qt: translations pull from transifex

This commit is contained in:
Wladimir J. van der Laan 2014-12-11 11:07:37 +01:00
parent 5e521d3e4e
commit 7c001bb49c
No known key found for this signature in database
GPG key ID: 74810B012346C9A6
12 changed files with 1871 additions and 26 deletions

View file

@ -1855,14 +1855,26 @@ Adresse: %4</translation>
<source>Minimize</source>
<translation>Minimieren</translation>
</message>
<message>
<source>If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.</source>
<translation>Wenn die benutzerdefinierte Gebühr 1000 Satoshis beträgt und die Transaktion nur 250 Byte groß ist, wird bei Auswahl von "pro Kilobyte" eine Gebühr in Höhe von 250 Satoshis, bei Auswahl von "Mindestbetrag" eine Gebühr in Höhe von 1000 Satoshis bezahlt. Bei Transaktionen die Größer als ein Kilobyte sind, werden bei beiden Optionen die Gebühren pro Kilobyte bezahlt.</translation>
</message>
<message>
<source>per kilobyte</source>
<translation>pro Kilobyte</translation>
</message>
<message>
<source>If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.</source>
<translation>Wenn die benutzerdefinierte Gebühr 1000 Satoshis beträgt und die Transaktion nur 250 Byte groß ist, wird bei Auswahl von "pro Kilobyte" eine Gebühr in Höhe von 250 Satoshis, bei Auswahl von "Mindestbetrag" eine Gebühr in Höhe von 1000 Satoshis bezahlt. Bei Transaktionen die Größer als ein Kilobyte sind, werden bei beiden Optionen die Gebühren pro Kilobyte bezahlt.</translation>
</message>
<message>
<source>total at least</source>
<translation>Mindestbetrag</translation>
</message>
<message>
<source>Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.</source>
<translation>Nur die minimale Gebühr zu bezahlen ist so lange in Ordnung, wie weniger Transaktionsvolumen als Platz in den Blöcken vorhanden ist. Aber Vorsicht, diese Option kann dazu führen, dass Transaktionen nicht bestätigt werden, wenn mehr Bedarf an Bitcoin-Transaktionen besteht als das Netzwerk verarbeiten kann.</translation>
</message>
<message>
<source>(read the tooltip)</source>
<translation>(den Hinweistext lesen)</translation>
@ -2821,6 +2833,10 @@ zum Beispiel: alertnotify=echo %%s | mail -s \"Bitcoin Alert\" admin@foo.com
<source>Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup</source>
<translation>Alle Wallet-Transaktionen löschen und nur diese Teilbereiche der Blockkette durch -rescan beim Starten wiederherstellen</translation>
</message>
<message>
<source>Distributed under the MIT software license, see the accompanying file COPYING or &lt;http://www.opensource.org/licenses/mit-license.php&gt;.</source>
<translation>Veröffentlicht unter der MIT-Softwarelizenz, siehe beiligende Datei COPYING oder &lt;http://www.opensource.org/licenses/mit-license.php&gt;.</translation>
</message>
<message>
<source>Enter regression test mode, which uses a special chain in which blocks can be solved instantly.</source>
<translation>Regressionstest-Modus aktivieren, der eine spezielle Blockkette nutzt, in der Blöcke sofort gelöst werden können.</translation>

View file

@ -7,7 +7,7 @@
</message>
<message>
<source>Create a new address</source>
<translation>Δημιούργησε νέα διεύθυνση</translation>
<translation>Δημιουργία νέας διεύθυνσης</translation>
</message>
<message>
<source>&amp;New</source>
@ -53,6 +53,10 @@
<source>Choose the address to receive coins with</source>
<translation>Επιλογή διεύθυνσης απ' όπου θα ληφθούν νομίσματα</translation>
</message>
<message>
<source>C&amp;hoose</source>
<translation>Ε&amp;πιλογή</translation>
</message>
<message>
<source>Sending addresses</source>
<translation>Διευθύνσεις αποστολής</translation>
@ -65,6 +69,10 @@
<source>These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins.</source>
<translation>Αυτές είναι οι Bitcoin διευθύνσεις σας για να λαμβάνετε πληρωμές. Δίνοντας μία ξεχωριστή διεύθυνση σε κάθε αποστολέα, θα μπορείτε να ελέγχετε ποιος σας πληρώνει.</translation>
</message>
<message>
<source>These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction.</source>
<translation>Αυτές είναι οι Bitcoin διευθύνσεις σας για να λαμβάνετε πληρωμές. Δίνοντας μία ξεχωριστή διεύθυνση σε κάθε αποστολέα, θα μπορείτε να ελέγχετε ποιος σας πληρώνει.</translation>
</message>
<message>
<source>Copy &amp;Label</source>
<translation>Αντιγραφή &amp;επιγραφής</translation>
@ -85,7 +93,11 @@
<source>Exporting Failed</source>
<translation>Η εξαγωγή απέτυχε</translation>
</message>
</context>
<message>
<source>There was an error trying to save the address list to %1. Please try again.</source>
<translation>Παρουσιάστηκε σφάλμα κατά την αποθήκευση της λίστας πορτοφολιών στο %1. Παρακαλώ δοκιμάστε ξανά</translation>
</message>
</context>
<context>
<name>AddressTableModel</name>
<message>
@ -113,7 +125,7 @@
</message>
<message>
<source>New passphrase</source>
<translation>Νέος κωδικός πρόσβασης</translation>
<translation>&amp;Αλλαγή κωδικού</translation>
</message>
<message>
<source>Repeat new passphrase</source>
@ -121,7 +133,7 @@
</message>
<message>
<source>Encrypt wallet</source>
<translation>Κρυπτογράφησε το πορτοφόλι</translation>
<translation>&amp;Κρυπτογράφηση πορτοφολιού</translation>
</message>
<message>
<source>This operation needs your wallet passphrase to unlock the wallet.</source>
@ -172,6 +184,10 @@
<source>Wallet encrypted</source>
<translation>Κρυπτογραφημενο πορτοφολι</translation>
</message>
<message>
<source>Enter the new passphrase to the wallet.&lt;br/&gt;Please use a passphrase of &lt;b&gt;ten or more random characters&lt;/b&gt;, or &lt;b&gt;eight or more words&lt;/b&gt;.</source>
<translation>Εισάγετε τον νέο κωδικό πρόσβασης στον πορτοφόλι &lt;br/&gt; Παρακαλώ χρησιμοποιείστε ένα κωδικό με &lt;b&gt; 10 ή περισσότερους τυχαίους χαρακτήρες&lt;/b&gt; ή &lt;b&gt; οχτώ ή παραπάνω λέξεις&lt;/b&gt;.</translation>
</message>
<message>
<source>Bitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.</source>
<translation>Το Bitcoin θα κλεισει τώρα για να τελειώσει την διαδικασία κρυπτογραφησης. Θυμησου ότι κρυπτογραφώντας το πορτοφολι σου δεν μπορείς να προστατέψεις πλήρως τα bitcoins σου από κλοπή στην περίπτωση όπου μολυνθεί ο υπολογιστής σου με κακόβουλο λογισμικό.</translation>
@ -219,6 +235,10 @@
<source>&amp;Overview</source>
<translation>&amp;Επισκόπηση</translation>
</message>
<message>
<source>Node</source>
<translation>Κόμβος</translation>
</message>
<message>
<source>Show general overview of wallet</source>
<translation>Εμφάνισε τη γενική εικόνα του πορτοφολιού</translation>
@ -263,6 +283,22 @@
<source>&amp;Change Passphrase...</source>
<translation>&amp;Άλλαξε κωδικο πρόσβασης</translation>
</message>
<message>
<source>&amp;Sending addresses...</source>
<translation>Διευθύνσεις αποστολής</translation>
</message>
<message>
<source>&amp;Receiving addresses...</source>
<translation>Διευθύνσεις λήψης</translation>
</message>
<message>
<source>Open &amp;URI...</source>
<translation>'Ανοιγμα &amp;URI</translation>
</message>
<message>
<source>Bitcoin Core client</source>
<translation>Εφαρμογή Bitcoin Core</translation>
</message>
<message>
<source>Importing blocks from disk...</source>
<translation>Εισαγωγή μπλοκ από τον σκληρο δίσκο ... </translation>
@ -315,6 +351,10 @@
<source>&amp;Receive</source>
<translation>&amp;Παραλαβή </translation>
</message>
<message>
<source>Show information about Bitcoin Core</source>
<translation>Σχετικά με το Bitcoin Core</translation>
</message>
<message>
<source>&amp;Show / Hide</source>
<translation>&amp;Εμφάνισε/Κρύψε</translation>
@ -371,6 +411,18 @@
<source>Show the list of used receiving addresses and labels</source>
<translation>Προβολή της λίστας των χρησιμοποιημένων διευθύνσεων και ετικετών λήψεως</translation>
</message>
<message>
<source>Open a bitcoin: URI or payment request</source>
<translation>Άνοιγμα bitcoin: URI αίτησης πληρωμής</translation>
</message>
<message>
<source>&amp;Command-line options</source>
<translation>&amp;Επιλογές γραμμής εντολών</translation>
</message>
<message>
<source>Show the Bitcoin Core help message to get a list with possible Bitcoin command-line options</source>
<translation>Εμφανιση του Bitcoin-Qt μήνυματος βοήθειας για να πάρετε μια λίστα με τις πιθανές επιλογές Bitcoin γραμμής εντολών.</translation>
</message>
<message numerus="yes">
<source>%n active connection(s) to Bitcoin network</source>
<translation><numerusform>%n ενεργή σύνδεση στο δίκτυο Bitcoin</numerusform><numerusform>%n ενεργές συνδέσεις στο δίκτυο Βitcoin</numerusform></translation>
@ -469,6 +521,10 @@ Address: %4
</context>
<context>
<name>CoinControlDialog</name>
<message>
<source>Coin Selection</source>
<translation>Επιλογή κερμάτων</translation>
</message>
<message>
<source>Quantity:</source>
<translation>Ποσότητα:</translation>
@ -485,6 +541,18 @@ Address: %4
<source>Priority:</source>
<translation>Προτεραιότητα:</translation>
</message>
<message>
<source>Fee:</source>
<translation>Ταρίφα</translation>
</message>
<message>
<source>Dust:</source>
<translation>Σκόνη</translation>
</message>
<message>
<source>After Fee:</source>
<translation>Ταρίφα αλλαγής</translation>
</message>
<message>
<source>Change:</source>
<translation>Ρέστα:</translation>
@ -493,10 +561,26 @@ Address: %4
<source>(un)select all</source>
<translation>(από)επιλογή όλων</translation>
</message>
<message>
<source>Tree mode</source>
<translation>Εμφάνιση τύπου δέντρο</translation>
</message>
<message>
<source>List mode</source>
<translation>Λίστα εντολών</translation>
</message>
<message>
<source>Amount</source>
<translation>Ποσό</translation>
</message>
<message>
<source>Received with label</source>
<translation>Παραλήφθηκε με επιγραφή</translation>
</message>
<message>
<source>Received with address</source>
<translation>Παραλείφθηκε με την εξής διεύθυνση</translation>
</message>
<message>
<source>Date</source>
<translation>Ημερομηνία</translation>
@ -529,10 +613,26 @@ Address: %4
<source>Copy transaction ID</source>
<translation>Αντιγραφη του ID Συναλλαγής</translation>
</message>
<message>
<source>Lock unspent</source>
<translation>Κλείδωμα αξόδευτων</translation>
</message>
<message>
<source>Unlock unspent</source>
<translation>Ξεκλείδωμα αξόδευτων</translation>
</message>
<message>
<source>Copy quantity</source>
<translation>Αντιγραφή ποσότητας</translation>
</message>
<message>
<source>Copy fee</source>
<translation>Αντιγραφή ταρίφας</translation>
</message>
<message>
<source>Copy after fee</source>
<translation>Αντιγραφή ταρίφας</translation>
</message>
<message>
<source>Copy bytes</source>
<translation>Αντιγραφή των byte</translation>
@ -541,6 +641,10 @@ Address: %4
<source>Copy priority</source>
<translation>Αντιγραφή προτεραιότητας</translation>
</message>
<message>
<source>Copy dust</source>
<translation>Αντιγραφή 'σκόνης'</translation>
</message>
<message>
<source>Copy change</source>
<translation>Αντιγραφή των ρέστων</translation>
@ -601,6 +705,22 @@ Address: %4
<source>This label turns red, if the transaction size is greater than 1000 bytes.</source>
<translation>Η ετικετα γινετε κοκκινη , αν το μεγεθος της συναλαγης ειναι μεγαλητερο απο 1000 bytes.</translation>
</message>
<message>
<source>This means a fee of at least %1 per kB is required.</source>
<translation>Ελάχιστο χρεώσιμο ποσό τουλάχιστο %1 ανα kB</translation>
</message>
<message>
<source>Transactions with higher priority are more likely to get included into a block.</source>
<translation>Συναλλαγές με υψηλότερη προτεραιότητα είναι πιο πιθανό να περιλαμβάνονται σε ένα μπλοκ.</translation>
</message>
<message>
<source>This label turns red, if the priority is smaller than "medium".</source>
<translation>Η ετικέτα γίνεται κόκκινη , αν το μέγεθος της συναλαγής είναι μεγαλύτερο απο το ",μεσαίο",</translation>
</message>
<message>
<source>This label turns red, if any recipient receives an amount smaller than %1.</source>
<translation>Η ετικέτα γίνεται κόκκινη , αν ο παραλήπτης παραλάβει ένα ποσό μικρότερο απο %1.</translation>
</message>
<message>
<source>(no label)</source>
<translation>(χωρίς ετικέτα)</translation>
@ -629,6 +749,10 @@ Address: %4
<source>The label associated with this address list entry</source>
<translation>Η ετικέτα που συνδέεται με αυτήν την καταχώρηση στο βιβλίο διευθύνσεων</translation>
</message>
<message>
<source>The address associated with this address list entry. This can only be modified for sending addresses.</source>
<translation>Η διεύθυνση σχετίζεται με αυτή την καταχώρηση του βιβλίου διευθύνσεων. Μπορεί να τροποποιηθεί μόνο για τις διευθύνσεις αποστολής.</translation>
</message>
<message>
<source>&amp;Address</source>
<translation>&amp;Διεύθυνση</translation>
@ -676,6 +800,14 @@ Address: %4
<source>name</source>
<translation>όνομα</translation>
</message>
<message>
<source>Directory already exists. Add %1 if you intend to create a new directory here.</source>
<translation>Κατάλογος ήδη υπάρχει. Προσθήκη %1, αν σκοπεύετε να δημιουργήσετε έναν νέο κατάλογο εδώ.</translation>
</message>
<message>
<source>Path already exists, and is not a directory.</source>
<translation>Η διαδρομή υπάρχει ήδη αλλά δεν είναι φάκελος</translation>
</message>
<message>
<source>Cannot create data directory here.</source>
<translation>Δεν μπορεί να δημιουργηθεί φάκελος δεδομένων εδώ.</translation>
@ -723,11 +855,19 @@ Address: %4
<source>Start minimized</source>
<translation>Έναρξη ελαχιστοποιημένο</translation>
</message>
<message>
<source>Set SSL root certificates for payment request (default: -system-)</source>
<translation>Ορίστε SSL root certificates για αίτηση πληρωμής (default: -system-)</translation>
</message>
<message>
<source>Show splash screen on startup (default: 1)</source>
<translation>Εμφάνισε την οθόνη εκκίνησης κατά την εκκίνηση(προεπιλογή:1)</translation>
</message>
</context>
<message>
<source>Choose data directory on startup (default: 0)</source>
<translation>Επιλογή καταλόγου</translation>
</message>
</context>
<context>
<name>Intro</name>
<message>
@ -742,6 +882,10 @@ Address: %4
<source>As this is the first time the program is launched, you can choose where Bitcoin Core will store its data.</source>
<translation>Καθώς αυτή είναι η πρώτη φορά που εκκινείται το πρόγραμμα, μπορείτε να διαλέξετε πού θα αποθηκεύει το Bitcoin Core τα δεδομένα του.</translation>
</message>
<message>
<source>Bitcoin Core will download and store a copy of the Bitcoin block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory.</source>
<translation>O πυρήνας Bitcoin θα κατεβάσει και να αποθηκεύσει ένα αντίγραφο της αλυσίδας μπλοκ Bitcoin. Τουλάχιστον %1GB δεδομένων θα αποθηκευτούν σε αυτόν τον κατάλογο, και θα αυξηθεί με την πάροδο του χρόνου. Το πορτοφόλι θα αποθηκευτεί σε αυτόν τον κατάλογο.</translation>
</message>
<message>
<source>Use the default data directory</source>
<translation>Χρήση του προεπιλεγμένου φακέλου δεδομένων</translation>
@ -754,6 +898,10 @@ Address: %4
<source>Bitcoin Core</source>
<translation>Bitcoin Core</translation>
</message>
<message>
<source>Error: Specified data directory "%1" cannot be created.</source>
<translation>Σφάλμα: Ο καθορισμένος φάκελος δεδομένων "%1" δεν μπορεί να δημιουργηθεί.</translation>
</message>
<message>
<source>Error</source>
<translation>Σφάλμα</translation>
@ -761,7 +909,27 @@ Address: %4
</context>
<context>
<name>OpenURIDialog</name>
</context>
<message>
<source>Open URI</source>
<translation>'Ανοιγμα &amp;URI</translation>
</message>
<message>
<source>Open payment request from URI or file</source>
<translation>Ανοιχτό αίτημα πληρωμής από URI ή απο αρχείο</translation>
</message>
<message>
<source>URI:</source>
<translation>URI:</translation>
</message>
<message>
<source>Select payment request file</source>
<translation>Επιλέξτε πληρωμή αρχείου αίτησης</translation>
</message>
<message>
<source>Select payment request file to open</source>
<translation>Επιλέξτε αρχείο πληρωμής για άνοιγμα.</translation>
</message>
</context>
<context>
<name>OptionsDialog</name>
<message>
@ -780,10 +948,34 @@ Address: %4
<source>&amp;Start Bitcoin on system login</source>
<translation>&amp;Έναρξη του Βιtcoin κατά την εκκίνηση του συστήματος</translation>
</message>
<message>
<source>Size of &amp;database cache</source>
<translation>Μέγεθος κρυφής μνήμης βάσης δεδομένων.</translation>
</message>
<message>
<source>MB</source>
<translation>MB</translation>
</message>
<message>
<source>Number of script &amp;verification threads</source>
<translation>Αριθμός script και γραμμές επαλήθευσης </translation>
</message>
<message>
<source>Accept connections from outside</source>
<translation>Αποδοχή συνδέσεων απο έξω</translation>
</message>
<message>
<source>Allow incoming connections</source>
<translation>Αποδοχή εισερχόμενων συναλλαγών</translation>
</message>
<message>
<source>IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)</source>
<translation>Διεύθυνση IP του διαμεσολαβητή (π.χ. 127.0.0.1 / IPv6: ::1)</translation>
</message>
<message>
<source>Third party transaction URLs</source>
<translation>Διευθύνσεις τρίτων συναλλαγών.</translation>
</message>
<message>
<source>Reset all client options to default.</source>
<translation>Επαναφορα όλων των επιλογων του πελάτη σε default.</translation>
@ -796,10 +988,18 @@ Address: %4
<source>&amp;Network</source>
<translation>&amp;Δίκτυο</translation>
</message>
<message>
<source>W&amp;allet</source>
<translation>Π&amp;ορτοφόλι</translation>
</message>
<message>
<source>Expert</source>
<translation>Έμπειρος</translation>
</message>
<message>
<source>Enable coin &amp;control features</source>
<translation>Επιλογή κατα πόσο να αναδείχνονται οι δυνατότητες ελέγχου κερμάτων.</translation>
</message>
<message>
<source>Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.</source>
<translation>Αυτόματο άνοιγμα των θυρών Bitcoin στον δρομολογητή. Λειτουργεί μόνο αν ο δρομολογητής σας υποστηρίζει τη λειτουργία UPnP.</translation>
@ -808,6 +1008,14 @@ Address: %4
<source>Map port using &amp;UPnP</source>
<translation>Απόδοση θυρών με χρήστη &amp;UPnP</translation>
</message>
<message>
<source>Connect to the Bitcoin network through a SOCKS5 proxy.</source>
<translation>Σύνδεση στο Bitcoin δίκτυο μέσω διαμεσολαβητή SOCKS5 (π.χ. για σύνδεση μέσω Tor)</translation>
</message>
<message>
<source>&amp;Connect through SOCKS5 proxy (default proxy):</source>
<translation>&amp;Σύνδεση μέσω διαμεσολαβητή SOCKS5 (προεπιλεγμένος)</translation>
</message>
<message>
<source>Proxy &amp;IP:</source>
<translation>&amp;IP διαμεσολαβητή:</translation>
@ -860,6 +1068,10 @@ Address: %4
<source>Choose the default subdivision unit to show in the interface and when sending coins.</source>
<translation>Διαλέξτε την προεπιλεγμένη υποδιαίρεση που θα εμφανίζεται όταν στέλνετε νομίσματα.</translation>
</message>
<message>
<source>Whether to show coin control features or not.</source>
<translation>Επιλογή κατα πόσο να αναδείχνονται οι δυνατότητες ελέγχου κερμάτων.</translation>
</message>
<message>
<source>&amp;OK</source>
<translation>&amp;ΟΚ</translation>
@ -884,6 +1096,14 @@ Address: %4
<source>Client restart required to activate changes.</source>
<translation>Χρειάζεται επανεκκίνηση του προγράμματος για να ενεργοποιηθούν οι αλλαγές.</translation>
</message>
<message>
<source>Client will be shutdown, do you want to proceed?</source>
<translation>Η εφαρμογή θα τερματιστεί. Θέλετε να προχωρήσετε;</translation>
</message>
<message>
<source>This change would require a client restart.</source>
<translation>Η αλλαγή αυτή θα χρειαστεί επανεκκίνηση του προγράμματος</translation>
</message>
<message>
<source>The supplied proxy address is invalid.</source>
<translation>Δεν είναι έγκυρη η διεύθυνση διαμεσολαβητή</translation>
@ -899,6 +1119,10 @@ Address: %4
<source>The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.</source>
<translation>Οι πληροφορίες που εμφανίζονται μπορεί να είναι ξεπερασμένες. Το πορτοφόλι σας συγχρονίζεται αυτόματα με το δίκτυο Bitcoin μετά από μια σύνδεση, αλλά αυτή η διαδικασία δεν έχει ακόμη ολοκληρωθεί. </translation>
</message>
<message>
<source>Watch-only:</source>
<translation>Επίβλεψη μόνο:</translation>
</message>
<message>
<source>Available:</source>
<translation>Διαθέσιμο:</translation>
@ -907,6 +1131,10 @@ Address: %4
<source>Your current spendable balance</source>
<translation>Το τρέχον διαθέσιμο υπόλοιπο</translation>
</message>
<message>
<source>Pending:</source>
<translation>Εκκρεμούν:</translation>
</message>
<message>
<source>Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance</source>
<translation>Το άθροισμα των συναλλαγών που δεν έχουν ακόμα επιβεβαιωθεί και δεν προσμετρώνται στο τρέχον διαθέσιμο υπόλοιπό σας</translation>
@ -919,6 +1147,10 @@ Address: %4
<source>Mined balance that has not yet matured</source>
<translation>Εξορυγμενο υπόλοιπο που δεν έχει ακόμα ωριμάσει </translation>
</message>
<message>
<source>Balances</source>
<translation>Υπόλοιπο:</translation>
</message>
<message>
<source>Total:</source>
<translation>Σύνολο:</translation>
@ -927,6 +1159,14 @@ Address: %4
<source>Your current total balance</source>
<translation>Το τρέχον συνολικό υπόλοιπο</translation>
</message>
<message>
<source>Spendable:</source>
<translation>Ξοδεμένα:</translation>
</message>
<message>
<source>Recent transactions</source>
<translation>Πρόσφατες συναλλαγές</translation>
</message>
<message>
<source>out of sync</source>
<translation>εκτός συγχρονισμού</translation>
@ -942,6 +1182,18 @@ Address: %4
<source>Invalid payment address %1</source>
<translation>Μη έγκυρη διεύθυνση πληρωμής %1</translation>
</message>
<message>
<source>Payment request rejected</source>
<translation>Η αίτηση πληρωμής έχει αρνηθεί.</translation>
</message>
<message>
<source>Payment request has expired.</source>
<translation>Η αίτηση πληρωμής έχει λήξει.</translation>
</message>
<message>
<source>Payment request is not initialized.</source>
<translation>Η αίτηση πληρωμής δεν έχει αρχίζει ακόμα.</translation>
</message>
<message>
<source>Payment request error</source>
<translation>Σφάλμα αιτήματος πληρωμής</translation>
@ -950,6 +1202,18 @@ Address: %4
<source>Cannot start bitcoin: click-to-pay handler</source>
<translation>Δεν είναι δυνατή η εκκίνηση του Bitcoin: click-to-pay handler</translation>
</message>
<message>
<source>Payment request fetch URL is invalid: %1</source>
<translation>Η διεύθυνση πληρωμής (URL) δεν είναι έγκυρη: %1</translation>
</message>
<message>
<source>Payment request file handling</source>
<translation>Επιλέξτε αρχείο πληρωμής για άνοιγμα.</translation>
</message>
<message>
<source>Refund from %1</source>
<translation>Επιστροφή ποσού από %1</translation>
</message>
<message>
<source>Payment acknowledged</source>
<translation>Πληρωμή αναγνωρίστηκε</translation>
@ -961,13 +1225,29 @@ Address: %4
</context>
<context>
<name>PeerTableModel</name>
</context>
<message>
<source>Address/Hostname</source>
<translation>Διεύθυθνση/Όνομα υπολογιστή</translation>
</message>
<message>
<source>Ping Time</source>
<translation>Χρόνος καθυστέρησης</translation>
</message>
</context>
<context>
<name>QObject</name>
<message>
<source>Amount</source>
<translation>Ποσό</translation>
</message>
<message>
<source>Enter a Bitcoin address (e.g. %1)</source>
<translation>Εισάγετε μια διεύθυνση Bitcoin (π.χ. %1)</translation>
</message>
<message>
<source>%1 d</source>
<translation>%1 d</translation>
</message>
<message>
<source>%1 h</source>
<translation>%1 ώ</translation>
@ -976,11 +1256,31 @@ Address: %4
<source>%1 m</source>
<translation>%1 λ</translation>
</message>
<message>
<source>%1 s</source>
<translation>%1 s</translation>
</message>
<message>
<source>NETWORK</source>
<translation>Δίκτυο</translation>
</message>
<message>
<source>UNKNOWN</source>
<translation>Άγνωστο(α)</translation>
</message>
<message>
<source>None</source>
<translation>Κανένα</translation>
</message>
<message>
<source>N/A</source>
<translation>Μη διαθέσιμο</translation>
</message>
</context>
<message>
<source>%1 ms</source>
<translation>%1 ms</translation>
</message>
</context>
<context>
<name>QRImageWidget</name>
<message>
@ -1054,6 +1354,22 @@ Address: %4
<source>Current number of blocks</source>
<translation>Τρέχον αριθμός μπλοκ</translation>
</message>
<message>
<source>Received</source>
<translation>Παραλήφθησαν</translation>
</message>
<message>
<source>Version</source>
<translation>Έκδοση</translation>
</message>
<message>
<source>Services</source>
<translation>Υπηρεσίες</translation>
</message>
<message>
<source>Ping Time</source>
<translation>Χρόνος καθυστέρησης</translation>
</message>
<message>
<source>Last block time</source>
<translation>Χρόνος τελευταίου μπλοκ</translation>
@ -1130,6 +1446,26 @@ Address: %4
<source>%1 GB</source>
<translation>%1 GB</translation>
</message>
<message>
<source>via %1</source>
<translation>μέσω %1</translation>
</message>
<message>
<source>never</source>
<translation>ποτέ</translation>
</message>
<message>
<source>Inbound</source>
<translation>Εισερχόμενα</translation>
</message>
<message>
<source>Outbound</source>
<translation>Εξερχόμενα</translation>
</message>
<message>
<source>Unknown</source>
<translation>Άγνωστο(α)</translation>
</message>
</context>
<context>
<name>ReceiveCoinsDialog</name>
@ -1184,6 +1520,10 @@ Address: %4
<source>QR Code</source>
<translation>Κώδικας QR</translation>
</message>
<message>
<source>Copy &amp;URI</source>
<translation>Αντιγραφη της επιλεγμενης διεύθυνσης στο πρόχειρο του συστηματος</translation>
</message>
<message>
<source>&amp;Save Image...</source>
<translation>&amp;Αποθήκευση εικόνας...</translation>
@ -1192,6 +1532,10 @@ Address: %4
<source>Payment information</source>
<translation>Πληροφορίες πληρωμής</translation>
</message>
<message>
<source>URI</source>
<translation>URI:</translation>
</message>
<message>
<source>Address</source>
<translation>Διεύθυνση</translation>
@ -1254,6 +1598,10 @@ Address: %4
<source>Send Coins</source>
<translation>Αποστολή νομισμάτων</translation>
</message>
<message>
<source>Coin Control Features</source>
<translation>Χαρακτηρηστικά επιλογής κερμάτων</translation>
</message>
<message>
<source>automatically selected</source>
<translation>επιλεγμένο αυτόματα</translation>
@ -1278,10 +1626,34 @@ Address: %4
<source>Priority:</source>
<translation>Προτεραιότητα:</translation>
</message>
<message>
<source>Fee:</source>
<translation>Ταρίφα</translation>
</message>
<message>
<source>After Fee:</source>
<translation>Ταρίφα αλλαγής</translation>
</message>
<message>
<source>Change:</source>
<translation>Ρέστα:</translation>
</message>
<message>
<source>Transaction Fee:</source>
<translation>Τέλος συναλλαγής:</translation>
</message>
<message>
<source>Choose...</source>
<translation>Επιλογή...</translation>
</message>
<message>
<source>Minimize</source>
<translation>Ελαχιστοποίηση</translation>
</message>
<message>
<source>fast</source>
<translation>Γρήγορο</translation>
</message>
<message>
<source>Send to multiple recipients at once</source>
<translation>Αποστολή σε πολλούς αποδέκτες ταυτόχρονα</translation>
@ -1294,6 +1666,10 @@ Address: %4
<source>Clear all fields of the form.</source>
<translation>Καθαρισμός όλων των πεδίων της φόρμας.</translation>
</message>
<message>
<source>Dust:</source>
<translation>Σκόνη</translation>
</message>
<message>
<source>Clear &amp;All</source>
<translation>Καθαρισμός &amp;Όλων</translation>
@ -1326,6 +1702,14 @@ Address: %4
<source>Copy amount</source>
<translation>Αντιγραφή ποσού</translation>
</message>
<message>
<source>Copy fee</source>
<translation>Αντιγραφή ταρίφας</translation>
</message>
<message>
<source>Copy after fee</source>
<translation>Αντιγραφή μετα-ταρίφας</translation>
</message>
<message>
<source>Copy bytes</source>
<translation>Αντιγραφή των byte</translation>
@ -1378,6 +1762,10 @@ Address: %4
<source>(no label)</source>
<translation>(χωρίς ετικέτα)</translation>
</message>
<message>
<source>Copy dust</source>
<translation>Αντιγραφή 'σκόνης'</translation>
</message>
<message>
<source>Are you sure you want to send?</source>
<translation>Είστε βέβαιοι για την αποστολή;</translation>
@ -1463,6 +1851,10 @@ Address: %4
<source>You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.</source>
<translation>Μπορείτε να υπογράφετε μηνύματα με τις διευθύνσεις σας, ώστε ν' αποδεικνύετε πως αυτές σας ανήκουν. Αποφεύγετε να υπογράφετε κάτι αόριστο καθώς ενδέχεται να εξαπατηθείτε. Υπογράφετε μόνο πλήρης δηλώσεις με τις οποίες συμφωνείτε.</translation>
</message>
<message>
<source>The Bitcoin address to sign the message with</source>
<translation>Διεύθυνση Bitcoin που θα σταλεί το μήνυμα</translation>
</message>
<message>
<source>Choose previously used address</source>
<translation>Επιλογή διεύθυνσης που έχει ήδη χρησιμοποιηθεί</translation>
@ -1515,6 +1907,10 @@ Address: %4
<source>Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack.</source>
<translation>Πληκτρολογήστε την υπογραφή διεύθυνσης, μήνυμα (βεβαιωθείτε ότι έχετε αντιγράψει τις αλλαγές γραμμής, κενά, tabs, κ.λπ. ακριβώς) και την υπογραφή παρακάτω, για να ελέγξει το μήνυμα. Να είστε προσεκτικοί για να μην διαβάσετε περισσότερα στην υπογραφή ό, τι είναι στην υπογραφή ίδιο το μήνυμα , για να μην εξαπατηθούν από έναν άνθρωπο -in - the-middle επίθεση.</translation>
</message>
<message>
<source>The Bitcoin address the message was signed with</source>
<translation>Διεύθυνση Bitcoin η οποία το μήνυμα έχει υπογραφεί</translation>
</message>
<message>
<source>Verify the message to ensure it was signed with the specified Bitcoin address</source>
<translation>Υπογράψτε ένα μήνυμα για ν' αποδείξετε πως υπογραφθηκε απο μια συγκεκριμένη διεύθυνση Bitcoin</translation>
@ -1608,6 +2004,10 @@ Address: %4
<source>Open until %1</source>
<translation>Ανοιχτό μέχρι %1</translation>
</message>
<message>
<source>conflicted</source>
<translation>σύγκρουση</translation>
</message>
<message>
<source>%1/offline</source>
<translation>%1/χωρίς σύνδεση;</translation>
@ -1652,6 +2052,10 @@ Address: %4
<source>own address</source>
<translation> δική σας διεύθυνση </translation>
</message>
<message>
<source>watch-only</source>
<translation>Επίβλεψη μόνο:</translation>
</message>
<message>
<source>label</source>
<translation>ιγραφή</translation>
@ -1672,6 +2076,14 @@ Address: %4
<source>Debit</source>
<translation>Debit</translation>
</message>
<message>
<source>Total debit</source>
<translation>Σύνολο χρέωσης</translation>
</message>
<message>
<source>Total credit</source>
<translation>Συνολική πίστωση</translation>
</message>
<message>
<source>Transaction fee</source>
<translation>Τέλος συναλλαγής </translation>
@ -1696,6 +2108,10 @@ Address: %4
<source>Merchant</source>
<translation>Έμπορος</translation>
</message>
<message>
<source>Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.</source>
<translation>Πρέπει να περιμένετε %1 μπλοκ πριν μπορέσετε να χρησιμοποιήσετε τα νομίσματα που έχετε δημιουργήσει. Το μπλοκ που δημιουργήσατε μεταδόθηκε στο δίκτυο για να συμπεριληφθεί στην αλυσίδα των μπλοκ. Αν δεν μπει σε αυτή θα μετατραπεί σε "μη αποδεκτό" και δε θα μπορεί να καταναλωθεί. Αυτό συμβαίνει σπάνια όταν κάποιος άλλος κόμβος δημιουργήσει ένα μπλοκ λίγα δευτερόλεπτα πριν από εσάς.</translation>
</message>
<message>
<source>Debug information</source>
<translation>Πληροφορίες αποσφαλμάτωσης</translation>
@ -1786,6 +2202,10 @@ Address: %4
<source>Unconfirmed</source>
<translation>Ανεπιβεβαίωτες</translation>
</message>
<message>
<source>Conflicted</source>
<translation>Σύγκρουση</translation>
</message>
<message>
<source>Received with</source>
<translation>Παραλαβή με</translation>
@ -1806,6 +2226,10 @@ Address: %4
<source>Mined</source>
<translation>Εξόρυξη</translation>
</message>
<message>
<source>watch-only</source>
<translation>Επίβλεψη μόνο:</translation>
</message>
<message>
<source>(n/a)</source>
<translation>(δ/α)</translation>
@ -1917,6 +2341,10 @@ Address: %4
<source>Export Transaction History</source>
<translation>Εξαγωγή Ιστορικού Συναλλαγών</translation>
</message>
<message>
<source>Watch-only</source>
<translation>Επίβλεψη μόνο:</translation>
</message>
<message>
<source>Exporting Failed</source>
<translation>Η Εξαγωγή Απέτυχε</translation>
@ -2153,6 +2581,10 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
<source>Error opening block database</source>
<translation>Σφάλμα φορτωσης της βασης δεδομενων των μπλοκ</translation>
</message>
<message>
<source>Error: A fatal internal error occured, see debug.log for details</source>
<translation>Σφάλμα: Παρουσιάστηκε ανεπανόρθωτο εσωτερικό σφάλμα, δείτε debug.log για λεπτομέρειες</translation>
</message>
<message>
<source>Error: Disk space is low!</source>
<translation>Προειδοποίηση: Χαμηλός χώρος στο δίσκο </translation>
@ -2165,6 +2597,10 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
<source>Failed to listen on any port. Use -listen=0 if you want this.</source>
<translation>ταλαιπωρηθειτε για να ακούσετε σε οποιαδήποτε θύρα. Χρήση - ακούστε = 0 , αν θέλετε αυτό.</translation>
</message>
<message>
<source>Importing...</source>
<translation>ΕΙσαγωγή...</translation>
</message>
<message>
<source>Invalid -onion address: '%s'</source>
<translation>Άκυρη διεύθυνση -onion : '%s'</translation>
@ -2177,6 +2613,10 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
<source>Rebuild block chain index from current blk000??.dat files</source>
<translation>Εισαγωγή μπλοκ από εξωτερικό αρχείο blk000?.dat</translation>
</message>
<message>
<source>Specify wallet file (within data directory)</source>
<translation>Επιλέξτε αρχείο πορτοφολιού (μέσα απο κατάλογο δεδομένων)</translation>
</message>
<message>
<source>Verifying blocks...</source>
<translation>Επαλήθευση των μπλοκ... </translation>
@ -2193,6 +2633,26 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
<source>Imports blocks from external blk000??.dat file</source>
<translation>Εισαγωγή μπλοκ από εξωτερικό αρχείο blk000?.dat</translation>
</message>
<message>
<source>Cannot obtain a lock on data directory %s. Bitcoin Core is probably already running.</source>
<translation>Αδυναμία κλειδώματος του φακέλου δεδομένων %s. Πιθανώς το Bitcoin να είναι ήδη ενεργό.</translation>
</message>
<message>
<source>Connect through SOCKS5 proxy</source>
<translation>Σύνδεση μέσω διαμεσολαβητή SOCKS5</translation>
</message>
<message>
<source>Could not parse -rpcbind value %s as network address</source>
<translation>Δεν μπόρεσε να αναλυθεί η παράμετρος -rpcbind value %s ως διεύθυνση δικτύου</translation>
</message>
<message>
<source>Error loading wallet.dat: Wallet requires newer version of Bitcoin Core</source>
<translation>Σφάλμα φόρτωσης wallet.dat: Το Πορτοφόλι απαιτεί μια νεότερη έκδοση του Bitcoin</translation>
</message>
<message>
<source>Error: Unsupported argument -tor found, use -onion.</source>
<translation>Σφάλμα: Μη συμβατή παράμετρος -tor. Χρησιμοποιήσε την παράμετρο -onion</translation>
</message>
<message>
<source>Information</source>
<translation>Πληροφορία</translation>
@ -2205,6 +2665,10 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
<source>Invalid amount for -mintxfee=&lt;amount&gt;: '%s'</source>
<translation>Μη έγκυρο ποσό για την παράμετρο -paytxfee=&lt;amount&gt;: '%s'</translation>
</message>
<message>
<source>RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
<translation>Ρυθμίσεις SSL: (ανατρέξτε στο Bitcoin Wiki για οδηγίες ρυθμίσεων SSL)</translation>
</message>
<message>
<source>Send trace/debug info to console instead of debug.log file</source>
<translation>Αποστολή πληροφοριών εντοπισμού σφαλμάτων στην κονσόλα αντί του αρχείου debug.log</translation>
@ -2217,6 +2681,10 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
<source>Signing transaction failed</source>
<translation>Η υπογραφή συναλλαγής απέτυχε </translation>
</message>
<message>
<source>This is experimental software.</source>
<translation>Η εφαρμογή είναι σε πειραματικό στάδιο.</translation>
</message>
<message>
<source>Transaction amount too small</source>
<translation>Το ποσό της συναλλαγής είναι πολύ μικρο </translation>
@ -2245,6 +2713,10 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
<source>Warning: This version is obsolete, upgrade required!</source>
<translation>Προειδοποίηση: Αυτή η έκδοση είναι ξεπερασμένη, απαιτείται αναβάθμιση </translation>
</message>
<message>
<source>Zapping all transactions from wallet...</source>
<translation>Μεταφορά όλων των συναλλαγών απο το πορτοφόλι</translation>
</message>
<message>
<source>on startup</source>
<translation>κατά την εκκίνηση</translation>
@ -2289,14 +2761,62 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
<source>Error loading wallet.dat: Wallet corrupted</source>
<translation>Σφάλμα φόρτωσης wallet.dat: Κατεστραμμένο Πορτοφόλι</translation>
</message>
<message>
<source>How thorough the block verification of -checkblocks is (0-4, default: %u)</source>
<translation>Πόσο εξονυχιστική να είναι η επιβεβαίωση του μπλοκ (0-4, προεπιλογή: %u)</translation>
</message>
<message>
<source>Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)</source>
<translation>Διατηρήση ένος πλήρες ευρετήριου συναλλαγών (προεπιλογή: %u) </translation>
</message>
<message>
<source>Number of seconds to keep misbehaving peers from reconnecting (default: %u)</source>
<translation>Δευτερόλεπτα πριν επιτραπεί ξανά η σύνδεση των προβληματικών peers (προεπιλογή: %u)</translation>
</message>
<message>
<source>Error loading wallet.dat</source>
<translation>Σφάλμα φόρτωσης αρχείου wallet.dat</translation>
</message>
<message>
<source>Force safe mode (default: %u)</source>
<translation>Επιβολή ασφαλής λειτουργίας (προεπιλογή: %u)</translation>
</message>
<message>
<source>Generate coins (default: %u)</source>
<translation>Δημιουργία νομισμάτων (προκαθορισμος: %u)</translation>
</message>
<message>
<source>How many blocks to check at startup (default: %u, 0 = all)</source>
<translation>Πόσα μπλοκ να ελέγχθουν κατά την εκκίνηση (προεπιλογή: %u, 0 = όλα)</translation>
</message>
<message>
<source>Include IP addresses in debug output (default: %u)</source>
<translation>Να συμπεριληφθεί η διεύθυνση IP στην αναφορά? (προεπιλογή: %u)</translation>
</message>
<message>
<source>Invalid -proxy address: '%s'</source>
<translation>Δεν είναι έγκυρη η διεύθυνση διαμεσολαβητή: '%s'</translation>
</message>
<message>
<source>Print block tree on startup (default: %u)</source>
<translation>Εκτύπωση μπλοκ δέντρου κατά την εκκίνηση (προεπιλογή: %u)</translation>
</message>
<message>
<source>Server certificate file (default: %s)</source>
<translation>Αρχείο πιστοποιητικού του διακομιστή (προεπιλογή: %s)</translation>
</message>
<message>
<source>Specify connection timeout in milliseconds (minimum: 1, default: %d)</source>
<translation>Ορισμός λήξης χρονικού ορίου σε χιλιοστά του δευτερολέπτου(προεπιλογή: %d)</translation>
</message>
<message>
<source>Specify pid file (default: %s)</source>
<translation>Ορίστε αρχείο pid (προεπιλογή: %s)</translation>
</message>
<message>
<source>Threshold for disconnecting misbehaving peers (default: %u)</source>
<translation>Όριο αποσύνδεσης προβληματικών peers (προεπιλογή: %u)</translation>
</message>
<message>
<source>Unknown network specified in -onlynet: '%s'</source>
<translation>Άγνωστo δίκτυο ορίζεται σε onlynet: '%s'</translation>

View file

@ -524,6 +524,10 @@ Dirección: %4
</context>
<context>
<name>CoinControlDialog</name>
<message>
<source>Coin Selection</source>
<translation>Selección de la moneda</translation>
</message>
<message>
<source>Quantity:</source>
<translation>Cantidad:</translation>
@ -572,6 +576,14 @@ Dirección: %4
<source>Amount</source>
<translation>Cantidad</translation>
</message>
<message>
<source>Received with label</source>
<translation>Recibido con etiqueta</translation>
</message>
<message>
<source>Received with address</source>
<translation>Recibido con dirección</translation>
</message>
<message>
<source>Date</source>
<translation>Fecha</translation>
@ -1034,6 +1046,14 @@ Dirección: %4
<source>Map port using &amp;UPnP</source>
<translation>Mapear el puerto mediante &amp;UPnP</translation>
</message>
<message>
<source>Connect to the Bitcoin network through a SOCKS5 proxy.</source>
<translation>Conectarse a la red Bitcoin a través de un proxy SOCKS5.</translation>
</message>
<message>
<source>&amp;Connect through SOCKS5 proxy (default proxy):</source>
<translation>&amp;Conectarse a través de proxy SOCKS5 (proxy predeterminado):</translation>
</message>
<message>
<source>Proxy &amp;IP:</source>
<translation>Dirección &amp;IP del proxy:</translation>
@ -1824,6 +1844,50 @@ Dirección: %4
<source>Custom change address</source>
<translation>Dirección propia</translation>
</message>
<message>
<source>Transaction Fee:</source>
<translation>Comisión de Transacción:</translation>
</message>
<message>
<source>Minimize</source>
<translation>Minimizar</translation>
</message>
<message>
<source>per kilobyte</source>
<translation>por kilobyte</translation>
</message>
<message>
<source>total at least</source>
<translation>total por lo menos</translation>
</message>
<message>
<source>Recommended:</source>
<translation>Recomendado:</translation>
</message>
<message>
<source>Custom:</source>
<translation>Personalizado:</translation>
</message>
<message>
<source>(Smart fee not initialized yet. This usually takes a few blocks...)</source>
<translation>(Tarifa inteligente no inicializado aún. Esto generalmente lleva a pocos bloques...)</translation>
</message>
<message>
<source>Confirmation time:</source>
<translation>Tiempo de confirmación:</translation>
</message>
<message>
<source>normal</source>
<translation>normal</translation>
</message>
<message>
<source>fast</source>
<translation>rápido</translation>
</message>
<message>
<source>(confirmation may take longer)</source>
<translation>(confirmación puede tardar más tiempo)</translation>
</message>
<message>
<source>Send to multiple recipients at once</source>
<translation>Enviar a múltiples destinatarios de una vez</translation>
@ -1928,6 +1992,14 @@ Dirección: %4
<source>The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</source>
<translation>¡La transacción fue rechazada! Esto puede haber ocurrido si alguno de los bitcoins de su monedero ya estaba gastado o si ha usado una copia de wallet.dat y los bitcoins estaban gastados en la copia pero no se habían marcado como gastados aqui.</translation>
</message>
<message>
<source>Pay only the minimum fee of %1</source>
<translation>Paga sólo la cuota mínima de %1</translation>
</message>
<message>
<source>Estimated to begin confirmation within %1 block(s).</source>
<translation>Estimado para comenzar confirmación dentro de %1 bloque(s)</translation>
</message>
<message>
<source>Warning: Invalid Bitcoin address</source>
<translation>Alerta: Dirección de Bitcoin inválida</translation>
@ -2738,6 +2810,10 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
<source>Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup</source>
<translation>Borrar todas las transacciones del monedero y sólo recuperar aquellas partes de la cadena de bloques por medio de -rescan on startup.</translation>
</message>
<message>
<source>Distributed under the MIT software license, see the accompanying file COPYING or &lt;http://www.opensource.org/licenses/mit-license.php&gt;.</source>
<translation>Distribuido bajo la licencia de software MIT, vea la copia del archivo adjunto o &lt;http://www.opensource.org/licenses/mit-license.php&gt;.</translation>
</message>
<message>
<source>Enter regression test mode, which uses a special chain in which blocks can be solved instantly.</source>
<translation>Ingresar en el modo de prueba de regresión, que utiliza una cadena especial en la que los bloques se pueden resolver instantáneamente.</translation>

View file

@ -478,6 +478,10 @@
<source>Up to date</source>
<translation>Aggiornato</translation>
</message>
<message numerus="yes">
<source>Processed %n blocks of transaction history.</source>
<translation><numerusform>Processati %n blocchi dello storico transazioni.</numerusform><numerusform>Processati %n blocchi dello storico delle transazioni.</numerusform></translation>
</message>
<message>
<source>Catching up...</source>
<translation>In aggiornamento...</translation>
@ -521,6 +525,11 @@ Indirizzo: %4
</context>
<context>
<name>CoinControlDialog</name>
<message>
<source>Coin Selection</source>
<translation>Seleziona Moneta
</translation>
</message>
<message>
<source>Quantity:</source>
<translation>Quantità:</translation>
@ -569,6 +578,14 @@ Indirizzo: %4
<source>Amount</source>
<translation>Importo</translation>
</message>
<message>
<source>Received with label</source>
<translation>Ricevuto con etichetta</translation>
</message>
<message>
<source>Received with address</source>
<translation>Ricevuto con l'indirizzo</translation>
</message>
<message>
<source>Date</source>
<translation>Data</translation>
@ -1024,6 +1041,14 @@ Più URL vengono separati da una barra verticale |.</translation>
<source>Map port using &amp;UPnP</source>
<translation>Mappa le porte tramite &amp;UPnP</translation>
</message>
<message>
<source>Connect to the Bitcoin network through a SOCKS5 proxy.</source>
<translation>Connessione alla rete Bitcoin attraverso un proxy SOCKS5.</translation>
</message>
<message>
<source>&amp;Connect through SOCKS5 proxy (default proxy):</source>
<translation>&amp;Connessione attraverso proxy SOCKS5 (proxy predefinito):</translation>
</message>
<message>
<source>Proxy &amp;IP:</source>
<translation>&amp;IP del proxy:</translation>
@ -1187,6 +1212,10 @@ Più URL vengono separati da una barra verticale |.</translation>
<source>Mined balance in watch-only addresses that has not yet matured</source>
<translation>l'equilibrio estratto solo nello sguardo degli indirizzi non è ancora maturo </translation>
</message>
<message>
<source>Current total balance in watch-only addresses</source>
<translation>Saldo corrente totale negli indirizzi watch-only</translation>
</message>
<message>
<source>out of sync</source>
<translation>non sincronizzato</translation>
@ -1810,6 +1839,50 @@ Più URL vengono separati da una barra verticale |.</translation>
<source>Custom change address</source>
<translation>Personalizza indirizzo di resto</translation>
</message>
<message>
<source>Transaction Fee:</source>
<translation>Tasse di Transazione</translation>
</message>
<message>
<source>Choose...</source>
<translation>Scegli...</translation>
</message>
<message>
<source>Minimize</source>
<translation>Minimizza</translation>
</message>
<message>
<source>per kilobyte</source>
<translation>per kilobyte</translation>
</message>
<message>
<source>Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.</source>
<translation>Pagando solo la tariffa minima è bene finché c'è meno volume di transazioni di spazio nei blocchi. Ma essere consapevoli che questo può finire in una transazione non confermando ancora una volta non vi è più richiesta per le transazioni Bitcoin di rete in grado di elaborare.</translation>
</message>
<message>
<source>Recommended:</source>
<translation>Raccomandati:</translation>
</message>
<message>
<source>Custom:</source>
<translation>Personalizza:</translation>
</message>
<message>
<source>Confirmation time:</source>
<translation>Tempo di conferma:</translation>
</message>
<message>
<source>normal</source>
<translation>normale</translation>
</message>
<message>
<source>fast</source>
<translation>veloce</translation>
</message>
<message>
<source>Send as zero-fee transaction if possible</source>
<translation>Invia una transazione a zero commissioni se possibile</translation>
</message>
<message>
<source>Send to multiple recipients at once</source>
<translation>Invia a diversi beneficiari in una volta sola</translation>
@ -2940,6 +3013,22 @@ ad esempio: alertnotify=echo %%s | mail -s "Allarme Bitcoin" admin@foo.com
<source>Set maximum size of high-priority/low-fee transactions in bytes (default: %d)</source>
<translation>Imposta la dimensione massima in byte delle transazioni ad alta-priorità/basse-commissioni (predefinita: %d)</translation>
</message>
<message>
<source>Cannot resolve -whitebind address: '%s'</source>
<translation>Impossibile risolvere -whitebind address: '%s'</translation>
</message>
<message>
<source>Connect through SOCKS5 proxy</source>
<translation>Connetti attraverso SOCKS5 proxy</translation>
</message>
<message>
<source>Error loading wallet.dat: Wallet requires newer version of Bitcoin Core</source>
<translation>Errore caricamento wallet.dat: il wallet richiede una versione nuova di Bitcoin Core</translation>
</message>
<message>
<source>Fee (in BTC/kB) to add to transactions you send (default: %s)</source>
<translation>Commissione (in BTC/kB) da aggiungere alla transazione che invii (default: %s)</translation>
</message>
<message>
<source>Information</source>
<translation>Informazioni</translation>
@ -2980,6 +3069,10 @@ ad esempio: alertnotify=echo %%s | mail -s "Allarme Bitcoin" admin@foo.com
<source>Send trace/debug info to console instead of debug.log file</source>
<translation>Invia le informazioni di trace/debug alla console invece che al file debug.log</translation>
</message>
<message>
<source>Send transactions as zero-fee transactions if possible (default: %u)</source>
<translation>Invia transazioni a zero commissioni se possibile (default: %u)</translation>
</message>
<message>
<source>Show all debugging options (usage: --help -help-debug)</source>
<translation>Mostra tutte le opzioni di debug (utilizzo: --help -help-debug)</translation>
@ -3085,10 +3178,62 @@ ad esempio: alertnotify=echo %%s | mail -s "Allarme Bitcoin" admin@foo.com
<source>Error loading wallet.dat</source>
<translation>Errore caricamento wallet.dat</translation>
</message>
<message>
<source>Force safe mode (default: %u)</source>
<translation>Forza modalità provvisoria (dafault: %u)</translation>
</message>
<message>
<source>Generate coins (default: %u)</source>
<translation>Genera coins (default: %u)</translation>
</message>
<message>
<source>How many blocks to check at startup (default: %u, 0 = all)</source>
<translation>Quanti blocchi da controllare all'avvio (dafault: %u, 0 = tutti)</translation>
</message>
<message>
<source>Invalid -proxy address: '%s'</source>
<translation>Indirizzo -proxy non valido: '%s'</translation>
</message>
<message>
<source>Maintain at most &lt;n&gt; connections to peers (default: %u)</source>
<translation>Mantieni al massimo &lt;n&gt; connessioni ai peers (default: %u)</translation>
</message>
<message>
<source>Prepend debug output with timestamp (default: %u)</source>
<translation>Pretendi output di debug con timestamp (default: %u)</translation>
</message>
<message>
<source>Print block tree on startup (default: %u)</source>
<translation>Stampa l'albero dei blocchi all'avvio (default: %u)</translation>
</message>
<message>
<source>Server certificate file (default: %s)</source>
<translation>File certificato del server (default: %s)</translation>
</message>
<message>
<source>Server private key (default: %s)</source>
<translation>Chiave privata del server (default: %s)</translation>
</message>
<message>
<source>Specify configuration file (default: %s)</source>
<translation>Specifica il file di configurazione (default: %s)</translation>
</message>
<message>
<source>Specify connection timeout in milliseconds (minimum: 1, default: %d)</source>
<translation>Specifica il timeout di connessione in millisecondi (minimo:1, default: %d)</translation>
</message>
<message>
<source>Specify pid file (default: %s)</source>
<translation>Specifica il file pid (default: %s)</translation>
</message>
<message>
<source>Spend unconfirmed change when sending transactions (default: %u)</source>
<translation>Spendi il resto non confermato quando si inviano transazioni (default: %u)</translation>
</message>
<message>
<source>Stop running after importing blocks from disk (default: %u)</source>
<translation>Interrompi dopo aver importato i blocchi dal disco (default: %u)</translation>
</message>
<message>
<source>Unknown network specified in -onlynet: '%s'</source>
<translation>Rete sconosciuta specificata in -onlynet: '%s'</translation>

View file

@ -69,6 +69,10 @@
<source>These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins.</source>
<translation> Bitcoin </translation>
</message>
<message>
<source>These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction.</source>
<translation></translation>
</message>
<message>
<source>Copy &amp;Label</source>
<translation> (&amp;L)</translation>
@ -89,7 +93,11 @@
<source>Exporting Failed</source>
<translation></translation>
</message>
</context>
<message>
<source>There was an error trying to save the address list to %1. Please try again.</source>
<translation> %1 </translation>
</message>
</context>
<context>
<name>AddressTableModel</name>
<message>
@ -175,6 +183,10 @@
<source>Wallet encrypted</source>
<translation></translation>
</message>
<message>
<source>Enter the new passphrase to the wallet.&lt;br/&gt;Please use a passphrase of &lt;b&gt;ten or more random characters&lt;/b&gt;, or &lt;b&gt;eight or more words&lt;/b&gt;.</source>
<translation>&lt;br/&gt;&lt;b&gt;10&lt;/b&gt;&lt;b&gt;8&lt;/b&gt;使</translation>
</message>
<message>
<source>Bitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.</source>
<translation>Bitcoin </translation>
@ -282,6 +294,10 @@
<source>Open &amp;URI...</source>
<translation>URI (&amp;U)...</translation>
</message>
<message>
<source>Bitcoin Core client</source>
<translation>Bitcoinコア </translation>
</message>
<message>
<source>Importing blocks from disk...</source>
<translation>...</translation>
@ -334,6 +350,10 @@
<source>&amp;Receive</source>
<translation> (&amp;R)</translation>
</message>
<message>
<source>Show information about Bitcoin Core</source>
<translation>Bitcoinコアに関する情報を表示</translation>
</message>
<message>
<source>&amp;Show / Hide</source>
<translation>/ (&amp;S)</translation>
@ -374,10 +394,18 @@
<source>Bitcoin Core</source>
<translation>Bitcoin </translation>
</message>
<message>
<source>Request payments (generates QR codes and bitcoin: URIs)</source>
<translation> (QRコードとbitcoin:ではじまるURIを生成する)</translation>
</message>
<message>
<source>&amp;About Bitcoin Core</source>
<translation> (&amp;A)</translation>
</message>
<message>
<source>Show the list of used sending addresses and labels</source>
<translation>使</translation>
</message>
<message>
<source>Show the list of used receiving addresses and labels</source>
<translation></translation>
@ -483,6 +511,10 @@ Address: %4
</context>
<context>
<name>CoinControlDialog</name>
<message>
<source>Coin Selection</source>
<translation></translation>
</message>
<message>
<source>Quantity:</source>
<translation>:</translation>
@ -555,6 +587,14 @@ Address: %4
<source>Copy transaction ID</source>
<translation> ID </translation>
</message>
<message>
<source>Lock unspent</source>
<translation>使</translation>
</message>
<message>
<source>Unlock unspent</source>
<translation>使</translation>
</message>
<message>
<source>Copy quantity</source>
<translation></translation>
@ -676,6 +716,10 @@ Address: %4
<source>version</source>
<translation></translation>
</message>
<message>
<source>About Bitcoin Core</source>
<translation>Bitcoinコアについて</translation>
</message>
<message>
<source>Command-line options</source>
<translation> </translation>
@ -735,7 +779,15 @@ Address: %4
<source>Error</source>
<translation></translation>
</message>
</context>
<message numerus="yes">
<source>%n GB of free space available</source>
<translation><numerusform>%n GBの空き容量が利用可能</numerusform></translation>
</message>
<message numerus="yes">
<source>(of %n GB needed)</source>
<translation><numerusform>(%n GB必要)</numerusform></translation>
</message>
</context>
<context>
<name>OpenURIDialog</name>
<message>
@ -785,6 +837,14 @@ Address: %4
<source>MB</source>
<translation>MB</translation>
</message>
<message>
<source>Number of script &amp;verification threads</source>
<translation> (&amp;V)</translation>
</message>
<message>
<source>Accept connections from outside</source>
<translation></translation>
</message>
<message>
<source>IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)</source>
<translation>IPアドレス ( IPv4: 127.0.0.1 / IPv6: ::1)</translation>
@ -932,6 +992,14 @@ Address: %4
<source>Your current total balance</source>
<translation></translation>
</message>
<message>
<source>Recent transactions</source>
<translation></translation>
</message>
<message>
<source>Mined balance in watch-only addresses that has not yet matured</source>
<translation></translation>
</message>
<message>
<source>out of sync</source>
<translation></translation>
@ -947,6 +1015,14 @@ Address: %4
<source>Invalid payment address %1</source>
<translation>%1</translation>
</message>
<message>
<source>Payment request rejected</source>
<translation></translation>
</message>
<message>
<source>Payment request has expired.</source>
<translation></translation>
</message>
<message>
<source>Payment request error</source>
<translation></translation>
@ -974,6 +1050,10 @@ Address: %4
</context>
<context>
<name>PeerTableModel</name>
<message>
<source>User Agent</source>
<translation></translation>
</message>
</context>
<context>
<name>QObject</name>
@ -1063,6 +1143,10 @@ Address: %4
<source>Current number of blocks</source>
<translation></translation>
</message>
<message>
<source>User Agent</source>
<translation></translation>
</message>
<message>
<source>Last block time</source>
<translation></translation>
@ -1154,6 +1238,10 @@ Address: %4
<source>&amp;Message:</source>
<translation> (&amp;M):</translation>
</message>
<message>
<source>Clear all fields of the form.</source>
<translation></translation>
</message>
<message>
<source>Clear</source>
<translation></translation>
@ -1162,6 +1250,10 @@ Address: %4
<source>Show</source>
<translation></translation>
</message>
<message>
<source>Remove the selected entries from the list</source>
<translation></translation>
</message>
<message>
<source>Copy label</source>
<translation></translation>
@ -1307,6 +1399,10 @@ Address: %4
<source>Add &amp;Recipient</source>
<translation> (&amp;R)</translation>
</message>
<message>
<source>Clear all fields of the form.</source>
<translation></translation>
</message>
<message>
<source>Clear &amp;All</source>
<translation> (&amp;A)</translation>
@ -1433,7 +1529,15 @@ Address: %4
</context>
<context>
<name>ShutdownWindow</name>
</context>
<message>
<source>Bitcoin Core is shutting down...</source>
<translation>Bitcoin Coreをシャットダウンしています</translation>
</message>
<message>
<source>Do not shut down the computer until this window disappears.</source>
<translation></translation>
</message>
</context>
<context>
<name>SignVerifyMessageDialog</name>
<message>
@ -1956,7 +2060,11 @@ Address: %4
</context>
<context>
<name>WalletFrame</name>
</context>
<message>
<source>No wallet has been loaded.</source>
<translation></translation>
</message>
</context>
<context>
<name>WalletModel</name>
<message>

View file

@ -9,10 +9,22 @@
<source>Create a new address</source>
<translation>Жаңа адрес енгізу</translation>
</message>
<message>
<source>&amp;New</source>
<translation>Жаңа</translation>
</message>
<message>
<source>Copy the currently selected address to the system clipboard</source>
<translation>Таңдаған адресті тізімнен жою</translation>
</message>
<message>
<source>C&amp;lose</source>
<translation>Жабу</translation>
</message>
<message>
<source>&amp;Export</source>
<translation>Экспорт</translation>
</message>
<message>
<source>&amp;Delete</source>
<translation>Жою</translation>
@ -78,12 +90,140 @@
</context>
<context>
<name>BitcoinGUI</name>
<message>
<source>&amp;Transactions</source>
<translation>&amp;Транзакциялар</translation>
</message>
<message>
<source>E&amp;xit</source>
<translation>Шығу</translation>
</message>
<message>
<source>&amp;Options...</source>
<translation>Параметрлері</translation>
</message>
<message>
<source>&amp;Backup Wallet...</source>
<translation>Әмиянды жасыру</translation>
</message>
<message>
<source>&amp;Change Passphrase...</source>
<translation>Құпия сөзді өзгерту</translation>
</message>
<message>
<source>Bitcoin</source>
<translation>Биткоин</translation>
</message>
<message>
<source>Wallet</source>
<translation>Әмиян</translation>
</message>
<message>
<source>&amp;Send</source>
<translation>Жіберу</translation>
</message>
<message>
<source>&amp;Receive</source>
<translation>Алу</translation>
</message>
<message>
<source>&amp;File</source>
<translation>Файл</translation>
</message>
<message>
<source>&amp;Help</source>
<translation>Көмек</translation>
</message>
<message numerus="yes">
<source>%n hour(s)</source>
<translation><numerusform>%n сағат</numerusform></translation>
</message>
<message numerus="yes">
<source>%n day(s)</source>
<translation><numerusform>%n күн</numerusform></translation>
</message>
<message numerus="yes">
<source>%n week(s)</source>
<translation><numerusform>%n апта</numerusform></translation>
</message>
<message>
<source>%1 and %2</source>
<translation>%1 немесе %2</translation>
</message>
<message numerus="yes">
<source>%n year(s)</source>
<translation><numerusform>%n жыл</numerusform></translation>
</message>
<message>
<source>%1 behind</source>
<translation>%1 қалмады</translation>
</message>
<message>
<source>Error</source>
<translation>қате</translation>
</message>
<message>
<source>Warning</source>
<translation>Ескерту</translation>
</message>
<message>
<source>Information</source>
<translation>Информация</translation>
</message>
<message>
<source>Up to date</source>
<translation>Жаңартылған</translation>
</message>
</context>
<context>
<name>ClientModel</name>
</context>
<context>
<name>CoinControlDialog</name>
<message>
<source>Amount:</source>
<translation>Саны</translation>
</message>
<message>
<source>Priority:</source>
<translation>Басымдық</translation>
</message>
<message>
<source>Fee:</source>
<translation>Комиссия</translation>
</message>
<message>
<source>Dust:</source>
<translation>Шаң</translation>
</message>
<message>
<source>After Fee:</source>
<translation>Комиссия алу кейін</translation>
</message>
<message>
<source>Amount</source>
<translation>Саны</translation>
</message>
<message>
<source>Date</source>
<translation>Күні</translation>
</message>
<message>
<source>Confirmations</source>
<translation>Растау саны</translation>
</message>
<message>
<source>Confirmed</source>
<translation>Растық</translation>
</message>
<message>
<source>Priority</source>
<translation>Басымдық</translation>
</message>
<message>
<source>no</source>
<translation>жоқ</translation>
</message>
<message>
<source>(no label)</source>
<translation>(таңбасыз)</translation>
@ -91,6 +231,10 @@
</context>
<context>
<name>EditAddressDialog</name>
<message>
<source>&amp;Address</source>
<translation>Адрес</translation>
</message>
</context>
<context>
<name>FreespaceChecker</name>
@ -100,6 +244,10 @@
</context>
<context>
<name>Intro</name>
<message>
<source>Error</source>
<translation>қате</translation>
</message>
</context>
<context>
<name>OpenURIDialog</name>
@ -118,6 +266,10 @@
</context>
<context>
<name>QObject</name>
<message>
<source>Amount</source>
<translation>Саны</translation>
</message>
</context>
<context>
<name>QRImageWidget</name>
@ -134,6 +286,10 @@
<source>Address</source>
<translation>Адрес</translation>
</message>
<message>
<source>Amount</source>
<translation>Саны</translation>
</message>
<message>
<source>Label</source>
<translation>таңба</translation>
@ -141,10 +297,18 @@
</context>
<context>
<name>RecentRequestsTableModel</name>
<message>
<source>Date</source>
<translation>Күні</translation>
</message>
<message>
<source>Label</source>
<translation>таңба</translation>
</message>
<message>
<source>Amount</source>
<translation>Саны</translation>
</message>
<message>
<source>(no label)</source>
<translation>(таңбасыз)</translation>
@ -152,6 +316,26 @@
</context>
<context>
<name>SendCoinsDialog</name>
<message>
<source>Amount:</source>
<translation>Саны</translation>
</message>
<message>
<source>Priority:</source>
<translation>Басымдық</translation>
</message>
<message>
<source>Fee:</source>
<translation>Комиссия:</translation>
</message>
<message>
<source>After Fee:</source>
<translation>Комиссия алу кейін:</translation>
</message>
<message>
<source>Dust:</source>
<translation>Шаң</translation>
</message>
<message>
<source>(no label)</source>
<translation>(таңбасыз)</translation>
@ -174,12 +358,24 @@
</context>
<context>
<name>TransactionDesc</name>
<message>
<source>Date</source>
<translation>Күні</translation>
</message>
<message>
<source>Amount</source>
<translation>Саны</translation>
</message>
</context>
<context>
<name>TransactionDescDialog</name>
</context>
<context>
<name>TransactionTableModel</name>
<message>
<source>Date</source>
<translation>Күні</translation>
</message>
<message>
<source>Address</source>
<translation>Адрес</translation>
@ -191,6 +387,14 @@
<source>Comma separated file (*.csv)</source>
<translation>Үтірмен бөлінген файл (*.csv)</translation>
</message>
<message>
<source>Confirmed</source>
<translation>Растық</translation>
</message>
<message>
<source>Date</source>
<translation>Күні</translation>
</message>
<message>
<source>Label</source>
<translation>таңба</translation>
@ -211,9 +415,17 @@
</context>
<context>
<name>WalletView</name>
<message>
<source>&amp;Export</source>
<translation>Экспорт</translation>
</message>
</context>
<context>
<name>bitcoin-core</name>
<message>
<source>Information</source>
<translation>Информация</translation>
</message>
<message>
<source>Transaction amount too small</source>
<translation>Транзакция өте кішкентай</translation>
@ -222,5 +434,13 @@
<source>Transaction too large</source>
<translation>Транзакция өте үлкен</translation>
</message>
</context>
<message>
<source>Warning</source>
<translation>Ескерту</translation>
</message>
<message>
<source>Error</source>
<translation>қате</translation>
</message>
</context>
</TS>

View file

@ -67,7 +67,7 @@
</message>
<message>
<source>These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins.</source>
<translation>Dit zijn uw Bitcoinadressen om betalingen mee te verzenden. Check altijd het bedrag en het ontvangende adres voordat u uw bitcoins verzendt.</translation>
<translation>Dit zijn uw Bitcoinadressen om betalingen mee te verzenden. Controleer altijd het bedrag en het ontvangende adres voordat u uw bitcoins verzendt.</translation>
</message>
<message>
<source>These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction.</source>
@ -478,6 +478,10 @@
<source>Up to date</source>
<translation>Bijgewerkt</translation>
</message>
<message numerus="yes">
<source>Processed %n blocks of transaction history.</source>
<translation><numerusform>%n Blok verwerkt van transactie geschiedenis.</numerusform><numerusform>%n Blokken verwerkt van transactie geschiedenis.</numerusform></translation>
</message>
<message>
<source>Catching up...</source>
<translation>Aan het bijwerken...</translation>
@ -520,6 +524,10 @@ Adres: %4
</context>
<context>
<name>CoinControlDialog</name>
<message>
<source>Coin Selection</source>
<translation>Munt Selectie</translation>
</message>
<message>
<source>Quantity:</source>
<translation>Kwantiteit</translation>
@ -568,6 +576,14 @@ Adres: %4
<source>Amount</source>
<translation>Bedrag</translation>
</message>
<message>
<source>Received with label</source>
<translation>Ontvangen met label</translation>
</message>
<message>
<source>Received with address</source>
<translation>Ontvangen met adres</translation>
</message>
<message>
<source>Date</source>
<translation>Datum</translation>
@ -904,7 +920,11 @@ Adres: %4
<source>%n GB of free space available</source>
<translation><numerusform>%n GB aan vrije oplsagruimte beschikbaar</numerusform><numerusform>%n GB aan vrije oplsagruimte beschikbaar</numerusform></translation>
</message>
</context>
<message numerus="yes">
<source>(of %n GB needed)</source>
<translation><numerusform>(van %n GB nodig)</numerusform><numerusform>(van %n GB nodig)</numerusform></translation>
</message>
</context>
<context>
<name>OpenURIDialog</name>
<message>
@ -1026,6 +1046,14 @@ Adres: %4
<source>Map port using &amp;UPnP</source>
<translation>Portmapping via &amp;UPnP</translation>
</message>
<message>
<source>Connect to the Bitcoin network through a SOCKS5 proxy.</source>
<translation>Verbind met het Bitcoin netwerk via een SOCKS5 proxy.</translation>
</message>
<message>
<source>&amp;Connect through SOCKS5 proxy (default proxy):</source>
<translation>&amp;Verbind via een SOCKS5-proxy (standaardproxy):</translation>
</message>
<message>
<source>Proxy &amp;IP:</source>
<translation>Proxy &amp;IP:</translation>
@ -1157,6 +1185,10 @@ Adres: %4
<source>Mined balance that has not yet matured</source>
<translation>Gedolven saldo dat nog niet tot wasdom is gekomen</translation>
</message>
<message>
<source>Balances</source>
<translation>Saldi</translation>
</message>
<message>
<source>Total:</source>
<translation>Totaal:</translation>
@ -1165,10 +1197,30 @@ Adres: %4
<source>Your current total balance</source>
<translation>Uw totale saldo</translation>
</message>
<message>
<source>Your current balance in watch-only addresses</source>
<translation>Uw huidige balans in alleen-bekijkbare adressen</translation>
</message>
<message>
<source>Spendable:</source>
<translation>Besteedbaar:</translation>
</message>
<message>
<source>Recent transactions</source>
<translation>Recente transacties</translation>
</message>
<message>
<source>Unconfirmed transactions to watch-only addresses</source>
<translation>Onbevestigde transacties naar alleen-bekijkbare adressen</translation>
</message>
<message>
<source>Mined balance in watch-only addresses that has not yet matured</source>
<translation>Ontgonnen saldo dat nog niet tot wasdom is gekomen</translation>
</message>
<message>
<source>Current total balance in watch-only addresses</source>
<translation>Huidige balans in alleen-bekijkbare adressen.</translation>
</message>
<message>
<source>out of sync</source>
<translation>niet gesynchroniseerd</translation>
@ -1188,10 +1240,18 @@ Adres: %4
<source>Payment request rejected</source>
<translation>Betalingsverzoek geweigerd</translation>
</message>
<message>
<source>Payment request network doesn't match client network.</source>
<translation>Betalingsaanvraagnetwerk komt niet overeen met klantennetwerk.</translation>
</message>
<message>
<source>Payment request has expired.</source>
<translation>Betalingsverzoek is verlopen.</translation>
</message>
<message>
<source>Payment request is not initialized.</source>
<translation>Betalingsaanvraag is niet geïnitialiseerd.</translation>
</message>
<message>
<source>Requested payment amount of %1 is too small (considered dust).</source>
<translation>Het gevraagde betalingsbedrag van %1 is te weinig (beschouwd als stof).</translation>
@ -1208,10 +1268,18 @@ Adres: %4
<source>Payment request fetch URL is invalid: %1</source>
<translation>URL om betalingsverzoek te verkrijgen is ongeldig: %1</translation>
</message>
<message>
<source>URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters.</source>
<translation>URI kan niet verwerkt worden! Dit kan het gevolg zijn van een ongeldig Bitcoin adres of misvormde URI parameters.</translation>
</message>
<message>
<source>Payment request file handling</source>
<translation>Betalingsverzoek bestandsafhandeling</translation>
</message>
<message>
<source>Payment request file cannot be read! This can be caused by an invalid payment request file.</source>
<translation>Betalingsverzoek-bestand kan niet gelezen of verwerkt worden! Dit kan veroorzaakt worden door een ongeldig betalingsverzoek-bestand.</translation>
</message>
<message>
<source>Unverified payment requests to custom payment scripts are unsupported.</source>
<translation>Niet-geverifieerde betalingsverzoeken naar aangepaste betaling scripts worden niet ondersteund.</translation>
@ -1224,6 +1292,10 @@ Adres: %4
<source>Error communicating with %1: %2</source>
<translation>Fout bij communiceren met %1: %2</translation>
</message>
<message>
<source>Payment request cannot be parsed!</source>
<translation>Betalingsverzoek kan niet juist worden ontleed of verwerkt!</translation>
</message>
<message>
<source>Bad response from server %1</source>
<translation>Ongeldige respons van server %1</translation>
@ -1243,7 +1315,15 @@ Adres: %4
<source>User Agent</source>
<translation>User Agent</translation>
</message>
</context>
<message>
<source>Address/Hostname</source>
<translation>Adres/Hostnaam</translation>
</message>
<message>
<source>Ping Time</source>
<translation>Ping tijd</translation>
</message>
</context>
<context>
<name>QObject</name>
<message>
@ -1340,6 +1420,10 @@ Adres: %4
<source>Using OpenSSL version</source>
<translation>Gebruikt OpenSSL versie</translation>
</message>
<message>
<source>Using BerkeleyDB version</source>
<translation>Gebruikt BerkeleyDB versie</translation>
</message>
<message>
<source>Startup time</source>
<translation>Opstarttijd</translation>
@ -1372,6 +1456,14 @@ Adres: %4
<source>Sent</source>
<translation>Verstuurd</translation>
</message>
<message>
<source>&amp;Peers</source>
<translation>&amp;Peers</translation>
</message>
<message>
<source>Select a peer to view detailed information.</source>
<translation>Selecteer een peer om gedetailleerde informatie te bekijken.</translation>
</message>
<message>
<source>Direction</source>
<translation>Directie</translation>
@ -1388,6 +1480,18 @@ Adres: %4
<source>Services</source>
<translation>Services</translation>
</message>
<message>
<source>Starting Height</source>
<translation>Aanvangshoogte</translation>
</message>
<message>
<source>Sync Height</source>
<translation>Synchronisatiehoogte</translation>
</message>
<message>
<source>Ban Score</source>
<translation>Ban score</translation>
</message>
<message>
<source>Connection Time</source>
<translation>Connectie tijd</translation>
@ -1408,6 +1512,10 @@ Adres: %4
<source>Bytes Received</source>
<translation>Bytes Ontvangen</translation>
</message>
<message>
<source>Ping Time</source>
<translation>Ping Tijd</translation>
</message>
<message>
<source>Last block time</source>
<translation>Tijd laatste blok</translation>
@ -1492,11 +1600,23 @@ Adres: %4
<source>never</source>
<translation>nooit</translation>
</message>
<message>
<source>Inbound</source>
<translation>Inkomend</translation>
</message>
<message>
<source>Outbound</source>
<translation>Uitgaand</translation>
</message>
<message>
<source>Unknown</source>
<translation>Onbekend</translation>
</message>
</context>
<message>
<source>Fetching...</source>
<translation>Ophalen...</translation>
</message>
</context>
<context>
<name>ReceiveCoinsDialog</name>
<message>
@ -1724,6 +1844,50 @@ Adres: %4
<source>Custom change address</source>
<translation>Aangepast wisselgeldadres</translation>
</message>
<message>
<source>Transaction Fee:</source>
<translation>Transactiekosten:</translation>
</message>
<message>
<source>Choose...</source>
<translation>Kies...</translation>
</message>
<message>
<source>Minimize</source>
<translation>Minimaliseer</translation>
</message>
<message>
<source>per kilobyte</source>
<translation>per kilobyte</translation>
</message>
<message>
<source>total at least</source>
<translation>totaal ten minste</translation>
</message>
<message>
<source>Recommended:</source>
<translation>Aanbevolen:</translation>
</message>
<message>
<source>Custom:</source>
<translation>Handmatig:</translation>
</message>
<message>
<source>Confirmation time:</source>
<translation>Bevestigings tijd:</translation>
</message>
<message>
<source>normal</source>
<translation>normaal</translation>
</message>
<message>
<source>fast</source>
<translation>snel</translation>
</message>
<message>
<source>(confirmation may take longer)</source>
<translation>(bevestiging kan langer duren)</translation>
</message>
<message>
<source>Send to multiple recipients at once</source>
<translation>Verstuur aan verschillende ontvangers ineens</translation>
@ -1828,6 +1992,18 @@ Adres: %4
<source>The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</source>
<translation>De transactie was afgewezen. Dit kan gebeuren als u eerder uitgegeven munten opnieuw wilt versturen, zoals wanneer u een kopie van uw wallet.dat heeft gebruikt en in de kopie deze munten zijn gemarkeerd als uitgegeven, maar in de huidige nog niet.</translation>
</message>
<message>
<source>A fee higher than %1 is considered an insanely high fee.</source>
<translation>Transactiekosten hoger dan %1 worden gezien als waanzinnig hoog.</translation>
</message>
<message>
<source>Pay only the minimum fee of %1</source>
<translation>Betaal alleen de minimale transactiekosten van %1</translation>
</message>
<message>
<source>Estimated to begin confirmation within %1 block(s).</source>
<translation>Beginnen van bevesting geschat binnen %1 blok(ken).</translation>
</message>
<message>
<source>Warning: Invalid Bitcoin address</source>
<translation>Waarschuwing: Ongeldig Bitcoin adres</translation>
@ -1879,6 +2055,10 @@ Adres: %4
<source>This is a normal payment.</source>
<translation>Dit is een normale betaling.</translation>
</message>
<message>
<source>The Bitcoin address to send the payment to</source>
<translation>Het Bitcoin adres om betaling aan te voldoen</translation>
</message>
<message>
<source>Alt+A</source>
<translation>Alt+A</translation>
@ -1949,6 +2129,10 @@ Adres: %4
<source>You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.</source>
<translation>U kunt berichten ondertekenen met een van uw adressen om te bewijzen dat u dit adres bezit. Pas op dat u geen onduidelijke dingen ondertekent, want phishingaanvallen zouden u kunnen misleiden om zo uw identiteit te stelen. Onderteken alleen berichten waarmee u het volledig eens bent.</translation>
</message>
<message>
<source>The Bitcoin address to sign the message with</source>
<translation>Het Bitcoin adres om bericht mee te ondertekenen</translation>
</message>
<message>
<source>Choose previously used address</source>
<translation>Kies een eerder gebruikt adres</translation>
@ -2001,6 +2185,10 @@ Adres: %4
<source>Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack.</source>
<translation>Voer het ondertekenende adres, bericht en handtekening hieronder in (let erop dat u nieuwe regels, spaties en tabs juist overneemt) om de handtekening te verifiëren. Let erop dat u niet meer uit het bericht interpreteert dan er daadwerkelijk staat, om te voorkomen dat u wordt misleid in een man-in-the-middle-aanval.</translation>
</message>
<message>
<source>The Bitcoin address the message was signed with</source>
<translation>Het Bitcoin adres waarmee het bericht ondertekend is</translation>
</message>
<message>
<source>Verify the message to ensure it was signed with the specified Bitcoin address</source>
<translation>Controleer een bericht om te verifiëren dat het gespecificeerde Bitcoinadres het bericht heeft ondertekend.</translation>
@ -2142,6 +2330,10 @@ Adres: %4
<source>own address</source>
<translation>eigen adres</translation>
</message>
<message>
<source>watch-only</source>
<translation>alleen-bekijkbaar</translation>
</message>
<message>
<source>label</source>
<translation>label</translation>
@ -2162,6 +2354,14 @@ Adres: %4
<source>Debit</source>
<translation>Debet</translation>
</message>
<message>
<source>Total debit</source>
<translation>Totaal debit</translation>
</message>
<message>
<source>Total credit</source>
<translation>Totaal credit</translation>
</message>
<message>
<source>Transaction fee</source>
<translation>Transactiekosten</translation>
@ -2312,6 +2512,10 @@ Adres: %4
<source>Mined</source>
<translation>Gedolven</translation>
</message>
<message>
<source>watch-only</source>
<translation>alleen-bekijkbaar</translation>
</message>
<message>
<source>(n/a)</source>
<translation>(nvt)</translation>
@ -2423,6 +2627,10 @@ Adres: %4
<source>Export Transaction History</source>
<translation>Exporteer Transactieverleden</translation>
</message>
<message>
<source>Watch-only</source>
<translation>Alleen-bekijkbaar</translation>
</message>
<message>
<source>Exporting Failed</source>
<translation>Export Mislukt</translation>
@ -2478,7 +2686,11 @@ Adres: %4
</context>
<context>
<name>UnitDisplayStatusBarControl</name>
</context>
<message>
<source>Unit to show amounts in. Click to select another unit.</source>
<translation>Eenheid om bedragen uit te drukken. Klik om een andere eenheid te selecteren.</translation>
</message>
</context>
<context>
<name>WalletFrame</name>
<message>
@ -2752,6 +2964,10 @@ bijvoorbeeld: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</tran
<source>This is intended for regression testing tools and app development.</source>
<translation>Dit is bedoeld voor regressie test toepassingen en applicatie onwikkeling.</translation>
</message>
<message>
<source>Use UPnP to map the listening port (default: %u)</source>
<translation>Gebruik UPnP om de luisterende poort te mappen (standaard: %u)</translation>
</message>
<message>
<source>Verifying blocks...</source>
<translation>Blokken aan het controleren...</translation>
@ -2788,6 +3004,10 @@ bijvoorbeeld: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</tran
<source>Set maximum size of high-priority/low-fee transactions in bytes (default: %d)</source>
<translation>Stel maximumgrootte in bytes in voor hoge-prioriteits-/lage-transactiekosten-transacties (standaard: %d)</translation>
</message>
<message>
<source>Error loading wallet.dat: Wallet requires newer version of Bitcoin Core</source>
<translation>Fout bij laden wallet.dat: Portemonnee vereist een nieuwere versie van Bitcoin Core</translation>
</message>
<message>
<source>Information</source>
<translation>Informatie</translation>
@ -2800,6 +3020,18 @@ bijvoorbeeld: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</tran
<source>Invalid amount for -mintxfee=&lt;amount&gt;: '%s'</source>
<translation>Ongeldig bedrag voor -mintxfee=&lt;bedrag&gt;: '%s'</translation>
</message>
<message>
<source>Invalid amount for -paytxfee=&lt;amount&gt;: '%s' (must be at least %s)</source>
<translation>Ongeldig bedrag voor -paytxfee=&lt;bedrag&gt;: '%s' (Minimum %s)</translation>
</message>
<message>
<source>Keep at most &lt;n&gt; unconnectable blocks in memory (default: %u)</source>
<translation>Houd maximaal &lt;n&gt; onverbonden blokken in geheugen (standaard: %u)</translation>
</message>
<message>
<source>Keep at most &lt;n&gt; unconnectable transactions in memory (default: %u)</source>
<translation>Houd maximaal &lt;n&gt; onverbonden transacties in geheugen (standaard: %u)</translation>
</message>
<message>
<source>Print block on startup, if found in block index</source>
<translation>Toon block bij opstarten, wanneer gevonden in block index</translation>
@ -2916,14 +3148,134 @@ bijvoorbeeld: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</tran
<source>Error loading wallet.dat: Wallet corrupted</source>
<translation>Fout bij laden wallet.dat: Portemonnee corrupt</translation>
</message>
<message>
<source>Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)</source>
<translation>Onderhoud een volledige transactieindex, gebruikt door de getrawtransaction rpc call (standaard: %u)</translation>
</message>
<message>
<source>Number of seconds to keep misbehaving peers from reconnecting (default: %u)</source>
<translation>Aantal seconden dat zich misdragende peers niet opnieuw kunnen verbinden (standaard: %u)</translation>
</message>
<message>
<source>Output debugging information (default: %u, supplying &lt;category&gt; is optional)</source>
<translation>Output extra debugginginformatie (standaard: %u, het leveren van &lt;category&gt; is optioneel)</translation>
</message>
<message>
<source>Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)</source>
<translation>Gebruik een aparte SOCKS5 proxy om 'Tor hidden services' te bereiken (standaard: %s)</translation>
</message>
<message>
<source>Always query for peer addresses via DNS lookup (default: %u)</source>
<translation>Vind anderen door middel van een DNS-naslag (standaard: %u)</translation>
</message>
<message>
<source>Disable safemode, override a real safe mode event (default: %u)</source>
<translation>Veilige modus uitschakelen, hef een echte veilige modus gebeurtenis uit (default: %u)</translation>
</message>
<message>
<source>Error loading wallet.dat</source>
<translation>Fout bij laden wallet.dat</translation>
</message>
<message>
<source>Force safe mode (default: %u)</source>
<translation>Forceer veilige modus (default: %u)</translation>
</message>
<message>
<source>Generate coins (default: %u)</source>
<translation>Genereer munten (standaard: %u)</translation>
</message>
<message>
<source>How many blocks to check at startup (default: %u, 0 = all)</source>
<translation>Aantal te checken blokken bij het opstarten (standaard: %u, 0 = allemaal)</translation>
</message>
<message>
<source>Invalid -proxy address: '%s'</source>
<translation>Ongeldig -proxy adres: '%s'</translation>
</message>
<message>
<source>Limit size of signature cache to &lt;n&gt; entries (default: %u)</source>
<translation>Limiteer grootte van de handtekening cache tot &lt;n&gt; entries (default: %u)</translation>
</message>
<message>
<source>Listen for JSON-RPC connections on &lt;port&gt; (default: %u or testnet: %u)</source>
<translation>Luister naar JSON-RPC-verbindingen op poort &lt;port&gt; (standaard: %u of testnet: %u)</translation>
</message>
<message>
<source>Listen for connections on &lt;port&gt; (default: %u or testnet: %u)</source>
<translation>Luister naar verbindingen op &lt;poort&gt; (standaard: %u of testnet: %u)</translation>
</message>
<message>
<source>Maintain at most &lt;n&gt; connections to peers (default: %u)</source>
<translation>Onderhoud maximaal &lt;n&gt; verbindingen naar peers (standaard: %u)</translation>
</message>
<message>
<source>Maximum per-connection receive buffer, &lt;n&gt;*1000 bytes (default: %u)</source>
<translation>Maximum per-connectie ontvangstbuffer, &lt;n&gt;*1000 bytes (standaard: %u)</translation>
</message>
<message>
<source>Maximum per-connection send buffer, &lt;n&gt;*1000 bytes (default: %u)</source>
<translation>Maximum per-connectie zendbuffer, &lt;n&gt;*1000 bytes (standaard: %u)</translation>
</message>
<message>
<source>Only accept block chain matching built-in checkpoints (default: %u)</source>
<translation>Accepteer alleen blokkenketen die overeenkomt met de ingebouwde checkpoints (standaard: %u)</translation>
</message>
<message>
<source>Prepend debug output with timestamp (default: %u)</source>
<translation>Prepend debug output met tijdstempel (standaard: %u)</translation>
</message>
<message>
<source>Print block tree on startup (default: %u)</source>
<translation>Toon block structuur bij opstarten (default: %u)</translation>
</message>
<message>
<source>Run a thread to flush wallet periodically (default: %u)</source>
<translation>Draai een proces om de wallet periodiek te flushen (default: %u)</translation>
</message>
<message>
<source>Server certificate file (default: %s)</source>
<translation>Certificaat-bestand voor server (standaard: %s)</translation>
</message>
<message>
<source>Server private key (default: %s)</source>
<translation>Geheime sleutel voor server (standaard: %s)</translation>
</message>
<message>
<source>Set key pool size to &lt;n&gt; (default: %u)</source>
<translation>Stel sleutelpoelgrootte in op &lt;&amp;&gt; (standaard: %u)</translation>
</message>
<message>
<source>Set minimum block size in bytes (default: %u)</source>
<translation>Stel minimum blokgrootte in in bytes (standaard: %u)</translation>
</message>
<message>
<source>Set the number of threads to service RPC calls (default: %d)</source>
<translation>Stel het aantal threads in om RPC-aanvragen mee te bedienen (standaard: %d)</translation>
</message>
<message>
<source>Sets the DB_PRIVATE flag in the wallet db environment (default: %u)</source>
<translation>Plaatst de DB_PRIVATE vlag in de wallet db omgeving (default: %u)</translation>
</message>
<message>
<source>Specify configuration file (default: %s)</source>
<translation>Specificeer configuratie bestand (standaard: %s)</translation>
</message>
<message>
<source>Specify connection timeout in milliseconds (minimum: 1, default: %d)</source>
<translation>Specificeer de time-out tijd in milliseconden (minimum: 1, standaard: %d)</translation>
</message>
<message>
<source>Specify pid file (default: %s)</source>
<translation>Specificeer pid-bestand (standaard: %s)</translation>
</message>
<message>
<source>Spend unconfirmed change when sending transactions (default: %u)</source>
<translation>Besteed onbevestigd wisselgeld bij het versturen van transacties (standaard: %u)</translation>
</message>
<message>
<source>Threshold for disconnecting misbehaving peers (default: %u)</source>
<translation>Drempel om verbinding te verbreken naar zich misdragende peers (standaard: %u)</translation>
</message>
<message>
<source>Unknown network specified in -onlynet: '%s'</source>
<translation>Onbekend netwerk gespecificeerd in -onlynet: '%s'</translation>

View file

@ -773,6 +773,10 @@ Adresa: %4
<source>version</source>
<translation>versiunea</translation>
</message>
<message>
<source>(%1-bit)</source>
<translation>(%1-bit)</translation>
</message>
<message>
<source>About Bitcoin Core</source>
<translation>Despre Nucleul Bitcoin</translation>

View file

@ -520,6 +520,10 @@ Address: %4
</context>
<context>
<name>CoinControlDialog</name>
<message>
<source>Coin Selection</source>
<translation>Выбор монет</translation>
</message>
<message>
<source>Quantity:</source>
<translation>Количество:</translation>
@ -1844,17 +1848,37 @@ Address: %4
<source>Choose...</source>
<translation>Выберите...</translation>
</message>
<message>
<source>collapse fee-settings</source>
<translation>Свернуть настройки комиссии</translation>
</message>
<message>
<source>Minimize</source>
<translation>Сворачивать</translation>
</message>
<message>
<source>If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.</source>
<translation>Если комиссия установлена в 1000 сатоши, а транзакция составляет лишь 250 байт, тогда комиссия "на килобайт" составит 250 сатоши, а "как минимум" 1000 сатоши. Для транзакций крупнее килобайта в обоих случаях будет использоваться платёж "на килобайт".</translation>
</message>
<message>
<source>per kilobyte</source>
<translation>за килобайт</translation>
</message>
<message>
<source>If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.</source>
<translation>Если комиссия установлена в 1000 сатоши, а транзакция составляет лишь 250 байт, тогда комиссия "на килобайт" составит 250 сатоши, а "всего как минимум" 1000 сатоши. Для транзакций крупнее килобайта в обоих случаях будет использоваться платёж "на килобайт".</translation>
</message>
<message>
<source>total at least</source>
<translation>Итого</translation>
<translation>Итого как минимум</translation>
</message>
<message>
<source>Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.</source>
<translation>Уплата минимальной комиссии не проблема, пока объём транзакций меньше, чем свободное место в блоках. Учтите, однако, что такая транзакция может никогда не подтвердиться, если спрос на транзакции превышает возможности сети по их обработке.</translation>
</message>
<message>
<source>(read the tooltip)</source>
<translation>(прочтите подсказку)</translation>
</message>
<message>
<source>Recommended:</source>
@ -1864,6 +1888,10 @@ Address: %4
<source>Custom:</source>
<translation>Выборочно:</translation>
</message>
<message>
<source>(Smart fee not initialized yet. This usually takes a few blocks...)</source>
<translation>(Умная комиссия пока не инициализирована. Обычно для этого требуется несколько блоков...)</translation>
</message>
<message>
<source>Confirmation time:</source>
<translation>Время подтверждения:</translation>
@ -1994,7 +2022,7 @@ Address: %4
</message>
<message>
<source>Estimated to begin confirmation within %1 block(s).</source>
<translation>Ожидается начать подтверждение через %1 блок(ов).</translation>
<translation>Начало подтверждения ожидается через %1 блок(ов).</translation>
</message>
<message>
<source>Warning: Invalid Bitcoin address</source>
@ -2798,6 +2826,10 @@ rpcpassword=%s
<source>Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup</source>
<translation>Удалить все транзакции бумажника с возможностью восстановить эти части цепи блоков с помощью -rescan при запуске</translation>
</message>
<message>
<source>Distributed under the MIT software license, see the accompanying file COPYING or &lt;http://www.opensource.org/licenses/mit-license.php&gt;.</source>
<translation>Распространяется под лицензией MIT, см. приложенный файл COPYING или &lt;http://www.opensource.org/licenses/mit-license.php&gt;.</translation>
</message>
<message>
<source>Enter regression test mode, which uses a special chain in which blocks can be solved instantly.</source>
<translation>Войти в режим тестирования на регрессии, в котором используется специальная цепь, где блоки находятся мгновенно.</translation>
@ -3064,7 +3096,7 @@ rpcpassword=%s
</message>
<message>
<source>Set the number of threads for coin generation if enabled (-1 = all cores, default: %d)</source>
<translation>Задать число потоков генерации монет, если включена (-1 = число ядер процессора, по умолчанию: %d)</translation>
<translation>Задать число потоков генерации монет, если она включена (-1 = все ядра процессора, по умолчанию: %d)</translation>
</message>
<message>
<source>This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit &lt;https://www.openssl.org/&gt; and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard.</source>
@ -3332,7 +3364,7 @@ rpcpassword=%s
</message>
<message>
<source>Disable safemode, override a real safe mode event (default: %u)</source>
<translation>Отключить безопасный режим, отклонить реальное событие безопасного режима (по умолчанию: %u)</translation>
<translation>Отключить безопасный режим, перекрыть реальное событие безопасного режима (по умолчанию: %u)</translation>
</message>
<message>
<source>Error loading wallet.dat</source>

View file

@ -3,15 +3,31 @@
<name>AddressBookPage</name>
<message>
<source>Double-click to edit address or label</source>
<translation>Кликните два пута да промените адресу и/или етикету</translation>
<translation>Kliknite dva puta da izmenite adresu ili etiketu</translation>
</message>
<message>
<source>Create a new address</source>
<translation>Прави нову адресу</translation>
<translation>Napravite novu adresu</translation>
</message>
<message>
<source>&amp;New</source>
<translation>Novo</translation>
</message>
<message>
<source>Copy the currently selected address to the system clipboard</source>
<translation>Копира изабрану адресу на системски клипборд</translation>
<translation>Kopirajte trenutno izabranu adresu</translation>
</message>
<message>
<source>&amp;Copy</source>
<translation>Kopirajte</translation>
</message>
<message>
<source>&amp;Copy Address</source>
<translation>Kopirajte adresu</translation>
</message>
<message>
<source>Delete the currently selected address from the list</source>
<translation>Izbrisite trenutno izabranu adresu sa liste</translation>
</message>
<message>
<source>&amp;Delete</source>

View file

@ -524,6 +524,10 @@ Address: %4
</context>
<context>
<name>CoinControlDialog</name>
<message>
<source>Coin Selection</source>
<translation>Вибір Монет</translation>
</message>
<message>
<source>Quantity:</source>
<translation>Кількість:</translation>
@ -572,6 +576,14 @@ Address: %4
<source>Amount</source>
<translation>Кількість</translation>
</message>
<message>
<source>Received with label</source>
<translation>Отримано з позначкою</translation>
</message>
<message>
<source>Received with address</source>
<translation>Отримано з адресою</translation>
</message>
<message>
<source>Date</source>
<translation>Дата</translation>
@ -1034,6 +1046,14 @@ Address: %4
<source>Map port using &amp;UPnP</source>
<translation>Відображення порту через &amp;UPnP</translation>
</message>
<message>
<source>Connect to the Bitcoin network through a SOCKS5 proxy.</source>
<translation>Підключення до мережі Bitcoin через SOCKS5 проксі.</translation>
</message>
<message>
<source>&amp;Connect through SOCKS5 proxy (default proxy):</source>
<translation>&amp;Підключення через SOCKS5 проксі (проксі за замовчуванням):</translation>
</message>
<message>
<source>Proxy &amp;IP:</source>
<translation>&amp;IP проксі:</translation>
@ -1824,6 +1844,78 @@ Address: %4
<source>Custom change address</source>
<translation>Вказати адресу для решти</translation>
</message>
<message>
<source>Transaction Fee:</source>
<translation>Комісія за передачу:</translation>
</message>
<message>
<source>Choose...</source>
<translation>Виберіть...</translation>
</message>
<message>
<source>collapse fee-settings</source>
<translation>згорнути налаштування оплат</translation>
</message>
<message>
<source>Minimize</source>
<translation>Мінімізувати</translation>
</message>
<message>
<source>If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.</source>
<translation>Якщо оплата користувача встановлюється в 1000 Satoshi і розмір передачі всього 250 байт, то "за кілобайт" платить тільки 250 Satoshi, в той час як "щонайменше" платить 1000 satoshis. Для передач більших, ніж кілобайт обоє платять за кілобайт.</translation>
</message>
<message>
<source>per kilobyte</source>
<translation>за кілобайт</translation>
</message>
<message>
<source>If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.</source>
<translation>Якщо оплата користувача встановлюється в 1000 Satoshi і розмір передачі всього 250 байт, то "за кілобайт" платить тільки 250 Satoshi, в той час як "всього щонайменше" платить 1000 satoshis. Для передач більших, ніж кілобайт обоє платять за кілобайт.</translation>
</message>
<message>
<source>total at least</source>
<translation>всього щонайменше</translation>
</message>
<message>
<source>Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.</source>
<translation>Оплата тільки мінімальних зборів є прийнятною до тих пір, як обсяг транзакцій там є меншим аніж простору в блоках. Але майте на увазі, що це може анулювати транзакцію, якщо попит на Bitcoin транзакції стане значно більшим, ніж мережа зможе обробити.</translation>
</message>
<message>
<source>(read the tooltip)</source>
<translation>(читати підказки)</translation>
</message>
<message>
<source>Recommended:</source>
<translation>Рекомендовано:</translation>
</message>
<message>
<source>Custom:</source>
<translation>Змінено:</translation>
</message>
<message>
<source>(Smart fee not initialized yet. This usually takes a few blocks...)</source>
<translation>(Розумна оплата ще не ініціалізована. Це звичайно займає кілька блоків...)</translation>
</message>
<message>
<source>Confirmation time:</source>
<translation>Час підтвердження:</translation>
</message>
<message>
<source>normal</source>
<translation>звичайний</translation>
</message>
<message>
<source>fast</source>
<translation>швидкий</translation>
</message>
<message>
<source>Send as zero-fee transaction if possible</source>
<translation>Надіслати як нульовий плата за передачу, якщо це можливо</translation>
</message>
<message>
<source>(confirmation may take longer)</source>
<translation>(підтвердження може зайняти більше часу)</translation>
</message>
<message>
<source>Send to multiple recipients at once</source>
<translation>Відправити на декілька адрес</translation>
@ -1928,6 +2020,18 @@ Address: %4
<source>The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</source>
<translation>Транзакцію відхилено! Це може статись, якщо декілька монет з вашого гаманця вже використані, наприклад, якщо ви використовуєте одну копію гаманця (wallet.dat), а монети були використані з іншої копії, але не позначені як використані в цій.</translation>
</message>
<message>
<source>A fee higher than %1 is considered an insanely high fee.</source>
<translation>Плата вища, ніж %1 вважається шалено високою.</translation>
</message>
<message>
<source>Pay only the minimum fee of %1</source>
<translation>Платити тільки мінімальний збір у розмірі %1</translation>
</message>
<message>
<source>Estimated to begin confirmation within %1 block(s).</source>
<translation>Розрахунковий початок підтвердження протягом %1 блоку(ів).</translation>
</message>
<message>
<source>Warning: Invalid Bitcoin address</source>
<translation>Увага: Неправильна Bitcoin-адреса</translation>
@ -2734,6 +2838,10 @@ rpcpassword=%s
<source>Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup</source>
<translation>Видалити всі транзакції гаманця та відновити ті, що будуть знайдені під час запуску за допомогою -rescan</translation>
</message>
<message>
<source>Distributed under the MIT software license, see the accompanying file COPYING or &lt;http://www.opensource.org/licenses/mit-license.php&gt;.</source>
<translation>Поширюється за ліцензією MIT, додаткова інформація міститься у файлі COPYING та за адресою &lt;http://www.opensource.org/licenses/mit-license.php&gt;.</translation>
</message>
<message>
<source>Enter regression test mode, which uses a special chain in which blocks can be solved instantly.</source>
<translation>Ввійти в режим регресивного тестування, що використовує спеціальний ланцюг з миттєвим знаходженням блоків.</translation>
@ -2986,6 +3094,10 @@ rpcpassword=%s
<source>Fees (in BTC/Kb) smaller than this are considered zero fee for transaction creation (default: %s)</source>
<translation>Комісії (в BTC/КБ), що менші за вказану, вважатимуться нульовими (для створення транзакції) (типово: %s)</translation>
</message>
<message>
<source>Maximum size of data in data carrier transactions we relay and mine (default: %u)</source>
<translation>Максимальний розмір даних в транзакціях носіїв даних, що ми передаємо і добуваємо (за замовчуванням: %u)</translation>
</message>
<message>
<source>Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)</source>
<translation>Дізнаватися адреси учасників через DNS при замалій кількості відомих адрес (типово: 1 за відсутності -connect)</translation>
@ -2994,6 +3106,10 @@ rpcpassword=%s
<source>Set maximum size of high-priority/low-fee transactions in bytes (default: %d)</source>
<translation>Встановити максимальний розмір транзакцій з високим пріоритетом та низькою комісією (в байтах) (типово: %d)</translation>
</message>
<message>
<source>Set the number of threads for coin generation if enabled (-1 = all cores, default: %d)</source>
<translation>Встановити кількість потоків для генерації монет (-1 = кількості ядер, типово: %d)</translation>
</message>
<message>
<source>This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit &lt;https://www.openssl.org/&gt; and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard.</source>
<translation>Цей продукт включає в себе програмне забезпечення, розроблене в рамках проекту OpenSSL &lt;https://www.openssl.org/&gt;, криптографічне програмне забезпечення, написане Еріком Янгом, та функції для роботи з UPnP, написані Томасом Бернардом.</translation>
@ -3098,6 +3214,10 @@ rpcpassword=%s
<source>Send trace/debug info to console instead of debug.log file</source>
<translation>Відсилати налагоджувальну інформацію на консоль, а не у файл debug.log</translation>
</message>
<message>
<source>Send transactions as zero-fee transactions if possible (default: %u)</source>
<translation>Встановити операцію надсилання, як неоплатну операцію, якщо це можливо (за замовчуванням: %u)</translation>
</message>
<message>
<source>Show all debugging options (usage: --help -help-debug)</source>
<translation>Показати всі налагоджувальні параметри (використання: --help -help-debug)</translation>

View file

@ -478,6 +478,10 @@
<source>Up to date</source>
<translation></translation>
</message>
<message numerus="yes">
<source>Processed %n blocks of transaction history.</source>
<translation><numerusform> %n </numerusform></translation>
</message>
<message>
<source>Catching up...</source>
<translation>...</translation>
@ -520,6 +524,10 @@ Address: %4
</context>
<context>
<name>CoinControlDialog</name>
<message>
<source>Coin Selection</source>
<translation></translation>
</message>
<message>
<source>Quantity:</source>
<translation>:</translation>
@ -1030,6 +1038,14 @@ Address: %4
<source>Map port using &amp;UPnP</source>
<translation> &amp;UPnP </translation>
</message>
<message>
<source>Connect to the Bitcoin network through a SOCKS5 proxy.</source>
<translation> SOCKS5 </translation>
</message>
<message>
<source>&amp;Connect through SOCKS5 proxy (default proxy):</source>
<translation> SOCKS5 ():</translation>
</message>
<message>
<source>Proxy &amp;IP:</source>
<translation>:</translation>
@ -1820,6 +1836,38 @@ Address: %4
<source>Custom change address</source>
<translation></translation>
</message>
<message>
<source>Transaction Fee:</source>
<translation>:</translation>
</message>
<message>
<source>Choose...</source>
<translation>...</translation>
</message>
<message>
<source>collapse fee-settings</source>
<translation></translation>
</message>
<message>
<source>Minimize</source>
<translation></translation>
</message>
<message>
<source>per kilobyte</source>
<translation></translation>
</message>
<message>
<source>(read the tooltip)</source>
<translation>()</translation>
</message>
<message>
<source>Confirmation time:</source>
<translation>:</translation>
</message>
<message>
<source>Send as zero-fee transaction if possible</source>
<translation></translation>
</message>
<message>
<source>Send to multiple recipients at once</source>
<translation></translation>
@ -2731,6 +2779,10 @@ alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</translation>
<source>Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup</source>
<translation>使 -rescan </translation>
</message>
<message>
<source>Distributed under the MIT software license, see the accompanying file COPYING or &lt;http://www.opensource.org/licenses/mit-license.php&gt;.</source>
<translation> MIT COPYING : &lt;http://www.opensource.org/licenses/mit-license.php&gt;.</translation>
</message>
<message>
<source>Enter regression test mode, which uses a special chain in which blocks can be solved instantly.</source>
<translation>使</translation>
@ -2783,6 +2835,10 @@ alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</translation>
<source>Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.</source>
<translation>警告: 錢包檔 wallet.dat wallet.dat %s, wallet.{timestamp}.bak. </translation>
</message>
<message>
<source>Whitelist peers connecting from the given netmask or IP address. Can be specified multiple times.</source>
<translation></translation>
</message>
<message>
<source>(default: 1)</source>
<translation>(預設值: 1)</translation>
@ -2821,7 +2877,7 @@ alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</translation>
</message>
<message>
<source>Do not load the wallet and disable wallet RPC calls</source>
<translation> RPC </translation>
<translation> RPC </translation>
</message>
<message>
<source>Do you want to rebuild the block database now?</source>
@ -2947,6 +3003,10 @@ alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</translation>
<source>Cannot obtain a lock on data directory %s. Bitcoin Core is probably already running.</source>
<translation> %s</translation>
</message>
<message>
<source>Continuously rate-limit free transactions to &lt;n&gt;*1000 bytes per minute (default:%u)</source>
<translation> &lt;n&gt;*1000 (: %u)</translation>
</message>
<message>
<source>Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)</source>
<translation>使(umask) 077 ()</translation>
@ -2971,6 +3031,10 @@ alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</translation>
<source>Fees (in BTC/Kb) smaller than this are considered zero fee for transaction creation (default: %s)</source>
<translation>(Kb) (: %s)</translation>
</message>
<message>
<source>Maximum size of data in data carrier transactions we relay and mine (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)</source>
<translation>使 (預設值: 當沒用 -connect 1)</translation>
@ -2979,6 +3043,10 @@ alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</translation>
<source>Set maximum size of high-priority/low-fee transactions in bytes (default: %d)</source>
<translation>(: %d)</translation>
</message>
<message>
<source>Set the number of threads for coin generation if enabled (-1 = all cores, default: %d)</source>
<translation>(-1 : %d)</translation>
</message>
<message>
<source>This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit &lt;https://www.openssl.org/&gt; and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard.</source>
<translation> OpenSSL Project OpenSSL Toolkit &lt;https://www.openssl.org/&gt;, 和由 Eric Young 撰寫的加解密軟體,以及由 Thomas Bernard 所撰寫的 UPnP 軟體。</translation>
@ -3083,6 +3151,10 @@ alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</translation>
<source>Send trace/debug info to console instead of debug.log file</source>
<translation> debug.log </translation>
</message>
<message>
<source>Send transactions as zero-fee transactions if possible (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Show all debugging options (usage: --help -help-debug)</source>
<translation> (: --help --help-debug)</translation>
@ -3191,14 +3263,178 @@ alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com</translation>
<source>Error loading wallet.dat: Wallet corrupted</source>
<translation> wallet.dat 時發生錯誤: 錢包損毀了</translation>
</message>
<message>
<source>(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)</source>
<translation>(1 使2 )</translation>
</message>
<message>
<source>Flush database activity from memory pool to disk log every &lt;n&gt; megabytes (default: %u)</source>
<translation> &lt;n&gt; (MB)(: %u)</translation>
</message>
<message>
<source>How thorough the block verification of -checkblocks is (0-4, default: %u)</source>
<translation>使 -checkblocks (0 4: %u)</translation>
</message>
<message>
<source>If paytxfee is not set, include enough fee so transactions are confirmed on average within n blocks (default: %u)</source>
<translation> paytxfee n (: %u)</translation>
</message>
<message>
<source>Log transaction priority and fee per kB when mining blocks (default: %u)</source>
<translation>(kB)(: %u)</translation>
</message>
<message>
<source>Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)</source>
<translation> getrawtransaction RPC (: %u)</translation>
</message>
<message>
<source>Number of seconds to keep misbehaving peers from reconnecting (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Output debugging information (default: %u, supplying &lt;category&gt; is optional)</source>
<translation>(: %u, &lt;category&gt;)</translation>
</message>
<message>
<source>Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)</source>
<translation>使 SOCK5 Tor (: %s)</translation>
</message>
<message>
<source>(default: %s)</source>
<translation>(: %s)</translation>
</message>
<message>
<source>Acceptable ciphers (default: %s)</source>
<translation>(: %s)</translation>
</message>
<message>
<source>Always query for peer addresses via DNS lookup (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Disable safemode, override a real safe mode event (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Error loading wallet.dat</source>
<translation> wallet.dat </translation>
</message>
<message>
<source>Force safe mode (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Generate coins (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>How many blocks to check at startup (default: %u, 0 = all)</source>
<translation>(: %u, 0 )</translation>
</message>
<message>
<source>Include IP addresses in debug output (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Invalid -proxy address: '%s'</source>
<translation> -proxy : '%s'</translation>
</message>
<message>
<source>Limit size of signature cache to &lt;n&gt; entries (default: %u)</source>
<translation> &lt;n&gt; (: %u)</translation>
</message>
<message>
<source>Listen for JSON-RPC connections on &lt;port&gt; (default: %u or testnet: %u)</source>
<translation> &lt;port&gt; JSON-RPC (: %u, : %u)</translation>
</message>
<message>
<source>Listen for connections on &lt;port&gt; (default: %u or testnet: %u)</source>
<translation> &lt;port&gt; (: %u, : %u)</translation>
</message>
<message>
<source>Maintain at most &lt;n&gt; connections to peers (default: %u)</source>
<translation> &lt;n&gt; (: %u)</translation>
</message>
<message>
<source>Maximum per-connection receive buffer, &lt;n&gt;*1000 bytes (default: %u)</source>
<translation> &lt;n&gt;*1000 (: %u)</translation>
</message>
<message>
<source>Maximum per-connection send buffer, &lt;n&gt;*1000 bytes (default: %u)</source>
<translation> &lt;n&gt;*1000 (: %u)</translation>
</message>
<message>
<source>Only accept block chain matching built-in checkpoints (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Prepend debug output with timestamp (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Print block tree on startup (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Relay and mine data carrier transactions (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Relay non-P2SH multisig (default: %u)</source>
<translation> P2SH (: %u)</translation>
</message>
<message>
<source>Run a thread to flush wallet periodically (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Server certificate file (default: %s)</source>
<translation>(: %s)</translation>
</message>
<message>
<source>Server private key (default: %s)</source>
<translation>(: %s)</translation>
</message>
<message>
<source>Set key pool size to &lt;n&gt; (default: %u)</source>
<translation> &lt;n&gt; (: %u)</translation>
</message>
<message>
<source>Set minimum block size in bytes (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Set the number of threads to service RPC calls (default: %d)</source>
<translation> RPC (: %d)</translation>
</message>
<message>
<source>Sets the DB_PRIVATE flag in the wallet db environment (default: %u)</source>
<translation> DB_PRIVATE (: %u)</translation>
</message>
<message>
<source>Specify configuration file (default: %s)</source>
<translation>(: %s)</translation>
</message>
<message>
<source>Specify connection timeout in milliseconds (minimum: 1, default: %d)</source>
<translation> (最少值: 1, : %d)</translation>
</message>
<message>
<source>Specify pid file (default: %s)</source>
<translation>(: %s)</translation>
</message>
<message>
<source>Spend unconfirmed change when sending transactions (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Stop running after importing blocks from disk (default: %u)</source>
<translation>(: %u)</translation>
</message>
<message>
<source>Threshold for disconnecting misbehaving peers (default: %u)</source>
<translation> (: %u)</translation>
</message>
<message>
<source>Unknown network specified in -onlynet: '%s'</source>
<translation> -onlynet : '%s'</translation>