d3661a3fd2 [Doc] add missing newline to witnessScript in listunspent help (David A. Harding)
Pull request description:
Tree-SHA512: 85bb9c693bac36da0239eb6a1f42c2173d0170d5ff3d4c2fcd8897cfab233ef8c8ebc1eb5591e3dc89d091fde221d77c872f14a1eec201fee4dc83ba788390c3
fd637be8d2 Add checksums to descriptors.md (Pieter Wuille)
be62903c41 Make descriptor checksums mandatory in deriveaddresses and importmulti (Pieter Wuille)
b52cb63688 Add getdescriptorinfo to compute checksum (Pieter Wuille)
3b40bff988 Descriptor checksum (Pieter Wuille)
Pull request description:
This adds support for a descriptor-specific 8-character checksum.
Descriptors may optionally be suffixed with a `#` plus these 8 checksum characters. Any descriptor that contains a `#` at the end must be followed by a valid checksum. If the `#` is missing entirely, it is valid without checksum.
All RPCs are updated to report descriptors that include the checksum. On input, they are optional except in `deriveaddress` and `importmulti`, which require descriptors which include a checksum.
A new RPC is also added to analyse descriptors (`getdescriptorinfo`), which can be used to compute the checksum for a descriptor without.
Tree-SHA512: a8294b09155eb6c67fbc178b5e2d3fbc0e9bec8b6de57a13f8835550d51c2cb32a428b3c9a188ded42b454d594e9305edbd4797906b755de77a8f33c79165f6b
540729ef4b Implement analyzepsbt RPC and tests (Andrew Chow)
77542cf2a5 Move PSBT UTXO fetching to a separate method (Andrew Chow)
cb40b3abd4 Figure out what is missing during signing (Andrew Chow)
08f749c914 Implement joinpsbts RPC and tests (Andrew Chow)
7344a7b998 Implement utxoupdatepsbt RPC and tests (Andrew Chow)
Pull request description:
This PR adds 3 new utility RPCs for interacting with PSBTs.
`utxoupdatepsbt` updates a PSBT with UTXO information from the node. It only works with witness UTXOs because full transactions (as would be needed for non-witness UTXOs) are not available unless txindex is enabled.
`joinpsbts` joins the inputs from multiple distinct PSBTs into one PSBT. e.g. if PSBT 1 has inputs 1 and 2, and PSBT 2 has inputs 3 and 4, `joinpsbts` would create a new PSBT with inputs 1, 2, 3, and 4.
`analyzepsbt` analyzes a PSBT and determines the current state of it and all of its inputs, and the next step that needs to be done.
Tree-SHA512: 3c1fa302201abca76a8901d0c2be7b4ccbce334d989533c215f8b3e50e22f2f018ce6209544b26789f58f5980a253c0655111e1e20d47d5656e0414c64891a5c
When signing an input, figure out what was requested for but was unable
to be found and store it in a SignatureData.
Return this information in SignPSBTInput.
fa178a6385 [rpc] mining: Omit uninitialized currentblockweight, currentblocktx (MarcoFalke)
Pull request description:
Previously we'd report "0", which could be mistaken for a valid number. E.g. the number of transactions is 0 or the block weight is 0, whatever that means.
Tree-SHA512: ee94ab203a329e272211b726f4c23edec4b09c650ec363b77fd59ad9264165d73064f78ebb9e11b5c2c543b73c157752410a307655560531c7d5444d203aa0ea
Adds a new option to importmulti where the pubkeys specified in the import
object can be added to the keypool. This only works if the wallet has
private keys disabled.
When private keys are disabled, still fetch keys from the keypool
if the keypool has keys. Those keys come from importing them and
adding them to the keypool.
cb3511b9d Add release notes for importing key origin info change (Andrew Chow)
4c75a69f3 Test importing descriptors with key origin information (Andrew Chow)
02d6586d7 Import KeyOriginData when importing descriptors (Andrew Chow)
3d235dff5 Implement a function to add KeyOriginInfo to a wallet (Andrew Chow)
eab63bc26 Store key origin info in key metadata (Andrew Chow)
345bff601 Remove hdmasterkeyid (Andrew Chow)
bac8c676a Add a method to CWallet to write just CKeyMetadata (Andrew Chow)
e7652d3f6 Add WriteHDKeypath function and move *HDKeypath to util/bip32.{h,cpp} (Andrew Chow)
c45415f73 Refactor keymetadata writing to a separate method (Andrew Chow)
Pull request description:
This PR allows for key origin data as defined by the descriptors document to be imported to the wallet when importing a descriptor using `importmulti`. This allows the `walletprocesspsbt` to include the BIP 32 derivation paths for keys that it is watching that are from a different HD wallet.
In order to make this easier to use, a new field `hdmasterkeyfingerprint` has been added to `getaddressinfo`. Additionally I have removed `hdmasterkeyid` as was planned. I think that this API change is fine since it was going to be removed in 0.18 anyways. `CKeyMetadata` has also been extended to store key origin info to facilitate this.
Tree-SHA512: 9c7794f3c793da57e23c5abbdc3d58779ee9dea3d53168bb86c0643a4ad5a11a446264961e2f772f35eea645048cb60954ed58050002caee4e43cd9f51215097
Store the master key fingerprint and derivation path in the
key metadata. hdKeypath is kept to indicate the seed and for
backwards compatibility, but all key derivation path output
uses the key origin info instead of hdKeypath.
fa535af92c fuzz: test_runner: Better error message when built with afl (MarcoFalke)
fa7ca8ef58 qa: Add test/fuzz/test_runner.py (MarcoFalke)
Pull request description:
Can be run with `./test/fuzz/test_runner.py` after building as described in `doc/fuzzing.md`
Tree-SHA512: f6a3cd8165ec2de4b363be4fd0a936b4a60829cce923f93fe5d6a046b1bbd64c959cdf790440bf70c0e13b0bb1b956a746a24c6fd92bddeab15b837ed50ffad2
6ca836ab3a Add release note for listunspent P2WSH change (MeshCollider)
928beae007 Add test for P2SH-P2WSH in signrawtransactionwithkey and listunspent (MeshCollider)
314784a60f Make listunspent and signrawtransaction RPCs support witnessScript (MeshCollider)
Pull request description:
This is a reworked version of #11708 after #12427 and the `signrawtransaction` split.
For a P2WSH address, listunspent should return the witness script, and for a P2SH-P2WSH address, it should also return the inner witness script (because SignTransaction will automatically wrap it in P2SH if required).
Includes a test which also tests the behaviour of #12427, and release note.
Tree-SHA512: a8e72cf16930312bf48ec47e44a68f8d7e26664043c1b4cc0983eb25aec4087e511188ff9a0f181cd7b8a0c068c60d7f1e7e3f226b79e8c48890039dcf57f7b7
7257353b93 Select orphan transaction uniformly for eviction (Pieter Wuille)
Pull request description:
The previous code was biased towards evicting transactions whose txid has a larger gap (lexicographically) with the previous txid in the orphan pool.
Tree-SHA512: e35f700aea5ed79d1bc57f64bffcb623424b40156fd0a12f05f74f981a8aa4175d5c18d042989243f7559242bdf1d6d720bcf588d28f43d74a798a4843f09c70
fd46c4c00 Bump minimum Qt version to 5.5.1 (Sjors Provoost)
Pull request description:
Fixes#13478
Compiled and lightly tested on 10.14.3 against QT 5.12.0.
Tree-SHA512: 6890331969bbf4c66dc0993b8817b1f0831d008f5863554e9c09a38f4700260b84044ff961664c377decc9fb8300e3543c267f935ec64fbc97b20f8fb396247a
84f53154e Travis: Add test without BIP70 (but still full wallet + tests) (Luke Dashjr)
113f0004b GUI: If BIP70 is disabled, give a proper error when trying to open a payment request file (Luke Dashjr)
9975282fa GUI: If BIP70 is disabled, attempt to fall back to BIP21 parsing (Luke Dashjr)
Pull request description:
Tree-SHA512: 66a684ce4336d0eac8b0107b405ff3a2cf312258a967f3e1b14734cd39db11e2db3e9b03492755583170d94d54754ef536b0776e5f19a0cc2caca8379eeb4495
Creates new files util/bip32.h and util/bip32.cpp for containing
BIP 32 stuff.
Moves FormatKeyPath from descriptor.cpp to util/bip32.
Adds a wrapper around it to prepent the 'm' for when just the
BIP 32 style keypath is needed.
This commit was a fix to `m_assumed_blockchain_size` reverted from
3fc2063's 220 to 9d0e528's 200 since work on 9d0e528 was being done in
parallel and ended up reverting `m_assumed_blockchain_size`.
This commits is now a intended to be a bump of
`m_assumed_blockchain_size` for both mainnet and testnet for new
reasonable values.
102faad81 Factor out combine / finalize / extract PSBT helpers (Glenn Willen)
78b9893d0 Remove op== on PSBTs; check compatibility in Merge (Glenn Willen)
bd0dbe876 Switch away from exceptions in refactored tx code (Glenn Willen)
c6c3d42a7 Move PSBT definitions and code to separate files (Glenn Willen)
81cd95884 Factor BroadcastTransaction out of sendrawtransaction (Glenn Willen)
c734aaa15 Split DecodePSBT into Base64 and Raw versions (Glenn Willen)
162ffefd2 Add pf_invalid arg to std::string DecodeBase{32,64} (Glenn Willen)
Pull request description:
* Move most PSBT definitions into psbt.h.
* Move most PSBT RPC utilities into psbt.{h,cpp}.
* Move wallet-touching PSBT RPC utilities (FillPSBT) into
wallet/psbtwallet.{h,cpp}.
* Switch exceptions from JSONRPCError() to new PSBTException class.
* Split DecodePSBT into DecodeBase64PSBT (old behavior) and DecodeRawPSBT.
* Add one new version of DecodeBase64 utility in strencodings.h (and
corresponding DecodeBase32 for completeness).
* Factor BroadcastTransaction utility function out of sendrawtransaction RPC
handler in rpc/rawtransaction.cpp
Note: For those keeping score at home wondering why refactor, this is in anticipation of (and developed in parallel with) a change to actually introduce GUI use of all this stuff, which is already under development and working-ish.
Tree-SHA512: 2197c448e657421f430943025357597e7b06c4c377d5d4b2622b9edea52a7193c48843dd731abb3a88ac4023a9c88d211991e0a9b740c22f2e1cbe72adefe390
318b1f7af1 [wallet] Close bdb when flushing wallet. (John Newbery)
Pull request description:
bdb would not be closed when closing the wallet in wallet-tool. Fix this by calling wallet->flush with true.
Tree-SHA512: f722e527e4806eca5254221e944f57853d11bf89a9264309fa558a6cc2b23feefb7bb2963e87b4fad9cfb31ac4cffe563688988e0614a481a8ff1d393aceb132
5039e4b61b Remove unnecessary const_cast (Julian Fleischer)
Pull request description:
The const_cast
```C++
CBlock &block = const_cast<CBlock&>(chainparams.GenesisBlock());
```
is not necessary as all the functions invoked form this block receive a `const CBlock&` anyway. Simply add the `const` to `block`:
```C++
const CBlock& block = chainparams.GenesisBlock();
```
Casting away `const`, especially from something as precious as the genesis block, feels really weird to me as a reader of bitcoin-core source code.
Tree-SHA512: 0290b2cabb216a60655ded153ed1f213c051fb216cec6f3f810f8b760e276f8def86eb696c492e89631682531e215f56d7897b59685d3aa787bcd80cc4f86c90
fa0ad4e7ce RPCHelpMan: Check default values are given at compile-time (MarcoFalke)
Pull request description:
Remove the run time assertions on the default values and ensure that the correct default type and value is provided at compile time.
Tree-SHA512: 80df2f3fab4379b500c773c27da63f22786c58be5963fe99744746320e43627a5d433eedf8b32209158df7805ebdce65ed4d242c829c4fe6e5d13deb4799ed42
1951ea434 gui: Show indeterminate progress dialog while opening walllet (João Barbosa)
8847cdaaa gui: Add OpenWalletActivity (João Barbosa)
4c8982a88 interfaces: Avoid interface instance if wallet is null (João Barbosa)
be82dea23 gui: Add thread to run background activity in WalletController (João Barbosa)
6c49a55b4 gui: Add Open Wallet menu (João Barbosa)
32a8c6abf gui: Add openWallet and getWalletsAvailableToOpen to WalletController (João Barbosa)
ab288b4e5 interfaces: Add loadWallet to Node (João Barbosa)
17abc0fd5 wallet: Factor out LoadWallet (João Barbosa)
Pull request description:
The *Open Wallet* menu has all the available wallets currently not loaded. The list of the available wallets comes from `listWalletDir`.
In the future the menu can be replaced by a custom dialog.
<img width="674" alt="screenshot 2019-01-12 at 12 17 02" src="https://user-images.githubusercontent.com/3534524/51073166-ac041480-1664-11e9-8302-be81702bc146.png">
Tree-SHA512: ebfd75eee0c8264863748899843afab67dadb7dff21313c11e3cb5b6108d954978dd1f1ae786bc07580c5a771ea4ab38d18c1643c9b9b3683ed53f0f6c582e38
a99999cc04 util: Add SetupHelpOptions() (MarcoFalke)
Pull request description:
Every binary we have sets up the help option in their own way and wording.
Solve that by having one function take care of it for all of them.
Tree-SHA512: 6e947fa8bc2a46fa6ca9f45777020aa269a5df0dd916ebc863224f9a1e0f79e8e7754a1478567307edd9461e8babd77d26bc2710bbd56e8f8da9020aa85a8c9c
Refactor the new CombinePSBT, FinalizePSBT, and FinalizeAndExtractPSBT
general-purpose functions out of the combinepsbt and finalizepsbt RPCs,
for use in the GUI code.
Remove the op== on PartiallySignedTransaction, which only checks that the
CTransactions are equal. Instead, check this directly in Merge, and return
false if the CTransactions are not equal (so the PSBTs cannot be merged.)
After refactoring general-purpose PSBT and transaction code out of RPC code,
for use in the GUI, it's no longer appropriate to throw exceptions. Instead we
now return bools for success, and take an output parameter for an error object.
We still use JSONRPCError() for the error objects, since only RPC callers
actually care about the error codes.
Move non-wallet PSBT code to src/psbt.{h,cpp}, and PSBT wallet code to
src/wallet/psbtwallet.{h,cpp}. This commit contains only code movement (and
adjustments to includes and Makefile.am.)
Factor out a new BroadcastTransaction function, performing the core work of the
sendrawtransaction rpc, so that it can be used from the GUI code. Move it from
src/rpc/ to src/node/.
Split up DecodePSBT, which both decodes base64 and then deserializes a
PartiallySignedTransaction, into two functions: DecodeBase64PSBT, which retains
the old behavior, and DecodeRawPSBT, which only performs the deserialization.
Add a test for base64 decoding failure.
Add support for the optional "pf_invalid" out parameter (which allows the caller
to detect decoding failures) to the std::string versions of DecodeBase32 and
DecodeBase64. The char* versions already have this feature.
Also, rename all uses of pfInvalid to pf_invalid to match style guidelines.
50e647210d Move ParseConfirmTarget from rpc/mining to rpc/util (Russell Yanofsky)
Pull request description:
Util is a better home since it's called both by wallet and mining code.
Suggested https://github.com/bitcoin/bitcoin/pull/15288#discussion_r254449444
Tree-SHA512: 4320caf2a3f70d2885c421de04f2ec68ff3f6519258c5155fc46e245dc1765fd15c81f260af5096318f24ff9deb88fc3c5ef40eec8b7393f467f5b963d17215b
30d0f7be6e rpc: Fix for segfault if combinepsbt called with empty inputs (benthecarman)
Pull request description:
Fixes#15300
Tree-SHA512: 25e7b4e6e48d8b0d197f0ab96df308fff33e2110f8929cb48914877fa7f4c4a84f173b1378fdb2dec5d03fe7d6d1aced4b577e55f9fe180d8147d9106ebf543f
7687f7873 [wallet] Support creating a blank wallet (Andrew Chow)
Pull request description:
Alternative (kind of) to #14938
This PR adds a `blank` parameter to the `createwallet` RPC to create a wallet that has no private keys initially. `sethdseed` can then be used to make a clean wallet with a custom seed. `encryptwallet` can also be used to make a wallet that is born encrypted.
Instead of changing the version number as done in #14938, a wallet flag is used to indicate that the wallet should be blank. This flag is set at creation, and then unset when the wallet is no longer blank. A wallet becomes non-blank when a HD seed is set or anything is imported. The main change to create a blank wallet is primarily taken from #14938.
Also with this, the term "blank wallet" is used instead of "empty wallet" to avoid confusion with wallets that have balance which would also be referred to as "empty".
This is built on top of #15225 in order to fix GUI issues.
Tree-SHA512: 824d685e11ac2259a26b5ece99c67a7bda94a570cd921472c464243ee356b7734595ad35cc439b34357135df041ed9cba951e6edac194935c3a55a1dc4fcbdea
A blank wallet is a wallet that has no keys, script or watch only things.
A new wallet flag indicating that it is blank will be set when the wallet
is blank. Once it is no longer blank (a seed has been generated, keys or
scripts imported, etc), the flag will be unset.
faa46475d7 wallet: Add lock annotation for mapAddressBook (MarcoFalke)
Pull request description:
This adds lock annotations for `mapAddressBook` and also moves one lock from inside `GetDestValues` to the caller to be in line with the other methods (`eraseDestData`, `addDestData`, ...)
Tree-SHA512: cef9397523e2f5717d4a9a6b2da1fe07042484a51b3c067ae64425768637f334350a2c3db4ab7e00af99b2a587f6b656b68ee1195f6a3db6d47298d0b2b6174a
eea02be70e Add locking annotation for vNodes. vNodes is guarded by cs_vNodes. (practicalswift)
Pull request description:
Add locking annotation for `vNodes`. `vNodes` is guarded by `cs_vNodes`.
Tree-SHA512: b1e18be22ba5b9dd153536380321b09b30a75a20575f975af9af94164f51982b32267ba0994e77c801513b59da05d923a974a9d2dfebdac48024c4bda98b53af
1cff3d6cb0 Change in transaction pull scheduling to prevent InvBlock-related attacks (Gleb Naumenko)
Pull request description:
This code makes executing two particular (and potentially other) attacks harder.
### InvBlock
This behavior was described well [here](https://www.cs.umd.edu/projects/coinscope/coinscope.pdf) (page 11).
Per current implementation, if node A receives _INV_ (tx) from node B, node A sends _GETDATA_ to B and waits for _TX_ message back.
Node A is likely to receive more _INVs_ (regarding the same tx) from other peers. But node A would not send another _GETDATA_ unless it does not hear _TX_ back from node B for next 2 minutes (to save bandwidth)
Thus, if B is a malicious node, it can prevent node A from getting the transaction (even if all A’s peers have it) for 2 minutes.
This behavior seems to be an inherent limitation of the current P2P relay protocol, and I don’t see how it can be fundamentally changed (I can see workarounds which involve rewriting a lot of P2P code though).
### What does this PR fix?
The attacks I’m looking at involve preventing A from learning the transaction for 2*N minutes. To do that, an attacker has to spin up N nodes and send N _INVs_ simultaneously to node A (then InvBlocks will be queued with an interval of 2 minutes according to current implementation)
More precisely, 2 scenarios I’m looking at are:
1. An attacker censors a particular transaction. By performing InvBlock from different nodes, an attacker can execute a network-wide censorship of a particular transaction (or all transactions). The earlier an attacker founds the transaction he wants to censor, the easier it is to perform an attack. As it was pointed out by @gwillen, this is even more dangerous in the case of lightning, where transactions are known in advance.
2. Topology inference described in papers [1](https://www.cs.umd.edu/projects/coinscope/coinscope.pdf), [2](https://arxiv.org/pdf/1812.00942.pdf) involve network-wide InvBlock. This fix would not mitigate this type of inference, but I believe it will make it more expensive to perform (an attacker would have to create more transactions and perform more rounds to learn the topology, the second paper itself notes that InvBlock isolation is important for the attack).
### How does it work
This PR introduces bias toward outbound connections (they have higher priority when a node chooses from whom it should request a transaction) and randomizes the order.
As per @gmaxwell suggestion, GETDATA requests queue is created after processing all incoming messages from all nodes.
After this fix, if the incoming messages were [I1, I2, I3, O1, O2, O3, O4], the queue for _GETDATA_ may look like [O2, O1, O3, O4, I1, I3, I2, ….].
If {I1, I2, I3} were significantly earlier (but the difference is less than TX_TIMEOUT=60 s) than others, the queue for _GETDATA_ may look like [I2, O2, O1, O3, O4, I1, I3, ….].
### Other comments:
1. This mitigation works better if the connectivity is higher (especially outbound, because it would be less likely that 2 _GETDATAs_ for inbound malicious nodes queued together)
Tree-SHA512: 2ad1e80c3c7e16ff0f2d1160aa7d9a5eaae88baa88467f156b987fe2a387f767a41e11507d7f99ea02ab75e89ab93b6a278d138cb1054f1aaa2df336e9b2ca6a
b985e9c850 Add release notes for importmulti descriptor support (MeshCollider)
fbb5e935ea Add test for importing via descriptor (MeshCollider)
9f48053d8f [wallet] Allow descriptor imports with importmulti (MeshCollider)
d2b381cc91 [wallet] Refactor ProcessImport() to call ProcessImportLegacy() (John Newbery)
4cac0ddd25 [wallet] Add ProcessImportLegacy() (John Newbery)
a1b25e12a5 [wallet] Refactor ProcessImport() (John Newbery)
Pull request description:
~~Based on #14454#14565, last two commits only are for review.~~
Best reviewed with `?w=1`
Allows a descriptor to be imported into the wallet using `importmulti` RPC. Start and end of range can be specified for ranged descriptors. The descriptor is implicitly converted to old structures on import.
Also adds a simple test of a P2SH-P2WPKH address being imported as a descriptor. More tests to come, as well as release notes.
Tree-SHA512: 160eb6fd574c4ae5b70e0109f7e5ccc95d9309138603408a1114ceb3c558065409c0d7afb66926bc8e1743c365a3b300c5f944ff18b2451acc0514fbeca1f2b3
595283851 [rpc] util: add deriveaddresses method (Sjors Provoost)
Pull request description:
Usage:
```sh
bitcoin-cli deriveaddresses "wpkh([d34db33f/84h/0h/0h]xpub6DJ2dNUysrn5Vt36jH2KLBT2i1auw1tTSSomg8PhqNiUtx8QX2SvC9nrHu81fT41fvDUnhMjEzQgXnQjKEu3oaqMSzhSrHMxyyoEAmUHQbY/0/0)"
[
"bc1qg6ucjz7kgdedam7v5yarecy54uqw82yym06z3q"
] // part of the BIP32 test vector
```
Avoids the need for external (BIP32) libraries to derive an address. Can be used in conjunction with `scantxoutset` as a poor mans wallet. Might be useful to test more complicated future descriptors.
~To keep it as simple as possible it only supports descriptors that result in a single address, so no `combo()` and ranges.~
As discussed recently on IRC it might make sense to put this in a separate utility along with other descriptor and psbt utility functions which don't need a chain or wallet context. However I prefer to leave that to another PR.
Tree-SHA512: b8e53db11a8fd87638cc98766270cc3be9adc4b3e5085798a6a4e2e6ad252bf6d2189346bbb2da72d04d13f7f1e80b5cb88e8039653bea1f150602a876ef7f34
87aa0b48af netaddress: Make IPv4 loopback comment more descriptive (Carl Dong)
6180b5f32b netaddress: Fix indentation in IsLocal (Carl Dong)
Pull request description:
This also makes the comment match the IPv6 comment just below this hunk.
Tree-SHA512: 9b91195e71e18156c9e013f63a6d430c67951aabb4a0c2f48f3bf852570c13887572b9e2fa52f4e1beba8685a9cae8949d4d03cd618a78f88566cf9e85dc64a8
fa2a69fcb9 doc: Add cs_main lock annotations for mapBlockIndex (practicalswift)
Pull request description:
Marked as "doc" because it didn't change the bitcoind on my system with default configure settings for both gcc and clang.
Tree-SHA512: ba203f16c1cdc834a61c65bb5fb20bbaf7d8bff0c3a1b8ef46bc1d3669092191221e26abd7e580efab2f9bd5a992dc363251f1b68c6cd68f8204d62675868cf1
e8db6b8044 Qt: Fix update headers-count (Jonas Schnelli)
7bb45e4b7a Qt: update header count regardless of update delay (Jonas Schnelli)
Pull request description:
Update the block and header tip is constraint to have a minimal distance of 250ms between updates... which can lead to miss the last header update.
The modal overlay then assumes we are still in header sync and the view get stuck in "syncing headers,..." (while it's actually syncing blocks).
This removes the 250ms minimal delta for header updates as well as it fixes the correct display of how header updates should update the labels.
Tree-SHA512: 57608dac822b135cd604fc6ba1c80f25c0202a6e20bb140362026615d4bf243ef4fcc254a11bad36419c554a222a2f4947438d4ce44aa14041d1874751643d68
47012391ec [Docs] Small updates to getrawtransaction description (Amiti Uttarwar)
Pull request description:
As per review comments on https://github.com/bitcoin/bitcoin/pull/15159
Tree-SHA512: 0bbbe956b47d177f7e67c5ab2048287783327d9e07a679d64d79aee3ea8633e769f75b59d3dbce517924ba5d64d6c44f26bf49e16d40612463e460ad1a238129
ef0b01217a tests: Make updatecoins_simulation_test deterministic (practicalswift)
Pull request description:
Make test `updatecoins_simulation_test` deterministic.
Can be verified using `contrib/test_deterministic_coverage.sh` introduced in #15296.
Related:
* #15296: "tests: Add script checking for deterministic line coverage in unit tests"
* #15324: "test: Make bloom tests deterministic"
* #14343: "coverage reports non-deterministic"
Tree-SHA512: 3466e28a42dd3735effb8542044d88e8350a470729d4a4f02abce9d6367de6568d698131469ba154d3dc76d448bacb360b7aefd066bb5b91408c0be375dd3ecb
364cff1cab Fix issue #9683 "gui, wallet: random abort (segmentation fault) running master/HEAD". (Chris Moore)
Pull request description:
Patch taken from @ryanofsky's comment https://github.com/bitcoin/bitcoin/issues/9683#issuecomment-448035913.
[MarcoFalke wrote](https://github.com/bitcoin/bitcoin/issues/9683#issuecomment-454066004):
> Mind to submit this patch as a pull request?
So that's what I'm doing.
I was regularly seeing crashes on startup before applying this patch and haven't seen a single crash on startup since applying it almost a month ago.
Tree-SHA512: 3bbb2291cdf03ab7e7b5b796df68d76272491e35d473a89f4550065554c092f867659a7b8d7a1a91461ae4dc9a3b13b72541eafdbd732536463e9f3cf82300c8
0164b0f5cf build: Remove WINVER pre define in Makefile.leveldb.inlcude (Chun Kuan Lee)
d0522ec94e Drop defunct Windows compat fixes (Ben Woosley)
d8a2992067 windows: Call SetProcessDEPPolicy directly (Chun Kuan Lee)
1bd9ffdd44 windows: Set _WIN32_WINNT to 0x0601 (Windows 7) (Chun Kuan Lee)
Pull request description:
The current minimum support Windows version is Vista. So set it to 0x0600
5a88def8ad/mingw-w64-headers/include/sdkddkver.h (L19)
Tree-SHA512: 38e2afc79426ae547131c8ad3db2e0a7f54a95512f341cfa0c06e4b2fe79521ae67d2795ef96b0192e683e4f1ba6183c010d7b4b8d6b3e68b9bf48c374c59e7d
851380ce17 remove deprecated mentions of signrawtransaction from fundraw help (Gregory Sanders)
Pull request description:
RPC call has been removed as of 0.17.99.
Tree-SHA512: a6a12a0e4572acd9b532c1719be85ed6f29d1c1a28f9ce691398528b8dde4fb4a3222b8f68632fcb1a8eddfe2d31e96d5efd5bc51c041af8e7cb99b61ca3a167
aebafd0edf Rename Chain getLocator -> getTipLocator (Russell Yanofsky)
2c1fbaa771 Drop redundant get_value_or (Russell Yanofsky)
84adb206fc Fix ScanForWalletTransactions start_block comment (Russell Yanofsky)
2efa66b464 Document rescanblockchain returned stop_height being null (Russell Yanofsky)
db2d093233 Add suggested rescanblockchain comments (Russell Yanofsky)
a8d645c934 Update ScanForWalletTransactions result comment (Russell Yanofsky)
95a812b599 Rename ScanResult stop_block field (Russell Yanofsky)
Pull request description:
This implements suggested changes from #14711 review comments that didn't make make it in before merging.
There are no changes in behavior in this PR, just documentation updates, simplifications, and variable renames.
Tree-SHA512: 39f1a5718195732b70b5e427c3b3e4295ea5af6328a5991763a422051212dfb95383186db0c0504ce2c2782fb61998dfd2fe9851645b7cb4e75d849049483cc8
This commit adds a ProcessImportLegacy() function which
currently does nothing. It also unindents a block of
code for a future move-only change.
Reviewer hint: review with -w to ignore whitespace changes.
This commit is move-only and doesn't make any functional changes. It
simply moves code around within ProcessImport() in preparation for
refactors in the next commits.
77777c5624 log: Construct global logger on first use (MarcoFalke)
Pull request description:
The (de)initialization order is not well defined in C++, so generally it is not safe to use globals as the (de/con)structor of one global could use the (de/con)structor of another global before/after it has been (con/de)structed.
Specifically this fixes:
* `g_logger` might not be initialized on the first use, so do that. (Fixes#15111)
Tree-SHA512: eb9c22f4baf31ebc5b0b9ee6a51d1354bae1f0df186cc0ce818b4483c7b5a7f90268d2b549ee96b4c57f8ef36ab239dc6497f74f3e2ef166038f7437c368297d
- Update transifex slug
- Mention update of MSVC build in `doc/translation_process.md`
- Do a `make translate` to update English translations
- Pull current translations from transifex
712d35bc56 wallet: Add missing cs_db lock (João Barbosa)
Pull request description:
Without this lock `BerkeleyEnvironment::~BerkeleyEnvironment` and `GetWalletEnv` would race for `g_dbenvs`. This wasn't detected before because thread safety analysis does not check constructors
and destructors.
Reference: http://releases.llvm.org/5.0.2/tools/clang/docs/ThreadSafetyAnalysis.html#no-checking-inside-constructors-and-destructors
Tree-SHA512: 350cb2b991ca699a6bca85f87c82c38f0814484c8ccb0d7d83cb3bff9afcf60dd32b2a9554a9e72eb5803bfad8b6970fe7da618b39be5889178b86faa1b74124
fae169c95e test: Make bloom tests deterministic (MarcoFalke)
Pull request description:
non-deterministic tests are useless, since a failing test could not be reproduced unless the seed is known.
Tree-SHA512: 4f634ff0c6adf663444f1ac504f6dbceaa46b78d697b840531977ba30006453ac559d5c21cc3eaef6d92b87d46008a34b0db6331ea3318001987fcfaec634acf
This introduces support for autodetecting and using the RdSeed instruction.
In addition:
* In SeedFast, only 64 bits of entropy are generated through RdRand (256 was relatively slow).
* In SeedStartup, 256 bits of entropy are generated, using RdSeed (preferably) or RdRand (otherwise).
When a wallet is created it is registered in the validation interface (in
CWallet::CreateWalletFromFile) but it is not immediately added to the
wallets list. If a shutdown is requested before AddWallet (case more
evident when -rescan is set) then m_internals can be released (in
Shutdown -> UnregisterBackgroundSignalScheduler) before the wallet and
then ReleaseWallet would call UnregisterValidationInterface with
m_internals already released.
This change forwards the shutdown request on the GUI (close the
application for instace) to the node as soon as possible. This way the
GUI doesn't have to wait for long operations to complete (rescan the
wallet for instance), instead those operations detect the shutdown
request and abort/interrupt.
Move only change that makes unsubscribeFromCoreSignals public. It must be
called if the event loop is not running otherwise core signals handlers
can deadlock.
11e0fd8d6 Descriptor expansions only need pubkey entries for PKH/WPKH (Pieter Wuille)
Pull request description:
Currently, calling `Expand` on a `Descriptor` object will populate the output FlatSigningProvider with all public keys involved in the descriptor. This is overkill, as pubkey entries are only needed when the lookup of a public key based on its hash is desired (which is the case for `pkh`, `wpkh`, and `combo` descriptors).
Fix this by pushing the population of pubkey entries down into the individual descriptor implementation's `MakeScript` function, instead of doing it generically.
This should make it easier to implement #14491 without importing P2PKH outputs for the individual public keys listed inside a multisig.
Tree-SHA512: 5bc7e9bd29f1b3bc63514803e9489b3bf126bfc177d46313aa9eeb98770ec61a97b55bd8ad4e2384154799f24b1bc4183bfdb4708b2ffa6e37ed2601a451cabc
Without this lock BerkeleyEnvironment::~BerkeleyEnvironment and
GetWalletEnv would race for g_dbenvs. This wasn't detected before
because thread safety analysis does not check constructors and
destructors.
119d360aab travis: Document whether functional tests are run in the job name (Ben Woosley)
64f28545e3 Revert "travis: Compile trusty with depends for now" (Ben Woosley)
267eac00f9 Prefer boost::optional#get_value_or over #value_or (Ben Woosley)
1971f5ba04 Piecewise construct to avoid invalid construction (Ben Woosley)
Pull request description:
In light of #14979, I realized that only qt 5.5+ was being tested under CI, while compatibility lists 5.2+.
In #15276, Marco added Trusty to CI, building with depends. This changes that build to system libraries, in order to ensure ongoing compatibility with our claimed minimum required versions.
Fixes#14983, previously open as #14998
Tree-SHA512: 6cff5e28c756ecb8bf797c8f6eb77c1944ba61a8dd6d7d4984e63eef384f6429dc79c505da3241c05b9c4db31c72b2a9846c7365aba9280f2e0620e5f3998d07
e6c58d3b01 Do not import private keys to wallets with private keys disabled (Andrew Chow)
b5c5021b64 Refactor importwallet to extract data from the file and then import (Andrew Chow)
1f77f6754c tests: unify RPC argument to cli argument conversion and handle dicts and lists (Andrew Chow)
Pull request description:
Fixes a bug where private keys could be imported to wallets with private keys disabled. Now every RPC which can import private keys checks for whether the wallet has private keys are disabled and errors if it is. Also added an belt-and-suspenders check to `AddKeyPubkeyWithDB` to have it assert that the wallet has private keys enabled.
Tree-SHA512: 5cd04febce9aa2bd9bfd02f312c6ff8705e37278cae59efd3895f6d6e2f1b477aefd297e2dd0860791bdd3d4f3cad8eb1a404f8f3d4e2035b91314ad2c1028ae
In CMainSignals::RegisterWithMempoolSignals running under Ubuntu 14.04
(QT 5.2), absent piecewise construction this fails to create the pair
because the argument is a connection, which is converted into a
non-copyable scoped_connection.
validationinterface.cpp:80:186: required from here
/usr/include/boost/signals2/connection.hpp:234:7: error: ‘boost::signals2::scoped_connection::scoped_connection(const boost::signals2::scoped_connection&)’ is private
scoped_connection(const scoped_connection &other);
^
In file included from /usr/include/c++/4.8/utility:70:0,
from /usr/include/c++/4.8/algorithm:60,
from ./prevector.h:13,
from ./script/script.h:10,
from ./primitives/transaction.h:11,
from ./validationinterface.h:9,
from validationinterface.cpp:6:
/usr/include/c++/4.8/bits/stl_pair.h:134:45: error: within this context
: first(std::forward<_U1>(__x)), second(__y) { }
https://travis-ci.org/bitcoin/bitcoin/jobs/473689141#L2172
