LBRYCommunity/lbcd
1
0
Fork 0
Code Issues 17 Pull requests 4 Projects Releases 28 Packages Wiki Activity
lbcd/sample-btcd.conf
Dave Collins 7d35bc9460 Add --rpcmaxwebsockets option with default of 25. 
This commit adds a new configuration option, --rpcmaxwebsockets, to limit the
number of max RPC websocket clients that are served concurrently.
2014-02-19 00:53:14 -06:00

169 lines
7.7 KiB
Text
Raw Blame History

[Application Options]
; ------------------------------------------------------------------------------
; Data settings
; ------------------------------------------------------------------------------
; The directory to store data such as the block chain and peer addresses. The
; block chain takes several GB, so this location must have a lot of free space.
; The default is ~/.btcd/data on POSIX OSes, $LOCALAPPDATA/Btcd/data on Windows,
; ~/Library/Application Support/Btcd/data on Mac OS, and $home/btcd/data on
; Plan9. Environment variables are expanded so they may be used. NOTE: Windows
; environment variables are typically %VARIABLE%, but they must be accessed with
; $VARIABLE here. Also, ~ is expanded to $LOCALAPPDATA on Windows.
; datadir=~/.btcd/data
; ------------------------------------------------------------------------------
; Network settings
; ------------------------------------------------------------------------------
; Use testnet.
; testnet=1
; Connect via a SOCKS5 proxy. NOTE: Specifying a proxy will disable listening
; for incoming connections unless listen addresses are provided via the 'listen'
; option.
; proxy=127.0.0.1:9050
; proxyuser=
; proxypass=
; The SOCKS5 proxy above is assumed to be Tor (https://www.torproject.org).
; If the proxy is not tor the the following my be used to prevent using
; tor specific SOCKS queries to lookup addresses (this increases anonymity when
; tor is used by preventing your IP being leaked via DNS).
; noonion=1
; Use an alternative proxy to connect to .onion addresses. The proxy is assumed
; to be a Tor node. Non .onion addresses will be contacted with the main proxy
; or without a proxy if none is set.
; onion=127.0.0.1:9051
; ******************************************************************************
; Summary of 'addpeer' versus 'connect'.
;
; Only one of the following two options, 'addpeer' and 'connect', may be
; specified. Both allow you to specify peers that you want to stay connected
; with, but the behavior is slightly different. By default, btcd will query DNS
; to find peers to connect to, so unless you have a specific reason such as
; those described below, you probably won't need to modify anything here.
;
; 'addpeer' does not prevent connections to other peers discovered from
; the peers you are connected to and also lets the remote peers know you are
; available so they can notify other peers they can to connect to you. This
; option might be useful if you are having problems finding a node for some
; reason (perhaps due to a firewall).
;
; 'connect', on the other hand, will ONLY connect to the specified peers and
; no others. It also disables listening (unless you explicitly set listen
; addresses via the 'listen' option) and DNS seeding, so you will not be
; advertised as an available peer to the peers you connect to and won't accept
; connections from any other peers. So, the 'connect' option effectively allows
; you to only connect to "trusted" peers.
; ******************************************************************************
; Add persistent peers to connect to as desired. One peer per line.
; You may specify each IP address with or without a port. The default port will
; be added automatically if one is not specified here.
; addpeer=192.168.1.1
; addpeer=10.0.0.2:8333
; addpeer=fe80::1
; addpeer=[fe80::2]:8333
; Add persistent peers that you ONLY want to connect to as desired. One peer
; per line. You may specify each IP address with or without a port. The
; default port will be added automatically if one is not specified here.
; NOTE: Specifying this option has other side effects as described above in
; the 'addpeer' versus 'connect' summary section.
; connect=192.168.1.1
; connect=10.0.0.2:8333
; connect=fe80::1
; connect=[fe80::2]:8333
; Maximum number of inbound and outbound peers.
; maxpeers=8
; How long to ban misbehaving peers. Valid time units are {s, m, h}.
; Minimum 1s.
; banduration=24h
; banduration=11h30m15s
; Disable DNS seeding for peers. By default, when btcd starts, it will use
; DNS to query for available peers to connect with.
; nodnsseed=1
; Specify the interfaces to listen on. One listen address per line.
; NOTE: The default port is modified by some options such as 'testnet', so it is
; recommended to not specify a port and allow a proper default to be chosen
; unless you have a specific reason to do otherwise.
; listen= ; all interfaces on default port (this is the default)
; listen=0.0.0.0 ; all ipv4 interfaces on default port
; listen=:: ; all ipv6 interfaces on default port
; listen=:8333 ; all interfaces on port 8333
; listen=0.0.0.0:8333 ; all ipv4 interfaces on port 8333
; listen=[::]:8333 ; all ipv6 interfaces on port 8333
; listen=127.0.0.1:8333 ; only ipv4 localhost on port 8333
; listen=[::1]:8333 ; only ipv6 localhost on port 8333
; listen=127.0.0.1:8336 ; only ipv4 localhost on non-standard port 8336
; listen=:8336 ; all interfaces on non-standard port 8336
; listen=0.0.0.0:8336 ; all ipv4 interfaces on non-standard port 8336
; listen=[::]:8336 ; all ipv6 interfaces on non-standard port 8336
; Disable listening for incoming connections. This will override all listeners.
; nolisten=1
; ------------------------------------------------------------------------------
; RPC server options - The following options control the built-in RPC server
; which is used to control and query information from a running btcd process.
;
; NOTE: The RPC server is disabled by default if no rpcuser or rpcpass is
; specified.
; ------------------------------------------------------------------------------
; Secure the RPC API by specifying the username and password. You must specify
; both or the RPC server will be disabled.
; rpcuser=whatever_username_you_want
; rpcpass=
; Specify the interfaces for the RPC server listen on. One listen address per
; line. NOTE: The default port is modified by some options such as 'testnet',
; so it is recommended to not specify a port and allow a proper default to be
; chosen unless you have a specific reason to do otherwise.
; rpclisten= ; all interfaces on default port (this is the default)
; rpclisten=0.0.0.0 ; all ipv4 interfaces on default port
; rpclisten=:: ; all ipv6 interfaces on default port
; rpclisten=:8334 ; all interfaces on port 8334
; rpclisten=0.0.0.0:8334 ; all ipv4 interfaces on port 8334
; rpclisten=[::]:8334 ; all ipv6 interfaces on port 8334
; rpclisten=127.0.0.1:8334 ; only ipv4 localhost on port 8334
; rpclisten=[::1]:8334 ; only ipv6 localhost on port 8334
; rpclisten=127.0.0.1:8337 ; only ipv4 localhost on non-standard port 8337
; rpclisten=:8337 ; all interfaces on non-standard port 8337
; rpclisten=0.0.0.0:8337 ; all ipv4 interfaces on non-standard port 8337
; rpclisten=[::]:8337 ; all ipv6 interfaces on non-standard port 8337
; Specify the maximum number of concurrent RPC clients for standard connections.
; rpcmaxclients=10
; Specify the maximum number of concurrent RPC websocket clients.
; rpcmaxwebsockets=25
; Use the following setting to disable the RPC server even if the rpcuser and
; rpcpass are specified above. This allows one to quickly disable the RPC
; server without having to remove credentials from the config file.
; norpc=1
; ------------------------------------------------------------------------------
; Debug
; ------------------------------------------------------------------------------
; Debug logging level.
; Valid options are {trace, debug, info, warn, error, critical}
; debuglevel=info
; The port used to listen for HTTP profile requests. The profile server will
; be disabled if this option is not specified. The profile information can be
; accessed at http://localhost:<profileport>/debug/pprof once running.
; profile=6061
Reference in a new issue View git blame Copy permalink