lbcwallet/wallet/wallet.go

// Copyright (c) 2013-2017 The btcsuite developers
// Copyright (c) 2015-2016 The Decred developers
// Use of this source code is governed by an ISC
// license that can be found in the LICENSE file.

package wallet

import (
	"bytes"
	"encoding/hex"
	"errors"
	"fmt"
	"sort"
	"strings"
	"sync"
	"time"

	"github.com/davecgh/go-spew/spew"
	"github.com/lbryio/lbcd/blockchain"
	"github.com/lbryio/lbcd/btcec"
	"github.com/lbryio/lbcd/btcjson"
	"github.com/lbryio/lbcd/chaincfg"
	"github.com/lbryio/lbcd/chaincfg/chainhash"
	"github.com/lbryio/lbcd/txscript"
	"github.com/lbryio/lbcd/wire"
	btcutil "github.com/lbryio/lbcutil"
	"github.com/lbryio/lbcutil/hdkeychain"
	"github.com/lbryio/lbcwallet/chain"
	"github.com/lbryio/lbcwallet/internal/prompt"
	"github.com/lbryio/lbcwallet/waddrmgr"
	"github.com/lbryio/lbcwallet/wallet/txauthor"
	"github.com/lbryio/lbcwallet/wallet/txrules"
	"github.com/lbryio/lbcwallet/walletdb"
	"github.com/lbryio/lbcwallet/walletdb/migration"
	"github.com/lbryio/lbcwallet/wtxmgr"
)

const (
	// InsecurePubPassphrase is the default outer encryption passphrase used
	// for public data (everything but private keys).  Using a non-default
	// public passphrase can prevent an attacker without the public
	// passphrase from discovering all past and future wallet addresses if
	// they gain access to the wallet database.
	//
	// NOTE: at time of writing, public encryption only applies to public
	// data in the waddrmgr namespace.  Transactions are not yet encrypted.
	InsecurePubPassphrase = "public"

	// recoveryBatchSize is the default number of blocks that will be
	// scanned successively by the recovery manager, in the event that the
	// wallet is started in recovery mode.
	recoveryBatchSize = 2000
)

var (
	// ErrNotSynced describes an error where an operation cannot complete
	// due wallet being out of sync (and perhaps currently syncing with)
	// the remote chain server.
	ErrNotSynced = errors.New("wallet is not synchronized with the chain server")

	// ErrWalletShuttingDown is an error returned when we attempt to make a
	// request to the wallet but it is in the process of or has already shut
	// down.
	ErrWalletShuttingDown = errors.New("wallet shutting down")

	// ErrUnknownTransaction is returned when an attempt is made to label
	// a transaction that is not known to the wallet.
	ErrUnknownTransaction = errors.New("cannot label transaction not " +
		"known to wallet")

	// ErrTxLabelExists is returned when a transaction already has a label
	// and an attempt has been made to label it without setting overwrite
	// to true.
	ErrTxLabelExists = errors.New("transaction already labelled")

	// ErrTxUnsigned is returned when a transaction is created in the
	// watch-only mode where we can select coins but not sign any inputs.
	ErrTxUnsigned = errors.New("watch-only wallet, transaction not signed")

	// Namespace bucket keys.
	waddrmgrNamespaceKey = []byte("waddrmgr")
	wtxmgrNamespaceKey   = []byte("wtxmgr")
)

type CoinSelectionStrategy int

const (
	// CoinSelectionLargest always picks the largest available utxo to add
	// to the transaction next.
	CoinSelectionLargest CoinSelectionStrategy = iota

	// CoinSelectionRandom randomly selects the next utxo to add to the
	// transaction. This strategy prevents the creation of ever smaller
	// utxos over time.
	CoinSelectionRandom
)

// Wallet is a structure containing all the components for a
// complete wallet.  It contains the Armory-style key store
// addresses and keys),
type Wallet struct {
	publicPassphrase []byte

	// Data stores
	db      walletdb.DB
	Manager *waddrmgr.Manager
	TxStore *wtxmgr.Store

	chainClient        chain.Interface
	chainClientLock    sync.Mutex
	chainClientSynced  bool
	chainClientSyncMtx sync.Mutex

	lockedOutpoints    map[wire.OutPoint]struct{}
	lockedOutpointsMtx sync.Mutex

	recoveryWindow uint32

	// Channels for rescan processing.  Requests are added and merged with
	// any waiting requests, before being sent to another goroutine to
	// call the rescan RPC.
	rescanAddJob        chan *RescanJob
	rescanBatch         chan *rescanBatch
	rescanNotifications chan interface{} // From chain server
	rescanProgress      chan *RescanProgressMsg
	rescanFinished      chan *RescanFinishedMsg

	// Channel for transaction creation requests.
	createTxRequests chan createTxRequest

	// Channels for the manager locker.
	unlockRequests     chan unlockRequest
	lockRequests       chan struct{}
	holdUnlockRequests chan chan heldUnlock
	lockState          chan bool
	changePassphrase   chan changePassphraseRequest
	changePassphrases  chan changePassphrasesRequest

	NtfnServer *NotificationServer

	chainParams *chaincfg.Params
	wg          sync.WaitGroup

	started bool
	quit    chan struct{}
	quitMu  sync.Mutex
}

// Start starts the goroutines necessary to manage a wallet.
func (w *Wallet) Start() {
	w.quitMu.Lock()
	select {
	case <-w.quit:
		// Restart the wallet goroutines after shutdown finishes.
		w.WaitForShutdown()
		w.quit = make(chan struct{})
	default:
		// Ignore when the wallet is still running.
		if w.started {
			w.quitMu.Unlock()
			return
		}
		w.started = true
	}
	w.quitMu.Unlock()

	w.wg.Add(2)
	go w.txCreator()
	go w.walletLocker()
}

// SynchronizeRPC associates the wallet with the consensus RPC client,
// synchronizes the wallet with the latest changes to the blockchain, and
// continuously updates the wallet through RPC notifications.
//
// This method is unstable and will be removed when all syncing logic is moved
// outside of the wallet package.
func (w *Wallet) SynchronizeRPC(chainClient chain.Interface) {
	w.quitMu.Lock()
	select {
	case <-w.quit:
		w.quitMu.Unlock()
		return
	default:
	}
	w.quitMu.Unlock()

	// TODO: Ignoring the new client when one is already set breaks callers
	// who are replacing the client, perhaps after a disconnect.
	w.chainClientLock.Lock()
	if w.chainClient != nil {
		w.chainClientLock.Unlock()
		return
	}
	w.chainClient = chainClient

	w.chainClientLock.Unlock()

	// TODO: It would be preferable to either run these goroutines
	// separately from the wallet (use wallet mutator functions to
	// make changes from the RPC client) and not have to stop and
	// restart them each time the client disconnects and reconnets.
	w.wg.Add(4)
	go w.handleChainNotifications()
	go w.rescanBatchHandler()
	go w.rescanProgressHandler()
	go w.rescanRPCHandler()
}

// requireChainClient marks that a wallet method can only be completed when the
// consensus RPC server is set.  This function and all functions that call it
// are unstable and will need to be moved when the syncing code is moved out of
// the wallet.
func (w *Wallet) requireChainClient() (chain.Interface, error) {
	w.chainClientLock.Lock()
	chainClient := w.chainClient
	w.chainClientLock.Unlock()
	if chainClient == nil {
		return nil, errors.New("blockchain RPC is inactive")
	}
	return chainClient, nil
}

// ChainClient returns the optional consensus RPC client associated with the
// wallet.
//
// This function is unstable and will be removed once sync logic is moved out of
// the wallet.
func (w *Wallet) ChainClient() chain.Interface {
	w.chainClientLock.Lock()
	chainClient := w.chainClient
	w.chainClientLock.Unlock()
	return chainClient
}

// quitChan atomically reads the quit channel.
func (w *Wallet) quitChan() <-chan struct{} {
	w.quitMu.Lock()
	c := w.quit
	w.quitMu.Unlock()
	return c
}

// Stop signals all wallet goroutines to shutdown.
func (w *Wallet) Stop() {
	w.quitMu.Lock()
	quit := w.quit
	w.quitMu.Unlock()

	select {
	case <-quit:
	default:
		close(quit)
		w.chainClientLock.Lock()
		if w.chainClient != nil {
			w.chainClient.Stop()
			w.chainClient = nil
		}
		w.chainClientLock.Unlock()
	}
}

// ShuttingDown returns whether the wallet is currently in the process of
// shutting down or not.
func (w *Wallet) ShuttingDown() bool {
	select {
	case <-w.quitChan():
		return true
	default:
		return false
	}
}

// WaitForShutdown blocks until all wallet goroutines have finished executing.
func (w *Wallet) WaitForShutdown() {
	w.chainClientLock.Lock()
	if w.chainClient != nil {
		w.chainClient.WaitForShutdown()
	}
	w.chainClientLock.Unlock()
	w.wg.Wait()
}

// SynchronizingToNetwork returns whether the wallet is currently synchronizing
// with the Bitcoin network.
func (w *Wallet) SynchronizingToNetwork() bool {
	// At the moment, RPC is the only synchronization method.  In the
	// future, when SPV is added, a separate check will also be needed, or
	// SPV could always be enabled if RPC was not explicitly specified when
	// creating the wallet.
	w.chainClientSyncMtx.Lock()
	syncing := w.chainClient != nil
	w.chainClientSyncMtx.Unlock()
	return syncing
}

// ChainSynced returns whether the wallet has been attached to a chain server
// and synced up to the best block on the main chain.
func (w *Wallet) ChainSynced() bool {
	w.chainClientSyncMtx.Lock()
	synced := w.chainClientSynced
	w.chainClientSyncMtx.Unlock()
	return synced
}

// SetChainSynced marks whether the wallet is connected to and currently in sync
// with the latest block notified by the chain server.
//
// NOTE: Due to an API limitation with rpcclient, this may return true after
// the client disconnected (and is attempting a reconnect).  This will be unknown
// until the reconnect notification is received, at which point the wallet can be
// marked out of sync again until after the next rescan completes.
func (w *Wallet) SetChainSynced(synced bool) {
	w.chainClientSyncMtx.Lock()
	w.chainClientSynced = synced
	w.chainClientSyncMtx.Unlock()
}

// activeData returns the currently-active receiving addresses and all unspent
// outputs.  This is primarely intended to provide the parameters for a
// rescan request.
func (w *Wallet) activeData(dbtx walletdb.ReadWriteTx) ([]btcutil.Address, []wtxmgr.Credit, error) {
	addrmgrNs := dbtx.ReadBucket(waddrmgrNamespaceKey)
	txmgrNs := dbtx.ReadWriteBucket(wtxmgrNamespaceKey)

	var addrs []btcutil.Address
	err := w.Manager.ForEachRelevantActiveAddress(
		addrmgrNs, func(addr btcutil.Address) error {
			addrs = append(addrs, addr)
			return nil
		},
	)
	if err != nil {
		return nil, nil, err
	}

	// Before requesting the list of spendable UTXOs, we'll delete any
	// expired output locks.
	err = w.TxStore.DeleteExpiredLockedOutputs(
		dbtx.ReadWriteBucket(wtxmgrNamespaceKey),
	)
	if err != nil {
		return nil, nil, err
	}

	unspent, err := w.TxStore.UnspentOutputs(txmgrNs)
	return addrs, unspent, err
}

// syncWithChain brings the wallet up to date with the current chain server
// connection. It creates a rescan request and blocks until the rescan has
// finished. The birthday block can be passed in, if set, to ensure we can
// properly detect if it gets rolled back.
func (w *Wallet) syncWithChain(birthdayStamp *waddrmgr.BlockStamp) error {
	chainClient, err := w.requireChainClient()
	if err != nil {
		return err
	}

	// We'll wait until the backend is synced to ensure we get the latest
	// MaxReorgDepth blocks to store. We don't do this for development
	// environments as we can't guarantee a lively chain, except for
	// Neutrino, where the cfheader server tells us what it believes the
	// chain tip is.
	if !w.isDevEnv() {
		log.Debug("Waiting for chain backend to sync to tip")
		if err := w.waitUntilBackendSynced(chainClient); err != nil {
			return err
		}
		log.Debug("Chain backend synced to tip!")
	}

	// If we've yet to find our birthday block, we'll do so now.
	if birthdayStamp == nil {
		var err error
		birthdayStamp, err = locateBirthdayBlock(
			chainClient, w.Manager.Birthday(),
		)
		if err != nil {
			return fmt.Errorf("unable to locate birthday block: %v",
				err)
		}

		// We'll also determine our initial sync starting height. This
		// is needed as the wallet can now begin storing blocks from an
		// arbitrary height, rather than all the blocks from genesis, so
		// we persist this height to ensure we don't store any blocks
		// before it.
		startHeight := birthdayStamp.Height

		// With the starting height obtained, get the remaining block
		// details required by the wallet.
		startHash, err := chainClient.GetBlockHash(int64(startHeight))
		if err != nil {
			return err
		}
		startHeader, err := chainClient.GetBlockHeader(startHash)
		if err != nil {
			return err
		}

		err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
			ns := tx.ReadWriteBucket(waddrmgrNamespaceKey)
			err := w.Manager.SetSyncedTo(ns, &waddrmgr.BlockStamp{
				Hash:      *startHash,
				Height:    startHeight,
				Timestamp: startHeader.Timestamp,
			})
			if err != nil {
				return err
			}
			return w.Manager.SetBirthdayBlock(ns, *birthdayStamp, true)
		})
		if err != nil {
			return fmt.Errorf("unable to persist initial sync "+
				"data: %v", err)
		}
	}

	// If the wallet requested an on-chain recovery of its funds, we'll do
	// so now.
	if w.recoveryWindow > 0 {
		if err := w.recovery(chainClient, birthdayStamp); err != nil {
			return fmt.Errorf("unable to perform wallet recovery: "+
				"%v", err)
		}
	}

	// Compare previously-seen blocks against the current chain. If any of
	// these blocks no longer exist, rollback all of the missing blocks
	// before catching up with the rescan.
	rollback := false
	rollbackStamp := w.Manager.SyncedTo()

	// Handle corner cases where the chain has reorged to a lower height
	// than the wallet had synced to. This could happen if the chain has
	// reorged to a shorter chain with difficulty greater than the current.
	// Most of the time, it's only temporary since the chain will grow
	// past the previous height anyway. In regtest, however, it burdens
	// the testing setup without this check.
	bestBlockHash, bestBlockHeight, err := chainClient.GetBestBlock()
	if err != nil {
		return err
	}
	if rollbackStamp.Height > bestBlockHeight {
		rollbackStamp.Hash = *bestBlockHash
		rollbackStamp.Height = bestBlockHeight
		rollback = true
	}

	err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
		addrmgrNs := tx.ReadWriteBucket(waddrmgrNamespaceKey)
		txmgrNs := tx.ReadWriteBucket(wtxmgrNamespaceKey)

		for height := rollbackStamp.Height; true; height-- {
			hash, err := w.Manager.BlockHash(addrmgrNs, height)
			if err != nil {
				return err
			}
			chainHash, err := chainClient.GetBlockHash(int64(height))
			if err != nil {
				return err
			}
			header, err := chainClient.GetBlockHeader(chainHash)
			if err != nil {
				return err
			}

			rollbackStamp.Hash = *chainHash
			rollbackStamp.Height = height
			rollbackStamp.Timestamp = header.Timestamp

			if bytes.Equal(hash[:], chainHash[:]) {
				break
			}
			rollback = true
		}

		// If a rollback did not happen, we can proceed safely.
		if !rollback {
			return nil
		}

		// Otherwise, we'll mark this as our new synced height.
		err := w.Manager.SetSyncedTo(addrmgrNs, &rollbackStamp)
		if err != nil {
			return err
		}

		// If the rollback happened to go beyond our birthday stamp,
		// we'll need to find a new one by syncing with the chain again
		// until finding one.
		if rollbackStamp.Height <= birthdayStamp.Height &&
			rollbackStamp.Hash != birthdayStamp.Hash {

			err := w.Manager.SetBirthdayBlock(
				addrmgrNs, rollbackStamp, true,
			)
			if err != nil {
				return err
			}
		}

		// Finally, we'll roll back our transaction store to reflect the
		// stale state. `Rollback` unconfirms transactions at and beyond
		// the passed height, so add one to the new synced-to height to
		// prevent unconfirming transactions in the synced-to block.
		return w.TxStore.Rollback(txmgrNs, rollbackStamp.Height+1)
	})
	if err != nil {
		return err
	}

	// Request notifications for connected and disconnected blocks.
	//
	// TODO(jrick): Either request this notification only once, or when
	// rpcclient is modified to allow some notification request to not
	// automatically resent on reconnect, include the notifyblocks request
	// as well.  I am leaning towards allowing off all rpcclient
	// notification re-registrations, in which case the code here should be
	// left as is.
	if err := chainClient.NotifyBlocks(); err != nil {
		return err
	}

	// Finally, we'll trigger a wallet rescan and request notifications for
	// transactions sending to all wallet addresses and spending all wallet
	// UTXOs.
	var (
		addrs   []btcutil.Address
		unspent []wtxmgr.Credit
	)
	err = walletdb.Update(w.db, func(dbtx walletdb.ReadWriteTx) error {
		addrs, unspent, err = w.activeData(dbtx)
		return err
	})
	if err != nil {
		return err
	}

	return w.rescanWithTarget(addrs, unspent, nil)
}

// isDevEnv determines whether the wallet is currently under a local developer
// environment, e.g. simnet or regtest.
func (w *Wallet) isDevEnv() bool {
	switch uint32(w.ChainParams().Net) {
	case uint32(chaincfg.RegressionNetParams.Net):
	case uint32(chaincfg.SimNetParams.Net):
	default:
		return false
	}
	return true
}

// waitUntilBackendSynced blocks until the chain backend considers itself
// "current".
func (w *Wallet) waitUntilBackendSynced(chainClient chain.Interface) error {
	// We'll poll every second to determine if our chain considers itself
	// "current".
	t := time.NewTicker(time.Second)
	defer t.Stop()

	for {
		select {
		case <-t.C:
			if chainClient.IsCurrent() {
				return nil
			}
		case <-w.quitChan():
			return ErrWalletShuttingDown
		}
	}
}

// locateBirthdayBlock returns a block that meets the given birthday timestamp
// by a margin of +/-2 hours. This is safe to do as the timestamp is already 2
// days in the past of the actual timestamp.
func locateBirthdayBlock(chainClient chainConn,
	birthday time.Time) (*waddrmgr.BlockStamp, error) {

	// Retrieve the lookup range for our block.
	startHeight := int32(0)
	_, bestHeight, err := chainClient.GetBestBlock()
	if err != nil {
		return nil, err
	}

	log.Debugf("Locating suitable block for birthday %v between blocks "+
		"%v-%v", birthday, startHeight, bestHeight)

	var (
		birthdayBlock *waddrmgr.BlockStamp
		left, right   = startHeight, bestHeight
	)

	// Binary search for a block that meets the birthday timestamp by a
	// margin of +/-2 hours.
	for {
		// Retrieve the timestamp for the block halfway through our
		// range.
		mid := left + (right-left)/2
		hash, err := chainClient.GetBlockHash(int64(mid))
		if err != nil {
			return nil, err
		}
		header, err := chainClient.GetBlockHeader(hash)
		if err != nil {
			return nil, err
		}

		log.Debugf("Checking candidate block: height=%v, hash=%v, "+
			"timestamp=%v", mid, hash, header.Timestamp)

		// If the search happened to reach either of our range extremes,
		// then we'll just use that as there's nothing left to search.
		if mid == startHeight || mid == bestHeight || mid == left {
			birthdayBlock = &waddrmgr.BlockStamp{
				Hash:      *hash,
				Height:    mid,
				Timestamp: header.Timestamp,
			}
			break
		}

		// The block's timestamp is more than 2 hours after the
		// birthday, so look for a lower block.
		if header.Timestamp.Sub(birthday) > birthdayBlockDelta {
			right = mid
			continue
		}

		// The birthday is more than 2 hours before the block's
		// timestamp, so look for a higher block.
		if header.Timestamp.Sub(birthday) < -birthdayBlockDelta {
			left = mid
			continue
		}

		birthdayBlock = &waddrmgr.BlockStamp{
			Hash:      *hash,
			Height:    mid,
			Timestamp: header.Timestamp,
		}
		break
	}

	log.Debugf("Found birthday block: height=%d, hash=%v, timestamp=%v",
		birthdayBlock.Height, birthdayBlock.Hash,
		birthdayBlock.Timestamp)

	return birthdayBlock, nil
}

// recovery attempts to recover any unspent outputs that pay to any of our
// addresses starting from our birthday, or the wallet's tip (if higher), which
// would indicate resuming a recovery after a restart.
func (w *Wallet) recovery(chainClient chain.Interface,
	birthdayBlock *waddrmgr.BlockStamp) error {

	log.Infof("RECOVERY MODE ENABLED -- rescanning for used addresses "+
		"with recovery_window=%d", w.recoveryWindow)

	// We'll initialize the recovery manager with a default batch size of
	// 2000.
	recoveryMgr := NewRecoveryManager(
		w.recoveryWindow, recoveryBatchSize, w.chainParams,
	)

	scopedMgrs := make(map[waddrmgr.KeyScope]*waddrmgr.ScopedKeyManager)
	for _, scopedMgr := range w.Manager.ActiveScopedKeyManagers() {
		scopedMgrs[scopedMgr.Scope()] = scopedMgr
	}

	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		var credits []wtxmgr.Credit
		txMgrNS := tx.ReadBucket(wtxmgrNamespaceKey)
		credits, err := w.TxStore.UnspentOutputs(txMgrNS)
		if err != nil {
			return err
		}
		addrMgrNS := tx.ReadBucket(waddrmgrNamespaceKey)
		return recoveryMgr.Resurrect(addrMgrNS, scopedMgrs, credits)
	})
	if err != nil {
		return err
	}

	// Fetch the best height from the backend to determine when we should
	// stop.
	_, bestHeight, err := chainClient.GetBestBlock()
	if err != nil {
		return err
	}

	// Now we can begin scanning the chain from the wallet's current tip to
	// ensure we properly handle restarts. Since the recovery process itself
	// acts as rescan, we'll also update our wallet's synced state along the
	// way to reflect the blocks we process and prevent rescanning them
	// later on.
	//
	// NOTE: We purposefully don't update our best height since we assume
	// that a wallet rescan will be performed from the wallet's tip, which
	// will be of bestHeight after completing the recovery process.

	pass, err := prompt.ProvidePrivPassphrase()
	if err != nil {
		return err
	}

	err = w.Unlock(pass, nil)
	if err != nil {
		return err
	}
	defer w.Lock()

	var blocks []*waddrmgr.BlockStamp
	startHeight := w.Manager.SyncedTo().Height + 1
	for height := startHeight; height <= bestHeight; height++ {
		hash, err := chainClient.GetBlockHash(int64(height))
		if err != nil {
			return err
		}
		header, err := chainClient.GetBlockHeader(hash)
		if err != nil {
			return err
		}
		blocks = append(blocks, &waddrmgr.BlockStamp{
			Hash:      *hash,
			Height:    height,
			Timestamp: header.Timestamp,
		})

		// It's possible for us to run into blocks before our birthday
		// if our birthday is after our reorg safe height, so we'll make
		// sure to not add those to the batch.
		if height >= birthdayBlock.Height {
			recoveryMgr.AddToBlockBatch(
				hash, height, header.Timestamp,
			)
		}

		// We'll perform our recovery in batches of 2000 blocks.  It's
		// possible for us to reach our best height without exceeding
		// the recovery batch size, so we can proceed to commit our
		// state to disk.
		recoveryBatch := recoveryMgr.BlockBatch()
		if len(recoveryBatch) != recoveryBatchSize && height != bestHeight {
			continue
		}

		err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
			ns := tx.ReadWriteBucket(waddrmgrNamespaceKey)
			for _, block := range blocks {
				err = w.Manager.SetSyncedTo(ns, block)
				if err != nil {
					return err
				}
			}
			for scope, scopedMgr := range scopedMgrs {
				scopeState := recoveryMgr.State().StateForScope(scope)
				err = expandScopeHorizons(ns, scopedMgr, scopeState)
				if err != nil {
					return err
				}
			}
			return w.recoverScopedAddresses(chainClient, tx, ns,
				recoveryBatch, recoveryMgr.State(), scopedMgrs,
			)
		})
		if err != nil {
			return err
		}

		if len(recoveryBatch) > 0 {
			log.Infof("Recovered addresses from blocks "+
				"%d-%d", recoveryBatch[0].Height,
				recoveryBatch[len(recoveryBatch)-1].Height)
		}

		// Clear the batch of all processed blocks to reuse the
		// same memory for future batches.
		blocks = blocks[:0]
		recoveryMgr.ResetBlockBatch()
	}

	return nil
}

// recoverScopedAddresses scans a range of blocks in attempts to recover any
// previously used addresses for a particular account derivation path. At a high
// level, the algorithm works as follows:
//
//  1. Ensure internal and external branch horizons are fully expanded.
//  2. Filter the entire range of blocks, stopping if a non-zero number of
//     address are contained in a particular block.
//  3. Record all internal and external addresses found in the block.
//  4. Record any outpoints found in the block that should be watched for spends
//  5. Trim the range of blocks up to and including the one reporting the addrs.
//  6. Repeat from (1) if there are still more blocks in the range.
//
// TODO(conner): parallelize/pipeline/cache intermediate network requests
func (w *Wallet) recoverScopedAddresses(
	chainClient chain.Interface,
	tx walletdb.ReadWriteTx,
	ns walletdb.ReadWriteBucket,
	batch []wtxmgr.BlockMeta,
	recoveryState *RecoveryState,
	scopedMgrs map[waddrmgr.KeyScope]*waddrmgr.ScopedKeyManager) error {

	// If there are no blocks in the batch, we are done.
	if len(batch) == 0 {
		return nil
	}

expandHorizons:
	log.Infof("Scanning %d blocks for recoverable addresses", len(batch))

	// With the internal and external horizons properly expanded, we now
	// construct the filter blocks request. The request includes the range
	// of blocks we intend to scan, in addition to the scope-index -> addr
	// map for all internal and external branches.
	filterReq := newFilterBlocksRequest(batch, scopedMgrs, recoveryState)

	// Initiate the filter blocks request using our chain backend. If an
	// error occurs, we are unable to proceed with the recovery.
	filterResp, err := chainClient.FilterBlocks(filterReq)
	if err != nil {
		return err
	}

	// If the filter response is empty, this signals that the rest of the
	// batch was completed, and no other addresses were discovered. As a
	// result, no further modifications to our recovery state are required
	// and we can proceed to the next batch.
	if filterResp == nil {
		return nil
	}

	// Otherwise, retrieve the block info for the block that detected a
	// non-zero number of address matches.
	block := batch[filterResp.BatchIndex]

	// Log any non-trivial findings of addresses or outpoints.
	logFilterBlocksResp(block, filterResp)

	// Report any external or internal addresses found as a result of the
	// appropriate branch recovery state. Adding indexes above the
	// last-found index of either will result in the horizons being expanded
	// upon the next iteration. Any found addresses are also marked used
	// using the scoped key manager.
	err = extendFoundAddresses(ns, filterResp, scopedMgrs, recoveryState)
	if err != nil {
		return err
	}

	// Update the global set of watched outpoints with any that were found
	// in the block.
	for outPoint, addr := range filterResp.FoundOutPoints {
		outPoint := outPoint
		recoveryState.AddWatchedOutPoint(&outPoint, addr)
	}

	// Finally, record all of the relevant transactions that were returned
	// in the filter blocks response. This ensures that these transactions
	// and their outputs are tracked when the final rescan is performed.
	for _, txn := range filterResp.RelevantTxns {
		txRecord, err := wtxmgr.NewTxRecordFromMsgTx(
			txn, filterResp.BlockMeta.Time,
		)
		if err != nil {
			return err
		}

		err = w.addRelevantTx(tx, txRecord, &filterResp.BlockMeta)
		if err != nil {
			return err
		}
	}

	// Update the batch to indicate that we've processed all block through
	// the one that returned found addresses.
	batch = batch[filterResp.BatchIndex+1:]

	// If this was not the last block in the batch, we will repeat the
	// filtering process again after expanding our horizons.
	if len(batch) > 0 {
		goto expandHorizons
	}

	return nil
}

// expandScopeHorizons ensures that the ScopeRecoveryState has an adequately
// sized look ahead for both its internal and external branches. The keys
// derived here are added to the scope's recovery state, but do not affect the
// persistent state of the wallet. If any invalid child keys are detected, the
// horizon will be properly extended such that our lookahead always includes the
// proper number of valid child keys.
func expandScopeHorizons(
	ns walletdb.ReadWriteBucket,
	scopedMgr *waddrmgr.ScopedKeyManager,
	scopeState ScopeRecoveryState) error {

	for accountIndex, accountState := range scopeState {
		acctKey, err := scopedMgr.DeriveAccountKey(ns, uint32(accountIndex))
		if err != nil {
			return err
		}
		for branchIndex, branchState := range accountState {
			exHorizon, exWindow := branchState.ExtendHorizon()
			count, addrIndex := uint32(0), exHorizon

			branchKey, err := acctKey.Derive(uint32(branchIndex))
			if err != nil {
				return err
			}

			for count < exWindow {
				kp := keyPath(uint32(accountIndex), uint32(branchIndex), addrIndex)
				indexKey, err := branchKey.Derive(addrIndex)
				if err != nil {
					return err
				}
				addrType := waddrmgr.ScopeAddrMap[scopedMgr.Scope()].ExternalAddrType
				addr, err := scopedMgr.DeriveFromExtKeys(kp, indexKey, addrType)
				switch {
				case err == hdkeychain.ErrInvalidChild:
					branchState.MarkInvalidChild(addrIndex)
					addrIndex++
					continue

				case err != nil:
					return err
				}

				branchState.AddAddr(addrIndex, addr.Address())

				addrIndex++
				count++
			}
		}
	}

	return nil
}

// keyPath returns the relative derivation path /account/branch/index.
func keyPath(account, branch, index uint32) waddrmgr.DerivationPath {
	return waddrmgr.DerivationPath{
		InternalAccount: account,
		Account:         account,
		Branch:          branch,
		Index:           index,
	}
}

// newFilterBlocksRequest constructs FilterBlocksRequests using our current
// block range, scoped managers, and recovery state.
func newFilterBlocksRequest(batch []wtxmgr.BlockMeta,
	scopedMgrs map[waddrmgr.KeyScope]*waddrmgr.ScopedKeyManager,
	recoveryState *RecoveryState) *chain.FilterBlocksRequest {

	filterReq := &chain.FilterBlocksRequest{
		Blocks:           batch,
		Addresses:        make(map[waddrmgr.ScopedIndex]btcutil.Address),
		WatchedOutPoints: recoveryState.WatchedOutPoints(),
	}

	// Populate the addresses by merging the addresses sets belong to all
	// currently tracked scopes.
	for scope := range scopedMgrs {
		scopeState := recoveryState.StateForScope(scope)
		for accountIndex, accountState := range scopeState {
			for branchIndex, branchState := range accountState {
				for addrIndex, addr := range branchState.Addrs() {
					scopedIndex := waddrmgr.ScopedIndex{
						Scope:   scope,
						Account: uint32(accountIndex),
						Branch:  uint32(branchIndex),
						Index:   addrIndex,
					}
					filterReq.Addresses[scopedIndex] = addr
				}
			}
		}
	}

	return filterReq
}

// extendFoundAddresses accepts a filter blocks response that contains addresses
// found on chain, and advances the state of all relevant derivation paths to
// match the highest found child index for each branch.
func extendFoundAddresses(ns walletdb.ReadWriteBucket,
	filterResp *chain.FilterBlocksResponse,
	scopedMgrs map[waddrmgr.KeyScope]*waddrmgr.ScopedKeyManager,
	recoveryState *RecoveryState) error {

	// Mark all recovered addresses as used. This will be done only for
	// scopes that reported a non-zero number of addresses in this block.
	for index := range filterResp.FoundAddresses {
		scopedMgr := scopedMgrs[index.Scope]
		// First, report all child indexes found for this scope. This
		// ensures that the last-found index will be updated to include
		// the maximum child index seen thus far.
		scopeState := recoveryState.StateForScope(index.Scope)
		branchState := scopeState[index.Account][index.Branch]
		branchState.ReportFound(index.Index)
		// Now, with all found addresses reported, derive and extend all
		// external addresses up to and including the current last found
		// index for this scope.
		nextFound := branchState.NextUnfound()

		lastFound := nextFound
		if lastFound > 0 {
			lastFound--
		}

		err := scopedMgr.ExtendAddresses(
			ns, index.Account, index.Branch, lastFound,
		)
		if err != nil {
			return err
		}

		// Finally, with the scope's addresses extended, we mark used
		// the addresses that were found in the block and belong to
		// this scope.
		addr := branchState.GetAddr(index.Index)
		err = scopedMgr.MarkUsed(ns, addr)
		if err != nil {
			return err
		}
	}

	var lastAccount uint32
	for _, scopedMgr := range scopedMgrs {
		account, err := scopedMgr.LastAccount(ns)
		if err != nil {
			return err
		}
		if lastAccount < account {
			lastAccount = account
		}
	}

	// Make sure all scopes are extended to the same account.
	for _, s := range scopedMgrs {
		for gapAccount := lastAccount; gapAccount >= 0; gapAccount-- {
			_, err := s.AccountProperties(ns, gapAccount)
			// If the account exists, we can stop extending.
			if err == nil {
				break
			}
			err = s.NewRawAccount(ns, gapAccount)
			if err != nil {
				return err
			}
		}
	}

	return nil
}

// logFilterBlocksResp provides useful logging information when filtering
// succeeded in finding relevant transactions.
func logFilterBlocksResp(block wtxmgr.BlockMeta,
	resp *chain.FilterBlocksResponse) {

	// Log the number of external addresses found in this block.
	var nFoundAddresses int
	nFoundAddresses += len(resp.FoundAddresses)

	if nFoundAddresses > 0 {
		log.Infof("Recovered %d addrs at height=%d hash=%v",
			nFoundAddresses, block.Height, block.Hash)
	}

	// Log the number of outpoints found in this block.
	nFoundOutPoints := len(resp.FoundOutPoints)
	if nFoundOutPoints > 0 {
		log.Infof("Found %d spends from watched outpoints at "+
			"height=%d hash=%v",
			nFoundOutPoints, block.Height, block.Hash)
	}
}

type (
	createTxRequest struct {
		keyScope              *waddrmgr.KeyScope
		account               uint32
		outputs               []*wire.TxOut
		minconf               int32
		feeSatPerKB           btcutil.Amount
		coinSelectionStrategy CoinSelectionStrategy
		dryRun                bool
		resp                  chan createTxResponse
	}
	createTxResponse struct {
		tx  *txauthor.AuthoredTx
		err error
	}
)

// txCreator is responsible for the input selection and creation of
// transactions.  These functions are the responsibility of this method
// (designed to be run as its own goroutine) since input selection must be
// serialized, or else it is possible to create double spends by choosing the
// same inputs for multiple transactions.  Along with input selection, this
// method is also responsible for the signing of transactions, since we don't
// want to end up in a situation where we run out of inputs as multiple
// transactions are being created.  In this situation, it would then be possible
// for both requests, rather than just one, to fail due to not enough available
// inputs.
func (w *Wallet) txCreator() {
	quit := w.quitChan()
out:
	for {
		select {
		case txr := <-w.createTxRequests:
			// If the wallet can be locked because it contains
			// private key material, we need to prevent it from
			// doing so while we are assembling the transaction.
			release := func() {}
			heldUnlock, err := w.holdUnlock()
			if err != nil {
				txr.resp <- createTxResponse{nil, err}
				continue
			}

			release = heldUnlock.release

			tx, err := w.txToOutputs(
				txr.outputs, txr.keyScope, txr.account,
				txr.minconf, txr.feeSatPerKB,
				txr.coinSelectionStrategy, txr.dryRun,
			)

			release()
			txr.resp <- createTxResponse{tx, err}
		case <-quit:
			break out
		}
	}
	w.wg.Done()
}

// CreateSimpleTx creates a new signed transaction spending unspent outputs with
// at least minconf confirmations spending to any number of address/amount
// pairs. Only unspent outputs belonging to the given key scope and account will
// be selected, unless a key scope is not specified. In that case, inputs from all
// accounts may be selected, no matter what key scope they belong to. This is
// done to handle the default account case, where a user wants to fund a PSBT
// with inputs regardless of their type (NP2WKH, P2WKH, etc.). Change and an
// appropriate transaction fee are automatically included, if necessary. All
// transaction creation through this function is serialized to prevent the
// creation of many transactions which spend the same outputs.
//
// NOTE: The dryRun argument can be set true to create a tx that doesn't alter
// the database. A tx created with this set to true SHOULD NOT be broadcasted.
func (w *Wallet) CreateSimpleTx(keyScope *waddrmgr.KeyScope, account uint32,
	outputs []*wire.TxOut, minconf int32, satPerKb btcutil.Amount,
	coinSelectionStrategy CoinSelectionStrategy, dryRun bool) (
	*txauthor.AuthoredTx, error) {

	req := createTxRequest{
		keyScope:              keyScope,
		account:               account,
		outputs:               outputs,
		minconf:               minconf,
		feeSatPerKB:           satPerKb,
		coinSelectionStrategy: coinSelectionStrategy,
		dryRun:                dryRun,
		resp:                  make(chan createTxResponse),
	}
	w.createTxRequests <- req
	resp := <-req.resp
	return resp.tx, resp.err
}

type (
	unlockRequest struct {
		passphrase []byte
		lockAfter  <-chan time.Time // nil prevents the timeout.
		err        chan error
	}

	changePassphraseRequest struct {
		old, new []byte
		private  bool
		err      chan error
	}

	changePassphrasesRequest struct {
		publicOld, publicNew   []byte
		privateOld, privateNew []byte
		err                    chan error
	}

	// heldUnlock is a tool to prevent the wallet from automatically
	// locking after some timeout before an operation which needed
	// the unlocked wallet has finished.  Any acquired heldUnlock
	// *must* be released (preferably with a defer) or the wallet
	// will forever remain unlocked.
	heldUnlock chan struct{}
)

// walletLocker manages the locked/unlocked state of a wallet.
func (w *Wallet) walletLocker() {
	var timeout <-chan time.Time
	holdChan := make(heldUnlock)
	quit := w.quitChan()
out:
	for {
		select {
		case req := <-w.unlockRequests:
			err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
				addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
				return w.Manager.Unlock(addrmgrNs, req.passphrase)
			})
			if err != nil {
				req.err <- err
				continue
			}
			timeout = req.lockAfter
			if timeout == nil {
				log.Info("The wallet has been unlocked without a time limit")
			} else {
				log.Info("The wallet has been temporarily unlocked")
			}
			req.err <- nil
			continue

		case req := <-w.changePassphrase:
			err := walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
				addrmgrNs := tx.ReadWriteBucket(waddrmgrNamespaceKey)
				return w.Manager.ChangePassphrase(
					addrmgrNs, req.old, req.new, req.private,
					&waddrmgr.DefaultScryptOptions,
				)
			})
			req.err <- err
			continue

		case req := <-w.changePassphrases:
			err := walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
				addrmgrNs := tx.ReadWriteBucket(waddrmgrNamespaceKey)
				err := w.Manager.ChangePassphrase(
					addrmgrNs, req.publicOld, req.publicNew,
					false, &waddrmgr.DefaultScryptOptions,
				)
				if err != nil {
					return err
				}

				return w.Manager.ChangePassphrase(
					addrmgrNs, req.privateOld, req.privateNew,
					true, &waddrmgr.DefaultScryptOptions,
				)
			})
			req.err <- err
			continue

		case req := <-w.holdUnlockRequests:
			if w.Manager.IsLocked() {
				close(req)
				continue
			}

			req <- holdChan
			<-holdChan // Block until the lock is released.

			// If, after holding onto the unlocked wallet for some
			// time, the timeout has expired, lock it now instead
			// of hoping it gets unlocked next time the top level
			// select runs.
			select {
			case <-timeout:
				// Let the top level select fallthrough so the
				// wallet is locked.
			default:
				continue
			}

		case w.lockState <- w.Manager.IsLocked():
			continue

		case <-quit:
			break out

		case <-w.lockRequests:
		case <-timeout:
		}

		// Select statement fell through by an explicit lock or the
		// timer expiring.  Lock the manager here.
		timeout = nil
		err := w.Manager.Lock()
		if err != nil && !waddrmgr.IsError(err, waddrmgr.ErrLocked) {
			log.Errorf("Could not lock wallet: %v", err)
		} else {
			log.Info("The wallet has been locked")
		}
	}
	w.wg.Done()
}

// Unlock unlocks the wallet's address manager and relocks it after timeout has
// expired.  If the wallet is already unlocked and the new passphrase is
// correct, the current timeout is replaced with the new one.  The wallet will
// be locked if the passphrase is incorrect or any other error occurs during the
// unlock.
func (w *Wallet) Unlock(passphrase []byte, lock <-chan time.Time) error {
	err := make(chan error, 1)
	w.unlockRequests <- unlockRequest{
		passphrase: passphrase,
		lockAfter:  lock,
		err:        err,
	}
	return <-err
}

// Lock locks the wallet's address manager.
func (w *Wallet) Lock() {
	select {
	case <-w.quitChan():
	case w.lockRequests <- struct{}{}:
	}
}

// Locked returns whether the account manager for a wallet is locked.
func (w *Wallet) Locked() bool {
	return <-w.lockState
}

// holdUnlock prevents the wallet from being locked.  The heldUnlock object
// *must* be released, or the wallet will forever remain unlocked.
//
// TODO: To prevent the above scenario, perhaps closures should be passed
// to the walletLocker goroutine and disallow callers from explicitly
// handling the locking mechanism.
func (w *Wallet) holdUnlock() (heldUnlock, error) {
	req := make(chan heldUnlock)
	w.holdUnlockRequests <- req
	hl, ok := <-req
	if !ok {
		// TODO(davec): This should be defined and exported from
		// waddrmgr.
		return nil, waddrmgr.ManagerError{
			ErrorCode:   waddrmgr.ErrLocked,
			Description: "address manager is locked",
		}
	}
	return hl, nil
}

// release releases the hold on the unlocked-state of the wallet and allows the
// wallet to be locked again.  If a lock timeout has already expired, the
// wallet is locked again as soon as release is called.
func (c heldUnlock) release() {
	c <- struct{}{}
}

// ChangePrivatePassphrase attempts to change the passphrase for a wallet from
// old to new.  Changing the passphrase is synchronized with all other address
// manager locking and unlocking.  The lock state will be the same as it was
// before the password change.
func (w *Wallet) ChangePrivatePassphrase(old, new []byte) error {
	err := make(chan error, 1)
	w.changePassphrase <- changePassphraseRequest{
		old:     old,
		new:     new,
		private: true,
		err:     err,
	}
	return <-err
}

// ChangePublicPassphrase modifies the public passphrase of the wallet.
func (w *Wallet) ChangePublicPassphrase(old, new []byte) error {
	err := make(chan error, 1)
	w.changePassphrase <- changePassphraseRequest{
		old:     old,
		new:     new,
		private: false,
		err:     err,
	}
	return <-err
}

// ChangePassphrases modifies the public and private passphrase of the wallet
// atomically.
func (w *Wallet) ChangePassphrases(publicOld, publicNew, privateOld,
	privateNew []byte) error {

	err := make(chan error, 1)
	w.changePassphrases <- changePassphrasesRequest{
		publicOld:  publicOld,
		publicNew:  publicNew,
		privateOld: privateOld,
		privateNew: privateNew,
		err:        err,
	}
	return <-err
}

// AccountAddresses returns the addresses for every created address for an
// account.
func (w *Wallet) AccountAddresses(account uint32, scope *waddrmgr.KeyScope) (
	addrs []btcutil.Address, err error) {

	// By default, append all addresses under this account.
	fn := func(maddr waddrmgr.ManagedAddress) error {
		addrs = append(addrs, maddr.Address())
		return nil
	}

	// If scope is set, append only those have the address type under
	// this scope.
	if scope != nil {
		addrSchema := waddrmgr.ScopeAddrMap[*scope]

		fn = func(maddr waddrmgr.ManagedAddress) error {
			if maddr.AddrType() == addrSchema.InternalAddrType ||
				maddr.AddrType() == addrSchema.ExternalAddrType {
				addrs = append(addrs, maddr.Address())
			}
			return nil
		}
	}

	err = walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		return w.Manager.ForEachAccountAddress(addrmgrNs, account, fn)
	})
	return
}

// CalculateBalance sums the amounts of all unspent transaction
// outputs to addresses of a wallet and returns the balance.
//
// If confirmations is 0, all UTXOs, even those not present in a
// block (height -1), will be used to get the balance.  Otherwise,
// a UTXO must be in a block.  If confirmations is 1 or greater,
// the balance will be calculated based on how many how many blocks
// include a UTXO.
func (w *Wallet) CalculateBalance(confirms int32) (btcutil.Amount, btcutil.Amount, error) {
	var balance btcutil.Amount
	var staked btcutil.Amount
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)
		var err error
		blk := w.Manager.SyncedTo()
		balance, staked, err = w.TxStore.Balance(txmgrNs, confirms, blk.Height)
		return err
	})
	return balance, staked, err
}

// Balances records total, spendable (by policy), and immature coinbase
// reward balance amounts.
type Balances struct {
	Total          btcutil.Amount
	Spendable      btcutil.Amount
	ImmatureReward btcutil.Amount
}

// CalculateAccountBalances sums the amounts of all unspent transaction
// outputs to the given account of a wallet and returns the balance.
//
// This function is much slower than it needs to be since transactions outputs
// are not indexed by the accounts they credit to, and all unspent transaction
// outputs must be iterated.
func (w *Wallet) CalculateAccountBalances(account uint32, confirms int32) (Balances, error) {
	var bals Balances
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		// Get current block.  The block height used for calculating
		// the number of tx confirmations.
		syncBlock := w.Manager.SyncedTo()

		unspent, err := w.TxStore.UnspentOutputs(txmgrNs)
		if err != nil {
			return err
		}
		for i := range unspent {
			output := &unspent[i]

			var outputAcct uint32
			_, addrs, _, err := txscript.ExtractPkScriptAddrs(
				output.PkScript, w.chainParams)
			if err == nil && len(addrs) > 0 {
				_, outputAcct, err = w.Manager.AddrAccount(addrmgrNs, addrs[0])
			}
			if err != nil || outputAcct != account || isStake(output.PkScript) {
				continue
			}

			bals.Total += output.Amount
			if output.FromCoinBase && !confirmed(int32(w.chainParams.CoinbaseMaturity),
				output.Height, syncBlock.Height) {
				bals.ImmatureReward += output.Amount
			} else if confirmed(confirms, output.Height, syncBlock.Height) {
				bals.Spendable += output.Amount
			}
		}
		return nil
	})
	return bals, err
}

// CurrentAddress gets the most recently requested Bitcoin payment address
// from a wallet for a particular key-chain scope.  If the address has already
// been used (there is at least one transaction spending to it in the
// blockchain or lbcd mempool), the next chained address is returned.
func (w *Wallet) CurrentAddress(account uint32, scope waddrmgr.KeyScope) (btcutil.Address, error) {
	chainClient, err := w.requireChainClient()
	if err != nil {
		return nil, err
	}

	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return nil, err
	}

	var (
		addr  btcutil.Address
		props *waddrmgr.AccountProperties
	)
	err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
		addrmgrNs := tx.ReadWriteBucket(waddrmgrNamespaceKey)
		maddr, err := manager.LastAddress(addrmgrNs, account, waddrmgr.ExternalBranch)
		if err != nil {
			// If no address exists yet, create the first external
			// address.
			if waddrmgr.IsError(err, waddrmgr.ErrAddressNotFound) {
				addr, props, err = w.newAddress(
					addrmgrNs, account, scope,
				)
			}
			return err
		}

		// Get next chained address if the last one has already been
		// used.
		if maddr.Used(addrmgrNs) {
			addr, props, err = w.newAddress(
				addrmgrNs, account, scope,
			)
			return err
		}

		addr = maddr.Address()
		return nil
	})
	if err != nil {
		return nil, err
	}

	// If the props have been initially, then we had to create a new address
	// to satisfy the query. Notify the rpc server about the new address.
	if props != nil {
		err = chainClient.NotifyReceived([]btcutil.Address{addr})
		if err != nil {
			return nil, err
		}

		w.NtfnServer.notifyAccountProperties(props)
	}

	return addr, nil
}

// PubKeyForAddress looks up the associated public key for a P2PKH address.
func (w *Wallet) PubKeyForAddress(a btcutil.Address) (*btcec.PublicKey, error) {
	var pubKey *btcec.PublicKey
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		managedAddr, err := w.Manager.Address(addrmgrNs, a)
		if err != nil {
			return err
		}
		managedPubKeyAddr, ok := managedAddr.(waddrmgr.ManagedPubKeyAddress)
		if !ok {
			return errors.New("address does not have an associated public key")
		}
		pubKey = managedPubKeyAddr.PubKey()
		return nil
	})
	return pubKey, err
}

// LabelTransaction adds a label to the transaction with the hash provided. The
// call will fail if the label is too long, or if the transaction already has
// a label and the overwrite boolean is not set.
func (w *Wallet) LabelTransaction(hash chainhash.Hash, label string,
	overwrite bool) error {

	// Check that the transaction is known to the wallet, and fail if it is
	// unknown. If the transaction is known, check whether it already has
	// a label.
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		dbTx, err := w.TxStore.TxDetails(txmgrNs, &hash)
		if err != nil {
			return err
		}

		// If the transaction looked up is nil, it was not found. We
		// do not allow labelling of unknown transactions so we fail.
		if dbTx == nil {
			return ErrUnknownTransaction
		}

		_, err = wtxmgr.FetchTxLabel(txmgrNs, hash)
		return err
	})

	switch err {
	// If no labels have been written yet, we can silence the error.
	// Likewise if there is no label, we do not need to do any overwrite
	// checks.
	case wtxmgr.ErrNoLabelBucket:
	case wtxmgr.ErrTxLabelNotFound:

	// If we successfully looked up a label, fail if the overwrite param
	// is not set.
	case nil:
		if !overwrite {
			return ErrTxLabelExists
		}

	// In another unrelated error occurred, return it.
	default:
		return err
	}

	return walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
		txmgrNs := tx.ReadWriteBucket(wtxmgrNamespaceKey)
		return w.TxStore.PutTxLabel(txmgrNs, hash, label)
	})
}

// PrivKeyForAddress looks up the associated private key for a P2PKH or P2PK
// address.
func (w *Wallet) PrivKeyForAddress(a btcutil.Address) (*btcec.PrivateKey, error) {
	var privKey *btcec.PrivateKey
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		managedAddr, err := w.Manager.Address(addrmgrNs, a)
		if err != nil {
			return err
		}
		managedPubKeyAddr, ok := managedAddr.(waddrmgr.ManagedPubKeyAddress)
		if !ok {
			return errors.New("address does not have an associated private key")
		}
		privKey, err = managedPubKeyAddr.PrivKey()
		return err
	})
	return privKey, err
}

// HaveAddress returns whether the wallet is the owner of the address a.
func (w *Wallet) HaveAddress(a btcutil.Address) (bool, error) {
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		_, err := w.Manager.Address(addrmgrNs, a)
		return err
	})
	if err == nil {
		return true, nil
	}
	if waddrmgr.IsError(err, waddrmgr.ErrAddressNotFound) {
		return false, nil
	}
	return false, err
}

// AccountOfAddress finds the account that an address is associated with.
func (w *Wallet) AccountOfAddress(a btcutil.Address) (uint32, error) {
	var account uint32
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		var err error
		_, account, err = w.Manager.AddrAccount(addrmgrNs, a)
		return err
	})
	return account, err
}

// AddressInfo returns detailed information regarding a wallet address.
func (w *Wallet) AddressInfo(a btcutil.Address) (waddrmgr.ManagedAddress, error) {
	var managedAddress waddrmgr.ManagedAddress
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		var err error
		managedAddress, err = w.Manager.Address(addrmgrNs, a)
		return err
	})
	return managedAddress, err
}

// AccountNumber returns the account number for an account name under a
// particular key scope.
func (w *Wallet) AccountNumber(accountName string) (uint32, error) {
	// By design, the same account number is shared across all scopes.
	return w.accountNumber(waddrmgr.DefaultKeyScope, accountName)
}

func (w *Wallet) accountNumber(scope waddrmgr.KeyScope, accountName string) (uint32, error) {
	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return 0, err
	}

	var account uint32
	err = walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		account, err = manager.LookupAccount(addrmgrNs, accountName)
		return err
	})
	return account, err
}

// AccountName returns the name of an account.
func (w *Wallet) AccountName(accountNumber uint32) (string, error) {
	// By design, the same account name is shared across all scopes.
	return w.accountName(waddrmgr.DefaultKeyScope, accountNumber)
}

func (w *Wallet) accountName(scope waddrmgr.KeyScope, accountNumber uint32) (string, error) {
	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return "", err
	}

	var accountName string
	err = walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		accountName, err = manager.AccountName(addrmgrNs, accountNumber)
		return err
	})
	return accountName, err
}

// AccountProperties returns the properties of an account, including address
// indexes and name. It first fetches the desynced information from the address
// manager, then updates the indexes based on the address pools.
func (w *Wallet) AccountProperties(scope waddrmgr.KeyScope, acct uint32) (*waddrmgr.AccountProperties, error) {
	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return nil, err
	}

	var props *waddrmgr.AccountProperties
	err = walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		waddrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		var err error
		props, err = manager.AccountProperties(waddrmgrNs, acct)
		return err
	})
	return props, err
}

// AccountPropertiesByName returns the properties of an account by its name. It
// first fetches the desynced information from the address manager, then updates
// the indexes based on the address pools.
func (w *Wallet) AccountPropertiesByName(scope waddrmgr.KeyScope,
	name string) (*waddrmgr.AccountProperties, error) {

	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return nil, err
	}

	var props *waddrmgr.AccountProperties
	err = walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		waddrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		acct, err := manager.LookupAccount(waddrmgrNs, name)
		if err != nil {
			return err
		}
		props, err = manager.AccountProperties(waddrmgrNs, acct)
		return err
	})
	return props, err
}

// LookupAccount returns the corresponding key scope and account number for the
// account with the given name.
func (w *Wallet) LookupAccount(name string) (waddrmgr.KeyScope, uint32, error) {
	var (
		keyScope waddrmgr.KeyScope
		account  uint32
	)
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		ns := tx.ReadBucket(waddrmgrNamespaceKey)
		var err error
		keyScope, account, err = w.Manager.LookupAccount(ns, name)
		return err
	})
	return keyScope, account, err
}

// RenameAccount sets the name for an account number to newName.
func (w *Wallet) RenameAccount(scope waddrmgr.KeyScope, account uint32, newName string) error {
	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return err
	}

	var props *waddrmgr.AccountProperties
	err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
		addrmgrNs := tx.ReadWriteBucket(waddrmgrNamespaceKey)
		err := manager.RenameAccount(addrmgrNs, account, newName)
		if err != nil {
			return err
		}
		props, err = manager.AccountProperties(addrmgrNs, account)
		return err
	})
	if err == nil {
		w.NtfnServer.notifyAccountProperties(props)
	}
	return err
}

// NextAccount creates the next account and returns its account number.  The
// name must be unique to the account.  In order to support automatic seed
// restoring, new accounts may not be created when all of the previous 100
// accounts have no transaction history (this is a deviation from the BIP0044
// spec, which allows no unused account gaps).
func (w *Wallet) NextAccount(scope waddrmgr.KeyScope, name string) (uint32, error) {
	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return 0, err
	}

	var (
		account uint32
		props   *waddrmgr.AccountProperties
	)
	err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
		addrmgrNs := tx.ReadWriteBucket(waddrmgrNamespaceKey)
		var err error
		account, err = manager.NewAccount(addrmgrNs, name)
		if err != nil {
			return err
		}
		props, err = manager.AccountProperties(addrmgrNs, account)
		return err
	})
	if err != nil {
		log.Errorf("Cannot fetch new account properties for notification "+
			"after account creation: %v", err)
	} else {
		w.NtfnServer.notifyAccountProperties(props)
	}
	return account, err
}

// CreditCategory describes the type of wallet transaction output.  The category
// of "sent transactions" (debits) is always "send", and is not expressed by
// this type.
//
// TODO: This is a requirement of the RPC server and should be moved.
type CreditCategory byte

// These constants define the possible credit categories.
const (
	CreditReceive CreditCategory = iota
	CreditGenerate
	CreditImmature
)

// String returns the category as a string.  This string may be used as the
// JSON string for categories as part of listtransactions and gettransaction
// RPC responses.
func (c CreditCategory) String() string {
	switch c {
	case CreditReceive:
		return "receive"
	case CreditGenerate:
		return "generate"
	case CreditImmature:
		return "immature"
	default:
		return "unknown"
	}
}

// RecvCategory returns the category of received credit outputs from a
// transaction record.  The passed block chain height is used to distinguish
// immature from mature coinbase outputs.
//
// TODO: This is intended for use by the RPC server and should be moved out of
// this package at a later time.
func RecvCategory(details *wtxmgr.TxDetails, syncHeight int32, net *chaincfg.Params) CreditCategory {
	if blockchain.IsCoinBaseTx(&details.MsgTx) {
		if confirmed(int32(net.CoinbaseMaturity), details.Block.Height,
			syncHeight) {
			return CreditGenerate
		}
		return CreditImmature
	}
	return CreditReceive
}

// listTransactions creates a object that may be marshalled to a response result
// for a listtransactions RPC.
//
// TODO: This should be moved to the legacyrpc package.
func listTransactions(accountName string, tx walletdb.ReadTx,
	details *wtxmgr.TxDetails, addrMgr *waddrmgr.Manager,
	syncHeight int32, net *chaincfg.Params) []btcjson.ListTransactionsResult {

	addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)

	var (
		blockHashStr  string
		blockTime     int64
		confirmations int64
	)
	if details.Block.Height != -1 {
		blockHashStr = details.Block.Hash.String()
		blockTime = details.Block.Time.Unix()
		confirmations = int64(confirms(details.Block.Height, syncHeight))
	}

	results := []btcjson.ListTransactionsResult{}
	txHashStr := details.Hash.String()
	received := details.Received.Unix()
	generated := blockchain.IsCoinBaseTx(&details.MsgTx)
	recvCat := RecvCategory(details, syncHeight, net).String()

	send := len(details.Debits) != 0

	// Fee can only be determined if every input is a debit.
	var feeF64 float64
	if len(details.Debits) == len(details.MsgTx.TxIn) {
		var debitTotal btcutil.Amount
		for _, deb := range details.Debits {
			debitTotal += deb.Amount
		}
		var outputTotal btcutil.Amount
		for _, output := range details.MsgTx.TxOut {
			outputTotal += btcutil.Amount(output.Value)
		}
		// Note: The actual fee is debitTotal - outputTotal.  However,
		// this RPC reports negative numbers for fees, so the inverse
		// is calculated.
		feeF64 = (outputTotal - debitTotal).ToBTC()
	}

outputs:
	for i, output := range details.MsgTx.TxOut {
		// Determine if this output is a credit, and if so, determine
		// its spentness.
		var isCredit bool
		var spentCredit bool
		for _, cred := range details.Credits {
			if cred.Index == uint32(i) {
				// Change outputs are ignored.
				if cred.Change {
					continue outputs
				}

				isCredit = true
				spentCredit = cred.Spent
				break
			}
		}

		var address string
		var name string
		_, addrs, _, _ := txscript.ExtractPkScriptAddrs(output.PkScript, net)
		if len(addrs) == 1 {
			addr := addrs[0]
			address = addr.EncodeAddress()
			mgr, account, err := addrMgr.AddrAccount(addrmgrNs, addrs[0])
			if err == nil {
				name, err = mgr.AccountName(addrmgrNs, account)
				if err != nil {
					name = ""
				}
			}
		}
		if accountName != "*" && accountName != name {
			continue
		}

		amountF64 := btcutil.Amount(output.Value).ToBTC()
		result := btcjson.ListTransactionsResult{
			// Fields left zeroed:
			//   InvolvesWatchOnly
			//   BlockIndex
			//
			// Fields set below:
			//   Account
			//   Category
			//   Amount
			//   Fee
			Address:         address,
			Vout:            uint32(i),
			Confirmations:   confirmations,
			Generated:       generated,
			BlockHash:       blockHashStr,
			BlockTime:       blockTime,
			TxID:            txHashStr,
			WalletConflicts: []string{},
			Time:            received,
			TimeReceived:    received,
		}

		// Add a received/generated/immature result if this is a credit.
		// If the output was spent, create a second result under the
		// send category with the inverse of the output amount.  It is
		// therefore possible that a single output may be included in
		// the results set zero, one, or two times.
		//
		// Since credits are not saved for outputs that are not
		// controlled by this wallet, all non-credits from transactions
		// with debits are grouped under the send category.

		if send || spentCredit {
			result.Account = name
			result.Category = "send"
			result.Amount = -amountF64
			result.Fee = &feeF64
			results = append(results, result)
		}
		if isCredit {
			result.Account = name
			result.Category = recvCat
			result.Amount = amountF64
			result.Fee = nil
			results = append(results, result)
		}
	}
	return results
}

// ListSinceBlock returns a slice of objects with details about transactions
// since the given block. If the block is -1 then all transactions are included.
// This is intended to be used for listsinceblock RPC replies.
func (w *Wallet) ListSinceBlock(accountName string, start, end, syncHeight int32) ([]btcjson.ListTransactionsResult, error) {
	txList := []btcjson.ListTransactionsResult{}
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		rangeFn := func(details []wtxmgr.TxDetails) (bool, error) {
			for _, detail := range details {
				detail := detail

				jsonResults := listTransactions(
					accountName, tx, &detail, w.Manager,
					syncHeight, w.chainParams,
				)
				txList = append(txList, jsonResults...)
			}
			return false, nil
		}

		return w.TxStore.RangeTransactions(txmgrNs, start, end, rangeFn)
	})
	return txList, err
}

// ListTransactions returns a slice of objects with details about a recorded
// transaction.  This is intended to be used for listtransactions RPC
// replies.
func (w *Wallet) ListTransactions(accountName string, from, count int) ([]btcjson.ListTransactionsResult, error) {
	txList := []btcjson.ListTransactionsResult{}

	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		// Get current block.  The block height used for calculating
		// the number of tx confirmations.
		syncBlock := w.Manager.SyncedTo()

		// Need to skip the first from transactions, and after those, only
		// include the next count transactions.
		skipped := 0
		rangeFn := func(details []wtxmgr.TxDetails) (bool, error) {

			for _, detail := range details {
				if from > skipped {
					skipped++
					continue
				}

				if len(txList) >= count {
					txList = txList[:count]
					return true, nil
				}

				jsonResults := listTransactions(accountName,
					tx, &detail, w.Manager,
					syncBlock.Height, w.chainParams)

				txList = append(txList, jsonResults...)
			}

			return false, nil
		}

		// Return newer results first by starting at mempool height and working
		// down to the genesis block.
		return w.TxStore.RangeTransactions(txmgrNs, -1, 0, rangeFn)
	})

	for i, j := 0, len(txList)-1; i < j; i, j = i+1, j-1 {
		txList[i], txList[j] = txList[j], txList[i]
	}

	return txList, err
}

// ListAddressTransactions returns a slice of objects with details about
// recorded transactions to or from any address belonging to a set.  This is
// intended to be used for listaddresstransactions RPC replies.
func (w *Wallet) ListAddressTransactions(pkHashes map[string]struct{}) ([]btcjson.ListTransactionsResult, error) {
	txList := []btcjson.ListTransactionsResult{}
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		// Get current block.  The block height used for calculating
		// the number of tx confirmations.
		syncBlock := w.Manager.SyncedTo()
		rangeFn := func(details []wtxmgr.TxDetails) (bool, error) {
		loopDetails:
			for i := range details {
				detail := &details[i]

				for _, cred := range detail.Credits {
					pkScript := detail.MsgTx.TxOut[cred.Index].PkScript
					_, addrs, _, err := txscript.ExtractPkScriptAddrs(
						pkScript, w.chainParams)
					if err != nil || len(addrs) != 1 {
						continue
					}
					apkh, ok := addrs[0].(*btcutil.AddressPubKeyHash)
					if !ok {
						continue
					}
					_, ok = pkHashes[string(apkh.ScriptAddress())]
					if !ok {
						continue
					}

					jsonResults := listTransactions(tx, detail,
						w.Manager, syncBlock.Height, w.chainParams)
					txList = append(txList, jsonResults...)
					continue loopDetails
				}
			}
			return false, nil
		}

		return w.TxStore.RangeTransactions(txmgrNs, 0, -1, rangeFn)
	})
	return txList, err
}

// ListAllTransactions returns a slice of objects with details about a recorded
// transaction.  This is intended to be used for listalltransactions RPC
// replies.
func (w *Wallet) ListAllTransactions(accountName string) ([]btcjson.ListTransactionsResult, error) {
	txList := []btcjson.ListTransactionsResult{}
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		// Get current block.  The block height used for calculating
		// the number of tx confirmations.
		syncBlock := w.Manager.SyncedTo()

		rangeFn := func(details []wtxmgr.TxDetails) (bool, error) {
			// Iterate over transactions at this height in reverse order.
			// This does nothing for unmined transactions, which are
			// unsorted, but it will process mined transactions in the
			// reverse order they were marked mined.
			for i := len(details) - 1; i >= 0; i-- {
				jsonResults := listTransactions(accountName,
					tx, &details[i], w.Manager,
					syncBlock.Height, w.chainParams)
				txList = append(txList, jsonResults...)
			}
			return false, nil
		}

		// Return newer results first by starting at mempool height and
		// working down to the genesis block.
		return w.TxStore.RangeTransactions(txmgrNs, -1, 0, rangeFn)
	})
	return txList, err
}

// BlockIdentifier identifies a block by either a height or a hash.
type BlockIdentifier struct {
	height int32
	hash   *chainhash.Hash
}

// NewBlockIdentifierFromHeight constructs a BlockIdentifier for a block height.
func NewBlockIdentifierFromHeight(height int32) *BlockIdentifier {
	return &BlockIdentifier{height: height}
}

// NewBlockIdentifierFromHash constructs a BlockIdentifier for a block hash.
func NewBlockIdentifierFromHash(hash *chainhash.Hash) *BlockIdentifier {
	return &BlockIdentifier{hash: hash}
}

// GetTransactionsResult is the result of the wallet's GetTransactions method.
// See GetTransactions for more details.
type GetTransactionsResult struct {
	MinedTransactions   []Block
	UnminedTransactions []TransactionSummary
}

// GetTransactions returns transaction results between a starting and ending
// block.  Blocks in the block range may be specified by either a height or a
// hash.
//
// Because this is a possibly lenghtly operation, a cancel channel is provided
// to cancel the task.  If this channel unblocks, the results created thus far
// will be returned.
//
// Transaction results are organized by blocks in ascending order and unmined
// transactions in an unspecified order.  Mined transactions are saved in a
// Block structure which records properties about the block.
func (w *Wallet) GetTransactions(startBlock, endBlock *BlockIdentifier,
	accountName string, cancel <-chan struct{}) (*GetTransactionsResult, error) {

	var start, end int32 = 0, -1

	w.chainClientLock.Lock()
	chainClient := w.chainClient
	w.chainClientLock.Unlock()

	// TODO: Fetching block heights by their hashes is inherently racy
	// because not all block headers are saved but when they are for SPV the
	// db can be queried directly without this.
	if startBlock != nil {
		if startBlock.hash == nil {
			start = startBlock.height
		} else {
			if chainClient == nil {
				return nil, errors.New("no chain server client")
			}
			switch client := chainClient.(type) {
			case *chain.RPCClient:
				startHeader, err := client.GetBlockHeaderVerbose(
					startBlock.hash,
				)
				if err != nil {
					return nil, err
				}
				start = startHeader.Height
			}
		}
	}
	if endBlock != nil {
		if endBlock.hash == nil {
			end = endBlock.height
		} else {
			if chainClient == nil {
				return nil, errors.New("no chain server client")
			}
			switch client := chainClient.(type) {
			case *chain.RPCClient:
				endHeader, err := client.GetBlockHeaderVerbose(
					endBlock.hash,
				)
				if err != nil {
					return nil, err
				}
				end = endHeader.Height
			}
		}
	}

	var res GetTransactionsResult
	err := walletdb.View(w.db, func(dbtx walletdb.ReadTx) error {
		txmgrNs := dbtx.ReadBucket(wtxmgrNamespaceKey)

		rangeFn := func(details []wtxmgr.TxDetails) (bool, error) {
			// TODO: probably should make RangeTransactions not reuse the
			// details backing array memory.
			dets := make([]wtxmgr.TxDetails, len(details))
			copy(dets, details)
			details = dets

			txs := make([]TransactionSummary, 0, len(details))
			for i := range details {
				txs = append(txs, makeTxSummary(dbtx, w, &details[i]))
			}

			if details[0].Block.Height != -1 {
				blockHash := details[0].Block.Hash
				res.MinedTransactions = append(res.MinedTransactions, Block{
					Hash:         &blockHash,
					Height:       details[0].Block.Height,
					Timestamp:    details[0].Block.Time.Unix(),
					Transactions: txs,
				})
			} else {
				res.UnminedTransactions = txs
			}

			select {
			case <-cancel:
				return true, nil
			default:
				return false, nil
			}
		}

		return w.TxStore.RangeTransactions(txmgrNs, start, end, rangeFn)
	})
	return &res, err
}

// AccountResult is a single account result for the AccountsResult type.
type AccountResult struct {
	waddrmgr.AccountProperties
	TotalBalance btcutil.Amount
}

// AccountsResult is the resutl of the wallet's Accounts method.  See that
// method for more details.
type AccountsResult struct {
	Accounts           []AccountResult
	CurrentBlockHash   *chainhash.Hash
	CurrentBlockHeight int32
}

// Accounts returns the current names, numbers, and total balances of all
// accounts in the wallet restricted to a particular key scope.  The current
// chain tip is included in the result for atomicity reasons.
//
// TODO(jrick): Is the chain tip really needed, since only the total balances
// are included?
func (w *Wallet) Accounts(scope waddrmgr.KeyScope) (*AccountsResult, error) {
	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return nil, err
	}

	var (
		accounts        []AccountResult
		syncBlockHash   *chainhash.Hash
		syncBlockHeight int32
	)
	err = walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		syncBlock := w.Manager.SyncedTo()
		syncBlockHash = &syncBlock.Hash
		syncBlockHeight = syncBlock.Height
		unspent, err := w.TxStore.UnspentOutputs(txmgrNs)
		if err != nil {
			return err
		}
		err = manager.ForEachAccount(addrmgrNs, func(acct uint32) error {
			props, err := manager.AccountProperties(addrmgrNs, acct)
			if err != nil {
				return err
			}
			accounts = append(accounts, AccountResult{
				AccountProperties: *props,
				// TotalBalance set below
			})
			return nil
		})
		if err != nil {
			return err
		}
		m := make(map[uint32]*btcutil.Amount)
		for i := range accounts {
			a := &accounts[i]
			m[a.AccountNumber] = &a.TotalBalance
		}
		for i := range unspent {
			output := unspent[i]
			var outputAcct uint32
			_, addrs, _, err := txscript.ExtractPkScriptAddrs(output.PkScript, w.chainParams)
			if err == nil && len(addrs) > 0 {
				_, outputAcct, err = w.Manager.AddrAccount(addrmgrNs, addrs[0])
			}
			if err == nil {
				amt, ok := m[outputAcct]
				if ok {
					*amt += output.Amount
				}
			}
		}
		return nil
	})
	return &AccountsResult{
		Accounts:           accounts,
		CurrentBlockHash:   syncBlockHash,
		CurrentBlockHeight: syncBlockHeight,
	}, err
}

// AccountBalanceResult is a single result for the Wallet.AccountBalances method.
type AccountBalanceResult struct {
	AccountNumber  uint32
	AccountName    string
	AccountBalance btcutil.Amount
}

// AccountBalances returns all accounts in the wallet and their balances.
// Balances are determined by excluding transactions that have not met
// requiredConfs confirmations.
func (w *Wallet) AccountBalances(scope waddrmgr.KeyScope,
	requiredConfs int32) ([]AccountBalanceResult, error) {

	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return nil, err
	}

	var results []AccountBalanceResult
	err = walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		syncBlock := w.Manager.SyncedTo()

		// Fill out all account info except for the balances.
		lastAcct, err := manager.LastAccount(addrmgrNs)
		if err != nil {
			return err
		}
		results = make([]AccountBalanceResult, lastAcct+2)
		for i := range results[:len(results)-1] {
			accountName, err := manager.AccountName(addrmgrNs, uint32(i))
			if err != nil {
				return err
			}
			results[i].AccountNumber = uint32(i)
			results[i].AccountName = accountName
		}
		results[len(results)-1].AccountNumber = waddrmgr.ImportedAddrAccount
		results[len(results)-1].AccountName = waddrmgr.ImportedAddrAccountName

		// Fetch all unspent outputs, and iterate over them tallying each
		// account's balance where the output script pays to an account address
		// and the required number of confirmations is met.
		unspentOutputs, err := w.TxStore.UnspentOutputs(txmgrNs)
		if err != nil {
			return err
		}
		for i := range unspentOutputs {
			output := &unspentOutputs[i]
			if !confirmed(requiredConfs, output.Height, syncBlock.Height) {
				continue
			}
			if output.FromCoinBase && !confirmed(int32(w.ChainParams().CoinbaseMaturity),
				output.Height, syncBlock.Height) {
				continue
			}
			_, addrs, _, err := txscript.ExtractPkScriptAddrs(output.PkScript, w.chainParams)
			if err != nil || len(addrs) == 0 {
				continue
			}
			if isStake(output.PkScript) {
				continue
			}
			outputAcct, err := manager.AddrAccount(addrmgrNs, addrs[0])
			if err != nil {
				continue
			}
			switch {
			case outputAcct == waddrmgr.ImportedAddrAccount:
				results[len(results)-1].AccountBalance += output.Amount
			case outputAcct > lastAcct:
				return errors.New("waddrmgr.Manager.AddrAccount returned account " +
					"beyond recorded last account")
			default:
				results[outputAcct].AccountBalance += output.Amount
			}
		}
		return nil
	})
	return results, err
}

// creditSlice satisifies the sort.Interface interface to provide sorting
// transaction credits from oldest to newest.  Credits with the same receive
// time and mined in the same block are not guaranteed to be sorted by the order
// they appear in the block.  Credits from the same transaction are sorted by
// output index.
type creditSlice []wtxmgr.Credit

func (s creditSlice) Len() int {
	return len(s)
}

func (s creditSlice) Less(i, j int) bool {
	switch {
	// If both credits are from the same tx, sort by output index.
	case s[i].OutPoint.Hash == s[j].OutPoint.Hash:
		return s[i].OutPoint.Index < s[j].OutPoint.Index

	// If both transactions are unmined, sort by their received date.
	case s[i].Height == -1 && s[j].Height == -1:
		return s[i].Received.Before(s[j].Received)

	// Unmined (newer) txs always come last.
	case s[i].Height == -1:
		return false
	case s[j].Height == -1:
		return true

	// If both txs are mined in different blocks, sort by block height.
	default:
		return s[i].Height < s[j].Height
	}
}

func (s creditSlice) Swap(i, j int) {
	s[i], s[j] = s[j], s[i]
}

// ListUnspent returns a slice of objects representing the unspent wallet
// transactions fitting the given criteria. The confirmations will be more than
// minconf, less than maxconf and if addresses is populated only the addresses
// contained within it will be considered.  If we know nothing about a
// transaction an empty array will be returned.
func (w *Wallet) ListUnspent(minconf, maxconf int32,
	accountName string) ([]*btcjson.ListUnspentResult, error) {

	var results []*btcjson.ListUnspentResult
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		syncBlock := w.Manager.SyncedTo()

		filter := accountName != ""
		unspent, err := w.TxStore.UnspentOutputs(txmgrNs)
		if err != nil {
			return err
		}
		sort.Sort(sort.Reverse(creditSlice(unspent)))

		defaultAccountName := "default"

		results = make([]*btcjson.ListUnspentResult, 0, len(unspent))
		for i := range unspent {
			output := unspent[i]

			// Outputs with fewer confirmations than the minimum or more
			// confs than the maximum are excluded.
			confs := confirms(output.Height, syncBlock.Height)
			if confs < minconf || confs > maxconf {
				continue
			}

			// Only mature coinbase outputs are included.
			if output.FromCoinBase {
				target := int32(w.ChainParams().CoinbaseMaturity)
				if !confirmed(target, output.Height, syncBlock.Height) {
					continue
				}
			}

			// Exclude locked outputs from the result set.
			if w.LockedOutpoint(output.OutPoint) {
				continue
			}

			// Lookup the associated account for the output.  Use the
			// default account name in case there is no associated account
			// for some reason, although this should never happen.
			//
			// This will be unnecessary once transactions and outputs are
			// grouped under the associated account in the db.
			outputAcctName := defaultAccountName
			sc, addrs, _, err := txscript.ExtractPkScriptAddrs(
				output.PkScript, w.chainParams)
			if err != nil {
				continue
			}
			if len(addrs) > 0 {
				smgr, acct, err := w.Manager.AddrAccount(addrmgrNs, addrs[0])
				if err == nil {
					s, err := smgr.AccountName(addrmgrNs, acct)
					if err == nil {
						outputAcctName = s
					}
				}
			}

			if filter && outputAcctName != accountName {
				continue
			}

			// At the moment watch-only addresses are not supported, so all
			// recorded outputs that are not multisig are "spendable".
			// Multisig outputs are only "spendable" if all keys are
			// controlled by this wallet.
			//
			// TODO: Each case will need updates when watch-only addrs
			// is added.  For P2PK, P2PKH, and P2SH, the address must be
			// looked up.
			// For multisig, all pubkeys must belong to the manager with
			// the associated private key (currently it only checks whether
			// the pubkey exists, since the private key is required at the
			// moment).
			var spendable bool
		scSwitch:
			switch sc {
			case txscript.PubKeyHashTy:
				spendable = true
			case txscript.PubKeyTy:
				spendable = true
			case txscript.WitnessV0ScriptHashTy:
				spendable = true
			case txscript.WitnessV0PubKeyHashTy:
				spendable = true
			case txscript.MultiSigTy:
				for _, a := range addrs {
					_, err := w.Manager.Address(addrmgrNs, a)
					if err == nil {
						continue
					}
					if waddrmgr.IsError(err, waddrmgr.ErrAddressNotFound) {
						break scSwitch
					}
					return err
				}
				spendable = true
			}

			result := &btcjson.ListUnspentResult{
				TxID:          output.OutPoint.Hash.String(),
				Vout:          output.OutPoint.Index,
				Account:       outputAcctName,
				ScriptPubKey:  hex.EncodeToString(output.PkScript),
				Amount:        output.Amount.ToBTC(),
				Confirmations: int64(confs),
				Spendable:     spendable,
				// Solvable:   , TODO: make this work
				IsStake: isStake(output.PkScript),
			}

			// BUG: this should be a JSON array so that all
			// addresses can be included, or removed (and the
			// caller extracts addresses from the pkScript).
			if len(addrs) > 0 {
				result.Address = addrs[0].EncodeAddress()
			}

			results = append(results, result)
		}
		return nil
	})
	return results, err
}

// ListLeasedOutputs returns a list of objects representing the currently locked
// utxos.
func (w *Wallet) ListLeasedOutputs() ([]*wtxmgr.LockedOutput, error) {
	var outputs []*wtxmgr.LockedOutput
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		ns := tx.ReadBucket(wtxmgrNamespaceKey)
		var err error
		outputs, err = w.TxStore.ListLockedOutputs(ns)
		return err
	})
	return outputs, err
}

// DumpPrivKeys returns the WIF-encoded private keys for all addresses with
// private keys in a wallet.
func (w *Wallet) DumpPrivKeys() ([]string, error) {
	var privkeys []string
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		// Iterate over each active address, appending the private key to
		// privkeys.
		return w.Manager.ForEachActiveAddress(addrmgrNs, func(addr btcutil.Address) error {
			ma, err := w.Manager.Address(addrmgrNs, addr)
			if err != nil {
				return err
			}

			// Only those addresses with keys needed.
			pka, ok := ma.(waddrmgr.ManagedPubKeyAddress)
			if !ok {
				return nil
			}

			wif, err := pka.ExportPrivKey()
			if err != nil {
				// It would be nice to zero out the array here. However,
				// since strings in go are immutable, and we have no
				// control over the caller I don't think we can. :(
				return err
			}
			privkeys = append(privkeys, wif.String())
			return nil
		})
	})
	return privkeys, err
}

// DumpWIFPrivateKey returns the WIF encoded private key for a
// single wallet address.
func (w *Wallet) DumpWIFPrivateKey(addr btcutil.Address) (string, error) {
	var maddr waddrmgr.ManagedAddress
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		waddrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		// Get private key from wallet if it exists.
		var err error
		maddr, err = w.Manager.Address(waddrmgrNs, addr)
		return err
	})
	if err != nil {
		return "", err
	}

	pka, ok := maddr.(waddrmgr.ManagedPubKeyAddress)
	if !ok {
		return "", fmt.Errorf("address %s is not a key type", addr)
	}

	wif, err := pka.ExportPrivKey()
	if err != nil {
		return "", err
	}
	return wif.String(), nil
}

// LockedOutpoint returns whether an outpoint has been marked as locked and
// should not be used as an input for created transactions.
func (w *Wallet) LockedOutpoint(op wire.OutPoint) bool {
	w.lockedOutpointsMtx.Lock()
	defer w.lockedOutpointsMtx.Unlock()

	_, locked := w.lockedOutpoints[op]
	return locked
}

// LockOutpoint marks an outpoint as locked, that is, it should not be used as
// an input for newly created transactions.
func (w *Wallet) LockOutpoint(op wire.OutPoint) {
	w.lockedOutpointsMtx.Lock()
	defer w.lockedOutpointsMtx.Unlock()

	w.lockedOutpoints[op] = struct{}{}
}

// UnlockOutpoint marks an outpoint as unlocked, that is, it may be used as an
// input for newly created transactions.
func (w *Wallet) UnlockOutpoint(op wire.OutPoint) {
	w.lockedOutpointsMtx.Lock()
	defer w.lockedOutpointsMtx.Unlock()

	delete(w.lockedOutpoints, op)
}

// ResetLockedOutpoints resets the set of locked outpoints so all may be used
// as inputs for new transactions.
func (w *Wallet) ResetLockedOutpoints() {
	w.lockedOutpointsMtx.Lock()
	defer w.lockedOutpointsMtx.Unlock()

	w.lockedOutpoints = map[wire.OutPoint]struct{}{}
}

// LockedOutpoints returns a slice of currently locked outpoints.  This is
// intended to be used by marshaling the result as a JSON array for
// listlockunspent RPC results.
func (w *Wallet) LockedOutpoints() []btcjson.TransactionInput {
	w.lockedOutpointsMtx.Lock()
	defer w.lockedOutpointsMtx.Unlock()

	locked := make([]btcjson.TransactionInput, len(w.lockedOutpoints))
	i := 0
	for op := range w.lockedOutpoints {
		locked[i] = btcjson.TransactionInput{
			Txid: op.Hash.String(),
			Vout: op.Index,
		}
		i++
	}
	return locked
}

// LeaseOutput locks an output to the given ID, preventing it from being
// available for coin selection. The absolute time of the lock's expiration is
// returned. The expiration of the lock can be extended by successive
// invocations of this call.
//
// Outputs can be unlocked before their expiration through `UnlockOutput`.
// Otherwise, they are unlocked lazily through calls which iterate through all
// known outputs, e.g., `CalculateBalance`, `ListUnspent`.
//
// If the output is not known, ErrUnknownOutput is returned. If the output has
// already been locked to a different ID, then ErrOutputAlreadyLocked is
// returned.
//
// NOTE: This differs from LockOutpoint in that outputs are locked for a limited
// amount of time and their locks are persisted to disk.
func (w *Wallet) LeaseOutput(id wtxmgr.LockID, op wire.OutPoint,
	duration time.Duration) (time.Time, error) {

	var expiry time.Time
	err := walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
		ns := tx.ReadWriteBucket(wtxmgrNamespaceKey)
		var err error
		expiry, err = w.TxStore.LockOutput(ns, id, op, duration)
		return err
	})
	return expiry, err
}

// ReleaseOutput unlocks an output, allowing it to be available for coin
// selection if it remains unspent. The ID should match the one used to
// originally lock the output.
func (w *Wallet) ReleaseOutput(id wtxmgr.LockID, op wire.OutPoint) error {
	return walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
		ns := tx.ReadWriteBucket(wtxmgrNamespaceKey)
		return w.TxStore.UnlockOutput(ns, id, op)
	})
}

// resendUnminedTxs iterates through all transactions that spend from wallet
// credits that are not known to have been mined into a block, and attempts
// to send each to the chain server for relay.
func (w *Wallet) resendUnminedTxs() {
	var txs []*wire.MsgTx
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)
		var err error
		txs, err = w.TxStore.UnminedTxs(txmgrNs)
		return err
	})
	if err != nil {
		log.Errorf("Unable to retrieve unconfirmed transactions to "+
			"resend: %v", err)
		return
	}

	for _, tx := range txs {
		txHash, err := w.publishTransaction(tx)
		if err != nil {
			log.Debugf("Unable to rebroadcast transaction %v: %v",
				tx.TxHash(), err)
			continue
		}

		log.Debugf("Successfully rebroadcast unconfirmed transaction %v",
			txHash)
	}
}

// SortedActivePaymentAddresses returns a slice of all active payment
// addresses in a wallet.
func (w *Wallet) SortedActivePaymentAddresses() ([]string, error) {
	var addrStrs []string
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		return w.Manager.ForEachActiveAddress(addrmgrNs, func(addr btcutil.Address) error {
			addrStrs = append(addrStrs, addr.EncodeAddress())
			return nil
		})
	})
	if err != nil {
		return nil, err
	}

	sort.Strings(addrStrs)
	return addrStrs, nil
}

// NewAddress returns the next external chained address for a wallet.
func (w *Wallet) NewAddress(account uint32,
	scope waddrmgr.KeyScope) (btcutil.Address, error) {

	chainClient, err := w.requireChainClient()
	if err != nil {
		return nil, err
	}

	var (
		addr  btcutil.Address
		props *waddrmgr.AccountProperties
	)
	err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
		addrmgrNs := tx.ReadWriteBucket(waddrmgrNamespaceKey)
		var err error
		addr, props, err = w.newAddress(addrmgrNs, account, scope)
		return err
	})
	if err != nil {
		return nil, err
	}

	// Notify the rpc server about the newly created address.
	err = chainClient.NotifyReceived([]btcutil.Address{addr})
	if err != nil {
		return nil, err
	}

	w.NtfnServer.notifyAccountProperties(props)

	return addr, nil
}

func (w *Wallet) newAddress(addrmgrNs walletdb.ReadWriteBucket, account uint32,
	scope waddrmgr.KeyScope) (btcutil.Address, *waddrmgr.AccountProperties, error) {

	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return nil, nil, err
	}

	// Get next address from wallet.
	addrs, err := manager.NextAddresses(addrmgrNs, account, waddrmgr.ExternalBranch, 1)
	if err != nil {
		return nil, nil, err
	}

	props, err := manager.AccountProperties(addrmgrNs, account)
	if err != nil {
		log.Errorf("Cannot fetch account properties for notification "+
			"after deriving next external address: %v", err)
		return nil, nil, err
	}

	return addrs[0].Address(), props, nil
}

// NewChangeAddress returns a new change address for a wallet.
func (w *Wallet) NewChangeAddress(account uint32,
	scope waddrmgr.KeyScope) (btcutil.Address, error) {

	chainClient, err := w.requireChainClient()
	if err != nil {
		return nil, err
	}

	var addr btcutil.Address
	err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
		addrmgrNs := tx.ReadWriteBucket(waddrmgrNamespaceKey)
		var err error
		addr, err = w.newChangeAddress(addrmgrNs, account, scope)
		return err
	})
	if err != nil {
		return nil, err
	}

	// Notify the rpc server about the newly created address.
	err = chainClient.NotifyReceived([]btcutil.Address{addr})
	if err != nil {
		return nil, err
	}

	return addr, nil
}

// newChangeAddress returns a new change address for the wallet.
//
// NOTE: This method requires the caller to use the backend's NotifyReceived
// method in order to detect when an on-chain transaction pays to the address
// being created.
func (w *Wallet) newChangeAddress(addrmgrNs walletdb.ReadWriteBucket,
	account uint32, scope waddrmgr.KeyScope) (btcutil.Address, error) {

	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return nil, err
	}

	// Get next chained change address from wallet for account.
	addrs, err := manager.NextAddresses(addrmgrNs, account, waddrmgr.InternalBranch, 1)
	if err != nil {
		return nil, err
	}

	return addrs[0].Address(), nil
}

// confirmed checks whether a transaction at height txHeight has met minconf
// confirmations for a blockchain at height curHeight.
func confirmed(minconf, txHeight, curHeight int32) bool {
	return confirms(txHeight, curHeight) >= minconf
}

// confirms returns the number of confirmations for a transaction in a block at
// height txHeight (or -1 for an unconfirmed tx) given the chain height
// curHeight.
func confirms(txHeight, curHeight int32) int32 {
	switch {
	case txHeight == -1, txHeight > curHeight:
		return 0
	default:
		return curHeight - txHeight + 1
	}
}

// AccountTotalReceivedResult is a single result for the
// Wallet.TotalReceivedForAccounts method.
type AccountTotalReceivedResult struct {
	AccountNumber    uint32
	AccountName      string
	TotalReceived    btcutil.Amount
	LastConfirmation int32
}

// TotalReceivedForAccounts iterates through a wallet's transaction history,
// returning the total amount of Bitcoin received for all accounts.
func (w *Wallet) TotalReceivedForAccounts(scope waddrmgr.KeyScope,
	minConf int32) ([]AccountTotalReceivedResult, error) {

	manager, err := w.Manager.FetchScopedKeyManager(scope)
	if err != nil {
		return nil, err
	}

	var results []AccountTotalReceivedResult
	err = walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		addrmgrNs := tx.ReadBucket(waddrmgrNamespaceKey)
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		syncBlock := w.Manager.SyncedTo()

		err := manager.ForEachAccount(addrmgrNs, func(account uint32) error {
			accountName, err := manager.AccountName(addrmgrNs, account)
			if err != nil {
				return err
			}
			results = append(results, AccountTotalReceivedResult{
				AccountNumber: account,
				AccountName:   accountName,
			})
			return nil
		})
		if err != nil {
			return err
		}

		var stopHeight int32

		if minConf > 0 {
			stopHeight = syncBlock.Height - minConf + 1
		} else {
			stopHeight = -1
		}

		rangeFn := func(details []wtxmgr.TxDetails) (bool, error) {
			for i := range details {
				detail := &details[i]
				for _, cred := range detail.Credits {
					pkScript := detail.MsgTx.TxOut[cred.Index].PkScript
					var outputAcct uint32
					_, addrs, _, err := txscript.ExtractPkScriptAddrs(pkScript, w.chainParams)
					if err == nil && len(addrs) > 0 {
						_, outputAcct, err = w.Manager.AddrAccount(addrmgrNs, addrs[0])
					}
					if err == nil {
						acctIndex := int(outputAcct)
						if outputAcct == waddrmgr.ImportedAddrAccount {
							acctIndex = len(results) - 1
						}
						res := &results[acctIndex]
						res.TotalReceived += cred.Amount
						res.LastConfirmation = confirms(
							detail.Block.Height, syncBlock.Height)
					}
				}
			}
			return false, nil
		}
		return w.TxStore.RangeTransactions(txmgrNs, 0, stopHeight, rangeFn)
	})
	return results, err
}

// TotalReceivedForAddr iterates through a wallet's transaction history,
// returning the total amount of bitcoins received for a single wallet
// address.
func (w *Wallet) TotalReceivedForAddr(addr btcutil.Address, minConf int32) (btcutil.Amount, error) {
	var amount btcutil.Amount
	err := walletdb.View(w.db, func(tx walletdb.ReadTx) error {
		txmgrNs := tx.ReadBucket(wtxmgrNamespaceKey)

		syncBlock := w.Manager.SyncedTo()

		var (
			addrStr    = addr.EncodeAddress()
			stopHeight int32
		)

		if minConf > 0 {
			stopHeight = syncBlock.Height - minConf + 1
		} else {
			stopHeight = -1
		}
		rangeFn := func(details []wtxmgr.TxDetails) (bool, error) {
			for i := range details {
				detail := &details[i]
				for _, cred := range detail.Credits {
					pkScript := detail.MsgTx.TxOut[cred.Index].PkScript
					_, addrs, _, err := txscript.ExtractPkScriptAddrs(pkScript,
						w.chainParams)
					// An error creating addresses from the output script only
					// indicates a non-standard script, so ignore this credit.
					if err != nil {
						continue
					}
					for _, a := range addrs {
						if addrStr == a.EncodeAddress() {
							amount += cred.Amount
							break
						}
					}
				}
			}
			return false, nil
		}
		return w.TxStore.RangeTransactions(txmgrNs, 0, stopHeight, rangeFn)
	})
	return amount, err
}

// SendOutputs creates and sends payment transactions. Coin selection is
// performed by the wallet, choosing inputs that belong to the given key scope
// and account, unless a key scope is not specified. In that case, inputs from
// accounts matching the account number provided across all key scopes may be
// selected. This is done to handle the default account case, where a user wants
// to fund a PSBT with inputs regardless of their type (NP2WKH, P2WKH, etc.). It
// returns the transaction upon success.
func (w *Wallet) SendOutputs(outputs []*wire.TxOut, keyScope *waddrmgr.KeyScope,
	account uint32, minconf int32, satPerKb btcutil.Amount,
	coinSelectionStrategy CoinSelectionStrategy, label string) (
	*wire.MsgTx, error) {

	// Ensure the outputs to be created adhere to the network's consensus
	// rules.
	for _, output := range outputs {
		err := txrules.CheckOutput(
			output, txrules.DefaultRelayFeePerKb,
		)
		if err != nil {
			return nil, err
		}
	}

	// Create the transaction and broadcast it to the network. The
	// transaction will be added to the database in order to ensure that we
	// continue to re-broadcast the transaction upon restarts until it has
	// been confirmed.
	createdTx, err := w.CreateSimpleTx(
		keyScope, account, outputs, minconf, satPerKb,
		coinSelectionStrategy, false,
	)
	if err != nil {
		return nil, err
	}

	txHash, err := w.reliablyPublishTransaction(createdTx.Tx, label)
	if err != nil {
		return nil, err
	}

	// Sanity check on the returned tx hash.
	if *txHash != createdTx.Tx.TxHash() {
		return nil, errors.New("tx hash mismatch")
	}

	return createdTx.Tx, nil
}

// SignatureError records the underlying error when validating a transaction
// input signature.
type SignatureError struct {
	InputIndex uint32
	Error      error
}

// SignTransaction uses secrets of the wallet, as well as additional secrets
// passed in by the caller, to create and add input signatures to a transaction.
//
// Transaction input script validation is used to confirm that all signatures
// are valid.  For any invalid input, a SignatureError is added to the returns.
// The final error return is reserved for unexpected or fatal errors, such as
// being unable to determine a previous output script to redeem.
//
// The transaction pointed to by tx is modified by this function.
func (w *Wallet) SignTransaction(tx *wire.MsgTx, hashType txscript.SigHashType,
	additionalPrevScripts map[wire.OutPoint][]byte,
	additionalKeysByAddress map[string]*btcutil.WIF,
	p2shRedeemScriptsByAddress map[string][]byte) ([]SignatureError, error) {

	var signErrors []SignatureError
	err := walletdb.View(w.db, func(dbtx walletdb.ReadTx) error {
		addrmgrNs := dbtx.ReadBucket(waddrmgrNamespaceKey)
		txmgrNs := dbtx.ReadBucket(wtxmgrNamespaceKey)

		for i, txIn := range tx.TxIn {
			prevOutScript, ok := additionalPrevScripts[txIn.PreviousOutPoint]
			if !ok {
				prevHash := &txIn.PreviousOutPoint.Hash
				prevIndex := txIn.PreviousOutPoint.Index
				txDetails, err := w.TxStore.TxDetails(txmgrNs, prevHash)
				if err != nil {
					return fmt.Errorf("cannot query previous transaction "+
						"details for %v: %v", txIn.PreviousOutPoint, err)
				}
				if txDetails == nil {
					return fmt.Errorf("%v not found",
						txIn.PreviousOutPoint)
				}
				prevOutScript = txDetails.MsgTx.TxOut[prevIndex].PkScript
			}

			// Set up our callbacks that we pass to txscript so it can
			// look up the appropriate keys and scripts by address.
			getKey := txscript.KeyClosure(func(addr btcutil.Address) (*btcec.PrivateKey, bool, error) {
				if len(additionalKeysByAddress) != 0 {
					addrStr := addr.EncodeAddress()
					wif, ok := additionalKeysByAddress[addrStr]
					if !ok {
						return nil, false,
							errors.New("no key for address")
					}
					return wif.PrivKey, wif.CompressPubKey, nil
				}
				address, err := w.Manager.Address(addrmgrNs, addr)
				if err != nil {
					return nil, false, err
				}

				pka, ok := address.(waddrmgr.ManagedPubKeyAddress)
				if !ok {
					return nil, false, fmt.Errorf("address %v is not "+
						"a pubkey address", address.Address().EncodeAddress())
				}

				key, err := pka.PrivKey()
				if err != nil {
					return nil, false, err
				}

				return key, pka.Compressed(), nil
			})
			getScript := txscript.ScriptClosure(func(addr btcutil.Address) ([]byte, error) {
				// If keys were provided then we can only use the
				// redeem scripts provided with our inputs, too.
				if len(additionalKeysByAddress) != 0 {
					addrStr := addr.EncodeAddress()
					script, ok := p2shRedeemScriptsByAddress[addrStr]
					if !ok {
						return nil, errors.New("no script for address")
					}
					return script, nil
				}
				address, err := w.Manager.Address(addrmgrNs, addr)
				if err != nil {
					return nil, err
				}
				sa, ok := address.(waddrmgr.ManagedScriptAddress)
				if !ok {
					return nil, errors.New("address is not a script" +
						" address")
				}

				return sa.Script()
			})

			// SigHashSingle inputs can only be signed if there's a
			// corresponding output. However this could be already signed,
			// so we always verify the output.
			if (hashType&txscript.SigHashSingle) !=
				txscript.SigHashSingle || i < len(tx.TxOut) {

				script, err := txscript.SignTxOutput(w.ChainParams(),
					tx, i, prevOutScript, hashType, getKey,
					getScript, txIn.SignatureScript)
				// Failure to sign isn't an error, it just means that
				// the tx isn't complete.
				if err != nil {
					signErrors = append(signErrors, SignatureError{
						InputIndex: uint32(i),
						Error:      err,
					})
					continue
				}
				txIn.SignatureScript = script
			}

			// Either it was already signed or we just signed it.
			// Find out if it is completely satisfied or still needs more.
			vm, err := txscript.NewEngine(prevOutScript, tx, i,
				txscript.StandardVerifyFlags, nil, nil, 0)
			if err == nil {
				err = vm.Execute()
			}
			if err != nil {
				signErrors = append(signErrors, SignatureError{
					InputIndex: uint32(i),
					Error:      err,
				})
			}
		}
		return nil
	})
	return signErrors, err
}

// ErrDoubleSpend is an error returned from PublishTransaction in case the
// published transaction failed to propagate since it was double spending a
// confirmed transaction or a transaction in the mempool.
type ErrDoubleSpend struct {
	backendError error
}

// Error returns the string representation of ErrDoubleSpend.
//
// NOTE: Satisfies the error interface.
func (e *ErrDoubleSpend) Error() string {
	return fmt.Sprintf("double spend: %v", e.backendError)
}

// Unwrap returns the underlying error returned from the backend.
func (e *ErrDoubleSpend) Unwrap() error {
	return e.backendError
}

// ErrReplacement is an error returned from PublishTransaction in case the
// published transaction failed to propagate since it was double spending a
// replacable transaction but did not satisfy the requirements to replace it.
type ErrReplacement struct {
	backendError error
}

// Error returns the string representation of ErrReplacement.
//
// NOTE: Satisfies the error interface.
func (e *ErrReplacement) Error() string {
	return fmt.Sprintf("unable to replace transaction: %v", e.backendError)
}

// Unwrap returns the underlying error returned from the backend.
func (e *ErrReplacement) Unwrap() error {
	return e.backendError
}

// PublishTransaction sends the transaction to the consensus RPC server so it
// can be propagated to other nodes and eventually mined.
//
// This function is unstable and will be removed once syncing code is moved out
// of the wallet.
func (w *Wallet) PublishTransaction(tx *wire.MsgTx, label string) error {
	_, err := w.reliablyPublishTransaction(tx, label)
	return err
}

// reliablyPublishTransaction is a superset of publishTransaction which contains
// the primary logic required for publishing a transaction, updating the
// relevant database state, and finally possible removing the transaction from
// the database (along with cleaning up all inputs used, and outputs created) if
// the transaction is rejected by the backend.
func (w *Wallet) reliablyPublishTransaction(tx *wire.MsgTx,
	label string) (*chainhash.Hash, error) {

	chainClient, err := w.requireChainClient()
	if err != nil {
		return nil, err
	}

	// As we aim for this to be general reliable transaction broadcast API,
	// we'll write this tx to disk as an unconfirmed transaction. This way,
	// upon restarts, we'll always rebroadcast it, and also add it to our
	// set of records.
	txRec, err := wtxmgr.NewTxRecordFromMsgTx(tx, time.Now())
	if err != nil {
		return nil, err
	}

	// Along the way, we'll extract our relevant destination addresses from
	// the transaction.
	var ourAddrs []btcutil.Address
	err = walletdb.Update(w.db, func(dbTx walletdb.ReadWriteTx) error {
		addrmgrNs := dbTx.ReadWriteBucket(waddrmgrNamespaceKey)
		for _, txOut := range tx.TxOut {
			_, addrs, _, err := txscript.ExtractPkScriptAddrs(
				txOut.PkScript, w.chainParams,
			)
			if err != nil {
				// Non-standard outputs can safely be skipped because
				// they're not supported by the wallet.
				continue
			}
			for _, addr := range addrs {
				// Skip any addresses which are not relevant to
				// us.
				_, err := w.Manager.Address(addrmgrNs, addr)
				if waddrmgr.IsError(err, waddrmgr.ErrAddressNotFound) {
					continue
				}
				if err != nil {
					return err
				}
				ourAddrs = append(ourAddrs, addr)
			}
		}

		// If there is a label we should write, get the namespace key
		// and record it in the tx store.
		if len(label) != 0 {
			txmgrNs := dbTx.ReadWriteBucket(wtxmgrNamespaceKey)
			if err = w.TxStore.PutTxLabel(txmgrNs, tx.TxHash(), label); err != nil {
				return err
			}
		}

		return w.addRelevantTx(dbTx, txRec, nil)
	})
	if err != nil {
		return nil, err
	}

	// We'll also ask to be notified of the transaction once it confirms
	// on-chain. This is done outside of the database transaction to prevent
	// backend interaction within it.
	if err := chainClient.NotifyReceived(ourAddrs); err != nil {
		return nil, err
	}

	return w.publishTransaction(tx)
}

// publishTransaction attempts to send an unconfirmed transaction to the
// wallet's current backend. In the event that sending the transaction fails for
// whatever reason, it will be removed from the wallet's unconfirmed transaction
// store.
func (w *Wallet) publishTransaction(tx *wire.MsgTx) (*chainhash.Hash, error) {
	chainClient, err := w.requireChainClient()
	if err != nil {
		return nil, err
	}

	// match is a helper method to easily string match on the error
	// message.
	match := func(err error, s string) bool {
		return strings.Contains(strings.ToLower(err.Error()), s)
	}

	_, err = chainClient.SendRawTransaction(tx, false)

	// Determine if this was an RPC error thrown due to the transaction
	// already confirming.
	var rpcTxConfirmed bool
	if rpcErr, ok := err.(*btcjson.RPCError); ok {
		rpcTxConfirmed = rpcErr.Code == btcjson.ErrRPCTxAlreadyInChain
	}

	var (
		txid      = tx.TxHash()
		returnErr error
	)

	switch {
	case err == nil:
		return &txid, nil

	// Since we have different backends that can be used with the wallet,
	// we'll need to check specific errors for each one.
	//
	// If the transaction is already in the mempool, we can just return now.
	//
	// This error is returned when broadcasting/sending a transaction to a
	// lbcd node that already has it in their mempool.
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/mempool/mempool.go#L953
	case match(err, "already have transaction"):
		fallthrough

	// This error is returned when broadcasting a transaction to a bitcoind
	// node that already has it in their mempool.
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/validation.cpp#L590
	case match(err, "txn-already-in-mempool"):
		return &txid, nil

	// If the transaction has already confirmed, we can safely remove it
	// from the unconfirmed store as it should already exist within the
	// confirmed store. We'll avoid returning an error as the broadcast was
	// in a sense successful.
	//
	// This error is returned when sending a transaction that has already
	// confirmed to a lbcd/bitcoind node over RPC.
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/rpcserver.go#L3355
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/node/transaction.cpp#L36
	case rpcTxConfirmed:
		fallthrough

	// This error is returned when broadcasting a transaction that has
	// already confirmed to a lbcd node over the P2P network.
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/mempool/mempool.go#L1036
	case match(err, "transaction already exists"):
		fallthrough

	// This error is returned when broadcasting a transaction that has
	// already confirmed to a bitcoind node over the P2P network.
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/validation.cpp#L648
	case match(err, "txn-already-known"):
		dbErr := walletdb.Update(w.db, func(dbTx walletdb.ReadWriteTx) error {
			txmgrNs := dbTx.ReadWriteBucket(wtxmgrNamespaceKey)
			txRec, err := wtxmgr.NewTxRecordFromMsgTx(tx, time.Now())
			if err != nil {
				return err
			}
			return w.TxStore.RemoveUnminedTx(txmgrNs, txRec)
		})
		if dbErr != nil {
			log.Warnf("Unable to remove confirmed transaction %v "+
				"from unconfirmed store: %v", tx.TxHash(), dbErr)
		}

		return &txid, nil

	// If the transactions is invalid since it attempts to double spend a
	// transaction already in the mempool or in the chain, we'll remove it
	// from the store and return an error.
	//
	// This error is returned from lbcd when there is already a transaction
	// not signaling replacement in the mempool that spends one of the
	// referenced outputs.
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/mempool/mempool.go#L591
	case match(err, "already spent"):
		fallthrough

	// This error is returned from lbcd when a referenced output cannot be
	// found, meaning it etiher has been spent or doesn't exist.
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/blockchain/chain.go#L405
	case match(err, "already been spent"):
		fallthrough

	// This error is returned from lbcd when a transaction is spending
	// either output that is missing or already spent, and orphans aren't
	// allowed.
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/mempool/mempool.go#L1409
	case match(err, "orphan transaction"):
		fallthrough

	// Error returned from bitcoind when output was spent by other
	// non-replacable transaction already in the mempool.
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/validation.cpp#L622
	case match(err, "txn-mempool-conflict"):
		fallthrough

	// Returned by bitcoind on the RPC when broadcasting a transaction that
	// is spending either output that is missing or already spent.
	//
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/node/transaction.cpp#L49
	// https://github.com/bitcoin/bitcoin/blob/0.20/src/validation.cpp#L642
	case match(err, "missing inputs") ||
		match(err, "bad-txns-inputs-missingorspent"):

		returnErr = &ErrDoubleSpend{
			backendError: err,
		}

	// Returned by bitcoind if the transaction spends outputs that would be
	// replaced by it.
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/validation.cpp#L790
	case match(err, "bad-txns-spends-conflicting-tx"):
		fallthrough

	// Returned by bitcoind when a replacement transaction did not have
	// enough fee.
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/validation.cpp#L830
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/validation.cpp#L894
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/validation.cpp#L904
	case match(err, "insufficient fee"):
		fallthrough

	// Returned by bitcoind in case the transaction would replace too many
	// transaction in the mempool.
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/validation.cpp#L858
	case match(err, "too many potential replacements"):
		fallthrough

	// Returned by bitcoind if the transaction spends an output that is
	// unconfimed and not spent by the transaction it replaces.
	// https://github.com/bitcoin/bitcoin/blob/9bf5768dd628b3a7c30dd42b5ed477a92c4d3540/src/validation.cpp#L882
	case match(err, "replacement-adds-unconfirmed"):
		fallthrough

	// Returned by lbcd when replacement transaction was rejected for
	// whatever reason.
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/mempool/mempool.go#L841
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/mempool/mempool.go#L854
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/mempool/mempool.go#L875
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/mempool/mempool.go#L896
	// https://github.com/lbryio/lbcd/blob/130ea5bddde33df32b06a1cdb42a6316eb73cff5/mempool/mempool.go#L913
	case match(err, "replacement transaction"):
		returnErr = &ErrReplacement{
			backendError: err,
		}

	// We received an error not matching any of the above cases.
	default:
		returnErr = fmt.Errorf("unmatched backend error: %v", err)
	}

	// If the transaction was rejected for whatever other reason, then
	// we'll remove it from the transaction store, as otherwise, we'll
	// attempt to continually re-broadcast it, and the UTXO state of the
	// wallet won't be accurate.
	dbErr := walletdb.Update(w.db, func(dbTx walletdb.ReadWriteTx) error {
		txmgrNs := dbTx.ReadWriteBucket(wtxmgrNamespaceKey)
		txRec, err := wtxmgr.NewTxRecordFromMsgTx(tx, time.Now())
		if err != nil {
			return err
		}
		return w.TxStore.RemoveUnminedTx(txmgrNs, txRec)
	})
	if dbErr != nil {
		log.Warnf("Unable to remove invalid transaction %v: %v",
			tx.TxHash(), dbErr)
	} else {
		log.Infof("Removed invalid transaction: %v",
			spew.Sdump(tx))
	}

	return nil, returnErr
}

// ChainParams returns the network parameters for the blockchain the wallet
// belongs to.
func (w *Wallet) ChainParams() *chaincfg.Params {
	return w.chainParams
}

// Database returns the underlying walletdb database. This method is provided
// in order to allow applications wrapping lbcwallet to store app-specific data
// with the wallet's database.
func (w *Wallet) Database() walletdb.DB {
	return w.db
}

// CreateWithCallback is the same as Create with an added callback that will be
// called in the same transaction the wallet structure is initialized.
func CreateWithCallback(db walletdb.DB, pubPass, privPass []byte,
	rootKey *hdkeychain.ExtendedKey, params *chaincfg.Params,
	birthday time.Time, cb func(walletdb.ReadWriteTx) error) error {

	return create(
		db, pubPass, privPass, rootKey, params, birthday, cb,
	)
}

// Create creates an new wallet, writing it to an empty database.  If the passed
// root key is non-nil, it is used.  Otherwise, a secure random seed of the
// recommended length is generated.
func Create(db walletdb.DB, pubPass, privPass []byte,
	rootKey *hdkeychain.ExtendedKey, params *chaincfg.Params,
	birthday time.Time) error {

	return create(
		db, pubPass, privPass, rootKey, params, birthday, nil,
	)
}
func create(db walletdb.DB, pubPass, privPass []byte,
	rootKey *hdkeychain.ExtendedKey, params *chaincfg.Params,
	birthday time.Time,
	cb func(walletdb.ReadWriteTx) error) error {

	// If no root key was provided, we create one now from a random seed.
	if rootKey == nil {
		hdSeed, err := hdkeychain.GenerateSeed(
			hdkeychain.RecommendedSeedLen,
		)
		if err != nil {
			return err
		}

		// Derive the master extended key from the seed.
		rootKey, err = hdkeychain.NewMaster(hdSeed, params)
		if err != nil {
			return fmt.Errorf("failed to derive master extended " +
				"key")
		}
	}

	// We need a private key if this isn't a watching only wallet.
	if rootKey != nil && !rootKey.IsPrivate() {
		return fmt.Errorf("need extended private key for wallet that " +
			"is not watching only")
	}

	return walletdb.Update(db, func(tx walletdb.ReadWriteTx) error {
		addrmgrNs, err := tx.CreateTopLevelBucket(waddrmgrNamespaceKey)
		if err != nil {
			return err
		}
		txmgrNs, err := tx.CreateTopLevelBucket(wtxmgrNamespaceKey)
		if err != nil {
			return err
		}

		err = waddrmgr.Create(
			addrmgrNs, rootKey, pubPass, privPass, params, nil,
			birthday,
		)
		if err != nil {
			return err
		}

		err = wtxmgr.Create(txmgrNs)
		if err != nil {
			return err
		}

		if cb != nil {
			return cb(tx)
		}

		return nil
	})
}

// Open loads an already-created wallet from the passed database and namespaces.
func Open(db walletdb.DB, pubPass []byte, cbs *waddrmgr.OpenCallbacks,
	params *chaincfg.Params, recoveryWindow uint32) (*Wallet, error) {

	var (
		addrMgr *waddrmgr.Manager
		txMgr   *wtxmgr.Store
	)

	// Before attempting to open the wallet, we'll check if there are any
	// database upgrades for us to proceed. We'll also create our references
	// to the address and transaction managers, as they are backed by the
	// database.
	err := walletdb.Update(db, func(tx walletdb.ReadWriteTx) error {
		addrMgrBucket := tx.ReadWriteBucket(waddrmgrNamespaceKey)
		if addrMgrBucket == nil {
			return errors.New("missing address manager namespace")
		}
		txMgrBucket := tx.ReadWriteBucket(wtxmgrNamespaceKey)
		if txMgrBucket == nil {
			return errors.New("missing transaction manager namespace")
		}

		addrMgrUpgrader := waddrmgr.NewMigrationManager(addrMgrBucket)
		txMgrUpgrader := wtxmgr.NewMigrationManager(txMgrBucket)
		err := migration.Upgrade(txMgrUpgrader, addrMgrUpgrader)
		if err != nil {
			return err
		}

		addrMgr, err = waddrmgr.Open(addrMgrBucket, pubPass, params)
		if err != nil {
			return err
		}
		txMgr, err = wtxmgr.Open(txMgrBucket, params)
		if err != nil {
			return err
		}

		return nil
	})
	if err != nil {
		return nil, err
	}

	log.Infof("Opened wallet") // TODO: log balance? last sync height?

	w := &Wallet{
		publicPassphrase:    pubPass,
		db:                  db,
		Manager:             addrMgr,
		TxStore:             txMgr,
		lockedOutpoints:     map[wire.OutPoint]struct{}{},
		recoveryWindow:      recoveryWindow,
		rescanAddJob:        make(chan *RescanJob),
		rescanBatch:         make(chan *rescanBatch),
		rescanNotifications: make(chan interface{}),
		rescanProgress:      make(chan *RescanProgressMsg),
		rescanFinished:      make(chan *RescanFinishedMsg),
		createTxRequests:    make(chan createTxRequest),
		unlockRequests:      make(chan unlockRequest),
		lockRequests:        make(chan struct{}),
		holdUnlockRequests:  make(chan chan heldUnlock),
		lockState:           make(chan bool),
		changePassphrase:    make(chan changePassphraseRequest),
		changePassphrases:   make(chan changePassphrasesRequest),
		chainParams:         params,
		quit:                make(chan struct{}),
	}

	w.NtfnServer = newNotificationServer(w)
	w.TxStore.NotifyUnspent = func(hash *chainhash.Hash, index uint32) {
		w.NtfnServer.notifyUnspentOutput(0, hash, index)
	}

	return w, nil
}