lbcd/accept.go
Dave Collins b041971ca8 Export CalcNextRequiredDifficutly function.
This commit exports a new variant of the existing internal
calcNextRequiredDifficulty function which calculates and returns the next
required difficulty for a block after the end of the current best chain
based on the difficulty retarget rules.

In order to support the exported function the internal one was slightly
modified to accept the block timestamp instead of an entire block since
the timestamp is all that is needed and the caller of the exported
function might next have a full block yet.
2014-03-02 18:43:41 -06:00

195 lines
6.3 KiB
Go

// Copyright (c) 2013-2014 Conformal Systems LLC.
// Use of this source code is governed by an ISC
// license that can be found in the LICENSE file.
package btcchain
import (
"fmt"
"github.com/conformal/btcutil"
"github.com/conformal/btcwire"
)
// maybeAcceptBlock potentially accepts a block into the memory block chain.
// It performs several validation checks which depend on its position within
// the block chain before adding it. The block is expected to have already gone
// through ProcessBlock before calling this function with it.
// The fastAdd argument modifies the behavior of the function by avoiding the
// somewhat expensive operation: BIP34 validation, it also passes the argument
// down to connectBestChain()
func (b *BlockChain) maybeAcceptBlock(block *btcutil.Block, fastAdd bool) error {
// Get a block node for the block previous to this one. Will be nil
// if this is the genesis block.
prevNode, err := b.getPrevNodeFromBlock(block)
if err != nil {
log.Errorf("getPrevNodeFromBlock: %v", err)
return err
}
// The height of this block is one more than the referenced previous
// block.
blockHeight := int64(0)
if prevNode != nil {
blockHeight = prevNode.height + 1
}
block.SetHeight(blockHeight)
blockHeader := &block.MsgBlock().Header
if !fastAdd {
// Ensure the difficulty specified in the block header matches
// the calculated difficulty based on the previous block and
// difficulty retarget rules.
expectedDifficulty, err := b.calcNextRequiredDifficulty(prevNode,
block.MsgBlock().Header.Timestamp)
if err != nil {
return err
}
blockDifficulty := blockHeader.Bits
if blockDifficulty != expectedDifficulty {
str := "block difficulty of %d is not the expected value of %d"
str = fmt.Sprintf(str, blockDifficulty, expectedDifficulty)
return RuleError(str)
}
// Ensure the timestamp for the block header is after the
// median time of the last several blocks (medianTimeBlocks).
medianTime, err := b.calcPastMedianTime(prevNode)
if err != nil {
log.Errorf("calcPastMedianTime: %v", err)
return err
}
if !blockHeader.Timestamp.After(medianTime) {
str := "block timestamp of %v is not after expected %v"
str = fmt.Sprintf(str, blockHeader.Timestamp,
medianTime)
return RuleError(str)
}
// Ensure all transactions in the block are finalized.
for _, tx := range block.Transactions() {
if !IsFinalizedTransaction(tx, blockHeight,
blockHeader.Timestamp) {
str := fmt.Sprintf("block contains "+
"unfinalized transaction %v", tx.Sha())
return RuleError(str)
}
}
}
// Ensure chain matches up to predetermined checkpoints.
// It's safe to ignore the error on Sha since it's already cached.
blockHash, _ := block.Sha()
if !b.verifyCheckpoint(blockHeight, blockHash) {
// TODO(davec): This should probably be a distinct error type
// (maybe CheckpointError). Since this error shouldn't happen
// unless the peer is connected to a rogue network serving up an
// alternate chain, the caller would likely need to react by
// disconnecting peers and rolling back the chain to the last
// known good point.
str := fmt.Sprintf("block at height %d does not match "+
"checkpoint hash", blockHeight)
return RuleError(str)
}
// Find the previous checkpoint and prevent blocks which fork the main
// chain before it. This prevents storage of new, otherwise valid,
// blocks which build off of old blocks that are likely at a much easier
// difficulty and therefore could be used to waste cache and disk space.
checkpointBlock, err := b.findPreviousCheckpoint()
if err != nil {
return err
}
if checkpointBlock != nil && blockHeight < checkpointBlock.Height() {
str := fmt.Sprintf("block at height %d forks the main chain "+
"before the previous checkpoint at height %d",
blockHeight, checkpointBlock.Height())
return RuleError(str)
}
if !fastAdd {
// Reject version 1 blocks once a majority of the network has
// upgraded.
// Rules:
// 95% (950 / 1000) for main network
// 75% (75 / 100) for the test network
// This is part of BIP_0034.
if blockHeader.Version == 1 {
minRequired := uint64(950)
numToCheck := uint64(1000)
if b.btcnet == btcwire.TestNet3 || b.btcnet ==
btcwire.TestNet {
minRequired = 75
numToCheck = 100
}
if b.isMajorityVersion(2, prevNode, minRequired,
numToCheck) {
str := "new blocks with version %d are no longer valid"
str = fmt.Sprintf(str, blockHeader.Version)
return RuleError(str)
}
}
// Ensure coinbase starts with serialized block heights for
// blocks whose version is the serializedHeightVersion or
// newer once a majority of the network has upgraded.
// Rules:
// 75% (750 / 1000) for main network
// 51% (51 / 100) for the test network
// This is part of BIP_0034.
if blockHeader.Version >= serializedHeightVersion {
minRequired := uint64(750)
numToCheck := uint64(1000)
if b.btcnet == btcwire.TestNet3 || b.btcnet ==
btcwire.TestNet {
minRequired = 51
numToCheck = 100
}
if b.isMajorityVersion(serializedHeightVersion,
prevNode, minRequired, numToCheck) {
expectedHeight := int64(0)
if prevNode != nil {
expectedHeight = prevNode.height + 1
}
coinbaseTx := block.Transactions()[0]
err := checkSerializedHeight(coinbaseTx,
expectedHeight)
if err != nil {
return err
}
}
}
}
// Prune block nodes which are no longer needed before creating
// a new node.
err = b.pruneBlockNodes()
if err != nil {
return err
}
// Create a new block node for the block and add it to the in-memory
// block chain (could be either a side chain or the main chain).
newNode := newBlockNode(blockHeader, blockHash, blockHeight)
if prevNode != nil {
newNode.parent = prevNode
newNode.height = blockHeight
newNode.workSum.Add(prevNode.workSum, newNode.workSum)
}
// Connect the passed block to the chain while respecting proper chain
// selection according to the chain with the most proof of work. This
// also handles validation of the transaction scripts.
err = b.connectBestChain(newNode, block, fastAdd)
if err != nil {
return err
}
// Notify the caller that the new block was accepted into the block
// chain. The caller would typically want to react by relaying the
// inventory to other peers.
b.sendNotification(NTBlockAccepted, block)
return nil
}