This PR moves any address notifications outside of the
db transaction that creates them. This is known to have
resulted in deadlocks, since chainClient.NotifyReceived
could block the db transaction from committing.
Doing so also prevents the situation where we send
notifications about the new addresses, but the db txn
fails to commit and the addresses are in fact never
created.
This commit adds rescanWithTarget, in order to facilitate
rescans beginning a certain height. This is done as a
precursor to fixing a bug in the initial sync, that would
cause us to miss relevant txns if they are confirmed before
starting the initial rescan.
In this commit, we alter the behavior for handling chain notifications
within the wallet. The previous code would assume that the channel would
close, but due to now using a ConcurrentQueue to handle notifications,
this assumption no longer stands. Now, we'll stop handling notifications
either once the wallet has or stopped or once the notifications channel
has been closed.
In this commit, ensure that upon restart, if any of the full-node based
backends we support reject the transaction, then we'll properly remove
the now invalid transaction from the tx store. Before this commit, we
could miss a few errors from bitcoind. To remedy this, we explicitly
catch those errors, but then also attempt to precisely catch the set of
generic json RPC errors that can be returned.
In this commit, we fix a bug introduced in an earlier commit. Before
this commit, we would *always* remove an unmined transaction if it
failed to be accepted by the network upon restart. Instead, we should
only remove transaction that are actually due to us trying to spend an
output that’s already spent, or an orphan transaction.
In this commit, we extend the PublishTransction method to be a more
general semi reliable transaction broadcast mechanism. We do this by
removing the special casing for neutrino. With this change, we’ll
_always_ write any transactions to be broadcast to disk. A side effect
of this, is that if the transaction doesn’t *directly* involve any
outputs we control, then it’ll linger around until a restart, when we
try to rebroadcast, and observe that it has bene rejected.
This commit makes use of the recently added EstimateVirtualSize
method to estimated the size of a transaction when calculating
fees. This makes fee estimation more accurate when we are spending
segwit outputs, as before we wouldn't account for the witness
descount, resulting in overshooting fee estimates.
This commit adds a new method EstimateVirtualSize that calculates
the worst case estimate vsize for a transaction with a given set
of inputs and outputs. This method is aware of P2PKH, P2WPKH and
P2SH-P2WPKH inputs, and caulculates the transaction vsize with
the witness data included.
In this commit, we do away with the internal relayFee all together.
Instead, we’ll pass in the fee rate when we’re crafting any
transactions. This allows the caller to manually dictate their desired
fee rate.
This commit makes sure the wallet db is closed if the call to
open the wallet fails, as subsequent calls to OpenExistingWallet
would fail to open the already open database.
During the time of initial block hash catch-up, it is possible to
request an address be generated. This commit updates the active
addresses by calling `w.activeData` after the catch-up is complete.
This changes the database access APIs and each of the "manager"
packages (waddrmgr/wstakemgr) so that transactions are opened (only)
by the wallet package and the namespace buckets that each manager
expects to operate on are passed in as parameters.
This helps improve the atomicity situation as it means that many
calls to these APIs can be grouped together into a single
database transaction.
This change does not attempt to completely fix the "half-processed"
block problem. Mined transactions are still added to the wallet
database under their own database transaction as this is how they are
notified by the consensus JSON-RPC server (as loose transactions,
without the rest of the block that contains them). It will make
updating to a fixed notification model significantly easier, as the
same "manager" APIs can still be used, but grouped into a single
atomic transaction.
Remove the addresses field from TransactionDetails.Output. It is
assumed that the caller is able to deserialize the transaction and
encode the output scripts to addresses, so this is unnecessary server
overhead and conflicts with the current API philosophy of not
duplicating data already included in another field.
Since there is no additional data included for outputs not controlled
by the wallet, remove the `mine` specifier from the Output message and
replace it with an output index. Only include messages for controlled
outputs, rather than creating messages for both controlled and
uncontrolled outputs. Rename the repeated field from `outputs` to
`credits` to be consistent with the `debits` field.
Bump major API version as this is a breaking change.
Closes#408.
This commit enabled the wallet to properly spend nested and normal
p2wkh outputs under its control.
For regular p2wkh outputs, spending simply involves presenting the
original pub key, and signature as the witness data.
For nested p2wkh outputs, in addition to the above, the version zero
witness p2wkh witness program is placed in the sigScript in order to
allow clients who are aware of BIP 16 to validate the witness spend.
When spending a segwit output, the wallet also needs the input value of
the previous output script. Therefore when selecting outputs the input
value is now returned. Additionally when validating newly signed
outputs the input value as also passed into `txscript.Engine`
Previously, this would not increment the spendable balance for matured
coinbase outputs and would only increment the immature balance if the
output was still immature.
This updates both btcsuite and external dependencies to their latest
versions. In particular, gRPC was updated to version 1.0.3 and bolt
to 1.3.0.
The walletrpc package needed to be regenerated for the gRPC update.
While here, update the Travis-CI script so this can be tested there.
Since the coinbase maturity is now allowed to be defined per chain and
the old blockchain.CoinbaseMaturity constant has been removed, this
updates the code accordingly.
Also, update glide.lock to use the required version of btcd.
This updates all code to make use of the new chainhash package since the
old wire.ShaHash type and related functions have been removed in favor
of the abstracted package.
Also, while here, rename all variables that included sha in their name
to include hash instead.
Finally, update glide.lock to use the required version of btcd, btcutil,
and btcrpcclient.
Remove the addresses field from TransactionDetails.Output. It is
assumed that the caller is able to deserialize the transaction and
encode the output scripts to addresses, so this is unnecessary server
overhead and conflicts with the current API philosophy of not
duplicating data already included in another field.
Since there is no additional data included for outputs not controlled
by the wallet, remove the `mine` specifier from the Output message and
replace it with an output index. Only include messages for controlled
outputs, rather than creating messages for both controlled and
uncontrolled outputs. Rename the repeated field from `outputs` to
`credits` to be consistent with the `debits` field.
Bump major API version as this is a breaking change.
Closes#408.
Due to the way dust is calculated, if the transaction relay fee is
zero, then a zero output amount is not considered dust. As the
transaction authoring code used this dust check to determine whether a
change output can be included or not, it could create unnecessary
change outputs which return no value back to the wallet. Prevent this
by including an explicit check for zero values.
This commit corrects various things found by the static checkers
(comments, unkeyed fields, return after some if/else).
Add generated files and legacy files to the whitelist to be ignored.
Catch .travis.yml up with btcd so goclean can be run.
This changes the wallet.Open function signature to remove the database
namespace parameters. This is done so that the wallet package itself
is responsible for the location and opening of these namespaces from
the database, rather than requiring the caller to open these ahead of
time.
A new wallet.Create function has also been added. This function
initializes a new wallet in an empty database, using the same
namespaces as wallet.Open will eventually use. This relieves the
caller from needing to manage wallet database namespaces explicitly.
Fixes#397.
These notifications were added to support real time updates for
btcgui. As the btcgui project is no longer being developed, there are
no more consumers of this API, and it makes sense to remove them given
their various issues (the largest being that notifiations are sent
unsubscribed to clients that may never be interrested in them).
A new notification server has already been added to the wallet package
to handle notifications in a RPC-server agnostic way. This server is
the means by which the wallet notifies changes for gRPC clients. If
per-client registered notifications are to be re-added for the
JSON-RPC server, they should be integrated with the new notification
server rather than using this legacy code.
This corrects and simplifies the shutdown logic for interrupts, the
walletrpc.WalletLoaderService/CloseWallet RPC, and the legacy stop RPC
by both stopping all wallet processes and closing the wallet database.
It appears that this behavior broke as part of the wallet package
refactor, causing occasional nil pointer panics and memory faults when
closing the wallet database with active transactions.
Fixes#282.
Fixes#283.
This began as a change to improve the fee calculation code and evolved
into a much larger refactor which improves the readability and
modularity of all of the transaction creation code.
Transaction fee calculations have been switched from full increments
of the relay fee to a proportion based on the transaction size. This
means that for a relay fee of 1e3 satoshis/kB, a 500 byte transaction
is only required to pay a 5e2 satoshi fee and a 1500 byte transaction
only need pay a 1.5e3 fee. The previous code would end up estimating
these fees to be 1e3 and 2e3 respectively.
Because the previous code would add more fee than needed in almost
every case, the transaction size estimations were optimistic
(best/smallest case) and signing was done in a loop where the fee was
incremented by the relay fee again each time the actual size of the
signed transaction rendered the fee too low. This has switched to
using worst case transaction size estimates rather than best case, and
signing is only performed once.
Transaction input signature creation has switched from using
txscript.SignatureScript to txscript.SignTxOutput. The new API is
able to redeem outputs other than just P2PKH, so the previous
restrictions about P2SH outputs being unspendable (except through the
signrawtransaction RPC) no longer hold.
Several new public packages have been added:
wallet/txauthor - transaction authoring and signing
wallet/txfees - fee estimations and change output inclusion
wallet/txrules - simple consensus and mempool policy rule checks
Along with some internal packages:
wallet/internal/txsizes - transaction size estimation
internal/helpers - context free convenience functions
The txsizes package is internal as the estimations it provides are
specific for the algorithms used by these new packages.
Previously, when creating a change address during the process of
creating a new transaction an error case would be hit in the waddrmgr
triggered by attempting to derive a new internal address from under a
waddrmgr.ImportedAddrAccount. To remedy this error, we now use the
default account for change when spending outputs from an imported
key. This approach allows funds under the control of imported
private keys to be protected under the wallet's seed as soon as
they've been partially spent.
Previously, if a nil seed was passed into loader.CreateNewWallet, a
random seed was never generated. This would cause an error within the
waddrmgr due to the seed being of invalid (0) length.
