A numbered list is used when the sequence of steps matters. A bulleted list is used to denote a set of items where the sequence does not matter.
The workflow is a sequence and hence changed to a numbered list.
cabff7588 rpc: Make logging RPC public (Wladimir J. van der Laan)
Pull request description:
This started out as a developer hack but now it's useful enough for general use. Unhide the call by moving it to `control` category. This makes it documented in `help`.
Tree-SHA512: f45fa378558b552d4e2a110bf85100b0eaaa6180bb5f62cb54a251f66026d4625b670c69d85c281eebbf4b56b80b65618c51a5a593b8f9d0a04b31e95adc91f4
a9b6ba0b7 Add missing cs_main locks when calling blockToJSON/blockheaderToJSON (practicalswift)
Pull request description:
`blockToJSON(...)` and `blockheaderToJSON(...)` read the variable `chainActive` which requires holding the mutex `cs_main`. So does `GetDifficulty(...)`.
Tree-SHA512: bfb94f5e3238accbf6a4daddde49d53f1891c38ae9b07e25b3098c485747159258f64bb66a50e147b32beac601de89d9d04ff717b6c4f1460d329c90a53d3333
3ab545d7f addrman: Add missing lock in Clear() (CAddrMan) (practicalswift)
Pull request description:
Add missing lock in `Clear()` (`CAddrMan`).
The variable `vRandom` is guarded by the mutex `cs`.
**Note to reviewers:** Does this look correct? Should the lock cover the entire scope of the method, or should it be limited to cover only `std::vector<int>().swap(vRandom);`?
Tree-SHA512: 8833f31beaed1728fa55b13ddf9e0b8e24e395931497329be2440ce1c5113ff02871707d40830260adabd30c4ea86088f5da5cf8a821150c0d820f50a2ce386a
ff35de8 [ui] Add toggle for unblinding password fields (Thomas Snider)
Pull request description:
Proposed change for adding the ability to toggle password visibility in the password dialog. This is similar to functionality in most password managers and is specifically added with the use case of password managers in mind - the password in that case is likely pasted twice into both the new password and confirm password fields.
If this is a welcome change, I am open to suggestions on rearranging the layout.
Tree-SHA512: 1823f356f8f941cc584c44de264433e9a573cb8a358efa300a412c4458b5564d8d193969be40859195cf9c8d6768eee895ee22440d51db4f09175f9b4e28bced
This started out as a developer hack but now it's useful
enough for general use. Unhide the call by moving it to `control` category.
This makes it documented in `help`.
Commit 1.
This code was written by @TheBlueMatt in the following branch:
* https://github.com/TheBlueMatt/bitcoin/commits/2017-08-test-10923
This commit message was written by me (@practicalswift) who also squashed
@TheBlueMatt's commits into one and tried to summarize the changes made.
Commit 2.
Remove boost include. Remove boost mentions in comments.
223a4aa [build] Don't fail when passed --disable-lcov and lcov isn't available (fanquake)
Pull request description:
Fixes#10828
As pointed out in #10828, failing with "lcov not found" when we've been passed --disable-lcov doesn't make sense. Master currently behaves like this (where lcov isn't available):
```
./configure --disable-lcov
checking for pkg-config... /usr/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
configure: error: "lcov testing requested but lcov not found"
```
cc @janstary
Tree-SHA512: 606fdbddae67e72fff175f2f34e2c9af4e6972d40d5e1ec5c5d8be5051a728e5b16c35cfd856da0c0ce81dcab9db154a4937b1a6ca1e0233b6e160f2f4362002
Move to AppInitServers. This doesn't have any effects on bitcoin behavior. It
was just strange to have this unrelated code in the middle or parameter
interaction.
6262915 Add unit test for stale tip checking (Suhas Daftuar)
83df257 Add CConnmanTest to mutate g_connman in tests (João Barbosa)
ac7b37c Connect to an extra outbound peer if our tip is stale (Suhas Daftuar)
db32a65 Track tip update time and last new block announcement from each peer (Suhas Daftuar)
2d4327d net: Allow connecting to extra outbound peers (Suhas Daftuar)
Pull request description:
This is an alternative approach to #11534. Rather than disconnect an outbound peer when our tip looks stale, instead try to connect to an additional outbound peer.
Periodically, check to see if we have more outbound peers than we target (ie if any extra peers are in use), and if so, disconnect the one that least recently announced a new block (breaking ties by choosing the newest peer that we connected to).
Tree-SHA512: 8f19e910e0bb36867f81783e020af225f356451899adfc7ade1895d6d3bd5afe51c83759610dfd10c62090c4fe404efa0283b2f63fde0bd7da898a1aaa7fb281
97932cd rpc: further constrain the libevent workaround (Cory Fields)
6b58360 rpc: work-around an upstream libevent bug (Cory Fields)
Pull request description:
A rare race condition may trigger while awaiting the body of a message.
This may fix some reported rpc hangs/crashes.
This work-around mimics what libevent does internally once a write has started, which is what usually happens, but not always due to the processing happening on a different thread: e7ff4ef2b4/http.c (L373)
Fixed upstream at: 5ff8eb2637
Tree-SHA512: b9fa97cae9da2a44101c5faf1e3be0b9cbdf722982d35541cf224be31430779c75e519c8ed18d06ab7487bfb1211069b28f22739f126d6c28ca62d3f73b79a52
720d9e8fa [Wallet] always show help-line of wallet encryption calls (Jonas Schnelli)
Pull request description:
We do currently show/hide the wallet encryption RPC calls from the help if the current wallet.
In case of an encrypted wallet, `encryptwallet` is hidden and `walletpassphrasechange`, `walletpassphrasechange` and `walletlock` do appear in the help.
This is no longer ideal in case of multiwallet due to the fact that one may want help infos in order to target a specific wallet.
IMO its preferable to have a static help screen (show everything always). The currently show/hidden calls do handle the possible invalid encryption-state fine.
Fixes#11588
Tree-SHA512: 513fecd15248a31361f5143685e8cdeb63dfd3fa7120828917e1db54d936dc3db60d48ce46efa5c3a563a48157fe962689879856eeeed53f904686b12aec204e
If our tip hasn't updated in a while, that may be because our peers are
not relaying blocks to us that we would consider valid. Allow connection
to an additional outbound peer in that circumstance.
Also, periodically check to see if we are exceeding our target number of
outbound peers, and disconnect the one which has least recently
announced a new block to us (choosing the newest such peer in the case
of tie).
A rare race condition may trigger while awaiting the body of a message, see
upsteam commit 5ff8eb26371c4dc56f384b2de35bea2d87814779 for details.
This may fix some reported rpc hangs/crashes.
5d465e396 Ensure backupwallet fails when attempting to backup to source file (Tomas van der Wansem)
Pull request description:
Previous behaviour was to destroy the wallet (to zero-length)
This fixes#11375
Tree-SHA512: bfd1738659b15e3f23b6bbdf55ec12269c62c820bf701daec19500b52bd5845bb5516733c6f76f36197eb155182a8a35dc239ad4de2ef1e59bbb0f124a455759
f3d4adf Make p2p-acceptablock not an extended test (Matt Corallo)
00dcda6 [qa] test that invalid blocks on an invalid chain get a disconnect (Matt Corallo)
015a525 Reject headers building on invalid chains by tracking invalidity (Matt Corallo)
932f118 Accept unrequested blocks with work equal to our tip (Matt Corallo)
3d9c70c Stop always storing blocks from whitelisted peers (Matt Corallo)
3b4ac43 Rewrite p2p-acceptblock in preparation for slight behavior changes (Matt Corallo)
Pull request description:
@sdaftuar pointed out that the version in #11487 was somewhat DoS-able as someone could feed you a valid chain that forked off the the last checkpoint block and force you to do lots of work just walking backwards across blocks for each new block they gave you. We came up with a few proposals but settled on the one implemented here as likely the simplest without obvious DoS issues. It uses our existing on-load mapBlockIndex walk to make sure everything that descends from an invalid block is marked as such, and then simply caches blocks which we attempted to connect but which were found to be invalid. To avoid DoS issues during IBD, this will need to depend on #11458.
Includes tests from #11487.
Tree-SHA512: 46aff8332908e122dae72ceb5fe8cd241902c2281a87f58a5fb486bf69d46458d84a096fdcb5f3e8e07fbcf7466232b10c429f4d67855425f11b38ac0bf612e1
b296bf1 Init: Remove redundant exit(EXIT_FAILURE) instances and replace with return false (donaloconnor)
Pull request description:
While reviewing the bitcoin code I noticed that there are a few exit(EXIT_FAILURE) at various places in the AppInit function.
This function returns to main() which will return/exit with EXIT_FAILURE so returning false instead of an explicit exit(EXIT_FAILURE) seems to be cleaner.
This PR attempts to make things a bit more consistent.
There is a subtle difference between exit() and return from main in that the exit() will not clean up any local vars but I don't think this makes a difference in this case. Using exit() might even lead to bugs in the future where the dtor of local objects are expected to be called.
Tree-SHA512: 7d104c3a752b4e7d7bc2382ef7e62543462988f1bbf13dd4077fbeff5399729b76c71a4352556f188b8d306604232477466f5bb827b58a6f3f6273f2370e1faa
f927ee1 Fixed a couple small grammatical errors. (Christian Gentry)
Pull request description:
1. "If a pull request is not to be considered for merging (yet), please
prefix the ..."
2. If a particular commit references another issue, please add the reference. For
example: `refs #1234` or `fixes #4321`.
Tree-SHA512: b2ed11a235800a6b8e9450937352954a2222eb6f08f9556c8f298fd3d64d18e731397b46f3141eab01e0196f53fa3a9d84fb707a1e7691a63dd146b3c5298fe5
659b206 Make listsinceblock refuse unknown block hash (Russell Yanofsky)
Pull request description:
Change suggested by @theuni who noticed listsinceblock would ignore invalid block hashes causing it to return a completely unfiltered list of transactions.
Tree-SHA512: 3c8fb160265780d1334e856e853ab48e2e18372b8f1fc71ae480c3f45317048cc1fee0055d5c58031981a91b9c2bdbeb8e49a889d04ecba61729ce8109f2ce3f
60b98f8 [Util] Update tinyformat.h (fanquake)
Pull request description:
Updates `tinyformat.h` to commit c42f/tinyformat@689695c upstream. Including:
8a2812d8485d9e05a34748e2e48789
@achow101 mentioned that since upgrading to Ubuntu 17.10 (GCC 7), tinyformat had been throwing lots of -Wimplicit-fallthrough warnings. However fallthrough warnings should have been silenced by #10489. cc @theuni.
The upstream commit to fix fallthrough warnings is in this PR https://github.com/c42f/tinyformat/pull/39.
The last time tinyformat.h was updated in this repo was in #8274.
Tree-SHA512: a51bd30544693550e08148daf5d244e3a3a410caff7897351eb9cd28f661dc85e193e045bb86068ee4006b2f89a7233b7573b8c50d93d2a9a15a11386fdcc605
9d30f54 [Docs] Update OpenBSD Build Instructions for OpenBSD 6.2 (fanquake)
Pull request description:
This updates the OpenBSD build docs to reflect building [master](8ddf60db7a) on a OpenBSD 6.2 VM (using VirtualBox 5.1.28 r117968 on macOS 10.12.6).
Versions of installed packages were:
```
gmake 4.2.1
g++ 4.9.4
git 2.12.2
libevent 2.0.22
libtool 2.4.2
autoconf 2.69p2
automake 1.15p0
python 3.6.0
boost 1.58.0p3
llvm 4.0.0p2
```
The boost package installed via pkg_add now seems to work correctly. So we shouldn't require manual building + patching.
I also wasn't required to make adjustments to any resource limits.
Building with g++ and Clang was successful, using:
```
./configure --disable-wallet --with-gui=no CC=egcc CXX=eg++ CPP=ecpp
```
and
```
./configure --disable-wallet --with-gui=no CC=clang CXX=clang++
```
Running ``` make check ``` worked for ```test/test_bitcoin``` but ```test/util/bitcoin-util-test.py``` failed with:
```
Running test/util/bitcoin-util-test.py...
../test/util/bitcoin-util-test.py
env: python3: No such file or directory
```
So that seems like a configuration issue, Python 3.6 is installed.
Still todo:
- [ ] Check if a manual installation of Berkeley DB is required
- [x] Fix running ```test/util/bitcoin-util-test.py```
- [x] Have someone else verify building
cc @laanwj
Tree-SHA512: 34b176de4865b36dab9d66e74a15c37152e4b6c9784152c30dabbb515d6d9ae9cdbdc7a7b4d777876f91269a6a78cc277ec87775fc6c17dd509f7cf46e89a2b3
This tracks the set of all known invalid-themselves blocks (ie
blocks which we attempted to connect but which were found to be
invalid). This is used to cheaply check if new headers build on an
invalid chain.
While we're at it we also resolve an edge-case in invalidateblock
on pruned nodes which results in them needing a reindex if they
fail to reorg.
This is a simple change that makes our accept requirements the
same as our request requirements, (ever so slightly) further
decoupling our consensus logic from our FindNextBlocksToDownload
logic in net_processing.
There is no reason to wish to store blocks on disk always just
because a peer is whitelisted. This appears to be a historical
quirk to avoid breaking things when the accept limits were added.
Removes checking whitelisted behavior (which will be removed, the
difference in behavior here makes little sense) and no longer
requires that blocks at the same work as our tip be dropped if not
requested (in part because we *do* request those blocks).
2530bf2 net: Add missing lock in ProcessHeadersMessage(...) (practicalswift)
Pull request description:
Add missing lock in `ProcessHeadersMessage(...)`.
Reading the variable `mapBlockIndex` requires holding the mutex `cs_main`.
The new "Disconnect outbound peers relaying invalid headers" code added in commit 37886d5e2f and merged as part of #11568 two days ago did not lock `cs_main` prior to accessing `mapBlockIndex`.
Tree-SHA512: b799c234be8043d036183a00bc7867bbf3bd7ffe3baa94c88529da3b3cd0571c31ed11dadfaf29c5b8498341d6d0a3c928029a43b69f3267ef263682c91563a3
