The fundrawtransaction() RPC was returning misleading or incorrect error
codes (for example RPC_INTERNAL_ERROR when funding the transaction
failed). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
That error code has been replaced with RPC_WALLET_ERROR.
This commit also updates the test cases to explicitly test the error code.
The removeprunedfunds() RPC was returning misleading or incorrect error
codes (for example RPC_INTERNAL_ERROR when the transaction was
not found in the wallet). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
This error code has been replaced with RPC_WALLET_ERROR.
This commit also updates the test cases to explicitly test the error code.
The bumpfee() RPC was returning misleading or incorrect error codes
(for example RPC_INVALID_ADDRESS_OR_KEY when the transaction was not
BIP125 replacable). This commit fixes those error codes:
- RPC_INVALID_ADDRESS_OR_KEY if an invalid address was provided:
- Invalid change address given
- RPC_INVALID_PARAMETER if a single (non-address/key) parameter is incorrect
- confTarget and totalFee options should not both be set.
- Invalid confTarget
- Insufficient totalFee (cannot be less than required fee)
- RPC_WALLET_ERROR for any other error
- Transaction has descendants in the wallet
- Transaction has descendants in the mempool
- Transaction has been mined, or is conflicted with a mined transaction
- Transaction is not BIP 125 replaceable
- Transaction has already been bumped
- Transaction contains inputs that don't belong to the wallet
- Transaction has multiple change outputs
- Transaction does not have a change output
- Fee is higher than maxTxFee
- New fee rate is less than the minimum fee rate
- Change output is too small.
This commit also updates the test cases to explicitly test the error code.
Remove -limitfreerelay and always enforce minRelayTxFee in the mempool (except from disconnected blocks)
Remove -relaypriority, the option was only used for the ability to allow free transactions to be relayed regardless of their priority. Both notions no longer apply.
Previously if an existing watch only key was reimported with a new timestamp,
the new timestamp would not be saved in the key metadata, and would not be used
to update the wallet nTimeFirstKey value (which could cause rescanning to start
at the wrong point and miss transactions).
Issue was pointed out by Jonas Schnelli <dev@jonasschnelli.ch> in
https://github.com/bitcoin/bitcoin/pull/9108#issuecomment-279715550
ad1ae7a Check and enable -Wshadow by default. (Pavel Janík)
9de90bb Do not shadow variables (gcc set) (Pavel Janík)
Tree-SHA512: 9517feb423dc8ddd63896016b25324673bfbe0bffa97f22996f59d7a3fcbdc2ebf2e43ac02bc067546f54e293e9b2f2514be145f867321e9031f895c063d9fb8
d678771 Wallet: Sanitise -wallet parameter (Luke Dashjr)
9756be3 Wallet/RPC: Use filename rather than CWallet pointer, for lockwallet RPCRunLater job name (Luke Dashjr)
86be48a More tightly couple EnsureWalletIsAvailable with GetWalletForJSONRPCRequest where appropriate (Luke Dashjr)
a435632 Move wallet RPC declarations to rpcwallet.h (Luke Dashjr)
ad15734 RPC: Pass on JSONRPCRequest metadata (URI/user/etc) for "help" method (Luke Dashjr)
bf8a04a Reformat touched lines with C++11 (Luke Dashjr)
2e518e3 Move nWalletUnlockTime to CWallet::nRelockTime, and name timed task unique per CWallet (Luke Dashjr)
d77ad6d RPC: Do all wallet access through new GetWalletForJSONRPCRequest (Luke Dashjr)
eca550f RPC/Wallet: Pass CWallet as pointer to helper functions (Luke Dashjr)
Tree-SHA512: bfd592da841693390e16f83b451503eb5cedb71208089aa32b3fc45e973555584a3ed7696dd239f6409324464d565dacf0f3d0e36e8e13ae6a7843848465f960
7ed143c Add test for CWalletTx::GetImmatureCredit() returning stale values. (Russell Yanofsky)
Tree-SHA512: c95088ed6dfc5a0774ddaa2fe14ac0a9ebd830922a4d77100ec3d51fdeb6df40ad97de4f2ea970ed0f4122dcc0022ee1d43ab3c7188becd7f90c1c6af0ed39b7
Change ScanForWalletTransactions return value so it is possible to distinguish
scans that skip reading every block (due to the nTimeFirstKey optimization)
from scans that fail while reading the chainActive.Tip() block. Return value is
now non-null in the non-failing case.
This change doesn't affect any user-visible behavior, it is only an internal
API improvement. The only code currently using the ScanForWalletTransactions
return value is in importmulti, and importmulti always calls
ScanForWalletTransactions with a pindex pointing to the first block in
chainActive whose block time is >= (nLowestTimestamp - 7200), while
ScanForWalletTransactions would only return null without reading blocks when
pindex and every block after it had a block time < (nTimeFirstKey - 7200).
These conditions could never happen at the same time because nTimeFirstKey <=
nLowestTimestamp.
I'm planning to make a more substantial API improvement in the future (making
ScanForWalletTransactions private and exposing a higher level rescan method to
RPC code), but Matt Corallo <git@bluematt.me> pointed out this odd behavior
introduced by e2e2f4c "Return errors from importmulti if complete rescans are
not successful" yesterday, so I'm following up now to get rid of badness
introduced by that merge.
Prior to this commit pindexRescan was initialized to a chainActive.Tip().
However, the value of pindexRescan set at time of initialization was never
read before pindexRescan was being set to either chainActive.Genesis()
(case 1), FindForkInGlobalIndex(chainActive, locator) (case 2) or
chainActive.Genesis() (case 3). Thus, the initialization was redundant.
This commit a.) removes the redundant initialization and b.) simplifies
this logic so that pindexRescan is initialized to chainActive.Genesis()
(case 1 and 3), and set to FindForkInGlobalIndex(chainActive, locator)
(case 2) as needed.
83ac719 Change bitcoin address in RPC helpaddress to an invalid address, so people don't accidentally send coins there (like I did). (Marijn Stollenga)
Tree-SHA512: ca1163466a149d567b97efbfcfa8fdfe2d474245b4dd5a1a92555b4e87f8e99df5fee4cd79ef1ce6a98db2337846af78f37c2e6b31d02008b11fa0e151ce6590
This removes the option from the wallet to not pay a fee on "small"
transactions which spend "old" inputs.
This code is no longer worth keeping around, as almost all miners
prefer not to include transactions which pay no fee at all.
Warnings introduced by commit e2e2f4c "Return errors from importmulti if
complete rescans are not successful" and reported by Pavel Janík
<Pavel@Janik.cz> in https://github.com/bitcoin/bitcoin/pull/9773 and
https://github.com/bitcoin/bitcoin/pull/9827
wallet/test/wallet_tests.cpp: In member function ‘void wallet_tests::rescan::test_method()’:
wallet/test/wallet_tests.cpp:377:17: warning: declaration of ‘wallet’ shadows a global declaration [-Wshadow]
CWallet wallet;
Remove "nLowestTimestamp <= chainActive.Tip()->GetBlockTimeMax()" check from
importmulti, which is always true because nLowestTimestamp is set to the
minimum of the most recent block time and all the imported key timestamps,
which is necessarily lower than the maximum block time.
A new AssertLockHeld(cs_wallet) call was added in commit a58370e
"Dedup nTimeFirstKey update logic" (part of PR #9108).
The lock held assertion will fail when loading prexisting wallets files from
before the #9108 merge that have watch-only keys.
Because it is used inconsistently at least version 5.4.0 of g++ to
complains about methods that don't use override. There is two ways to go
about this: remove override from the methods having it, or add it to the
methods missing it. I chose the second.
When importing a watch-only address over importmulti with a specific timestamp,
the wallet's nTimeFirstKey is currently set to 1. After this change, the
provided timestamp will be used and stored as metadata associated with
watch-only key. This can improve wallet performance because it can avoid the
need to scan the entire blockchain for watch only addresses when timestamps are
provided.
Also adds timestamp to validateaddress return value (needed for tests).
Fixes#9034.
Additionally, accept a "now" timestamp, to allow avoiding rescans for keys
which are known never to have been used.
Note that the behavior when "now" is specified is slightly different than the
previous behavior when no timestamp was specified at all. Previously, when no
timestamp was specified, it would avoid rescanning during the importmulti call,
but set the key's nCreateTime value to 1, which would not prevent future block
reads in later ScanForWalletTransactions calls. With this change, passing a
"now" timestamp will set the key's nCreateTime to the current block time
instead of 1.
Fixes#9491
Minimum boost version was bumped to 1.47.0 in #8920, which
means the configure step won't even pass with older boost.
This version has boost filesystem v3, which means the
(crappy) fallbacks for older versions can go.
Preserve comment, order form, and account strings from the original wallet
transaction. Also set fTimeReceivedIsTxTime and fFromMe fields for consistency
with CWallet::CreateTransaction. The latter two fields don't influence current
wallet behavior, but do record that the transaction originated in the wallet
instead of coming from the network or sendrawtransaction.
More accurate than simply adding one byte per input, and properly handles the
case where the original transaction happened to have very small signatures
4b189c1 Change bumpfee result value from 'oldfee' to 'origfee'. (Alex Morcos)
0c0c63f Introduce WALLET_INCREMENTAL_RELAY_FEE (Alex Morcos)
e8021ec Use CWallet::GetMinimumFee in bumpfee (Alex Morcos)
ae9719a Refactor GetMinimumFee to give option of providing targetFee (Alex Morcos)
fe8e8ef [rpc] Add incremental relay fee to getnetworkinfo (Alex Morcos)
6b331e6 Fix to have miner test aware of new separate block min tx fee (Alex Morcos)
de6400d Fix missing use of dustRelayFee (Alex Morcos)
5b15870 Use incrementalRelayFee for BIP 125 replacement (Alex Morcos)
The result value indicates the actual fee on the transaction that was replaced. But there is an error message which uses the description 'oldfee' to refer to the original fee rate applied to the new transaction's estimated max size. It was confusing that two different uses of 'oldfee' had two different numeric values.
Have wallet's default bump value be higher than the default incrementalRelayFee to future proof against changes to incremental relay fee. Only applies when not setting the fee rate directly.
Use the wallet's fee calculation logic to properly clamp fee against minimums and maximums when calculating the fee for a bumpfee transaction. Unless totalFee is explictly given, in which case, manually check against min, but do nothing to adjust given fee.
In all cases do a final check against maxTxFee (after adding any incremental amount).
7ba0a00 Testing: listsinceblock should not use orphan block height. (Karl-Johan Alm)
ee5c1ce Bug-fix: listsinceblock: use closest common ancestor when a block hash was provided for a chain that was not the main chain. (Karl-Johan Alm)
c9f3062 Add fundrawtransactions new reserveChangeKey option to the release notes (Jonas Schnelli)
9eb325d [QA] Add test for fundrawtransactions new reserveChangeKey option (Jonas Schnelli)
9aa4e6a [Wallet] Add an option to keep the change address key, true by default (Jonas Schnelli)
This command allows a user to increase the fee on a wallet transaction T, creating a "bumper" transaction B.
T must signal that it is BIP-125 replaceable.
T's change output is decremented to pay the additional fee. (B will not add inputs to T.)
T cannot have any descendant transactions.
Once B bumps T, neither T nor B's outputs can be spent until either T or (more likely) B is mined.
Includes code by @jonasschnelli and @ryanofsky
In spite of the name FindLatestBefore used std::lower_bound to try
to find the earliest block with a nTime greater or equal to the
the requested value. But lower_bound uses bisection and requires
the input to be ordered with respect to the comparison operation.
Block times are not well ordered.
I don't know what lower_bound is permitted to do when the data
is not sufficiently ordered, but it's probably not good.
(I could construct an implementation which would infinite loop...)
To resolve the issue this commit introduces a maximum-so-far to the
block indexes and searches that.
For clarity the function is renamed to reflect what it actually does.
An issue that remains is that there is no grace period in importmulti:
If a address is created at time T and a send is immediately broadcast
and included by a miner with a slow clock there may not yet have been
any block with at least time T.
The normal rescan has a grace period of 7200 seconds, but importmulti
does not.
4e7e2e1 Update RPC argument names (John Newbery)
481f289 rpc: Named argument support for bitcoin-cli (Wladimir J. van der Laan)
9adb4e1 rpc: Argument name consistency (Wladimir J. van der Laan)
8d713f7 rpc: Named arguments for rawtransaction calls (Wladimir J. van der Laan)
37a166f rpc: Named arguments for wallet calls (Wladimir J. van der Laan)
78b684f rpc: Named arguments for mining calls (Wladimir J. van der Laan)
b8ebc59 rpc: Named arguments for net calls (Wladimir J. van der Laan)
2ca9dcd test: Add test for RPC named arguments (Wladimir J. van der Laan)
fba1a61 rpc: Named arguments for misc calls (Wladimir J. van der Laan)
286ec08 rpc: Add 'echo' call for testing (Wladimir J. van der Laan)
495eb44 rpc: Named arguments for blockchain calls (Wladimir J. van der Laan)
6f1c76a rpc: Support named arguments (Wladimir J. van der Laan)
5865d41 authproxy: Add support for RPC named arguments (Wladimir J. van der Laan)
5113474 wallet: Use CDataStream.data() (Wladimir J. van der Laan)
e2300ff bench: Use CDataStream.data() (Wladimir J. van der Laan)
adff950 dbwrapper: Use new .data() method of CDataStream (Wladimir J. van der Laan)
a2141e4 streams: Remove special cases for ancient MSVC (Wladimir J. van der Laan)
af4c44c streams: Add data() method to CDataStream (Wladimir J. van der Laan)
On repeated calls to SelectCoins we try to meet the fee necessary for the last transaction, the new fee required might be smaller, so increase our change by the difference if we can.
Once we've picked coins and dummy-signed the transaction to calculate fee, if we don't have sufficient fee, then try to meet the fee by reducing change before resorting to picking new coins.
Performing signing in the inner loop has terrible performance
when many passes through are needed to complete the selection.
Signing before the algorithm is complete also gets in the way
of correctly setting the fee (e.g. preventing over-payment when
the fee required goes down on the final selection.)
Use of the dummy might overpay on the signatures by a couple bytes
in uncommon cases where the signatures' DER encoding is smaller
than the dummy: Who cares?
The meaning is clear from the context, and we're inconsistent here.
Also save typing when using named arguments.
- `bitcoinaddress` -> `address`
- `bitcoinprivkey` -> `privkey`
- `bitcoinpubkey` -> `pubkey`
Fee estimation can just check its own mapMemPoolTxs to determine the same information. Note that now fee estimation for block processing must happen before those transactions are removed, but this shoudl be a speedup.
5394b39 Wallet: Split main logic from InitLoadWallet into CreateWalletFromFile (Luke Dashjr)
fb0c934 Wallet: Let the interval-flushing thread figure out the filename (Luke Dashjr)
cee1612 reduce number of lookups in TransactionWithinChainLimit (Gregory Sanders)
af9bedb Test for fix of txn chaining in wallet (Gregory Sanders)
5882c09 CreateTransaction: Don't return success with too-many-ancestor txn (Gregory Sanders)
0b2294a SelectCoinsMinConf: Prefer coins with fewer ancestors (Gregory Sanders)
This change removes a mapValue.erase("version") statement which deletes a
mapValue entry that never existed. The statement was mistakenly added in commit
865c3a2383 in 2010 and is harmless but confusing.
