This change is the result of using the errcheck tool
(https://github.com/kisielk/errcheck) to find all unchecked errors,
both unassigned and those assigned to the blank identifier.
Every returned error is now handled in some manner. These include:
- Logging errors that would otherwise be missed
- Returning errors to the caller for further processing
- Checking error values to determine what to do next
- Panicking for truely exceptional "impossible" errors
On the subject of panics, they are a sharp tool and should be used
sparingly. That being said, I have added them to check errors that
were previously explicitly ignored, because they were expected to
always return without failure. This could be due to fake error paths
(i.e. writing to a bytes.Buffer panics for OOM and should never return
an error) or previous logic asserts that an error case is impossible.
Rather than leaving these unhandled and letting code fail later,
either with incorrect results or a nil pointer dereference, it now
produces a stack trace at the error emit site, which I find far more
useful when debugging.
While here, a bunch of dead code was removed, including code to move
pre-0.1.1 uxto and transaction history account files to the new
directory (as they would be unreadable anyways) and a big chunk of
commented out rpcclient code.
This is an intial pass at converting the btcwallet and deps codebases
to pass a network by their parameters, rather than by a magic number
to identify the network. The parameters in params.go have been
updated to embed a *btcnet.Params, and all previous uses of cfg.Net()
have been replaced with activeNet.{Params,Net} (where activeNet is
the global var for the active network).
Although dependancy packages have not yet been updated from using
btcwire.BitcoinNet to btcnet.Params, the parameters are now accessible
at all callsites, and individual packages can be updated to use btcnet
without requiring updates in each external btc* package at once.
While here, the exported API for btcwallet internal library packages
(txstore and wallet) have been updated to pass full network parameters
rather than the btcwire definition of a network.
The last transaction store was a great example of how not to write
scalable software. For a variety of reasons, it was very slow at
processing transaction inserts. Among them:
1) Every single transaction record being saved in a linked list
(container/list), and inserting into this list would be an O(n)
operation so that records could be ordered by receive date.
2) Every single transaction in the above mentioned list was iterated
over in order to find double spends which must be removed. It is
silly to do this check for mined transactions, which already have
been checked for this by btcd. Worse yet, if double spends were
found, the list would be iterated a second (or third, or fourth)
time for each removed transaction.
3) All spend tracking for signed-by-wallet transactions was found on
each transaction insert, even if the now spent previous transaction
outputs were known by the caller.
This list could keep going on, but you get the idea. It was bad.
To resolve these issues a new transaction store had to be implemented.
The new implementation:
1) Tracks mined and unmined transactions in different data structures.
Mined transactions are cheap to track because the required double
spend checks have already been performed by the chain server, and
double spend checks are only required to be performed on
newly-inserted mined transactions which may conflict with previous
unmined transactions.
2) Saves mined transactions grouped by block first, and then by their
transaction index. Lookup keys for mined transactions are simply
the block height (in the best chain, that's all we save) and index
of the transaction in the block. This makes looking up any
arbitrary transaction almost an O(1) operation (almost, because
block height and block indexes are mapped to their slice indexes
with a Go map).
3) Saves records in each transaction for whether the outputs are
wallet credits (spendable by wallet) and for whether inputs debit
from previous credits. Both structures point back to the source
or spender (credits point to the transaction that spends them, or
nil for unspent credits, and debits include keys to lookup the
transaction credits they spent. While complicated to keep track
of, this greatly simplifies the spent tracking for transactions
across rollbacks and transaction removals.
4) Implements double spend checking as an almost O(1) operation. A
Go map is used to map each previous outpoint for all unconfirmed
transactions to the unconfirmed tx record itself. Checking for
double spends on confirmed transaction inserts only involves
looking up each previous outpoint of the inserted tx in this map.
If a double spend is found, removal is simplified by only
removing the transaction and its spend chain from store maps,
rather than iterating a linked list several times over to remove
each dead transaction in the spend chain.
5) Allows the caller to specify the previous credits which are spent
by a debiting transaction. When a transaction is created by
wallet, the previous outputs are already known, and by passing
their record types to the AddDebits method, lookups for each
previously unspent credit are omitted.
6) Bookkeeps all blocks with transactions with unspent credits, and
bookkeeps the transaction indexes of all transactions with unspent
outputs for a single block. For the case where the caller adding a
debit record does not know what credits a transaction debits from,
these bookkeeping structures allow the store to only consider known
unspent transactions, rather than searching through both spent and
unspents.
7) Saves amount deltas for the entire balance as a result of each
block, due to transactions within that block. This improves the
performance of calculating the full balance by not needing to
iterate over every transaction, and then every credit, to determine
if a credit is spent or unspent. When transactions are moved from
unconfirmed to a block structure, the amount deltas are incremented
by the amount of all transaction credits (both spent and unspent)
and debited by the total amount the transaction spends from
previous wallet credits. For the common case of calculating a
balance with just one confirmation, the only involves iterating
over each block structure and adding the (possibly negative)
amount delta. Coinbase rewards are saved similarly, but with a
different amount variable so they can be seperatly included or
excluded.
Due to all of the changes in how the store internally works, the
serialization format has changed. To simplify the serialization
logic, support for reading the last store file version has been
removed. Past this change, a rescan (run automatically) will be
required to rebuild the transaction history.
- Move the MarkAddresForAccount and LookupAccountByAddress functionality
into account maanger.
- Move the wallet opeing logic into account manager (the only place that calls
it) and unexport.
- Move accountHandler to using a single channel for commands. Many of
the commands have ordering restraints (add account, list all accounts,
remove account, access account, mark account for address) which are very
much undefined with the multi-channel model.
- Rework all callers of LookupAccountByAddress to get the account structure
directly.
This change adds a notification handler for the new rescanprogress
notification and takes advantage of the recent rescan manager and
partial syncing support to mark addresses as partially synced. If the
network connection to btcd is lost or wallet is restarted during a
rescan, a new rescan will start at the earliest block height for any
wallet address, taking partial syncs into consideration.
The private key import codepath (called when handling the
importprivkey RPC method) was not triggering rescans for the imported
address. This change begins a new rescan for each import and adds
additional logic to the wallet file to keep track of unsynced imported
addresses. After a rescan on an imported address completes, the
address is marked as in sync with the rest of wallet and future
handshake rescans will start from the last seen block, rather than the
import height of the unsynced address.
While here, improve the logging for not just import rescans, but
rescanning on btcd connect (part of the handshake) as well.
Fixes#74.
Notifications ariving from btcd were being reordered (each handled by
its own goroutine, rather then being always sent in the order they
originated). This was breaking the new transaction store by inserting
transaction records in an 'impossible' manner, that is, inserting txs
without block info after the store already held records of the same tx
with block info, without first performing a rollback.
This is handled by the transaction store insert methods by checking
for identical transactions (double spends with the same tx sha), but
where the block heights mismatch and the new record does not have a
block set. The error is returned all the way up to the goroutine
running each rpc request/notification handler, and if hit, the btcd
connection is closed and all accounts are reopened from disk. This is
not optimal, but it allows us to use the connect logic to correctly
catch us up to the best chain with the last good state of all accounts
while only rescanning a few blocks.
Fixes#72.
This change replaces the old transaction store file format and
implementation. The most important change is how the full backing
transactions for any received or sent transaction are now saved,
rather than simply saving parsed-out details of the tx (tx shas, block
height/hash, pkScripts, etc.).
To support the change, notifications for received transaction outputs
and txs spending watched outpoints have been updated to use the new
redeemingtx and recvtx notifications as these contain the full tx,
which is deserializead and inserted into the store.
The old transaction store serialization code is completely removed, as
updating to the new format automatically cannot be done. Old wallets
first running past this change will error reading the file and start a
full rescan to rebuild the data. Unlike previous rescan code,
transactions spending outpoint managed by wallet are also included.
This results in recovering not just received history, but history for
sent transactions as well.
This change removes the three separate mutexes which used to lock an
account's wallet, tx store, and utxo store. Accounts no longer
contain any locking mechanism and rely on go's other synchronization
constructs (goroutines and channels) for correct access.
All accounts are now managed as a collection through the new
AccountManager, rather than the old AccountStore. AccountManager runs
as its own goroutine to provide access to accounts.
RPC requests are now queued for handling, being denied if the queue
buffer is exhausted. Notifications are also queued (instead of being
sent from their own goroutine after being received, in which order is
undefined), however, notifications are never dropped and will
potentially grow a queue of infinite size if unhandled.
