lbcd/doc.go

// Copyright (c) 2014 Conformal Systems LLC.
// Use of this source code is governed by an ISC
// license that can be found in the LICENSE file.

/*
Package btcrpcclient implements a websocket-enabled Bitcoin JSON-RPC client.

Overview

This client provides a robust and easy to use client for interfacing with a
Bitcoin RPC server that uses a btcd/bitcoin core compatible Bitcoin JSON-RPC
API.  This client has been tested with btcd (https://github.com/conformal/btcd),
btcwallet (https://github.com/conformal/btcwallet), and
bitcoin core (https://github.com/bitcoin).

In addition to the compatible standard HTTP POST JSON-RPC API, btcd and
btcwallet provide a websocket interface that is more efficient than the standard
HTTP POST method of accessing RPC.  The section below discusses the differences
between HTTP POST and websockets.

By default, this client assumes the RPC server supports websockets and has
TLS enabled.  In practice, this currently means it assumes you are talking to
btcd or btcwallet by default.  However, configuration options are provided to
fall back to HTTP POST and disable TLS to support talking with inferior bitcoin
core style RPC servers.

Websockets vs HTTP POST

In HTTP POST-based JSON-RPC, every request creates a new HTTP connection,
issues the call, waits for the response, and closes the connection.  This adds
quite a bit of overhead to every call and lacks flexibility for features such as
notifications.

In contrast, the websocket-based JSON-RPC interface provided by btcd and
btcwallet only uses a single connection that remains open and allows
asynchronous bi-directional communication.

The websocket interface supports all of the same commands as HTTP POST, but they
can be invoked without having to go through a connect/disconnect cycle for every
call.  In addition, the websocket interface provides other nice features such as
the ability to register for asynchronous notifications of various events.

Synchronous vs Asynchronous API

The client provides both a synchronous (blocking) and asynchronous API.

The synchronous (blocking) API is typically sufficient for most use cases.  It
works by issuing the RPC and blocking until the response is received.  This
allows  straightforward code where you have the response as soon as the function
returns.

The asynchronous API works on the concept of futures.  When you invoke the async
version of a command, it will quickly return an instance of a type that promises
to provide the result of the RPC at some future time.  In the background, the
RPC call is issued and the result is stored in the returned instance.  Invoking
the Receive method on the returned instance will either return the result
immediately if it has already arrived, or block until it has.  This is useful
since it provides the caller with greater control over concurrency.

Notifications

The first important part of notifications is to realize that they will only
work when connected via websockets.  This should intuitively make sense
because HTTP POST mode does not keep a connection open!

All notifications provided by btcd require registration to opt-in.  For example,
if you want to be notified when funds are received by a set of addresses, you
register the addresses via the NotifyReceived (or NotifyReceivedAsync) function.

Notification Handlers

Notifications are exposed by the client through the use of callback handlers
which are setup via a NotificationHandlers instance that is specified by the
caller when creating the client.

It is important that these notification handlers complete quickly since they
are intentionally in the main read loop and will block further reads until
they complete.  This provides the caller with the flexibility to decide what to
do when notifications are coming in faster than they are being handled.

In particular this means issuing a blocking RPC call from a callback handler
will cause a deadlock as more server responses won't be read until the callback
returns, but the callback would be waiting for a response.   Thus, any
additional RPCs must be issued an a completely decoupled manner.

Automatic Reconnection

By default, when running in websockets mode, this client will automatically
keep trying to reconnect to the RPC server should the connection be lost.  There
is a back-off in between each connection attempt until it reaches one try per
minute.  Once a connection is re-established, all previously registered
notifications are automatically re-registered and any in-flight commands are
re-issued.  This means from the caller's perspective, the request simply takes
longer to complete.

The caller may invoke the Shutdown method on the client to force the client
to cease reconnect attempts and return ErrClientShutdown for all outstanding
commands.

The automatic reconnection can be disabled by setting the DisableAutoReconnect
flag to true in the connection config when creating the client.

Minor RPC Server Differences and Chain/Wallet Separation

Some of the commands are extensions specific to a particular RPC server.  For
example, the DebugLevel call is an extension only provided by btcd (and
btcwallet passthrough).  Therefore if you call one of these commands against
an RPC server that doesn't provide them, you will get an unimplemented error
from the server.  An effort has been made to call out which commmands are
extensions in their documentation.

Also, it is important to realize that btcd intentionally separates the wallet
functionality into a separate process named btcwallet.  This means if you are
connected to the btcd RPC server directly, only the RPCs which are related to
chain services will be available.  Depending on your application, you might only
need chain-related RPCs.  In contrast, btcwallet provides pass through treatment
for chain-related RPCs, so it supports them in addition to wallet-related RPCs.

Errors

There are 3 categories of errors that will be returned throughout this package:

  - Errors related to the client connection such as authentication, endpoint,
    disconnect, and shutdown
  - Errors that occur before communicating with the remote RPC server such as
    command creation and marshaling errors or issues talking to the remote
    server
  - Errors returned from the remote RPC server like unimplemented commands,
    nonexistent requested blocks and transactions, malformed data, and incorrect
    networks

The first category of errors are typically one of ErrInvalidAuth,
ErrInvalidEndpoint, ErrClientDisconnect, or ErrClientShutdown.

NOTE: The ErrClientDisconnect will not be returned unless the
DisableAutoReconnect flag is set since the client automatically handles
reconnect by default as previously described.

The second category of errors typically indicates a programmer error and as such
the type can vary, but usually will be best handled by simply showing/logging
it.

The third category of errors, that is errors returned by the server, can be
detected by type asserting the error is a *btcjson.Error.  For example, to
detect if a command is unimplemented by the remote RPC server:

  amount, err := client.GetBalance("")
  if err != nil {
  	if jerr, ok := err.(*btcjson.Error); ok {
  		switch jerr.Code {
		case btcjson.ErrUnimplemented.Code:
  			// Handle not implemented error

  		// Handle other specific errors you care about
		}
  	}

  	// Log or otherwise handle the error knowing it was not one returned
  	// from the remote RPC server.
  }

Example Usage

The following full-blown client examples are in the examples directory:

 - bitcoincorehttp
   Connects to a bitcoin core RPC server using HTTP POST mode with TLS disabled
   and gets the current block count
 - btcdwebsockets
   Connects to a btcd RPC server using TLS-secured websockets, registers for
   block connected and block disconnected notifications, and gets the current
   block count
*/
package btcrpcclient