86cddf0856 doc: add detached release notes for #14060 (mruddy)
Pull request description:
Adding detached release notes for #14060 in order to assist with https://github.com/bitcoin/bitcoin/pull/14688.
Tree-SHA512: 170cd0b6ac27237f58875f301132e0695dee36eec5d90a0c1234c0fa9db125151e6cebd94e63e634ddc4ddcfb77d7a4a07434ffd3725cb0dfa13fc4ccfbde2a0
ba8f0c6c8d Release notes: integrate detached release notes (David A. Harding)
6062f0e613 Release notes: update notes through to 11e1ac3ae0 (David A. Harding)
Pull request description:
This documents changes listed by `git log v0.17.0...11e1ac3 --merges` and integrates the existing detached release notes into the main file.
My goal is to update the release notes each month in order to reduce the amount of writing and review that needs to be done all at once near the start of the RC cycle.
Note: I've chosen to use fully-qualified URLs for linking to documentation, rather than shorter relative URLs that would otherwise be preferred, as the release notes are commonly copied into emails, reddit threads, and blog posts where relative URLs would be incomplete or would point to the wrong page.
Tree-SHA512: a943327d48e166f4a188ab0f468972609276e9c8f0ed85513823511ed989606445bf6b0ae9dd693b5d1e13d2f98c13573acd13865c57fe9c8ee9dbd04ceeff7f
a6b5ec18f rpc: creates possibility to preserve labels on importprivkey (marcoagner)
Pull request description:
Closes#13087.
As discussed in the issue, this is a feature request instead of a bug report since the behaviour was as intended (i.e. label with default: `''`). With this, the old behaviour is kept while the possibility to achieve the preservation of labels, as expected in the open issue, is added.
Tree-SHA512: b33be50e1e7f62f7ddfae953177ba0926e2d848961f9fac7501c2b513322c0cb95787745d07d137488267bad1104ecfdbe800c6747f94162eb07c976835c1386
a4edb168b6 ZMQ: add options to configure outbound message high water mark, aka SNDHWM (mruddy)
Pull request description:
ZMQ: add options to configure outbound message high water mark, aka SNDHWM
This is my attempt at https://github.com/bitcoin/bitcoin/pull/13315
Tree-SHA512: a4cc3bcf179776899261a97c8c4f31f35d1d8950fd71a09a79c5c064879b38e600b26824c89c4091d941502ed5b0255390882f7d44baf9e6dc49d685a86e8edb
33ae985912 doc: Update OpenBSD build guide for 6.4 (fanquake)
6d247b1148 gitignore contents of db4 folder (Marty Jones)
Pull request description:
Includes a commit from #14314.
The `disable-dependency-tracking ` workaround is still required to run `./configure` (cc #14404).
`gmake check -j4` pass.
`src/bitcoind` runs and "starts" syncing.
Tree-SHA512: 72d78eb0d94fc4f2bbcf901d867f10f0e85d8a4f43969c598953278343ed826a26d1ebe6772dcc0fbd1fc608e88b7c86e31656232c1efb0656c537176fb9de4c
14a06525b2 tests: add test for 'getaddressinfo' RPC result 'ischange' field (whythat)
93d1aa9abc rpcwallet: add 'ischange' field to 'getaddressinfo' response (whythat)
Pull request description:
Implementation of proposal in #14396.
This introduces `CWallet::IsChange(CScript&)` method and replaces original `CWallet::IsChange(CTxOut&)` method with overloaded version that delegates to the new method with *txout*'s `scriptPubKey`. In this way `TODO` note from the original method can still be addressed in a single place.
Tree-SHA512: ef5dbc82d76b4b9b2fa6a70abc3385a677c55021f79e187ee2f392ee32bc6b406191f4129acae5c17b0206e72b6712e7e0cad574a4bbd966871c2e656c45e041
9605bbd315 Make clear function argument case in dev notes (Carl Dong)
Pull request description:
Rationale:
For new developers, they might be confused if they see that function arguments are sometimes `camelCase`'d in the codebase. This makes it clear that they _should_ be `snake_case`'d (maybe because no one's gotten to fixing them yet).
Tree-SHA512: 9db16d1fedf9761121844a0865ae3fefea94b5dbdfb36cb18f99cbc73e117f7d798a019f28a1c8bca19772502de2f9ed063f03bd911ffc4d248ec7386cd87d97
0a04667613 FreeBSD: Document Python 3 requirement for 'gmake check' (Murray Nesbitt)
Pull request description:
`doc/build-freebsd.md` doesn't mention that Python 3 is required to run the test suite. Currently, `gmake check` fails without it.
Tree-SHA512: 19117671bf528d335146d821e5cd4108f2f6ae014fb9a6d0030a322b23d1bc5f677e46896b575a7ca78b137315b60e63ad8b03ad695fe0aae3e9f50b060a3561
c11875c590 Add segwit address tests for importmulti (MeshCollider)
201451b1ca Make getaddressinfo return solvability (MeshCollider)
1753d217ea Add release notes for importmulti segwit change (MeshCollider)
353c064596 Fix typo in test_framework/blocktools (MeshCollider)
f6ed748cf0 Add SegWit support to importmulti with some ProcessImport cleanup (MeshCollider)
Pull request description:
Add support for segwit to importmulti, supports P2WSH, P2WPKH, P2SH-P2WPKH, P2SH-P2WSH. Adds a new `witnessscript` parameter which must be used for the witness scripts in the relevant situations.
Also includes some tests for the various import types.
~Also makes the change in #14019 redundant, but cherry-picks the test from that PR to test the behavior (@achow101).~
Fixes#12253, also addresses the second point in #12703, and fixes#14407
Tree-SHA512: 775a755c524d1c387a99acddd772f677d2073876b72403dcfb92c59f9b405ae13ceedcf4dbd2ee1d7a8db91c494f67ca137161032ee3a2071282eeb411be090a
5918204304 Removed explicit mention of storage requirement (squashed) (Martin Erlandsson)
Pull request description:
Similarly discussed and fixed in the following bitcoin.org issue: https://github.com/bitcoin-dot-org/bitcoin.org/pull/2716
Tree-SHA512: 3d1e0b1e70c2e2a5003f437c7deba8bc72f487852948c298db154aaf29184fa407e122ab7fdff9bfb4e52cc6062bc2d2122bbbdf805283aed21aa685cf29681c
Similarly discussed and fixed in the following bitcoin.org issue: https://github.com/bitcoin-dot-org/bitcoin.org/pull/2716
Removed mention of storage requirement
Agreeing with @laanwj that this mention of the storage requirement could be removed, I did so and changed the wording accordingly.
Would be nice to be able to add a link to a canonical source that is always updated, for those who want a number.
Update doc/README.md
Co-Authored-By: merland <martin@megabit.se>
Update README.md
added a missing 'a'
eeeaa29214 descriptors.md: Refer to descriptors as describing instead of matching (Russell Yanofsky)
eb49412562 doc/descriptors.md tweaks (Russell Yanofsky)
Pull request description:
Add some implementation details, and tweak phrasing in examples section to be more explicit about how expressions are used for matching.
Tree-SHA512: a9dc7bc0fc370548189a789f31c04bd11103cdd2a99bcb909fa1b1dfa4e78509813dad5d5c9e3db98d66929f45cb5704f5c46ab4cbd800fef22cd8465f80ef33
1fb3c167c3 Add `doc/bitcoin-conf.md` (Hennadii Stepanov)
Pull request description:
From the IRC:
> 2018-10-16T05:35:03 \<wumpus\> if something can be solved by better documentation, please work on documentation!
> 2018-10-16T05:35:12 \<wumpus\> don't change the code instead
Refs:
- #14370
- #14427
- #14494
Based on the BITCOIN.CONF(5) manual page written by Micah Anderson \<micah@debian.org\> for the Debian system.
Tree-SHA512: 16393c9073c027fa1c46f8b59651e60b9a3159b3aeb9b3102040c292d2787f32b1ead5977957ac3ac0759a4bf626650a2325b68ad84320964ac089ffc2d3b4f4
b6b9915318 Textual improvements (Martin Erlandsson)
Pull request description:
Just added a few commas in the right places, to increase readability.
(Also, getting my feet wet in regards to the contribution process...)
Tree-SHA512: 9281af792436efe916e898b34fe20e909291d0c0917e8ccdc4a2af78cf9b6ba7736c554e53b6dbe1d9392b7583b33c3d77b769ab6424c3d7a65513535811878c
d56a068935 docs: Add release notes for listwalletdir RPC (João Barbosa)
0cb3cad166 qa: Add tests for listwalletdir RPC (João Barbosa)
cc3377360c rpc: Add listwalletdir RPC (João Barbosa)
d1b03b8e5f interfaces: Add getWalletDir and listWalletDir to Node (João Barbosa)
fc4db35bfd wallet: Add ListWalletDir utility (João Barbosa)
Pull request description:
`ListWalletDir` returns all available wallets in the current wallet directory.
Based on MeshCollider work in pull #11485.
Tree-SHA512: 5843e3dbd1e0449f55bb8ea7c241a536078ff6ffcaad88ce5fcf8963971d48c78600fbc4f44919523b8a92329d5d8a5f567a3e0ccb0270fdd27366e19603a716
3b706212ad doc: RPC documentation (Karel Bílek)
Pull request description:
The auto-generated RPC docs seem to work so far ( https://bitcoincore.org/en/doc/ + 0.17.0 https://github.com/bitcoin-core/bitcoincore.org/pull/618 ). There are some problems (the design of the list on the right is not ideal, and apparently the huge list of pages slows down jekyll), but that can be fixed later; people are already linking to the docs now and looking for them there
So I am adding the RPC docs to the release process.
The script is here and it is written in golang, since I am most confident in the language; if necessary, I can try to rewrite to python, which is more common in bitcoin tooling
https://github.com/bitcoin-core/bitcoincore.org/tree/master/contrib/doc-gen
Tree-SHA512: ba1b7696bb7ceb6cee4ff222b006b8c18768dd9283a4130751714a782d75ea2ca33f8d9fc4a5263d85a2f001c254daa0cee3b09cc7cba7366c66c5a115d8352a
- Creates m_assumed_blockchain_size and m_assumed_chain_state_size on CChainParams.
- Implements access to CChainParams' m_assumed_blockchain_size and m_assumed_chain_state_size on node interface.
- Implements m_assumed_blockchain_size and m_assumed_chain_state_size on qt/intro via node interface.
- Updates release process document with the new CChainParam's values.
- changes importprivkey behavior to overwrite existent label if one
is passed and keep existing ones if no label is passed
- tests behavior of importprivkey on existing address labels and
different same key destination
fad95e8da6 doc: Split build linux dependencies (MarcoFalke)
0000009015 doc: Split depends installation instructions per arch (MarcoFalke)
Pull request description:
The current depends installation instructions fail on bionic with
```
E: Unable to locate package g++-4.8-aarch64-linux-gnu
E: Unable to locate package gcc-4.8-aarch64-linux-gnu
E: Unable to locate package g++-4.8-arm-linux-gnueabihf
E: Unable to locate package gcc-4.8-arm-linux-gnueabihf
```
Also, they fail due to missing dependencies `make automake cmake pkg-config python3`
Fix this by removing the explicit version and splitting them into common instructions and instructions per linux architecture.
Tree-SHA512: 25d5efa7450a0b1bbd569f431158f5a25bf4fe34f6adc32ebdfd6b6db9447ce083f555f20ff5b9f7c458864986c15d65219a31a1cd2b18bad9965ece2ea5e3be
not that temporary anymore
Tree-SHA512: c44bfca71573b3d70001d339138715fc6fbceae2e370f2e1e8ba5bdfdb19e8ec4b0a59d45ff8565e0f784d4659f51e8089a6d892a73362b428d8a98097fc8532
a2a04a5abb Bugfix: Only run bitcoin-tx tests when bitcoin-tx is enabled (Luke Dashjr)
92af71cea9 configure: Make it possible to build only one of bitcoin-cli or bitcoin-tx (Luke Dashjr)
Pull request description:
Includes #5618 (which the reasons for rejecting no longer hold true)
Tree-SHA512: f30a8e4a2f70166b7cabef77c4674163b3a9da14c6a547d34f00d1056a19bf4d23e22851eea726fad2afc8735d5473ae91122c770b65ac3886663dc20e2c5b70
7ac911afe7 [docs] Add release notes for removing `-usehd` (John Newbery)
25548b2958 [wallet] Remove -usehd (John Newbery)
Pull request description:
`-usehd` is no longer used (except to tell the user that they've set it incorrectly for the wallet that they're loading). Remove it (in the same spirit as #14272)
Tree-SHA512: 5bdcd2bb9bb8504a01343595bcd1bd433d97b730255152c725103c1ac3fa3a9d9e5220a4c29d4c72307cf803e1c09d31080f83603c23dc77263846e17b1826f0
b6718e373e tests: Use MakeUnique to construct objects owned by unique_ptrs (practicalswift)
Pull request description:
A subset of #14211 ("Use MakeUnique to construct objects owned by unique_ptrs") as suggested by @MarcoFalke in https://github.com/bitcoin/bitcoin/pull/14211#issuecomment-423324019.
Use `MakeUnique` to construct objects owned by `unique_ptr`s.
Rationale:
* `MakeUnique` ensures exception safety in complex expressions.
* `MakeUnique` gives a more concise statement of the construction.
Tree-SHA512: 1228ae6ce7beb178d79142c4e936b728178ccaa8aa35c6d8feeb33d1a667abfdd010c59996a9d833594611e913877ce5794e75953d11d9b1fdbac04aa491d9cf
a2eb6f5405 [rpc] Add getnodeaddresses RPC command (chris-belcher)
Pull request description:
Implements issue https://github.com/bitcoin/bitcoin/issues/9463
New getnodeaddresses call gives access via RPC to the peers known by the node. It may be useful for bitcoin wallets to broadcast their transactions over tor for improved privacy without using the centralized DNS seeds. getnodeaddresses is very similar to the getaddr p2p method.
Please advise me on the best approach for writing an automated test. By my reading the getaddr p2p method also isn't really tested.
Tree-SHA512: ad03abf518847476495b76a2f5394b8030aa86654429167fa618e21460abb505c10ef9817ec1b80472320d41d0aff5dc94a8efce023aaaaf5e81386aa92b852b
New getnodeaddresses call gives access via RPC to the peers known by
the node. It may be useful for bitcoin wallets to broadcast their
transactions over tor for improved privacy without using the
centralized DNS seeds. getnodeaddresses is very similar to the getaddr
p2p method.
Tests the new rpc call by feeding IP address to a test node via the p2p
protocol, then obtaining someone of those addresses with
getnodeaddresses and checking that they are a subset.
f1bd03eb01 [depends, zmq, doc] upgrade zeromq to 4.2.5 and avoid deprecated zeromq api functions (mruddy)
Pull request description:
Upgrade the ZeroMQ dependency from version 4.2.3 to the latest stable version 4.2.5.
This PR Follows the lead of https://github.com/bitcoin/bitcoin/pull/11986.
I upgraded both patch files to correspond to the version `4.2.5` libzmq files.
I assume doing so is still necessary and correct.
Without updating the patch line numbers, things appear to work, but you get extra log messages while building `depends` because things don't exactly match, e.g.:
```
/bitcoin/depends> make zeromq
Extracting zeromq...
/bitcoin/depends/sources/zeromq-4.2.5.tar.gz: OK
Preprocessing zeromq...
patching file src/windows.hpp
Hunk #1 succeeded at 58 (offset 3 lines).
patching file src/thread.cpp
Hunk #1 succeeded at 307 with fuzz 2 (offset 87 lines).
Hunk #2 succeeded at 323 with fuzz 2 (offset 90 lines).
```
Updating the patches seemed cleaner, so I did it. Note that libzmq had some whitespace changes, so that's why the updated patches do too.
More info: https://github.com/zeromq/libzmq/releases/tag/v4.2.5
tags: libzmq, zmq, 0mq
Tree-SHA512: 78659dd276b5311e40634b1bbebb802ddd6b69662ba3c84995ef1e3795c49a78b1635112c7fd72a405ea36e2cc3bdeb84e6d00d4e491a349bba1dafff50e2fa5
faea5bfc5a doc: release notes for -enablebip61 default change (MarcoFalke)
fa14b54a87 p2p: Disable BIP 61 by default (MarcoFalke)
Pull request description:
The live p2p network should not be used for debugging or as development aid when implementing the p2p protocol. Instead, applications should be tested locally (e.g. by inspecting the debug log of a validating node on the local network)
Using the p2p network for this purpose seems wasteful and even dangerous, as peers can not be trusted to send the correct reject messages or a reject message at all.
Tree-SHA512: 9c91ad035b5110942172a3b4b8a332a84e0c0aa9ee80f8134aeab63e66ac604841e68b04038681c288b716e5e0cbe38065eb5c7eb63fa72c3bdb3255a4b2d99d
e351a16a2a Remove reference to deprecated RPC call in build instructions (Michael Goldstein)
a6f16f1b1a Docs: Add disable-wallet section to OSX build instructions (Michael Goldstein)
Pull request description:
The `disable-wallet` section was mentioned in the `Berkeley DB` section of the OSX build instructions, but the section did not actually exist. This PR ports the section from the Unix build instructions.
Tree-SHA512: e32f10f3b92307325f2101e89d3e18c89346916e70117c208ad7441170c4aee65b636ea4f7dd1cb0ecf0e800c1aa7c37fa73125e69ecdd539bc862e651b79b16
This commit does the following changes:
- [wallet] Remove 'account' argument from GetLegacyBalance()
- GetLegacyBalance() is never called with an account argument.
Remove the argument and helper functions.
- [wallet] Remove CWallet::ListAccountCreditDebit()
- Function no longer used.
- [wallet] Remove AccountMove()
- Function no longer used.
- [wallet] Remove AddAccountingEntry()
- Function no longer used.
- [wallet] Remove GetAccountCreditDebit()
- Function no longer used.
- [wallet] Don't rewrite accounting entries when reordering wallet transactions.
- Accounting entries are deprecated. Don't rewrite them to the wallet
database when re-ordering transactions.
- [wallet] Remove WriteAccountingEntry()
- Function no longer used.
- [wallet] Don't read acentry key-values from wallet on load.
- [wallet] Remove ListAccountCreditDebit()
- Function no longer used.
- [wallet] Remove CAccountingEntry class
- No longer used
- [wallet] Remove GetLabelDestination
- Function no longer used.
- [wallet] Delete unused account functions
- ReadAccount
- WriteAccount
- EraseAccount
- DeleteLabel
- [wallet] Remove fromAccount argument from CommitTransaction()
- [wallet] Remove strFromAccount.
- No longer used.
- [wallet] Remove strSentAccount from GetAmounts().
- No longer used.
- [wallet] Update zapwallettxes comment to remove accounts.
- [wallet] Remove CAccount
- No longer used
- [docs] fix typo in release notes for PR 14023
19efc01aec Add PSBT documentation (Pieter Wuille)
Pull request description:
This is just some initial text to get going; other contributions welcome.
I'd like to include other workflows, such as hardware wallets and (manual) coinjoins. However, the former will in practice require PSBT interfaces for existing hardware devices, and the second can really use some extra RPCs first.
Tree-SHA512: 951e475e31bb2ea9ab5d84d139b8bc436153ad035185f00ad1d56afc0c6f7c4de8176a785a6d0c38bb3fd9cbf318e513e1a032e83e1da99ded5d43a36f9cbc60
Now that 0.17 branch has been split off, master is 0.17.99 (pre-0.18).
Also clean out release notes.
Tree-SHA512: bb20025d3ead3346afc7a6a51af715783e705e1de9d1b90ced6423d8969d64e42b72d06a1eb853083b11e9cfe674775266792ae2cd18ed6c858938e125edab03
3fc20632a3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28 Regenerate manpages (DrahtBot)
eb7daf4d60 Update copyright headers to 2018 (DrahtBot)
Pull request description:
Some trivial maintenance to avoid having to do it again after the 0.17 branch off.
(The scripts to do this are in `./contrib/`)
Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa
a9e898a4ad docs: Link to python style guidelines from developer notes (Mason Simon)
Pull request description:
Initially I moved the python style guidelines from the functional test README, but some of the python rules are test-specific, and most of the developer notes doc is C++ centric, so just dropping a link seemed better.
Tree-SHA512: 9d4d5cc45526319a118595d90fcfad2c9aced22007aa096d8af04ba1b963312822804f4c15b0b227d66af49565034437691b7760e7ff6d1e3f8b10b898906362
95464c7519 doc: Improve command to generate list of authors for release notes (Mitchell Cash)
1c22cc1af1 doc: Update broken links to now point to gitian-build.py (Mitchell Cash)
Pull request description:
- Update broken links
- Improve command to generate list of authors for a release
---
I also note that it asks to ping **wumpus** on IRC, to assist in generating a list of merged pulls and sort them into categories based on labels. I tried to turn this into a simple one-liner as well (something like ``git log --merges --format="- \`%h\` %s (%an)" v0.16.0..v0.16.1``), but it didn't seem to capture everything I needed.
Would it be worthwhile **wumpus** open-sourcing his code into `contrib/devtools` so there is no single point of failure (even if it can manually be worked around).
Tree-SHA512: 8e7f0880ff07ce8fe67b74de3f2c4b78dafe2c95eefb0617fa319ff196232967cb22ee75a183a39f93bfc6e0bf85547689160139312cee5956af2c069b8a3b6a
f447a0a707 Remove program options from build system (Chun Kuan Lee)
11588c639e Replace boost program_options (Chun Kuan Lee)
Pull request description:
Concept from #12744, but without parsing negated options.
Tree-SHA512: 7f418744bb8934e313d77a5f162633746ef5d043de802b9c9cd9f7c1842e7e566eb5f171cd9e2cc13317281b2449c6fbd553fa4f09b837e6af2f5d2b2aabdca2
- Remove dependency on sed (sed was overkill when you can just add plain
text to the git log --format command)
- Sort resulting list of authors alphabetically (case-insensitive)
- Provide an example of how to only generate authors between versions
801cb307b5 doc: Add release notes for -printtoconsole and -debuglogfile changes (Samuel B. Atwood)
Pull request description:
This adds release notes relevant to the changes in #13004 and documented in command line help in #13614.
Tree-SHA512: ff320415afa9be1ace37ebf0a69ee5a7e6d4167465bc41111be062a556da9b8accfc39553fac610e68521c7ab2095126ace4f012a32f5e9f37cbec39cfa74b04
