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (interface{}, error) {
 	// Ask server to ping \o_
@@ -3760,12 +4224,66 @@ func handleSendRawTransaction(s *rpcServer, cmd interface{}, closeChan <-chan st
 	// Keep track of all the sendrawtransaction request txns so that they
 	// can be rebroadcast if they don't make their way into a block.
 	txD := acceptedTxs[0]
+	s.cfg.TxMemPool.AddUnbroadcastTx(txD.Tx.Hash())
 	iv := wire.NewInvVect(wire.InvTypeTx, txD.Tx.Hash())
 	s.cfg.ConnMgr.AddRebroadcastInventory(iv, txD)
 
 	return tx.Hash().String(), nil
 }
 
+// handleSetBan handles the setban command.
+func handleSetBan(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (interface{}, error) {
+	c := cmd.(*btcjson.SetBanCmd)
+
+	addr := net.ParseIP(c.Addr)
+	if addr == nil {
+		return nil, &btcjson.RPCError{
+			Code:    btcjson.ErrRPCInvalidParameter,
+			Message: "invalid addr for setban",
+		}
+	}
+
+	since := time.Now()
+	until := since.Add(time.Second * time.Duration(*c.BanTime))
+	if *c.BanTime == 0 {
+		until = since.Add(defaultBanDuration)
+	}
+	if *c.Absolute {
+		until = time.Unix(int64(*c.BanTime), 0)
+	}
+
+	var err error
+	switch c.SubCmd {
+	case "add":
+		err = s.cfg.ConnMgr.SetBan(addr.String(), since, until)
+		addr := addr.String()
+		peers := s.cfg.ConnMgr.ConnectedPeers()
+		for _, peer := range peers {
+			p := peer.ToPeer()
+			if p.NA().IP.String() == addr {
+				p.Disconnect()
+			}
+		}
+	case "remove":
+		err = s.cfg.ConnMgr.RemoveBan(addr.String())
+	default:
+		return nil, &btcjson.RPCError{
+			Code:    btcjson.ErrRPCInvalidParameter,
+			Message: "invalid subcommand for setban",
+		}
+	}
+
+	if err != nil {
+		return nil, &btcjson.RPCError{
+			Code:    btcjson.ErrRPCInvalidParameter,
+			Message: err.Error(),
+		}
+	}
+
+	// no data returned unless an error.
+	return nil, nil
+}
+
 // handleSetGenerate implements the setgenerate command.
 func handleSetGenerate(s *rpcServer, cmd interface{}, closeChan <-chan struct{}) (interface{}, error) {
 	c := cmd.(*btcjson.SetGenerateCmd)
@@ -4823,6 +5341,18 @@ type rpcserverConnManager interface {
 	// ConnectedPeers returns an array consisting of all connected peers.
 	ConnectedPeers() []rpcserverPeer
 
+	// BannedPeers returns an array consisting of all Banned peers.
+	BannedPeers() map[string]bannedPeriod
+
+	// SetBan add the addr to the ban list.
+	SetBan(addr string, since time.Time, until time.Time) error
+
+	// RemoveBan remove the subnet from the ban list.
+	RemoveBan(subnet string) error
+
+	// ClearBanned removes all banned IPs.
+	ClearBanned() error
+
 	// PersistentPeers returns an array consisting of all the persistent
 	// peers.
 	PersistentPeers() []rpcserverPeer

rpcserverhelp.go

@@ -49,13 +49,16 @@ var helpDescsEnUS = map[string]string{
 		"The transaction inputs are not signed in the created transaction.\n" +
 		"The signrawtransaction RPC command provided by wallet must be used to sign the resulting transaction.",
 	"createrawtransaction-inputs":         "The inputs to the transaction",
-	"createrawtransaction-amounts":        "JSON object with the destination addresses as keys and amounts as values",
-	"createrawtransaction-amounts--key":   "address",
-	"createrawtransaction-amounts--value": "n.nnn",
-	"createrawtransaction-amounts--desc":  "The destination address as the key and the amount in LBC as the value",
+	"createrawtransaction-outputs":        "JSON object with the destination addresses as keys and amounts as values",
+	"createrawtransaction-outputs--key":   "address or \"data\"",
+	"createrawtransaction-outputs--value": "value in BTC as floating point number or hex-encoded data for \"data\"",
+	"createrawtransaction-outputs--desc":  "The destination address as the key and the amount in LBC as the value",
 	"createrawtransaction-locktime":       "Locktime value; a non-zero value will also locktime-activate the inputs",
 	"createrawtransaction--result0":       "Hex-encoded bytes of the serialized transaction",
 
+	// ClearBannedCmd help.
+	"clearbanned--synopsis": "Clear all banned IPs.",
+
 	// ScriptSig help.
 	"scriptsig-asm": "Disassembly of the script",
 	"scriptsig-hex": "Hex-encoded bytes of the script",
@@ -197,6 +200,43 @@ var helpDescsEnUS = map[string]string{
 	"getblockchaininforesult-softforks":            "The status of the super-majority soft-forks",
 	"getblockchaininforesult-unifiedsoftforks":     "The status of the super-majority soft-forks used by bitcoind on or after v0.19.0",
 
+	// GetBlockStatsCmd help.
+	"getblockstats--synopsis":    "Returns statistics about a block given its hash or height. --txindex must be enabled for fee and feerate statistics.",
+	"getblockstats-hashorheight": "The hash or height of the block",
+	"hashorheight-value":         "The hash or height of the block",
+	"getblockstats-stats":        "Selected statistics",
+
+	// GetBlockStatsResult help.
+	"getblockstatsresult-avgfee":              "The average fee in the block",
+	"getblockstatsresult-avgfeerate":          "The average feerate in the block (in satoshis per virtual byte)",
+	"getblockstatsresult-avgtxsize":           "The average transaction size in the block",
+	"getblockstatsresult-blockhash":           "The block hash",
+	"getblockstatsresult-feerate_percentiles": "Feerates at the 10th, 25th, 50th, 75th, and 90th percentile weight unit (in satoshis per virtual byte)",
+	"getblockstatsresult-height":              "The block height",
+	"getblockstatsresult-ins":                 "The number of inputs (excluding coinbase)",
+	"getblockstatsresult-maxfee":              "Maxium fee in the block",
+	"getblockstatsresult-maxfeerate":          "Maximum feerate in the block (in satoshis per virtual byte)",
+	"getblockstatsresult-maxtxsize":           "Maximum transaction size",
+	"getblockstatsresult-medianfee":           "Truncated median fee",
+	"getblockstatsresult-mediantime":          "The median time from the block and its previous 10 blocks (BIP113)",
+	"getblockstatsresult-mediantxsize":        "Truncated median transaction size",
+	"getblockstatsresult-minfee":              "Minimum fee in the block",
+	"getblockstatsresult-minfeerate":          "Minimum feerate in the block (in satoshis per virtual byte)",
+	"getblockstatsresult-mintxsize":           "Minimum transaction size",
+	"getblockstatsresult-outs":                "The number of outputs",
+	"getblockstatsresult-subsidy":             "The block subsidy",
+	"getblockstatsresult-swtotal_size":        "Total size of all segwit transactions in the block (excluding coinbase)",
+	"getblockstatsresult-swtotal_weight":      "Total weight of all segwit transactions in the block (excluding coinbase)",
+	"getblockstatsresult-swtxs":               "The number of segwit transactions in the block (excluding coinbase)",
+	"getblockstatsresult-time":                "The block time",
+	"getblockstatsresult-total_out":           "Total amount in all outputs (excluding coinbase)",
+	"getblockstatsresult-total_size":          "Total size of all transactions (excluding coinbase)",
+	"getblockstatsresult-total_weight":        "Total weight of all transactions (excluding coinbase)",
+	"getblockstatsresult-totalfee":            "The total of fees",
+	"getblockstatsresult-txs":                 "The number of transactions (excluding coinbase)",
+	"getblockstatsresult-utxo_increase":       "The increase/decrease in the number of unspent outputs",
+	"getblockstatsresult-utxo_size_inc":       "The increase/decrease in size for the utxo index",
+
 	// SoftForkDescription help.
 	"softforkdescription-reject":  "The current activation status of the softfork",
 	"softforkdescription-version": "The block version that signals enforcement of this softfork",
@@ -260,9 +300,11 @@ var helpDescsEnUS = map[string]string{
 	"getblockverboseresult-tx":                "The transaction hashes (only when verbosity=1)",
 	"getblockverboseresult-nTx":               "The number of transactions (aka, count of TX)",
 	"getblockverboseresult-time":              "The block time in seconds since 1 Jan 1970 GMT",
+	"getblockverboseresult-mediantime":        "The median block time in seconds since 1 Jan 1970 GMT",
 	"getblockverboseresult-nonce":             "The block nonce",
 	"getblockverboseresult-bits":              "The bits which represent the block difficulty",
 	"getblockverboseresult-difficulty":        "The proof-of-work difficulty as a multiple of the minimum difficulty",
+	"getblockverboseresult-chainwork":         "Expected number of hashes required to produce the chain up to this block (in hex)",
 	"getblockverboseresult-previousblockhash": "The hash of the previous block",
 	"getblockverboseresult-nextblockhash":     "The hash of the next block (only if there is one)",
 	"getblockverboseresult-strippedsize":      "The size of the block without witness data",
@@ -453,8 +495,13 @@ var helpDescsEnUS = map[string]string{
 	"getmempoolinfo--synopsis": "Returns memory pool information",
 
 	// GetMempoolInfoResult help.
-	"getmempoolinforesult-bytes": "Size in bytes of the mempool",
-	"getmempoolinforesult-size":  "Number of transactions in the mempool",
+	"getmempoolinforesult-bytes":            "Size in bytes of the mempool",
+	"getmempoolinforesult-size":             "Number of transactions in the mempool",
+	"getmempoolinforesult-usage":            "Total memory usage for the mempool",
+	"getmempoolinforesult-total_fee":        "Total fees for the mempool in LBC, ignoring modified fees through prioritizetransaction",
+	"getmempoolinforesult-mempoolminfee":    "Minimum fee rate in LBC/kvB for tx to be accepted. Is the maximum of minrelaytxfee and minimum mempool fee",
+	"getmempoolinforesult-minrelaytxfee":    "Current minimum relay fee for transactions",
+	"getmempoolinforesult-unbroadcastcount": "Current number of transactions that haven't passed initial broadcast yet",
 
 	// GetMiningInfoResult help.
 	"getmininginforesult-blocks":             "Height of the latest best block",
@@ -629,6 +676,16 @@ var helpDescsEnUS = map[string]string{
 	"ping--synopsis": "Queues a ping to be sent to each connected peer.\n" +
 		"Ping times are provided by getpeerinfo via the pingtime and pingwait fields.",
 
+	// ListBannedCmd help.
+	"listbanned--synopsis": "List all banned IPs.",
+
+	// ListBannedResult help.
+	"listbannedresult-address":        "The IP of the banned node.",
+	"listbannedresult-ban_created":    "The UNIX epoch time the ban was created.",
+	"listbannedresult-banned_until":   "The UNIX epoch time the ban expires.",
+	"listbannedresult-ban_duration":   "The duration of the ban, in seconds.",
+	"listbannedresult-time_remaining": "The time remaining on the ban, in seconds",
+
 	// ReconsiderBlockCmd
 	"reconsiderblock--synopsis": "Reconsider a block for validation.",
 	"reconsiderblock-blockhash": "Hash of the block you want to reconsider",
@@ -657,6 +714,13 @@ var helpDescsEnUS = map[string]string{
 	"sendrawtransaction--result0":     "The hash of the transaction",
 	"allowhighfeesormaxfeerate-value": "Either the boolean value for the allowhighfees parameter in bitcoind < v0.19.0 or the numerical value for the maxfeerate field in bitcoind v0.19.0 and later",
 
+	// SetBanCmd help.
+	"setban--synopsis": "Add or remove an IP from the banned list. (Currently, subnet is not supported.)",
+	"setban-addr":      "The IP to ban. (Currently, subnet is not supported.)",
+	"setban-subcmd":    "'add' to add an IP to the list, 'remove' to remove an IP from the list",
+	"setban-bantime":   "Time in seconds the IP is banned (0 or empty means using the default time of 24h which can also be overwritten by the -bantime startup argument)",
+	"setban-absolute":  "If set, the bantime must be an absolute timestamp expressed in UNIX epoch time; default to false.",
+
 	// SetGenerateCmd help.
 	"setgenerate--synopsis":    "Set the server to generate coins (mine) or not.",
 	"setgenerate-generate":     "Use true to enable generation, false to disable it",
@@ -873,6 +937,7 @@ var helpDescsEnUS = map[string]string{
 // pointer to the type (or nil to indicate no return value).
 var rpcResultTypes = map[string][]interface{}{
 	"addnode":                nil,
+	"clearbanned":            nil,
 	"createrawtransaction":   {(*string)(nil)},
 	"debuglevel":             {(*string)(nil), (*string)(nil)},
 	"decoderawtransaction":   {(*btcjson.TxRawDecodeResult)(nil)},
@@ -885,11 +950,12 @@ var rpcResultTypes = map[string][]interface{}{
 	"getbestblock":           {(*btcjson.GetBestBlockResult)(nil)},
 	"getbestblockhash":       {(*string)(nil)},
 	"getblock":               {(*string)(nil), (*btcjson.GetBlockVerboseResult)(nil)},
+	"getblockchaininfo":      {(*btcjson.GetBlockChainInfoResult)(nil)},
 	"getblockcount":          {(*int64)(nil)},
 	"getblockhash":           {(*string)(nil)},
 	"getblockheader":         {(*string)(nil), (*btcjson.GetBlockHeaderVerboseResult)(nil)},
+	"getblockstats":          {(*btcjson.GetBlockStatsResult)(nil)},
 	"getblocktemplate":       {(*btcjson.GetBlockTemplateResult)(nil), (*string)(nil), nil},
-	"getblockchaininfo":      {(*btcjson.GetBlockChainInfoResult)(nil)},
 	"getcfilter":             {(*string)(nil)},
 	"getcfilterheader":       {(*string)(nil)},
 	"getchaintips":           {(*[]btcjson.GetChainTipsResult)(nil)},
@@ -911,13 +977,15 @@ var rpcResultTypes = map[string][]interface{}{
 	"getrawmempool":          {(*[]string)(nil), (*btcjson.GetRawMempoolVerboseResult)(nil)},
 	"getrawtransaction":      {(*string)(nil), (*btcjson.TxRawResult)(nil)},
 	"gettxout":               {(*btcjson.GetTxOutResult)(nil)},
-	"node":                   nil,
 	"help":                   {(*string)(nil), (*string)(nil)},
 	"invalidateblock":        nil,
+	"listbanned":             {(*[]btcjson.ListBannedResult)(nil)},
+	"node":                   nil,
 	"ping":                   nil,
 	"reconsiderblock":        nil,
 	"searchrawtransactions":  {(*string)(nil), (*[]btcjson.SearchRawTransactionsResult)(nil)},
 	"sendrawtransaction":     {(*string)(nil)},
+	"setban":                 nil,
 	"setgenerate":            nil,
 	"signmessagewithprivkey": {(*string)(nil)},
 	"stop":                   {(*string)(nil)},

server.go

@@ -156,13 +156,18 @@ type updatePeerHeightsMsg struct {
 	originPeer *peer.Peer
 }
 
+type bannedPeriod struct {
+	since time.Time
+	until time.Time
+}
+
 // peerState maintains state of inbound, persistent, outbound peers as well
 // as banned peers and outbound groups.
 type peerState struct {
 	inboundPeers    map[int32]*serverPeer
 	outboundPeers   map[int32]*serverPeer
 	persistentPeers map[int32]*serverPeer
-	banned          map[string]time.Time
+	banned          map[string]bannedPeriod
 	outboundGroups  map[string]int
 }
 
@@ -699,6 +704,11 @@ func (sp *serverPeer) OnGetData(_ *peer.Peer, msg *wire.MsgGetData) {
 			if i == len(msg.InvList)-1 && c != nil {
 				<-c
 			}
+		} else if iv.Type == wire.InvTypeWitnessTx || iv.Type == wire.InvTypeTx {
+			// We interpret fulfilling a GETDATA for a transaction as a
+			// successful initial broadcast and remove it from our
+			// unbroadcast set.
+			sp.server.txMemPool.RemoveUnbroadcastTx(&iv.Hash)
 		}
 		numAdded++
 		waitChan = c
@@ -1651,10 +1661,10 @@ func (s *server) handleAddPeerMsg(state *peerState, sp *serverPeer) bool {
 		sp.Disconnect()
 		return false
 	}
-	if banEnd, ok := state.banned[host]; ok {
-		if time.Now().Before(banEnd) {
-			srvrLog.Debugf("Peer %s is banned for another %v - disconnecting",
-				host, time.Until(banEnd))
+	if ban, ok := state.banned[host]; ok {
+		if time.Now().Before(ban.until) {
+			srvrLog.Infof("Peer %s is banned for another %v - disconnecting",
+				host, time.Until(ban.until))
 			sp.Disconnect()
 			return false
 		}
@@ -1776,7 +1786,12 @@ func (s *server) handleBanPeerMsg(state *peerState, sp *serverPeer) {
 	direction := directionString(sp.Inbound())
 	srvrLog.Infof("Banned peer %s (%s) for %v", host, direction,
 		cfg.BanDuration)
-	state.banned[host] = time.Now().Add(cfg.BanDuration)
+
+	since := time.Now()
+	state.banned[host] = bannedPeriod{
+		since: since,
+		until: since.Add(cfg.BanDuration),
+	}
 }
 
 // handleRelayInvMsg deals with relaying inventory to peers that are not already
@@ -1871,6 +1886,25 @@ type getPeersMsg struct {
 	reply chan []*serverPeer
 }
 
+type listBannedPeersMsg struct {
+	reply chan map[string]bannedPeriod
+}
+
+type setBanMsg struct {
+	addr  string
+	since time.Time
+	until time.Time
+	reply chan error
+}
+
+type removeBanMsg struct {
+	addr  string
+	reply chan error
+}
+
+type clearBannedMsg struct {
+	reply chan error
+}
 type getOutboundGroup struct {
 	key   string
 	reply chan int
@@ -1919,6 +1953,29 @@ func (s *server) handleQuery(state *peerState, querymsg interface{}) {
 		})
 		msg.reply <- peers
 
+	case listBannedPeersMsg:
+		banned := map[string]bannedPeriod{}
+		for host, ban := range state.banned {
+			banned[host] = ban
+		}
+		msg.reply <- banned
+
+	case setBanMsg:
+		ban := bannedPeriod{
+			since: msg.since,
+			until: msg.until,
+		}
+		state.banned[msg.addr] = ban
+		msg.reply <- nil
+
+	case removeBanMsg:
+		delete(state.banned, msg.addr)
+		msg.reply <- nil
+
+	case clearBannedMsg:
+		state.banned = map[string]bannedPeriod{}
+		msg.reply <- nil
+
 	case connectNodeMsg:
 		// TODO: duplicate oneshots?
 		// Limit max number of total peers.
@@ -2156,7 +2213,7 @@ func (s *server) peerHandler() {
 		inboundPeers:    make(map[int32]*serverPeer),
 		persistentPeers: make(map[int32]*serverPeer),
 		outboundPeers:   make(map[int32]*serverPeer),
-		banned:          make(map[string]time.Time),
+		banned:          make(map[string]bannedPeriod),
 		outboundGroups:  make(map[string]int),
 	}
 

txscript/claimscript.go

@@ -33,6 +33,9 @@ const (
 
 	// ErrInvalidClaimUpdateScript is returned a claim update script does not conform to the format.
 	ErrInvalidClaimUpdateScript
+
+	// ErrInvalidClaimName is returned when the claim name is invalid.
+	ErrInvalidClaimName
 )
 
 func claimScriptError(c ErrorCode, desc string) Error {
@@ -98,11 +101,15 @@ func ExtractClaimScript(script []byte) (*ClaimScript, error) {
 
 		if !tokenizer.Next() || tokenizer.Opcode() != OP_2DROP ||
 			!tokenizer.Next() || tokenizer.Opcode() != OP_DROP {
-			str := fmt.Sprintf("expect OP_2DROP OP_DROP")
-			return nil, claimScriptError(ErrInvalidClaimNameScript, str)
+			return nil, claimScriptError(ErrInvalidClaimNameScript, "expect OP_2DROP OP_DROP")
 		}
 
 		cs.Size = int(tokenizer.ByteIndex())
+		if cs.Size > MaxClaimScriptSize {
+			str := fmt.Sprintf("script size %d exceeds limit %d", cs.Size, MaxClaimScriptSize)
+			return nil, claimScriptError(ErrInvalidClaimNameScript, str)
+		}
+
 		return &cs, nil
 
 	case OP_SUPPORTCLAIM:
@@ -128,8 +135,7 @@ func ExtractClaimScript(script []byte) (*ClaimScript, error) {
 		case tokenizer.Opcode() == OP_2DROP:
 			// Case 1: OP_SUPPORTCLAIM <Name> <ClaimID> OP_2DROP OP_DROP <P2PKH>
 			if !tokenizer.Next() || tokenizer.Opcode() != OP_DROP {
-				str := fmt.Sprintf("expect OP_2DROP OP_DROP")
-				return nil, claimScriptError(ErrInvalidClaimSupportScript, str)
+				return nil, claimScriptError(ErrInvalidClaimSupportScript, "expect OP_2DROP OP_DROP")
 			}
 
 		case len(tokenizer.Data()) != 0:
@@ -138,19 +144,21 @@ func ExtractClaimScript(script []byte) (*ClaimScript, error) {
 			cs.Value = tokenizer.Data()
 			if !tokenizer.Next() || tokenizer.Opcode() != OP_2DROP ||
 				!tokenizer.Next() || tokenizer.Opcode() != OP_2DROP {
-				str := fmt.Sprintf("expect OP_2DROP OP_2DROP")
-				return nil, claimScriptError(ErrInvalidClaimSupportScript, str)
+				return nil, claimScriptError(ErrInvalidClaimSupportScript, "expect OP_2DROP OP_2DROP")
 			}
 		default:
-			str := fmt.Sprintf("expect OP_2DROP OP_DROP")
-			return nil, claimScriptError(ErrInvalidClaimSupportScript, str)
+			return nil, claimScriptError(ErrInvalidClaimSupportScript, "expect OP_2DROP OP_DROP")
 		}
 
 		cs.Size = int(tokenizer.ByteIndex())
+		if cs.Size > MaxClaimScriptSize {
+			str := fmt.Sprintf("script size %d exceeds limit %d", cs.Size, MaxClaimScriptSize)
+			return nil, claimScriptError(ErrInvalidClaimSupportScript, str)
+		}
+
 		return &cs, nil
 
 	case OP_UPDATECLAIM:
-
 		// OP_UPDATECLAIM <Name> <ClaimID> <Value> OP_2DROP OP_2DROP <P2PKH>
 		if !tokenizer.Next() || len(tokenizer.Data()) > MaxClaimNameSize {
 			str := fmt.Sprintf("name size %d exceeds limit %d", len(tokenizer.data), MaxClaimNameSize)
@@ -177,6 +185,11 @@ func ExtractClaimScript(script []byte) (*ClaimScript, error) {
 		}
 
 		cs.Size = int(tokenizer.ByteIndex())
+		if cs.Size > MaxClaimScriptSize {
+			str := fmt.Sprintf("script size %d exceeds limit %d", cs.Size, MaxClaimScriptSize)
+			return nil, claimScriptError(ErrInvalidClaimUpdateScript, str)
+		}
+
 		return &cs, nil
 
 	default:
@@ -193,7 +206,7 @@ func StripClaimScriptPrefix(script []byte) []byte {
 	return script[cs.Size:]
 }
 
-const illegalChars = "=&#:*$%?/;\\\b\n\t\r\x00"
+const illegalChars = "=&#:$%?/;\\\b\n\t\r\x00"
 
 func AllClaimsAreSane(script []byte, enforceSoftFork bool) error {
 	cs, err := ExtractClaimScript(script)
@@ -205,10 +218,11 @@ func AllClaimsAreSane(script []byte, enforceSoftFork bool) error {
 	}
 	if enforceSoftFork {
 		if !utf8.Valid(cs.Name) {
-			return fmt.Errorf("claim name is not valid UTF-8")
+			return claimScriptError(ErrInvalidClaimName, "claim name is not valid UTF-8")
 		}
 		if bytes.ContainsAny(cs.Name, illegalChars) {
-			return fmt.Errorf("claim name has illegal chars; it should not contain any of these: %s", illegalChars)
+			str := fmt.Sprintf("claim name has illegal chars; it should not contain any of these: %s", illegalChars)
+			return claimScriptError(ErrInvalidClaimName, str)
 		}
 	}
 

txscript/doc.go

@@ -12,7 +12,7 @@ overview to provide information on how to use the package.
 This package provides data structures and functions to parse and execute
 bitcoin transaction scripts.
 
-Script Overview
+# Script Overview
 
 Bitcoin transaction scripts are written in a stack-base, FORTH-like language.
 
@@ -30,7 +30,7 @@ is used to prove the the spender is authorized to perform the transaction.
 One benefit of using a scripting language is added flexibility in specifying
 what conditions must be met in order to spend bitcoins.
 
-Errors
+# Errors
 
 Errors returned by this package are of type txscript.Error.  This allows the
 caller to programmatically determine the specific error by examining the

txscript/error.go

@@ -427,10 +427,10 @@ func (e ErrorCode) String() string {
 
 // Error identifies a script-related error.  It is used to indicate three
 // classes of errors:
-// 1) Script execution failures due to violating one of the many requirements
-//    imposed by the script engine or evaluating to false
-// 2) Improper API usage by callers
-// 3) Internal consistency check failures
+//  1. Script execution failures due to violating one of the many requirements
+//     imposed by the script engine or evaluating to false
+//  2. Improper API usage by callers
+//  3. Internal consistency check failures
 //
 // The caller can use type assertions on the returned errors to access the
 // ErrorCode field to ascertain the specific reason for the error.  As an

txscript/scriptbuilder.go

@@ -37,16 +37,17 @@ func (e ErrScriptNotCanonical) Error() string {
 // For example, the following would build a 2-of-3 multisig script for usage in
 // a pay-to-script-hash (although in this situation MultiSigScript() would be a
 // better choice to generate the script):
-// 	builder := txscript.NewScriptBuilder()
-// 	builder.AddOp(txscript.OP_2).AddData(pubKey1).AddData(pubKey2)
-// 	builder.AddData(pubKey3).AddOp(txscript.OP_3)
-// 	builder.AddOp(txscript.OP_CHECKMULTISIG)
-// 	script, err := builder.Script()
-// 	if err != nil {
-// 		// Handle the error.
-// 		return
-// 	}
-// 	fmt.Printf("Final multi-sig script: %x\n", script)
+//
+//	builder := txscript.NewScriptBuilder()
+//	builder.AddOp(txscript.OP_2).AddData(pubKey1).AddData(pubKey2)
+//	builder.AddData(pubKey3).AddOp(txscript.OP_3)
+//	builder.AddOp(txscript.OP_CHECKMULTISIG)
+//	script, err := builder.Script()
+//	if err != nil {
+//		// Handle the error.
+//		return
+//	}
+//	fmt.Printf("Final multi-sig script: %x\n", script)
 type ScriptBuilder struct {
 	script []byte
 	err    error

txscript/scriptnum.go

@@ -89,18 +89,19 @@ func checkMinimalDataEncoding(v []byte) error {
 // Bytes returns the number serialized as a little endian with a sign bit.
 //
 // Example encodings:
-//       127 -> [0x7f]
-//      -127 -> [0xff]
-//       128 -> [0x80 0x00]
-//      -128 -> [0x80 0x80]
-//       129 -> [0x81 0x00]
-//      -129 -> [0x81 0x80]
-//       256 -> [0x00 0x01]
-//      -256 -> [0x00 0x81]
-//     32767 -> [0xff 0x7f]
-//    -32767 -> [0xff 0xff]
-//     32768 -> [0x00 0x80 0x00]
-//    -32768 -> [0x00 0x80 0x80]
+//
+//	   127 -> [0x7f]
+//	  -127 -> [0xff]
+//	   128 -> [0x80 0x00]
+//	  -128 -> [0x80 0x80]
+//	   129 -> [0x81 0x00]
+//	  -129 -> [0x81 0x80]
+//	   256 -> [0x00 0x01]
+//	  -256 -> [0x00 0x81]
+//	 32767 -> [0xff 0x7f]
+//	-32767 -> [0xff 0xff]
+//	 32768 -> [0x00 0x80 0x00]
+//	-32768 -> [0x00 0x80 0x80]
 func (n scriptNum) Bytes() []byte {
 	// Zero encodes as an empty byte slice.
 	if n == 0 {

version/version.go

@@ -139,7 +139,10 @@ func (v parsedVersion) buildmeta() string {
 }
 
 func (v parsedVersion) full() string {
-	return fmt.Sprintf("%s-%s+%s", v.version, v.prerelease, v.buildmeta())
+	if len(v.prerelease) > 0 {
+		return fmt.Sprintf("%s-%s+%s", v.version, v.prerelease, v.buildmeta())
+	}
+	return fmt.Sprintf("%s+%s", v.version, v.buildmeta())
 }
 
 func parseTag(tag string) (version string, prerelease string, err error) {
@@ -148,7 +151,13 @@ func parseTag(tag string) (version string, prerelease string, err error) {
 		return "", "", fmt.Errorf("tag must be prefixed with v; %s", tag)
 	}
 
-	strs := strings.Split(tag[1:], "-")
+	tag = tag[1:]
+
+	if !strings.Contains(tag, "-") {
+		return tag, "", nil
+	}
+
+	strs := strings.Split(tag, "-")
 
 	if len(strs) != 2 {
 		return "", "", fmt.Errorf("tag must be in the form of Version.Revision; %s", tag)

wire/doc.go

@@ -14,7 +14,7 @@ supported bitcoin messages to and from the wire.  This package does not deal
 with the specifics of message handling such as what to do when a message is
 received.  This provides the caller with a high level of flexibility.
 
-Bitcoin Message Overview
+# Bitcoin Message Overview
 
 The bitcoin protocol consists of exchanging messages between peers.  Each
 message is preceded by a header which identifies information about it such as
@@ -30,7 +30,7 @@ messages, all of the details of marshalling and unmarshalling to and from the
 wire using bitcoin encoding are handled so the caller doesn't have to concern
 themselves with the specifics.
 
-Message Interaction
+# Message Interaction
 
 The following provides a quick summary of how the bitcoin messages are intended
 to interact with one another.  As stated above, these interactions are not
@@ -62,13 +62,13 @@ interactions in no particular order.
 	  in BIP0031.  The BIP0031Version constant can be used to detect a recent
 	  enough protocol version for this purpose (version > BIP0031Version).
 
-Common Parameters
+# Common Parameters
 
 There are several common parameters that arise when using this package to read
 and write bitcoin messages.  The following sections provide a quick overview of
 these parameters so the next sections can build on them.
 
-Protocol Version
+# Protocol Version
 
 The protocol version should be negotiated with the remote peer at a higher
 level than this package via the version (MsgVersion) message exchange, however,
@@ -77,7 +77,7 @@ latest protocol version this package supports and is typically the value to use
 for all outbound connections before a potentially lower protocol version is
 negotiated.
 
-Bitcoin Network
+# Bitcoin Network
 
 The bitcoin network is a magic number which is used to identify the start of a
 message and which bitcoin network the message applies to.  This package provides
@@ -88,7 +88,7 @@ the following constants:
 	wire.TestNet3 (Test network version 3)
 	wire.SimNet   (Simulation test network)
 
-Determining Message Type
+# Determining Message Type
 
 As discussed in the bitcoin message overview section, this package reads
 and writes bitcoin messages using a generic interface named Message.  In
@@ -106,7 +106,7 @@ switch or type assertion.  An example of a type switch follows:
 		fmt.Printf("Number of tx in block: %v", msg.Header.TxnCount)
 	}
 
-Reading Messages
+# Reading Messages
 
 In order to unmarshall bitcoin messages from the wire, use the ReadMessage
 function.  It accepts any io.Reader, but typically this will be a net.Conn to
@@ -121,7 +121,7 @@ a remote node running a bitcoin peer.  Example syntax is:
 		// Log and handle the error
 	}
 
-Writing Messages
+# Writing Messages
 
 In order to marshall bitcoin messages to the wire, use the WriteMessage
 function.  It accepts any io.Writer, but typically this will be a net.Conn to
@@ -139,7 +139,7 @@ from a remote peer is:
 		// Log and handle the error
 	}
 
-Errors
+# Errors
 
 Errors returned by this package are either the raw errors provided by underlying
 calls to read/write from streams such as io.EOF, io.ErrUnexpectedEOF, and
@@ -147,7 +147,7 @@ io.ErrShortWrite, or of type wire.MessageError.  This allows the caller to
 differentiate between general IO errors and malformed messages through type
 assertions.
 
-Bitcoin Improvement Proposals
+# Bitcoin Improvement Proposals
 
 This package includes spec changes outlined by the following BIPs:
 

wire/msgtx.go

@@ -114,16 +114,18 @@ const (
 // transaction from one that would require a different parsing logic.
 //
 // Position of FLAG in a bitcoin tx message:
-//   ┌─────────┬────────────────────┬─────────────┬─────┐
-//   │ VERSION │ FLAG               │ TX-IN-COUNT │ ... │
-//   │ 4 bytes │ 2 bytes (optional) │ varint      │     │
-//   └─────────┴────────────────────┴─────────────┴─────┘
+//
+//	┌─────────┬────────────────────┬─────────────┬─────┐
+//	│ VERSION │ FLAG               │ TX-IN-COUNT │ ... │
+//	│ 4 bytes │ 2 bytes (optional) │ varint      │     │
+//	└─────────┴────────────────────┴─────────────┴─────┘
 //
 // Zooming into the FLAG field:
-//   ┌── FLAG ─────────────┬────────┐
-//   │ TxFlagMarker (0x00) │ TxFlag │
-//   │ 1 byte              │ 1 byte │
-//   └─────────────────────┴────────┘
+//
+//	┌── FLAG ─────────────┬────────┐
+//	│ TxFlagMarker (0x00) │ TxFlag │
+//	│ 1 byte              │ 1 byte │
+//	└─────────────────────┴────────┘
 const TxFlagMarker = 0x00
 
 // TxFlag is the second byte of the FLAG field in a bitcoin tx message.