When importing a watch-only address over importmulti with a specific timestamp,
the wallet's nTimeFirstKey is currently set to 1. After this change, the
provided timestamp will be used and stored as metadata associated with
watch-only key. This can improve wallet performance because it can avoid the
need to scan the entire blockchain for watch only addresses when timestamps are
provided.
Also adds timestamp to validateaddress return value (needed for tests).
Fixes#9034.
Additionally, accept a "now" timestamp, to allow avoiding rescans for keys
which are known never to have been used.
Note that the behavior when "now" is specified is slightly different than the
previous behavior when no timestamp was specified at all. Previously, when no
timestamp was specified, it would avoid rescanning during the importmulti call,
but set the key's nCreateTime value to 1, which would not prevent future block
reads in later ScanForWalletTransactions calls. With this change, passing a
"now" timestamp will set the key's nCreateTime to the current block time
instead of 1.
Fixes#9491
Minimum boost version was bumped to 1.47.0 in #8920, which
means the configure step won't even pass with older boost.
This version has boost filesystem v3, which means the
(crappy) fallbacks for older versions can go.
Preserve comment, order form, and account strings from the original wallet
transaction. Also set fTimeReceivedIsTxTime and fFromMe fields for consistency
with CWallet::CreateTransaction. The latter two fields don't influence current
wallet behavior, but do record that the transaction originated in the wallet
instead of coming from the network or sendrawtransaction.
More accurate than simply adding one byte per input, and properly handles the
case where the original transaction happened to have very small signatures
4b189c1 Change bumpfee result value from 'oldfee' to 'origfee'. (Alex Morcos)
0c0c63f Introduce WALLET_INCREMENTAL_RELAY_FEE (Alex Morcos)
e8021ec Use CWallet::GetMinimumFee in bumpfee (Alex Morcos)
ae9719a Refactor GetMinimumFee to give option of providing targetFee (Alex Morcos)
fe8e8ef [rpc] Add incremental relay fee to getnetworkinfo (Alex Morcos)
6b331e6 Fix to have miner test aware of new separate block min tx fee (Alex Morcos)
de6400d Fix missing use of dustRelayFee (Alex Morcos)
5b15870 Use incrementalRelayFee for BIP 125 replacement (Alex Morcos)
The result value indicates the actual fee on the transaction that was replaced. But there is an error message which uses the description 'oldfee' to refer to the original fee rate applied to the new transaction's estimated max size. It was confusing that two different uses of 'oldfee' had two different numeric values.
Have wallet's default bump value be higher than the default incrementalRelayFee to future proof against changes to incremental relay fee. Only applies when not setting the fee rate directly.
Use the wallet's fee calculation logic to properly clamp fee against minimums and maximums when calculating the fee for a bumpfee transaction. Unless totalFee is explictly given, in which case, manually check against min, but do nothing to adjust given fee.
In all cases do a final check against maxTxFee (after adding any incremental amount).
7ba0a00 Testing: listsinceblock should not use orphan block height. (Karl-Johan Alm)
ee5c1ce Bug-fix: listsinceblock: use closest common ancestor when a block hash was provided for a chain that was not the main chain. (Karl-Johan Alm)
c9f3062 Add fundrawtransactions new reserveChangeKey option to the release notes (Jonas Schnelli)
9eb325d [QA] Add test for fundrawtransactions new reserveChangeKey option (Jonas Schnelli)
9aa4e6a [Wallet] Add an option to keep the change address key, true by default (Jonas Schnelli)
This command allows a user to increase the fee on a wallet transaction T, creating a "bumper" transaction B.
T must signal that it is BIP-125 replaceable.
T's change output is decremented to pay the additional fee. (B will not add inputs to T.)
T cannot have any descendant transactions.
Once B bumps T, neither T nor B's outputs can be spent until either T or (more likely) B is mined.
Includes code by @jonasschnelli and @ryanofsky
In spite of the name FindLatestBefore used std::lower_bound to try
to find the earliest block with a nTime greater or equal to the
the requested value. But lower_bound uses bisection and requires
the input to be ordered with respect to the comparison operation.
Block times are not well ordered.
I don't know what lower_bound is permitted to do when the data
is not sufficiently ordered, but it's probably not good.
(I could construct an implementation which would infinite loop...)
To resolve the issue this commit introduces a maximum-so-far to the
block indexes and searches that.
For clarity the function is renamed to reflect what it actually does.
An issue that remains is that there is no grace period in importmulti:
If a address is created at time T and a send is immediately broadcast
and included by a miner with a slow clock there may not yet have been
any block with at least time T.
The normal rescan has a grace period of 7200 seconds, but importmulti
does not.
4e7e2e1 Update RPC argument names (John Newbery)
481f289 rpc: Named argument support for bitcoin-cli (Wladimir J. van der Laan)
9adb4e1 rpc: Argument name consistency (Wladimir J. van der Laan)
8d713f7 rpc: Named arguments for rawtransaction calls (Wladimir J. van der Laan)
37a166f rpc: Named arguments for wallet calls (Wladimir J. van der Laan)
78b684f rpc: Named arguments for mining calls (Wladimir J. van der Laan)
b8ebc59 rpc: Named arguments for net calls (Wladimir J. van der Laan)
2ca9dcd test: Add test for RPC named arguments (Wladimir J. van der Laan)
fba1a61 rpc: Named arguments for misc calls (Wladimir J. van der Laan)
286ec08 rpc: Add 'echo' call for testing (Wladimir J. van der Laan)
495eb44 rpc: Named arguments for blockchain calls (Wladimir J. van der Laan)
6f1c76a rpc: Support named arguments (Wladimir J. van der Laan)
5865d41 authproxy: Add support for RPC named arguments (Wladimir J. van der Laan)
5113474 wallet: Use CDataStream.data() (Wladimir J. van der Laan)
e2300ff bench: Use CDataStream.data() (Wladimir J. van der Laan)
adff950 dbwrapper: Use new .data() method of CDataStream (Wladimir J. van der Laan)
a2141e4 streams: Remove special cases for ancient MSVC (Wladimir J. van der Laan)
af4c44c streams: Add data() method to CDataStream (Wladimir J. van der Laan)
On repeated calls to SelectCoins we try to meet the fee necessary for the last transaction, the new fee required might be smaller, so increase our change by the difference if we can.
Once we've picked coins and dummy-signed the transaction to calculate fee, if we don't have sufficient fee, then try to meet the fee by reducing change before resorting to picking new coins.
Performing signing in the inner loop has terrible performance
when many passes through are needed to complete the selection.
Signing before the algorithm is complete also gets in the way
of correctly setting the fee (e.g. preventing over-payment when
the fee required goes down on the final selection.)
Use of the dummy might overpay on the signatures by a couple bytes
in uncommon cases where the signatures' DER encoding is smaller
than the dummy: Who cares?
The meaning is clear from the context, and we're inconsistent here.
Also save typing when using named arguments.
- `bitcoinaddress` -> `address`
- `bitcoinprivkey` -> `privkey`
- `bitcoinpubkey` -> `pubkey`
Fee estimation can just check its own mapMemPoolTxs to determine the same information. Note that now fee estimation for block processing must happen before those transactions are removed, but this shoudl be a speedup.
5394b39 Wallet: Split main logic from InitLoadWallet into CreateWalletFromFile (Luke Dashjr)
fb0c934 Wallet: Let the interval-flushing thread figure out the filename (Luke Dashjr)
cee1612 reduce number of lookups in TransactionWithinChainLimit (Gregory Sanders)
af9bedb Test for fix of txn chaining in wallet (Gregory Sanders)
5882c09 CreateTransaction: Don't return success with too-many-ancestor txn (Gregory Sanders)
0b2294a SelectCoinsMinConf: Prefer coins with fewer ancestors (Gregory Sanders)
This change removes a mapValue.erase("version") statement which deletes a
mapValue entry that never existed. The statement was mistakenly added in commit
865c3a2383 in 2010 and is harmless but confusing.
This resolves an issue where a wallet transaction which failed to
relay previously because it couldn't make it into the mempool
will not try again until restart, even though mempool conditions
may have changed.
Abandoned and known-conflicted transactions are skipped.
Some concern was expressed that there may be users with many
unknown conflicts would waste a lot of CPU time trying to
add them to their memory pools over and over again. But I am
doubtful these users exist in any number, if they do exist
they have worse problems, and they can mitigate any performance
issue this might have by abandoning the transactions in question.
Remove the nType and nVersion as parameters to all serialization methods
and functions. There is only one place where it's read and has an impact
(in CAddress), and even there it does not impact any of the recursively
invoked serializers.
Instead, the few places that need nType or nVersion are changed to read
it directly from the stream object, through GetType() and GetVersion()
methods which are added to all stream classes.
444c673 bench: Add benchmark for lockedpool allocation/deallocation (Wladimir J. van der Laan)
6567999 rpc: Add `getmemoryinfo` call (Wladimir J. van der Laan)
4536148 support: Add LockedPool (Wladimir J. van der Laan)
f4d1fc2 wallet: Get rid of LockObject and UnlockObject calls in key.h (Wladimir J. van der Laan)
999e4c9 wallet: Change CCrypter to use vectors with secure allocator (Wladimir J. van der Laan)
Recent discussion (in IRC meetings, and e.g. #8989) has shown a
preference for the default confirm target for smartfees to be 6 instead
of 2, to avoid overpaying fees for questionable gain.
6 is also a compromise between the GUI's pre-#8989 value of 25 and the
bitcoind `-txconfirmtarget` default of 2. These were unified in #8989,
but this has made the (overly expensive) default of 2 as GUI default.
Change CCrypter to use vectors with secure allocator instead of buffers
on in the object itself which will end up on the stack. This avoids
having to call LockedPageManager to lock stack memory pages to prevent the
memory from being swapped to disk. This is wasteful.
There are only a few uses of `insecure_random` outside the tests.
This PR replaces uses of insecure_random (and its accompanying global
state) in the core code with an FastRandomContext that is automatically
seeded on creation.
This is meant to be used for inner loops. The FastRandomContext
can be in the outer scope, or the class itself, then rand32() is used
inside the loop. Useful e.g. for pushing addresses in CNode or the fee
rounding, or randomization for coin selection.
As a context is created per purpose, thus it gets rid of
cross-thread unprotected shared usage of a single set of globals, this
should also get rid of the potential race conditions.
- I'd say TxMempool::check is not called enough to warrant using a special
fast random context, this is switched to GetRand() (open for
discussion...)
- The use of `insecure_rand` in ConnectThroughProxy has been replaced by
an atomic integer counter. The only goal here is to have a different
credentials pair for each connection to go on a different Tor circuit,
it does not need to be random nor unpredictable.
- To avoid having a FastRandomContext on every CNode, the context is
passed into PushAddress as appropriate.
There remains an insecure_random for test usage in `test_random.h`.
2ca6b9d Remove last reference to CWalletDB from accounting_tests.cpp (Patrick Strateman)
02e2a81 Remove pwalletdb parameter from CWallet::AddAccountingEntry (Patrick Strateman)
d2e678d Add CWallet::ReorderTransactions and use in accounting_tests.cpp (Patrick Strateman)
59adc86 Add CWallet::ListAccountCreditDebit (Patrick Strateman)
86726d8 Rename `-optintofullrbf` option to `-walletrbf` (Wladimir J. van der Laan)
05fa823 wallet: Add BIP125 comment for MAXINT-1/-2 behavior (Wladimir J. van der Laan)
152f45b Add option to opt into full-RBF when sending funds (Peter Todd)
Remove the unused variable "blockTmp" in CMerkleTx::SetMerkleBranch. It
was previously used to read the block from disk if not provided as
argument, but is no longer needed.
9e9d644 net: fixup nits (Cory Fields)
8945384 net: Have LookupNumeric return a CService directly (Cory Fields)
21ba407 net: narrow include scope after moving to netaddress (Cory Fields)
21e5b96 net: move CNetAddr/CService/CSubNet out of netbase (Cory Fields)
1017b8a net: Add direct tests for new CSubNet constructors (Cory Fields)
b6c3ff3 net: Split resolving out of CSubNet (Cory Fields)
f96c7c4 net: Split resolving out of CService (Cory Fields)
31d6b1d net: Split resolving out of CNetAddr (Cory Fields)
Forward-ports two commits from 0.13:
- [0.13] Create a new HD seed after encrypting the wallet
- [Wallet] Add CKeyMetadata record for HDMasterKey(s), factor out HD key generation
Github-Pull: #8389
Rebased-From: f142c11ac634df487cc4bc65a5f1c9a3e3563dd9 de45c065f0648c4c41b57cb492420ceeed29dd11
7945088 [Wallet] comsetic non-code changes for the HD feature (Jonas Schnelli)
68d7682 [Wallet] ensure CKeyMetadata.hdMasterKeyID will be cleared during SetNull() (Jonas Schnelli)
f708085 [QA] extend wallet-hd test to cover HD metadata (Jonas Schnelli)
986c223 [Wallet] print hd masterkeyid in getwalletinfo (Jonas Schnelli)
b1c7b24 [Wallet] report optional HDKeypath/HDMasterKeyId in validateaddress (Jonas Schnelli)
5b95dd2 [Wallet] extend CKeyMetadata with HD keypath (Jonas Schnelli)
This reverts PR #4906, "Coinselection prunes extraneous inputs from
ApproximateBestSubset".
Apparently the previous behavior of slightly over-estimating the set of
inputs was useful in cleaning up UTXOs.
See also #7664, #7657, as well as 2016-07-01 discussion on #bitcoin-core-dev IRC.
Putting the build date in the executable is a practice that has no place
in these days, now that deterministic building is increasingly common.
Continues #7732 which did this for the GUI.
Also introduce UniValueType
UniValueType is a wrapper for UniValue::VType which allows setting
a typeAny flag. This flag indicates the type does not matter.
(Used by RPCTypeCheckObj)
