de487b7 Tests: Add test for getnetworkhashps (Jimmy Song)
Tree-SHA512: b1418ad904618f639ffa34dd40906692aff1fdf1a0d13a9af00039e7a6a2b758091734b89c0c91e8d455da6b15a0e435a9a9ca97a41d97bf395b844c761ffa27
Change the logic of estimateSmartFee to check a 60% threshold at half the target, a 85% threshold at the target and a 95% threshold at double the target. Always check the shortest time horizon possible and ensure that estimates are monotonically decreasing. Add a conservative mode, which makes sure that the 95% threshold is also met at longer time horizons as well.
Checks memory before and after a transaction that requires a private key.
Each time, 32 bytes of memory for a private key should be used.
Tested in wallet.py instead of its own file to save testing time.
329ac3b [tests] use wait_until in mempool_persist.py (John Newbery)
Tree-SHA512: 3f5fe3dcdb5da3b10a41f7b88d29c15b79c02fbb037914b4342b77428f2afe8b342f6adacb28a9eb5549aa156cd146175389bd61909a20df3fecb88361c4779f
20187e4 test: Add elapsed time to RPC tracing (Wladimir J. van der Laan)
Tree-SHA512: f271acedd14020cf911711577f6dd940850fa84d2577618af06a2247c940fcc5b339a86c1c7a179899c556d217a6c967c785fb311bba43a9b6073cbe470b6737
4550049 Reorganize BitcoinTestFramework class (John Newbery)
b7dd44c Add start and stop node methods to BitcoinTestFramework (John Newbery)
b111324 move initialize_chain() and initialize_chain_clean() to be methods of BitcoinTestFramework (John Newbery)
Tree-SHA512: 17e541aea8ca4c0d1189701499384e26239e2d5905de8adb0f042d3cf4c0bbed79fcaad61d563e1743bf4c62ad4915cebb4714783db839d9c53dfbbedcae6e9a
f19abd9 [qa] Fixes segwit block relay test after inv-direct-fetch was disabled (Suhas Daftuar)
Tree-SHA512: 4df0074cbf3d9d31b7906026dc3296b143c252a81aef47eee0bcdf6cddc2501f83cb8d1b5a13256f9d7e889306d4435f260c1fa827573ae8569bb241a89a5f82
This test was passing because we never fetch blocks if we only receive
an inv and not the header (after 037159cebf),
and this test wasn't delivering the header.
Policy limits (such as chain limits and mempool total size) could reasonably
be enforced more aggressively during a reorg, so use resendwallettransactions
to repopulate the mempool to avoid mined blocks being too small, and increase
the chain limits from the default for this test.
This is in preparation for a change in mempool behavior during a reorg.
The functional tests and util tests both require a config file that is
generated by ./configure. This commit merges those two config
files into a single configuration file that can be shared by both tests.
The config from config.ini is put into a Namespace object to maintain
the interface with bctest.py. A future commit could change this
interface to use a dictionary instead of a namespace.
a750d77 Add tests for mempool persistence (John Newbery)
91c91e1 Control mempool persistence using a command line parameter. (John Newbery)
Tree-SHA512: 157d01cefd1903b8bfc5cbab42a3cc5e9c1094179bf4b64b3d34c0d4d9b976d593755bfea5c41c631cb758e1de17c6c2058c130d487d20560b7c0bafcddfa520
b8251f6 [tests] allow zmq test to be run in out-of-tree builds (John Newbery)
Tree-SHA512: 6946d23bc8a0b57e841a6811989182732d0534989e0e3b94421387f7971379b25a25d238cad22272e04076293275f6e980c8a713fce87ba48c1c4463d9243051
dadfee3 [test] Add test for listaddressgroupings (Jimmy Song)
Tree-SHA512: 21cf0233c7fcf585f9a31306612ae1113ea916d2972b834efef0cb2154bd4dd24d9746d0632c778c699328f7e7a336d2da6e2bac9f0fb657c30290757563ad22
d6732d8 [tests] update disconnect_ban.py test case to work with listbanned (John Newbery)
77c54b2 [net] listbanned RPC and QT should show correct banned subnets (John Newbery)
Tree-SHA512: edd0e43377d456260d2697213c2829f8483630f3a668b6707d52605faefa610d951d10e6f22a95eff483cbd14faa8ac9b69fa7d3c0b5735c5f3df23fd71282e0
7c58863 [Wallet] unset change position when there is no change on exact match (Gregory Sanders)
Tree-SHA512: ce8b9337e4132e32d80f954258d50938052c833a48e39431649d6adb16e3d18626a0ae5d300827e7fa397927fba72a1f066cb31af9b0a3ef7f1feb6024461626
* Split run_test into 4 separate tests
* Add 2 tests, getconnectioncount and getnettotals
* getnettotals - Strategy of test is to get the network stats before and after a ping. The difference in bytes sent/received is the bytes needed for a ping/pong.
6803e09 Move zmq test skipping logic into individual test case. (John Newbery)
Tree-SHA512: 9d166b53e9acf386c4dafc860b38e2901b331a7505bba9714a2f4e3bdef68b0316c8b76fddbfb620835ddee549cf32fffb3a96a19b0799ad94f2553f55f19a35
821dd5e Tests: Add test for getdifficulty (Jimmy Song)
Tree-SHA512: 3da78c4f88efdaab8374582cda606620beb2f1e9a93119a72b67572702c17c36b68c3abf9d466e8c7fb8ba9e8afa9a172e454c553df10d3054f19b3282d3097b
This commit uses the new skip test funcationality added in
232b6665bc to skip the zmq tests if the
python zmq module is not available or if bitcoind has been built without
zmq support.
This removes the zmq-specific logic from test_runner.py. In general it's
better if test_runner.py has no knowledge of special cases for
individual tests and is a general purpose test runner.
All Node classes in individual test cases subclass from NodeConnCB. Many
have duplicate definitions for methods that are defined in the base
class. This commit removes those duplicate definitions.
This commit removes ~290 lines of duplicate code.
This commit adds some helper functions to NodeConnCB which are useful
for many tests:
- NodeConnCB now keeps track of the number of each message type that
it's received and the most recent message of each type. Many tests
assert on the most recent block, tx or reject message.
- NodeConnCB now keeps track of its connection state by setting a
connected boolean in on_open() and on_close()
- NodeConnCB now has wait_for_block, wait_for_getdata,
wait_for_getheaders, wait_for_inv and wait_for_verack methods
I have updated the individual test cases to make sure that there are no
namespace problems that cause them to fail with these new definitions.
Future commits will remove the duplicate code.
637706d Tests: Put Extended tests first when they're included (Jimmy Song)
Tree-SHA512: 0a720b2443b3e65f4ad548ecdf822468460fc4f4ecf32385dd79511a01c9ea4c94f0bf765ca593705b19baee1bae254dfcc3952da64b9c51d75b7da7abcdcd28
maxblocksinflight tested that a node would not send get_data messages
for more than 16 new blocks at the same time. bitcoin core no longer
responds to block invs with get_data, since it does headers-first
sync'ing. This test was therefore testing nothing and can be removed.
the sendheaders test script tests that bitcoin will not send get_headers
for more than 16 blocks simultaneously.
This commit reduces spammy logging by the test framework. It truncates
logging send/receive message in mininode to 500 characters. mininode
was previously logging the entire message sent received, which can be up
to 1MB for a full block.
a4fd89f Make forknotify.py more robust (John Newbery)
1f3d78b Wait for connection to open in bip9-softforks.py (John Newbery)
Tree-SHA512: de7d0002ee62ad97059b6f6c89b11f6e9901e3b4164ef6906bcd61e4ca499c277d9034784755966e5baf599869fad611b0b18f5547a384ceb5b7db3cc5bbd132
sync_with_ping currently returns false if the timeout expires, and it is
the caller's responsibility to fail the test. However, none of the tests
currently assert on sync_with_ping()'s return code. This commit adds an
assert to sync_with_ping so the test will fail if the timeout expires.
This commit also removes all the duplicate implementations of
sync_with_ping() from the individual tests.
p2p-compactblocks was incorrectly using sync_with_ping() when sending in
invalid block. The node would disconnect us and never respond to the
ping, so the sync_with_ping would just time out after 30 seconds and
continue with the test.
This commit adds a send_await_disconnect() method that sends the
message, and then waits for the node to disconnect us. In this commit
I've added the method to p2p-compactblocks.py, but a future commit could
move it to mininode since it could be useful more generally.
This commit reduces the p2p-compactblock runtime by 30 seconds.
4115af7 Fix rebase issue where pwalletMain was used instead of pwallet Ser./Deser. nInternalChainCounter as last element (Jonas Schnelli)
9382f04 Do not break backward compatibility during wallet encryption (Jonas Schnelli)
1df08d1 Add assertion for CanSupportFeature(FEATURE_HD_SPLIT) (Jonas Schnelli)
cd468d0 Define CWallet::DeriveNewChildKey() as private (Jonas Schnelli)
ed79e4f Optimize GetOldestKeyPoolTime(), return as soon as we have both oldest keys (Jonas Schnelli)
771a304 Make sure we set the wallets min version to FEATURE_HD_SPLIT at the very first point (Jonas Schnelli)
1b3b5c6 Slightly modify fundrawtransaction.py test (change getnewaddress() into getrawchangeaddress()) (Jonas Schnelli)
003e197 Remove FEATURE_HD_SPLIT bump TODO (Jonas Schnelli)
d9638e5 Overhaul the internal/external key derive switch (Jonas Schnelli)
1090502 Fix superfluous cast and code style nits in RPC wallet-hd.py test (Jonas Schnelli)
58e1483 CKeyPool avoid "catch (...)" in SerializationOp (Jonas Schnelli)
e138876 Only show keypoolsize_hd_internal if HD split is enabled (Jonas Schnelli)
add38d9 GetOldestKeyPoolTime: if HD & HD Chain Split is enabled, response max(oldest-internal-key, oldest-external-key) (Jonas Schnelli)
dd526c2 Don't switch to HD-chain-split during wallet encryption of non HD-chain-split wallets (Jonas Schnelli)
79df9df Switch to 100% for the HD internal keypool size (Jonas Schnelli)
bcafca1 Make sure we always generate one keypool key at minimum (Jonas Schnelli)
d0a627a Fix issue where CDataStream->nVersion was taken a CKeyPool record version (Jonas Schnelli)
9af8f00 Make sure we hand out keypool keys if HD_SPLIT is not enabled (Jonas Schnelli)
469a47b Make sure ReserveKeyFromKeyPool only hands out internal keys if HD_SPLIT is supported (Jonas Schnelli)
05a9b49 Fix wrong keypool internal size in RPC getwalletinfo help (Jonas Schnelli)
01de822 Removed redundant IsLocked() check in NewKeyPool() (Jonas Schnelli)
d59531d Immediately return setKeyPool's size if HD or HD_SPLIT is disabled or not supported (Jonas Schnelli)
02592f4 [Wallet] split the keypool in an internal and external part (Jonas Schnelli)
Tree-SHA512: 80d355d5e844b48c3163b56c788ab8b5b5285db0ceeb19858a3ef517d5a702afeca21dbae526d7b8fb4101c2a745af1d92bf557c40cf516780f17992bf678c1a
forknotify would intermittently fail because the alert file was not
being written fast enough. This commit adds a timeout so the test does
not fail immediately.
bip9-sofforks.py stop-starts the bitcoind node twice during the test
run, but it doesn't wait for the connection from mininode to open before
continuing with the test. This leads to race conditions where the test
can fail getblocktemplate() because it has no p2p connections.
This commit merges the NodeConnCB and SingleNodeConnCB into a single
class (called NodeConnCB). The original intent for the NodeConnCB was to
be able to have a python 'mininode' connect to multiple running
bitcoinds. This has never been used and can be achieved more easily by
having multiple NodeConns backed by a common datastore if it is ever
needed.
The changes in mininode.py are just code moves (and merging the two
classes into a single class). The code changes in the individual test
cases are changing the subclasses to subclass from NodeConnCB instead of
SingleNodeConnCB. There is a lot of duplicate code in the subclasses
that can be removed in future commits.
fa4535d [qa] combine_logs: Use ordered list for logfiles (MarcoFalke)
Tree-SHA512: 66da6f2659018d24b1cac1f6d2ee8603c2c6f15ce5aff456e8e4b208874e97c7046b97112046d5b45bfd777b405771a3ad0a55036c4f4cdeec06842563af2c4d
29d6634 Check that all test scripts in test/functional are being run (John Newbery)
Tree-SHA512: 9231d3a119632be031c51c4f7e95a8adae58489a8ec36fc967d499c0708bae2941a3bf28f11dcd4efd59141eb54c3c920f2629f5cd8a0139d30397a19591666d
rpt-tests.py outputs progress information as it runs tests. This commit
adds a --quiet option that suppresses that progress output and only
prints a summary of results (and logs from failed tests).
b1f584d fix build if spaces in src dir path (Matthew Zipkin)
Tree-SHA512: 5834690c1f63b85ed04bb8ed411a94da04738534364d58bd9ee333ccff7129b2bbb710f31598c40123199e023da02c1745514294af3efdbb2c2e4c1320aded35
assumevalid was merged as part of PR 9484, but was not added to the
test_runner, so is not run even as part of the extended tests.
This commit adds assumevalid to the list of tests in test_runner. It
also clarifies the code in assumevalid considerably.
0c1ade6 Skip rpcbind_test if OS/network requirements are not met. (John Newbery)
232b666 Allow test cases to be skipped (John Newbery)
Tree-SHA512: d90c956ba6e27e53f422cba6267bdcc60faef9370a7e66b7f6480137f84d9a813442ac477b20fbbc540be2b4636928be910c46e221570ab3b9a5b9f0f11f7fc8
Currently, functional test cases can either pass or fail. There are
occasions when it is helpful to skip tests, for example if the
system they are running on does not meet the requirements for the test.
The rest of the test suite can run without being marked as a failure.
This commit adds framework for tests to skip if their requirements
aren't met.
This commit adds a tool for combining log files from multiple instances
of bitcoinds as well as the test_framework.log file. This gives a
combined view of what the test framework and all bitcoin instances were
doing during a qa test.
Change bumpfee tests to use the spend_one_input function instead of the
create_fund_sign_send function. The latter function would choose transaction
inputs and fees in unpredictable ways depending on the order that tests ran,
which meant that adding new tests could cause old tests to fail, and in general
made bumpfee.py fragile and unpleasant to work with.
