lbcwallet/log.go

166 lines
5.1 KiB
Go
Raw Normal View History

/*
* Copyright (c) 2013, 2014 Conformal Systems LLC <info@conformal.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
package main
import (
"fmt"
2014-07-03 13:45:40 +02:00
"os"
"github.com/btcsuite/btclog"
"github.com/btcsuite/btcwallet/chain"
"github.com/btcsuite/btcwallet/txstore"
"github.com/btcsuite/btcwallet/wallet"
"github.com/btcsuite/seelog"
)
const (
// lockTimeThreshold is the number below which a lock time is
// interpreted to be a block number. Since an average of one block
// is generated per 10 minutes, this allows blocks for about 9,512
// years. However, if the field is interpreted as a timestamp, given
// the lock time is a uint32, the max is sometime around 2106.
lockTimeThreshold uint32 = 5e8 // Tue Nov 5 00:53:20 1985 UTC
)
// Loggers per subsytem. Note that backendLog is a seelog logger that all of
// the subsystem loggers route their messages to. When adding new subsystems,
// add a reference here, to the subsystemLoggers map, and the useLogger
// function.
var (
backendLog = seelog.Disabled
log = btclog.Disabled
walletLog = btclog.Disabled
txstLog = btclog.Disabled
Remove account support, fix races on btcd connect. This commit is the result of several big changes being made to the wallet. In particular, the "handshake" (initial sync to the chain server) was quite racy and required proper synchronization. To make fixing this race easier, several other changes were made to the internal wallet data structures and much of the RPC server ended up being rewritten. First, all account support has been removed. The previous Account struct has been replaced with a Wallet structure, which includes a keystore for saving keys, and a txstore for storing relevant transactions. This decision has been made since it is the opinion of myself and other developers that bitcoind accounts are fundamentally broken (as accounts implemented by bitcoind support both arbitrary address groupings as well as moving balances between accounts -- these are fundamentally incompatible features), and since a BIP0032 keystore is soon planned to be implemented (at which point, "accounts" can return as HD extended keys). With the keystore handling the grouping of related keys, there is no reason have many different Account structs, and the AccountManager has been removed as well. All RPC handlers that take an account option will only work with "" (the default account) or "*" if the RPC allows specifying all accounts. Second, much of the RPC server has been cleaned up. The global variables for the RPC server and chain server client have been moved to part of the rpcServer struct, and the handlers for each RPC method that are looked up change depending on which components have been set. Passthrough requests are also no longer handled specially, but when the chain server is set, a handler to perform the passthrough will be returned if the method is not otherwise a wallet RPC. The notification system for websocket clients has also been rewritten so wallet components can send notifications through channels, rather than requiring direct access to the RPC server itself, or worse still, sending directly to a websocket client's send channel. In the future, this will enable proper registration of notifications, rather than unsolicited broadcasts to every connected websocket client (see issue #84). Finally, and the main reason why much of this cleanup was necessary, the races during intial sync with the chain server have been fixed. Previously, when the 'Handshake' was run, a rescan would occur which would perform modifications to Account data structures as notifications were received. Synchronization was provided with a single binary semaphore which serialized all access to wallet and account data. However, the Handshake itself was not able to run with this lock (or else notifications would block), and many data races would occur as both notifications were being handled. If GOMAXPROCS was ever increased beyond 1, btcwallet would always immediately crash due to invalid addresses caused by the data races on startup. To fix this, the single lock for all wallet access has been replaced with mutexes for both the keystore and txstore. Handling of btcd notifications and client requests may now occur simultaneously. GOMAXPROCS has also been set to the number of logical CPUs at the beginning of main, since with the data races fixed, there's no reason to prevent the extra parallelism gained by increasing it. Closes #78. Closes #101. Closes #110.
2014-07-09 05:17:38 +02:00
chainLog = btclog.Disabled
)
// subsystemLoggers maps each subsystem identifier to its associated logger.
var subsystemLoggers = map[string]btclog.Logger{
"BTCW": log,
"WLLT": walletLog,
"TXST": txstLog,
Remove account support, fix races on btcd connect. This commit is the result of several big changes being made to the wallet. In particular, the "handshake" (initial sync to the chain server) was quite racy and required proper synchronization. To make fixing this race easier, several other changes were made to the internal wallet data structures and much of the RPC server ended up being rewritten. First, all account support has been removed. The previous Account struct has been replaced with a Wallet structure, which includes a keystore for saving keys, and a txstore for storing relevant transactions. This decision has been made since it is the opinion of myself and other developers that bitcoind accounts are fundamentally broken (as accounts implemented by bitcoind support both arbitrary address groupings as well as moving balances between accounts -- these are fundamentally incompatible features), and since a BIP0032 keystore is soon planned to be implemented (at which point, "accounts" can return as HD extended keys). With the keystore handling the grouping of related keys, there is no reason have many different Account structs, and the AccountManager has been removed as well. All RPC handlers that take an account option will only work with "" (the default account) or "*" if the RPC allows specifying all accounts. Second, much of the RPC server has been cleaned up. The global variables for the RPC server and chain server client have been moved to part of the rpcServer struct, and the handlers for each RPC method that are looked up change depending on which components have been set. Passthrough requests are also no longer handled specially, but when the chain server is set, a handler to perform the passthrough will be returned if the method is not otherwise a wallet RPC. The notification system for websocket clients has also been rewritten so wallet components can send notifications through channels, rather than requiring direct access to the RPC server itself, or worse still, sending directly to a websocket client's send channel. In the future, this will enable proper registration of notifications, rather than unsolicited broadcasts to every connected websocket client (see issue #84). Finally, and the main reason why much of this cleanup was necessary, the races during intial sync with the chain server have been fixed. Previously, when the 'Handshake' was run, a rescan would occur which would perform modifications to Account data structures as notifications were received. Synchronization was provided with a single binary semaphore which serialized all access to wallet and account data. However, the Handshake itself was not able to run with this lock (or else notifications would block), and many data races would occur as both notifications were being handled. If GOMAXPROCS was ever increased beyond 1, btcwallet would always immediately crash due to invalid addresses caused by the data races on startup. To fix this, the single lock for all wallet access has been replaced with mutexes for both the keystore and txstore. Handling of btcd notifications and client requests may now occur simultaneously. GOMAXPROCS has also been set to the number of logical CPUs at the beginning of main, since with the data races fixed, there's no reason to prevent the extra parallelism gained by increasing it. Closes #78. Closes #101. Closes #110.
2014-07-09 05:17:38 +02:00
"CHNS": chainLog,
}
// logClosure is used to provide a closure over expensive logging operations
// so don't have to be performed when the logging level doesn't warrant it.
type logClosure func() string
// String invokes the underlying function and returns the result.
func (c logClosure) String() string {
return c()
}
// newLogClosure returns a new closure over a function that returns a string
// which itself provides a Stringer interface so that it can be used with the
// logging system.
func newLogClosure(c func() string) logClosure {
return logClosure(c)
}
// useLogger updates the logger references for subsystemID to logger. Invalid
// subsystems are ignored.
func useLogger(subsystemID string, logger btclog.Logger) {
if _, ok := subsystemLoggers[subsystemID]; !ok {
return
}
subsystemLoggers[subsystemID] = logger
switch subsystemID {
case "BTCW":
log = logger
case "WLLT":
walletLog = logger
wallet.UseLogger(logger)
case "TXST":
txstLog = logger
txstore.UseLogger(logger)
Remove account support, fix races on btcd connect. This commit is the result of several big changes being made to the wallet. In particular, the "handshake" (initial sync to the chain server) was quite racy and required proper synchronization. To make fixing this race easier, several other changes were made to the internal wallet data structures and much of the RPC server ended up being rewritten. First, all account support has been removed. The previous Account struct has been replaced with a Wallet structure, which includes a keystore for saving keys, and a txstore for storing relevant transactions. This decision has been made since it is the opinion of myself and other developers that bitcoind accounts are fundamentally broken (as accounts implemented by bitcoind support both arbitrary address groupings as well as moving balances between accounts -- these are fundamentally incompatible features), and since a BIP0032 keystore is soon planned to be implemented (at which point, "accounts" can return as HD extended keys). With the keystore handling the grouping of related keys, there is no reason have many different Account structs, and the AccountManager has been removed as well. All RPC handlers that take an account option will only work with "" (the default account) or "*" if the RPC allows specifying all accounts. Second, much of the RPC server has been cleaned up. The global variables for the RPC server and chain server client have been moved to part of the rpcServer struct, and the handlers for each RPC method that are looked up change depending on which components have been set. Passthrough requests are also no longer handled specially, but when the chain server is set, a handler to perform the passthrough will be returned if the method is not otherwise a wallet RPC. The notification system for websocket clients has also been rewritten so wallet components can send notifications through channels, rather than requiring direct access to the RPC server itself, or worse still, sending directly to a websocket client's send channel. In the future, this will enable proper registration of notifications, rather than unsolicited broadcasts to every connected websocket client (see issue #84). Finally, and the main reason why much of this cleanup was necessary, the races during intial sync with the chain server have been fixed. Previously, when the 'Handshake' was run, a rescan would occur which would perform modifications to Account data structures as notifications were received. Synchronization was provided with a single binary semaphore which serialized all access to wallet and account data. However, the Handshake itself was not able to run with this lock (or else notifications would block), and many data races would occur as both notifications were being handled. If GOMAXPROCS was ever increased beyond 1, btcwallet would always immediately crash due to invalid addresses caused by the data races on startup. To fix this, the single lock for all wallet access has been replaced with mutexes for both the keystore and txstore. Handling of btcd notifications and client requests may now occur simultaneously. GOMAXPROCS has also been set to the number of logical CPUs at the beginning of main, since with the data races fixed, there's no reason to prevent the extra parallelism gained by increasing it. Closes #78. Closes #101. Closes #110.
2014-07-09 05:17:38 +02:00
case "CHNS":
chainLog = logger
chain.UseLogger(logger)
}
}
// initSeelogLogger initializes a new seelog logger that is used as the backend
// for all logging subsytems.
func initSeelogLogger(logFile string) {
config := `
<seelog type="adaptive" mininterval="2000000" maxinterval="100000000"
critmsgcount="500" minlevel="trace">
<outputs formatid="all">
<console />
<rollingfile type="size" filename="%s" maxsize="10485760" maxrolls="3" />
</outputs>
<formats>
<format id="all" format="%%Time %%Date [%%LEV] %%Msg%%n" />
</formats>
</seelog>`
config = fmt.Sprintf(config, logFile)
logger, err := seelog.LoggerFromConfigAsString(config)
if err != nil {
fmt.Fprintf(os.Stderr, "failed to create logger: %v", err)
os.Exit(1)
}
backendLog = logger
}
// setLogLevel sets the logging level for provided subsystem. Invalid
// subsystems are ignored. Uninitialized subsystems are dynamically created as
// needed.
func setLogLevel(subsystemID string, logLevel string) {
// Ignore invalid subsystems.
logger, ok := subsystemLoggers[subsystemID]
if !ok {
return
}
// Default to info if the log level is invalid.
level, ok := btclog.LogLevelFromString(logLevel)
if !ok {
level = btclog.InfoLvl
}
// Create new logger for the subsystem if needed.
if logger == btclog.Disabled {
logger = btclog.NewSubsystemLogger(backendLog, subsystemID+": ")
useLogger(subsystemID, logger)
}
logger.SetLevel(level)
}
// setLogLevels sets the log level for all subsystem loggers to the passed
// level. It also dynamically creates the subsystem loggers as needed, so it
// can be used to initialize the logging system.
func setLogLevels(logLevel string) {
// Configure all sub-systems with the new logging level. Dynamically
// create loggers as needed.
for subsystemID := range subsystemLoggers {
setLogLevel(subsystemID, logLevel)
}
}
// pickNoun returns the singular or plural form of a noun depending
// on the count n.
func pickNoun(n int, singular, plural string) string {
if n == 1 {
return singular
}
return plural
}