This changes the database access APIs and each of the "manager"
packages (waddrmgr/wstakemgr) so that transactions are opened (only)
by the wallet package and the namespace buckets that each manager
expects to operate on are passed in as parameters.
This helps improve the atomicity situation as it means that many
calls to these APIs can be grouped together into a single
database transaction.
This change does not attempt to completely fix the "half-processed"
block problem. Mined transactions are still added to the wallet
database under their own database transaction as this is how they are
notified by the consensus JSON-RPC server (as loose transactions,
without the rest of the block that contains them). It will make
updating to a fixed notification model significantly easier, as the
same "manager" APIs can still be used, but grouped into a single
atomic transaction.
Remove the addresses field from TransactionDetails.Output. It is
assumed that the caller is able to deserialize the transaction and
encode the output scripts to addresses, so this is unnecessary server
overhead and conflicts with the current API philosophy of not
duplicating data already included in another field.
Since there is no additional data included for outputs not controlled
by the wallet, remove the `mine` specifier from the Output message and
replace it with an output index. Only include messages for controlled
outputs, rather than creating messages for both controlled and
uncontrolled outputs. Rename the repeated field from `outputs` to
`credits` to be consistent with the `debits` field.
Bump major API version as this is a breaking change.
Closes#408.
This commit enabled the wallet to properly spend nested and normal
p2wkh outputs under its control.
For regular p2wkh outputs, spending simply involves presenting the
original pub key, and signature as the witness data.
For nested p2wkh outputs, in addition to the above, the version zero
witness p2wkh witness program is placed in the sigScript in order to
allow clients who are aware of BIP 16 to validate the witness spend.
When spending a segwit output, the wallet also needs the input value of
the previous output script. Therefore when selecting outputs the input
value is now returned. Additionally when validating newly signed
outputs the input value as also passed into `txscript.Engine`
Previously, this would not increment the spendable balance for matured
coinbase outputs and would only increment the immature balance if the
output was still immature.
This updates both btcsuite and external dependencies to their latest
versions. In particular, gRPC was updated to version 1.0.3 and bolt
to 1.3.0.
The walletrpc package needed to be regenerated for the gRPC update.
While here, update the Travis-CI script so this can be tested there.
Since the coinbase maturity is now allowed to be defined per chain and
the old blockchain.CoinbaseMaturity constant has been removed, this
updates the code accordingly.
Also, update glide.lock to use the required version of btcd.
This updates all code to make use of the new chainhash package since the
old wire.ShaHash type and related functions have been removed in favor
of the abstracted package.
Also, while here, rename all variables that included sha in their name
to include hash instead.
Finally, update glide.lock to use the required version of btcd, btcutil,
and btcrpcclient.
Remove the addresses field from TransactionDetails.Output. It is
assumed that the caller is able to deserialize the transaction and
encode the output scripts to addresses, so this is unnecessary server
overhead and conflicts with the current API philosophy of not
duplicating data already included in another field.
Since there is no additional data included for outputs not controlled
by the wallet, remove the `mine` specifier from the Output message and
replace it with an output index. Only include messages for controlled
outputs, rather than creating messages for both controlled and
uncontrolled outputs. Rename the repeated field from `outputs` to
`credits` to be consistent with the `debits` field.
Bump major API version as this is a breaking change.
Closes#408.
Due to the way dust is calculated, if the transaction relay fee is
zero, then a zero output amount is not considered dust. As the
transaction authoring code used this dust check to determine whether a
change output can be included or not, it could create unnecessary
change outputs which return no value back to the wallet. Prevent this
by including an explicit check for zero values.
This commit corrects various things found by the static checkers
(comments, unkeyed fields, return after some if/else).
Add generated files and legacy files to the whitelist to be ignored.
Catch .travis.yml up with btcd so goclean can be run.
This changes the wallet.Open function signature to remove the database
namespace parameters. This is done so that the wallet package itself
is responsible for the location and opening of these namespaces from
the database, rather than requiring the caller to open these ahead of
time.
A new wallet.Create function has also been added. This function
initializes a new wallet in an empty database, using the same
namespaces as wallet.Open will eventually use. This relieves the
caller from needing to manage wallet database namespaces explicitly.
Fixes#397.
These notifications were added to support real time updates for
btcgui. As the btcgui project is no longer being developed, there are
no more consumers of this API, and it makes sense to remove them given
their various issues (the largest being that notifiations are sent
unsubscribed to clients that may never be interrested in them).
A new notification server has already been added to the wallet package
to handle notifications in a RPC-server agnostic way. This server is
the means by which the wallet notifies changes for gRPC clients. If
per-client registered notifications are to be re-added for the
JSON-RPC server, they should be integrated with the new notification
server rather than using this legacy code.
This corrects and simplifies the shutdown logic for interrupts, the
walletrpc.WalletLoaderService/CloseWallet RPC, and the legacy stop RPC
by both stopping all wallet processes and closing the wallet database.
It appears that this behavior broke as part of the wallet package
refactor, causing occasional nil pointer panics and memory faults when
closing the wallet database with active transactions.
Fixes#282.
Fixes#283.
This began as a change to improve the fee calculation code and evolved
into a much larger refactor which improves the readability and
modularity of all of the transaction creation code.
Transaction fee calculations have been switched from full increments
of the relay fee to a proportion based on the transaction size. This
means that for a relay fee of 1e3 satoshis/kB, a 500 byte transaction
is only required to pay a 5e2 satoshi fee and a 1500 byte transaction
only need pay a 1.5e3 fee. The previous code would end up estimating
these fees to be 1e3 and 2e3 respectively.
Because the previous code would add more fee than needed in almost
every case, the transaction size estimations were optimistic
(best/smallest case) and signing was done in a loop where the fee was
incremented by the relay fee again each time the actual size of the
signed transaction rendered the fee too low. This has switched to
using worst case transaction size estimates rather than best case, and
signing is only performed once.
Transaction input signature creation has switched from using
txscript.SignatureScript to txscript.SignTxOutput. The new API is
able to redeem outputs other than just P2PKH, so the previous
restrictions about P2SH outputs being unspendable (except through the
signrawtransaction RPC) no longer hold.
Several new public packages have been added:
wallet/txauthor - transaction authoring and signing
wallet/txfees - fee estimations and change output inclusion
wallet/txrules - simple consensus and mempool policy rule checks
Along with some internal packages:
wallet/internal/txsizes - transaction size estimation
internal/helpers - context free convenience functions
The txsizes package is internal as the estimations it provides are
specific for the algorithms used by these new packages.
Previously, when creating a change address during the process of
creating a new transaction an error case would be hit in the waddrmgr
triggered by attempting to derive a new internal address from under a
waddrmgr.ImportedAddrAccount. To remedy this error, we now use the
default account for change when spending outputs from an imported
key. This approach allows funds under the control of imported
private keys to be protected under the wallet's seed as soon as
they've been partially spent.
Previously, if a nil seed was passed into loader.CreateNewWallet, a
random seed was never generated. This would cause an error within the
waddrmgr due to the seed being of invalid (0) length.
This is a rather monolithic commit that moves the old RPC server to
its own package (rpc/legacyrpc), introduces a new RPC server using
gRPC (rpc/rpcserver), and provides the ability to defer wallet loading
until request at a later time by an RPC (--noinitialload).
The legacy RPC server remains the default for now while the new gRPC
server is not enabled by default. Enabling the new server requires
setting a listen address (--experimenalrpclisten). This experimental
flag is used to effectively feature gate the server until it is ready
to use as a default. Both RPC servers can be run at the same time,
but require binding to different listen addresses.
In theory, with the legacy RPC server now living in its own package it
should become much easier to unit test the handlers. This will be
useful for any future changes to the package, as compatibility with
Core's wallet is still desired.
Type safety has also been improved in the legacy RPC server. Multiple
handler types are now used for methods that do and do not require the
RPC client as a dependency. This can statically help prevent nil
pointer dereferences, and was very useful for catching bugs during
refactoring.
To synchronize the wallet loading process between the main package
(the default) and through the gRPC WalletLoader service (with the
--noinitialload option), as well as increasing the loose coupling of
packages, a new wallet.Loader type has been added. All creating and
loading of existing wallets is done through a single Loader instance,
and callbacks can be attached to the instance to run after the wallet
has been opened. This is how the legacy RPC server is associated with
a loaded wallet, even after the wallet is loaded by a gRPC method in a
completely unrelated package.
Documentation for the new RPC server has been added to the
rpc/documentation directory. The documentation includes a
specification for the new RPC API, addresses how to make changes to
the server implementation, and provides short example clients in
several different languages.
Some of the new RPC methods are not implementated exactly as described
by the specification. These are considered bugs with the
implementation, not the spec. Known bugs are commented as such.
This change introduces additional network activity with the btcd
process to ensure that the network connection is not silently dropped.
Previously, if the connection was lost (e.g. wallet runs on a laptop
and connects to remote btcd, and the laptop is suspended/resumed) the
lost connection would not be detectable since all normal RPC activity
(excluding requests from btcwallet to btcd made by the user) is in the
direction of btcd to wallet in the form of websocket notifications.
sync.Locker cannot be safely used to switch a sync.Mutex to a noop
locker since other goroutines that attempt to lock the mutex will race
on the changing interface. Instead, just statically dispatch
sync.Mutex methods.
Rather than the main package being responsible for opening the address
and transaction managers, the namespaces of these components are
passed as parameters to the wallet.Open function.
Additionally, the address manager Options struct has been split into
two: ScryptOptions which holds the scrypt parameters needed during
passphrase key derivation, and OpenCallbacks which is only passed to
the Open function to allow the caller to provide additional details
during upgrades.
These changes are being done in preparation for a notification server
in the wallet package, with callbacks passed to the Open and Create
functions in waddrmgr and wtxmgr. Before this could happen, the
wallet package had to be responsible for actually opening the managers
from their namespaces.
If a long reorganize occurs farther back than the last saved recent
block hash (currently max 20 are saved) a full rescan is triggered
since there is no guarantee the previous blocks weren't also removed
in the reorg. In this case, the address manager was set unsynced, but
transaction history was not rolled back as well. This commit corrects
this by unconfirming all transactions but those in the genesis block.
