59e387705c test: add invalid tx templates for use in functional tests (James O'Beirne)
Pull request description:
This change adds a list of `CTransaction`-generating templates which each correspond to a specific type of invalid transaction. We then use this list to test for a wider variety of invalid tx types in `p2p_invalid_tx.py` and `feature_block.py`.
Consolidating all invalid tx types will allow us to more easily cover all tx reject cases from a variety of tests without repeating ourselves. Validation logic doesn't differ much between mempool and block acceptance, but there *is* a difference and we should be sure we're testing both comprehensively.
Right now, I've only added templates covering the tx reject types listed below but if this approach seems worthwhile I will expand the list to be fully comprehensive.
```
bad-txns-in-belowout
bad-txns-inputs-duplicate
bad-txns-too-many-sigops
bad-txns-vin-empty
bad-txns-vout-empty
bad-txns-vout-negative
```
Tree-SHA512: 05407f4a953fbd7c44c08bb49bb989cefd39a2b05ea00f5b3c92197a3f05e1b302f789e33832445734220e1c333d133aba385740b77b84139b170c583471ce20
4999992c34 whitespace: Split ~300 char line into multiple ones (MarcoFalke)
fa71b38168 scripted-diff: Rename rpc_timewait to rpc_timeout (MarcoFalke)
fa3e5786d0 scripted-diff: Remove unused 'split' parameter to setup_network (MarcoFalke)
Pull request description:
This is a bugfix, since wallet_dump currently uses the wrong name:
18857b4c40/test/functional/wallet_dump.py (L89-L92)
Rename all to the same name with a scripted diff (and some unrelated cleanups).
Tree-SHA512: 338ddd20dae12e6cf7aa7adbcfb239cf648017a1572b373f8431fecb184bd2a65492846d81e75a023864d9e41c94afb53044c16b79651a5937d34a5a6b772f81
2474de0265 Fix running individually through test_runner.py, as suggested by @MarcoFalke (#14732) (Kristaps Kaupe)
Pull request description:
As suggested by @MarcoFalke. Resolves#14732.
Tree-SHA512: b4e400ba06075e218dbd97d0390845f1c55be42a2b6fd70513381318cfc2693473ba1d0f9d7f379a96939d1960b53801fad7c02e06bddc50c5a835ad024c37ef
fa4b8c90d3 test: add_nodes can only be called once after set_test_params (MarcoFalke)
faa831102a Revert "tests: Support calling add_nodes more than once" (MarcoFalke)
Pull request description:
Writing tests should be straightforward and with little side-effects as possible.
I don't see how this is needed and can not be achieved with `self.num_nodes` (and `self.extra_args` et al.)
Tree-SHA512: 83a67f2cba9d97e21d80847ff405a4633fcb0d5674486efa57ee1813e46efe8709ae0fb462b8339a01ebeca5c4f2d29ecb1807d648b8fd9ee8ce336b08d580a8
98a1846b00 tests: Support calling add_nodes more than once (Steven Roose)
Pull request description:
Ran into this while writing [a multi-chain test for Elements](https://github.com/ElementsProject/elements/pull/458) where I call this method more than once.
Tree-SHA512: f2d698fcb560552aa5d81a4c3fbf40b7269b228b34d85a118291649ef83f8c0a30cd82a28d418237b55893bcecd538046b704e64a4d8a41f2c0aef8033dc83e5
aaaa8eb1ed test: consensus: Check that final transactions are valid (MarcoFalke)
fae3617d79 test: Correctly deserialize without witness (MarcoFalke)
Pull request description:
There is no check that checks that final transactions are valid, i.e. the consensus rules could be changed (accidentally) with none of the tests failing.
Tree-SHA512: 48f4c24bfcc525ddbc1bfe8c37131953b464823428c1f7a278ba6d98b98827b6b84a8eb2b33396bfb5b8cc4012b7cc1cd771637f405ea20beddae001c22aa290
31926ee8cf [test] functional framework: add CScript hex() for Python 3.4 (Sjors Provoost)
74ce326831 [test] Travis: enforce Python 3.4 support in functional tests (Sjors Provoost)
Pull request description:
The minimum supported version of Python is 3.4 according to [dependencies.md](https://github.com/bitcoin/bitcoin/blob/master/doc/dependencies.md). This PR makes the Travis linter use this version in order to catch accidental use of modern syntax.
Tree-SHA512: 71b2c102be72b135a8ba049378d66875760f20a04a657102a399240c5c2b2ddbdfa7d5ab4c0c0242ecc3259e0ee8eb2273f331bc5eb824f4ae4c3cc58aea37ac
d6b3790d1a tests: check readability of cookie file (Chun Kuan Lee)
Pull request description:
This PR would wait until the `.cookie` file is readable
Possible fix no. 5 `PermissionError` in #14446
Tree-SHA512: e7055c7ca26a6eadbbe19e4eef08ffee61cd17de79b30af2f0d090f0ad81ca24815e3c7e034e5e30d47c580bb0b221b3955e9ff2fcec2274fbf7b9232ab0cdc7
28479f926f qa: Test bitcond shutdown (João Barbosa)
8d3f46ec39 http: Remove timeout to exit event loop (João Barbosa)
e98a9eede2 http: Remove unnecessary event_base_loopexit call (João Barbosa)
6b13580f4e http: Unlisten sockets after all workers quit (João Barbosa)
18e9685816 http: Send "Connection: close" header if shutdown is requested (João Barbosa)
02e1e4eff6 rpc: Add wait argument to stop (João Barbosa)
Pull request description:
Fixes#11777. Reverts #11006. Replaces #13501.
With this change the HTTP server will exit gracefully, meaning that all requests will finish processing and sending the response, even if this means to wait more than 2 seconds (current time allowed to exit the event loop).
Another small change is that connections are accepted even when the server is stopping, but HTTP requests are rejected. This can be improved later, especially if chunked replies are implemented.
Briefly, before this PR, this is the order or events when a request arrives (RPC `stop`):
1. `bufferevent_disable(..., EV_READ)`
2. `StartShutdown()`
3. `evhttp_del_accept_socket(...)`
4. `ThreadHTTP` terminates (event loop exits) because there are no active or pending events thanks to 1. and 3.
5. client doesn't get the response thanks to 4.
This can be verified by applying
```diff
// Event loop will exit after current HTTP requests have been handled, so
// this reply will get back to the client.
StartShutdown();
+ MilliSleep(2000);
return "Bitcoin server stopping";
}
```
and checking the log output:
```
Received a POST request for / from 127.0.0.1:62443
ThreadRPCServer method=stop user=__cookie__
Interrupting HTTP server
** Exited http event loop
Interrupting HTTP RPC server
Interrupting RPC
tor: Thread interrupt
Shutdown: In progress...
torcontrol thread exit
Stopping HTTP RPC server
addcon thread exit
opencon thread exit
Unregistering HTTP handler for / (exactmatch 1)
Unregistering HTTP handler for /wallet/ (exactmatch 0)
Stopping RPC
RPC stopped.
Stopping HTTP server
Waiting for HTTP worker threads to exit
msghand thread exit
net thread exit
... sleep 2 seconds ...
Waiting for HTTP event thread to exit
Stopped HTTP server
```
For this reason point 3. is moved right after all HTTP workers quit. In that moment HTTP replies are queued in the event loop which keeps spinning util all connections are closed. In order to trigger the server side close with keep alive connections (implicit in HTTP/1.1) the header `Connection: close` is sent if shutdown was requested. This can be tested by
```
bitcoind -regtest
nc localhost 18443
POST / HTTP/1.1
Authorization: Basic ...
Content-Type: application/json
Content-Length: 44
{"jsonrpc": "2.0","method":"stop","id":123}
```
Summing up, this PR:
- removes explicit event loop exit — event loop exits once there are no active or pending events
- changes the moment the listening sockets are removed — explained above
- sends header `Connection: close` on active requests when shutdown was requested which is relevant when it's a persistent connection (default in HTTP 1.1) — libevent is aware of this header and closes the connection gracefully
- removes event loop explicit break after 2 seconds timeout
Tree-SHA512: 4dac1e86abe388697c1e2dedbf31fb36a394cfafe5e64eadbf6ed01d829542785a8c3b91d1ab680d3f03f912d14fc87176428041141441d25dcb6c98a1e069d8
2012d4df2 Add CScriptNum decode python implementation in functional suite (Gregory Sanders)
Pull request description:
I needed this for reasons and thought it'd be good to upsteam it.
Tree-SHA512: 6ea89fa2a5f5a7759ba722f2b4ed5cd6423ebfff4e83ac8b8b5c935e6aa479684e626c5f41fa020816d2a9079a99af5564e30808594d5c13e3b51ec9b474926d
d20a9fa13d tests: add tests for invalid P2P messages (James O'Beirne)
62f94d39f8 tests: add P2PConnection.send_raw_message (James O'Beirne)
5aa31f6ef2 tests: add utility to assert node memory usage hasn't increased (James O'Beirne)
Pull request description:
- Adds `p2p_invalid_messages.py`: tests based on behavior for dealing with invalid and malformed P2P messages. Includes a test verifying that we can't DoS a node by spamming it with large invalid messages.
- Adds `TestNode.assert_memory_usage_stable`: a context manager that allows us to ensure memory usage doesn't significantly increase on a node during some test.
- Adds `P2PConnection.send_raw_message`: which allows us to construct and send messages with tweaked headers.
Tree-SHA512: 720a4894c1e6d8f1551b2ae710e5b06c9e4f281524623957cb01599be9afea82671dc26d6152281de0acb87720f0c53b61e2b27d40434d30e525dd9e31fa671f
Adds a utility to get resident set size memory usage for a test
node and a context manager that allows assertions based upon
maximum memory use increase.
This requires a small changes to a few tests, but means that
deterministic addresses will always be imported (unless setup_nodes
behaviour is explicitly overridden).
c11875c590 Add segwit address tests for importmulti (MeshCollider)
201451b1ca Make getaddressinfo return solvability (MeshCollider)
1753d217ea Add release notes for importmulti segwit change (MeshCollider)
353c064596 Fix typo in test_framework/blocktools (MeshCollider)
f6ed748cf0 Add SegWit support to importmulti with some ProcessImport cleanup (MeshCollider)
Pull request description:
Add support for segwit to importmulti, supports P2WSH, P2WPKH, P2SH-P2WPKH, P2SH-P2WSH. Adds a new `witnessscript` parameter which must be used for the witness scripts in the relevant situations.
Also includes some tests for the various import types.
~Also makes the change in #14019 redundant, but cherry-picks the test from that PR to test the behavior (@achow101).~
Fixes#12253, also addresses the second point in #12703, and fixes#14407
Tree-SHA512: 775a755c524d1c387a99acddd772f677d2073876b72403dcfb92c59f9b405ae13ceedcf4dbd2ee1d7a8db91c494f67ca137161032ee3a2071282eeb411be090a
If a node has not announced a tx at all, then it should respond to
getdata messages for that tx with notfound, to avoid leaking tx
origination privacy.
Adds a generate() method to the TestNode class in the test framework.
This method intercepts calls to generate, imports a dewterministic
private key to the node and then calls generatetoaddress to generate the
block to that address.
Note that repeated calls to importprivkey for the same private keys are
no-ops, so it's fine to call the generate() method many times.
faa4043c66 qa: Run more tests with wallet disabled (MarcoFalke)
Pull request description:
Instead of skipping the whole test, only skip the wallet specific section of a test if the wallet is not compiled in. This is mostly an indentation change, so can be reviewed with `--ignore-all-space`.
Tree-SHA512: 5941a8b6b00dca5cf9438c5f6f010ba812115188a69e427d7ade4c1ab8cfe7a57c73daf52c66235dbb24b1cd9ab7c7a17c49bc23d931e041b605d79116a71f66
a2a04a5abb Bugfix: Only run bitcoin-tx tests when bitcoin-tx is enabled (Luke Dashjr)
92af71cea9 configure: Make it possible to build only one of bitcoin-cli or bitcoin-tx (Luke Dashjr)
Pull request description:
Includes #5618 (which the reasons for rejecting no longer hold true)
Tree-SHA512: f30a8e4a2f70166b7cabef77c4674163b3a9da14c6a547d34f00d1056a19bf4d23e22851eea726fad2afc8735d5473ae91122c770b65ac3886663dc20e2c5b70
e460232876 Document fixed attribute behavior in critical test framework classes. (Justin Turner Arthur)
17b42f4122 Check for specific tx acceptance failures based on script signature (Justin Turner Arthur)
3a4449e9ad Strictly enforce instance attrs in critical functional test classes. (Justin Turner Arthur)
1d0ce94a54 Fix for incorrect version attr set on functional test segwit block. (Justin Turner Arthur)
ba923e32a0 test: Fix broken segwit test (practicalswift)
Pull request description:
No extra attributes will be able to be added to instances of the C++ class ports or of other critical classes without causing an exception. Helps prevent adding or depending on attributes that aren't in the intended object structure. It may prevent issues such as the one fixed in bitcoin/bitcoin#14300.
This request fixes the erroneous version attribute used in the p2p_segwit.py functional tests. This pull includes the commit from bitcoin/bitcoin#14300.
Tree-SHA512: 1b8c58e7aa0f71075ed5ff3e5be0a5182599108d8cd9bce682feac3b1842508124288e9335432b16a43f40f159c9710899e6d84af1b5868f48c947bc6f3e07ec
661ac15a4a appveyor: Run functional tests on appveyor (Chun Kuan Lee)
2148c36b6e tests: Make it possible to run functional tests on Windows (Chun Kuan Lee)
Pull request description:
This PR do the following things:
- Make functional tests compatible with Windows
- Print color output in functional tests for Windows 10
- Run util and functional tests on appveyor
- Do not run symlink tests on Windows
Note:
- The wallet_multiwallet.py fail is unrelated to the test framework, it's a bug related to c++ code or maybe dependencies. `bitcoind` would exit with 0xC0000005(Access violation) during shutdown occasionally. Disable this for now.
- Not using `--failfast` because this is still in experimental. We should track if there is any other error.
- Disable ZMQ tests because the python zmq library could cause access violation sometimes.
- Disable `feature_notifications` because Bitcoin Core handles the command in different thread, whicha can cause a race condition.
Tree-SHA512: b76db137d264e62a5c130e1cbca7a2ca002a7a0f4153fa0b92c1ea6c9c09ef0533e11c49bdbd566c472d8ff59f245758feb5e5a6ec6cb6bb66a1c67bab5fa48a
c1dde3a949 No longer shutdown after encrypting the wallet (Andrew Chow)
d7637c5a3f After encrypting the wallet, reload the database environment (Andrew Chow)
5d296ac810 Add function to close all Db's and reload the databae environment (Andrew Chow)
a769461d5e Move BerkeleyEnvironment deletion from internal method to callsite (Andrew Chow)
Pull request description:
This is the replacement for #11678 which implements @ryanofsky's [suggestion](https://github.com/bitcoin/bitcoin/pull/11678#pullrequestreview-76464511).
Shutting down the software was to prevent the BDB environment from writing unencrypted private keys to disk in the database log files, as was noted [here](https://bitcointalk.org/index.php?topic=51474.msg616068#msg616068). This PR replaces the shutdown behavior with a CDBEnv flush, close, and reopen which achieves the same effect: everything is cleanly flushed and closed, the log files are removed, and then the environment reopened to continue normal operation.
To ensure that no unencrypted private keys are in the log files after encrypting the wallet, I wrote [this script](https://gist.github.com/achow101/7f7143e6c3d3fdc034d3470e72823e9d) to pull private keys from the original wallet file and searches for these keys in the log files (note that you will have to change your file paths to make it work on your own machine).
As for concerns about private keys being written to slack space or being kept in memory, these behaviors no longer exist after the original wallet encryption PR and the shutting down solution from 2011.
cc @ryanofsky
Tree-SHA512: 34b894283b0677a873d06dee46dff8424dec85a2973009ac9b84bcf3d22d05f227c494168c395219d9aee3178e420cf70d4b3eeacc9785aa86b6015d25758e75
fa8433e379 qa: Remove unneded import_deterministic_coinbase_privkeys overwrite, add comments (MarcoFalke)
e413c2ddd1 qa: Fix codespell error and have lint-spelling error instead of warn (MarcoFalke)
Pull request description:
Currently the functional tests require the wallet module to be compiled into the Bitcoin Core executable. For example the premine (or datadir cache) to speed up tests when run in parallel would mine a bunch of blocks and store the private keys to sign the coinbase tx outputs in a wallet. There is no need to have the overhead of the whole wallet module by using keys that are deterministic for all runs.
Note that this change most likely requires the `./test/cache/` to be cleared.
Tree-SHA512: 9ce26036b0e10f0f888f66a1e50be6a357343f9ffb302ae24a7bb3df2f083a31702ef308b738a03b08a1b623aeddac5d6563dc1b15078c0357b7dafad7808ec3
