2015-12-01 19:44:58 +01:00
|
|
|
// Copyright (c) 2013-2015 The btcsuite developers
|
|
|
|
// Use of this source code is governed by an ISC
|
|
|
|
// license that can be found in the LICENSE file.
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
|
2015-04-02 20:13:38 +02:00
|
|
|
package wallet
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
|
|
|
|
import (
|
2017-07-12 01:13:10 +02:00
|
|
|
"bytes"
|
|
|
|
|
2017-06-06 02:54:35 +02:00
|
|
|
"github.com/roasbeef/btcd/txscript"
|
|
|
|
"github.com/roasbeef/btcwallet/chain"
|
|
|
|
"github.com/roasbeef/btcwallet/waddrmgr"
|
|
|
|
"github.com/roasbeef/btcwallet/walletdb"
|
|
|
|
"github.com/roasbeef/btcwallet/wtxmgr"
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
)
|
|
|
|
|
|
|
|
func (w *Wallet) handleChainNotifications() {
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
chainClient, err := w.requireChainClient()
|
|
|
|
if err != nil {
|
|
|
|
log.Errorf("handleChainNotifications called without RPC client")
|
|
|
|
w.wg.Done()
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
2015-02-19 21:01:22 +01:00
|
|
|
sync := func(w *Wallet) {
|
|
|
|
// At the moment there is no recourse if the rescan fails for
|
|
|
|
// some reason, however, the wallet will not be marked synced
|
|
|
|
// and many methods will error early since the wallet is known
|
|
|
|
// to be out of date.
|
|
|
|
err := w.syncWithChain()
|
|
|
|
if err != nil && !w.ShuttingDown() {
|
|
|
|
log.Warnf("Unable to synchronize wallet to chain: %v", err)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-09-21 23:14:55 +02:00
|
|
|
catchUpHashes := func(w *Wallet, client chain.Interface,
|
|
|
|
height int32) error {
|
|
|
|
// TODO(aakselrod): There's a race conditon here, which
|
|
|
|
// happens when a reorg occurs between the
|
|
|
|
// rescanProgress notification and the last GetBlockHash
|
|
|
|
// call. The solution when using btcd is to make btcd
|
|
|
|
// send blockconnected notifications with each block
|
|
|
|
// the way Neutrino does, and get rid of the loop. The
|
|
|
|
// other alternative is to check the final hash and,
|
|
|
|
// if it doesn't match the original hash returned by
|
|
|
|
// the notification, to roll back and restart the
|
|
|
|
// rescan.
|
|
|
|
log.Infof("Catching up block hashes to height %d, this"+
|
|
|
|
" might take a while", height)
|
|
|
|
err := walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
|
|
|
|
ns := tx.ReadWriteBucket(waddrmgrNamespaceKey)
|
|
|
|
startBlock := w.Manager.SyncedTo()
|
|
|
|
for i := startBlock.Height + 1; i <= height; i++ {
|
|
|
|
hash, err := client.GetBlockHash(int64(i))
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
bs := waddrmgr.BlockStamp{
|
|
|
|
Height: i,
|
|
|
|
Hash: *hash,
|
|
|
|
}
|
|
|
|
err = w.Manager.SetSyncedTo(ns, &bs)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return nil
|
|
|
|
})
|
|
|
|
if err != nil {
|
|
|
|
log.Errorf("Failed to update address manager "+
|
|
|
|
"sync state for height %d: %v", height, err)
|
|
|
|
}
|
|
|
|
log.Info("Done catching up block hashes")
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
for n := range chainClient.Notifications() {
|
2017-01-17 01:19:02 +01:00
|
|
|
var notificationName string
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
var err error
|
|
|
|
switch n := n.(type) {
|
2015-02-19 21:01:22 +01:00
|
|
|
case chain.ClientConnected:
|
|
|
|
go sync(w)
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
case chain.BlockConnected:
|
2017-01-17 01:19:02 +01:00
|
|
|
err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
|
|
|
|
return w.connectBlock(tx, wtxmgr.BlockMeta(n))
|
|
|
|
})
|
|
|
|
notificationName = "blockconnected"
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
case chain.BlockDisconnected:
|
2017-01-17 01:19:02 +01:00
|
|
|
err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
|
|
|
|
return w.disconnectBlock(tx, wtxmgr.BlockMeta(n))
|
|
|
|
})
|
|
|
|
notificationName = "blockdisconnected"
|
2015-04-06 21:03:24 +02:00
|
|
|
case chain.RelevantTx:
|
2017-01-17 01:19:02 +01:00
|
|
|
err = walletdb.Update(w.db, func(tx walletdb.ReadWriteTx) error {
|
|
|
|
return w.addRelevantTx(tx, n.TxRecord, n.Block)
|
|
|
|
})
|
|
|
|
notificationName = "recvtx/redeemingtx"
|
2017-05-21 04:36:40 +02:00
|
|
|
case chain.FilteredBlockConnected:
|
|
|
|
// Atomically update for the whole block.
|
2017-07-13 03:33:45 +02:00
|
|
|
if len(n.RelevantTxs) > 0 {
|
|
|
|
err = walletdb.Update(w.db, func(
|
|
|
|
tx walletdb.ReadWriteTx) error {
|
|
|
|
var err error
|
|
|
|
for _, rec := range n.RelevantTxs {
|
|
|
|
err = w.addRelevantTx(tx, rec,
|
|
|
|
n.Block)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
2017-05-21 04:36:40 +02:00
|
|
|
}
|
2017-07-13 03:33:45 +02:00
|
|
|
return nil
|
|
|
|
})
|
|
|
|
}
|
|
|
|
notificationName = "filteredblockconnected"
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
|
2017-09-21 23:14:55 +02:00
|
|
|
// The following require some database maintenance, but also
|
|
|
|
// need to be reported to the wallet's rescan goroutine.
|
|
|
|
case *chain.RescanProgress:
|
|
|
|
err = catchUpHashes(w, chainClient, n.Height)
|
|
|
|
notificationName = "rescanprogress"
|
|
|
|
w.rescanNotifications <- n
|
|
|
|
case *chain.RescanFinished:
|
|
|
|
err = catchUpHashes(w, chainClient, n.Height)
|
|
|
|
notificationName = "rescanprogress"
|
|
|
|
w.SetChainSynced(true)
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
w.rescanNotifications <- n
|
|
|
|
}
|
|
|
|
if err != nil {
|
2017-01-17 01:19:02 +01:00
|
|
|
log.Errorf("Failed to process consensus server notification "+
|
|
|
|
"(name: `%s`, detail: `%v`)", notificationName, err)
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
w.wg.Done()
|
|
|
|
}
|
|
|
|
|
|
|
|
// connectBlock handles a chain server notification by marking a wallet
|
|
|
|
// that's currently in-sync with the chain server as being synced up to
|
|
|
|
// the passed block.
|
2017-01-17 01:19:02 +01:00
|
|
|
func (w *Wallet) connectBlock(dbtx walletdb.ReadWriteTx, b wtxmgr.BlockMeta) error {
|
|
|
|
addrmgrNs := dbtx.ReadWriteBucket(waddrmgrNamespaceKey)
|
|
|
|
|
2015-06-18 18:29:13 +02:00
|
|
|
bs := waddrmgr.BlockStamp{
|
|
|
|
Height: b.Height,
|
|
|
|
Hash: b.Hash,
|
|
|
|
}
|
2017-01-17 01:19:02 +01:00
|
|
|
err := w.Manager.SetSyncedTo(addrmgrNs, &bs)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
2014-10-29 07:43:29 +01:00
|
|
|
}
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
// Notify interested clients of the connected block.
|
2017-01-17 01:19:02 +01:00
|
|
|
//
|
|
|
|
// TODO: move all notifications outside of the database transaction.
|
|
|
|
w.NtfnServer.notifyAttachedBlock(dbtx, &b)
|
|
|
|
return nil
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
// disconnectBlock handles a chain server reorganize by rolling back all
|
|
|
|
// block history from the reorged block for a wallet in-sync with the chain
|
|
|
|
// server.
|
2017-01-17 01:19:02 +01:00
|
|
|
func (w *Wallet) disconnectBlock(dbtx walletdb.ReadWriteTx, b wtxmgr.BlockMeta) error {
|
|
|
|
addrmgrNs := dbtx.ReadWriteBucket(waddrmgrNamespaceKey)
|
|
|
|
txmgrNs := dbtx.ReadWriteBucket(wtxmgrNamespaceKey)
|
|
|
|
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
if !w.ChainSynced() {
|
2015-04-17 22:12:04 +02:00
|
|
|
return nil
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
}
|
|
|
|
|
2017-07-12 01:13:10 +02:00
|
|
|
// Disconnect the removed block and all blocks after it if we know about
|
|
|
|
// the disconnected block. Otherwise, the block is in the future.
|
|
|
|
if b.Height <= w.Manager.SyncedTo().Height {
|
|
|
|
hash, err := w.Manager.BlockHash(addrmgrNs, b.Height)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
if bytes.Equal(hash[:], b.Hash[:]) {
|
|
|
|
bs := waddrmgr.BlockStamp{
|
|
|
|
Height: b.Height - 1,
|
|
|
|
}
|
|
|
|
hash, err = w.Manager.BlockHash(addrmgrNs, bs.Height)
|
2015-04-17 22:12:04 +02:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
2017-07-12 01:13:10 +02:00
|
|
|
b.Hash = *hash
|
|
|
|
err = w.Manager.SetSyncedTo(addrmgrNs, &bs)
|
2015-05-14 20:00:07 +02:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
2017-07-12 01:13:10 +02:00
|
|
|
err = w.TxStore.Rollback(txmgrNs, b.Height)
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
// Notify interested clients of the disconnected block.
|
|
|
|
w.NtfnServer.notifyDetachedBlock(&b.Hash)
|
|
|
|
|
2015-04-17 22:12:04 +02:00
|
|
|
return nil
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
}
|
|
|
|
|
2017-01-17 01:19:02 +01:00
|
|
|
func (w *Wallet) addRelevantTx(dbtx walletdb.ReadWriteTx, rec *wtxmgr.TxRecord, block *wtxmgr.BlockMeta) error {
|
|
|
|
addrmgrNs := dbtx.ReadWriteBucket(waddrmgrNamespaceKey)
|
|
|
|
txmgrNs := dbtx.ReadWriteBucket(wtxmgrNamespaceKey)
|
2015-04-06 21:03:24 +02:00
|
|
|
|
|
|
|
// At the moment all notified transactions are assumed to actually be
|
|
|
|
// relevant. This assumption will not hold true when SPV support is
|
|
|
|
// added, but until then, simply insert the transaction because there
|
|
|
|
// should either be one or more relevant inputs or outputs.
|
2017-01-17 01:19:02 +01:00
|
|
|
err := w.TxStore.InsertTx(txmgrNs, rec, block)
|
2015-04-06 21:03:24 +02:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
// Check every output to determine whether it is controlled by a wallet
|
|
|
|
// key. If so, mark the output as a credit.
|
|
|
|
for i, output := range rec.MsgTx.TxOut {
|
|
|
|
_, addrs, _, err := txscript.ExtractPkScriptAddrs(output.PkScript,
|
2015-04-02 20:13:38 +02:00
|
|
|
w.chainParams)
|
2015-04-06 21:03:24 +02:00
|
|
|
if err != nil {
|
|
|
|
// Non-standard outputs are skipped.
|
|
|
|
continue
|
|
|
|
}
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
for _, addr := range addrs {
|
2017-01-17 01:19:02 +01:00
|
|
|
ma, err := w.Manager.Address(addrmgrNs, addr)
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
if err == nil {
|
2015-04-06 21:03:24 +02:00
|
|
|
// TODO: Credits should be added with the
|
|
|
|
// account they belong to, so wtxmgr is able to
|
|
|
|
// track per-account balances.
|
2017-01-17 01:19:02 +01:00
|
|
|
err = w.TxStore.AddCredit(txmgrNs, rec, block, uint32(i),
|
2015-04-06 21:03:24 +02:00
|
|
|
ma.Internal())
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
2017-01-17 01:19:02 +01:00
|
|
|
err = w.Manager.MarkUsed(addrmgrNs, addr)
|
2015-04-06 21:03:24 +02:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
log.Debugf("Marked address %v used", addr)
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
continue
|
|
|
|
}
|
2015-04-06 21:03:24 +02:00
|
|
|
|
|
|
|
// Missing addresses are skipped. Other errors should
|
|
|
|
// be propagated.
|
2015-05-28 00:21:17 +02:00
|
|
|
if !waddrmgr.IsError(err, waddrmgr.ErrAddressNotFound) {
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
// Send notification of mined or unmined transaction to any interested
|
|
|
|
// clients.
|
|
|
|
//
|
|
|
|
// TODO: Avoid the extra db hits.
|
|
|
|
if block == nil {
|
2017-01-17 01:19:02 +01:00
|
|
|
details, err := w.TxStore.UniqueTxDetails(txmgrNs, &rec.Hash, nil)
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
if err != nil {
|
2018-02-14 06:36:39 +01:00
|
|
|
log.Errorf("Cannot query transaction details for notification: %v", err)
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
} else {
|
2017-01-17 01:19:02 +01:00
|
|
|
w.NtfnServer.notifyUnminedTransaction(dbtx, details)
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
}
|
|
|
|
} else {
|
2017-01-17 01:19:02 +01:00
|
|
|
details, err := w.TxStore.UniqueTxDetails(txmgrNs, &rec.Hash, &block.Block)
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
if err != nil {
|
2018-02-14 06:36:39 +01:00
|
|
|
log.Errorf("Cannot query transaction details for notification: %v", err)
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
} else {
|
2017-01-17 01:19:02 +01:00
|
|
|
w.NtfnServer.notifyMinedTransaction(dbtx, details, block)
|
Modernize the RPC server.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
2015-06-01 21:57:50 +02:00
|
|
|
}
|
|
|
|
}
|
Remove account support, fix races on btcd connect.
This commit is the result of several big changes being made to the
wallet. In particular, the "handshake" (initial sync to the chain
server) was quite racy and required proper synchronization. To make
fixing this race easier, several other changes were made to the
internal wallet data structures and much of the RPC server ended up
being rewritten.
First, all account support has been removed. The previous Account
struct has been replaced with a Wallet structure, which includes a
keystore for saving keys, and a txstore for storing relevant
transactions. This decision has been made since it is the opinion of
myself and other developers that bitcoind accounts are fundamentally
broken (as accounts implemented by bitcoind support both arbitrary
address groupings as well as moving balances between accounts -- these
are fundamentally incompatible features), and since a BIP0032 keystore
is soon planned to be implemented (at which point, "accounts" can
return as HD extended keys). With the keystore handling the grouping
of related keys, there is no reason have many different Account
structs, and the AccountManager has been removed as well. All RPC
handlers that take an account option will only work with "" (the
default account) or "*" if the RPC allows specifying all accounts.
Second, much of the RPC server has been cleaned up. The global
variables for the RPC server and chain server client have been moved
to part of the rpcServer struct, and the handlers for each RPC method
that are looked up change depending on which components have been set.
Passthrough requests are also no longer handled specially, but when
the chain server is set, a handler to perform the passthrough will be
returned if the method is not otherwise a wallet RPC. The
notification system for websocket clients has also been rewritten so
wallet components can send notifications through channels, rather than
requiring direct access to the RPC server itself, or worse still,
sending directly to a websocket client's send channel. In the future,
this will enable proper registration of notifications, rather than
unsolicited broadcasts to every connected websocket client (see
issue #84).
Finally, and the main reason why much of this cleanup was necessary,
the races during intial sync with the chain server have been fixed.
Previously, when the 'Handshake' was run, a rescan would occur which
would perform modifications to Account data structures as
notifications were received. Synchronization was provided with a
single binary semaphore which serialized all access to wallet and
account data. However, the Handshake itself was not able to run with
this lock (or else notifications would block), and many data races
would occur as both notifications were being handled. If GOMAXPROCS
was ever increased beyond 1, btcwallet would always immediately crash
due to invalid addresses caused by the data races on startup. To fix
this, the single lock for all wallet access has been replaced with
mutexes for both the keystore and txstore. Handling of btcd
notifications and client requests may now occur simultaneously.
GOMAXPROCS has also been set to the number of logical CPUs at the
beginning of main, since with the data races fixed, there's no reason
to prevent the extra parallelism gained by increasing it.
Closes #78.
Closes #101.
Closes #110.
2014-07-09 05:17:38 +02:00
|
|
|
|
|
|
|
return nil
|
|
|
|
}
|