e306be7429 Use 72 byte dummy signatures when watching only inputs may be used (Andrew Chow)
48b1473c89 Use 71 byte signature for DUMMY_SIGNATURE_CREATOR (Andrew Chow)
18dfea0dd0 Always create 70 byte signatures with low R values (Andrew Chow)
Pull request description:
When creating signatures for transactions, always make one which has a 32 byte or smaller R and 32 byte or smaller S value. This results in signatures that are always less than 71 bytes (32 byte R + 32 byte S + 6 bytes DER + 1 byte sighash) with low R values. In most cases, the signature will be 71 bytes.
Because R is not mutable in the same way that S is, a low R value can only be found by trying different nonces. RFC 6979 for deterministic nonce generation has the option to specify additional entropy, so we simply use that and add a uin32_t counter which we increment in order to try different nonces. Nonces are sill deterministically generated as the nonce used will the be the first one where the counter results in a nonce that results in a low R value. Because different nonces need to be tried, time to produce a signature does increase. On average, it takes twice as long to make a signature as two signatures need to be created, on average, to find one with a low R.
Having a fixed size signature makes size calculations easier and also saves half a byte of transaction size, on average.
DUMMY_SIGNATURE_CREATOR has been modified to produce 71 byte dummy signatures instead of 72 byte signatures.
Tree-SHA512: 3cd791505126ce92da7c631856a97ba0b59e87d9c132feff6e0eef1dc47768e81fbb38bfbe970371bedf9714b7f61a13a5fe9f30f962c81734092a4d19a4ef33
18f690ec2f wallet: shuffle coins before grouping, where warranted (Karl-Johan Alm)
Pull request description:
Coins are randomly shuffled in coin selection to avoid unintentional privacy leaks regarding the user's coin set. For the case where a user has a lot of coins with the same destination, these will be grouped into groups of 10 *before* the shuffling.
It is unclear whether this has any implications at all, but this PR plugs the potential issue, if there ever is one, by shuffling the coins before they are grouped.
Issue brought up in https://github.com/bitcoin/bitcoin/pull/12257#discussion_r204554549
Tree-SHA512: fb50ed4b5fc03ab4853d45b76e1c64476ad5bcd797497179bc37b9262885c974ed6811159fd8e581f1461b6cc6d0a66146f4b70a2777c0f5e818d1322e0edb89
bb5b1c0b2d [Docs] upgrade rescan time warning from minutes to >1 hour (Mason Simon)
Pull request description:
When I rescanned just now it took well over an hour. The time warning "may take minutes" didn't prepare me for that.
```
2018-08-08T03:10:17Z [wallet] Still rescanning. At block 174747. Progress=0.008341
2018-08-08T03:11:17Z [wallet] Still rescanning. At block 204233. Progress=0.024533
2018-08-08T03:12:17Z [wallet] Still rescanning. At block 221170. Progress=0.038340
...
2018-08-08T04:16:17Z [wallet] Still rescanning. At block 524815. Progress=0.957105
2018-08-08T04:17:17Z [wallet] Still rescanning. At block 528572. Progress=0.971323
2018-08-08T04:18:17Z [wallet] Still rescanning. At block 532458. Progress=0.986824
```
This is on a 4-core 4ghz system with a 7200rpm drive.
Tree-SHA512: 722ccf566bfd6a3381fa173e08849cb676fe4c1f1cb2c4b86b07df2a5dc1ca0d54797cbe8fd606cdc2c60fef2be7c98e052460decdac2132ba759cff822132e8
With watching only inputs, we do not know how large the signatures
for those inputs will be as their signers may not have implemented
71 byte signatures. Thus we estimate their fees using the 72 byte
dummy signature to ensure that we pay enough fees.
This only effects fundrawtransaction when includeWatching is true.
3fc20632a3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28 Regenerate manpages (DrahtBot)
eb7daf4d60 Update copyright headers to 2018 (DrahtBot)
Pull request description:
Some trivial maintenance to avoid having to do it again after the 0.17 branch off.
(The scripts to do this are in `./contrib/`)
Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa
23fbbb100f wallet: sum ancestors rather than taking max in output groups (Karl-Johan Alm)
Pull request description:
This is pointed out in https://github.com/bitcoin/bitcoin/pull/12257#discussion_r204549758.
Basically, the ancestors gives an indication as to how many ancestors the resulting transaction will have, which is more precise when summing up the values, rather than taking the maximum, since all the coins in the group will become ancestors if selected.
Tree-SHA512: 0588c4b6059669650614817e041526a2ab89dda8c07fca8e077c7669dca1fed51cd164f7df56340840ab60285d48f3b140dcee64f64bf696b2dd4ab16d556a13
93de2891fa wallet: assert to ensure accuracy of CMerkleTx::GetBlocksToMaturity (Ben Woosley)
Pull request description:
According to my understanding, it should not be possible for coinbase
transactions to be conflicting, thus it should not be possible for
GetDepthInMainChain to return a negative result. If it did, this would
also result in innacurate results for GetBlocksToMaturity due to the
math therein. asserting ensures accuracy.
Tree-SHA512: 8e71c26f09fe457cfb00c362ca27066f7f018ea2af1f395090fdc7fd9f5964b76f4317c23f7a4923776f00087558511da5c1c368095be39fb1bacc614a93c32f
a1a998cf24 wallet: Fix backupwallet for multiwallets (Daniel Kraft)
Pull request description:
`backupwallet` was broken for multiwallets in their own directories (i.e. something like `DATADIR/wallets/mywallet/wallet.dat`). In this case, the backup would use `DATADIR/wallets/wallet.dat` as source file and not take the specific wallet's directory into account.
This led to either an error during the backup (if the wrong source file was not present) or would silently back up the wrong wallet; especially the latter behaviour can be quite bad for users.
Tree-SHA512: 7efe2450ca047e40719fcc7cc211ed94699056020ac737cada7b59e8240298675960570c45079add424d0aab520437d5050d956acd695a9c2452dd4317b4d2c4
a13647b8bd [qa] Add test for too-large wallet output groups (Suhas Daftuar)
57ec1c97b2 [wallet] correctly limit output group size (Suhas Daftuar)
Pull request description:
Also add a test to ensure that output groups are being limited, even if a wallet has many outputs corresponding to the same scriptPubKey (the test fails without the first commit).
Tree-SHA512: 2aaa82005b0910488f5cbf40690d4c5e2f46949e299ef70b4cb6e440713811443d411dcbc6d71b1701fd82423073125e21747787d70830cd021c841afb732d51
3fe836b78d [moveonly] Extract RescanWallet to handle a simple rescan (Ben Woosley)
Pull request description:
Where the outcome does not depend on the result, apart from a simple
success check.
Tree-SHA512: e0d29c6fc0c7f99a730289e5a80deb586b2848aead56b5198a71ef01f65374812468dfd57be0b8b076eb9be4090d5101d28d979a1d5c3d2f1caeca77b303e90e
e3245f2e7b Removes Boost predicate.hpp dependency (251)
Pull request description:
This pull request removes the `boost/algorithm/string/predicate.hpp` dependency from the project.
To replace the the `predicate.hpp` dependency from the project the function calls to `boost::algorithm::starts_with` and `boost::algorithm::ends_with` have been replaced with respectively C++11's `std::basic_string::front` and `std::basic_string::back` function calls.
Refactors that were not required, but have been done anyways:
- The Boost function `all` was implicitly made available via the `predicate.hpp` header. Instead of including the appropriate header, function calls to `all` have been replaced with function calls to `std::all_of`.
- The `boost::algorithm::is_digit` predicate has been replaced with a custom `IsDigit` function that is locale independent and ASCII deterministic.
Tree-SHA512: 22dda6adfb4d7ac0cabac8cc33e8fb8330c899805acc1ae4ede402c4b11ea75a399414b389dfaa3650d23b47f41351b4650077af9005d598fbe48d5277bdc320
232f96f5c8 doc: Add release notes for -avoidpartialspends (Karl-Johan Alm)
e00b4699cc clean-up: Remove no longer used ivars from CInputCoin (Karl-Johan Alm)
43e04d13b1 wallet: Remove deprecated OutputEligibleForSpending (Karl-Johan Alm)
0128121101 test: Add basic testing for wallet groups (Karl-Johan Alm)
59d6f7b4e2 wallet: Switch to using output groups instead of coins in coin selection (Karl-Johan Alm)
87ebce25d6 wallet: Add output grouping (Karl-Johan Alm)
bb629cb9dc Add -avoidpartialspends and m_avoid_partial_spends (Karl-Johan Alm)
65b3eda458 wallet: Add input bytes to CInputCoin (Karl-Johan Alm)
a443d7a0ca moveonly: CoinElegibilityFilter into coinselection.h (Karl-Johan Alm)
173e18a289 utils: Add insert() convenience templates (Karl-Johan Alm)
Pull request description:
This PR adds an optional (off by default) `-avoidpartialspends` flag, which changes coin select to use output groups rather than outputs, where each output group corresponds to all outputs with the same destination.
It is a privacy improvement, as each time you spend some output, any other output that is publicly associated with the destination (address) will also be spent at the same time, at the cost of fee increase for cases where coin select without group restriction would find a more optimal set of coins (see example below).
For regular use without address reuse, this PR should have no effect on the user experience whatsoever; it only affects users who, for some reason, have multiple outputs with the same destination (i.e. address reuse).
Nodes with this turned off will still try to avoid partial spending, if the fee of the resulting transaction is not greater than the fee of the original transaction.
Example: a node has four outputs linked to two addresses `A` and `B`:
* 1.0 btc to `A`
* 0.5 btc to `A`
* 1.0 btc to `B`
* 0.5 btc to `B`
The node sends 0.2 btc to `C`. Without `-avoidpartialspends`, the following coin selection will occur:
* 0.5 btc to `A` or `B` is picked
* 0.2 btc is output to `C`
* 0.3 - fee is output to (unique change address)
With `-avoidpartialspends`, the following will instead happen:
* Both of (0.5, 1.0) btc to `A` or `B` is picked (one or the other pair)
* 0.2 btc is output to `C`
* 1.3 - fee is output to (unique change address)
As noted, the pro here is that, assuming nobody sends to the address after you spend from it, you will only ever use one address once. The con is that the transaction becomes slightly larger in this case, because it is overpicking outputs to adhere to the no partial spending rule.
This complements #10386, in particular it addresses @luke-jr and @gmaxwell's concerns in https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-300667926 and https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-302361381.
Together with `-avoidreuse`, this fully addresses the concerns in #10065 I believe.
Tree-SHA512: 24687a4490ba59cf4198ed90052944ff4996653a4257833bb52ed24d058b3e924800c9b3790aeb6be6385b653b49e304453e5d7ff960e64c682fc23bfc447621
This is a squashed commit that squashes the following commits:
This commit removes the `boost/algorithm/string/predicate.hpp` dependenc
from the project by replacing the function calls to `boost::algorithm::starts_with`
`boost::algorithm::ends_with` and `all` with respectively C++11'
`std::basic_string::front`, `std::basic_string::back`, `std::all_of` function calls
This commit replaces `boost::algorithm::is_digit` with a locale independent isdigi
function, because the use of the standard library's `isdigit` and `std::isdigit
functions is discoraged in the developer notes
a3fa4d6a6a QA: Fix bug in -usecli logic that converts booleans to non-lowercase strings (Jonas Schnelli)
4704e5f074 [QA] add createwallet disableprivatekey test (Jonas Schnelli)
c7b8f343e9 [Qt] Disable creating receive addresses when private keys are disabled (Jonas Schnelli)
2f15c2bc20 Add disable privatekeys option to createwallet (Jonas Schnelli)
cebefba085 Add option to disable private keys during internal wallet creation (Jonas Schnelli)
9995a602a6 Add facility to store wallet flags (64 bits) (Jonas Schnelli)
Pull request description:
This mode ('createwallet {"disableprivatekeys": true}') is intended for a sane pure watch-only mode, ideal for a use-case where one likes to use Bitcoin-Core in conjunction with a hardware-wallet or another solutions for cold-storage.
Since we have support for custom change addresses in `fundrawtransaction`, pure watch-only wallets including coin-selection are possible and do make sense for some use cases.
This new mode disables all forms of private key generation and ensure that no mix between hot and cold keys are possible.
Tree-SHA512: 3ebe7e8d54c4d4e5f790c348d4c292d456f573960a5b04d69ca5ef43a9217c7e7671761c6968cdc56f9a8bc235f3badd358576651af9f10855a0eb731f3fc508
27ee53c1ae wallet: Add error handling. Check return value of ParseUInt32(...) in ParseHDKeypath(...). (practicalswift)
7223263899 wallet: Add tests for ParseHDKeypath(...) (practicalswift)
Pull request description:
Add error handling. Check return value of `ParseUInt32(...)` in `ParseHDKeypath(...)`.
`ParseUInt32(...)` returns `false` if the entire string could not be parsed or when an overflow or underflow occurred. In such case the uninitialized variable `number` would be used in the calculation of `path` (prior to this commit).
An example key path triggering this is `m/0/4294967296`:
```
ParseHDKeypath("m/0/4294967296", keypath);
```
`4294967296` is `1` + `0xFFFFFFFF` (`uint32_t` max: `4294967295`).
Introduced in a4b06fb42e which was merged into `master` 14 hours ago as part of #13557 ("BIP 174 PSBT Serializations and RPCs").
Tree-SHA512: e5ff423f67c18d82c1231bde6343587a453e793c32004d93dc9b61be6d9372b57a6b2c9978d9eb1000d6cc82fd180f2486013f928dca737fb92daad22c16e467
2c71edc2fc [wallet] [rpc] Fix importaddress help text (John Newbery)
Pull request description:
Help text for `importaddress` referred to the first parameter as `script`, when in fact it's `address`. Calling with a script argument fails:
```
→ bcli -named importaddress script=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
error code: -8
error message:
Unknown named parameter script
→ bcli -named importaddress address=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
# success!
```
Tree-SHA512: 24dcb2cbd0a43e25896b1c67fa0386df2453ec04d49a339e10992417b3921ce3df8a6aa5abba7d2237d6188b018948b2a21ea2f04d37120ad36c31c7b7fc9f1c
cd3f4aa808 Decouple wallet version from client version (Andrew Chow)
Pull request description:
Instead of comparing version numbers in the wallet to the client version number, compare them to the latest supported wallet version in the client. This allows for wallet version numbers to be unrelated to the client version number.
Tree-SHA512: 69c3e1f45a40bde01d622d504a803fea32fc14e2e27b14b0729725349d8592d56ebca26fd06f117fd6f5164fb4ce980122751b6370f6e25f1a947dbdf4143ddd
020628e3a4 Tests for PSBT (Andrew Chow)
a4b06fb42e Create wallet RPCs for PSBT (Andrew Chow)
c27fe419ef Create utility RPCs for PSBT (Andrew Chow)
8b5ef27937 SignPSBTInput wrapper function (Andrew Chow)
58a8e28918 Refactor transaction creation and transaction funding logic (Andrew Chow)
e9d86a43ad Methods for interacting with PSBT structs (Andrew Chow)
12bcc64f27 Add pubkeys and whether input was witness to SignatureData (Andrew Chow)
41c607f09b Implement PSBT Structures and un/serialization methods per BIP 174 (Andrew Chow)
Pull request description:
This Pull Request fully implements the [updated](https://github.com/bitcoin/bips/pull/694) BIP 174 specification. It is based upon #13425 which implements the majority of the signing logic.
BIP 174 specifies a binary transaction format which contains the information necessary for a signer to produce signatures for the transaction and holds the signatures for an input while the input does not have a complete set of signatures.
This PR contains structs for PSBT, serialization, and deserialzation code. Some changes to `SignatureData` have been made to support detection of UTXO type and storing public keys.
***
Many RPCs have been added to handle PSBTs.
`walletprocesspsbt` takes a PSBT format transaction, updates the PSBT with any inputs related to this wallet, signs, and finalizes the transaction. There is also an option to not sign and just update.
`walletcreatefundedpsbt` creates a PSBT from user provided data in the same form as createrawtransaction. It also funds the transaction and takes an options argument in the same form as `fundrawtransaction`. The resulting PSBT is blank with no input or output data filled in. It is analogous to a combination of `createrawtransaction` and `fundrawtransaction`
`decodepsbt` takes a PSBT and decodes it to JSON. It is analogous to `decoderawtransaction`
`combinepsbt` takes multiple PSBTs for the same tx and combines them. It is analogous to `combinerawtransaction`
`finalizepsbt` takes a PSBT and finalizes the inputs. If all inputs are final, it extracts the network serialized transaction and returns that instead of a PSBT unless instructed otherwise.
`createpsbt` is like `createrawtransaction` but for PSBTs instead of raw transactions.
`convertpsbt` takes a network serialized transaction and converts it into a psbt. The resulting psbt will lose all signature data and an explicit flag must be set to allow transactions with signature data to be converted.
***
This supersedes #12136
Tree-SHA512: 1ac7a79e5bc669933f0a6fcc93ded55263fdde9e8c144a30266b13ef9f62aacf43edd4cbca1ffbe003090b067e9643c9298c79be69d7c1b10231b32acafb6338
