680bc2cbb Use range-based for loops (C++11) when looping over map elements (practicalswift)
Pull request description:
Before this commit:
```c++
for (std::map<T1, T2>::iterator x = y.begin(); x != y.end(); ++x) {
T1 z = (*x).first;
…
}
```
After this commit:
```c++
for (auto& x : y) {
T1 z = x.first;
…
}
```
Tree-SHA512: 954b136b7f5e6df09f39248a6b530fd9baa9ab59d7c2c7eb369fd4afbb591b7a52c92ee25f87f1745f47b41d6828b7abfd395b43daf84a55b4e6a3d45015e3a0
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
1789e4675 Force explicit double -> int conversion for CFeeRate constructor (Matt Corallo)
53a6590f4 Make float <-> int casts explicit outside of test, qt, CFeeRate (Matt Corallo)
0b1b9148c Remove countMaskInv caching in bench framework (Matt Corallo)
Pull request description:
This fixes an issue where estimatesmartfee which matches at the min relay fee will return 999 sat/byte instead of 1000 sat/byte due to a float rounding issue. I went ahead and made all float <-> int conversion outside of test/qt explicit (test only had one or two more, Qt had quite a few, including many in the Qt headers themselves) and added overloads to CFeeRate to force callers to do an explicit round themselves. Easy to test with -Wfloat-conversion.
Tree-SHA512: 66087b08e5dfca67506da54ae057c2f9d86184415e8fa4fa0199e38839e06a3ce96c836fcb7593b7d960065f5240c594ff3a0cfa14333ac528421f5aeac835c9
This contains most of the changes of 10563 "remove safe mode", but doesn't
remove the safe mode yet, but put an `ObserveSafeMode()` check in
individual calls with okSafeMode=false.
This cleans up the ugly "okSafeMode" flag from the dispatch tables,
which is not a concern for the RPC server.
Extra-author: Wladimir J. van der Laan <laanwj@gmail.com>
This changes RPC methods to treat null arguments the same as missing arguments,
instead of throwing type errors. Specifically:
- `getbalance` method now returns the wallet balance when the `account` param
is null instead of throwing a type error (same as when parameter is missing).
It is still an error to supply `minconf` or `watchonly` options when the
account is null.
- `addnode` and `setban` methods now return help text instead of type errors if
`command` params are null (same as when params are missing).
- `sendrawtransaction`, `setaccount`, `movecmd`, `sendfrom`,
`addmultisigaddress`, `listaccounts`, `lockunspent` methods accept null
default values where missing values were previously allowed, and treat them
the same.
90d4d89 scripted-diff: Use the C++11 keyword nullptr to denote the pointer literal instead of the macro NULL (practicalswift)
Pull request description:
Since C++11 the macro `NULL` may be:
* an integer literal with value zero, or
* a prvalue of type `std::nullptr_t`
By using the C++11 keyword `nullptr` we are guaranteed a prvalue of type `std::nullptr_t`.
For a more thorough discussion, see "A name for the null pointer: nullptr" (Sutter &
Stroustrup), http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
With this patch applied there are no `NULL` macro usages left in the repo:
```
$ git grep NULL -- "*.cpp" "*.h" | egrep -v '(/univalue/|/secp256k1/|/leveldb/|_NULL|NULLDUMMY|torcontrol.*NULL|NULL cert)' | wc -l
0
```
The road towards `nullptr` (C++11) is split into two PRs:
* `NULL` → `nullptr` is handled in PR #10483 (scripted, this PR)
* `0` → `nullptr` is handled in PR #10645 (manual)
Tree-SHA512: 3c395d66f2ad724a8e6fed74b93634de8bfc0c0eafac94e64e5194c939499fefd6e68f047de3083ad0b4eff37df9a8a3a76349aa17d55eabbd8e0412f140a297
This is necessary because core_write has to write amounts in
TxToUniv, and mistakingly uses FormatMoney for that
(which is only for debugging).
We don't move AmountFromValue at the same time, as
this is more challenging due to the RPCError depencency
there.
4dc1915 check for null values in rpc args and handle appropriately (Gregory Sanders)
999ef20 importmulti options are optional (Gregory Sanders)
a70d025 fixup some rpc param counting for rpc help (Gregory Sanders)
Pull request description:
Audited where named args will fail to use correct default values or may fail when additional optional arguments are added.
Previously for these parameters, it was fine to omit them as positional arguments, but it would trigger UniValue runtime errors to set them to null, or to omit them while passing named parameters with greater positions (which would internally set earlier missing arguments to null). Now null values are treated the same as missing values so these errors do not occur.
Included a few other small fixes while working on it.
I didn't bother fixing account-based rpc calls.
Tree-SHA512: 8baf781a35bd48de7878d4726850a580dab80323d3416c1c146b4fa9062f8a233c03f37e8ae3f3159e9d04a8f39c326627ca64c14e1cb7ce72538f934ab2ae1e
c1be285 chainparams: make supported service bits option explicit (Cory Fields)
d5c7c1c net: use an internal address for fixed seeds (Cory Fields)
6cdc488 net: switch to dummy internal ip for dns seed source (Cory Fields)
6d0bd5b net: do not allow resolving to an internal address (Cory Fields)
7f31762 net: add an internal subnet for representing unresolved hostnames (Cory Fields)
Tree-SHA512: 9bf1042bef546ac3ef0e0d3a9a5555eb21628ff2674a0cf8c6367194b22bfdab477adf452c0e7c56f44e0fb37debc5e14bdb623452e076fb9c492c7702601d7a
A few "a->an" and "an->a".
"Shows, if the supplied default SOCKS5 proxy" -> "Shows if the supplied default SOCKS5 proxy". Change made on 3 occurrences.
"without fully understanding the ramification of a command" -> "without fully understanding the ramifications of a command".
Removed duplicate words such as "the the".
We currently do two resolves for dns seeds: one for the results, and one to
serve in addrman as the source for those addresses.
There's no requirement that the source hostname resolves to the stored
identifier, only that the mapping is unique. So rather than incurring the
second lookup, combine a private subnet with a hash of the hostname.
The resulting v6 ip is guaranteed not to be publicy routable, and has only a
negligible chance of colliding with a user's internal network (which would be
of no consequence anyway).
This adds the listening address on which incoming connections were received to the
CNode and CNodeStats structures.
The address is reported in `getpeerinfo`.
This can be useful for distinguishing connections received on different listening ports
(e.g. when using a different listening port for Tor hidden service connections)
or different networks.
disconnectnode() can currently only be called with the IP address/port
of the node the user wishes to connect. This commit allows the node to
be disconnected using the nodeid returned by getpeerinfo().
The setban() RPC was returning misleading or incorrect error
codes (for example RPC_CLIENT_NODE_ALREADY_ADDED when an invalid IP
address was entered). This commit fixes those error codes:
- RPC_CLIENT_INVALID_IP_OR_SUBNET should be returned if the client
enters an invalid IP address or subnet.
This commit also updates the test cases to explicitly test the error code.
This commit also adds a testcase for trying to setban on an invalid subnet.
Remove -limitfreerelay and always enforce minRelayTxFee in the mempool (except from disconnected blocks)
Remove -relaypriority, the option was only used for the ability to allow free transactions to be relayed regardless of their priority. Both notions no longer apply.
4b189c1 Change bumpfee result value from 'oldfee' to 'origfee'. (Alex Morcos)
0c0c63f Introduce WALLET_INCREMENTAL_RELAY_FEE (Alex Morcos)
e8021ec Use CWallet::GetMinimumFee in bumpfee (Alex Morcos)
ae9719a Refactor GetMinimumFee to give option of providing targetFee (Alex Morcos)
fe8e8ef [rpc] Add incremental relay fee to getnetworkinfo (Alex Morcos)
6b331e6 Fix to have miner test aware of new separate block min tx fee (Alex Morcos)
de6400d Fix missing use of dustRelayFee (Alex Morcos)
5b15870 Use incrementalRelayFee for BIP 125 replacement (Alex Morcos)
4e7e2e1 Update RPC argument names (John Newbery)
481f289 rpc: Named argument support for bitcoin-cli (Wladimir J. van der Laan)
9adb4e1 rpc: Argument name consistency (Wladimir J. van der Laan)
8d713f7 rpc: Named arguments for rawtransaction calls (Wladimir J. van der Laan)
37a166f rpc: Named arguments for wallet calls (Wladimir J. van der Laan)
78b684f rpc: Named arguments for mining calls (Wladimir J. van der Laan)
b8ebc59 rpc: Named arguments for net calls (Wladimir J. van der Laan)
2ca9dcd test: Add test for RPC named arguments (Wladimir J. van der Laan)
fba1a61 rpc: Named arguments for misc calls (Wladimir J. van der Laan)
286ec08 rpc: Add 'echo' call for testing (Wladimir J. van der Laan)
495eb44 rpc: Named arguments for blockchain calls (Wladimir J. van der Laan)
6f1c76a rpc: Support named arguments (Wladimir J. van der Laan)
5865d41 authproxy: Add support for RPC named arguments (Wladimir J. van der Laan)
Previously addnodes were in competition with outbound connections
for access to the eight outbound slots.
One result of this is that frequently a node with several addnode
configured peers would end up connected to none of them, because
while the addnode loop was in its two minute sleep the automatic
connection logic would fill any free slots with random peers.
This is particularly unwelcome to users trying to maintain links
to specific nodes for fast block relay or purposes.
Another result is that a group of nine or more nodes which are
have addnode configured towards each other can become partitioned
from the public network.
This commit introduces a new limit of eight connections just for
addnode peers which is not subject to any of the other connection
limitations (including maxconnections).
The choice of eight is sufficient so that under no condition would
a user find themselves connected to fewer addnoded peers than
previously. It is also low enough that users who are confused
about the significance of more connections and have gotten too
copy-and-paste happy will not consume more than twice the slot
usage of a typical user.
Any additional load on the network resulting from this will likely
be offset by a reduction in users applying even more wasteful
workaround for the prior behavior.
The retry delays are reduced to avoid nodes sitting around without
their added peers up, but are still sufficient to prevent overly
aggressive repeated connections. The reduced delays also make
the system much more responsive to the addnode RPC.
Ban-disconnects are also exempted for peers added via addnode since
the outbound addnode logic ignores bans. Previously it would ban
an addnode then immediately reconnect to it.
A minor change was also made to CSemaphoreGrant so that it is
possible to re-acquire via an object whos grant was moved.
