The wallet now uses the mempool fee estimator with a new
command-line option: -txconfirmtarget (default: 1) instead
of using hard-coded fees or priorities.
A new bitcoind that hasn't seen enough transactions to estimate
will fall back to the old hard-coded minimum priority or
transaction fee.
-paytxfee option overrides -txconfirmtarget.
Relaying and mining code isn't changed.
For Qt, the coin control dialog now uses priority estimates to
label transaction priority (instead of hard-coded constants);
unspent outputs were consistently labeled with a much higher
priority than is justified by the free transactions actually
being accepted into blocks.
I did not implement any GUI for setting -txconfirmtarget; I would
suggest getting rid of the "Pay transaction fee" GUI and replace
it with either "target number of confirmations" or maybe
a "faster confirmation <--> lower fee" slider or select box.
-respendnotify=<cmd> Execute command when a network tx respends wallet
tx input (%s=respend TxID, %t=wallet TxID)
Add respendsobserved array to gettransaction, listtransactions, and
listsinceblock RPCs. This omits the malleated clones that are included
in the walletconflicts array.
Add RPC help for respendsobserved and walletconflicts (help was missing
for the latter).
Allows network wallets and other clients to see transactions that respend
a prevout already spent in an unconfirmed transaction in this node's mempool.
Knowledge of an attempted double-spend is of interest to recipients of the
first spend. In some cases, it will allow these recipients to withhold
goods or services upon being alerted of a double-spend that deprives them
of payment.
As before, respends are not added to the mempool.
Anti-Denial-of-Service-Attack provisions:
- Use a bloom filter to relay only one respend per mempool prevout
- Rate-limit respend relays to a default of 100 thousand bytes/minute
- Define tx2.IsEquivalentTo(tx1): equality when scriptSigs are not considered
- Do not relay these equivalent transactions
Remove an unused variable declaration in txmempool.cpp.
bitcoin-config.h moved, but the old file is likely to still exist when
reconfiguring or switching branches. This would've caused files to not rebuild
correctly, and other strange problems.
Make the path explicit so that the old one cannot be found.
Core libs use config/bitcoin-config.h.
Libs (like crypto) which don't want access to bitcoin's headers continue
to use -Iconfig and #include bitcoin-config.h.
Adds a copyright and attribution message to the `-version` output
(the same as shown in the About dialog in the GUI).
Move the message to a function LicenseInfo in init.cpp.
- add DEFAULT_LISTEN in net.h and use in the code (shared
setting between core and GUI)
Important: This makes it obvious, that we need to re-think the
settings/options handling, as GUI settings are processed before
any parameter-interaction (which is mostly important for network
stuff) in AppInit2()!
f0a83fc Use Params().NetworkID() instead of TestNet() from the payment protocol (jtimon)
2871889 net.h was using std namespace through chainparams.h included in protocol.h (jtimon)
c8c52de Replace virtual methods with static attributes, chainparams.h depends on protocol.h instead of the other way around (jtimon)
a3d946e Get rid of TestNet() (jtimon)
6fc0fa6 Add RPCisTestNet chain parameter (jtimon)
cfeb823 Add RequireStandard chain parameter (jtimon)
21913a9 Add AllowMinDifficultyBlocks chain parameter (jtimon)
d754f34 Move majority constants to chainparams (jtimon)
8d26721 Get rid of RegTest() (jtimon)
cb9bd83 Add DefaultCheckMemPool chain parameter (jtimon)
2595b9a Add DefaultMinerThreads chain parameter (jtimon)
bfa9a1a Add MineBlocksOnDemand chain parameter (jtimon)
1712adb Add MiningRequiresPeers chain parameter (jtimon)
New RPC methods: return an estimate of the fee (or priority) a
transaction needs to be likely to confirm in a given number of
blocks.
Mike Hearn created the first version of this method for estimating fees.
It works as follows:
For transactions that took 1 to N (I picked N=25) blocks to confirm,
keep N buckets with at most 100 entries in each recording the
fees-per-kilobyte paid by those transactions.
(separate buckets are kept for transactions that confirmed because
they are high-priority)
The buckets are filled as blocks are found, and are saved/restored
in a new fee_estiamtes.dat file in the data directory.
A few variations on Mike's initial scheme:
To estimate the fee needed for a transaction to confirm in X buckets,
all of the samples in all of the buckets are used and a median of
all of the data is used to make the estimate. For example, imagine
25 buckets each containing the full 100 entries. Those 2,500 samples
are sorted, and the estimate of the fee needed to confirm in the very
next block is the 50'th-highest-fee-entry in that sorted list; the
estimate of the fee needed to confirm in the next two blocks is the
150'th-highest-fee-entry, etc.
That algorithm has the nice property that estimates of how much fee
you need to pay to get confirmed in block N will always be greater
than or equal to the estimate for block N+1. It would clearly be wrong
to say "pay 11 uBTC and you'll get confirmed in 3 blocks, but pay
12 uBTC and it will take LONGER".
A single block will not contribute more than 10 entries to any one
bucket, so a single miner and a large block cannot overwhelm
the estimates.
Use CFeeRate instead of an int64_t for quantities that are
fee-per-size.
Helps prevent unit-conversion mismatches between the wallet,
relaying, and mining code.
Previously if bitcoind is linked with an OpenSSL which is compiled
without EC support, this is seen as an assertion failure "pKey !=
NULL" at key.cpp:134, which occurs after several seconds. It is an
esoteric piece of knowledge to interpret this as "oops, I linked
with the wrong OpenSSL", and because of the delay it may not even
be noticed.
The new output is
: OpenSSL appears to lack support for elliptic curve cryptography. For
more information, visit
https://en.bitcoin.it/wiki/OpenSSL_and_EC_Libraries
: Initialization sanity check failed. Bitcoin Core is shutting down.
which occurs immediately after attempted startup.
This also blocks in an InitSanityCheck() function which currently only
checks for EC support but should eventually do more. See #4081.
Add -rpcbind command option to specify binding RPC service on one
or multiple specific interfaces.
Functionality if -rpcbind is not specified remains the same as before:
- If no -rpcallowip specified, bind on localhost
- If no -rpcbind specified, bind on any interface
Implements part of #3111.
Size specifiers are no longer needed now that we use typesafe tinyformat
for string formatting, instead of the system's sprintf.
No functional changes.
This continues the work in #3735.
The year is 2014. All supported operating systems have IPv6 support,
most certainly at build time (this doesn't mean that IPv6 is configured,
of course).
If noone is exercising the functionality to disable it, that means it
doesn't get tested, and IMO it's better to get rid of it.
(it's also not used consistently in RPC/boost and Net code...)
Prints the actual version of BerkeleyDB that is linked against, if
wallet support is enabled.
Useful for troubleshooting.
For example:
2014-05-01 07:44:02 Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010)
2014-05-01 07:54:25 Using BerkeleyDB version Berkeley DB 5.1.29: (October 25, 20 11)
- introduce DEFAULT_SCRIPTCHECK_THREADS in main.h
- only show values from -"MAX_HW_THREADS" up to 16 for -par, as it
makes no sense to try to leave more "cores free" than the system
supports anyway
- use the new constant in optionsdialog and remove defaults from
.ui file
Amend to d5f1e72. It turns out that BerkelyDB was including inttypes.h
indirectly, so we cannot fix this with just macros.
Trivial commit: apply the following script to all .cpp and .h files:
# Middle
sed -i 's/"PRIx64"/x/g' "$1"
sed -i 's/"PRIu64"/u/g' "$1"
sed -i 's/"PRId64"/d/g' "$1"
# Initial
sed -i 's/PRIx64"/"x/g' "$1"
sed -i 's/PRIu64"/"u/g' "$1"
sed -i 's/PRId64"/"d/g' "$1"
# Trailing
sed -i 's/"PRIx64/x"/g' "$1"
sed -i 's/"PRIu64/u"/g' "$1"
sed -i 's/"PRId64/d"/g' "$1"
After this commit, `git grep` for PRI.64 should turn up nothing except
the defines in util.h.
As the tinyformat-based formatting system (introduced in b77dfdc) is
type-safe, no special format characters are needed to specify sizes.
Tinyformat can support (ignore) the C99 prefixes such as "ll" but
chokes on MSVC's inttypes.h defines prefixes such as "I64X". So don't
include inttypes.h and define our own for compatibility.
(an alternative would be to sweep the entire codebase using sed -i to
get rid of the size specifiers but this has less diff impact)
5770254 Copyright header updates s/2013/2014 on files whose last git commit was done in 2014. contrib/devtools/fix-copyright-headers.py script to be able to perform this maintenance task with ease during the rest of the year, every year. Modifications to contrib/devtools/README.md to document what fix-copyright-headers.py does. (gubatron)
contrib/devtools/fix-copyright-headers.py script to be able to perform this maintenance task with ease during the rest of the year, every year. Modifications to contrib/devtools/README.md to document what fix-copyright-headers.py does.
- Log a warning when bootstrap files are specified using `-loadblock`
but cannot be opened.
- Log a warning when bootstrap.dat exists in the home directory
but cannot be opened.
This changes the block processing logic from "try to atomically switch
to a new block" to a continuous "(dis)connect a block, aiming for the
assumed best chain".
This means the smallest atomic operations on the chainstate become
individual block connections or disconnections, instead of entire
reorganizations. It may mean that we try to reorganize to one block,
fail, and rereorganize again to the old block. This is slower, but
doesn't require unbounded RAM.
It also means that a ConnectBlock which fails may be no longer called
from the ProcessBlock which knows which node sent it. To deal with that,
a mapBlockSource is kept, and invalid blocks cause asynchronous "reject"
messages and banning (if necessary).
After the tinyformat switch sprintf() family functions support passing
actual std::string objects.
Remove unnecessary c_str calls (236 of them) in logging and formatting.
Allow running bitcoind without server.
- Default to -server mode (of course) for bitcoind with SoftSetBoolArg
- Remove fForceServer argument from AppInit2
- Move fDaemon to a static variable in bitcoind
c3a7f51 Move `verifymessage` from rpcwallet to rpcmisc (Wladimir J. van der Laan)
723a03d Move `createmultisig` from rpcwallet to rpcmisc (Wladimir J. van der Laan)
452955f Move `validateaddress` from rpcwallet to rpcmisc (Wladimir J. van der Laan)
cd7fa8b Move `nTransactionFee` from main.cpp to wallet.cpp (Wladimir J. van der Laan)
a943bde Move `settxfee` from rpcblockchain to rpcwallet (Wladimir J. van der Laan)
16bc9aa Move `getinfo` from rpcnet to rpcmisc (Wladimir J. van der Laan)
652e156 add new RPC implementation file `rpcmisc.cpp` (Wladimir J. van der Laan)
When a InitError or InitWarning happens, the
GUI pops up but is unusable (until Init finishes).
This is caused by showNormalIfMinimized. Add a message
flag to skip this call for Init errors or warnings.
Seperate out the wallet options in HelpMessage, and
don't show them if compiled with --disable-wallet.
Also add documentation for `-disablewallet` option.
`-logtodebugger` is a strange, obscure, WIN32-only (mostly MSVC) thing.
Let's clean up the options a bit get rid of it.
test_bitcoin was using fLogToDebugger as a way to prevent logging to
debug.log. For this, add a boolean (not exposed as option) fLogToDebugLog that
defaults to true and is disabled in the tests.
The following mining-related RPC calls don't use the wallet:
- getnetworkhashps
- getmininginfo
- getblocktemplate
- submitblock
Enable them when compiling with --disable-wallet.
Remove unnecessary dependencies for bitcoin-cli
(leveldb, berkelydb, wallet, RPC server)
Build system changes:
- split libbitcoin.a into libbitcoin_common.a, libbitcoin_server.a and
libbitcoin_cli.a
Code changes (movement only):
- split up HelpMessage into HelpMessage in init.cpp and HelpMessageCli
in rpcclient.cpp
- move uiInterface from init.cpp to util.cpp
Split bitcoinrpc up into
- rpcserver: bitcoind RPC server
- rpcclient: bitcoin-cli RPC client
- rpcprotocol: shared common HTTP/JSON-RPC protocol code
One step towards making bitcoin-cli independent from the rest
of the code, and thus a smaller executable that doesn't have to
be linked against leveldb.
This commit only does code movement, there are no functional changes.
I'm writing some wallet regression tests using -regtest mode, and
need to generate an initial multi-hundred-block chain. Repeatedly
calling setgenerate to generate one block is slow and doesn't
work properly, because block creation happens asynchronously.
This adds two features to setgenerate in -regtest mode:
1) Instead of being interpreted as number of threads to start, the
third argument is the number of blocks to generate.
2) setgenerate will not return until the block creation threads
have created the requested number of blocks.
Use misc methods of avoiding unnecesary header includes.
Replace int typedefs with int##_t from stdint.h.
Replace PRI64[xdu] with PRI[xdu]64 from inttypes.h.
Normalize QT_VERSION ifs where possible.
Resolve some indirect dependencies as direct ones.
Remove extern declarations from .cpp files.
- re-work -debug help message text
- make -debug log every debugging information again (even all categories)
- remove unneeded fDebug checks in front of LogPrint()/qDebug(), as that
check is done in LogPrintf() when category is != NULL (true for all
LogPrint() calls
- remove fDebug ONLY in code which is NOT performance-critical
- harmonize addrman category name
- deprecate -debugnet usage, should be used via -debug=net and remove the
corresponding global
