8674e74 Provide relevant error message if datadir is not writable. (murrayn)
Pull request description:
If the --datadir exists, but is not writable, the current error message on startup is 'Cannot obtain a lock on data directory foo. Bitcoin Core is probably already running.' This is misleading.
I believe this PR addresses #11668, although the issue is not Windows-specific.
Tree-SHA512: 10cbbaea433072aee4fb3e8938a72073c7a5c841f7a7685c9e12549c322b2925c7d34bac254ac33021b23132bfc352c058712bc9542298cf86f8fd9757f528b2
5fbf7c4 fix nits: variable naming, typos (Martin Ankerl)
1e0ee90 Use best-fit strategy in Arena, now O(log(n)) instead O(n) (Martin Ankerl)
Pull request description:
This replaces the first-fit algorithm used in the Arena with a best-fit. According to "Dynamic Storage Allocation: A Survey and Critical Review", Wilson et. al. 1995, http://www.scs.stanford.edu/14wi-cs140/sched/readings/wilson.pdf, both startegies work well in practice.
The advantage of using best-fit is that we can switch the O(n) allocation to O(log(n)). Additionally, some previously O(log(n)) operations are now O(1) operations by using hash maps. The end effect is that the benchmark runs about 2.5 times faster on my machine:
# Benchmark, evals, iterations, total, min, max, median
old: BenchLockedPool, 5, 530, 5.25749, 0.00196938, 0.00199755, 0.00198172
new: BenchLockedPool, 5, 1300, 5.11313, 0.000781493, 0.000793314, 0.00078606
I've run all unit tests and benchmarks, and increased the number of iterations so that BenchLockedPool takes about 5 seconds again.
Tree-SHA512: 6551e384671f93f10c60df530a29a1954bd265cc305411f665a8756525e5afe2873a8032c797d00b6e8c07e16d9827465d0b662875433147381474a44119ccce
57dae3fc4a Replace boost::call_once with std::call_once (donaloconnor)
Pull request description:
This replaces boost::call_once with the C++11 std::call_once. The aim is to remove unnecessary boost code.
Tested on Windows/MSVC
Tree-SHA512: 5e98ea6e5052fffeaf29f845f4ecf1078b38cbb27671c5b7b6167e7f074a391e10020445107979d9e220d029bc9464fb8b2ccb0bea664eeb7af59a789c988b10
Support is added to serialize arrays of type char or unsigned char directly,
without any wrappers. All invocations of the FLATDATA wrappers that are
obsoleted by this are removed.
This includes a patch by Russell Yanofsky to make char casting type safe.
The serialization of CSubNet is changed to serialize a bool directly rather
than though FLATDATA. This makes the serialization independent of the size
of the bool type (and will use 1 byte everywhere).
b7fbcc5 Qt: Warn users about invalid-BIP21 URI bitcoin:// (Alexey Ivanov)
Pull request description:
This change affects only Qt5 users, since Qt4 QUrl don't forces lower case for urls. Also bitcoin-qt builds against Qt4 on linux.
PR for #11645
Tree-SHA512: 6b8cb18b29dbd2754e190a662ed67274a7f0decc6adb00b7e1af107d5f8ea2845b668cf28d6ccf2f1d15e8ef212f5a76910810634a4c15e7fabd1dd2072e7232
4d9b4256d8 Fix typos (Dimitris Apostolou)
Pull request description:
Unfortunately I messed up my repo while trying to squash #12593 so I created a PR with just the correct fixes.
Tree-SHA512: 295d77b51bd2a9381f1802c263de7ffb2edd670d9647391e32f9a414705b3c8b483bb0e469a9b85ab6a70919ea13397fa8dfda2aea7a398b64b187f178fe6a06
This adds a READWRITEAS(type, obj) macro which serializes obj as if it
were casted to (const type&) when const, and to (type&) when non-const.
This makes it usable in serialization code that uses a single
implementation for both serialization and deserializing, which doesn't
know the constness of the object involved.
8b2ef27 tests: Test connecting with non-existing RPC cookie file (practicalswift)
a2b2476 tests: Test connecting to a non-existing server (practicalswift)
de04fde bitcoin-cli: Provide a better error message when bitcoind is not running (practicalswift)
Pull request description:
Provide a better `bitcoin-cli` error message when `bitcoind` is not running.
Before this patch:
```
$ killall -9 bitcoind
$ bitcoin-cli -testnet echo 'hello world'
error: Could not locate RPC credentials. No authentication cookie could be found, and RPC password is not set. See -rpcpassword and -stdinrpcpass. Configuration file: (/root/.bitcoin/bitcoin.conf)
```
After this patch:
```
$ killall -9 bitcoind
$ bitcoin-cli -testnet echo 'hello world'
error: Could not connect to the server 127.0.0.1:18332
Make sure the bitcoind server is running and that you are connecting to the correct RPC port.
```
Tree-SHA512: bb16e1a9a1ac110ee202c3cb99b5d7c5c1e5487a17e6cd101e12dc69e9525c14dc71f37b128c26ad615369a57547f15d0f1e29b207c1b2f2ee4b4ba7105f3433
d843db7 Qt: remove "new" button during receive-mode in addressbook (Jonas Schnelli)
Pull request description:
There are currently two ways how to generate new receiving addresses in the GUI (which leads to code duplication or required refactoring, see #12520).
Since the address-book is probably something that should be removed in the long run, suppressing the new-button in receive-mode could be a first step in deprecating the address book.
With this PR, users can still edit existing receiving address book entries and they can still create new sending address book entries.
Tree-SHA512: abe8d1b44bc3e1b53826ccf9d2b3f764264337758d95ca1fe1ef1bac72d47608cf454055fce3720e06634f0a5841a752ce643b4505b47d6e322b6fc71296e961
e5468a19d1 Remove unreachable help conditions (lutangar)
Pull request description:
These conditions on `request.fHelp`, which appears in the body of the following functions are never reached:
* `walletpassphrase`
* `walletpassphrasechange`
* `encryptwallet`
```
...
if (request.fHelp || request.params.size() != 0) {
throw std::runtime_error("");
}
...
if (request.fHelp)
return true;
...
```
The first condition would throw if `request.fHelp` evaluates to `true`.
Tree-SHA512: 1aa41ed233c6bebae27151ab5cc67144d2a408335a3acef3c103e144d6343685f360b1146e14bc8dc1d53d00fcfc6ff1ab6a0eeb0805191172a23b306ab50b79
499d95e27 Add static_assert to prevent VARINT(<signed value>) (Russell Yanofsky)
Pull request description:
Using VARINT with signed types is dangerous because negative values will appear to serialize correctly, but then deserialize as positive values mod 128.
This commit changes the VARINT macro to trigger a compile error by default if called with an signed value, and it updates existing broken uses of VARINT to pass a special flag that lets them keep working with no changes in behavior.
There is some discussion about this issue here: https://github.com/bitcoin/bitcoin/pull/9693#issuecomment-278701473. I think another good change along these lines would be to make `GetSizeOfVarInt` and `WriteVarInt` throw exceptions if they are passed numbers less than 0 to serialize. But unlike this change, that would be a change in runtime behavior, and need more consideration.
Tree-SHA512: 082c65598cfac6dc1da042bdb47dbc9d5d789fc849fe52921cc238578588f4e5ff976c8b4b2ce42cb75290eb14f3b42ea76e26202c223c5b2aa63ef45c2ea3cc
fab8a6f60 wallet: Change output type globals to members (MarcoFalke)
Pull request description:
Output type is used by the wallet when generating addresses or transactions with change, thus it should be a member of `CWallet`.
Moreover, in light of multiwallet, it makes sense to prepare for per-wallet attributes instead of for-all-wallets globals.
Tree-SHA512: 4fa397cd82522e5bacf4870160a2a0f5e1f2dc046e4b9e2514dee18b187a0e1724d036315f77fa48e48f85533021d5e5525d798160a92d389d75512f3f9e1405
This change only updates strings and adds RPC aliases, but should simplify the
implementation of address labels in
https://github.com/bitcoin/bitcoin/pull/7729, by getting renaming out of the
way and letting it focus on semantics.
The difference between accounts and labels is that labels apply only to
addresses, while accounts apply to both addresses and transactions
(transactions have "from" and "to" accounts). The code associating accounts
with transactions is clumsy and unreliable so we would like get rid of it.
8ae413235 Remove redundant checks for MSG_* from configure.ac (Vasil Dimov)
71129e026 Do not check for main() in libminiupnpc (Vasil Dimov)
8c632f73c ax_boost_{chrono,unit_test_framework}.m4: take changes from upstream (Vasil Dimov)
Pull request description:
Tree-SHA512: a99ef98c0b94f892eadeda24b3d55c25bedf225b98c6e4178cf6c2d886b44d43e9f75414d0b37db9ac261cec2350666e5e64fab9c104249dd34ff485c51663cb
7ef46d063a Remove redundant includes. Conform to header include guidelines. (practicalswift)
Pull request description:
From the header include guidelines ([developer-notes.md](https://github.com/bitcoin/bitcoin/blob/master/doc/developer-notes.md#source-code-organization)):
> "One exception is that a `.cpp` file does not need to re-include the includes already included in its corresponding `.h` file."
Covered in this PR:
* `rpc/util.h` includes `pubkey.h` + `utilstrencodings.h`. `rpc/util.cpp` includes `rpc/util.h`.
* `util.h` includes `fs.h`. `util.cpp` includes `util.h`.
Tree-SHA512: a38d9ecefd8165ad151c1ffde52cfbac968526c49db2080988bf6e6a3daa2ebeceb34d08f817e275edf7c650bf3155de01369bfb352522f8e0ae136b2289b194
172f5fa738 Support deserializing into temporaries (Pieter Wuille)
2761bca997 Merge READWRITEMANY into READWRITE (Pieter Wuille)
Pull request description:
This is another fragment of improvements from #10785.
The current serialization code does not support serializing/deserializing from/to temporaries (like `s >> CFlatData(script)`). As a result, there are many invocations of the `REF` macro which in addition to changing the reference type also changes the constness. This is unnecessary in C++11 as we can use rvalue references now instead.
The first commit is an extra simplification we can make that removes the duplication of code between `READWRITE` and `READWRITEMANY` (and related functions).
Tree-SHA512: babfa9cb268cc3bc39917e4f0a90e4651c33d85032161e16547a07f3b257b7ca7940e0cbfd69f09439d26fafbb1a6cf6359101043407e2c7aeececf7f20b6eed
Using VARINT with signed types is dangerous because negative values will appear
to serialize correctly, but then deserialize as positive values mod 128.
This commit changes the VARINT macro to trigger an error by default if called
with an signed value, and updates broken uses of VARINT to pass a special flag
that lets them keep working with no change in behavior.
1ee72a819f qt: Avoid querying unnecessary model data when filtering transactions (João Barbosa)
Pull request description:
This change moves down model data querying to where it's needed. The worst case remains the same (all data is queried and the row passes) but for the average case it improves the filter performance.
Tree-SHA512: 3bcaced029cb39dfbc5377246ce76634f9050ee3a3053db4d358fcbf4d8107c649e75841f21d69f1aebcaf1bbffe3eac784e6b03b366fdbbfec1e0da8f78d8ef
bb079a0e2c Remove unused variable in SortForBlock (Drew Rasmussen)
Pull request description:
Although txiter is passed to BlockAssembler::SortForBlock, it is never used. Other than BlockAssembler::addPackageTxs, no other method ever makes a call to SortForBlock, thus making this change harmless.
Tree-SHA512: c7df948c5f75f7371844200e0227a26476437f300148d29020e01041b382f5bda31d9c520c9c5425aee88ce8f4a52cd0e594985d69ed8a081b878cda2e4de8c5
It is redundant to check for the presence of MSG_NOSIGNAL macro in
configure.ac, define HAVE_MSG_NOSIGNAL and then check whether the later
is defined in the source code. Instead we can check directly whether
MSG_NOSIGNAL is defined. Same for MSG_DONTWAIT.
In addition to that, the checks we had in configure.ac produce a
compiler warning about unused variable and thus could fail if
-Werror is present and erroneously proclaim that the macros are
not available.
f98b54352 Only call NotifyBlockTip when the active chain changes (James O'Beirne)
152b7fb25 [tests] Add a (failing) test for waitforblockheight (James O'Beirne)
Pull request description:
This is a subset of the more controversial https://github.com/bitcoin/bitcoin/pull/12407, but this also adds a test demonstrating the bug.
In InvalidateBlock, we're calling NotifyBlockTip with the now-invalid block's prev regardless of what chain the ancestor block is on. This could create numerous issues, but it at least screws up `waitforblockheight` (or anything else relying on `rpc/blockchain.cpp:latestblock`) when InvalidateBlock is called on a block not in chainActive, which can happen via RPC.
Only call NotifyBlockTip when the block being marked invalid is on the active chain.
Tree-SHA512: 9a54fe5e8c7eb489daf5df4483c0986129e871e2ca931a456ba869ecb5d5a8d4f7bd27ccc9e711e9292c9ed79ddef896c85d0e81fc76883503e327995b0e914f
We don't want to use BnB when there are preset inputs because there
is some weirdness with making that work with using the KnapsackSolver
as the fallback. Currently we say that we haven't used bnb when
there are preset inputs, but we don't actually disable BnB. This fixes
that.
73b5bf2cb Add a test to make sure that negative effective values are filtered (Andrew Chow)
76d2f068a Benchmark BnB in the worst case where it exhausts (Andrew Chow)
6a34ff533 Have SelectCoinsMinConf and SelectCoins use BnB or Knapsack and use it (Andrew Chow)
fab04887c Add a GetMinimumFeeRate function which is wrapped by GetMinimumFee (Andrew Chow)
cd927ff32 Move original knapsack solver tests to coinselector_tests.cpp (Andrew Chow)
fb716f7b2 Move current coin selection algorithm to coinselection.{cpp,h} (Andrew Chow)
4566ab75f Add tests for the Branch and Bound algorithm (Andrew Chow)
4b2716da4 Remove coinselection.h -> wallet.h circular dependency (Andrew Chow)
7d77eb1a5 Use a struct for output eligibility (Andrew Chow)
ce7435cf1 Move output eligibility to a separate function (Andrew Chow)
0185939be Implement Branch and Bound coin selection in a new file (Andrew Chow)
f84fed8eb Store effective value, fee, and long term fee in CInputCoin (Andrew Chow)
12ec29d3b Calculate and store the number of bytes required to spend an input (Andrew Chow)
Pull request description:
This is an implementation of the [Branch and Bound coin selection algorithm written by Murch](http://murch.one/wp-content/uploads/2016/11/erhardt2016coinselection.pdf) (@xekyo). I have it set so this algorithm will run first and if it fails, it will fall back to the current coin selection algorithm. The coin selection algorithms and tests have been refactored to separate files instead of having them all in wallet.cpp.
I have added some tests for the new algorithm and a test for all of coin selection in general. However, more tests may be needed, but I will need help with coming up with more test cases.
This PR uses some code borrowed from #10360 to use effective values when selecting coins.
Tree-SHA512: b0500f406bf671e74984fae78e2d0fbc5e321ddf4f06182c5855e9d1984c4ef2764c7586d03e16fa4b578c340b21710324926f9ca472d5447a0d1ed43eb4357e
* Make PeerLogicValidation final to prevent deriving from it [1]
* Prevent deletions of NetEventsInterface and CValidationInterface
objects via a base class pointer
[1] silences the following compiler warning (from Clang 7.0.0):
/usr/include/c++/v1/memory:2285:5: error: delete called on non-final 'PeerLogicValidation' that has
virtual functions but non-virtual destructor [-Werror,-Wdelete-non-virtual-dtor]
delete __ptr;
^
/usr/include/c++/v1/memory:2598:7: note: in instantiation of member function
'std::__1::default_delete<PeerLogicValidation>::operator()' requested here
__ptr_.second()(__tmp);
^
init.cpp:201:15: note: in instantiation of member function 'std::__1::unique_ptr<PeerLogicValidation,
std::__1::default_delete<PeerLogicValidation> >::reset' requested here
peerLogic.reset();
^
b4bc32a451 [wallet] Get rid of CWalletTx default constructor (Russell Yanofsky)
a128bdc9e1 [wallet] Construct CWalletTx objects in CommitTransaction (Russell Yanofsky)
Pull request description:
Two commits:
- `Construct CWalletTx objects in CommitTransaction` moves a bunch of CWalletTx initialization into CWallet::CommitTransaction to dedup some code and avoid future inconsistencies in how wallet transactions are created.
- `Get rid of CWalletTx default constructor` does what is described and eliminates the possibility of empty transaction entries being inadvertently created by mapWallet[hash] accesses.
Both of these changes were originally part of #9381
Tree-SHA512: af3841c4f0539e0662d81b33c5369fc70aa06ddde1c59cb00fb21c9e4c7d9ff47f1edc5040cb463af1333838802c56b3ef875b939e2b804ee45b8e0294a4371c
Currently, the READWRITE macro cannot be passed any non-const temporaries, as
the SerReadWrite function only accepts lvalue references.
Deserializing into a temporary is very common, however. See for example
things like 's >> VARINT(n)'. The VARINT macro produces a temporary wrapper
that holds a reference to n.
Fix this by accepting non-const rvalue references instead of lvalue references.
We don't propagate the rvalue-ness down, as there are no useful optimizations
that only apply to temporaries.
Then use this new functionality to get rid of many (but not all) uses of the
'REF' macro (which casts away constness).
92fabcd44 Add LookupBlockIndex function (João Barbosa)
43a32b739 Add missing cs_lock in CreateWalletFromFile (João Barbosa)
f814a3e8f Fix cs_main lock in LoadExternalBlockFile (João Barbosa)
c651df8b3 Lock cs_main while loading block index in AppInitMain (João Barbosa)
02de6a6bc Assert cs_main is held when accessing mapBlockIndex (João Barbosa)
Pull request description:
Replace all `mapBlockIndex` lookups with the new `LookupBlockIndex()`. In some cases it avoids a second lookup.
Tree-SHA512: ca31118f028a19721f2191d86f2dd398144d04df345694575a64aeb293be2f85785201480c3c578a0ec99690516205708558c0fd4168b09313378fd4e60a8412
42343c748 Split up and sanitize CAccountingEntry serialization (Pieter Wuille)
029ecac1b Split up and sanitize CWalletTx serialization (Pieter Wuille)
Pull request description:
This is a small subset of changes taken from #10785, fixing a few of the craziest constness violations in the serialization code.
`CWalletTx` currently serializes some of its fields by embedding them in a key-value `mapValue`, which is modified (and then fixed up) even from the `Serialize` method (for which `mapValue` is const). `CAccountingEntry` goes even further in that it stores such a map by appending it into `strComment` after a null char, which is again later fixed up again.
Fix this by splitting the serialization and deserialization code, and making the serialization act on a copy of `mapValue` / `strComment`.
Tree-SHA512: 487e04996dea6aba5b9b8bdaf2c4e680808f111a15afc557b8d078e14b01e4f40f8ef27588869be62f9a87052117c17e0a0c26c59150f83472a9076936af035e
fac70134a rpc: Update createrawtransaction examples (MarcoFalke)
fa06dfce0 [rpc] createrawtransaction: Accept sorted outputs (MarcoFalke)
8acd25d85 rpc: Allow typeAny in RPCTypeCheck (MarcoFalke)
Pull request description:
The second parameter of the `createrawtransaction` is a dictionary of the outputs. This comes with at least two drawbacks:
* In case of duplicate keys, either of them might silently disappear, with no user feedback at all. A user needs to make other mistakes, but this could eventually lead to abnormal tx fees.
* A dictionary does not guarantee that keys are sorted. Again, a user needs to keep this in mind, as it could eventually lead to excessive tx fees.
Even though my scenario of loss-of-funds is unlikely to happen, I see it as a inconvenience that should be fixed.
Tree-SHA512: cd562f34f7f9f79c7d3433805971325c388c2035611be283980f4049066a622df4f0afdc11d7ac96662260ec0115147cb65e1ab5268f5a1b063242f3fe425f77
Allows SelectCoinsMinConf and SelectCoins be able to switch between
using BnB or Knapsack for choosing coins.
Has SelectCoinsMinConf do the preprocessing necessary to support either
BnB or Knapsack. This includes calculating the filtering the effective
values for each input.
Uses BnB in CreateTransaction to find an exact match for the output.
If BnB fails, it will fallback to the Knapsack solver.
Moves the current coin selection algorithm out of SelectCoinsMinConf
and puts it in coinselection.{cpp,h}. The new function, KnapsackSolver,
instead of taking a vector of COutputs, will take a vector of CInputCoins
that is prepared by SelectCoinsMinConf.
Changes CInputCoin to coinselection and to use CTransactionRef in
order to avoid a circular dependency. Also moves other coin selection
specific variables out of wallet.h to coinselectoin.h
f4b68b3f8f Log fatal LevelDB errors more verbosely (Evan Klitzke)
Pull request description:
The `leveldb::Status` class logs the filename of corrupted files, which might be useful when looking at error reports from usres. In theory this is already logged via the `LogPrintf()` statement in `HandleError()`, but that may not always be close to where the final error message is logged, e.g. see https://github.com/bitcoin/bitcoin/issues/11355#issuecomment-340340542 where the log trace provided by the user does not contain that information (and other user comments in the same issue).
This also adds a log message instructing the user to run the process with `-debug=leveldb`, which provides much more verbose error messages about LevelDB internals. This may not really help much, but improving the error messages here can't hurt.
Tree-SHA512: bbdc52f0ae50e77e4d74060f9f77c6a0b10d5fad1da371eec1ad38a499af5fde3a3b34dd915e721f6bbe779a1f9693ab04fd9cdbcfa95c28f2979b4c0df181c9
* Z is the zone designator for the zero UTC offset.
* T is the delimiter used to separate date and time.
This makes it clear for the end-user that the date/time logged is
specified in UTC and not in the local time zone.
Before this patch:
```
$ bitcoin-cli -testnet echo 'hello world'
error: Could not locate RPC credentials. No authentication cookie could be found, and RPC password is not set. See -rpcpassword and -stdinrpcpass. Configuration file: (/root/.bitcoin/bitcoin.conf)
```
After this patch:
```
$ bitcoin-cli -testnet echo 'hello world'
error: Could not connect to the server 127.0.0.1:18332
Make sure the bitcoind server is running and that you are connecting to the correct RPC port.
```
No change in behavior in the normal case. But buggy mapWallet lookups with
invalid txids will now throw exceptions instead of inserting dummy entries into
the map, and potentially causing segfaults and other failures.
This also makes it a compiler error to use the mapWallet[hash] syntax which
could create dummy entries.
Construct CWalletTx objects in CWallet::CommitTransaction, instead of having
callers do it. This ensures CWalletTx objects are constructed in a uniform way
and all fields are set.
This also makes it possible to avoid confusing and wasteful CWalletTx copies in
https://github.com/bitcoin/bitcoin/pull/9381
There is no change in behavior.
46e7f800b Limit the number of IPs we use from each DNS seeder (e0)
Pull request description:
A risk exists where a malicious DNS seeder eclipses a node by returning an enormous number of IP addresses. In this commit we mitigate this risk by limiting the number of IP addresses addrman learns to 256 per DNS seeder.
As discussed with @theuni
Tree-SHA512: 949e870765b1470200f2c650341d9e3308a973a7d1a6e557b944b0a2b8ccda49226fc8c4ff7d2a05e5854c4014ec0b67e37a3f2287556fe7dfa2048ede1f2e6f
0749808a7 CheckMinimalPush comments are prescriptive (Gregory Sanders)
176db6147 simplify CheckMinimalPush checks, add safety assert (Gregory Sanders)
Pull request description:
the two conditions could simply never be hit as `true`, as those opcodes have a push payload of size 0 in `data`.
Added the assert for clarity for future readers(matching the gating in the interpreter) and safety for future use.
This effects policy only.
Tree-SHA512: f49028a1d5e907ef697b9bf5104c81ba8f6a331dbe5d60d8d8515ac17d2d6bfdc9dcc856a7e3dbd54814871b7d0695584d28da6553e2d9d7715430223f0b3690
be8ab7d08 Create new wallet databases as directories rather than files (Russell Yanofsky)
26c06f24e Allow wallet files not in -walletdir directory (Russell Yanofsky)
d8a99f65e Allow wallet files in multiple directories (Russell Yanofsky)
Pull request description:
This change consists of three commits:
* The first commit is a pure refactoring that removes the restriction that two wallets can only be opened at the same time if they are contained in the same directory.
* The second commit removes the restriction that `-wallet` filenames can only refer to files in the `-walletdir` directory.
* The third commit makes second commit a little safer by changing bitcoin to create wallet databases as directories rather than files, so they can be safely backed up.
All three commits should be straightforward:
* The first commit adds around 20 lines of new code and then updates a bunch of function signatures (generally updating them to take plain fs::path parameters, instead of combinations of strings, fs::paths, and objects like CDBEnv and CWalletDBWrapper).
* The second commit removes two `-wallet` filename checks and adds some test cases to the multiwallet unit test.
* The third commit just changes the mapping from specified wallet paths to bdb environment & data paths.
---
**Note:** For anybody looking at this PR for the first time, I think you can skip the comments before _20 Nov_ and start reading at https://github.com/bitcoin/bitcoin/pull/11687#issuecomment-345625565. Comments before _20 Nov_ were about an earlier version of the PR that didn't include the third commit, and then confusion from not seeing the first commit.
Tree-SHA512: 00bbb120fe0df847cf57014f75f1f7f1f58b0b62fa0b3adab4560163ebdfe06ccdfff33b4231693f03c5dc23601cb41954a07bcea9a4919c8d42f7d62bcf6024
3b26b6af7 qt: Remove TransactionTableModel::TxIDRole (João Barbosa)
Pull request description:
The role `TxIDRole` is a duplicate of `TxHashRole`. This change favours `TxHashRole`.
Tree-SHA512: ad35933eae1cb6b242b25b8940d662c2c79c766732d76fdd410c80230ec084969294a8e5a126794707992a566076ef4452b592050f7af6c4fa7742891090803d
b3ea8ccb7 Simplify Base32 and Base64 conversions (Pieter Wuille)
3296a3bb7 Generalize ConvertBits (Pieter Wuille)
Pull request description:
Generalize `ConvertBits` a bit to also be usable for the existing Base32 and Base64 convertions (rather than just for Bech32).
Tree-SHA512: 3858247f9b14ca4766c08ea040a09b1d6d70caaccc75c2436a54102d6d526f499ec07f5bdfcbbe16cbde5aae521cd16e9aa693e688a97e6c5e74b8e58ee55a13
f08761371 Add tests of listreceivedbyaddress address filtering (Jeremy Rubin)
8ee08120d Add address filtering to listreceivedbyaddress (Jeremy Rubin)
Pull request description:
Supersede https://github.com/bitcoin/bitcoin/pull/9503 created by @JeremyRubin , I will maintain it.
Tree-SHA512: 2accaed493b7e1c2eb5cb5270180f100f8c718b6585b9574f294191c318dc622a79e42ac185300f291f82d3b2a6f1c00850b6b17e4ff2dbab94d71df695acbfe
5b8b38775 Fix overly eager BIP30 bypass (Alex Morcos)
Pull request description:
In #6931 we introduced a possible consensus breaking change by misunderstanding how completely BIP 34 obviated the need for BIP 30. Unfixed, this could break consensus after block height about 1.9M. Explained in code comment.
h/t @sdaftuar
Tree-SHA512: 8f798c3f203432fd4ae1c1c08bd6967b4a5ec2064ed5f6a7dcf3bff34ea830952838dd4ff70d70b5080cf4644f601e5526b60456c08f43789e4aae05621d9d6b
A risk exists where a malicious DNS seeder eclipses a node by returning an enormous number of IP addresses. In this commit we mitigate this risk by limiting the number of IP addresses addrman learns to 256 per DNS seeder.
92f1f8b31 Split off key_io_tests from base58_tests (Pieter Wuille)
119b0f85e Split key_io (address/key encodings) off from base58 (Pieter Wuille)
ebfe217b1 Stop using CBase58Data for ext keys (Pieter Wuille)
32e69fa0d Replace CBitcoinSecret with {Encode,Decode}Secret (Pieter Wuille)
Pull request description:
This PR contains some of the changes left as TODO in #11167 (and built on top of that PR). They are not intended for backporting.
This removes the `CBase58`, `CBitcoinSecret`, `CBitcoinExtKey`, and `CBitcoinExtPubKey` classes, in favor of simple `Encode`/`Decode` functions. Furthermore, all Bitcoin-specific logic (addresses, WIF, BIP32) is moved to `key_io.{h,cpp}`, leaving `base58.{h,cpp}` as a pure utility that implements the base58 encoding/decoding logic.
Tree-SHA512: a5962c0ed27ad53cbe00f22af432cf11aa530e3efc9798e25c004bc9ed1b5673db5df3956e398ee2c085e3a136ac8da69fe7a7d97a05fb2eb3be0b60d0479655
5f8cc0df1 Add a test for large tx output scripts with segwit input. (Richard Kiss)
Pull request description:
This test failed in pycoin but passed in bitcoin, so I thought I'd share it.
Tree-SHA512: 95dff4e03afea4d93ff5e99aa06004446c3df022c2e8a191cac8981107135a5ac2bd3ba1c3a9c4eda9f8f63f584cc1700b7ef57ee6ec2c66a72c699b51bdb61a
f506c0a7f [qt] send: Clear All also resets coin control options (Sjors Provoost)
Pull request description:
This change makes it so that a custom change address and manual input selection are removed if the user clicks Clear All in the send screen.
Tree-SHA512: 78746043a74c9c26ef476eb0df7ce95411683749d9f6b2747222eaac751e241ea7d4d7ce9e4e69ed0b19fa76754d8584e5bef5bba1ad6598f8e39c784b4264d2
b4db76c55 net: Correct addrman logging (Wladimir J. van der Laan)
Pull request description:
These were introduced in #9037.
Found by @theuni (https://github.com/bitcoin/bitcoin/pull/9037#pullrequestreview-101704656).
Tree-SHA512: 9b5153da8a8e5d4ddf9513a5c453f9609cffd4df2924fd48c7b36c1b1055748c7077d4fc0e70be62ca36af87df7f621a744bb374a234baba271ce4982a240825
1dfb4e7d7 [Tests] Check output of parent/child tx list from getrawmempool, getmempooldescendants, getmempoolancestors, and REST interface (Conor Scott)
fc44cb108 [RPC] Add list of child transactions to verbose output of getrawmempool (Conor Scott)
Pull request description:
`bitcoin-cli getrawmempool true` only lists a transaction's parents in the `depends` field. This change adds a `spentby` field to the json response, which lists the transaction's children in the mempool.
Currently the only way to find child transactions is to use `getrawmempool` or make another call to `getmempooldescendants` and search the response for transactions that list the parent_txid in the `depends` list, which is inefficient.
This change allows direct lookup of children.
Example Output
```
"9a9b5733c0d89f207908cfa3fe17809bee71f629aa095c9f8754524e29e98ba4": {
...other geterawmempool data...
"wtxid": "9a9b5733c0d89f207908cfa3fe17809bee71f629aa095c9f8754524e29e98ba4",
"depends": [
"bdd92851d5766a42aeb62af667bb422a116cab4e032bba5e3dd6efe5b4b40aa0"
],
"spentby": [
"dc5d3ec388a9121421208738a041ac30a22163bc2e17758f2275b6c51a15ba7b"
]
},
```
Tree-SHA512: 83da7d421c9799a40ef65af3b7fdb586d6d87385f3f2ede3afd2c311725444b858f9d91cc110422a0fa31905779934fee07211ca6fe6b746792b83692c94b3ce
22b4aae02 [arith_uint256] Avoid unnecessary this-copy using prefix operator (Karl-Johan Alm)
Pull request description:
I noticed while profiling a related project that `operator-()` actually calls the `base_uint` constructor, which is because the postfix operator version of `operator++` (used in `operator-()`) creates a copy of `this` and returns it.
Tree-SHA512: d9a2665caa3d93f064cdeaf1c6fada101b9943bb53d93ccac6d9a0edac20279d2e921349e30239039c71e0a9629e45c29ec9f10d8d7499e936cdba6cb7c3c3eb
b7cd08b71 Add documentation to PeerLogicValidation interface and related functions (James O'Beirne)
Pull request description:
Adds docs for PeerLogicValidation's public interface and two related functions.
Tree-SHA512: b4c2f47e9baa9396d2b6faf3792e46b371c50cd91b9ac890f263f4d14eb24a71e7b40ceb4cbb41e254f5008eff357f417b842618e7ebece9039802ab2a5dd728
e68172ed9 Add test-before-evict discipline to addrman (Ethan Heilman)
Pull request description:
This change implement countermeasures 3 (test-before-evict) suggested in our paper: ["Eclipse Attacks on Bitcoin’s Peer-to-Peer Network"](http://cs-people.bu.edu/heilman/eclipse/).
# Design:
A collision occurs when an address, addr1, is being moved to the tried table from the new table, but maps to a position in the tried table which already contains an address (addr2). The current behavior is that addr1 would evict addr2 from the tried table.
This change ensures that during a collision, addr1 is not inserted into tried but instead inserted into a buffer (setTriedCollisions). The to-be-evicted address, addr2, is then tested by [a feeler connection](https://github.com/bitcoin/bitcoin/pull/8282). If addr2 is found to be online, we remove addr1 from the buffer and addr2 is not evicted, on the other hand if addr2 is found be offline it is replaced by addr1.
An additional small advantage of this change is that, as no more than ten addresses can be in the test buffer at once, and addresses are only cleared one at a time from the test buffer (at 2 minute intervals), thus an attacker is forced to wait at least two minutes to insert a new address into tried after filling up the test buffer. This rate limits an attacker attempting to launch an eclipse attack.
# Risk mitigation:
- To prevent this functionality from being used as a DoS vector, we limit the number of addresses which are to be tested to ten. If we have more than ten addresses to test, we drop new addresses being added to tried if they would evict an address. Since the feeler thread only creates one new connection every 2 minutes the additional network overhead is limited.
- An address in tried gains immunity from tests for 4 hours after it has been tested or successfully connected to.
# Tests:
This change includes additional addrman unittests which test this behavior.
I ran an instance of this change with a much smaller tried table (2 buckets of 64 addresses) so that collisions were much more likely and observed evictions.
```
2016-10-27 07:20:26 Swapping 208.12.64.252:8333 for 68.62.95.247:8333 in tried table
2016-10-27 07:20:26 Moving 208.12.64.252:8333 to tried
```
I documented tests we ran against similar earlier versions of this change in #6355.
# Security Benefit
This is was originally posted in PR #8282 see [this comment for full details](https://github.com/bitcoin/bitcoin/pull/8282#issuecomment-237255215).
To determine the security benefit of these larger numbers of IPs in the tried table I modeled the attack presented in [Eclipse Attacks on Bitcoin’s Peer-to-Peer Network](https://eprint.iacr.org/2015/263).
**Default node:** 595 attacker IPs for ~50% attack success.
**Default node + test-before-evict:** 620 attacker IPs for ~50% attack success.
**Feeler node:** 5540 attacker IPs for ~50% attack success.
**Feeler node + test-before-evict:** 8600 attacker IPs for ~50% attack success.
The node running feeler connections has 10 times as many online IP addresses in its tried table making an attack 10 times harder (i.e. requiring the an attacker require 10 times as many IP addresses in different /16s). Adding test-before-evict increases resistance of the node by an additional 3000 attacker IP addresses.
Below I graph the attack over even greater attacker resources (i.e. more attacker controled IP addresses). Note that test-before-evict maintains some security far longer even against an attacker with 50,000 IPs. If this node had a larger tried table test-before-evict could greatly boost a nodes resistance to eclipse attacks.
Tree-SHA512: fdad4d26aadeaad9bcdc71929b3eb4e1f855b3ee3541fbfbe25dca8d7d0a1667815402db0cb4319db6bd3fcd32d67b5bbc0e12045c4252d62d6239b7d77c4395
6fbc0986f gui: Show messages as text not html (Wladimir J. van der Laan)
Pull request description:
Currently, error messages (such as InitError) are displayed as-is, which means Qt does auto detection on the format.
This means that it's possible to inject HTML from the command line though e.g. specifying a wallet name with HTML in it. This isn't a direct security risk because fetching content from internet is
disabled (and as far as I know we never report strings received from the network this way). However, it can be confusing.
So explicitly force the format as text.
Tree-SHA512: 96c9196f20552544b862071bca61817ef03653019cc3548023d435f3a9c48b6cd501fab3246783cb0be68c8c7bb1b865913d92070a7c4e84e82c6577709f0934
cfaac2a60 Add build support for 'gprof' profiling. (murrayn)
Pull request description:
Support for profiling build: `./configure --enable-profiling`
Tree-SHA512: ea983cfce385f1893bb4ab7f94ac141b7d620951dc430da3bbc92ae1357fb05521eac689216e66dc87040171a8a57e76dd7ad98036e12a2896cfe5ab544347f0
937bf4335 Use std:🧵:hardware_concurrency, instead of Boost, to determine available cores (fanquake)
Pull request description:
Following discussion on IRC about replacing Boost usage for detecting available system cores, I've opened this to collect some benchmarks + further discussion.
The current method for detecting available cores was introduced in #6361.
Recap of the IRC chat:
```
21:14:08 fanquake: Since we seem to be giving Boost removal a good shot for 0.15, does anyone have suggestions for replacing GetNumCores?
21:14:26 fanquake: There is std:🧵:hardware_concurrency(), but that seems to count virtual cores, which I don't think we want.
21:14:51 BlueMatt: fanquake: I doubt we'll do boost removal for 0.15
21:14:58 BlueMatt: shit like BOOST_FOREACH, sure
21:15:07 BlueMatt: but all of boost? doubtful, there are still things we need
21:16:36 fanquake: Yea sorry, not the whole lot, but we can remove a decent chunk. Just looking into what else needs to be done to replace some of the less involved Boost usage.
21:16:43 BlueMatt: fair
21:17:14 wumpus: yes, it makes sense to plan ahead a bit, without immediately doing it
21:18:12 wumpus: right, don't count virtual cores, that used to be the case but it makes no sense for our usage
21:19:15 wumpus: it'd create a swarm of threads overwhelming any machine with hyperthreading (+accompanying thread stack overhead), for script validation, and there was no gain at all for that
21:20:03 sipa: BlueMatt: don't worry, there is no hurry
21:59:10 morcos: wumpus: i don't think that is correct
21:59:24 morcos: suppose you have 4 cores (8 virtual cores)
21:59:24 wumpus: fanquake: indeed seems that std has no equivalent to physical_concurrency, on any standard. That's annoying as it is non-trivial to implement
21:59:35 morcos: i think running par=8 (if it let you) would be notably faster
21:59:59 morcos: jeremyrubin and i discussed this at length a while back... i think i commented about it on irc at the time
22:00:21 wumpus: morcos: I think the conclusion at the time was that it made no difference, but sure would make sense to benchmark
22:00:39 morcos: perhaps historical testing on the virtual vs actual cores was polluted by concurrency issues that have now improved
22:00:47 wumpus: I think there are not more ALUs, so there is not really a point in having more threads
22:01:40 wumpus: hyperthreads are basically just a stored register state right?
22:02:23 sipa: wumpus: yes but it helps the scheduler
22:02:27 wumpus: in which case the only speedup using "number of cores" threads would give you is, possibly, excluding other software from running on the cores on the same time
22:02:37 morcos: well this is where i get out of my depth
22:02:50 sipa: if one of the threads is waiting on a read from ram, the other can use the arithmetic unit for example
22:02:54 morcos: wumpus: i'm pretty sure though that the speed up is considerably more than what you might expect from that
22:02:59 wumpus: sipa: ok, I back down, I didn't want to argue this at all
22:03:35 morcos: the reason i haven't tested it myself, is the machine i usually use has 16 cores... so not easy due to remaining concurrency issues to get much more speedup
22:03:36 wumpus: I'm fine with restoring it to number of virtual threads if that's faster
22:03:54 morcos: we should have somene with 4 cores (and  actually test it though, i agree
22:03:58 sipa: i would expect (but we should benchmark...) that if 8 scriot validation threads instead of 4 on a quadcore hyperthreading is not faster, it's due to lock contention
22:04:20 morcos: sipa: yeah thats my point, i think lock contention isn't that bad with 8 now
22:04:22 wumpus: on 64-bit systems the additional thread overhead wouldn't be important at least
22:04:23 gmaxwell: I previously benchmarked, a long time ago, it was faster.
22:04:33 gmaxwell: (to use the HT core count)
22:04:44 wumpus: why was this changed at all then?
22:04:47 wumpus: I'm confused
22:05:04 sipa: good question!
22:05:06 gmaxwell: I had no idea we changed it.
22:05:25 wumpus: sigh 
22:05:54 gmaxwell: What PR changed it?
22:06:51 gmaxwell: In any case, on 32-bit it's probably a good tradeoff... the extra ram overhead is worth avoiding.
22:07:22 wumpus: https://github.com/bitcoin/bitcoin/pull/6361
22:07:28 gmaxwell: PR 6461 btw.
22:07:37 gmaxwell: er lol at least you got it right.
22:07:45 wumpus: the complaint was that systems became unsuably slow when using that many thread
22:07:51 wumpus: so at least I got one thing right, woohoo
22:07:55 sipa: seems i even acked it!
22:07:57 BlueMatt: wumpus: there are more alus
22:08:38 BlueMatt: but we need to improve lock contention first
22:08:40 morcos: anywya, i think in the past the lock contention made 8 threads regardless of cores a bit dicey.. now that is much better (although more still to be done)
22:09:01 BlueMatt: or we can just merge #10192, thats fee
22:09:04 gribble: https://github.com/bitcoin/bitcoin/issues/10192 | Cache full script execution results in addition to signatures by TheBlueMatt · Pull Request #10192 · bitcoin/bitcoin · GitHub
22:09:11 BlueMatt: s/fee/free/
22:09:21 morcos: no, we do not need to improve lock contention first. but we should probably do that before we increase the max beyond 16
22:09:26 BlueMatt: then we can toss concurrency issues out the window and get more speedup anyway
22:09:35 gmaxwell: wumpus: yea, well in QT I thought we also diminished the count by 1 or something? but yes, if the motivation was to reduce how heavily the machine was used, thats fair.
22:09:56 sipa: the benefit of using HT cores is certainly not a factor 2
22:09:58 wumpus: gmaxwell: for the default I think this makes a lot of sense, yes
22:10:10 gmaxwell: morcos: right now on my 24/28 physical core hosts going beyond 16 still reduces performance.
22:10:11 wumpus: gmaxwell: do we also restrict the maximum par using this? that'd make less sense
22:10:51 wumpus: if someone *wants* to use the virtual cores they should be able to by setting -par=
22:10:51 sipa: *flies to US*
22:10:52 BlueMatt: sipa: sure, but the shared cache helps us get more out of it than some others, as morcos points out
22:11:30 BlueMatt: (because it means our thread contention issues are less)
22:12:05 morcos: gmaxwell: yeah i've been bogged down in fee estimation as well (and the rest of life) for a while now.. otherwise i would have put more effort into jeremy's checkqueue
22:12:36 BlueMatt: morcos: heh, well now you can do other stuff while the rest of us get bogged down in understanding fee estimation enough to review it 
22:12:37 wumpus: [to answer my own question: no, the limit for par is MAX_SCRIPTCHECK_THREADS, or 16]
22:12:54 morcos: but to me optimizing for more than 16 cores is pretty valuable as miners could use beefy machines and be less concerned by block validation time
22:14:38 BlueMatt: morcos: i think you may be surprised by the number of mining pools that are on VPSes that do not have 16 cores 
22:15:34 gmaxwell: I assume right now most of the time block validation is bogged in the parts that are not as concurrent. simple because caching makes the concurrent parts so fast. (and soon to hopefully increase with bluematt's patch)
22:17:55 gmaxwell: improving sha2 speed, or transaction malloc overhead are probably bigger wins now for connection at the tip than parallelism beyond 16 (though I'd like that too).
22:18:21 BlueMatt: sha2 speed is big
22:18:27 morcos: yeah lots of things to do actually...
22:18:57 gmaxwell: BlueMatt: might be a tiny bit less big if we didn't hash the block header 8 times for every block. 
22:21:27 BlueMatt: ehh, probably, but I'm less rushed there
22:21:43 BlueMatt: my new cache thing is about to add a bunch of hashing
22:21:50 BlueMatt: 1 sha round per tx
22:22:25 BlueMatt: and sigcache is obviously a ton
```
Tree-SHA512: a594430e2a77d8cc741ea8c664a2867b1e1693e5050a4bbc8511e8d66a2bffe241a9965f6dff1e7fbb99f21dd1fdeb95b826365da8bd8f9fab2d0ffd80d5059c
Changes addrman to use the test-before-evict discipline in which an
address is to be evicted from the tried table is first tested and if
it is still online it is not evicted.
Adds tests to provide test coverage for this change.
This change was suggested as Countermeasure 3 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
Currently, error messages (such as InitError) are displayed as-is, which
means Qt does auto detection on the format.
This means that it's possible to inject HTML from the command line
though e.g. specifying a wallet name with HTML in it. This isn't
a direct security risk because fetching content from internet is
disabled (and as far as I know we never report strings received
from the network this way). However, it can be confusing.
So explicitly force the format as text.
741f0177c Add DynamicMemoryUsage() to LevelDB (Evan Klitzke)
Pull request description:
This adds a new method `CDBWrapper::DynamicMemoryUsage()` similar to Bitcoin's existing methods of the same name. It's implemented by asking LevelDB for the information, and then parsing the string response. I've also added logging to `CDBWrapper::WriteBatch()` to track this information:
```
$ tail -f ~/.bitcoin/testnet3/debug.log | grep WriteBatch
2018-03-05 19:34:55 WriteBatch memory usage: db=chainstate, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:17 WriteBatch memory usage: db=index, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:17 WriteBatch memory usage: db=chainstate, before=0.0MiB, after=8.0MiB
2018-03-05 19:35:22 WriteBatch memory usage: db=index, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:22 WriteBatch memory usage: db=chainstate, before=8.0MiB, after=17.0MiB
2018-03-05 19:35:26 WriteBatch memory usage: db=index, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:27 WriteBatch memory usage: db=chainstate, before=9.0MiB, after=18.0MiB
2018-03-05 19:35:40 WriteBatch memory usage: db=index, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:41 WriteBatch memory usage: db=chainstate, before=9.0MiB, after=7.0MiB
2018-03-05 19:35:52 WriteBatch memory usage: db=index, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:52 WriteBatch memory usage: db=chainstate, before=7.0MiB, after=9.0MiB
^C
```
As LevelDB doesn't seem to provide a way to get the database name, I've also added a new `m_name` field to the `CDBWrapper`. This is necessary because we have multiple LevelDB databases (two now, and possibly more later, e.g. #11857).
I am using this information in other branches where I'm experimenting with changing LevelDB buffer sizes.
Tree-SHA512: 7ea8ff5484bb07ef806af17d000c74ccca27d2e0f6c3229e12d93818f00874553335d87428482bd8acbcae81ea35aef2a243326f9fccbfac25989323d24391b4
874e81808 Allow dustrelayfee to be set to zero (Luke Dashjr)
Pull request description:
I don't see and can't think of any rationale for forbidding this configuration.
Tree-SHA512: df09441f4aec63e79bea94838b7f8e336cebaeb0a22b5e58d27937bbeb1377f229921aeae43674e0b63fc40a39ae51a264d48aa1cdb4cbd0e3339d32856698bf
9c5a4a6ed Stop special-casing phashBlock handling in validation for TBV (Matt Corallo)
Pull request description:
There is no reason to do this, really, we already have "ignore PoW" flags. Motivated by https://github.com/bitcoin/bitcoin/pull/11739#discussion_r155841721
Tree-SHA512: 37cb1ae5b11c9e8ed7a679bb07ad3b119a2a014744b26d197d67ba21beb19fe6815271df935e40f7c7bd5f2e4d7ae4dad7bd4d00fa230a8d789f37e9de31a769
0bc095efd [qt] Improved "custom fee" explanation in tooltip (Randolf Richardson)
Pull request description:
Thanks to @dooglus for asking about this tooltip in Issue 12500.
Reference: https://www.github.com/bitcoin/bitcoin/issues/12500
I would also appreciate it if someone can confirm that 1 kilobyte in this field indeed represents 1,000 bytes rather than 1,024 bytes (if it's supposed to be 1,024, then I'll gladly make the necessary changes to reflect this).
Tree-SHA512: da2fe0128411b5ef6f0a26382a80601efcf823c3f3591bdd83a7fe7e25777728e7eb89e2e8b175b991566e63838aca12d204792f981031b86e7b2ba28ca50021
9360f5032 Drop extra script variable in ProduceSignature (Russell Yanofsky)
Pull request description:
Was slightly confusing.
Tree-SHA512: 1d18f92c133772ffc8eb71826c8d778988839a14bcefc50f9c591111b0a5f81ebc12bca0f1ab25d5fdd02d3d50c2325c04cbfcbdcd18a7b80ca112d049c2327d
2736c9e05 Avoid unintentional unsigned integer wraparounds in tests (practicalswift)
Pull request description:
Avoid unintentional unsigned integer wraparounds in tests.
This is a subset of #11535 as suggested by @MarcoFalke :-)
Tree-SHA512: 4f4ee8a08870101a3f7451aefa77ae06aaf44e3c3b2f7555faa2b8a8503f97f34e34dffcf65154278f15767dc9823955f52d1aa7b39930b390e57cdf2b65e0f3
18307849b Consensus: Fix bug when compiler do not support __builtin_clz* (532479301)
Pull request description:
#ifdef is not correct since defination is defined to 0 or 1. Should change to #if
Tree-SHA512: ba13a591d28f4d7d6ebaab081be4304c43766a611226f8d2994c8db415dfcf318e82217d26a8c4af290760c68eded9503b39535b0e6e079ded912e6a8fca5b36
fa9461473 [doc] dev-notes: Members should be initialized (MarcoFalke)
Pull request description:
Also, remove mention of threads that were removed long ago.
Motivation:
Make it easier to spot bugs such as #11654 and #12426
Tree-SHA512: 8ca1cb54e830e9368803bd98a8b08c39bf2d46f079094ed7e070b32ae15a6e611ce98d7a614f897803309f4728575e6bc9357fab1157c53d2536417eb8271653
The call to CheckBlock() in ConnectBlock() is redundant with calls to it
prior to storing a block on disk. If CheckBlock() fails with an error
indicating the block is potentially corrupted, then shut down
immediately, as this is an indication that the node is experiencing
hardware issues. (If we didn't shut down, we could go into an infinite
loop trying to reconnect this same bad block, as we're not setting the
block's status to FAILED in the case where there is potential
corruption.)
If CheckBlock() fails for some other reason, we'll end up flagging this
block as bad (perhaps some prior software version "let a bad block in",
as the comment indicates), and not trying to connect it again, so this
case should be properly handled.
ee041196fc Show a transaction's virtual size in its details dialog. (Chris Moore)
Pull request description:
#12501 looks like it is going to mention transaction's "virtual size" in the custom fee tooltip, so let's display the virtual size when the user double-clicks a transaction.
Tree-SHA512: c60ae23c9f86edfba086b840519941d8e8ee1be9da5987ffe6dee3255943ea5d215708ce57464f109a1d1c612c4c0eeb11f8f3e203d8a8cfc1f8ec753a8aac27
This change should make it easier for users to make complete backups of wallets
because they can now just back up the specified `-wallet=<path>` path directly,
instead of having to back up the specified path as well as the transaction log
directory (for incompletely flushed wallets).
Another advantage of this change is that if two wallets are located in the same
directory, they will now use their own BerkeleyDB environments instead using a
shared environment. Using a shared environment makes it difficult to manage and
back up wallets separately because transaction log files will contain a mix of
data from all wallets in the environment.
Remove requirement that two wallet files can only be opened at the same time if
they are contained in the same directory.
This change mostly consists of updates to function signatures (updating
functions to take fs::path arguments, instead of combinations of strings,
fs::path, and CDBEnv / CWalletDBWrapper arguments).
New global variables were introduced in #11882 and not setting them causes:
wallet/test/wallet_tests.cpp(638): error in "ListCoins": check wallet->CreateTransaction({recipient}, wtx, reservekey, fee, changePos, error, dummy) failed
wallet/test/wallet_tests.cpp(679): error in "ListCoins": check list.begin()->second.size() == 2 failed [1 != 2]
wallet/test/wallet_tests.cpp(686): error in "ListCoins": check available.size() == 2 failed [1 != 2]
wallet/test/wallet_tests.cpp(705): error in "ListCoins": check list.begin()->second.size() == 2 failed [1 != 2]
It's possible to reproduce the failure reliably by running:
src/test/test_bitcoin --log_level=test_suite --run_test=wallet_tests/ListCoins
Failures happen nondeterministically because boost test framework doesn't run
tests in a specified order, and tests that run previously can set the global
variables and mask the bug.
3f592b8 [QA] add wallet-rbf test (Jonas Schnelli)
8222e05 Disable wallet fallbackfee by default on mainnet (Jonas Schnelli)
Pull request description:
Removes the default fallback fee on mainnet (but keeps it on testnet/regtest).
Transactions using the fallbackfee in case the fallback fee has not been set are getting rejected.
Tree-SHA512: e54d2594b7f954e640cc513a18b0bfbe189f15e15bdeed4fe02b7677f939bca1731fef781b073127ffd4ce08a595fb118259b8826cdaa077ff7d5ae9495810db
eb91835 Add setter for g_initial_block_download_completed (Jonas Schnelli)
3f56df5 [QA] add NODE_NETWORK_LIMITED address relay and sync test (Jonas Schnelli)
158e1a6 [QA] fix mininode CAddress ser/deser (Jonas Schnelli)
fa999af [QA] Allow addrman loopback tests (add debug option -addrmantest) (Jonas Schnelli)
6fe57bd Connect to peers signaling NODE_NETWORK_LIMITED when out-of-IBD (Jonas Schnelli)
31c45a9 Accept addresses with NODE_NETWORK_LIMITED flag (Jonas Schnelli)
Pull request description:
Eventually connect to peers signalling NODE_NETWORK_LIMITED if we are out of IBD.
Accept and relay NODE_NETWORK_LIMITED peers in addrman.
Tree-SHA512: 8a238fc97f767f81cae1866d6cc061390f23a72af4a711d2f7158c77f876017986abb371d213d1c84019eef7be4ca951e8e6f83fda36769c4e1a1d763f787037
e7d9fc5 [qt] navigate to transaction history page after send (Sjors Provoost)
Pull request description:
Before this change QT just remained on the Send tab, which I found confusing. Now it switches to the Transactions tab. This makes it more clear to the user that the send actually succeeded, and here they can monitor progress.
Ideally I would like to highlight the transaction, e.g. by refactoring `TransactionView::focusTransaction(const QModelIndex &idx)` to accept a transaction hash, but I'm not sure how to do that.
Tree-SHA512: 8aa93e03874de8434e18951f8aec47377814c0bcaf7eda4766fc41d5a4e32806346e12e4139e4d45468dfdf0b786f5a7faa393a31b8cd6c65ccac21fb3782c33
5aad635 Use memset() to optimize prevector::resize() (Evan Klitzke)
e46be25 Reduce redundant code of prevector and speed it up (Akio Nakamura)
f0e7aa7 Add new prevector benchmarks. (Evan Klitzke)
Pull request description:
This branch optimizes various `prevector` operations, especially resizing vectors. While profiling the `loadblk` thread I noticed that a lot of time was being spent in `prevector::resize()` which led to this work. I have some data here indicating that it takes up **37%** of the time in `ReadBlockFromDisk()`: https://monad.io/readblockfromdisk.svg
This branch improves things significantly. For trivial types, the new results for the prevector benchmark are:
* `PrevectorClearTrivial` which tests `prevector::clear()` becomes 24.6x faster
* `PrevectorDestructorTrivial` which tests `prevector::~prevector()` becomes 20.5x faster
* `PrevectorResizeTrivial` which tests `prevector::resize()` becomes 20.3x faster
Note that in practice it looks like the prevector is only used to contain `unsigned char` types, which is a trivial type. The benchmarks are testing a bit of an extreme case, but the changes here are motivated by the profiling data for `ReadBlockFromDisk()` I linked to above.
The pull request here consists of a series of three commits:
* The first adds new benchmarks but does not change the prevector code.
* The second is from @AkioNak , and merges some prevector optimizations he submitted in #11988
* The third optimizes `prevector::resize()` to use `memset()` when the prevector contains trivially constructible types
Tree-SHA512: 28f7cbb91a19f9f43b6a5942781d7eb2e3197389186b666f086b69df12bee37773140f765426d715bfb8ebff79cb27a5f1206d0325b54b4aa65598b50fb18368
From the header include guidelines (developer-notes.md):
"One exception is that a `.cpp` file does not need to re-include the
includes already included in its corresponding `.h` file."
* rpc/util.h includes pubkey.h + utilstrencodings.h. rpc/util.cpp includes rpc/util.h.
* util.h includes fs.h. util.cpp includes util.h.
Further optimize prevector::resize() (which is called by a number of
other prevector methods) to use memset to initialize memory when the
prevector contains trivial types.
In prevector.h, the code which like item_ptr(size()) apears in the loop.
Both item_ptr() and size() judge whether values are held directly or
indirectly, but in most cases it is sufficient to make that judgement
once outside the loop.
This PR adds 2 private function fill() which has the loop to initialize
by specified value (or iterator of the other prevector's element),
but don't call item_ptr() in their loop.
Other functions(assign(), constructor, operator=(), insert())
that has similar loop, call fill() instead of original loop.
Also, resize() was changed like fill(), but it calls the default
constructor for that element each time.
90ba2df11 Fix missing cs_main lock for GuessVerificationProgress() (Jonas Schnelli)
Pull request description:
`GuessVerificationProgress()` needs `cs_main` due to accessing the `pindex->nChainTx`.
This adds a `AssertLockHeld` in `GuessVerificationProgress()` and adds the missing locks in...
* `LoadChainTip()`
* `ScanForWalletTransactions()` (got missed in #11281)
* GUI, `ClientModel::getVerificationProgress()` <--- **this may have GUI performance impacts**, but could be relaxed later with a cache or something more efficient.
Tree-SHA512: 13302946571422375f32af8e396b9d2c1180f2693ea363aeba9e98c8266ddec64fe7862bfdcbb5a93a4b12165a61eec1e51e4e7d7a8515fa50879095dc163412
835a21b Squashed 'src/leveldb/' changes from c521b3ac65..64052c76c5 (MarcoFalke)
Pull request description:
Pull in changes from https://github.com/bitcoin/bitcoin/pull/11674#issuecomment-348174674.
Merges cleanly into master and 0.16 branch.
Tree-SHA512: 819c042c0dfac8dc3078fc182c1e22d4a85b343967475d3389be5b5b056361114d8c9892437cd1dc4b45808c27880c0e166e047afc2c2bd2bbc33e55336a8c33
d2ee6e3 init: Remove translation for `-blockmaxsize` option help (Wladimir J. van der Laan)
Pull request description:
Move `-blockmaxsize`, a deprecated option which is replaced by `-blockmaxweight`, to debug options and remove the translation.
This message is absolutely terrible for translators (esp the `* 4` part).
(for 0.17 we should probably remove this option completely?)
(reported by French Language Coordinator)
Tree-SHA512: 379150c9217672d2f2f93b4c02a3ac638e77ca56fb518e30c56c46d59f89eac422b4f540e70a9abd3c6ad653ac4b786d4734621b18f93804885d81e223f1a908
a6e6e39a8b Bugfix: respect user defined configuration file (-conf) when open conf. file from QT settings (Jonas Schnelli)
Pull request description:
Fixes#12488.
In master, opening the configuration file from the GUI settings will always open the file "bitcoin.conf" regardless of the `-conf=` settings.
This PR makes the GUI settings open configuration file function respect the `-conf` option.
Tree-SHA512: fb54cc699b4d2a3947f749fdf5f1a51251ffd67d0f6c6a937a5b80f0ba5a5c1085d0eef190453bbc04696d4d76c2c266de0fe9712e65e4bb36116158b54263d4
Move `-blockmaxsize`, a deprecated option which is replaced by
`-blockmaxweight`, to debug options and remove the translation.
This message is absolutely terrible for translators (esp the `* 4`
part).
Splits signrwatransaction into a wallet version (signrawtransactionwithwallet) and
non-wallet version (signrawtransactionwithkey). signrawtransaction is marked as DEPRECATED
and will call the right signrawtransaction* command as per the parameters in order to
maintain compatibility.
Updated signrawtransactions test to use new RPCs
b22cce014 scripted-diff: validateaddress to getaddressinfo in tests (Andrew Chow)
b98bfc5ed Create getaddressinfo RPC and deprecate parts of validateaddress (Andrew Chow)
1598f3230 [rpc] Move DescribeAddressVisitor to rpc/util (John Newbery)
39633ecd5 [rpc] split wallet and non-wallet parts of DescribeAddressVisitor (John Newbery)
Pull request description:
This PR makes a new RPC command called `getaddressinfo` which relies on the wallet. It contains all of `validateaddress`'s address info stuff. Those parts in `validateaddress` have been marked as deprecated. The tests have been updated to use `getaddressinfo` except the `disablewallet` test which is the only test that actually uses `validateaddress` to validate an address.
Tree-SHA512: ce00ed0f2416200b8de1e0a75e8517c024be0b6153457d302c3879b3491cce28191e7c29aed08ec7d2eeeadc62918f5c43a7cb79cd2e4b6d9291bd83ec31c852
Previously this was an inline test where the specificity was probably judged
overly specific. As a class method it makes sense to maintain consistency.
And replace some magic values with their constant equivalents.
Moves the parts of validateaddress which require the wallet into getaddressinfo
which is part of the wallet RPCs. Mark those parts of validateaddress which
require the wallet as deprecated.
Validateaddress will call getaddressinfo
for the data that both share for right now.
Moves IsMine functions to libbitcoin_common and then links libbitcoin_wallet
before libbitcoin_common in order to prevent linker errors since IsMine is no
longer used in libbitcoin_server.
Previously, if `invalidateblock` was called on a block in a branch,
NotifyBlockTip would be called on that block's predecessor, creating an
incorrect `rpc/blockchain.cpp:latestblock` value.
Only call NotifyBlockTip if the chain being modified is activeChain.
be45a67 Add some script tests related to BOOL ops and odd values like negative 0. (Richard Kiss)
Pull request description:
Add some script tests related to BOOL ops and odd values like negative 0.
Tree-SHA512: 8e633f7ea5eea39e31016994baf60f295fa1dc8cae27aa5fcfc741ea97136bfb3ddc57bb62b9c6bf9fe256fc09cdd184906ba8e611e297cf8d2d363da2bbf1d4
5f605e1 Make signrawtransaction accept P2SH-P2WSH redeemscripts (Pieter Wuille)
Pull request description:
This is a quick fix for #12418, which is a regression in 0.16.
It permits specifying just the inner redeemscript to let `signrawtransaction` succeed. This inner redeemscript is already reported by `addmultisigaddress` & co.
#11708 uses a different approach, where `listunspent` reports both inner & outer redeemscript, but requires both to be provided to `signrawtransaction`. Part of #11708 is still needed even in combination with this PR however, as currently the inner redeemscript isn't reported by `listunspent`.
Tree-SHA512: a6fa2b2661ce04db25cf029dd31da39c0b4811d43692f816dfe0f77b4159b5e2952051664356a579f690ccd58a626e0975708afcd7ad5919366c490944e3a9a5
1d4cbd2 test: Add unit test for LockDirectory (Wladimir J. van der Laan)
fc888bf util: Fix multiple use of LockDirectory (Wladimir J. van der Laan)
Pull request description:
Wrap the `boost::interprocess::file_lock` in a `std::unique_ptr` inside the map that keeps track of per-directory locks.
This fixes a build issue with the clang 4.0.0+boost-1.58.0p8 version combo on OpenBSD 6.2, and should have no effect otherwise.
Also add a unit test, make the function thread-safe, and fix Linux versus Windows behavior inconsistency.
Meant to fix#12413.
Tree-SHA512: 1a94c714c932524a51212c46e8951c129337d57b00fd3da5a347c6bcf6a947706cd440f39df935591b2079995136917f71ca7435fb356f6e8a128c509a62ec32
bb00c95 Consistently use FormatStateMessage in RPC error output (Ben Woosley)
8b8a1c4 Add test for 'mempool min fee not met' rpc error (Ben Woosley)
c04e0f6 Fix 'mempool min fee not met' debug output (Ben Woosley)
Pull request description:
Output the value that is tested, rather than the unmodified fee value.
Prompted by looking into: #11955
Tree-SHA512: fc0bad47d4af375d208f657a6ccbad6ef7f4e2989ae2ce1171226c22fa92847494a2c55cca687bd5a1548663ed3313569bcc31c00d53c0c193a1b865dd8a7657
