8276e70de Adding assert to avoid a memory access violation inside of PartialMerkleTree::CalcHash() (Chris Stewart)
Pull request description:
Fixing a possible memory access violation in CPartialMerkleTree::CalcHash().
This can happen if we some how a merkle tree with zero txids. I don't think this can happen in practice as we only send merkle block messages on the p2p network as of now -- we cannot receive them.
This was found with #8469, specifically using this [generator](https://github.com/Christewart/bitcoin/blob/rapidcheck/src/test/gen/merkleblock_gen.h#L52-L77) which will cause a memory access violation on [this test case](https://github.com/Christewart/bitcoin/blob/rapidcheck/src/test/merkleblock_properties.cpp#L48).
Tree-SHA512: b95904ec45ea3f082c7722161d93ee06b24c706fbffa909a6e995ed14788aed2830f91b626da6f0347660c45874a0735dab61c9440b59c949c690af4165c83fb
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change).
This fixes an issue where you could reserve a keypool entry, then
top up the keypool, writing out a new key at the given index, then
return they key from the pool. This isnt likely to cause issues,
but given there is no reason to ever re-use keypool indexes
(they're 64 bits...), best to avoid it alltogether.
b0e8e2d Print one log message per keypool top-up, not one per key. (Gregory Maxwell)
41dc163 Increase wallet default keypool size to 1000. (Gregory Maxwell)
30d8f3a Pushdown walletdb though CWallet::AddKeyPubKey to avoid flushes. (Gregory Maxwell)
3a53f19 Pushdown walletdb object through GenerateNewKey/DeriveNewChildKey. (Gregory Maxwell)
Pull request description:
This carries the walletdb object from top-up through GenerateNewKey/DeriveNewChildKey/CWallet::AddKeyPubKey, which allows us to avoid the flush on destruction until the top up finishes instead of flushing the wallet for every key.
This speeds up adding keys by well over 10x on my laptop (actually something like 17x), I wouldn't be surprised if it were an even bigger speedup on spinning rust.
Then it increases the keypool size to 1000. I would have preferred to use 10,000 but in the case where the user creates a new wallet and then turns on encryption it seems kind of dumb to have >400KB of marked-used born unencrypted keys just laying around.
(Thanks to Matt for cluesticking me on how to bypass the crypter spaghetti)
Tree-SHA512: 868303de38fce4c3f67d7fe133f765f15435c94b39d252d7450b5fee5c607a3cc2f5e531861a69d8c8877bf130e0ff4c539f97500a6bc0ff6d67e4a42c9385c7
dba485d init: Factor out AppInitLockDataDirectory (Wladimir J. van der Laan)
Pull request description:
Alternative to #10818, alternative solution to #10815.
After this change: All the AppInit steps before and inclusive AppInitLockDataDirectory must not have Shutdown() called in case of failure. Only when AppInitMain fails, Shutdown should be called.
Changes the GUI and bitcoind code to consistently do this.
Tree-SHA512: 393e1a0ae05eb8e791025069e3ac4f6f3cdeb459ec63feda85d01cf6696ab3fed7632b6a0ac3641b8c7015af51d46756b5bba77f5e5f0c446f0c2dea58bbc92e
Change parameter for conservative estimates to be an estimate_mode string.
Change to never return a -1 for failure but to instead omit the feerate and
return an error string. Throw JSONRPC error on invalid nblocks parameter.
Alternative to #10818, alternative solution to #10815.
After this change: All the AppInit steps before and inclusive
AppInitLockDataDirectory must not have Shutdown() called in case of
failure. Only when AppInitMain fails, Shutdown should be called.
Changes the GUI and bitcoind code to consistently do this.
This redefines dust to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
11590d3 Properly bound check conf_target in wallet RPC calls (Alex Morcos)
fd29d3d Remove checking of mempool min fee from estimateSmartFee. (Alex Morcos)
2fffaa9 Make QT fee displays use GetMinimumFee instead of estimateSmartFee (Alex Morcos)
1983ca6 Use CoinControl to pass custom fee setting from QT. (Alex Morcos)
03ee701 Refactor to use CoinControl in GetMinimumFee and FeeBumper (Alex Morcos)
ecd81df Make CoinControl a required argument to CreateTransaction (Alex Morcos)
Pull request description:
This builds on #10589 (first 5 commits from that PR, last 5 commits are new)
The first couple commits refactor to use the CCoinControl class to pass fee calculation parameters around.
This allows for fixing the buggy interaction in QT between the global payTxFee which can be modified by the RPC call settxfee or temporarily modified by the QT custom fee settings. Before these changes the GUI could sometimes send a transaction with a recently set payTxFee and not respect the settings displayed in the GUI. After these changes, using the GUI does not involve the global transaction confirm target or payTxFee.
The prospective fee displays in the smart fee slider and the coin control dialog are changed to use the fee calculation from GetMinimumFee, this simplifies the code and makes them slightly more correct in edge cases.
Maxing the fee calculation with the mempool min fee is move from estimateSmartFee to GetMinimumFee.
This fixes a long standing bug, and should be tagged for 0.15 as it is holding up finalizing the estimatesmartfee RPC API before release.
Tree-SHA512: 4d36a1bd5934aa62f3806d380fcafbef73e9fe5bdf190fc5259a3e3a13349e5ce796e50e7068c46dc630ccf56d061bce5804f0bfe2e082bb01ca725b63efd4c1
4c3b538 [logs] fix zapwallettxes startup logs (John Newbery)
e7a2181 [wallet] fix zapwallettxes interaction with persistent mempool (John Newbery)
ff7365e [tests] fix flake8 warnings in zapwallettxes.py (John Newbery)
Pull request description:
zapwallettxes previously did not interact well with persistent mempool.
zapwallettxes would cause wallet transactions to be zapped, but they
would then be reloaded from the mempool on startup. This commit softsets
persistmempool to false if zapwallettxes is enabled so transactions are
actually zapped.
This PR also fixes the zapwallettxes.py functional test, which did not properly test this feature. The test line:
```py
assert_raises(JSONRPCException, self.nodes[0].gettransaction, [txid3])
#there must be a expection because the unconfirmed wallettx0 must be gone by now
```
is not actually testing the presence of the transaction since the RPC is being called incorrectly (with an array instead of a string). The `assert_raises()` passes since an assert is raised, but it's not the one the test writer had in mind!
Fixes#9710 .
Tree-SHA512: e3236efc7a2fd2b3bf1d9e2e8a7726d470c57f5d95cf41b7bde264edc8817bd36a6f3feff52f8de8db0ef64b7247c88b24e7ff7cefaa706cba86fe4e2135a508
5618b7d Do not shadow upper local variable `state`. (Pavel Janík)
Pull request description:
Tests added in #10192 emit few shadowing warnings:
```
test/txvalidationcache_tests.cpp:268:26: warning: declaration shadows a local variable [-Wshadow]
test/txvalidationcache_tests.cpp:296:26: warning: declaration shadows a local variable [-Wshadow]
test/txvalidationcache_tests.cpp:357:26: warning: declaration shadows a local variable [-Wshadow]
```
Remove shadowing declarations and reuse the upper local declaration as in other already present test cases.
Tree-SHA512: 1e3c52cf963f8f33e729900c8ecdcd5cc6fe28caa441ba53c4636df9cc3d1a351ca231966d36384589f1340ae8ddd447424c2ee3e8527d334d0412f0d1a10c8f
6835cb0ab Avoid static analyzer warnings regarding uninitialized arguments (practicalswift)
Pull request description:
Avoid static analyzer warnings regarding _"Function call argument is a pointer to uninitialized value"_ in cases where we are intentionally using such arguments.
This is achieved by using `f(b.begin(), b.end())` (`std::array<char, N>`) instead of `f(b, b + N)` (`char b[N]`).
Rationale:
* Reduce false positives by guiding static analyzers regarding our intentions.
Before this commit:
```shell
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
bench/base58.cpp:23:9: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
EncodeBase58(b, b + 32);
^
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
bench/verify_script.cpp:59:5: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
key.Set(vchKey, vchKey + 32, false);
^
$
```
After this commit:
```shell
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
$
```
Tree-SHA512: 5814a320ca8b959d0954bb64393424bcad73f942d2e988de1cd6788f39153b93900325532f2e340de02d740a3953385d212ae08e7ec72bb4c394a40475f251df
d0413c670 Use range based for loop (René Nyffenegger)
Pull request description:
Instead of iterating over 0 .. 1 and then deciding on an actual desired
value, use a range based for loop for the desired value.
Tree-SHA512: 0a7a4a80516c9f16cf97fa7d257088b8386360e19b93c4deac3d745b6270ea452c513821686d7d14a159a235763e034f9b14eef222ca15f7eb71c37bd1c2c380
d40a72ccb Clarify *(--.end()) iterator semantics in CWallet::TopUpKeyPool (Matt Corallo)
28301b978 Meet code style on lines changed in the previous commit (Matt Corallo)
4a3fc3562 Track keypool entries as internal vs external in memory (Matt Corallo)
Pull request description:
This is an alternative version of #10184. As @jonasschnelli points out there, the performance regressions are pretty minimal, but given that this is a pretty simple, mechanical change, its probably worth doing.
Tree-SHA512: e83f9ebf2998f8164d1b2eebe5e6dcdeadea8c30b7612861f830758c08bf4093cd6a67b3bcfa9cfcb139e5e0b106fc8898a975fc69f334981aefc756568ab613
5c643241e [utils] allow square brackets for ipv6 addresses in bitcoin-cli (John Newbery)
fe4fabaf1 [refactor] move SplitHostPort() into utilstrencodings (John Newbery)
Pull request description:
bitcoin-cli's `-rpcconnect` can accept ipv6 addresses (as long as the libevent version is new enough), but fails to parse ipv6 with square brackets. This PR makes `bitcoin-cli` parse ipv6 in square brackets correctly.
`bitcoin-cli -rpcconnect=[::1] <command>`
should now be equivalent to
`bitcoin-cli -rpcconnect=::1 <command>`
This is useful so the `bitcoin-cli` option can now be in the same format as the `bitcoind` option.
Doesn't include tests. I have a branch that fully tests `bitcoin-cli`, but that's queued behind several intermediate PRs.
- first commit moves `SplitHostPort()` from libbitcoin_common into libbitcoin_util
- second commit adds proper ipv6 parsing to bitcoin-cli
Tree-SHA512: 249d409f10360c989474283341f458cc97364a56a7d004ae6d5f13d8bffe3a51b5dc2484d42218848e2d42cd9c0b13a1b92e94ea19b209f7e91c875c208d8409
0aadc11fd Avoid dereference-of-casted-pointer (Pieter Wuille)
Pull request description:
And prefer a static_cast to the intended reference type.
Tree-SHA512: e83b20023a4dca6029b46f7040a8a6fd54e1b42112ec0c87c3c3b567ed641de97a9e2335b57a2efb075491f641e5b977bc226a474276bea0c3c3c71d8d6ac54d
zapwallettxes previously did not interact well with persistent mempool.
zapwallettxes would cause wallet transactions to be zapped, but they
would then be reloaded from the mempool on startup. This commit softsets
persistmempool to false if zapwallettxes is enabled so transactions are
actually zapped.
228987d84 getbalance example covers at least 6 confirms (Gregory Sanders)
Tree-SHA512: 328d60b007ee75d809f4d28a7d9e5537d3c1446bd30c4c2ae57c690b8e83f6287cbcd3d8c955e8ba07ab62e27f9d27497c55219ff14fd5af7759dec465673fa2
Avoid static analyzer warnings regarding "Function call argument
is a pointer to uninitialized value" in cases where we are
intentionally using such arguments.
This is achieved by using ...
`f(b.begin(), b.end())` (`std::array<char, N>`)
... instead of ...
`f(b, b + N)` (`char b[N]`)
Rationale:
* Reduce false positives by guiding static analyzers regarding our
intentions.
Before this commit:
```
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
bench/base58.cpp:23:9: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
EncodeBase58(b, b + 32);
^
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
bench/verify_script.cpp:59:5: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
key.Set(vchKey, vchKey + 32, false);
^
$
```
After this commit:
```
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
$
```
This check has been moved to the wallet logic GetMinimumFee. The rpc call to
estimatesmartfee will now no longer return a result maxed with the mempool min
fee, but automated fee calculations from the wallet will produce the same result
as before and coincontrol and sendcoins dialogs in the GUI will correctly
display the right prospective fee.
changes to policy/fees.cpp include a big whitespace indentation change.
Remove helper function (CalculateEstimateType) for determining whether
estimates should be conservative or not, now that this is only called
once from GetMinimumFee and incorporate the logic directly there.
This fixes buggy behavior where we were temporarily setting and unsetting the
global payTxFee when trying to send a transaction with a custom fee from the
GUI. The previous behavior was inconsistent depending on the order of using the
RPC call settxfee and clicking various radio buttons in the sendcoinsdialog.
The new behavior is that transactions sent with the GUI will always use either
the smartfee slider value or the custom fee set on the GUI and they will not
affect the global defaults which are only for RPC and initial GUI values.
2aef1f182 [Qt] migrate old fee slider value to new dropbown Always round up (conservative) (Jonas Schnelli)
bc1be90e3 [Qt] replace fee slider with a Dropdown, extend conf. targets (Jonas Schnelli)
Tree-SHA512: 53796cf0b434dd3db5d4680dbeb6231a7df8f15d88187178fd4db8917cd7fc60091ce2c1589fd93668fc94bb13f989aba5b7ef3792fa95ee1f9f21a15709e2d3
dd97a529a Properly forbid -salvagewallet and -zapwallettxes for multi wallet. (Alex Morcos)
Tree-SHA512: dcde8f854ae957b4d3af4bcf1b811e0b6e9b93602764f86499e46a28d304cd4ee93ba058c03f6ca74ccb60e1310c83e53b698c64d93e5503115377655b80d44d
Warning from gcc 7.1 is ./prevector.h:450:25: warning:
'*((void*)(&<anonymous>)+8).prevector<28, unsigned char>::_union.prevector<28, unsigned char>::direct_or_indirect::<anonymous>.prevector<28, unsigned char>::direct_or_indirect::<unnamed struct>::indirect'
may be used uninitialized in this function [-Wmaybe-uninitialized]
Some people keep thinking that MAX_BLOCK_BASE_SIZE is a separate
size limit from the weight limit when it fact it is superfluous,
and used in early tests before the witness data has been
validated or just to compute worst case sizes. The size checks
that use it would not behave any differently consensus wise
if they were eliminated completely.
Its correct value is not independently settable but is a function
of the weight limit and weight formula.
This patch just eliminates it and uses the scale factor as
required to compute the worse case constants.
It also moves the weight factor out of primitives into consensus,
which is a more logical place for it.
18bacec6c Make check to distinguish between orphan txs and old txs more efficient. (Alex Morcos)
Tree-SHA512: b6b4bad89aa561975dce7b68b2fdad5623af5ebcb9c38fd6a72b5f6d0544ed441df4865591ac018f7ae0df9b5c60820cb4d9e55664f5667c9268458df70fd554
d34d77a build: verify that the assembler can handle crc32 functions (Cory Fields)
Pull request description:
Also, enable crc32 even if -msse4.2 wasn't added by us, as long as it works. This allows custom flags (such as -march=native) to work as expected.
Addresses #10670.
Tree-SHA512: e1a41a87b078d270bc645814315b229ad9c16556a4d14fb66b27a65b28d0caf9bf324f8c1e221854992aa17f53466eece06faebbf74d59b3d4ff2e6db6c614a4
69a4339ef missing white space in function arg (Lawrence Nahum)
Pull request description:
Tree-SHA512: 94d832eca0b5429cf48c7c1d4489942b53182c5b7ad9f24264867e7631301173c23a48f7b2e8fd22ff1b3137bafacb3f9d4320f4df235668c9096aaefff7afe8
959dd8781 Avoid printing incorrect block indexing time due to uninitialized variable (practicalswift)
Tree-SHA512: a76e43c3ffa734ed5c7eadf363f345f268aa0e6ce775aba8f856fe3bbc82f240dc7c734c5ca3ac500a12eb41fae00623413e79f484d5acf809b6e400851d771d
Adding comment to assert in PartialMerkleTree::CalcHash()
Adding comment on CMerkleBlock indicating it calls something that contains an assert
Removing EOL whitespace
Due to the iterative process of selecting new coins in each loop a new fee is
calculated that needs to be met each time. In the typical case if the most
recent iteration of the loop produced a much smaller transaction and we have now
gathered inputs with too many fees, we can just reduce the change. However in
the case where there is no change output, it is possible to end up with a
transaction which drastically overpays fees. This commit addresses that case,
by creating a change output if the overpayment is large enough to support it,
this is accomplished by rerunning the transaction creation loop without
selecting new coins.
Thanks to instagibbs for working on this as well
5e3b7b5 Improve error reporting for estimaterawfee (Alex Morcos)
1fafd70 Add function to report highest estimate target tracked per horizon (Alex Morcos)
9c85b91 Change API to estimaterawfee (Alex Morcos)
Tree-SHA512: e624c6e7967e9e48abe49f5818bd674e5710e571cc093029d2f90d39fdfba3c1f30e83bf89f6dce97052b59a7d9636a64642ccfb26effd149c417d0afbed0c0b
That OP_NOP10 is the last executable opcode is a bit of a obscure trivia, and the MAX_OPCODE constant already exists. This merely standardizes use of MAX_OPCODE over OP_NOP10 where it makes sense and is more clear.
1f668b6 Expose if CScheduler is being serviced, assert its not in EmptyQueue (Matt Corallo)
3192975 Flush CValidationInterface callbacks prior to destruction (Matt Corallo)
08096bb Support more than one CScheduler thread for serial clients (Matt Corallo)
2fbf2db Add default arg to CScheduler to schedule() a callback now (Matt Corallo)
cda1429 Give CMainSignals a reference to the global scheduler (Matt Corallo)
3a19fed Make ValidationInterface signals-type-agnostic (Matt Corallo)
ff6a834 Use TestingSetup to DRY qt rpcnestedtests (Matt Corallo)
Tree-SHA512: fab91e34e30b080ed4d0a6d8c1214910e383c45440676e37be61d0bde6ae98d61e8903d22b846e95ba4e73a6ce788798350266feba246d8a2ab357e8523e4ac5
Add support for setting each of these attributes on a per RPC call basis to sendtoaddress, sendmany, fundrawtransaction (already had RBF), and bumpfee (already had RBF and conf target).
Note that the CScheduler thread cant be running at this point,
it has already been stopped with the rest of the init threadgroup.
Thus, just calling any remaining loose callbacks during Shutdown()
is sane.
This will be used by CValidationInterface soon.
This requires a bit of work as we need to ensure that most of our
callbacks happen in-order (to avoid synchronization issues in
wallet) - we keep our own internal queue and push things onto it,
scheduling a queue-draining function immediately upon new
callbacks.
9bbf600 Use method name from __func__ macro (darksh1ne)
Tree-SHA512: da6d0714f458b538189bbc2b53252ba353dcc1ef15fa780cb7f690a034b58ab0dbaa3a89f83f044c746241ee265a70fc092449f1cc7be4f190775423fbca5fc5
GetMinimumFee now passes the conservative argument into estimateSmartFee.
Call CalculateEstimateType(mode) before calling GetMinimumFee or estimateSmartFee to determine the value of this argument.
CCoinControl can now be used to control this mode.
73c942e Use "replaceable" instead of "rbfoptin" in bitcoin-tx. (Matt Corallo)
fb915d5 Use "replaceable" instead of "optIntoRbf" in fundrawtransaction. (Matt Corallo)
928c681 Use "replaceable" instead of "optintorbf" in createrawtransaction. (Matt Corallo)
Tree-SHA512: 8922451c00abb63aaa08b4a9e314e89c22233b32f207259fbc25367f7d5b67efbaccc7e2a4958c18611ad498da302296242860c7be965a0e996dcde3e89efa07
Use __func__ macro in std::runtime_exception to:
1. fix method name in CWalletTx::GetAvailableWatchOnlyCredit()
2. refactor CWalletTx::GetAvailableCredit()
(by hiding boost::signals stuff in the .cpp)
This allows us to give it a bit more intelligence as we move
forward, including routing some signals through CScheduler. While
the introduction of a "internals" pointer in the class is pretty
ugly, the fact that we no longer need to include boost/signals
directly from validationinterface.h is very much worth the loss.
ecb4fc382 fix typo in help text for removeprunedfunds (Akio Nakamura)
Tree-SHA512: 2603851f1ac90bc0b90ced6355b0056e4cb658303cb2cd03ee0827ed0053157ebb87de48076f4d4f556991bfdbdb65d0a68a8dbd275c501cee4c9b5746a9562b
2a96283 rpc: Update `generate` for developer notes (Wladimir J. van der Laan)
df7e2f0 rpc: Move the `generate` RPC call to rpcwallet (Wladimir J. van der Laan)
Tree-SHA512: ec658d6178f8435dc54b9d9c6dd59f873055a8ae0c3f177c02049d77b93107dd5fc17a1ff56d50f051810d52fdf306846eaba2ef4fc8d2a6cfa831f57a1045c4
Fixes:
init.cpp: In function ‘bool AppInitMain(boost::thread_group&, CScheduler&)’:
init.cpp:1499:56: warning: ‘nStart’ may be used uninitialized in this function [-Wmaybe-uninitialized]
LogPrintf(" block index %15dms\n", GetTimeMillis() - nStart);
^
542ce6e Report [CANCELLED] instead of [DONE] when shut down during txdb upgrade (Jonas Schnelli)
83fbea3 Report txdb upgrade not more often then every 10% (Jonas Schnelli)
06c5b6e Show txdb upgrade progress in debug log (Jonas Schnelli)
316fcb5 Allow to cancel the txdb upgrade via splashscreen callback (Jonas Schnelli)
ae09d45 Allow to shut down during txdb upgrade (Jonas Schnelli)
00cb69b [Qt] allow to execute a callback during splashscreen progress (Jonas Schnelli)
Tree-SHA512: 23190f23f441bfd60821e49f8b3698a6bef97eb0e0ee659328e4a7395769ecd1616420eacc38aa1fa0ff62b9de5f13a0098dc798cdec6bff649575cefebc0db2
This makes it possible to mine to any wallet when multi-wallet mode is added.
Solves the same problem as #10649, but IMO in a cleaner way.
It also gets rid of the circuitous `ScriptForMining` method on
`CValidationInterface`, which really doesn't belong there.
After this change it's still possible to mine without wallet through
`generatetoaddress`.
176c021 [qa] Test non-atomic chainstate writes (Suhas Daftuar)
d6af06d Dont create pcoinsTip until after ReplayBlocks. (Matt Corallo)
eaca1b7 Random db flush crash simulator (Pieter Wuille)
0580ee0 Adapt memory usage estimation for flushing (Pieter Wuille)
013a56a Non-atomic flushing using the blockchain as replay journal (Pieter Wuille)
b3a279c [MOVEONLY] Move LastCommonAncestor to chain (Pieter Wuille)
Tree-SHA512: 47ccc62303f9075c44d2a914be75bd6969ff881a857a2ff1227f05ec7def6f4c71c46680c5a28cb150c814999526797dc05cf2701fde1369c06169f46eccddee
aa95947 Use the override specifier (C++11) where we expect to be overriding the virtual function of a base class (practicalswift)
Tree-SHA512: 3835e9b4ceaa4b2db485a25dfa3e5fe50c2e3ecb22ca9d5331aed7728aa496d4378fb84c0a1a3c47b0adecc10a00bca99cc239cbaf94cf2ce5b4cda497db6023
Check that cached script execution results are only valid for the same
script flags; that script execution checks are returned for non-cached
transactions; and that cached results are only valid for transactions
with the same witness hash.
Checking for the existence in the CCoinsViewCache of the outputs of a new tx
will result in a disk hit for every output since they will not be found. On the
other hand if those outputs exist already, then the inputs must also have been
missing, so we can move this check inside the input existence check so in the
common case of a new tx it doesn't need to run.
The purpose of the check is to avoid spamming the orphanMap with slightly old
txs which we have already seen in a block, but it is already only optimistic
(depending on the outputs not being spent), so make it even more efficient by
only checking the cache and not the entire pcoinsTip.
c074752 [RPC] Add an uptime command that displays the amount of time that bitcoind has been running (Ricardo Velhote)
Tree-SHA512: 8f59d4205042885f23f5b87a0eae0f5d386e9c6134e5324598e7ee304728d4275f383cd154bf1fb25350f5a88cc0ed9f97edb099e9b50c4a0ba72d63ec5ca5b4
This removes the possibility for GetCoin/HaveCoin/HaveCoinInCache to return
true while the respective coin is spent. By doing it across all calls, some
extra checks can be eliminated.
coins_tests is modified to call HaveCoin sometimes before and sometimes
after AccessCoin. A further change is needed because the semantics for
GetCoin slightly changed, causing a pruned entry in the parent cache to not
be pulled into the child in FetchCoin.
Adds new functional test, dbcrash.py, which uses -dbcrashratio to exercise the
logic for recovering from a crash during chainstate flush.
dbcrash.py is added to the extended tests, as it may take ~10 minutes to run
Use _Exit() instead of exit() for crash simulation
This eliminates stderr output such as:
terminate called without an active exception
or
Assertion failed: (!pthread_mutex_destroy(&m)), function ~recursive_mutex, file /usr/local/include/boost/thread/pthread/recursive_mutex.hpp, line 104.
Eliminating the stderr output on crash simulation allows testing with
test_runner.py, which reports a test as failed if stderr is produced.
This requires that we not access pcoinsTip in InitBlockIndex's
FlushStateToDisk (so we just skip it until later in AppInitMain)
and the LoadChainTip in LoadBlockIndex (which there is already one
later in AppinitMain, after ReplayBlocks, so skipping it there is
fine).
Includes some simplifications by Suhas Daftuar and Pieter Wuille.
5257698 Change semantics of HaveCoinInCache to match HaveCoin (Alex Morcos)
Tree-SHA512: 397e9ba28646b81fffa53e55064735d4d242aaffdf8484506825f785b0e414f334e4c5cd1e4e1dd9a4b6d1f6954c7ecad15429934a1c4e8d39f596cbd9f5dd80
5a9b508 [trivial] Add end of namespace comments (practicalswift)
Tree-SHA512: 92b0fcae4d1d3f4da9e97569ae84ef2d6e09625a5815cd0e5f0eb6dd2ecba9852fa85c184c5ae9de5117050330ce995e9867b451fa8cd5512169025990541a2b
deaf48b Handle TIMESTAMP_WINDOW within CWallet::RescanFromTime (Russell Yanofsky)
5b2be2b Make CWallet::RescanFromTime comment less ambiguous (Russell Yanofsky)
9bb66ab Add RescanFromTime method and use from rpcdump (Russell Yanofsky)
ccf84bb Move birthday optimization out of ScanForWalletTransactions (Russell Yanofsky)
Tree-SHA512: cd38433b8f5c5e44ecfba830a6a26bd9a9d0f4a22ae42bce17773d1a6fb25e1ee4289484996dad2d7acfa03059917ff062459f25030a761da7083ba5fbc87bc9
1887337 Add a comment explaining the use of MAX_BLOCK_BASE_SIZE. (Gregory Maxwell)
Tree-SHA512: 4c643a3696241fbf4eac8d58bb26586f319338b28ee86d20394a8ea362911b467853eb40c43487ede753209a3c7bee2e576d2ca80627e9fc924fabefbcaea34b
c1be285 chainparams: make supported service bits option explicit (Cory Fields)
d5c7c1c net: use an internal address for fixed seeds (Cory Fields)
6cdc488 net: switch to dummy internal ip for dns seed source (Cory Fields)
6d0bd5b net: do not allow resolving to an internal address (Cory Fields)
7f31762 net: add an internal subnet for representing unresolved hostnames (Cory Fields)
Tree-SHA512: 9bf1042bef546ac3ef0e0d3a9a5555eb21628ff2674a0cf8c6367194b22bfdab477adf452c0e7c56f44e0fb37debc5e14bdb623452e076fb9c492c7702601d7a
dd869c6 Add an explanation of quickly hashing onto a non-power of two range. (Gregory Maxwell)
Tree-SHA512: 8b362e396206a4ee2e825908dcff6fe4525c12b9c85a6e6ed809d75f03d42edcfba5e460a002e5d17cc70c103792f84d99693563b638057e4e97946dd1d800b2
d5711f4 Filter subtrees and and benchmarks from coverage report (Andrew Chow)
405b86a Replace lcov -r commands with faster way (Andrew Chow)
c8914b9 Have `make cov` optionally include branch coverage statistics (Andrew Chow)
Tree-SHA512: 9c349a7baeb7430ea586617c52f91177df58e3546d6dc573e26815ddb79e30ab1873542d85ac1daca5e1fb2c6d6c8965824b42d027b6b0496a744af57b095852
cf68a48 Deduplicate addrdb.cpp and use CHashWriter/Verifier (Pieter Wuille)
Tree-SHA512: 0301332e797f64da3a1588c9ebaf533af58da41e38f8a64206bff20102c5e82c2a7c630ca3150cf451b2ccf4acb3dd45e44259b6ba15e92786e9e9a2b225bd2f
1ae86ec Changed event RAII helper functions to inline to deal with duplicate symbol linker errors. (Karl-Johan Alm)
fd369d2 Switched httpserver.cpp to use RAII wrapped libevents. (Kalle Alm)
Tree-SHA512: 877e431f211024d42a3b0800e860e02833398611433e8393f8d5d4970f47f4bd670b900443678c067fec110c087aaab7dc1981ccbf17f6057676fdbbda89aed9
6171826 Don't create change at the dust limit, even if it means paying more than expected (Alex Morcos)
Tree-SHA512: d4cf939b97a92d63d4703ad152093c9dc60e74af590697bc21adbcdf17fc9e6ffb37d46d5eefafbd69327d1bcb79911f1b826ce1d960d895d464c4408c4995c3
This wraps CheckInputs in ATMP's cache-inputs call to check that
each scriptPubKey the CCoinsViewCache provides is the one which
was committed to by the input's transaction hash.
