Pass an error message back from CWallet::Verify(), and call
InitError/InitWarning from WalletInit::Verify().
This means that we can call CWallet::Verify() independently from
WalletInit and not have InitErrors printed to stdout. It also means that
the error can be reported to the user if dynamic wallet load fails.
This allows a single wallet to be verified. Prior to this commit, all
wallets were verified together by the WalletInit::Verify() function at
start-up.
Individual wallet verification will be done when loading wallets
dynamically at runtime.
WalletInit::Start calls postInitProcess() for each wallet. Previously
each call to postInitProcess() would attempt to schedule wallet
background flushing.
Just start wallet background flushing once from WalletInit::Start().
a8da482 Bump wallet version for pre split keypool (Andrew Chow)
dfcd9f3 Use a keypool of presplit keys after upgrading to hd chain split (Andrew Chow)
5c50e93 Allow -upgradewallet to upgradewallets to HD (Andrew Chow)
2bcf2b5 Test sethdseed (Andrew Chow)
b5ba01a Add 'sethdseed' RPC to initialize or replace HD seed (Chris Moore)
dd3c07a Separate HaveKey function that checks whether a key is in a keystore (Andrew Chow)
Pull request description:
Revival/rebase of #11085
Adds a new command `sethdseed` which allows you to either set or generate a new HD seed to be used. A new keypool can be generated or the original one kept and new keys added to the keypool will come from the new HD seed.
Wallets that are not HD will be upgraded to be version FEATURE_HD_SPLIT when the `sethdseed` RPC command is used.
I have also add some tests for this.
Additionally `-upgradewallet` can now be used to upgrade a wallet from non-HD to HD. When it is used for such an upgrade, the keypool will be regenerated.
Tree-SHA512: e56c792e150590429ac4a1061e8d6f7b20cca06366e184eb9bbade4cd6ae82699a28fe84f87031eadba97ad2c1606517a105f00fb7b45779c979243020071adb
Bump the wallet version to indicate support for the pre split keypool.
Also prevents any wallets from upgrading to versions between HD_SPLIT
and PRE_SPLIT_KEYPOOL.
After upgrading to HD chain split, we want to continue to use keys
from the old keypool. To do this, before we generate any new keys after
upgrading, we mark all of the keypool entries as being pre-chain
split and move them to a separate pre chain split keypool. Keys are
fetched from that keypool until it is emptied. Only then are the new
internal and external keypools used.
Changes the maximum upgradewallet version to the latest wallet version
number, 159900. Non-HD wallets will be upgraded to use HD derivation.
Non HD chain split wallets will be upgraded to HD chain split.
If a non-HD wallet is upgraded to HD, the keypool will be entirely
regenerated.
Since upgradewallet is effectively run during a first run, all of the
first run initial setup stuff is combined with the upgrade to HD
CWallet::ScanForWalletTransactions did not previously take into account
pindexStop when calculating progress.
Renamed progress vars to progress_*.
rescanblockchain is the only rpc that uses this parameter.
1e46d8a Get rid of ambiguous OutputType::NONE value (Russell Yanofsky)
Pull request description:
Based on suggestion by @sipa https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output type that couldn't be parsed, or to an automatic change output mode. This change drops the NONE enum and uses a simple bool to indicate parse failure, and a new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty string ("") address types instead of treating them like they were unset. This simplifies the parsing code a little bit and could prevent RPC usage mistakes. It's noted in the release notes.
Follows up #12408 by @MarcoFalke
Followups for future PRs:
- [ ] Add explicit support for specifying "auto" in `ParseOutputType` as suggested by promag and sipa: https://github.com/bitcoin/bitcoin/pull/12729#issuecomment-374799567 and https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969481
- [ ] Add wallet `AddressChangeType` method to complement `TransactionChangeType`: https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969618.
Tree-SHA512: 8b08b272bcb177a0a9e556dcd965840a7fe601ef83ca97938b879c9b1a33b5b3f96939e1bceef11ba7c644ac21bfd6c1dbc6ca715cd1da4ace50475240e4ee48
9cb6cdc Simplify semantics of ChainStateFlushed callback (Matt Corallo)
50b6533 scripted-diff: Rename SetBestChain callback ChainStateFlushed (Matt Corallo)
Pull request description:
Previously, ChainStateFlushed would fire either if a full flush
completed (which can happen due to memory limits, forced flush, or
on its own DATABASE_WRITE_INTERVAL timer) *or* on a
ChainStateFlushed-specific DATABASE_WRITE_INTERVAL timer. This is
both less clear for clients (as there are no guarantees about a
flush having actually happened prior to the call), and reults in
extra flushes not clearly intended by the code. We drop the second
case, providing a strong guarantee without removing the periodit
timer-based flushing.
This is a follow-up to discussion in #11857.
Tree-SHA512: 22ba3a0954d265d28413dbf87040790ca5b439820ee7bbadab14028295ec190de82ce5cd664426c82e58b706dc84278868026fa8d066702eb6e6962c9ace1f8e
This much more accurately captures the meaning of the callback.
-BEGIN VERIFY SCRIPT-
sed -i 's/SetBestChain/ChainStateFlushed/g' src/validationinterface.h src/validationinterface.cpp src/wallet/wallet.h src/wallet/wallet.cpp src/validation.cpp src/index/txindex.h src/index/txindex.cpp
-END VERIFY SCRIPT-
be67831 Make DummySignatureCreator a singleton (Pieter Wuille)
190b8d2 Make BaseSignatureCreator a pure interface (Pieter Wuille)
Pull request description:
* Removes the `m_provider` field from `BaseSignatureCreator`. Instead both a `SigningProvider` (which provides keys and scripts) and a `BaseSignatureCreator` (which implements the transaction-specific (or other) signing logic) are passed into and down in `ProduceSignature`, making the two concepts orthogonal.
* Makes `BaseSignatureCreator` a pure interface without constructor, making it easier to implement new derivations of it (for example for message signing).
* As `DummySignatureCreator` now becomes a stateless object, turn it into a singleton `DUMMY_SIGNATURE_CREATOR`.
Tree-SHA512: 5f1f4512e4ea7d02a31df7b9ede55008efa716c5b74a2630ca1c2fc6599584d8bf5f5641487266127f4b3788033803539fbd22b03ef1219c83c10da2d3da3dcd
cab0824 Logprint the start of a rescan (Jonas Schnelli)
Pull request description:
Right now, there is no log entry when a rescan starts which is confusing especially when a "still rescanning" log entry appears after the log-update timeout of 60s or when user manually aborts the rescan.
This PR adds a log entry when a rescan starts.
Tree-SHA512: 8712605af6fd60950bf3904cfb586da6022e44b3da6f3155fe4f02aae16df6044bc504b3d48945ea6d7fe768f0c6cb3282a2e2251d14bf3b7f1dcbd12568b05e
Add label API to wallet RPC.
This is one step towards #3816 ("Remove bolt-on account system") although it doesn't
actually remove anything yet.
These initially mirror the account functions, with the following differences:
- These functions aren't DEPRECATED in the help
- Help mentions 'label' instead of accounts. In the language used, labels are
associated with addresses, instead of addresses associated with labels. (unlike
with accounts.)
- Labels have no balance
- No balances in `listlabels`
- `listlabels` has no minconf or watchonly argument
- Like in the GUI, labels can be set on any address, not just receiving addreses
- Unlike accounts, labels can be deleted.
Being unable to delete them is a common annoyance (see #1231).
Currently only by reassigning all addresses using `setlabel`, but an explicit
call `deletelabel` which assigns all address to the default label may make
sense.
Thanks to Pierre Rochard for test fixes.
d207207 [logging] add lint-logs.sh to check for newline termination. (John Newbery)
5c21e6c [logging] Comment all continuing logs. (John Newbery)
Pull request description:
Check that all calls to LogPrintf() are terminated by a newline,
except those that are explicitly marked as 'continued' logs.
Tree-SHA512: fe5162b2b2df1e8a4c807da87584fa9af97a6b8377e4090fe0caa136d90bf29a487a123cde94569bdce7101fee3478196d99aa13f1212e24bfe5f41c773604fc
Most logs should terminated with a '\n'. Some logs
are built up over multiple calls to logPrintf(), so
do not need a newline terminater. Comment all of
these 'continued' logs as a linter hing.
Based on suggestion by Pieter Wuille <pieter.wuille@gmail.com> at
https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output
type that couldn't be parsed, or to an automatic change output mode. This
change drops the NONE enum and uses a simple bool indicate parse failure, and a
new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty
string ("") address types instead of treating them like they were unset. This
simplifies the parsing code a little bit and could prevent RPC usage mistakes.
It's noted in the release notes.
Log messages should terminate with a '\n', or the following log will be
written to the same line without a timestamp. Fix a couple of cases
where the message is not terminated with a \n.
1f45e21 scripted-diff: Convert 11 enums into scoped enums (C++11) (practicalswift)
Pull request description:
Rationale (from Bjarne Stroustrup's ["C++11 FAQ"](http://www.stroustrup.com/C++11FAQ.html#enum)):
>
> The enum classes ("new enums", "strong enums") address three problems with traditional C++ enumerations:
>
> * conventional enums implicitly convert to int, causing errors when someone does not want an enumeration to act as an integer.
> * conventional enums export their enumerators to the surrounding scope, causing name clashes.
> * the underlying type of an enum cannot be specified, causing confusion, compatibility problems, and makes forward declaration impossible.
>
> The new enums are "enum class" because they combine aspects of traditional enumerations (names values) with aspects of classes (scoped members and absence of conversions).
Tree-SHA512: 9656e1cf4c3cabd4378c7a38d0c2eaf79e4a54d204a3c5762330840e55ee7e141e188a3efb2b4daf0ef3110bbaff80d8b9253abf2a9b015cdc4d60b49ac2b914
2fb9c1e shuffle selected coins before transaction finalization (Gregory Sanders)
Pull request description:
Currently inputs are ordered based on COutPoint ordering, which while doesn't leak additional internal wallet state, likely further fingerprints the wallet as a Core wallet to observers.
Note: This slightly changed behavior of `fundrawtransaction` in that the newly-appended inputs will now be shuffled rather than in outpoint-order. This does not break API compatibility.
Simple shuffling of the coins being returned will hopefully allow the wallet to blend in a bit more, in lieu of additional data to find what other wallets are doing, or another standard, ala @gmaxwell's suggested of ordering via scriptPubKey.
Tree-SHA512: 70689a6eccf9fa7fc6e3d884f2eba4b482446a1e6128beff7a98f446d0c60f7966c5a6c55e9b0b3d73a9b539ce54889a26c7efe78ab7f34af386d5e4f3fa6df2
d2527bd Rename wallet_accounts.py test (Russell Yanofsky)
045eeb8 Rename account to label where appropriate (Russell Yanofsky)
Pull request description:
Rename account to label where appropriate
This change only updates strings and adds RPC aliases, but should simplify the implementation of address labels in https://github.com/bitcoin/bitcoin/pull/7729, by getting renaming out of the way and letting that change focus on semantics.
The difference between accounts and labels is that labels apply only to addresses, while accounts apply to both addresses and transactions (transactions have "from" and "to" accounts). The code associating accounts with transactions is clumsy and unreliable so we would like get rid of it.
---
There is a rebased version of #7729 atop this PR at https://github.com/ryanofsky/bitcoin/commits/pr/label, see https://github.com/bitcoin/bitcoin/pull/7729#issuecomment-338417139.
Tree-SHA512: b3f934e612922d6290f50137f8ba71ddfaea4485713c7d97e89400a8b73b09b254f9186dffa462c77f5847721f5af9852b5572ade5443d8ee95dd150b3edb7ff
081bf54 Test that BnB is not used when there are preset inputs (Andrew Chow)
6ef9982 Actually disable BnB when there are preset inputs (Andrew Chow)
Pull request description:
We don't want to use BnB when there are preset inputs because there
is some weirdness with making that work with using the KnapsackSolver
as the fallback. Currently we say that we haven't used bnb when
there are preset inputs, but we don't actually disable BnB. This fixes
that.
I thought this was done originally. I guess it got lost in a rebase somewhere.
Tree-SHA512: 9792c0cdd0736866bddbed20f10b8050104955dc589fba49a0bd61a582ba491c921af2cdcc2269678b7b69275dad5fcf89c71b75c28733c7bacbe52e55891b9c
4d9b4256d8 Fix typos (Dimitris Apostolou)
Pull request description:
Unfortunately I messed up my repo while trying to squash #12593 so I created a PR with just the correct fixes.
Tree-SHA512: 295d77b51bd2a9381f1802c263de7ffb2edd670d9647391e32f9a414705b3c8b483bb0e469a9b85ab6a70919ea13397fa8dfda2aea7a398b64b187f178fe6a06
This change only updates strings and adds RPC aliases, but should simplify the
implementation of address labels in
https://github.com/bitcoin/bitcoin/pull/7729, by getting renaming out of the
way and letting it focus on semantics.
The difference between accounts and labels is that labels apply only to
addresses, while accounts apply to both addresses and transactions
(transactions have "from" and "to" accounts). The code associating accounts
with transactions is clumsy and unreliable so we would like get rid of it.
We don't want to use BnB when there are preset inputs because there
is some weirdness with making that work with using the KnapsackSolver
as the fallback. Currently we say that we haven't used bnb when
there are preset inputs, but we don't actually disable BnB. This fixes
that.
73b5bf2cb Add a test to make sure that negative effective values are filtered (Andrew Chow)
76d2f068a Benchmark BnB in the worst case where it exhausts (Andrew Chow)
6a34ff533 Have SelectCoinsMinConf and SelectCoins use BnB or Knapsack and use it (Andrew Chow)
fab04887c Add a GetMinimumFeeRate function which is wrapped by GetMinimumFee (Andrew Chow)
cd927ff32 Move original knapsack solver tests to coinselector_tests.cpp (Andrew Chow)
fb716f7b2 Move current coin selection algorithm to coinselection.{cpp,h} (Andrew Chow)
4566ab75f Add tests for the Branch and Bound algorithm (Andrew Chow)
4b2716da4 Remove coinselection.h -> wallet.h circular dependency (Andrew Chow)
7d77eb1a5 Use a struct for output eligibility (Andrew Chow)
ce7435cf1 Move output eligibility to a separate function (Andrew Chow)
0185939be Implement Branch and Bound coin selection in a new file (Andrew Chow)
f84fed8eb Store effective value, fee, and long term fee in CInputCoin (Andrew Chow)
12ec29d3b Calculate and store the number of bytes required to spend an input (Andrew Chow)
Pull request description:
This is an implementation of the [Branch and Bound coin selection algorithm written by Murch](http://murch.one/wp-content/uploads/2016/11/erhardt2016coinselection.pdf) (@xekyo). I have it set so this algorithm will run first and if it fails, it will fall back to the current coin selection algorithm. The coin selection algorithms and tests have been refactored to separate files instead of having them all in wallet.cpp.
I have added some tests for the new algorithm and a test for all of coin selection in general. However, more tests may be needed, but I will need help with coming up with more test cases.
This PR uses some code borrowed from #10360 to use effective values when selecting coins.
Tree-SHA512: b0500f406bf671e74984fae78e2d0fbc5e321ddf4f06182c5855e9d1984c4ef2764c7586d03e16fa4b578c340b21710324926f9ca472d5447a0d1ed43eb4357e
b4bc32a451 [wallet] Get rid of CWalletTx default constructor (Russell Yanofsky)
a128bdc9e1 [wallet] Construct CWalletTx objects in CommitTransaction (Russell Yanofsky)
Pull request description:
Two commits:
- `Construct CWalletTx objects in CommitTransaction` moves a bunch of CWalletTx initialization into CWallet::CommitTransaction to dedup some code and avoid future inconsistencies in how wallet transactions are created.
- `Get rid of CWalletTx default constructor` does what is described and eliminates the possibility of empty transaction entries being inadvertently created by mapWallet[hash] accesses.
Both of these changes were originally part of #9381
Tree-SHA512: af3841c4f0539e0662d81b33c5369fc70aa06ddde1c59cb00fb21c9e4c7d9ff47f1edc5040cb463af1333838802c56b3ef875b939e2b804ee45b8e0294a4371c
92fabcd44 Add LookupBlockIndex function (João Barbosa)
43a32b739 Add missing cs_lock in CreateWalletFromFile (João Barbosa)
f814a3e8f Fix cs_main lock in LoadExternalBlockFile (João Barbosa)
c651df8b3 Lock cs_main while loading block index in AppInitMain (João Barbosa)
02de6a6bc Assert cs_main is held when accessing mapBlockIndex (João Barbosa)
Pull request description:
Replace all `mapBlockIndex` lookups with the new `LookupBlockIndex()`. In some cases it avoids a second lookup.
Tree-SHA512: ca31118f028a19721f2191d86f2dd398144d04df345694575a64aeb293be2f85785201480c3c578a0ec99690516205708558c0fd4168b09313378fd4e60a8412
